lib/matrix: inline common Vector3f operators

PX4 ROS2 msg conformity and explicit topics
- .msg files are PascalCase - topics are still either per msg or explicitly listed in TOPICS - compatible structs are still generated (eg struct msg_s), but ROS2 style px4::msg::Msg is also available
2026-05-24 09:07:34 +08:00 · 2022-01-21 12:53:26 -05:00 · 2022-01-21 09:32:30 -05:00
1764 changed files with 29727 additions and 108902 deletions
@@ -28,7 +28,7 @@ pipeline {
          ]

          def base_builds = [
-            target: ["px4_sitl_default"],
+            target: ["px4_sitl_rtps"],
            image: docker_images.base,
            archive: false
          ]
@@ -52,29 +52,23 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
                     "freefly_can-rtk-gps_canbootloader",
                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
                     "holybro_can-gps-v1_default",
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
-                     "matek_gnss-m9n-f4_canbootloader",
-                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
+                     "matek_h743-slim",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_ctrl-zero-h7_default",
                     "mro_ctrl-zero-h7_rtps",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_pixracerpro_default",
                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
@@ -89,28 +83,24 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
+                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
-                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
            ],
@@ -73,8 +73,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
                }
              }
@@ -143,8 +145,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
                }
              }
@@ -213,8 +217,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
                }
              }
@@ -282,8 +288,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
                }
              }
@@ -352,8 +360,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
                }
              }
@@ -442,8 +452,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
                }
              }
@@ -524,8 +536,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
                }
              }
@@ -594,8 +608,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
                }
              }
@@ -664,8 +680,10 @@ pipeline {
                }
              }
              post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
                }
              }
@@ -705,21 +723,18 @@ void quickCalibrate() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
-
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }
@@ -778,7 +793,7 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  // stop logger
@@ -794,7 +809,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 4018 6001 8001 10016'

  resetParameters()

@@ -847,7 +862,7 @@ void runTests() {
 void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'

  // these are for casually inspecting the system, output failure doesn't matter
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
@@ -864,7 +879,7 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report

 ---

-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.

-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.

-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
- Share the link to the log (Copy and paste the URL of the log)
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).

 Add screenshots to help explain your problem.

-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-## Additional context
+**Additional context**
 Add any other context about the problem here.
@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.
@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.

 ---

-## Attention! Please read the note below
-
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
+We use GitHub issues only to discuss PX4 bugs and new features. For
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).

 Thanks!
@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues

 ---

-## Attention! Please read the note below
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).

 Thanks!
@@ -20,7 +20,6 @@ jobs:
          ark_can-flow,
          ark_can-gps,
          ark_can-rtk-gps,
-          ark_cannode,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@@ -30,16 +29,12 @@ jobs:
          cuav_x7pro,
          cubepilot_cubeorange,
          cubepilot_cubeyellow,
-          diatone_mamba-f405-mk2,
          freefly_can-rtk-gps,
          holybro_can-gps-v1,
          holybro_durandal-v1,
          holybro_kakutef7,
          holybro_kakuteh7,
          holybro_pix32v5,
-          matek_gnss-m9n-f4,
-          matek_h743,
-          matek_h743-mini,
          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
@@ -55,17 +50,15 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
+          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
          px4_fmu-v4pro,
          px4_fmu-v5,
          px4_fmu-v5x,
-          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
-          raspberrypi_pico,
-          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
          ]
@@ -29,9 +29,9 @@ jobs:
        token: ${{ secrets.ACCESS_TOKEN }}

    - name: Download MAVSDK
-      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
    - name: Install MAVSDK
-      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"

    - name: Prepare ccache timestamp
      id: ccache_cache_timestamp
@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
-	path = src/drivers/cyphal/libcanard
-	url = https://github.com/opencyphal/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
+[submodule "src/drivers/uavcan_v1/libcanard"]
+	path = src/drivers/uavcan_v1/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
+	path = src/drivers/uavcan_v1/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -64,6 +64,3 @@
 	path = src/lib/crypto/libtommath
 	url = https://github.com/PX4/libtommath.git
 	branch = px4
-[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
-	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git
@@ -9,5 +9,3 @@ launch.json
 ipch/

 browse.vc.db*
-
-*.log
@@ -31,6 +31,11 @@ CONFIG:
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_test
+    px4_ros2_default:
+      short: px4_ros2
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_ros2_default
    px4_io-v2_default:
      short: px4_io-v2
      buildType: MinSizeRel
@@ -121,16 +126,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_cannode_default:
-      short: ark_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_default
-    ark_cannode_canbootloader:
-      short: ark_cannode_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_canbootloader
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -206,16 +201,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: matek_h743-slim_default
-    matek_gnss-m9n-f4_canbootloader:
-      short: matek_gnss-m9n-f4_canbootloader
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_m9nf4can_canbootloader
-    matek_gnss-m9n-f4_default:
-      short: matek_gnss-m9n-f4_default
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_gnss-m9n-f4_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -6,7 +6,7 @@
        "C_Cpp.autoAddFileAssociations": false,
        "C_Cpp.clang_format_fallbackStyle": "none",
        "C_Cpp.default.browse.limitSymbolsToIncludedHeaders": true,
-        "C_Cpp.default.cppStandard": "c++14",
+        "C_Cpp.default.cppStandard": "c++17",
        "C_Cpp.default.cStandard": "c11",
        "C_Cpp.formatting": "Disabled",
        "C_Cpp.intelliSenseEngine": "Default",
@@ -121,6 +121,7 @@
                "variant": "cpp",
                "vector": "cpp"
        },
+        "ros.distro": "foxy",
        "search.exclude": {
                "${workspaceFolder}/build": true
        },
@@ -136,5 +137,7 @@
        "yaml.schemas": {
                "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
        },
-        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
+        "python.autoComplete.extraPaths": [
+                "/opt/ros/foxy/lib/python3.8/site-packages"
+        ]
 }
@@ -99,7 +99,9 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
+
+cmake_policy(SET CMP0058 NEW)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -124,12 +126,6 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 BRIEF_DOCS "PX4 module libs"
                 FULL_DOCS "List of all PX4 module libraries"
                 )
-
-define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
-                 BRIEF_DOCS "PX4 kernel side module libs"
-                 FULL_DOCS "List of all PX4 kernel module libraries"
-                 )
-
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
@@ -138,30 +134,40 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
                 BRIEF_DOCS "src files from all PX4 modules & libs"
                 FULL_DOCS "SRC files from px4_add_{module,library}"
                 )
-
+define_property(GLOBAL PROPERTY PX4_PUBLICATIONS
+                 BRIEF_DOCS "PX4 publication topics"
+                 FULL_DOCS "List of topics published by PX4 modules"
+                 )
+define_property(GLOBAL PROPERTY PX4_SUBSCRIPTIONS
+                 BRIEF_DOCS "PX4 subscription topics"
+                 FULL_DOCS "List of topics subscribed by PX4 modules"
+                 )
 #=============================================================================
 # configuration
 #

-set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+# default to px4_ros2_default if building within a ROS2 colcon environment
+if((DEFINED ENV{COLCON_PREFIX_PATH}) AND (DEFINED ENV{ROS_VERSION}))
+	if("$ENV{ROS_VERSION}" MATCHES "2")
+		message(STATUS "ROS_VERSION: $ENV{ROS_VERSION}")
+		set(CONFIG "px4_ros2_default" CACHE STRING "desired configuration") # TODO
+	endif()
+endif()
+
+if(NOT CONFIG)
+	set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+endif()

 include(px4_add_module)
 set(config_module_list)
-set(config_kernel_list)

 # Find Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
+find_package(PythonInterp 3)
+# We have a custom error message to tell users how to install python3.
+if(NOT PYTHONINTERP_FOUND)
+	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+		"    macOS: brew install python")
 endif()

 option(PYTHON_COVERAGE "Python code coverage" OFF)
@@ -197,10 +203,6 @@ set_property(GLOBAL PROPERTY PX4_MODULE_CONFIG_FILES)
 include(platforms/${PX4_PLATFORM}/cmake/px4_impl_os.cmake)
 list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake)

-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
-	include(init)
-endif()
-
 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
 if(NOT CMAKE_BUILD_TYPE)
 	if(${PX4_PLATFORM} STREQUAL "nuttx")
@@ -234,17 +236,9 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")

-set(CMAKE_CXX_STANDARD 14)
+set(CMAKE_CXX_STANDARD 17)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
@@ -260,6 +254,10 @@ else()
 	SET(BUILD_SHARED_LIBS OFF)
 endif()

+if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
+	include(init)
+endif()
+
 #=============================================================================

 # gold linker - use if available (posix only for now)
@@ -329,13 +327,6 @@ if(NOT PX4_CHIP)
 	message(FATAL_ERROR "px4_os_determine_build_chip() needs to set PX4_CHIP")
 endif()

-#=============================================================================
-# build flags
-#
-include(px4_add_common_flags)
-px4_add_common_flags()
-px4_os_add_flags()
-
 #=============================================================================
 # board cmake init (optional)
 #
@@ -343,6 +334,13 @@ if(EXISTS ${PX4_BOARD_DIR}/cmake/init.cmake)
 	include(${PX4_BOARD_DIR}/cmake/init.cmake)
 endif()

+#=============================================================================
+# build flags
+#
+include(px4_add_common_flags)
+px4_add_common_flags()
+px4_os_add_flags()
+
 #=============================================================================
 # message, and airframe generation
 #
@@ -420,13 +418,17 @@ endif()
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
-add_library(kernel_parameters_interface INTERFACE)

 include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)

-add_subdirectory(platforms/${PX4_PLATFORM}/src/px4)
-add_subdirectory(platforms EXCLUDE_FROM_ALL)
+add_subdirectory(platforms/${PX4_PLATFORM}/src/px4 EXCLUDE_FROM_ALL)
+
+if(${PX4_PLATFORM} MATCHES "ros2") # TODO: fix
+	add_subdirectory(platforms/common/work_queue EXCLUDE_FROM_ALL)
+else()
+	add_subdirectory(platforms EXCLUDE_FROM_ALL)
+endif()

 if(EXISTS "${PX4_BOARD_DIR}/CMakeLists.txt")
 	add_subdirectory(${PX4_BOARD_DIR})
@@ -443,17 +445,131 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)

 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
-
-if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-target_link_libraries(parameters_interface INTERFACE usr_parameters)
-target_link_libraries(kernel_parameters_interface INTERFACE parameters)
-else()
 target_link_libraries(parameters_interface INTERFACE parameters)
-endif()

 # firmware added last to generate the builtin for included modules
 add_subdirectory(platforms/${PX4_PLATFORM})

+
+set(PX4_ORB_TOPIC_COUNT 0)
+
+if(${PX4_PLATFORM} MATCHES "ros2") # TODO: fix
+
+	configure_file(${CMAKE_SOURCE_DIR}/build/px4_fmu-v5x_default/uORBTopics.cpp ${CMAKE_BINARY_DIR}/uORBTopics.cpp COPYONLY)
+	configure_file(${CMAKE_SOURCE_DIR}/build/px4_fmu-v5x_default/uORBTopics.hpp ${CMAKE_BINARY_DIR}/uORBTopics.hpp COPYONLY)
+
+	set(PX4_ORB_TOPIC_COUNT 1)
+
+else()
+
+	get_property(publications GLOBAL PROPERTY PX4_PUBLICATIONS)
+	get_property(subscriptions GLOBAL PROPERTY PX4_SUBSCRIPTIONS)
+
+	# TODO: for now combine subsriptions and publications for complete topic list
+	list(APPEND publications ${subscriptions})
+
+	list(SORT publications)
+	list(REMOVE_DUPLICATES publications)
+
+	set(pub_all_topics)
+	set(PX4_MSG_TYPE_ID)
+	set(PX4_MSG_TOPIC_ID)
+	set(PX4_MSG_TOPIC_ID_STRING)
+	set(PX4_MSG_TOPIC_ORB_ID)
+
+	set(PX4_ORB_DECLARE_STR)
+	set(PX4_ORB_DEFINE_STR)
+	set(PX4_ORB_HEADER_INCLUDE_STR)
+
+
+	foreach(pub ${publications})
+		#message(STATUS "pub: ${pub}")
+		string(REPLACE " /" ";" pub ${pub})
+
+		list(GET pub 0 pub_type)
+		list(GET pub 1 pub_topic)
+
+		string(REPLACE "::" ";" pub_type_split ${pub_type})
+		list(GET pub_type_split 2 pub_type_simple_lower)
+
+		# Pascal case to snake case (PubType -> pub_type)
+		string(REGEX REPLACE "(.)([A-Z][a-z]+)" "\\1_\\2" pub_type_simple_lower "${pub_type_simple_lower}")
+		string(REGEX REPLACE "([a-z0-9])([A-Z])" "\\1_\\2" pub_type_simple_lower "${pub_type_simple_lower}")
+		string(TOLOWER "${pub_type_simple_lower}" pub_type_simple_lower)
+
+		#message(STATUS "pub: Type: ${pub_type}, Topic: ${pub_topic} (${pub_type_simple_lower})")
+
+
+
+
+		# pub_type to include path (eg px4::msg::VehicleStatus => px4/msg/vehicle_status.hpp)
+		#  temporary create px4/msg/vehicle_status.hpp which simply includes <uORB/topics/vehicle_status.h>
+
+
+
+
+		list(APPEND pub_all_topics ${pub_topic})
+
+		list(APPEND PX4_MSG_TYPE_ID ${pub_type})
+
+		#list(APPEND PX4_MSG_TOPIC_ID ${pub_topic})
+		set(PX4_MSG_TOPIC_ID "${PX4_MSG_TOPIC_ID}\t${pub_topic},\n")
+		#set(PX4_MSG_TOPIC_ID_STRING "${PX4_MSG_TOPIC_ID_STRING}\t"case ORB_ID::${pub_topic}: return \"${pub_topic}\";"\n")
+		set(PX4_MSG_TOPIC_ORB_ID "${PX4_MSG_TOPIC_ORB_ID}\tORB_ID(${pub_topic}),\n")
+
+		list(APPEND PX4_MSG_TOPIC_ID_STRING
+			"case ORB_ID::${pub_topic}: return \"${pub_topic}\";\n"
+		)
+
+		# PX4_MSG_TYPE_ID
+		# PX4_MSG_TOPIC_ID
+
+		# .h  ORB_DECLARE(actuator_controls_0);
+		# .c  ORB_DEFINE(actuator_controls_0, struct actuator_controls_s, 48, __orb_actuator_controls_fields, static_cast<uint8_t>(ORB_ID::actuator_controls_0));
+
+
+		set(PX4_ORB_DECLARE_STR
+			"${PX4_ORB_DECLARE_STR}ORB_DECLARE(${pub_topic});\n")
+
+		# ORB_DEFINE(actuator_armed, struct actuator_armed_s, 16, __orb_actuator_armed_fields, static_cast<uint8_t>(ORB_ID::actuator_armed));
+		set(PX4_ORB_DEFINE_STR
+			"${PX4_ORB_DEFINE_STR}ORB_DEFINE(${pub_topic}, ${pub_type}, px4_embedded::${pub_type_simple_lower}_s::SIZE_NO_PADDING, px4_embedded::${pub_type_simple_lower}_s::FIELDS, static_cast<uint8_t>(ORB_ID::${pub_topic}));\n")
+
+		set(PX4_ORB_HEADER_INCLUDE_STR
+			"${PX4_ORB_HEADER_INCLUDE_STR}#include <uORB/topics/${pub_type_simple_lower}.h>\n")
+
+		math(EXPR PX4_ORB_TOPIC_COUNT "${PX4_ORB_TOPIC_COUNT}+1")
+
+	endforeach()
+	list(REMOVE_DUPLICATES PX4_MSG_TYPE_ID)
+	#list(REMOVE_DUPLICATES PX4_MSG_TOPIC_ID)
+
+	#message(STATUS "PX4_MSG_TYPE_ID: ${PX4_MSG_TYPE_ID}")
+	#message(STATUS "PX4_MSG_TOPIC_ID: ${PX4_MSG_TOPIC_ID}")
+
+	if(PX4_ORB_TOPIC_COUNT GREATER 0)
+		configure_file(uORBTopics.cpp.in ${CMAKE_BINARY_DIR}/uORBTopics.cpp)
+		configure_file(uORBTopics.hpp.in ${CMAKE_BINARY_DIR}/uORBTopics.hpp)
+	endif()
+
+	# .hpp enum ORB_ID
+	# .cpp struct orb_metadat ORB_ID() array
+
+	foreach(f ${msg_files})
+		#message(STATUS "MSG: ${f}")
+	endforeach()
+endif()
+
+if(PX4_ORB_TOPIC_COUNT GREATER 0)
+	add_library(uorb_msgs ${uorb_headers} ${CMAKE_BINARY_DIR}/uORBTopics.cpp ${CMAKE_BINARY_DIR}/uORBTopics.hpp)
+	add_dependencies(uorb_msgs prebuild_targets uorb_headers)
+endif()
+
+if(${PX4_PLATFORM} MATCHES "ros2") # TODO: fix
+	ament_target_dependencies(uorb_msgs rclcpp std_msgs)
+	rosidl_target_interfaces(uorb_msgs ${PROJECT_NAME} "rosidl_typesupport_cpp")
+endif()
+
 #=============================================================================
 # uORB graph generation: add a custom target 'uorb_graph'
 #
@@ -481,17 +597,13 @@ include(doxygen)
 include(metadata)
 include(package)

-# print size
-add_custom_target(size
-	COMMAND size $<TARGET_FILE:px4>
-	DEPENDS px4
-	WORKING_DIRECTORY ${PX4_BINARY_DIR}
-	USES_TERMINAL
-	)
-
 # install python requirements using configured python
 add_custom_target(install_python_requirements
 	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )
+
+if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
+	include(finalize)
+endif()
@@ -17,6 +17,8 @@ menu "Toolchain"
            bool "posix"
        config PLATFORM_QURT
            bool "qurt"
+        config PLATFORM_ROS2
+            bool "ros2"
    endchoice

    config BOARD_PLATFORM
@@ -24,6 +26,7 @@ menu "Toolchain"
        default "nuttx" if PLATFORM_NUTTX
        default "posix" if PLATFORM_POSIX
        default "qurt" if PLATFORM_QURT
+        default "ros2" if PLATFORM_ROS2

    config BOARD_LOCKSTEP
        bool "Force enable lockstep"
@@ -51,13 +54,6 @@ menu "Toolchain"
        string "Architecture"
        default ""

-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -125,11 +121,6 @@ config BOARD_CRYPTO
    help
        Enable PX4 Crypto Support. Select the implementation under drivers

-config BOARD_PROTECTED
-    bool "Memory protection"
-    help
-        Enable memory protection via MPU/MMU
-
 menu "Serial ports"

    config BOARD_SERIAL_URT6
@@ -325,13 +325,12 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -480,7 +479,7 @@ clang-tidy-quiet: px4_sitl_default-clang
 # TODO: Fix cppcheck errors then try --enable=warning,performance,portability,style,unusedFunction or --enable=all
 cppcheck: px4_sitl_default
 	@mkdir -p "$(SRC_DIR)"/build/cppcheck
-	@cppcheck -i"$(SRC_DIR)"/src/examples --enable=performance --std=c++14 --std=c99 --std=posix --project="$(SRC_DIR)"/build/px4_sitl_default/compile_commands.json --xml-version=2 2> "$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml > /dev/null
+	@cppcheck -i"$(SRC_DIR)"/src/examples --enable=performance --std=c++17 --std=c99 --std=posix --project="$(SRC_DIR)"/build/px4_sitl_default/compile_commands.json --xml-version=2 2> "$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml > /dev/null
 	@cppcheck-htmlreport --source-encoding=ascii --file="$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml --report-dir="$(SRC_DIR)"/build/cppcheck --source-dir="$(SRC_DIR)"/src/

 shellcheck_all:
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-## Describe problem solved by this pull request
-A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
 E.g. For this use case I ran into...

-## Describe your solution
+**Describe your solution**
 A clear and concise description of what you have implemented.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Test data / coverage
+**Test data / coverage**
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-## Additional context
+**Additional context**
 Add any other related context or media.
@@ -88,7 +88,7 @@ unset BOARD_RC_SENSORS
 # Check for flow sensor
 if param compare SENS_EN_PX4FLOW 1
 then
-	px4flow start -X &
+	px4flow start -X
 fi

 uavcannode start
@@ -10,7 +10,6 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2

 # Start up Landing Target Estimator module
 landing_target_estimator start
@@ -8,5 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom
@@ -8,5 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom
@@ -67,3 +67,4 @@ param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108

 set MIXER skip
+
@@ -25,8 +25,6 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25
@@ -44,8 +44,6 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

-param set-default FW_USE_NPFG 1
-
 param set-default RWTO_TKOFF 1

 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
@@ -7,15 +7,10 @@

 . ${R}etc/init.d/rc.vtol_defaults

-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

-param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.1515
 param set-default CA_ROTOR0_PY 0.245
 param set-default CA_ROTOR0_KM 0.05
@@ -28,9 +23,6 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 1
@@ -76,6 +68,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -84,5 +77,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 4

@@ -70,6 +68,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.5
@@ -79,5 +78,7 @@ param set-default VT_TYPE 0

 param set-default WV_EN 0

+set MAV_TYPE 20
+
 set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
 set MIXER custom
@@ -7,9 +7,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
-
-param set-default SYS_CTRL_ALLOC 1
+# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,7 +25,9 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -80,6 +80,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
@@ -87,5 +88,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1

+set MAV_TYPE 21
+
 set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
 set MIXER custom
@@ -38,6 +38,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -50,5 +51,7 @@ param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10

+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom
@@ -37,4 +37,6 @@ param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101

+set MAV_TYPE 10
+
 set MIXER_FILE skip
@@ -37,4 +37,6 @@ param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102

+set MAV_TYPE 10
+
 set MIXER_FILE skip
@@ -10,8 +10,6 @@

 . ${R}etc/init.d/rc.rover_defaults

-param set-default MAV_TYPE 10
-
 param set-default GND_L1_DIST 5
 param set-default GND_SP_CTRL_MODE 1
 param set-default GND_SPEED_D 3
@@ -35,4 +33,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0

+set MAV_TYPE 10
+
 set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
@@ -47,4 +47,6 @@ param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

+set MAV_TYPE 11
+
 set MIXER skip
@@ -9,8 +9,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
@@ -26,4 +24,6 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2

+set MAV_TYPE 13
+
 set MIXER hexa_x
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -28,4 +26,6 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2

+set MAV_TYPE 13
+
 set MIXER hexa_x
@@ -7,8 +7,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default MAV_TYPE 13
-
 param set-default SYS_CTRL_ALLOC 1

 param set-default MC_PITCHRATE_P 0.0800
@@ -60,5 +58,7 @@ param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106

+set MAV_TYPE 13
+
 set MIXER skip
 set MIXER_AUX none
@@ -1,4 +1,6 @@

+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -10,7 +10,7 @@ fi

 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
 fi

 publisher_rules_file="orb_publisher.rules"
@@ -21,7 +21,6 @@ ignore_others: false
 EOF

 param set SDLOG_DIRS_MAX 7
-param set SDLOG_PROFILE 3

 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams
@@ -24,6 +24,7 @@ fi

 # initialize script variables
 set IO_PRESENT                  no
+set MAV_TYPE                    none
 set MIXER                       none
 set MIXER_AUX                   none
 set MIXER_FILE                  none
@@ -223,13 +224,6 @@ rc_update start
 manual_control start
 sensors start
 commander start
-
-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for rc.interface,
-#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-#
-. ${R}etc/init.d/rc.vehicle_setup
-
 navigator start

 # Try to start the micrortps_client with UDP transport if module exists
@@ -240,7 +234,7 @@ fi

 if param greater -s MNT_MODE_IN -1
 then
-	gimbal start
+	vmount start
 fi

 if param greater -s TRIG_MODE 0
@@ -259,6 +253,12 @@ then
 	gyro_calibration start
 fi

+# Configure vehicle type specific parameters.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
+. ${R}etc/init.d/rc.vehicle_setup
+
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink

@@ -39,30 +39,8 @@ param set-default FW_RR_P 0.3

 param set-default RWTO_TKOFF 1

-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# @name Steadidrone QU4D
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 4
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.13
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.19
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+set MIXER quad_w
@@ -15,25 +15,6 @@ set MIXER quad_x

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -49,6 +49,7 @@ param set-default MPC_Z_VEL_MAX_DN 1.5

 param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 80

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
@@ -60,42 +61,9 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2

-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-param set-default HIL_ACT_FUNC5 105
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_FUNC7 202
-param set-default HIL_ACT_FUNC8 203
-

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -105,7 +73,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027

-param set-default MAV_TYPE 22
+set MAV_TYPE 22

 set MIXER standard_vtol_hitl

@@ -17,23 +17,6 @@ set PWM_OUT 1234

 param set UAVCAN_ENABLE 0

-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2

@@ -17,26 +17,6 @@ set PWM_OUT 1234

 param set UAVCAN_ENABLE 0

-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

@@ -26,28 +26,8 @@ param set-default VT_FW_DIFTHR_SC 0.3
 param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5

-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.3
-param set-default CA_SV_CS0_TRQ_Y 0.3
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.3
-param set-default CA_SV_CS1_TRQ_Y -0.3
-param set-default CA_SV_CS1_TYPE 6
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC5 202
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_REV 32
-
 param set-default MAV_TYPE 19
-
+set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo_sat

 set PWM_OUT 1234
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name Steadidrone MAVRIK
+#
+# @type Octo Coax Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 motor 5
+# @output MAIN6 motor 6
+# @output MAIN7 motor 7
+# @output MAIN8 motor 8
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default MC_PITCH_P 4
+param set-default MC_PITCHRATE_P 0.24
+param set-default MC_PITCHRATE_I 0.09
+param set-default MC_PITCHRATE_D 0.013
+param set-default MC_PITCHRATE_MAX 180
+
+param set-default MC_ROLL_P 4
+param set-default MC_ROLLRATE_P 0.16
+param set-default MC_ROLLRATE_I 0.07
+param set-default MC_ROLLRATE_D 0.009
+param set-default MC_ROLLRATE_MAX 180
+
+param set-default MC_YAW_P 3
+
+param set-default MPC_HOLD_MAX_XY 0.25
+param set-default MPC_THR_MIN 0.15
+param set-default MPC_Z_VEL_MAX_DN 2
+
+param set-default BAT1_N_CELLS 4
+
+set MIXER octo_cox_w
+
+set PWM_OUT 12345678
@@ -24,38 +24,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4

 param set-default PWM_AUX_DIS5 950

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
-
-param set-default MAV_TYPE 22
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -19,6 +19,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

+
 param set-default MAV_TYPE 19

 param set-default MC_ROLL_P 6
@@ -37,6 +38,7 @@ param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_ID 12
 param set-default VT_TYPE 0
+set MAV_TYPE 19

 set MIXER vtol_tailsitter_duo

@@ -23,7 +23,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21

 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
@@ -46,6 +45,7 @@ param set-default VT_TILT_TRANS 0.5
 param set-default VT_TILT_FW 0.9
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21

 set MIXER firefly6
 set MIXER_AUX firefly6
@@ -13,33 +13,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y 0.5
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6

 param set-default PWM_MAIN_MAX 2000

 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
+set MAV_TYPE 20

 set MIXER quad_x_vtol

@@ -7,8 +7,8 @@
 #
 # @output MAIN1 motor 1
 # @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
+# @output MAIN3 motor 4
+# @output MAIN4 motor 5
 # @output MAIN5 elevon left
 # @output MAIN6 elevon right
 # @output MAIN7 canard surface
@@ -22,13 +22,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 20
-
 param set-default PWM_MAIN_MAX 2000

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0

+set MAV_TYPE 20
+
 set MIXER quad_+_vtol

 set PWM_OUT 1234
@@ -52,6 +52,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -41,6 +41,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_delta
@@ -33,6 +33,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAVVT
@@ -46,6 +46,7 @@ param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2
+set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -77,6 +77,8 @@ param set-default VT_TRANS_MIN_TM 5
 param set-default VT_TRANS_TIMEOUT    30
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT

@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# @name CruiseAder Claire
+#
+# @type VTOL Tiltrotor
+# @class VTOL
+#
+# @maintainer Samay Siga <samay_s@icloud.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default PWM_AUX_DISARM 1000
+param set-default PWM_AUX_MAX 2000
+param set-default PWM_AUX_MIN 1000
+param set-default PWM_AUX_RATE 50
+
+param set-default PWM_MAIN_MAX 2000
+
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 13
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_TILT_FW 0.9
+param set-default VT_TILT_MC 0.08
+param set-default VT_TILT_TRANS 0.5
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 1
+set MAV_TYPE 21
+
+set MIXER claire
+set MIXER_AUX claire
+
+set PWM_OUT 1234
@@ -22,8 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
-
 param set-default CBRK_AIRSPD_CHK 162128

 param set-default FW_ARSP_MODE 1
@@ -66,12 +64,8 @@ param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21

 set MIXER vtol_convergence

-if ! ver hwcmp MATEK_H743
-then
-	set PWM_OUT 1234
-else
-	set PWM_OUT 3456
-fi	
+set PWM_OUT 1234
@@ -22,8 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 22
-
 param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025
@@ -131,10 +129,12 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
+param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

 param set-default COM_RC_OVERRIDE 0
+set MAV_TYPE 22

 set MIXER deltaquad
 set MIXER_AUX pass
@@ -23,8 +23,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 22
-
 param set-default BAT1_N_CELLS 6

 param set-default FW_AIRSPD_MAX 30
@@ -96,6 +94,8 @@ param set-default VT_PSHER_RMP_DT 2
 param set-default VT_TRANS_MIN_TM 4
 param set-default VT_TYPE 2

+set MAV_TYPE 22
+
 set MIXER babyshark
 set MIXER_AUX pass

@@ -27,37 +27,11 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 21
-
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 24
-
-param set-default CA_AIRFRAME 3
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_TILT 2
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR3_TILT 4
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_TL_COUNT 4
+set MAV_TYPE 21

 set MIXER quad_x
 set MIXER_AUX vtol_TTTTAAER
@@ -31,6 +31,7 @@ param set-default PWM_AUX_DIS5 950
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678
 param set-default VT_FW_MOT_OFFID 12345678
+set MAV_TYPE 22

 set MIXER octo_cox
 set MIXER_AUX vtol_AAERT
@@ -19,26 +19,12 @@

 . ${R}etc/init.d/rc.vtol_defaults

-param set-default MAV_TYPE 19
-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0

-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y 0.5
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo

 set PWM_OUT 1234
@@ -18,7 +18,4 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_TRICOPTER 15
-param set-default MAV_TYPE 15
-
 set MIXER tri_y_yaw+
@@ -18,7 +18,4 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_TRICOPTER 15
-param set-default MAV_TYPE 15
-
 set MIXER tri_y_yaw-
@@ -17,9 +17,7 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-
-# MAV_TYPE_COAXIAL 3
-param set-default MAV_TYPE 3
+set MIXER coax

 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
@@ -38,9 +36,6 @@ param set-default PWM_MAIN_RATE 400

 param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10
-
-set MIXER coax
-
 # This is the gimbal pass mixer
 set MIXER_AUX pass

@@ -20,7 +20,7 @@
 . ${R}etc/init.d/rc.mc_defaults

 # Configure as helicopter (number 4 defined in commander_helper.cpp)
-param set-default MAV_TYPE 4
+set MAV_TYPE 4

 set MIXER blade130

@@ -41,6 +41,5 @@ param set-default FW_R_LIM 40
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
-
 set MIXER TF-G2
 set MIXER_AUX pass
@@ -24,5 +24,8 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600

+set MAV_TYPE 8
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER IO_pass
 set MIXER_AUX pass
@@ -23,18 +23,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50

@@ -26,7 +26,7 @@
 # @board px4_fmu-v2 exclude
 #

-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc

 param set-default NAV_ACC_RAD 2

@@ -39,7 +39,6 @@ param set-default PWM_MAIN_RATE 400

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
-
 set MIXER dodeca_top_cox
 set MIXER_AUX dodeca_bottom_cox

@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name IO Camflyer
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 15
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.04
+
+param set-default PWM_MAIN_DISARM 1000
+
+
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse while disarmed
+set PWM_OUT 4
@@ -41,6 +41,9 @@ param set-default FW_RR_P 0.04

 param set-default PWM_MAIN_DISARM 1000

+# Configure this as plane.
+set MAV_TYPE 1
+
 # Set mixer.
 set MIXER fw_generic_wing

@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# @name FX-79 Buffalo Flying Wing
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 right aileron
+# @output MAIN2 left aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 30
+param set-default FW_AIRSPD_MIN 13
+
+param set-default NAV_LOITER_RAD 150
+
+set MIXER fw_generic_wing
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Viper
+#
+# @type Flying Wing
+# @class Plane
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER Viper
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name Modified Parrot Disco
+#
+# @url
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+####################################
+# Airspeed
+####################################
+param set-default FW_AIRSPD_MAX  27 # = 52 knots
+
+####################################
+# Pitch
+####################################
+
+# Pitch rate feed forward (def = 0.5 %/rad/sec)
+param set-default FW_PR_FF 0.35
+
+####################################
+# Roll
+####################################
+
+# Basic limits (def = 50 deg)
+param set-default FW_R_LIM 40
+
+# Roll rate upper limit (def = 70 deg/s)
+param set-default FW_R_RMAX 50
+
+param set-default PWM_MAIN_DISARM 1000
+
+set MIXER fw_generic_wing.main.mix
+
+# Provide ESC a constant 1000 us pulse
+set PWM_OUT 4
@@ -21,16 +21,3 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# @name DJI F330 w/ DJI ESCs
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+
+
+# DJI ESCs do not support calibration and need a higher min
+param set-default PWM_MAIN_MIN 1230
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# @name DJI F450 w/ DJI ESCs
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_YAWRATE_P 0.3
+
+# DJI ESCs do not support calibration and need a higher min
+param set-default PWM_MAIN_MIN 1230
@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# @name S500 with control allocation
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Silvan Fuhrer
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+set MIXER skip
+set MIXER_AUX none
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.177
+param set-default CA_ROTOR0_PY 0.177
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.177
+param set-default CA_ROTOR1_PY -0.177
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.177
+param set-default CA_ROTOR2_PY -0.177
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.177
+param set-default CA_ROTOR3_PY 0.177
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
@@ -24,6 +24,8 @@

 set MIXER quad_s250aq

+set MAV_TYPE 2
+
 param set-default ATT_BIAS_MAX 0

 param set-default CBRK_IO_SAFETY 22027
@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# @name DJI Matrice 100
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer James Goppert <james.goppert@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 6
+
+param set-default MC_ROLLRATE_P 0.05
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.001
+param set-default MC_PITCHRATE_P 0.05
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.001
+
+param set-default MC_YAWRATE_I 0
+
+param set-default PWM_MAIN_MIN 1200
@@ -46,7 +46,7 @@ param set-default COM_RC_LOSS_T 3


 # ekf2
-param set-default EKF2_AID_MASK 33
+param set-default EKF2_AID_MASK 35
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0

@@ -147,7 +147,7 @@ param set-default MPC_Z_VEL_P 0.27


 # gimbal configuration
-param set-default MNT_MODE_IN 0
+param set-default MNT_MODE_IN 1
 param set-default MNT_MODE_OUT 1
 param set-default MNT_MAN_PITCH 2
 param set-default MNT_RC_IN_MODE 1
@@ -164,8 +164,6 @@ param set-default RC_MAP_AUX2       5
 param set-default RC_MAP_AUX3       10
 param set-default RC_MAP_AUX4       8
 param set-default RC_MAP_FLTMODE    6
-param set-default RC_MAP_RETURN_SW  7
-
 param set-default RC1_TRIM          1000


@@ -21,7 +21,10 @@
 # @board cuav_x7pro exclude
 #

-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
+set MIXER quad_x
+set PWM_OUT 1234
+

 # Attitude & rate gains
 param set-default MC_ROLLRATE_D 0.0013
@@ -21,7 +21,10 @@
 # @maintainer Hyon Lim <lim@uvify.com>
 #

-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
+set MIXER quad_x
+set PWM_OUT 1234
+

 # Attitude & rate gains
 param set-default MC_ROLLRATE_D 0.0013
@@ -24,6 +24,10 @@

 . ${R}etc/init.d/rc.mc_defaults

+
+# Configure this as Quadrotor
+# set MAV_TYPE 14
+
 # Set mixer
 set MIXER tilt_quad
 set MIXER_AUX tilt_quad
@@ -48,6 +48,8 @@ param set-default NAV_ACC_RAD 0.5
 param set-default PWM_MAIN_DISARM 1500
 param set-default PWM_MAIN_MAX 2000
 param set-default PWM_MAIN_MIN 1000
+# Configure this as rover
+set MAV_TYPE 10

 # Set mixer
 set MIXER rover_generic
@@ -76,6 +76,9 @@ param set-default RBCLW_SER_CFG 104
 # Start this driver after setting parameters, because the driver uses some of those parameters.
 # roboclaw start /dev/ttyS3

+# Configure this as rover
+set MAV_TYPE 10
+
 # Set mixer
 set MIXER generic_diff_rover

@@ -65,6 +65,9 @@ param set-default PWM_MAIN_MIN4 970
 # Enable Airspeed check circuit breaker because Rovers will have no airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+# Configure this as rover
+set MAV_TYPE 10
+
 # Set mixer
 set MIXER rover_diff_and_servo

@@ -16,4 +16,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER uuv_x
@@ -16,4 +16,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER uuv_x
@@ -23,26 +23,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
-
-param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 0.5
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -0.5
-param set-default CA_ROTOR2_PX 0.43
-param set-default CA_ROTOR2_PY -0.25
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.43
-param set-default CA_ROTOR3_PY 0.25
-param set-default CA_ROTOR4_PX 0.43
-param set-default CA_ROTOR4_PY 0.25
-param set-default CA_ROTOR5_PX -0.43
-param set-default CA_ROTOR5_PY -0.25
-param set-default CA_ROTOR5_KM -0.05
-
 set MIXER hexa_x

 # Need to set all 8 channels
@@ -27,8 +27,9 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
+set MIXER hexa_x
+set PWM_OUT 12345678
+

 ###############################################
 # Attitude & rate gains
@@ -119,7 +120,3 @@ param set-default MAV_1_MODE 2
 param set-default MAV_1_FORWARD 1
 param set-default MAV_1_RATE 800000
 param set-default SER_TEL2_BAUD 921600
-
-
-set MIXER hexa_x
-set PWM_OUT 12345678
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# @name Hex X with control allocation
+#
+# @type Hexarotor x
+# @class Copter
+#
+# @maintainer Silvan Fuhrer
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 6
+
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 0.275
+param set-default CA_ROTOR0_KM -0.05
+
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -0.275
+param set-default CA_ROTOR1_KM 0.05
+
+param set-default CA_ROTOR2_PX 0.238
+param set-default CA_ROTOR2_PY -0.1375
+param set-default CA_ROTOR2_KM -0.05
+
+param set-default CA_ROTOR3_PX -0.238
+param set-default CA_ROTOR3_PY 0.1375
+param set-default CA_ROTOR3_KM 0.05
+
+param set-default CA_ROTOR4_PX 0.238
+param set-default CA_ROTOR4_PY 0.1375
+param set-default CA_ROTOR4_KM 0.05
+
+param set-default CA_ROTOR5_PX -0.238
+param set-default CA_ROTOR5_PY -0.1375
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+
+set MIXER skip
+set MIXER_AUX none
@@ -23,26 +23,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
-
-param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX -0.5
-param set-default CA_ROTOR1_PY 0.0
-param set-default CA_ROTOR2_PX -0.25
-param set-default CA_ROTOR2_PY -0.43
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX 0.25
-param set-default CA_ROTOR3_PY 0.43
-param set-default CA_ROTOR4_PX 0.25
-param set-default CA_ROTOR4_PY -0.43
-param set-default CA_ROTOR5_PX -0.25
-param set-default CA_ROTOR5_PY 0.43
-param set-default CA_ROTOR5_KM -0.05
-
 set MIXER hexa_+

 # Need to set all 8 channels
@@ -25,31 +25,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_OCTOROTOR 14
-param set-default MAV_TYPE 14
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PX 0.46
-param set-default CA_ROTOR0_PY 0.19
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PX -0.46
-param set-default CA_ROTOR1_PY -0.19
-param set-default CA_ROTOR2_PX 0.19
-param set-default CA_ROTOR2_PY 0.46
-param set-default CA_ROTOR3_PX -0.46
-param set-default CA_ROTOR3_PY 0.19
-param set-default CA_ROTOR4_PX 0.46
-param set-default CA_ROTOR4_PY -0.19
-param set-default CA_ROTOR5_PX -0.19
-param set-default CA_ROTOR5_PY -0.46
-param set-default CA_ROTOR6_KM -0.05
-param set-default CA_ROTOR6_PX 0.19
-param set-default CA_ROTOR6_PY -0.46
-param set-default CA_ROTOR7_KM -0.05
-param set-default CA_ROTOR7_PX -0.19
-param set-default CA_ROTOR7_PY 0.46
-
 set MIXER octo_x

 set PWM_OUT 12345678
@@ -25,9 +25,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-# MAV_TYPE_OCTOROTOR 14
-param set-default MAV_TYPE 14
-
 set MIXER octo_+

 set PWM_OUT 12345678
@@ -52,20 +52,27 @@ px4_add_romfs_files(

 	# [3000, 3999] Flying wing"
 	3000_generic_wing
+	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
+	3034_fx79
+	3035_viper
 	3036_pigeon
+	3037_parrot_disco_mod
 	3100_tbs_caipirinha

 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
+	4010_dji_f330
+	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
 	4017_nxp_hovergames
+	4018_s500_ctrlalloc
 	4019_x500_v2
 	4030_3dr_solo
 	4031_3dr_quad
@@ -75,6 +82,7 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
+	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -92,6 +100,7 @@ px4_add_romfs_files(
 	# [6000, 6999] Hexarotor x"
 	6001_hexa_x
 	6002_draco_r
+	6003_hexa_x_ctrlalloc

 	# [7000, 7999] Hexarotor +"
 	7001_hexa_+
@@ -105,6 +114,7 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
+	10017_steadidrone_qu4d
 	10018_tbs_endurance

 	# [11000, 11999] Hexa Cox
@@ -112,6 +122,7 @@ px4_add_romfs_files(

 	# [12000, 12999] Octo Cox
 	12001_octo_cox
+	12002_steadidrone_mavrik

 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -124,6 +135,7 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
+	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE airship

-# MAV_TYPE_AIRSHIP 7
-param set-default MAV_TYPE 7
-
 #
 # This is the gimbal pass mixer.
 #
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE fw

-# MAV_TYPE_FREE_BALLOON 8
-param set-default MAV_TYPE 8
-
 #
 # Default parameters for balloon UAVs.
 #
@@ -7,9 +7,6 @@

 set VEHICLE_TYPE rover

-# MAV_TYPE_SURFACE_BOAT 11
-param set-default MAV_TYPE 11
-
 #
 # Default parameters for UGVs.
 #
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Daniel Agar	61778511ea	lib/matrix: inline common Vector3f operators	2022-01-21 12:53:26 -05:00
Daniel Agar	56de0e27d8	PX4 ROS2 msg conformity and explicit topics - .msg files are PascalCase - topics are still either per msg or explicitly listed in TOPICS - compatible structs are still generated (eg struct msg_s), but ROS2 style px4::msg::Msg is also available	2022-01-21 09:32:30 -05:00