init.d-posix: make all simulation airframes simulator specific

.ci/Jenkinsfile-compile

@@ -42,8 +42,6 @@ pipeline {
                      "ark_can-gps_default",
                      "ark_can-rtk-gps_canbootloader",
                      "ark_can-rtk-gps_default",
-                     "ark_fmu-v6x_bootloader",
-                     "ark_fmu-v6x_default",
                      "atl_mantis-edu_default",
                      "av_x-v1_default",
                      "bitcraze_crazyflie_default",
@@ -69,18 +67,23 @@ pipeline {
                      "matek_h743-slim_default",
                      "matek_h743_default",
                      "modalai_fc-v1_default",
+                     "modalai_fc-v1_rtps",
                      "modalai_fc-v2_default",
-                     "modalai_voxl2-io_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
                      "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
                      "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
                      "mro_pixracerpro_default",
+                     "mro_pixracerpro_rtps",
                      "mro_x21-777_default",
                      "mro_x21_default",
                      "nxp_fmuk66-e_default",
+                     "nxp_fmuk66-e_rtps",
                      "nxp_fmuk66-e_socketcan",
                      "nxp_fmuk66-v3_default",
+                     "nxp_fmuk66-v3_rtps",
                      "nxp_fmuk66-v3_socketcan",
                      "nxp_fmurt1062-v1_default",
                      "nxp_ucans32k146_canbootloader",
@@ -98,6 +101,7 @@ pipeline {
                      "px4_fmu-v5_debug",
                      "px4_fmu-v5_default",
                      "px4_fmu-v5_lto",
+                     "px4_fmu-v5_rtps",
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
                      "px4_fmu-v5x_default",

.ci/Jenkinsfile-hardware

@@ -61,13 +61,9 @@ pipeline {
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -136,12 +132,8 @@ pipeline {
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -160,6 +152,76 @@ pipeline {
           }
         }
 
+        stage("px4_fmu-v3_test") {
+          stages {
+            stage("build px4_fmu-v3_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2021-09-08'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v3_test'
+                sh 'make px4_fmu-v3_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v3'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v3_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
         stage("px4_fmu-v4_test") {
           stages {
             stage("build px4_fmu-v4_test") {
@@ -209,12 +271,8 @@ pipeline {
                     resetParameters()
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -282,13 +340,9 @@ pipeline {
                     resetParameters()
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -377,7 +431,6 @@ pipeline {
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                     checkStatus()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                   }
@@ -460,7 +513,6 @@ pipeline {
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                     checkStatus()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                   }
@@ -530,13 +582,9 @@ pipeline {
                     resetParameters()
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -605,12 +653,8 @@ pipeline {
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -684,8 +728,14 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
 
+  // run logger
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
   // status commands
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
@@ -715,12 +765,14 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output0"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output1" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
@@ -729,6 +781,8 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+  // stop logger
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }
 
 void resetParameters() {
@@ -767,13 +821,13 @@ void runTests() {
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
@@ -803,6 +857,7 @@ void printTopics() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_3" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
@@ -864,10 +919,12 @@ void printTopics() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener test_motor" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
@@ -884,7 +941,7 @@ void printTopics() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status_flags" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
 }

.gitattributes

@@ -19,8 +19,9 @@
 *.jar    binary
 *.xml    text eol=lf
 
-# PX4 msgs, etc
+# PX4 mixers, msgs, etc
 *.bin    binary
+*.mix    text eol=lf
 *.msg    text eol=lf
 *.config text eol=lf
 *.sdf    text eol=lf

.github/ISSUE_TEMPLATE/2_Feature_request.md

@@ -5,7 +5,7 @@ labels: feature-request
 
 ---
 
-For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Discord (you can find an invite link on this project README).
+For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
 
 ## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,29 +1,17 @@
-<!--
+Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
 
-Thank you for your contribution!
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+E.g. For this use case I ran into...
 
-Get early feedback through
-- Dronecode Discord: https://discord.gg/dronecode
-- PX4 Discuss: http://discuss.px4.io/
-- opening a draft pr and sharing the link
+## Describe your solution
+A clear and concise description of what you have implemented.
 
--->
+## Describe possible alternatives
+A clear and concise description of alternative solutions or features you've considered.
 
-### Solved Problem
-When ... I found that ...
+## Test data / coverage
+How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
 
-Fixes #{Github issue ID}
-
-### Solution
-- Add ... for ...
-- Refactor ...
-
-### Alternatives
-We could also ...
-
-### Test coverage
-- Unit/integration test: ...
-- Simulation/hardware testing logs: https://review.px4.io/
-
-### Context
-Related links, screenshot before/after, video
+## Additional context
+Add any other related context or media.

.github/workflows/checks.yml

@@ -3,7 +3,7 @@ name: Checks
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'
@@ -23,6 +23,7 @@ jobs:
           "shellcheck_all",
           "NO_NINJA_BUILD=1 px4_fmu-v5_default",
           "NO_NINJA_BUILD=1 px4_sitl_default",
+          "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
           "airframe_metadata",
           "module_documentation",
           "parameters_metadata",

.github/workflows/clang-tidy.yml

@@ -3,7 +3,7 @@ name: Clang Tidy
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/compile_linux.yml

@@ -3,7 +3,7 @@ name: Linux Targets
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/compile_linux_arm64.yml

@@ -3,7 +3,7 @@ name: Linux ARM64 Targets
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/compile_macos.yml

@@ -3,7 +3,7 @@ name: MacOS build
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/compile_nuttx.yml

@@ -3,7 +3,7 @@ name: Nuttx Targets
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'
@@ -21,7 +21,6 @@ jobs:
           ark_can-gps,
           ark_can-rtk-gps,
           ark_cannode,
-          ark_fmu-v6x,
           atl_mantis-edu,
           av_x-v1,
           bitcraze_crazyflie,

.github/workflows/deploy_all.yml

@@ -3,7 +3,7 @@ name: Deploy metadata for all targets
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
     - 'release/*'
     - 'pr-metadata-test'
 

.github/workflows/failsafe_sim.yml

@@ -1,44 +0,0 @@
-name: Failsafe Simulator Build
-
-on:
-  push:
-    branches:
-    - 'main'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    defaults:
-      run:
-        shell: bash
-    strategy:
-      fail-fast: false
-      matrix:
-        check: [
-          "failsafe_web",
-        ]
-    container:
-      image: px4io/px4-dev-nuttx-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: install emscripten
-      run: |
-        git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
-        cd _emscripten_sdk
-        ./emsdk install latest
-        ./emsdk activate latest
-    - name: ${{matrix.check}}
-      run: |
-        . ./_emscripten_sdk/emsdk_env.sh
-        make ${{matrix.check}}

.github/workflows/mavros_mission_tests.yml

@@ -3,7 +3,7 @@ name: MAVROS Mission Tests
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/mavros_offboard_tests.yml

@@ -3,7 +3,7 @@ name: MAVROS Offboard Tests
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/metadata.yml

@@ -3,7 +3,7 @@ name: Metadata
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
     - 'release/*'
     - 'pr-metadata-test'
 
@@ -116,7 +116,7 @@ jobs:
         ls -ls *
       # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
 
-  ROS2_msgs:
+  micrortps_agent:
     runs-on: ubuntu-latest
     container: px4io/px4-dev-base-focal:2021-09-08
     steps:
@@ -124,8 +124,34 @@ jobs:
       with:
         token: ${{ secrets.ACCESS_TOKEN }}
 
-    - name: PX4 ROS2 msgs
+    - name: microRTPS agent
+      run: |
+        make px4_sitl_rtps
+        git clone https://github.com/PX4/micrortps_agent.git
+        cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent
+
+  ROS_msgs:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS msgs
       run: |
         git clone https://github.com/PX4/px4_msgs.git
-        rm px4_msgs/msg/*.msg
-        cp msg/*.msg px4_msgs/msg/
+        python3 msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/
+
+  ROS2_bridge:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS2 bridge
+      run: |
+        git clone https://github.com/PX4/px4_ros_com.git
+        ./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml

.github/workflows/python_checks.yml

@@ -3,7 +3,7 @@ name: Python CI Checks
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'

.github/workflows/sitl_tests.yml

@@ -3,7 +3,7 @@ name: SITL Tests
 on:
   push:
     branches:
-    - 'main'
+    - 'master'
   pull_request:
     branches:
     - '*'
@@ -16,7 +16,7 @@ jobs:
       matrix:
         config:
           - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
-          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
+          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
           - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
           - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
 
@@ -81,7 +81,7 @@ jobs:
       env:
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
         DONT_RUN: 1
-      run: make px4_sitl_default gazebo mavsdk_tests
+      run: make px4_sitl_default sitl_gazebo mavsdk_tests
     - name: ccache post-run mavsdk_tests
       run: ccache -s
 

.gitignore

@@ -47,8 +47,6 @@ GTAGS
 *.files
 *.includes
 
-Tools/jlink-nuttx.so
-
 # CLion ignores
 .idea
 cmake-build-*/
@@ -95,6 +93,7 @@ rules.ninja
 /googletest-*/
 /logs
 /mavsdk_tests
+/test_mixer_multirotor
 /unit-*
 /uORB/
 DartConfiguration.tcl

.gitmodules

@@ -9,23 +9,27 @@
 [submodule "Tools/simulation/jmavsim/jMAVSim"]
 	path = Tools/simulation/jmavsim/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
-	branch = main
+	branch = master
 [submodule "Tools/simulation/gazebo/sitl_gazebo"]
 	path = Tools/simulation/gazebo/sitl_gazebo
 	url = https://github.com/PX4/PX4-SITL_gazebo.git
-	branch = main
+	branch = master
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
-	branch = main
+	branch = master
+[submodule "src/modules/micrortps_bridge/micro-CDR"]
+	path = src/modules/micrortps_bridge/micro-CDR
+	url = https://github.com/PX4/Micro-CDR.git
+	branch = master
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.3.0+
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.3.0+
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/simulation/flightgear/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
@@ -49,7 +53,6 @@
 [submodule "src/lib/events/libevents"]
 	path = src/lib/events/libevents
 	url = https://github.com/mavlink/libevents.git
-	branch = main
 [submodule "src/lib/crypto/libtomcrypt"]
 	path = src/lib/crypto/libtomcrypt
 	url = https://github.com/PX4/libtomcrypt.git
@@ -60,5 +63,4 @@
 	branch = px4
 [submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
 	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/PX4/Micro-XRCE-DDS-Client.git
-	branch = px4
+	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git

.travis.yml

@@ -11,7 +11,7 @@ matrix:
       dist: xenial
       # In order to stay under the coverity rate limit, we only run this weekly
       # and not on push which is configured in travis-ci settings.
-      if: branch = main
+      if: branch = master
 
 before_install:
     - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-

.vscode/cmake-variants.yaml

@@ -6,11 +6,16 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
-    px4_sitl_nolockstep:
-      short: px4_sitl_nolockstep
+    px4_sitl_ign:
+      short: px4_sitl_ign
       buildType: RelWithDebInfo
       settings:
-        CONFIG: px4_sitl_nolockstep
+        CONFIG: px4_sitl_ign
+    px4_sitl_rtps:
+      short: px4_sitl_rtps
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_rtps
     px4_sitl_asan:
       short: px4_sitl (AddressSanitizer)
       buildType: AddressSanitizer
@@ -131,16 +136,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_cannode_canbootloader
-    ark_fmu-v6x_bootloader:
-      short: ark_fmu-v6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_bootloader
-    ark_fmu-v6x_default:
-      short: ark_fmu-v6x_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_default
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel
@@ -236,11 +231,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: modalai_fc-v2_default
-    modalai_voxl2-io_default:
-      short: modalai_voxl2-io
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_voxl2-io_default
     mro_ctrl-zero-f7_default:
       short: mro_ctrl-zero-f7
       buildType: MinSizeRel

.vscode/settings.json

@@ -133,5 +133,6 @@
         "workbench.settings.enableNaturalLanguageSearch": false,
         "yaml.schemas": {
                 "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
-        }
+        },
+        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
 }

.vscode/tasks.json

@@ -49,62 +49,17 @@
                 "group": "test"
             }
         },
-        {
-            "label": "jmavsim build",
-            "type": "shell",
-            "command": "ant create_run_jar copy_res",
-            "options": {
-                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
-            },
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": []
-        },
-        {
-            "label": "jmavsim",
-            "type": "shell",
-            "dependsOn": "jmavsim build",
-            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
-            "options": {
-                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
-                "env": {
-                    "PX4_SIM_SPEED_FACTOR": "1"
-                }
-            },
-            "isBackground": true,
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": []
-        },
         {
             "label": "jmavsim kill",
             "type": "shell",
-            "command": "kill $(ps aux | grep jmavsim | grep -v 'grep' | awk '{print $2}') || true",
+            "command": "kill $(ps aux | grep jmavsim | grep -v 'grep' | awk '{print $2}')",
             "presentation": {
-                "echo": true,
+                "echo": false,
                 "reveal": "never",
-                "revealProblems": "onProblem",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [],
             "dependsOn":["px4_sitl_cleanup"]
@@ -116,17 +71,15 @@
             "options": {
                 "cwd": "${workspaceFolder}"
             },
-            "presentation": {
+            "problemMatcher": [],
+            "presentation":{
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "always",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
                 "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
+            }
         },
         {
             "label": "gazebo start",
@@ -140,17 +93,15 @@
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/empty.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/${input:gazeboWorld}.world",
             "isBackground": true,
             "presentation": {
                 "echo": true,
                 "reveal": "never",
-                "revealProblems": "onProblem",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [
                 {
@@ -182,8 +133,46 @@
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/${input:gazeboModel}/${input:gazeboModel}.sdf --model-name=${input:gazeboModel} -x 1.01 -y 0.98 -z 0.83",
             "isBackground": false,
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "focus": false,
+                "panel": "shared",
+                "showReuseMessage": false,
+                "clear": false
+            },
+            "problemMatcher": [
+                {
+                    "pattern": [
+                        {
+                            "regexp": ".",
+                            "file": 1,
+                            "location": 2,
+                            "message": 3
+                        }
+                    ],
+                    "background": {
+                        "activeOnStart": true,
+                        "beginsPattern": ".",
+                        "endsPattern": ".",
+                    }
+                }
+            ]
+        },
+        {
+            "label": "ign gazebo",
+            "type": "shell",
+            "options": {
+                "cwd": "${workspaceFolder}",
+                "env": {
+                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/ignition/models",
+                    "PX4_SIM_SPEED_FACTOR": "1"
+                }
+            },
+            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/ignition/worlds/${input:ignWorld}.sdf",
+            "isBackground": true,
             "presentation": {
                 "echo": true,
                 "reveal": "never",
@@ -212,30 +201,6 @@
                 }
             ]
         },
-        {
-            "label": "ign gazebo",
-            "type": "shell",
-            "options": {
-                "cwd": "${workspaceFolder}",
-                "env": {
-                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/gz/models",
-                }
-            },
-            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/gz/worlds/${input:gzWorld}.sdf",
-            "isBackground": true,
-            "presentation": {
-                "echo": true,
-                "reveal": "always",
-                "revealProblems": "onProblem",
-                "focus": true,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": false
-            },
-            "problemMatcher": [],
-            "dependsOn":["ign gazebo kill"]
-        },
         {
             "label": "gazebo kill",
             "type": "shell",
@@ -256,7 +221,7 @@
         {
             "label": "ign gazebo kill",
             "type": "shell",
-            "command": "pkill -9 -f 'ign gazebo' || true",
+            "command": "pkill -9 -f ign || true",
             "presentation": {
                 "echo": true,
                 "reveal": "never",
@@ -342,12 +307,46 @@
     "inputs": [
         {
             "type": "pickString",
-            "id": "gzWorld",
-            "description": "gz world",
+            "id": "ignWorld",
+            "description": "Ignition world",
             "options": [
                 "default"
             ],
             "default": "default"
+        },
+        {
+            "type": "pickString",
+            "id": "gazeboModel",
+            "description": "gazebo model",
+            "options": [
+              "iris",
+              "typhoon_h480",
+              "plane",
+              "plane_catapult",
+              "plane_lidar",
+              "standard_vtol",
+              "tailsitter",
+              "tiltrotor",
+              "r1_rover",
+              "boat"
+            ],
+            "default": "iris"
+        },
+        {
+            "type": "pickString",
+            "id": "gazeboWorld",
+            "description": "gazebo world",
+            "options": [
+                "baylands",
+                "empty",
+                "ksql_airport",
+                "mcmillan_airfield",
+                "sonoma_raceway",
+                "warehouse",
+                "windy",
+                "yosemite"
+            ],
+            "default": "empty"
         }
     ]
 }

CMakeLists.txt

@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2019 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -143,17 +143,25 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
 # configuration
 #
 
+set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+
 include(px4_add_module)
 set(config_module_list)
 set(config_kernel_list)
 
 # Find Python
-find_package(PythonInterp 3)
-# We have a custom error message to tell users how to install python3.
-if(NOT PYTHONINTERP_FOUND)
-	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-		"    macOS: brew install python")
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
 endif()
 
 option(PYTHON_COVERAGE "Python code coverage" OFF)
@@ -199,11 +207,6 @@ if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
 	include(init)
 endif()
 
-#=============================================================================
-# project definition
-#
-project(px4 CXX C ASM)
-
 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
 if(NOT CMAKE_BUILD_TYPE)
 	if(${PX4_PLATFORM} STREQUAL "nuttx")
@@ -232,6 +235,11 @@ endif()
 set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage;AddressSanitizer;UndefinedBehaviorSanitizer")
 message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 
+#=============================================================================
+# project definition
+#
+project(px4 CXX C ASM)
+
 # Check if LTO option and check if toolchain supports it
 if(LTO)
     include(CheckIPOSupported)
@@ -248,9 +256,15 @@ set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
+# For the catkin build process, unset build of dynamically-linked binaries
+# and do not change CMAKE_RUNTIME_OUTPUT_DIRECTORY
+if (NOT CATKIN_DEVEL_PREFIX)
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
+else()
+	SET(BUILD_SHARED_LIBS OFF)
+endif()
 
 #=============================================================================
 
@@ -282,7 +296,10 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 	set(CMAKE_ENABLE_EXPORTS ON)
 
-	include(coverage)
+	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
+		include(coverage)
+	endif()
+
 	include(sanitizers)
 
 	# Define GNU standard installation directories
@@ -295,6 +312,21 @@ endif()
 
 include(ccache)
 
+#=============================================================================
+# find programs and packages
+#
+
+# see if catkin was invoked to build this
+if (CATKIN_DEVEL_PREFIX)
+	message(STATUS "catkin ENABLED")
+	find_package(catkin REQUIRED)
+	if (catkin_FOUND)
+		catkin_package()
+	else()
+		message(FATAL_ERROR "catkin not found")
+	endif()
+endif()
+
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -385,6 +417,7 @@ if(BUILD_TESTING)
 			DEPENDS
 				px4
 				examples__dyn_hello
+				test_mixer_multirotor
 			USES_TERMINAL
 			COMMENT "Running tests"
 			WORKING_DIRECTORY ${PX4_BINARY_DIR})
@@ -421,10 +454,10 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
 
 if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-	target_link_libraries(parameters_interface INTERFACE usr_parameters)
-	target_link_libraries(kernel_parameters_interface INTERFACE parameters)
+target_link_libraries(parameters_interface INTERFACE usr_parameters)
+target_link_libraries(kernel_parameters_interface INTERFACE parameters)
 else()
-	target_link_libraries(parameters_interface INTERFACE parameters)
+target_link_libraries(parameters_interface INTERFACE parameters)
 endif()
 
 # firmware added last to generate the builtin for included modules
@@ -457,13 +490,17 @@ include(doxygen)
 include(metadata)
 include(package)
 
+# print size
+add_custom_target(size
+	COMMAND size $<TARGET_FILE:px4>
+	DEPENDS px4
+	WORKING_DIRECTORY ${PX4_BINARY_DIR}
+	USES_TERMINAL
+	)
+
 # install python requirements using configured python
 add_custom_target(install_python_requirements
 	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )
-
-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
-	include(finalize)
-endif()

Documentation/Doxyfile.in

@@ -829,6 +829,7 @@ RECURSIVE              = YES
 # run.
 
 EXCLUDE                = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libuavcan \
+                         @CMAKE_SOURCE_DIR@/src/modules/micrortps_bridge/micro-CDR \
                          @CMAKE_SOURCE_DIR@/src/examples \
                          @CMAKE_SOURCE_DIR@/src/templates
 

Jenkinsfile

@@ -13,6 +13,76 @@ pipeline {
         }
       }
       parallel {
+        // stage('Catkin build on ROS workspace') {
+        //   agent {
+        //     docker {
+        //       image 'px4io/px4-dev-ros-melodic:2021-08-18'
+        //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
+        //     }
+        //   }
+        //   steps {
+        //     sh 'ls -l'
+        //     sh '''#!/bin/bash -l
+        //       echo $0;
+        //       mkdir -p catkin_ws/src;
+        //       cd catkin_ws;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo
+        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/simulation/gazebo/sitl_gazebo src/mavlink_sitl_gazebo;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware fetch --tags;
+        //       source /opt/ros/melodic/setup.bash;
+        //       export PYTHONPATH=/opt/ros/$ROS_DISTRO/lib/python2.7/dist-packages:/usr/lib/python2.7/dist-packages:/usr/local/lib/python2.7/dist-packages;
+        //       catkin init;
+        //       catkin build -j$(nproc) -l$(nproc);
+        //     '''
+        //     // test if the binary was correctly installed and runs using 'mavros_posix_sitl.launch'
+        //     sh '''#!/bin/bash -l
+        //       echo $0;
+        //       source catkin_ws/devel/setup.bash;
+        //       rostest px4 pub_test.launch;
+        //     '''
+        //   }
+        //   post {
+        //     always {
+        //       sh 'rm -rf catkin_ws'
+        //     }
+        //     failure {
+        //       archiveArtifacts(allowEmptyArchive: false, artifacts: '.ros/**/*.xml, .ros/**/*.log')
+        //     }
+        //   }
+        //   options {
+        //     checkoutToSubdirectory('catkin_ws/src/Firmware')
+        //   }
+        // }
+
+        stage('Colcon build on ROS2 workspace') {
+          agent {
+            docker {
+              image 'px4io/px4-dev-ros2-foxy:2021-08-18'
+              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
+            }
+          }
+          steps {
+            sh 'ls -l'
+            sh '''#!/bin/bash -l
+              echo $0;
+              unset ROS_DISTRO;
+              mkdir -p colcon_ws/src;
+              cd colcon_ws;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware fetch --tags;
+              source /opt/ros/foxy/setup.sh;
+              colcon build --event-handlers console_direct+ --symlink-install;
+            '''
+          }
+          post {
+            always {
+              sh 'rm -rf colcon_ws'
+            }
+          }
+          options {
+            checkoutToSubdirectory('colcon_ws/src/Firmware')
+          }
+        }
 
         stage('Airframe') {
           agent {
@@ -79,7 +149,7 @@ pipeline {
             docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
-            sh 'mkdir -p build/msg_docs; ./Tools/msg/generate_msg_docs.py -d build/msg_docs'
+            sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
             dir('build') {
               archiveArtifacts(artifacts: 'msg_docs/*.md')
               stash includes: 'msg_docs/*.md', name: 'msg_documentation'
@@ -92,36 +162,6 @@ pipeline {
           }
         }
 
-        stage('failsafe docs') {
-          agent {
-            docker { image 'px4io/px4-dev-nuttx-focal:2021-08-18' }
-          }
-          steps {
-            sh '''#!/bin/bash -l
-            echo $0;
-            git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk;
-            cd _emscripten_sdk;
-            ./emsdk install latest;
-            ./emsdk activate latest;
-            cd ..;
-            . ./_emscripten_sdk/emsdk_env.sh;
-            make failsafe_web;
-            cd build/px4_sitl_default_failsafe_web;
-            mkdir -p failsafe_sim;
-            cp index.* parameters.json failsafe_sim;
-            '''
-            dir('build/px4_sitl_default_failsafe_web') {
-              archiveArtifacts(artifacts: 'failsafe_sim/*')
-              stash includes: 'failsafe_sim/*', name: 'failsafe_sim'
-            }
-          }
-          post {
-            always {
-              sh 'make distclean; git clean -ff -x -d .'
-            }
-          }
-        }
-
         stage('uORB graphs') {
           agent {
             docker {
@@ -163,7 +203,6 @@ pipeline {
             unstash 'metadata_parameters'
             unstash 'metadata_module_documentation'
             unstash 'msg_documentation'
-            unstash 'failsafe_sim'
             unstash 'uorb_graph'
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/PX4-user_guide.git')
@@ -172,7 +211,6 @@ pipeline {
               sh('cp -R modules/*.md PX4-user_guide/en/modules/')
               sh('cp -R graph_*.json PX4-user_guide/.vuepress/public/en/middleware/')
               sh('cp -R msg_docs/*.md PX4-user_guide/en/msg_docs/')
-              sh('cp -R failsafe_sim/* PX4-user_guide/.vuepress/public/en/config/failsafe')
               sh('cd PX4-user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
               sh('cd PX4-user_guide; git push origin main || true')
               sh('rm -rf PX4-user_guide')
@@ -219,6 +257,37 @@ pipeline {
           }
         }
 
+        stage('microRTPS agent') {
+          agent {
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+          }
+          steps {
+            sh('export')
+            sh('git fetch --all --tags')
+            sh('make distclean; git clean -ff -x -d .')
+            sh('make px4_sitl_rtps')
+            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
+              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
+              sh("rm -rf micrortps_agent/src micrortps_agent/idl")
+              sh('cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent')
+              sh('cd micrortps_agent; git status; git add src; git commit -a -m "Update microRTPS agent source code `date`" || true')
+              sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
+              sh('cd micrortps_agent; git status; git add idl; git commit -a -m "Update IDL definitions `date`" || true')
+              sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
+              sh('cd micrortps_agent; git status; git add CMakeLists.txt; git commit -a -m "Update CMakeLists.txt `date`" || true')
+              sh('cd micrortps_agent; git push origin ${BRANCH_NAME} || true')
+              sh('rm -rf micrortps_agent')
+            }
+          }
+          when {
+            anyOf {
+              branch 'main'
+              branch 'master' // should be removed, but in case there is something going on...
+              branch 'pr-jenkins' // for testing
+            }
+          }
+        }
+
         stage('PX4 ROS msgs') {
           agent {
             docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
@@ -228,17 +297,67 @@ pipeline {
             sh('make distclean; git clean -ff -x -d .')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
-              // 'main' branch
-              sh('rm -f px4_msgs/msg/*.msg')
-              sh('cp msg/*.msg px4_msgs/msg/')
+              // 'master' branch
+              sh('./msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/')
               sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
-              sh('cd px4_msgs; git push origin main || true')
+              sh('cd px4_msgs; git push origin master || true')
+              // 'ros1' branch
+              sh('cd px4_msgs; git checkout ros1')
+              sh('./msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/')
+              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
+              sh('cd px4_msgs; git push origin ros1 || true')
               sh('rm -rf px4_msgs')
             }
           }
           when {
             anyOf {
               branch 'main'
+              branch 'master' // should be removed, but in case there is something going on...
+              branch 'pr-jenkins' // for testing
+            }
+          }
+        }
+
+        stage('PX4 ROS2 bridge') {
+          agent {
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+          }
+          steps {
+            sh('export')
+            sh('make distclean; git clean -ff -x -d .')
+            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
+              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
+              // deploy uORB RTPS ID map
+              sh('./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml')
+              sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS ID map `date`" || true')
+              sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
+              // deploy uORB RTPS required tools
+              sh('cp msg/tools/uorb_rtps_classifier.py px4_ros_com/scripts/uorb_rtps_classifier.py')
+              sh('cp msg/tools/generate_microRTPS_bridge.py px4_ros_com/scripts/generate_microRTPS_bridge.py')
+              sh('cp msg/tools/px_generate_uorb_topic_files.py px4_ros_com/scripts/px_generate_uorb_topic_files.py')
+              sh('cp msg/tools/px_generate_uorb_topic_helper.py px4_ros_com/scripts/px_generate_uorb_topic_helper.py')
+              // deploy templates
+              sh('cp msg/templates/urtps/microRTPS_agent.cpp.em px4_ros_com/templates/microRTPS_agent.cpp.em')
+              sh('cp msg/templates/urtps/microRTPS_timesync.cpp.em px4_ros_com/templates/microRTPS_timesync.cpp.em')
+              sh('cp msg/templates/urtps/microRTPS_timesync.h.em px4_ros_com/templates/microRTPS_timesync.h.em')
+              sh('cp msg/templates/urtps/microRTPS_transport.cpp px4_ros_com/templates/microRTPS_transport.cpp')
+              sh('cp msg/templates/urtps/microRTPS_transport.h px4_ros_com/templates/microRTPS_transport.h')
+              sh('cp msg/templates/urtps/Publisher.cpp.em px4_ros_com/templates/Publisher.cpp.em')
+              sh('cp msg/templates/urtps/Publisher.h.em px4_ros_com/templates/Publisher.h.em')
+              sh('cp msg/templates/urtps/Subscriber.cpp.em px4_ros_com/templates/Subscriber.cpp.em')
+              sh('cp msg/templates/urtps/Subscriber.h.em px4_ros_com/templates/Subscriber.h.em')
+              sh('cp msg/templates/urtps/RtpsTopics.cpp.em px4_ros_com/templates/RtpsTopics.cpp.em')
+              sh('cp msg/templates/urtps/RtpsTopics.h.em px4_ros_com/templates/RtpsTopics.h.em')
+              sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS script tools `date`" || true')
+              sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
+              sh('rm -rf px4_msgs')
+            }
+          }
+          when {
+            anyOf {
+              branch 'main'
+              branch 'master' // should be removed, but in case there is something going on...
+              branch 'pr-jenkins' // for testing
             }
           }
         }

Kconfig

@@ -17,8 +17,6 @@ menu "Toolchain"
             bool "posix"
         config PLATFORM_QURT
             bool "qurt"
-        config PLATFORM_ROS2
-            bool "ros2"
     endchoice
 
     config BOARD_PLATFORM
@@ -26,7 +24,6 @@ menu "Toolchain"
         default "nuttx" if PLATFORM_NUTTX
         default "posix" if PLATFORM_POSIX
         default "qurt" if PLATFORM_QURT
-        default "ros2" if PLATFORM_ROS2
 
     config BOARD_LOCKSTEP
         bool "Force enable lockstep"
@@ -40,8 +37,8 @@ menu "Toolchain"
         help
             forces nolockstep behaviour, despite REPLAY env variable
 
-    config BOARD_LINUX_TARGET
-        bool "Linux OS Target"
+    config BOARD_LINUX
+        bool "Linux OS"
         depends on PLATFORM_POSIX
         help
             Board Platform is running the Linux operating system
@@ -193,7 +190,3 @@ endmenu
 menu "examples"
 source "src/examples/Kconfig"
 endmenu
-
-menu "platforms"
-source "platforms/common/Kconfig"
-endmenu

Makefile

@@ -172,6 +172,11 @@ ifdef PYTHON_EXECUTABLE
 	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif
 
+# Check if the microRTPS agent is to be built
+ifdef BUILD_MICRORTPS_AGENT
+  override CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
+endif
+
 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
@@ -248,7 +253,7 @@ endef
 # Other targets
 # --------------------------------------------------------------------
 
-.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware
+.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware check_rtps
 
 # QGroundControl flashable NuttX firmware
 qgc_firmware: px4fmu_firmware misc_qgc_extra_firmware
@@ -273,7 +278,15 @@ misc_qgc_extra_firmware: \
 	check_airmind_mindpx-v2_default \
 	sizes
 
-.PHONY: sizes check quick_check uorb_graphs
+# builds with RTPS
+check_rtps: \
+	check_px4_fmu-v3_rtps \
+	check_px4_fmu-v4_rtps \
+	check_px4_fmu-v4pro_rtps \
+	check_px4_sitl_rtps \
+	sizes
+
+.PHONY: sizes check quick_check check_rtps uorb_graphs
 
 sizes:
 	@-find build -name *.elf -type f | xargs size 2> /dev/null || :
@@ -307,10 +320,8 @@ px4io_update:
 	@$(MAKE) --no-print-directory px4_io-v2_default
 	@$(MAKE) --no-print-directory cubepilot_io-v2_default
 	# px4_io-v2_default
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/ark/fmu-v6x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21-777/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v2/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v3/extras/px4_io-v2_default.bin
@@ -324,11 +335,7 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-jlink-nuttx:
-	$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
-
-
-bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
 .PHONY: coverity_scan
@@ -486,9 +493,7 @@ shellcheck_all:
 
 validate_module_configs:
 	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
-	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
-	-not -path "$(SRC_DIR)/src/modules/microdds_client/dds_topics.yaml" \
-	-not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
+	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" -not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
 	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
 
 # Cleanup
@@ -554,12 +559,17 @@ check_px4: $(call make_list,nuttx,"px4") \
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes
 
-.PHONY: failsafe_web run_failsafe_web_server
-failsafe_web:
-	@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
-	@$(MAKE) --no-print-directory px4_sitl_default failsafe_test parameters_xml \
-		PX4_CMAKE_BUILD_TYPE=Release BUILD_DIR_SUFFIX=_failsafe_web \
-		CMAKE_ARGS="-DCMAKE_CXX_COMPILER=em++ -DCMAKE_C_COMPILER=emcc"
-run_failsafe_web_server: failsafe_web
-	@cd build/px4_sitl_default_failsafe_web && \
-		python3 -m http.server
+ifneq ($(ROS2_WS_DIR),)
+  ROS2_WS_DIR := $(basename ${ROS2_WS_DIR})
+else
+  ROS2_WS_DIR := ~/colcon_ws
+endif
+
+update_ros2_bridge:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --all
+
+update_px4_ros_com:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_ros_com
+
+update_px4_msgs:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_msgs

README.md

@@ -4,7 +4,7 @@
 
 [![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
 
-[![Discord Shield](https://discordapp.com/api/guilds/1022170275984457759/widget.png?style=shield)](https://discord.gg/dronecode)
+[![Slack](/.github/slack.svg)](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)
 
 This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
 
@@ -75,7 +75,7 @@ The PX4 Dev Team syncs up on a [weekly dev call](https://docs.px4.io/main/en/con
     * [Paul Riseborough](https://github.com/priseborough)
   * Vision based navigation and Obstacle Avoidance
     * [Markus Achtelik](https://github.com/markusachtelik)
-  * DDS/ROS2 Interface
+  * RTPS/ROS2 Interface
     * [Nuno Marques](https://github.com/TSC21)
 
 See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and the [contributors list](https://github.com/PX4/PX4-Autopilot/graphs/contributors) (Github).

ROMFS/cannode/init.d/rcS

@@ -31,11 +31,6 @@ then
 	set PARAM_FILE /dev/eeeprom0
 fi
 
-if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
-then
-	set PARAM_FILE /mnt/qspi/params
-fi
-
 #
 # Load parameters.
 #

ROMFS/px4fmu_common/CMakeLists.txt

@@ -32,6 +32,7 @@
 ############################################################################
 
 add_subdirectory(init.d)
+add_subdirectory(mixers)
 # TODO: make this configurable from the board config, or better combine
 if("${PX4_BOARD}" MATCHES "sitl")
 	add_subdirectory(init.d-posix)

ROMFS/px4fmu_common/init.d-posix/CMakeLists.txt

@@ -36,6 +36,7 @@ add_subdirectory(airframes)
 px4_add_romfs_files(
 	px4-rc.mavlink
 	px4-rc.params
+	px4-rc.rtps
 	px4-rc.simulator
 	rc.replay
 	rcS

ROMFS/px4fmu_common/init.d-posix/airframes/10016_gazebo_iris

@@ -30,3 +30,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+

ROMFS/px4fmu_common/init.d-posix/airframes/10017_jmavsim_iris

@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL
+#
+# @type Quadrotor Wide
+#
+# @maintainer Julian Oes <julian@oes.ch>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=jmavsim}
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+

ROMFS/px4fmu_common/init.d-posix/airframes/10018_gazebo_iris_foggy_lidar

@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-param set-default EKF2_RNG_A_HMAX 10
-

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -41,4 +41,3 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
 param set SIH_VEHICLE_TYPE 0
-

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -14,7 +14,7 @@ PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 0
 param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_S_Y 0.3
+param set-default VT_FW_DIFTHR_SC 0.3
 param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5
 

ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo_iris_opt_flow

@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
+
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1011_gazebo_iris_irlock

@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (irlock)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
+
+# Start up Landing Target Estimator module
+landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -1,16 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1012_gazebo_iris_rplidar

@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (rplidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1012_iris_rplidar

@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-param set-default LPE_FUSION 242
-

ROMFS/px4fmu_common/init.d-posix/airframes/1013_gazebo_iris_vision

@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2: Vision position and heading
+param set-default EKF2_AID_MASK 24
+param set-default EKF2_EV_DELAY 5
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Vision + baro
+param set-default LPE_FUSION 132
+
+# AEQ: External heading set to use vision input
+param set-default ATT_EXT_HDG_M 1
+

ROMFS/px4fmu_common/init.d-posix/airframes/1013_iris_vision

@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Vision)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2: Vision position and heading
-param set-default EKF2_AID_MASK 24
-param set-default EKF2_EV_DELAY 5
-param set-default EKF2_EV_CTRL 15
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Vision + baro
-param set-default LPE_FUSION 132
-
-# AEQ: External heading set to use vision input
-param set-default ATT_EXT_HDG_M 1
-

ROMFS/px4fmu_common/init.d-posix/airframes/1015_gazebo_iris_obs_avoid

@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1015_iris_obs_avoid

@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-param set-default COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
-

ROMFS/px4fmu_common/init.d-posix/airframes/1017_gazebo_iris_opt_flow_mockup

@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Vision Velocity)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2: Vision velocity and heading
-param set-default EKF2_AID_MASK 272
-param set-default EKF2_EV_DELAY 5
-param set-default EKF2_GPS_CTRL 0

ROMFS/px4fmu_common/init.d-posix/airframes/1019_gazebo_iris_dual_gps

@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Dual GPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1019_iris_dual_gps

@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo_plane

@@ -8,6 +8,7 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 
 param set-default FW_L1_PERIOD 12
@@ -40,6 +41,7 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo_plane_cam

@@ -0,0 +1,81 @@
+#!/bin/sh
+#
+# @name Plane SITL with camera
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1031_plane_cam

@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo_plane_catapult

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name Advanced Plane SITL
+# @name Plane SITL with catapult
 #
 
 . ${R}etc/init.d/rc.fw_defaults
@@ -8,19 +8,30 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
-param set-default FW_THR_LND_MAX 0
 
 param set-default FW_L1_PERIOD 12
 
-param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
 
 param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
 param set-default FW_SPOILERS_LND 0.4
 
+param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_TRIM 0.25
 
@@ -30,6 +41,7 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
@@ -37,7 +49,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-#param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 1
 
 param set-default CA_ROTOR_COUNT 1
@@ -63,6 +74,5 @@ param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
 
+param set-default RWTO_TKOFF 0
 
-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1032_plane_catapult

@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default RWTO_TKOFF 0
-

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -0,0 +1,66 @@
+#!/bin/sh
+#
+# @name Plane SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+
+param set-default FW_L1_PERIOD 25
+
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
+
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default RWTO_MAX_PITCH 20
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -5,6 +5,7 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -31,7 +33,11 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
+
+param set-default RWTO_MAX_PITCH 20
+
 param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 param set-default CA_AIRFRAME 1
 
@@ -57,4 +63,3 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
-

ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo_techpod

@@ -8,6 +8,7 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 
 param set-default FW_L1_PERIOD 15
@@ -26,6 +27,7 @@ param set-default FW_L1_PERIOD 12
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -5,6 +5,7 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -31,7 +33,9 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
+param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 param set-default CA_AIRFRAME 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo_believer

@@ -8,6 +8,7 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
+param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 
 param set-default FW_L1_PERIOD 12
@@ -33,11 +34,14 @@ param set-default FW_T_TAS_TC 2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
+param set-default FW_USE_NPFG 1
+
 param set-default RWTO_TKOFF 1
 
 param set-default CA_AIRFRAME 1

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo_glider

@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+param set-default FW_THR_TRIM 0.0
+param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1038_glider

@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -5,6 +5,7 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -23,6 +24,7 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -31,7 +33,11 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
+
+param set-default RWTO_MAX_PITCH 20
+
 param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 param set-default CA_AIRFRAME 1
 
@@ -57,4 +63,3 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
-

ROMFS/px4fmu_common/init.d-posix/airframes/1040_gazebo_standard_vtol

@@ -61,7 +61,6 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
 
@@ -77,6 +76,8 @@ param set-default NAV_ACC_RAD 5
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2
 

ROMFS/px4fmu_common/init.d-posix/airframes/1041_gazebo_tailsitter

@@ -58,7 +58,6 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 param set-default FW_T_TAS_TC 2
 
-param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 
 param set-default MPC_ACC_HOR_MAX 2
@@ -70,7 +69,7 @@ param set-default MPC_XY_VEL_D_ACC 0.1
 param set-default NAV_ACC_RAD 5
 
 param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_S_Y 0.5
+param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/1042_gazebo_tiltrotor

@@ -34,6 +34,8 @@ param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL0_CT 0
+param set-default CA_SV_TL1_CT 0
 param set-default CA_SV_TL_COUNT 2
 
 param set-default PWM_MAIN_FUNC1 101
@@ -60,7 +62,6 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
-param set-default MC_AIRMODE 1
 param set-default MC_YAWRATE_P 0.3
 param set-default MC_YAWRATE_I 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo_standard_vtol_drop

@@ -0,0 +1,93 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
+param set-default CA_AIRFRAME 2
+
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+
+param set-default FW_L1_PERIOD 12
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
+
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
+param set-default NAV_ACC_RAD 5
+
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
+
+
+# Gimbal
+param set-default PWM_MAIN_FUNC9 420
+param set-default PWM_MAIN_FUNC10 421
+param set-default PWM_MAIN_FUNC11 422
+
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL
-#
-# @type Standard VTOL
-#
-
-. ${R}etc/init.d-posix/airframes/1040_standard_vtol
-
-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
-
-param set-default RC_MAP_AUX1 8
-param set-default RC_MAP_AUX2 9
-param set-default RC_MAP_AUX3 10
-

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo_plane_lidar

@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# @name Plane SITL with downward facing LIDAR.
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
+param set-default FW_LND_USETER 1

ROMFS/px4fmu_common/init.d-posix/airframes/1044_plane_lidar

@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with downward facing LIDAR.
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default FW_LND_USETER 1
-

ROMFS/px4fmu_common/init.d-posix/airframes/1060_gazebo_rover

@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/1061_gazebo_r1_rover

@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/1062_flightgear_tf-r1

@@ -25,6 +25,7 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/1070_gazebo_boat

@@ -18,6 +18,7 @@ param set-default GND_THR_CRUISE 0.85
 param set-default GND_THR_MAX 1
 param set-default GND_THR_MIN 0
 
+param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1

@@ -20,6 +20,7 @@ param set-default FW_W_EN 1
 
 param set-default FW_RR_P 0.08
 
+param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 3
 
 param set-default NAV_ACC_RAD 20

ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2

@@ -20,6 +20,7 @@ param set-default FW_W_EN 1
 
 param set-default FW_RR_P 0.08
 
+param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 7
 
 param set-default NAV_ACC_RAD 20

ROMFS/px4fmu_common/init.d-posix/airframes/4001_ign_x500

@@ -1,15 +1,17 @@
 #!/bin/sh
 #
-# @name Gazebo x500
+# @name Ignition Gazebo X3
 #
 # @type Quadrotor
 #
 
 . ${R}etc/init.d/rc.mc_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}
+PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
+
+param set-default SYS_CTRL_ALLOC 1
 
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 4
@@ -30,19 +32,19 @@ param set-default CA_ROTOR3_PX -0.13
 param set-default CA_ROTOR3_PY 0.20
 param set-default CA_ROTOR3_KM -0.05
 
-param set-default SIM_GZ_FUNC1 101
-param set-default SIM_GZ_FUNC2 102
-param set-default SIM_GZ_FUNC3 103
-param set-default SIM_GZ_FUNC4 104
+param set-default SIM_IGN_FUNC1 101
+param set-default SIM_IGN_FUNC2 102
+param set-default SIM_IGN_FUNC3 103
+param set-default SIM_IGN_FUNC4 104
 
-param set-default SIM_GZ_MIN1 150
-param set-default SIM_GZ_MIN2 150
-param set-default SIM_GZ_MIN3 150
-param set-default SIM_GZ_MIN4 150
+param set-default SIM_IGN_MIN1 150
+param set-default SIM_IGN_MIN2 150
+param set-default SIM_IGN_MIN3 150
+param set-default SIM_IGN_MIN4 150
 
-param set-default SIM_GZ_MAX1 1000
-param set-default SIM_GZ_MAX2 1000
-param set-default SIM_GZ_MAX3 1000
-param set-default SIM_GZ_MAX4 1000
+param set-default SIM_IGN_MAX1 1000
+param set-default SIM_IGN_MAX2 1000
+param set-default SIM_IGN_MAX3 1000
+param set-default SIM_IGN_MAX4 1000
 
 param set-default MPC_THR_HOVER 0.60

ROMFS/px4fmu_common/init.d-posix/airframes/6001_ign_x4

@@ -0,0 +1,80 @@
+#!/bin/sh
+#
+# @name Ignition Gazebo X4
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x4}
+PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 6
+
+param set-default CA_ROTOR0_PX  0.25
+param set-default CA_ROTOR0_PY -0.15
+param set-default CA_ROTOR0_KM  0.05
+
+param set-default CA_ROTOR1_PX  0.00
+param set-default CA_ROTOR1_PY -0.29
+param set-default CA_ROTOR1_KM -0.05
+
+param set-default CA_ROTOR2_PX -0.25
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM  0.05
+
+param set-default CA_ROTOR3_PX -0.25
+param set-default CA_ROTOR3_PY  0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR4_PX  0.00
+param set-default CA_ROTOR4_PY  0.29
+param set-default CA_ROTOR4_KM  0.05
+
+param set-default CA_ROTOR5_PX  0.25
+param set-default CA_ROTOR5_PY  0.15
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default SIM_IGN_FUNC1 101
+param set-default SIM_IGN_FUNC2 102
+param set-default SIM_IGN_FUNC3 103
+param set-default SIM_IGN_FUNC4 104
+param set-default SIM_IGN_FUNC5 105
+param set-default SIM_IGN_FUNC6 106
+
+param set-default SIM_IGN_MIN1 150
+param set-default SIM_IGN_MIN2 150
+param set-default SIM_IGN_MIN3 150
+param set-default SIM_IGN_MIN4 150
+param set-default SIM_IGN_MIN5 150
+param set-default SIM_IGN_MIN6 150
+
+param set-default SIM_IGN_MAX1 1000
+param set-default SIM_IGN_MAX2 1000
+param set-default SIM_IGN_MAX3 1000
+param set-default SIM_IGN_MAX4 1000
+param set-default SIM_IGN_MAX5 1000
+param set-default SIM_IGN_MAX6 1000
+
+
+param set-default MC_PITCHRATE_D 0.0016
+param set-default MC_PITCHRATE_I 0.2500
+param set-default MC_PITCHRATE_P 0.1831
+param set-default MC_PITCH_P 5.216
+
+param set-default MC_ROLLRATE_D 0.0022
+param set-default MC_ROLLRATE_I 0.2095
+param set-default MC_ROLLRATE_P 0.1570
+param set-default MC_ROLL_P 6.081
+
+param set-default MC_YAWRATE_D 0.0009
+param set-default MC_YAWRATE_I 0.1800
+param set-default MC_YAWRATE_P 0.1773
+param set-default MC_YAW_P 5.386490
+
+param set-default MPC_THR_HOVER 0.61

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -32,54 +32,58 @@
 ############################################################################
 
 px4_add_romfs_files(
-	10016_iris
-	10018_iris_foggy_lidar
-	10019_omnicopter
-	10030_px4vision
-	10040_quadx
-	10041_airplane
-	10042_xvert
-	1010_iris_opt_flow
-	1010_iris_opt_flow.post
-	1011_iris_irlock
-	1012_iris_rplidar
-	1013_iris_vision
-	1013_iris_vision.post
-	1015_iris_obs_avoid
-	1015_iris_obs_avoid.post
-	1017_iris_opt_flow_mockup
-	1018_iris_vision_velocity
-	1019_iris_dual_gps
-	1021_uuv_hippocampus
-	1022_uuv_bluerov2_heavy
-	1030_plane
-	1031_plane_cam
-	1032_plane_catapult
-	1033_rascal
-	1034_rascal-electric
-	1035_techpod
-	1036_malolo
-	1037_believer
-	1038_glider
-	1039_advanced_plane
-	1040_standard_vtol
-	1041_tailsitter
-	1042_tiltrotor
-	1043_standard_vtol_drop
-	1044_plane_lidar
-	1060_rover
-	1061_r1_rover
-	1062_tf-r1
-	1070_boat
-	3010_quadrotor_x
-	3011_hexarotor_x
+	1010_gazebo_iris_opt_flow
+	1010_gazebo_iris_opt_flow.post
+	1011_gazebo_iris_irlock
+	1012_gazebo_iris_rplidar
+	1013_gazebo_iris_vision
+	1013_gazebo_iris_vision.post
+	1015_gazebo_iris_obs_avoid
+	1015_gazebo_iris_obs_avoid.post
+	1017_gazebo_iris_opt_flow_mockup
+	1019_gazebo_iris_dual_gps
+	1021_gazebo_uuv_hippocampus
+	1022_gazebo_uuv_bluerov2_heavy
+	1030_gazebo_plane
+	1031_gazebo_plane_cam
+	1032_gazebo_plane_catapult
+	1033_jsbsim_rascal
+	1034_flightgear_rascal-electric
+	1035_gazebo_techpod
+	1036_jsbsim_malolo
+	1037_gazebo_believer
+	1038_gazebo_glider
+	1039_flightgear_rascal
+	1040_gazebo_standard_vtol
+	1041_gazebo_tailsitter
+	1042_gazebo_tiltrotor
+	1043_gazebo_standard_vtol_drop
+	1044_gazebo_plane_lidar
+	1060_gazebo_rover
+	1061_gazebo_r1_rover
+	1062_flightgear_tf-r1
+	1070_gazebo_boat
 
-	4001_x500
+	2507_gazebo_cloudship
 
-	17001_tf-g1
-	17002_tf-g2
-	2507_cloudship
+	3010_jsbsim_quadrotor_x
+	3011_jsbsim_hexarotor_x
 
-	6011_typhoon_h480
-	6011_typhoon_h480.post
+	4001_ign_x500
+
+	6001_ign_x4
+	6011_gazebo_typhoon_h480
+	6011_gazebo_typhoon_h480.post
+
+	10016_gazebo_iris
+	10017_jmavsim_iris
+	10018_gazebo_iris_foggy_lidar
+	10019_gazebo_omnicopter
+	10030_gazebo_px4vision
+	10040_sihsim_quadx
+	10041_sihsim_airplane
+	10042_sihsim_xvert
+
+	17001_flightgear_tf-g1
+	17002_flightgear_tf-g2
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -3,7 +3,7 @@
 
 udp_offboard_port_local=$((14580+px4_instance))
 udp_offboard_port_remote=$((14540+px4_instance))
-[ "$px4_instance" -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
+[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
 udp_onboard_payload_port_local=$((14280+px4_instance))
 udp_onboard_payload_port_remote=$((14030+px4_instance))
 udp_onboard_gimbal_port_local=$((13030+px4_instance))

ROMFS/px4fmu_common/init.d-posix/px4-rc.rtps

@@ -0,0 +1,4 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -6,107 +6,60 @@ param set-default IMU_INTEG_RATE 250
 
 if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
 
-	if simulator_sih start; then
+	echo "INFO  [init] SIH simulator"
 
-		sensor_baro_sim start
-		sensor_gps_sim start
-		sensor_mag_sim start
-
-	else
-		echo "ERROR [init] simulator_sih failed to start"
+	if ! simulator_sih start; then
+		echo "ERROR  [init] simulator_sih failed to start"
 		exit 1
 	fi
 
-elif [ "$PX4_SIMULATOR" = "gz" ]; then
+elif [ "$PX4_SIMULATOR" = "ignition" ]; then
+
+	echo "INFO  [init] Ignition Gazebo simulator"
 
 	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f ./gazebo_env.sh ]; then
+	if [ -f gazebo_env.sh ]; then
 		. ./gazebo_env.sh
-
 	elif [ -f ../gazebo_env.sh ]; then
 		. ../gazebo_env.sh
 	fi
 
-	gz_command="ign" # "ign" before garden
-	gz_sub_command="gazebo" # "gazebo" before garden
+	if ! ign service --info --service /world/${PX4_SIM_WORLD}/create | grep "ignition.msgs.EntityFactory"; then
+		# starting ign gazebo with ${PX4_SIM_WORLD} world
+		echo "INFO  [init] starting ign gazebo"
 
-	# look for running ${gz_command} gazebo world
-	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-
-	# shellcheck disable=SC2153
-	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
-
-		echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
-
-		${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
-
-		if [ -z "${HEADLESS}" ]; then
-			# HEADLESS not set, starting ign gazebo gui
-			${gz_command} gazebo -g &
+		if [ -z $HEADLESS ]; then
+			ign gazebo --verbose=1 -r "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
+		else
+			# starting ign gazebo headless
+			ign gazebo --verbose=1 -r -s "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
 		fi
-
 	else
-		echo "INFO  [init] gazebo already running world: ${gz_world}"
-		PX4_GZ_WORLD=${gz_world}
+		echo "INFO  [init] ign gazebo already running"
 	fi
 
-	# start gz_bridge
-	if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
-		# model specified, gz_bridge will spawn model
-
-		if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
-			# Clean potential input line formatting.
-			model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
-			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
-
-		else
-			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
-			model_pose="0,0,0,0,0,0"
-		fi
-
-		# start gz bridge with pose arg.
-		if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-
-		else
-			echo "ERROR [init] gazebo failed to start"
-			exit 1
-		fi
-
-	elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
-		# model name specificed, gz_bridge will attach to existing model
-
-		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-
-		else
-			echo "ERROR [init] gazebo failed to start"
-			exit 1
-		fi
-
-	elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
-
-		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
-
-		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-
-		else
-			echo "ERROR [init] gazebo failed to start"
-			exit 1
-		fi
-
+	if simulator_ignition_bridge start -m "${PX4_SIM_MODEL#*ign_}" -w "${PX4_SIM_WORLD}"; then
+		sensor_baro_sim start
+		sensor_gps_sim start
+		sensor_mag_sim start
 	else
-		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
+		echo "ERROR  [init] ign gazebo failed to start"
 		exit 1
 	fi
 
+elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$PX4_SIMULATOR" = "jmavsim" ]; then
+
+	echo "INFO  [init] jMAVSim simulator"
+
+	if jps | grep -i jmavsim; then
+		kill $(jps | grep -i jmavsim | awk '{print $1}') || true
+		sleep 1
+	fi
+
+	./jmavsim_run.sh -l -r 250 &
+
+	simulator_mavlink start -h localhost $((4560+px4_instance))
+
 else
 	# otherwise start simulator (mavlink) module
 	simulator_tcp_port=$((4560+px4_instance))
@@ -117,16 +70,16 @@ else
 	if [ -z "${PX4_SIM_HOSTNAME}" ]; then
 
 		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "PX4 SIM HOST: localhost"
+			echo "INFO  [init] PX4_SIM_HOSTNAME: localhost"
 			simulator_mavlink start -c $simulator_tcp_port
 		else
-			echo "PX4 SIM HOST: ${PX4_SIM_HOST_ADDR}"
-			simulator_mavlink start -t "${PX4_SIM_HOST_ADDR}" "${simulator_tcp_port}"
+			echo "INFO  [init] PX4_SIM_HOSTNAME: $PX4_SIM_HOST_ADDR"
+			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
 		fi
 
 	else
-		echo "PX4 SIM HOST: ${PX4_SIM_HOSTNAME}"
-		simulator_mavlink start -h "${PX4_SIM_HOSTNAME}" "${simulator_tcp_port}"
+		echo "INFO  [init] PX4_SIM_HOSTNAME: $PX4_SIM_HOSTNAME"
+		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
 	fi
 
 fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -1,9 +1,6 @@
 #!/bin/sh
 
-# Un comment and use set +e to ignore and set -e to enable 'exit on error control'
-set +e
-# Un comment the line below to help debug scripts by printing a trace of the script commands
-#set -x
+#set -e
 
 # PX4 commands need the 'px4-' prefix in bash.
 # (px4-alias.sh is expected to be in the PATH)
@@ -26,6 +23,16 @@ then
 fi
 
 # initialize script variables
+set IO_PRESENT                  no
+set MIXER                       skip
+set MIXER_AUX                   none
+set MIXER_FILE                  none
+set OUTPUT_MODE                 sim
+set EXTRA_MIXER_MODE            none
+set PWM_OUT                     none
+set PWM_AUX_OUT                 none
+set SDCARD_MIXERS_PATH          etc/mixers
+set USE_IO                      no
 set VEHICLE_TYPE                none
 set LOGGER_ARGS                 ""
 set LOGGER_BUF                  1000
@@ -55,7 +62,7 @@ then
 	# shellcheck disable=SC2012
 	REQUESTED_AUTOSTART=$(ls "${R}etc/init.d-posix/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
 	if [ -z "$REQUESTED_AUTOSTART" ]; then
-		echo "ERROR [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
+		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
 		SYS_AUTOSTART=$REQUESTED_AUTOSTART
@@ -65,45 +72,18 @@ fi
 
 # Load parameters
 set PARAM_FILE parameters.bson
-set PARAM_BACKUP_FILE parameters_backup.bson
-
 param select $PARAM_FILE
-if [ -f $PARAM_FILE ]; then
 
-	if ! param import
+if [ -f $PARAM_FILE ]
+then
+	if param load
 	then
-		echo "ERROR [init] param import failed"
-
-		bsondump $PARAM_FILE
-
-		# try to make a backup copy
-		cp $PARAM_FILE param_import_fail.bson
-
-		# try importing from backup file
-		if [ -f $PARAM_BACKUP_FILE ]
-		then
-			echo "[init] importing from parameter backup"
-
-			# dump current backup file contents for comparison
-			bsondump $PARAM_BACKUP_FILE
-
-			param import $PARAM_BACKUP_FILE
-
-			# overwrite invalid $PARAM_FILE with backup
-			cp $PARAM_BACKUP_FILE $PARAM_FILE
-		fi
-
-		param status
+		echo "[param] Loaded: $PARAM_FILE"
+	else
+		echo "[param] FAILED loading $PARAM_FILE"
 	fi
-
-elif [ -f $PARAM_BACKUP_FILE ]; then
-	echo "ERROR [init] primary param file $PARAM_FILE unavailable, using backup $PARAM_BACKUP_FILE"
-	param import $PARAM_BACKUP_FILE
 fi
 
-param select-backup $PARAM_BACKUP_FILE
-
-
 # exit early when the minimal shell is requested
 [ $RUN_MINIMAL_SHELL = yes ] && exit 0
 
@@ -142,9 +122,7 @@ then
 	param set CAL_GYRO2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION
 
 	param set CAL_MAG0_ID 197388
-	param set CAL_MAG0_PRIO 50
 	param set CAL_MAG1_ID 197644
-	param set CAL_MAG1_PRIO 50
 
 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
@@ -227,7 +205,7 @@ then
 elif [ ! -e "$autostart_file" ] && [ "$SYS_AUTOSTART" -ne "0" ]
 then
 	echo "Error: no autostart file found ($autostart_file)"
-	#exit 1
+	exit 1
 fi
 
 #user defined params for instances can be in PATH
@@ -249,32 +227,19 @@ manual_control start
 sensors start
 commander start
 
-if ! pwm_out_sim start -m sim
-then
-	tune_control play error
-fi
-
-#
 # Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for all vehicle type specific setup.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
 . ${R}etc/init.d/rc.vehicle_setup
 
 navigator start
 
-# Try to start the microdds_client with UDP transport if module exists
-microdds_ns=""
-if [ "$px4_instance" -ne "0" ]
+# Try to start the micrortps_client with UDP transport if module exists
+if px4-micrortps_client status > /dev/null 2>&1
 then
-	# Assign new xrce dds key based on instance number and set default namespace
-	param set XRCE_DDS_KEY ${px4_instance}
-	microdds_ns="-n px4_$px4_instance"
+	. px4-rc.rtps
 fi
-if [ -n "$PX4_MICRODDS_NS" ]
-then
-	# Override namespace if environment variable is defined
-	microdds_ns="-n $PX4_MICRODDS_NS"
-fi
-microdds_client start -t udp -p 8888 $microdds_ns
 
 if param greater -s MNT_MODE_IN -1
 then
@@ -297,12 +262,6 @@ then
 	gyro_calibration start
 fi
 
-# Payload deliverer module if gripper is enabled
-if param compare -s PD_GRIPPER_EN 1
-then
-	payload_deliverer start
-fi
-
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink