boards: add auterion cannode

2026-05-26 07:57:35 +08:00 · 2025-06-13 18:40:37 +02:00
1585 changed files with 23585 additions and 21858 deletions
@@ -1,10 +0,0 @@
-# Labeler configuration file for GitHub Actions
-# The action is ./.github/workflows/label.yml
-# Docs for the syntax in this file can be found at
-# https://github.com/actions/labeler
-
-
-# Add 'Documentation' label to any changes within 'docs' folder or any subfolders
-"Documentation+📑":
- changed-files:
-  - any-glob-to-any-file: docs/**
@@ -18,7 +18,7 @@ on:
      - 'docs/**'
  pull_request:
    branches:
-      - '**'
+      - '*'
    paths-ignore:
      - 'docs/**'

@@ -6,15 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -43,7 +41,7 @@ jobs:
      - name: Building [${{ matrix.check }}]
        uses: addnab/docker-run-action@v3
        with:
-          image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+          image: px4io/px4-dev-nuttx-focal:2022-08-12
          options: -v ${{ github.workspace }}:/workspace
          run: |
            cd /workspace
@@ -6,11 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
 jobs:
  build:
    runs-on: ubuntu-latest
@@ -6,15 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -9,19 +9,17 @@ on:
      - 'release/**'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+      - '*'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'

 env:
  RUNS_IN_DOCKER: true

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 jobs:
  build_and_test:
    name: Build and Test
@@ -11,7 +11,7 @@ on:
      - 'v*'
  pull_request:
    branches:
-      - '**'
+      - '*'
    paths:
      - '.github/workflows/dev_container.yml'
      - 'Tools/setup/ubuntu.sh'
@@ -30,10 +30,6 @@ on:
        type: boolean
        default: false

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 jobs:
  setup:
    name: Set Tags and Variables
@@ -9,7 +9,7 @@ on:
      - 'docs/en/**'
  pull_request:
    branches:
-      - '**'
+      - '*'
    paths:
      - 'docs/en/**'

@@ -80,7 +80,7 @@ jobs:
      - name: Deploy
        run: |
          git clone --single-branch --branch main --depth 1 https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
-          # make it an orphan branch
+          # make it an orphan branch      
          cd docs.px4.io
          CURRENT_DATETIME=$(date +'%Y%m%d_%H_%M')
          git checkout --orphan "${CURRENT_DATETIME}_main"
@@ -3,9 +3,10 @@ name: EKF Change Indicator
 on:
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'

 jobs:
  unit_tests:
@@ -4,6 +4,7 @@ on:
  push:
    paths-ignore:
      - 'docs/**'
+      - '.github/**'

 jobs:
  unit_tests:
@@ -6,15 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -29,7 +27,7 @@ jobs:
          "failsafe_web",
        ]
    container:
-      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+      image: px4io/px4-dev:v1.16.0-ondemand
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
      - name: Install Node v20.18.0
@@ -11,11 +11,13 @@ on:
      - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+      - '*'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'

 env:
  MIN_FLASH_POS_DIFF_FOR_COMMENT: 50
@@ -26,7 +28,7 @@ jobs:
    name: Analyzing ${{ matrix.target }}
    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
-      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+      image: px4io/px4-dev:v1.16.0-ondemand
    strategy:
      matrix:
        target: [px4_fmu-v5x, px4_fmu-v6x]
@@ -9,22 +9,20 @@ on:
      - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+      - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  check_itcm:
    name: Checking ${{ matrix.target }}
    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
-      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+      image: px4io/px4-dev:v1.16.0-ondemand
    strategy:
      fail-fast: false
      matrix:
@@ -1,21 +0,0 @@
-# This workflow will triage pull requests and apply a label based on the
-# paths that are modified in the pull request.
-# The paths are set up in .github/labeler.yml
-#
-# See: https://github.com/actions/labeler
-
-name: Labeler
-on: [pull_request_target]
-
-jobs:
-  label:
-
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      pull-requests: write
-
-    steps:
-    - uses: actions/labeler@v5
-      with:
-        repo-token: "${{ secrets.GITHUB_TOKEN }}"
@@ -6,15 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -6,15 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -6,15 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -33,7 +31,7 @@ jobs:
    - name: Build PX4 and Run Test [${{ matrix.config }}]
      uses: addnab/docker-run-action@v3
      with:
-        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+        image: px4io/px4-dev:v1.16.0-ondemand
        options: -v ${{ github.workspace }}:/workspace
        run: |
          cd /workspace
@@ -6,11 +6,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'

 jobs:
  build:
@@ -11,15 +11,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -35,12 +33,6 @@ jobs:
    - name: Git Ownership Workaround
      run: git config --system --add safe.directory '*'

-    - name: Update ROS Keys
-      run: |
-        sudo rm /etc/apt/sources.list.d/ros2.list && \
-        sudo curl -sSL https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -o /usr/share/keyrings/ros-archive-keyring.gpg && \
-        echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/ros-archive-keyring.gpg] http://packages.ros.org/ros2/ubuntu $(. /etc/os-release && echo $UBUNTU_CODENAME) main" | sudo tee /etc/apt/sources.list.d/ros2.list > /dev/null
-
    - name: Install gazebo
      run: |
        apt update && apt install -y gazebo11 libgazebo11-dev gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libgstreamer-plugins-base1.0-dev
@@ -5,19 +5,16 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-      - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
 defaults:
  run:
    shell: bash
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 jobs:
  build_and_test:
    name: Build and test
@@ -11,15 +11,13 @@ on:
    - 'main'
    paths-ignore:
      - 'docs/**'
+      - '.github/**'
  pull_request:
    branches:
-    - '**'
+    - '*'
    paths-ignore:
      - 'docs/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+      - '.github/**'

 jobs:
  build:
@@ -6,11 +6,6 @@ CONFIG:
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_default
-    px4_sitl_spacecraft:
-      short: px4_sitl_spacecraft
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_spacecraft
    px4_sitl_nolockstep:
      short: px4_sitl_nolockstep
      buildType: RelWithDebInfo
@@ -306,11 +301,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: holybro_durandal-v1_default
-    holybro_kakuteh7-wing_default:
-      short: holybro_kakuteh7-wing
-      buildType: MinSizeRel
-      settings:
-        CONFIG: holybro_kakuteh7-wing_default
    holybro_kakuteh7dualimu_default:
      short: holybro_kakuteh7dualimu
      buildType: MinSizeRel
@@ -426,6 +426,7 @@ if(BUILD_TESTING)
 	set_target_properties(test_results PROPERTIES EXCLUDE_FROM_ALL TRUE)
 endif()

+
 #=============================================================================
 # subdirectories
 #
@@ -495,6 +496,7 @@ add_custom_target(uorb_graph DEPENDS ${uorb_graph_config})
 include(bloaty)


+include(doxygen)
 include(metadata)
 include(package)

@@ -365,7 +365,7 @@ coverity_scan: px4_sitl_default

 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata
+.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen

 parameters_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
@@ -381,6 +381,12 @@ extract_events:

 px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events

+doxygen:
+	@mkdir -p "$(SRC_DIR)"/build/doxygen
+	@cd "$(SRC_DIR)"/build/doxygen && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DBUILD_DOXYGEN=ON
+	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
+	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll
+
 # Style
 # --------------------------------------------------------------------
 .PHONY: check_format format check_newlines
@@ -410,18 +416,11 @@ tests:
 	$(eval UBSAN_OPTIONS += color=always)
 	$(call cmake-build,px4_sitl_test)

-# work around lcov bug #316; remove once lcov is fixed (see https://github.com/linux-test-project/lcov/issues/316)
-LCOBUG = --ignore-errors mismatch
 tests_coverage:
 	@$(MAKE) clean
 	@$(MAKE) --no-print-directory tests PX4_CMAKE_BUILD_TYPE=Coverage
 	@mkdir -p coverage
-	@lcov --directory build/px4_sitl_test \
-		--base-directory build/px4_sitl_test \
-		--gcov-tool gcov \
-		--capture \
-		$(LCOBUG) \
-		-o coverage/lcov.info
+	@lcov --directory build/px4_sitl_test --base-directory build/px4_sitl_test --gcov-tool gcov --capture -o coverage/lcov.info


 rostest: px4_sitl_default
@@ -216,33 +216,12 @@ foreach(board_extra_file ${OPTIONAL_BOARD_EXTRAS})
 		if(CONFIG_SYSTEMCMDS_BL_UPDATE)
 			# generate rc.board_bootloader_upgrade
 			set(BOARD_FIRMWARE_BIN "${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin")
-			message(STATUS "ROMFS:  Adding platforms/nuttx/init/rc.board_bootloader_upgrade -> /etc/init.d/rc.board_bootloader_upgrade")
-
-			# Generate the file using configure_file at configure time to a temporary location
-			set(bootloader_upgrade_tmp ${CMAKE_CURRENT_BINARY_DIR}/rc.board_bootloader_upgrade.tmp)
-			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${bootloader_upgrade_tmp} @ONLY)
-
-			# Then copy it at build time with proper dependencies
-			add_custom_command(
-				OUTPUT
-					${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade
-					rc.board_bootloader_upgrade.stamp
-				COMMAND ${CMAKE_COMMAND} -E copy_if_different ${bootloader_upgrade_tmp} ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade
-				COMMAND ${CMAKE_COMMAND} -E touch rc.board_bootloader_upgrade.stamp
-				DEPENDS
-					${bootloader_upgrade_tmp}
-					${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in
-					romfs_copy.stamp
-				COMMENT "ROMFS: copying rc.board_bootloader_upgrade"
-			)
-
-			list(APPEND extras_dependencies
-				rc.board_bootloader_upgrade.stamp
-			)
+			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade @ONLY)
 		else()
 			# remove bootloader from extras
 			list(REMOVE_ITEM OPTIONAL_BOARD_EXTRAS ${board_extra_file})
 		endif()
+
 	endif()
 endforeach()

@@ -46,22 +46,3 @@ param set-default PWM_MAIN_FUNC3 203
 param set-default PWM_MAIN_FUNC4 101

 param set-default EKF2_GPS_DELAY 0
-
-# Rate controllers
-param set-default FW_RR_P 0.0500
-param set-default FW_RR_I 2.0000
-param set-default FW_RR_D 0.0000
-param set-default FW_RR_FF 0.0000
-param set-default FW_RR_IMAX 1.0000
-
-param set-default FW_PR_P 0.0800
-param set-default FW_PR_I 2.5000
-param set-default FW_PR_D 0.0000
-param set-default FW_PR_FF 0.0000
-param set-default FW_PR_IMAX 1.0000
-
-param set-default FW_YR_P 0.0500
-param set-default FW_YR_I 3.0000
-param set-default FW_YR_D 0.0000
-param set-default FW_YR_FF 0.0000
-param set-default FW_YR_IMAX 1.0000
@@ -15,6 +15,7 @@ param set-default NAV_ACC_RAD 0.5

 # Differential Parameters
 param set-default RD_WHEEL_TRACK 0.3
+param set-default RD_MAX_THR_YAW_R 1.5
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533

@@ -30,16 +31,14 @@ param set-default RO_YAW_RATE_P 0.25
 param set-default RO_YAW_RATE_LIM 180
 param set-default RO_YAW_ACCEL_LIM 120
 param set-default RO_YAW_DECEL_LIM 1000
-param set-default RO_YAW_RATE_CORR 1.43

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5

-# Rover Velocity Control Parameters
+# Rover Position Control Parameters
 param set-default RO_SPEED_LIM 2
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
-param set-default RO_SPEED_RED 1

 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1
@@ -1,68 +1,51 @@
 #!/bin/sh
-# @name Gazebo - Zero Turn Lawnmower
+# @name Gazebo lawnmower
 # @type Rover
 # @class Rover

 . ${R}etc/init.d/rc.rover_differential_defaults

 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=lawn}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=lawnmower}

 param set-default SIM_GZ_EN 1 # Gazebo bridge

-param set-default NAV_ACC_RAD 0.5
-
 # We can arm and drive in manual mode when it slides and GPS check fails:
 param set-default COM_ARM_WO_GPS 1

-# Differential Parameters
+# Rover parameters
 param set-default RD_WHEEL_TRACK 0.9
+param set-default RD_YAW_RATE_I 0.1
+param set-default RD_YAW_RATE_P 5
+param set-default RD_MAX_ACCEL 1
+param set-default RD_MAX_JERK 3
+param set-default RD_MAX_SPEED 8
+param set-default RD_YAW_P 5
+param set-default RD_YAW_I 0.1
+param set-default RD_MAX_YAW_RATE 30
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533

-# Rover Control Parameters
-param set-default RO_ACCEL_LIM 1.5
-param set-default RO_DECEL_LIM 5
-param set-default RO_JERK_LIM 15
-param set-default RO_MAX_THR_SPEED 2.7
-
-# Rover Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.2
-param set-default RO_YAW_RATE_P 1.0
-param set-default RO_YAW_RATE_LIM 60
-param set-default RO_YAW_ACCEL_LIM 50
-param set-default RO_YAW_DECEL_LIM 1000
-param set-default RO_YAW_RATE_CORR 1.0
-
-# Rover Attitude Control Parameters
-param set-default RO_YAW_P 5
-
-# Rover Velocity Control Parameters
-param set-default RO_SPEED_LIM 2.1
-param set-default RO_SPEED_I 0.01
-param set-default RO_SPEED_P 0.1
-param set-defatul RO_SPEED_RED 1.0
-
 # Pure pursuit parameters
+param set-default PP_LOOKAHD_MAX 30
+param set-default PP_LOOKAHD_MIN 2
 param set-default PP_LOOKAHD_GAIN 1
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1

 # Actuator mapping - set SITL motors/servos output parameters:

 # "Motors" - motor channels 0 (Right) and 1 (Left) - via Wheels GZ bridge:
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 87
-param set-default SIM_GZ_WH_MAX1 113
-param set-default SIM_GZ_WH_DIS1 100
-param set-default SIM_GZ_WH_FAIL1 100
+#param set-default SIM_GZ_WH_MIN1 0
+#param set-default SIM_GZ_WH_MAX1 200
+#param set-default SIM_GZ_WH_DIS1 100
+#param set-default SIM_GZ_WH_FAIL1 100

 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 87
-param set-default SIM_GZ_WH_MAX2 113
-param set-default SIM_GZ_WH_DIS2 100
-param set-default SIM_GZ_WH_FAIL2 100
+#param set-default SIM_GZ_WH_MIN2 0
+#param set-default SIM_GZ_WH_MAX2 200
+#param set-default SIM_GZ_WH_DIS2 100
+#param set-default SIM_GZ_WH_FAIL2 100

 param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels

@@ -30,16 +30,14 @@ param set-default RO_MAX_THR_SPEED 3.1
 param set-default RO_YAW_RATE_I 0.1
 param set-default RO_YAW_RATE_P 1
 param set-default RO_YAW_RATE_LIM 180
-param set-default RO_YAW_RATE_CORR 1

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 3

-# Rover Velocity Control Parameters
+# Rover Position Control Parameters
 param set-default RO_SPEED_LIM 3
 param set-default RO_SPEED_I 0.1
 param set-default RO_SPEED_P 1
-param set-default RO_SPEED_RED 1

 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1
@@ -15,6 +15,8 @@ param set-default NAV_ACC_RAD 0.5

 # Mecanum Parameters
 param set-default RM_WHEEL_TRACK 0.3
+param set-default RM_MAX_THR_YAW_R 1.2
+param set-default RM_MISS_SPD_GAIN 1

 # Rover Control Parameters
 param set-default RO_ACCEL_LIM 3
@@ -28,16 +30,14 @@ param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 120
 param set-default RO_YAW_ACCEL_LIM 240
 param set-default RO_YAW_DECEL_LIM 1000
-param set-default RO_YAW_RATE_CORR 1.75

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5

-# Rover Velocity Control Parameters
+# Rover Position Control Parameters
 param set-default RO_SPEED_LIM 2
 param set-default RO_SPEED_I 0.5
 param set-default RO_SPEED_P 1
-param set-default RO_SPEED_RED 1

 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 0.5
@@ -1,56 +0,0 @@
-#!/bin/sh
-# @name Generic Differential Rover
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_differential}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-param set-default NAV_ACC_RAD 0.5
-
-# Differential Parameters
-param set-default RD_WHEEL_TRACK 0.6
-param set-default RD_TRANS_DRV_TRN 0.785398
-param set-default RD_TRANS_TRN_DRV 0.174533
-
-# Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.01
-param set-default RO_YAW_RATE_P 0.25
-param set-default RO_YAW_RATE_LIM 250
-param set-default RO_YAW_ACCEL_LIM 400
-param set-default RO_YAW_DECEL_LIM 800
-param set-default RO_YAW_RATE_CORR 1
-
-# Attitude Control Parameters
-param set-default RO_YAW_P 5
-
-# Velocity Control Parameters
-param set-default RO_ACCEL_LIM 4
-param set-default RO_DECEL_LIM 6
-param set-default RO_JERK_LIM 10
-param set-default RO_MAX_THR_SPEED 2
-param set-default RO_SPEED_LIM 1.8
-param set-default RO_SPEED_I 0.01
-param set-default RO_SPEED_P 0.01
-param set-default RO_SPEED_RED 1
-
-# Pure Pursuit parameters
-param set-default PP_LOOKAHD_GAIN 1
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-
-# Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 80
-param set-default SIM_GZ_WH_MAX1 120
-param set-default SIM_GZ_WH_DIS1 100
-
-param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 80
-param set-default SIM_GZ_WH_MAX2 120
-param set-default SIM_GZ_WH_DIS2 100
@@ -0,0 +1,155 @@
+#!/bin/sh
+#
+# @name 6DoF Spacecraft Model
+#
+# @type Freeflyer with 8 thrusters
+#
+# @maintainer Pedro Roque <padr@kth.se>
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+param set-default CA_AIRFRAME 15
+param set-default MAV_TYPE 99
+
+param set-default CA_THRUSTER_CNT 12
+param set-default CA_R_REV 0
+
+# param set-default FW_ARSP_MODE 1
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+param set-default COM_POSCTL_NAVL 2
+
+# Set thrusters
+param set-default CA_THRUSTER0_PX -0.50
+param set-default CA_THRUSTER0_PY 0.50
+param set-default CA_THRUSTER0_PZ 0.0
+param set-default CA_THRUSTER0_CT 0.237
+param set-default CA_THRUSTER0_AX 0.0
+param set-default CA_THRUSTER0_AY -1.0
+param set-default CA_THRUSTER0_AZ 0.0
+
+param set-default CA_THRUSTER1_PX 0.50
+param set-default CA_THRUSTER1_PY 0.50
+param set-default CA_THRUSTER1_PZ 0.0
+param set-default CA_THRUSTER1_CT 0.237
+param set-default CA_THRUSTER1_AX 0.0
+param set-default CA_THRUSTER1_AY -1.0
+param set-default CA_THRUSTER1_AZ 0.0
+
+param set-default CA_THRUSTER2_PX 0.50
+param set-default CA_THRUSTER2_PY -0.50
+param set-default CA_THRUSTER2_PZ 0.0
+param set-default CA_THRUSTER2_CT 0.237
+param set-default CA_THRUSTER2_AX 0.0
+param set-default CA_THRUSTER2_AY 1.0
+param set-default CA_THRUSTER2_AZ 0.0
+
+param set-default CA_THRUSTER3_PX -0.50
+param set-default CA_THRUSTER3_PY -0.50
+param set-default CA_THRUSTER3_PZ 0.0
+param set-default CA_THRUSTER3_CT 0.237
+param set-default CA_THRUSTER3_AX 0.0
+param set-default CA_THRUSTER3_AY 1.0
+param set-default CA_THRUSTER3_AZ 0.0
+
+param set-default CA_THRUSTER4_PX -0.50
+param set-default CA_THRUSTER4_PY 0.0
+param set-default CA_THRUSTER4_PZ -0.50
+param set-default CA_THRUSTER4_CT 0.237
+param set-default CA_THRUSTER4_AX 1.0
+param set-default CA_THRUSTER4_AY 0.0
+param set-default CA_THRUSTER4_AZ 0.0
+
+param set-default CA_THRUSTER5_PX 0.50
+param set-default CA_THRUSTER5_PY 0.0
+param set-default CA_THRUSTER5_PZ -0.50
+param set-default CA_THRUSTER5_CT 0.237
+param set-default CA_THRUSTER5_AX -1.0
+param set-default CA_THRUSTER5_AY 0.0
+param set-default CA_THRUSTER5_AZ 0.0
+
+param set-default CA_THRUSTER6_PX 0.50
+param set-default CA_THRUSTER6_PY 0.0
+param set-default CA_THRUSTER6_PZ 0.50
+param set-default CA_THRUSTER6_CT 0.237
+param set-default CA_THRUSTER6_AX -1.0
+param set-default CA_THRUSTER6_AY 0.0
+param set-default CA_THRUSTER6_AZ 0.0
+
+param set-default CA_THRUSTER7_PX -0.50
+param set-default CA_THRUSTER7_PY 0.0
+param set-default CA_THRUSTER7_PZ 0.50
+param set-default CA_THRUSTER7_CT 0.237
+param set-default CA_THRUSTER7_AX 1.0
+param set-default CA_THRUSTER7_AY 0.0
+param set-default CA_THRUSTER7_AZ 0.0
+
+param set-default CA_THRUSTER8_PX 0.0
+param set-default CA_THRUSTER8_PY -0.50
+param set-default CA_THRUSTER8_PZ -0.50
+param set-default CA_THRUSTER8_CT 0.237
+param set-default CA_THRUSTER8_AX 0.0
+param set-default CA_THRUSTER8_AY 0.0
+param set-default CA_THRUSTER8_AZ 1.0
+
+param set-default CA_THRUSTER9_PX 0.0
+param set-default CA_THRUSTER9_PY 0.50
+param set-default CA_THRUSTER9_PZ -0.50
+param set-default CA_THRUSTER9_CT 0.237
+param set-default CA_THRUSTER9_AX 0.0
+param set-default CA_THRUSTER9_AY 0.0
+param set-default CA_THRUSTER9_AZ 1.0
+
+param set-default CA_THRUSTER10_PX 0.0
+param set-default CA_THRUSTER10_PY 0.50
+param set-default CA_THRUSTER10_PZ 0.50
+param set-default CA_THRUSTER10_CT 0.237
+param set-default CA_THRUSTER10_AX 0.0
+param set-default CA_THRUSTER10_AY 0.0
+param set-default CA_THRUSTER10_AZ -1.0
+
+param set-default CA_THRUSTER11_PX 0.0
+param set-default CA_THRUSTER11_PY -0.50
+param set-default CA_THRUSTER11_PZ 0.50
+param set-default CA_THRUSTER11_CT 0.237
+param set-default CA_THRUSTER11_AX 0.0
+param set-default CA_THRUSTER11_AY 0.0
+param set-default CA_THRUSTER11_AZ -1.0
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+param set-default PWM_MAIN_FUNC9 109
+param set-default PWM_MAIN_FUNC10 110
+param set-default PWM_MAIN_FUNC11 111
+param set-default PWM_MAIN_FUNC12 112
+
+# PWM Simulation
+param set PWM_SIM_PWM_MAX 10000
+param set PWM_SIM_PWM_MIN 0
+
+# Controller Tunings
+param set-default SC_ROLLRATE_P 0.14
+param set-default SC_PITCHRATE_P 0.14
+param set-default SC_ROLLRATE_I 0.3
+param set-default SC_PITCHRATE_I 0.3
+param set-default SC_ROLLRATE_D 0.004
+param set-default SC_PITCHRATE_D 0.004
@@ -20,7 +20,7 @@ param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
 param set-default FD_ESCS_EN 0 # We don't have ESCs - but maybe we need this later?

 param set-default CA_AIRFRAME 14
-param set-default MAV_TYPE 45
+param set-default MAV_TYPE 99

 param set-default CA_THRUSTER_CNT 8
 param set-default CA_R_REV 0
@@ -114,8 +114,7 @@ px4_add_romfs_files(
 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2

-	50000_gz_rover_differential
-
+	71001_gazebo-classic_spacecraft_dart
 	71002_gz_spacecraft_2d

 	# [22000, 22999] Reserve for custom models
@@ -5,5 +5,8 @@
 # @type Rover
 # @class Rover
 #
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#

 . ${R}etc/init.d/rc.rover_differential_defaults
@@ -7,6 +7,9 @@
 # @type Rover
 # @class Rover
 #
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#

 . ${R}etc/init.d/rc.rover_differential_defaults

@@ -23,6 +26,7 @@ param set-default NAV_ACC_RAD 0.5

 # Differential Parameters
 param set-default RD_WHEEL_TRACK 0.3
+param set-default RD_MAX_THR_YAW_R 0.7
 param set-default RD_TRANS_DRV_TRN 0.785398
 param set-default RD_TRANS_TRN_DRV 0.139626

@@ -38,16 +42,14 @@ param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 250
 param set-default RO_YAW_ACCEL_LIM 600
 param set-default RO_YAW_DECEL_LIM 600
-param set-default RO_YAW_RATE_CORR 2.7

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 2.5

-# Rover Velocity Control Parameters
+# Rover Position Control Parameters
 param set-default RO_SPEED_LIM 1.6
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
-param set-default RO_SPEED_RED 1

 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1
@@ -5,5 +5,8 @@
 # @type Rover
 # @class Rover
 #
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#

 . ${R}etc/init.d/rc.rover_ackermann_defaults
@@ -7,6 +7,9 @@
 # @type Rover
 # @class Rover
 #
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#

 . ${R}etc/init.d/rc.rover_ackermann_defaults

@@ -30,16 +33,14 @@ param set-default RO_MAX_THR_SPEED 2.8
 param set-default RO_YAW_RATE_I 0.1
 param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 120
-param set-default RO_YAW_RATE_CORR 1

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 2.5

-# Rover Velocity Control Parameters
+# Rover Position Control Parameters
 param set-default RO_SPEED_LIM 2.5
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
-param set-default RO_SPEED_RED 1

 # Pure pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1
@@ -5,5 +5,8 @@
 # @type Rover
 # @class Rover
 #
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#

 . ${R}etc/init.d/rc.rover_mecanum_defaults
@@ -11,7 +11,7 @@
 . ${R}etc/init.d/rc.sc_defaults

 param set-default CA_AIRFRAME 14
-param set-default MAV_TYPE 45
+param set-default MAV_TYPE 99

 param set-default CA_THRUSTER_CNT 8
 param set-default CA_R_REV 0
@@ -13,7 +13,6 @@ control_allocator start
 #
 # Start attitude controller.
 #
-fw_dyn_soar_control start
 fw_rate_control start
 fw_att_control start
 fw_mode_manager start
@@ -3,10 +3,10 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #

-set VEHICLE_TYPE spacecraft
+set VEHICLE_TYPE sc

-# MAV_TYPE_SPACECRAFT_ORBITTER
-param set-default MAV_TYPE 45
+# MAV_TYPE_QUADROTOR 2
+#param set-default MAV_TYPE 12

 # Set micro-dds-client to use ethernet and IP-address 192.168.0.1
 param set-default UXRCE_DDS_AG_IP -1062731775
@@ -234,7 +234,6 @@ then
 		lis3mdl -X -q -a 0x1c start
 	fi
 	qmc5883l -X -q start
-	qmc5883p -X -q start
 	rm3100 -X -q start

 	# start last (wait for possible icm20948 passthrough mode)
@@ -68,15 +68,6 @@ then
 	. ${R}etc/init.d/rc.vtol_apps
 fi

-#
-# Spapcecraft setup.
-#
-if [ $VEHICLE_TYPE = spacecraft ]
-then
-	# Start standard multicopter apps.
-	. ${R}etc/init.d/rc.sc_apps
-fi
-
 #
 # Airship setup.
 #
@@ -224,7 +224,7 @@ else
 		# Look for airframe in ROMFS
 		. ${R}etc/init.d/rc.autostart

-		if [ ${VEHICLE_TYPE} = none ]
+		if [ ${VEHICLE_TYPE} == none ]
 		then
 			# Use external startup file
 			if [ $STORAGE_AVAILABLE = yes ]
@@ -235,7 +235,7 @@ else
 			fi
 		fi

-		if [ ${VEHICLE_TYPE} = none ]
+		if [ ${VEHICLE_TYPE} == none ]
 		then
 			echo "ERROR [init] No airframe file found for SYS_AUTOSTART value"
 			param set SYS_AUTOSTART 0
@@ -280,14 +280,6 @@ else
 	#
 	send_event start

-	#
-	# Start the hardfault streamer.
-	#
-	if param compare -s SYS_HF_MAV 1
-	then
-		hardfault_stream start
-	fi
-
 	#
 	# Start the resource load monitor.
 	#
@@ -3,14 +3,14 @@
 return_value=0

 # Check if there are files checked in that don't end in a newline (POSIX requirement)
-git grep --cached -Il '' -- ':!docs/public/' ':!docs/ko/' ':!docs/uk/' ':!docs/zh/' | xargs -L1 bash -c 'if test "$(tail -c 1 "$0")"; then echo "No new line at end of $0"; exit 1; fi'
+git grep --cached -Il '' -- ':!docs/*' | xargs -L1 bash -c 'if test "$(tail -c 1 "$0")"; then echo "No new line at end of $0"; exit 1; fi'

 if [ $? -ne 0 ]; then
 	return_value=1
 fi

 # Check if there are files checked in that have duplicate newlines at the end (fail trailing whitespace checks)
-git grep --cached -Il '' -- ':!docs/public/' ':!docs/ko/' ':!docs/uk/' ':!docs/zh/' | xargs -L1 bash -c 'if tail -c 2 "$0" | ( read x && read y && [ x"$x" = x ] && [ x"$y" = x ]); then echo "Multiple newlines at the end of $0"; exit 1; fi'
+git grep --cached -Il '' -- ':!docs/*' | xargs -L1 bash -c 'if tail -c 2 "$0" | ( read x && read y && [ x"$x" = x ] && [ x"$y" = x ]); then echo "Multiple newlines at the end of $0"; exit 1; fi'

 if [ $? -ne 0 ]; then
 	return_value=1
@@ -35,7 +35,6 @@ if args.filter:
    for board in args.filter.split(','):
        board_filter.append(board)

-default_container = 'ghcr.io/px4/px4-dev:v1.16.0-rc1-258-g0369abd556'
 build_configs = []
 grouped_targets = {}
 excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
@@ -87,7 +86,7 @@ def process_target(px4board_file, target_name):
    assert platform, f"PLATFORM not found in {px4board_file}"

    if platform not in excluded_platforms:
-        container = default_container
+        container = 'ghcr.io/px4/px4-dev:v1.16.0-ondemand'
        if platform == 'posix':
            group = 'base'
            if toolchain:
@@ -121,7 +120,7 @@ if(verbose):
 # - Events
 metadata_targets = ['airframe_metadata', 'parameters_metadata', 'extract_events']
 grouped_targets['base'] = {}
-grouped_targets['base']['container'] = default_container
+grouped_targets['base']['container'] = 'ghcr.io/px4/px4-dev:v1.16.0-ondemand'
 grouped_targets['base']['manufacturers'] = {}
 grouped_targets['base']['manufacturers']['px4'] = []
 grouped_targets['base']['manufacturers']['px4'] += metadata_targets
@@ -15,7 +15,7 @@ fi

 # otherwise default to nuttx
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev:v1.16.0-rc1-258-g0369abd556"
+	PX4_DOCKER_REPO="px4io/px4-dev:v1.16.0-ondemand"
 fi

 echo "PX4_DOCKER_REPO: $PX4_DOCKER_REPO";
@@ -5,7 +5,7 @@
 set SERIAL_DEV none
 {% for serial_device in serial_devices -%}
 if param compare "$PRT" {{ serial_device.index }}; then
-	if [ "$PRT_{{ serial_device.tag }}_" = "" ]; then
+	if [ "x$PRT_{{ serial_device.tag }}_" = "x" ]; then
 		set SERIAL_DEV {{ serial_device.device }}
 		set BAUD_PARAM SER_{{ serial_device.tag }}_BAUD
 		set PRT_{{ serial_device.tag }}_ 1
@@ -27,4 +27,3 @@ six>=1.12.0
 toml>=0.9
 sympy>=1.10.1
 pycryptodome
-lark
@@ -62,7 +62,6 @@ CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
@@ -0,0 +1,56 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_BOARD_EXTERNAL_METADATA=y
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_BATT_SMBUS=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_AUAV=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_COMMON_HYGROMETERS=y
+CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
+CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IRLOCK=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_COMMON_OSD=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_UAVCANNODE_ARMING_STATUS=y
+CONFIG_UAVCANNODE_BEEP_COMMAND=y
+CONFIG_UAVCANNODE_ESC_RAW_COMMAND=y
+CONFIG_UAVCANNODE_ESC_STATUS=y
+CONFIG_UAVCANNODE_FLOW_MEASUREMENT=y
+CONFIG_UAVCANNODE_GNSS_FIX=y
+CONFIG_UAVCANNODE_HYGROMETER_MEASUREMENT=y
+CONFIG_UAVCANNODE_LIGHTS_COMMAND=y
+CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH=y
+CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT=y
+CONFIG_UAVCANNODE_RAW_AIR_DATA=y
+CONFIG_UAVCANNODE_RAW_IMU=y
+CONFIG_UAVCANNODE_RTK_DATA=y
+CONFIG_UAVCANNODE_SERVO_ARRAY_COMMAND=y
+CONFIG_UAVCANNODE_STATIC_PRESSURE=y
+CONFIG_UAVCANNODE_STATIC_TEMPERATURE=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -0,0 +1,13 @@
+{
+    "board_id": 83,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the ARK CANnode board",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKCANNODE",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}
@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default MBE_ENABLE 0
+param set-default SENS_IMU_CLPNOTI 0
+param set-default SENS_EN_AUAVX 1
+
+pwm_out start
+
+dshot start
@@ -0,0 +1,123 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+icm42688p -R 0 -s start
+
+if param compare -s SENS_EN_BATT 1
+then
+	batt_smbus start -X
+fi
+
+# Lidar-Lite on I2C
+if param compare -s SENS_EN_LL40LS 2
+then
+	ll40ls start -X
+fi
+
+# mappydot lidar sensor
+if param compare -s SENS_EN_MPDT 1
+then
+	mappydot start -X
+fi
+
+# mb12xx sonar sensor
+if param greater -s SENS_EN_MB12XX 0
+then
+	mb12xx start -X
+fi
+
+# Lightware i2c lidar sensor
+if param greater -s SENS_EN_SF1XX 0
+then
+	lightware_laser_i2c start -X
+fi
+
+# vl53l1x i2c distance sensor
+if param compare -s SENS_EN_VL53L1X 1
+then
+	vl53l1x start -X
+fi
+
+# ADIS16448 spi external IMU
+if param compare -s SENS_EN_ADIS164X 1
+then
+	if param compare -s SENS_OR_ADIS164X 0
+	then
+		adis16448 -S start
+	fi
+	if param compare -s SENS_OR_ADIS164X 4
+	then
+		adis16448 -S start -R 4
+	fi
+fi
+
+# Eagle Tree airspeed sensor external I2C
+if param compare -s SENS_EN_ETSASPD 1
+then
+	ets_airspeed start -X
+fi
+
+# Sensirion SDP3X differential pressure sensor external I2C
+if param compare -s SENS_EN_SDP3X 1
+then
+	if ! sdp3x start -X
+	then
+		# try another common address
+		sdp3x start -X -a 0x22
+	fi
+fi
+
+# SHT3x temperature and hygrometer sensor, external I2C
+if param compare -s SENS_EN_SHT3X 1
+then
+	sht3x start -X
+	sht3x start -X -a 0x45
+fi
+
+# TE MS4525DO differential pressure sensor external I2C
+if param compare -s SENS_EN_MS4525DO 1
+then
+	ms4525do start -X
+fi
+
+# TE MS5525DSO differential pressure sensor external I2C
+if param compare -s SENS_EN_MS5525DS 1
+then
+	ms5525dso start -X
+fi
+
+# IR-LOCK sensor external I2C
+if param compare -s SENS_EN_IRLOCK 1
+then
+	irlock start -X
+fi
+
+# SPL06 sensor external I2C
+if param compare -s SENS_EN_SPL06 1
+then
+	spl06 -X start
+	spl06 -X -a 0x77 start
+fi
+
+# AUAV absolute/differential pressure sensor external I2C
+if param greater -s SENS_EN_AUAVX 0
+then
+	auav start -D -X
+	auav start -A -X
+fi
+
+# probe for optional external I2C devices
+icm20948_i2c_passthrough -X -q start
+
+# compasses
+hmc5883 -T -X -q start
+ist8308 -X -q start
+ist8310 -X -q start
+iis2mdc -X -q start
+lis3mdl -X -q start
+qmc5883l -X -q start
+rm3100 -X -q start
+
+# start last (wait for possible icm20948 passthrough mode)
+ak09916 -X -q start
@@ -0,0 +1,56 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/auterion/cannode/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,149 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - 8  MHz Crystal
+ * LSE - not installed
+ */
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART1_RX	GPIO_USART1_RX_2
+#define GPIO_USART1_TX	GPIO_USART1_TX_3
+
+#define GPIO_USART2_RX	GPIO_USART2_RX_1
+#define GPIO_USART2_TX	GPIO_USART2_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
+
+/* SPI */
+#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
+
+#define GPIO_SPI2_MISO  GPIO_SPI2_MISO_1 /* PB14 */
+#define GPIO_SPI2_MOSI  GPIO_SPI2_MOSI_1 /* PB15 */
+#define GPIO_SPI2_SCK   GPIO_SPI2_SCK_2  /* PB13 */
+
+/* I2C */
+#define GPIO_MCU_I2C1_SCL
+#define GPIO_MCU_I2C1_SDA
+
+#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1
+#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_2
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#endif /* __ARCH_BOARD_BOARD_H */
@@ -1,6 +1,6 @@
 /****************************************************************************
 *
- *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -31,59 +31,20 @@
 *
 ****************************************************************************/

-#include "QMC5883P.hpp"
+#pragma once

-#include <px4_platform_common/getopt.h>
-#include <px4_platform_common/module.h>
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX   // DMA1, Stream 3, Channel 0
+#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX   // DMA1, Stream 4, Channel 0

-void QMC5883P::print_usage()
-{
-	PRINT_MODULE_USAGE_NAME("qmc5883p", "driver");
-	PRINT_MODULE_USAGE_SUBCATEGORY("magnetometer");
-	PRINT_MODULE_USAGE_COMMAND("start");
-	PRINT_MODULE_USAGE_PARAMS_I2C_SPI_DRIVER(true, false);
-	PRINT_MODULE_USAGE_PARAMS_I2C_ADDRESS(0x2C);
-	PRINT_MODULE_USAGE_PARAM_INT('R', 0, 0, 35, "Rotation", true);
-	PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
-}
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_2   // DMA2, Stream 2, Channel 3
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_2   // DMA2, Stream 5, Channel 3

-extern "C" int qmc5883p_main(int argc, char *argv[])
-{
-	int ch;
-	using ThisDriver = QMC5883P;
-	BusCLIArguments cli{true, false};
-	cli.default_i2c_frequency = I2C_SPEED;
-	cli.i2c_address = I2C_ADDRESS_DEFAULT;
+// Assigned in timer_config.cpp

-	while ((ch = cli.getOpt(argc, argv, "R:")) != EOF) {
-		switch (ch) {
-		case 'R':
-			cli.rotation = (enum Rotation)atoi(cli.optArg());
-			break;
-		}
-	}
-
-	const char *verb = cli.optArg();
-
-	if (!verb) {
-		ThisDriver::print_usage();
-		return -1;
-	}
-
-	BusInstanceIterator iterator(MODULE_NAME, cli, DRV_MAG_DEVTYPE_QMC5883P);
-
-	if (!strcmp(verb, "start")) {
-		return ThisDriver::module_start(cli, iterator);
-	}
-
-	if (!strcmp(verb, "stop")) {
-		return ThisDriver::module_stop(iterator);
-	}
-
-	if (!strcmp(verb, "status")) {
-		return ThisDriver::module_status(iterator);
-	}
-
-	ThisDriver::print_usage();
-	return -1;
-}
+// Timer 2                                    /* DMA1, Stream 7, Channel 3 DMAMAP_TIM2_UP_2 */
+// Timer 3                                    /* DMA1, Stream 2, Channel 5 DMAMAP_TIM3_UP   */
+// Timer 4                                    /* DMA1, Stream 6, Channel 2 DMAMAP_TIM4_UP   */
@@ -0,0 +1,153 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/auterion/cannode/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_VARS=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=254
+CONFIG_SCHED_HPWORKSTACKSIZE=3000
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI1_DMA=y
+CONFIG_STM32_SPI1_DMA_BUFFER=2048
+CONFIG_STM32_SPI2=y
+CONFIG_STM32_SPI2_DMA=y
+CONFIG_STM32_SPI2_DMA_BUFFER=2048
+CONFIG_STM32_USART1=y
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1100
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_SERIAL_CONSOLE=y
+CONFIG_USART2_TXBUFSIZE=1100
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,134 @@
+/****************************************************************************
+ * nuttx-config/scripts/canbootloader_script.ld
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
@@ -0,0 +1,146 @@
+/****************************************************************************
+ * scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412CG has 1Mb of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(8);
+		/*
+		* This section positions the app_descriptor_t used
+		* by the make_can_boot_descriptor.py tool to set
+		* the application image's descriptor so that the
+		* uavcan bootloader has the ability to validate the
+		* image crc, size etc
+		*/
+		KEEP(*(.app_descriptor))
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
@@ -31,16 +31,38 @@
 #
 ############################################################################

-px4_add_module(
-	MODULE drivers__magnetometer__qmc5883p
-	MAIN qmc5883p
-	COMPILE_FLAGS
-	SRCS
-		QMC5883P.cpp
-		QMC5883P.hpp
-		qmc5883p_main.cpp
-		QST_QMC5883P_registers.hpp
-	DEPENDS
-		drivers_magnetometer
-		px4_work_queue
+if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
+
+	add_library(drivers_board
+		boot_config.h
+		boot.c
+		led.c
+		led.h
 	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			canbootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
+
+else()
+	add_library(drivers_board
+		can.c
+		i2c.cpp
+		init.c
+		led.c
+		spi.cpp
+		timer_config.cpp
+	)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_spi
+			drivers__led # drv_led_start
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+	)
+endif()
@@ -0,0 +1,115 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * board internal definitions
+ */
+
+#pragma once
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/* CAN  Silent mode control */
+#define GPIO_CAN1_SILENT_S0   /* PC14  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN14)
+
+/* CAN termination software control */
+#define GPIO_CAN1_TERMINATION /* PC15 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN15)
+#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
+
+/* Boot config */
+#define GPIO_BOOT_CONFIG      /* PH1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTH|GPIO_PIN1|GPIO_EXTI)
+
+/* ICM42688p FSYNC */
+#define GPIO_42688P_FSYNC     /* PB8  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
+
+/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
+#define GPIO_TIM1_CH1         /* PA8  */  (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH2         /* PA9  */  (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH3         /* PA10 */  (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+
+/* PWM Outputs */
+#define BOARD_NUM_IO_TIMERS         3
+#define DIRECT_PWM_OUTPUT_CHANNELS  8
+
+#define GPIO_TIM2_CH1_RESET   /* PA0  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
+#define GPIO_TIM2_CH2_RESET   /* PA1  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_TIM2_CH3_RESET   /* PB10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_TIM3_CH1_RESET   /* PB4  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN4)
+#define GPIO_TIM3_CH2_RESET   /* PB5  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
+#define GPIO_TIM3_CH3_RESET   /* PB0  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
+#define GPIO_TIM3_CH4_RESET   /* PB1  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
+#define GPIO_TIM4_CH4_RESET   /* PB7  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)
+
+#define GPIO_I2C1_SCL_RESET   /* PB6  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
+#define GPIO_I2C1_SDA_RESET   /* PB9  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
+
+#define GPIO_USART1_RX_GPIO   /* PB3  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTB|GPIO_PIN3)
+#define GPIO_USART1_TX_GPIO   /* PA15  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN15)
+
+#define GPIO_USART2_RX_GPIO   /* PA3  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN3)
+#define GPIO_USART2_TX_GPIO   /* PA2  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN2)
+
+#define FLASH_BASED_PARAMS
+
+/* High-resolution timer */
+#define HRT_TIMER                    8  /* use timer 8 for the HRT */
+#define HRT_TIMER_CHANNEL            1  /* use capture/compare channel 1 */
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_CAN1_SILENT_S0,              \
+		GPIO_CAN1_TERMINATION,            \
+		GPIO_42688P_FSYNC,                \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_I2C1_SCL_RESET,              \
+		GPIO_I2C1_SDA_RESET,              \
+	}
+
+__BEGIN_DECLS
+
+#define BOARD_HAS_N_S_RGB_LED       1
+#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
+
+#ifndef __ASSEMBLY__
+
+extern void stm32_spiinitialize(void);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS
@@ -0,0 +1,188 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *       Author: Ben Dyer <ben_dyer@mac.com>
+ *               Pavel Kirienko <pavel.kirienko@zubax.com>
+ *               David Sidrane <david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_config.h>
+#include <stdint.h>
+#include "boot_config.h"
+#include "board.h"
+
+#include <debug.h>
+#include <string.h>
+#include <arch/board/board.h>
+
+#include <nuttx/board.h>
+#include "led.h"
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
+	stm32_configgpio(GPIO_CAN1_RX);
+	stm32_configgpio(GPIO_CAN1_TX);
+	stm32_configgpio(GPIO_CAN1_SILENT_S0);
+	stm32_configgpio(GPIO_CAN1_TERMINATION);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+
+#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
+	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
+#endif
+
+}
+
+/************************************************************************************
+ * Name: board_deinitialize
+ *
+ * Description:
+ *   This function is called by the bootloader code prior to booting
+ *   the application. Is should place the HW into an benign initialized state.
+ *
+ ************************************************************************************/
+
+void board_deinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+}
+
+/****************************************************************************
+ * Name: board_get_product_name
+ *
+ * Description:
+ *   Called to retrieve the product name. The returned value is a assumed
+ *   to be written to a pascal style string that will be length prefixed
+ *   and not null terminated
+ *
+ * Input Parameters:
+ *    product_name - A pointer to a buffer to write the name.
+ *    maxlen       - The maximum number of charter that can be written
+ *
+ * Returned Value:
+ *   The length of characters written to the buffer.
+ *
+ ****************************************************************************/
+
+uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
+{
+	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
+}
+
+/****************************************************************************
+ * Name: board_get_hardware_version
+ *
+ * Description:
+ *   Called to retrieve the hardware version information. The function
+ *   will first initialize the the callers struct to all zeros.
+ *
+ * Input Parameters:
+ *    hw_version - A pointer to a uavcan_hardwareversion_t.
+ *
+ * Returned Value:
+ *   Length of the unique_id
+ *
+ ****************************************************************************/
+
+size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
+{
+	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
+
+	hw_version->major = HW_VERSION_MAJOR;
+	hw_version->minor = HW_VERSION_MINOR;
+
+	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
+}
+
+/****************************************************************************
+ * Name: board_indicate
+ *
+ * Description:
+ *   Provides User feedback to indicate the state of the bootloader
+ *   on board specific  hardware.
+ *
+ * Input Parameters:
+ *    indication - A member of the uiindication_t
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
+
+typedef begin_packed_struct struct led_t {
+	uint8_t red;
+	uint8_t green;
+	uint8_t blue;
+	uint8_t hz;
+} end_packed_struct led_t;
+
+static const  led_t i2l[] = {
+
+	led(0, off,                             0,     0,     0,     0),
+	led(1, reset,                          128,   128,   128,   30),
+	led(2, autobaud_start,                  0,   128,     0,     1),
+	led(3, autobaud_end,                    0,   128,     0,     2),
+	led(4, allocation_start,                0,     0,    64,     2),
+	led(5, allocation_end,                  0,   128,    64,     3),
+	led(6, fw_update_start,                32,   128,    64,     3),
+	led(7, fw_update_erase_fail,           32,   128,    32,     3),
+	led(8, fw_update_invalid_response,     64,     0,     0,     1),
+	led(9, fw_update_timeout,              64,     0,     0,     2),
+	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
+	led(b, jump_to_app,                     0,   128,     0,    10),
+
+};
+
+void board_indicate(uiindication_t indication)
+{
+	rgb_led(i2l[indication].red,
+		i2l[indication].green,
+		i2l[indication].blue,
+		i2l[indication].hz);
+}
@@ -0,0 +1,134 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file boot_config.h
+ *
+ * bootloader definitions that configures the behavior and options
+ * of the Boot loader
+ * This file is relies on the parent folder's boot_config.h file and defines
+ * different usages of the hardware for bootloading
+ */
+
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+/* Bring in the board_config.h definitions
+ * todo:make this be pulled in from a targed's build
+ * files in nuttx*/
+
+#include "board_config.h"
+#include "uavcan.h"
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <stm32_flash.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
+
+//todo:wrap OPT_x in in ifdefs for command line definitions
+#define OPT_TBOOT_MS                    3000
+#define OPT_NODE_STATUS_RATE_MS         800
+#define OPT_NODE_INFO_RATE_MS           50
+#define OPT_BL_NUMBER_TIMERS            7
+
+/*
+ *  This Option set is set to 1 ensure a provider of firmware has an
+ *  opportunity update the node's firmware.
+ *  This Option is the default policy and can be overridden by
+ *  a jumper
+ *  When this Policy is set, the node will ignore tboot and
+ *  wait indefinitely for a GetNodeInfo request before booting.
+ *
+ *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
+ *  the polarity of the jumper to be True Active
+ *
+ *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
+ *                                                 Jumper
+ *   yes           1                       0         x
+ *   yes           1                       1       Active
+ *   no            1                       1       Not Active
+ *   no            0                       0         X
+ *   yes           0                       1       Active
+ *   no            0                       1       Not Active
+ *
+ */
+#define OPT_WAIT_FOR_GETNODEINFO                    0
+/* The ARK CANnode uses PH1 for GPIO_BOOT_CONFIG but it is not
+ * compatible with px4_arch_gpioread as Port H = 7 which is greater
+ * than STM32_NPORTS
+ * #define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        0
+ */
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 1
+
+#define OPT_ENABLE_WD           1
+
+#define OPT_RESTART_TIMEOUT_MS          20000
+
+/* Reserved for the Booloader */
+#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
+
+/* Reserved for the application out of the total
+ * system flash minus the BOOTLOADER_SIZE_IN_K
+ */
+#define OPT_APPLICATION_RESERVER_IN_K    0
+
+#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
+#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
+
+
+#define FLASH_BASE              STM32_FLASH_BASE
+#define FLASH_SIZE              STM32_FLASH_SIZE
+
+#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
+#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
+#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
+
+/* If this board uses big flash that have large sectors */
+
+#define OPT_USE_YIELD
+
+/* Bootloader Option*****************************************************************
+ *
+ */
+#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)
@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+
+#endif
@@ -1,6 +1,6 @@
 /****************************************************************************
 *
- *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -31,13 +31,8 @@
 *
 ****************************************************************************/

-/**
- * Control PWM output voltage
- *
- * @value 0 3.3V
- * @value 1 5.0V
- *
- * @reboot_required true
- * @group PWM Outputs
- */
-PARAM_DEFINE_INT32(PWM_VOLT_SEL, 0);
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(1),
+};
@@ -0,0 +1,186 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * board specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+#include <px4_platform_common/px4_config.h>
+#include <px4_platform_common/tasks.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+#include <syslog.h>
+
+#include <nuttx/board.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include "led.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <drivers/drv_watchdog.h>
+
+#include <systemlib/px4_macros.h>
+
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+
+#include <px4_arch/io_timer.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+/************************************************************************************
+ * Name: board_on_reset
+ *
+ * Description:
+ * Optionally provided function called on entry to board_system_reset
+ * It should perform any house keeping prior to the rest.
+ *
+ * status - 1 if resetting to boot loader
+ *          0 if just resetting
+ *
+ ************************************************************************************/
+__EXPORT void board_on_reset(int status)
+{
+	// Configure the GPIO pins to outputs and keep them low.
+	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
+		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
+	}
+
+	/*
+	 * On resets invoked from system (not boot) insure we establish a low
+	 * output state (discharge the pins) on PWM pins before they become inputs.
+	 */
+
+	if (status >= 0) {
+		up_mdelay(400);
+	}
+}
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	// Reset all PWM to Low outputs.
+	board_on_reset(-1);
+
+	watchdog_init();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	// Configure SPI all interfaces GPIO & enable power.
+	stm32_spiinitialize();
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	px4_platform_init();
+
+#if defined(SERIAL_HAVE_RXDMA)
+	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#endif
+
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{2, 16 * 1024, 0x08008000},
+		{3, 16 * 1024, 0x0800C000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+	}
+
+#endif // FLASH_BASED_PARAMS
+
+	/* Configure the HW based on the manifest */
+	//px4_platform_configure();
+
+	return OK;
+}
@@ -0,0 +1,124 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "led.h"
+
+#define TMR_BASE        STM32_TIM1_BASE
+#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
+#define TMR_REG(o)      (TMR_BASE+(o))
+
+void rgb_led(int r, int g, int b, int freqs)
+{
+
+	long fosc = TMR_FREQUENCY;
+	long prescale = 2048;
+	long p1s = fosc / prescale;
+	long p0p5s  = p1s / 2;
+	uint16_t val;
+	static bool once = 0;
+
+	if (!once) {
+		once = 1;
+
+		/* Enable Clock to Block */
+		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
+
+		/* Reload */
+
+		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
+		val |= ATIM_EGR_UG;
+		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
+
+		/* Set Prescaler STM32_TIM_SETCLOCK */
+
+		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
+
+		/* Enable STM32_TIM_SETMODE*/
+
+		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
+			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
+		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
+			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
+			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
+
+
+		stm32_configgpio(GPIO_TIM1_CH1);
+		stm32_configgpio(GPIO_TIM1_CH2);
+		stm32_configgpio(GPIO_TIM1_CH3);
+
+		/* master output enable = on */
+		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
+	}
+
+	long p  = freqs == 0 ? p1s : p1s / freqs;
+	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
+
+	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
+
+	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
+	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
+	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
+
+	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+	if (freqs == 0) {
+		val &= ~ATIM_CR1_CEN;
+
+	} else {
+		val |= ATIM_CR1_CEN;
+	}
+
+	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+}
@@ -1,6 +1,7 @@
 /****************************************************************************
 *
- *   Copyright (c) 2013-2025 PX4 Development Team. All rights reserved.
+ *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
+ *   Author: David Sidrane<david_s5@nscdg.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -31,14 +32,6 @@
 *
 ****************************************************************************/

-/**
- * Enable FMU SD card hardfault streaming
- *
- * When this is enabled all the hardfaults on the SD card are streamed
- * over MAVLink. This is useful for cases where the FMU does reset in-flight due
- * to a hardfault and the SD card may not survive a crash.
- *
- * @group System
- * @boolean
- */
-PARAM_DEFINE_INT32(SYS_HF_MAV, 1);
+__BEGIN_DECLS
+void rgb_led(int r, int g, int b, int freqs);
+__END_DECLS
@@ -1,6 +1,6 @@
 /****************************************************************************
 *
- *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -31,26 +31,18 @@
 *
 ****************************************************************************/

-#include <inttypes.h>
-#include <stdint.h>
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>

-#include <px4_platform_common/getopt.h>
-#include <px4_platform_common/module_params.h>
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI1, {
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin2}),
+	}),
+	initSPIBusExternal(SPI::Bus::SPI2, {
+		initSPIConfigExternal(SPI::CS{GPIO::PortB, GPIO::Pin12}),
+		initSPIConfigExternal(SPI::CS{GPIO::PortC, GPIO::Pin13}),
+	}),
+};

-#include "board_config.h"
-
-extern "C" int pwm_voltage_apply_main(int argc, char *argv[])
-{
-	int32_t pwm_volt_sel = 0;
-
-	param_get(param_find("PWM_VOLT_SEL"), &pwm_volt_sel);
-
-	if (pwm_volt_sel != 0) {
-		PWM_5V_VOLT_SEL(true);
-
-	} else {
-		PWM_5V_VOLT_SEL(false);
-	}
-
-	return 0;
-}
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -0,0 +1,54 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer2, DMA{DMA::Index1, DMA::Stream7, DMA::Channel3}),
+	initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
+	initIOTimer(Timer::Timer4, DMA{DMA::Index1, DMA::Stream6, DMA::Channel2}),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel2}, {GPIO::PortA, GPIO::Pin1}),
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortB, GPIO::Pin10}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel1}, {GPIO::PortB, GPIO::Pin4}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel2}, {GPIO::PortB, GPIO::Pin5}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortB, GPIO::Pin7}),
+};
+
+constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+	initIOTimerChannelMapping(io_timers, timer_io_channels);
@@ -0,0 +1,17 @@
+# UAVCAN boot loadable Module ID
+set(uavcanblid_sw_version_major ${PX4_VERSION_MAJOR})
+set(uavcanblid_sw_version_minor ${PX4_VERSION_MINOR})
+add_definitions(
+	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
+	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
+)
+
+set(uavcanblid_hw_version_major 0)
+set(uavcanblid_hw_version_minor 83)
+set(uavcanblid_name "\"org.auterion.cannode\"")
+
+add_definitions(
+	-DHW_UAVCAN_NAME=${uavcanblid_name}
+	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
+	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
+)
@@ -43,7 +43,6 @@ CONFIG_FIGURE_OF_EIGHT=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
@@ -20,7 +20,6 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
-CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
@@ -43,8 +42,8 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
 CONFIG_MODULES_FW_MODE_MANAGER=y
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -12,17 +12,10 @@ else
 fi

 iim42652 -s -R 22 start
-
 bmi088 -A -R 29 -s start
-if ! bmi088 -G -R 29 -s start
-then
-	iim42653 -s -b 2 -R 22 start
-fi
+bmi088 -G -R 29 -s start

-if ! ist8310 -I -R 18 start
-then
-	iis2mdc -I -R 37 start
-fi
+ist8310 -I -R 18 start

 bmp581 -s start
 icp201xx -I start
@@ -42,7 +42,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortG, GPIO::Pin2}, SPI::DRDY{GPIO::PortG, GPIO::Pin3}),
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
-		initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortD, GPIO::Pin12}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 	}, {GPIO::PortI, GPIO::Pin11}),
 	// initSPIBus(SPI::Bus::SPI3,{
 	// 	// no devices
@@ -14,7 +14,6 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
 CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
 CONFIG_DRIVERS_PWM_OUT=y
@@ -5,16 +5,14 @@

 board_adc start

-if ! mpu6000 -R 6 -s start; then
+if ! mpu6000 -R 6 -s start
+then
 	# some boards such as the Hobbywing XRotor F4 G2 use the ICM-20602
-	if ! icm20602 -s -R 6 start; then
-		# The ICM-42688-P is used on the Diatone Mamba F405 MK2 v2
-		icm42688p -s -R 4 start
-	fi
+	icm20602 -s -R 6 start
 fi

 if ! hmc5883 -T -X start
-then
+then	
 	if mpu9250_i2c -X -b 2 -a 0x68 -R 28 start; then
 		sleep 1 # wait for mpu9250 to be configured with bypass enabled
 		ak8963 -X -b 2 -R 30 start # -R 34
@@ -39,7 +39,6 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI1, {
 		initSPIDevice(DRV_IMU_DEVTYPE_MPU6000, SPI::CS{GPIO::PortA, GPIO::Pin4}),
 		initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortA, GPIO::Pin4}),
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}),
 	}),
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),
@@ -5,8 +5,6 @@ CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
-CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
 CONFIG_DRIVERS_BAROMETER_GOERTEK_SPA06=y
@@ -63,6 +61,7 @@ CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
@@ -74,7 +74,7 @@
 #define BOARD_TYPE                     1105
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE           (2 * 128 * 1024)
+#define APP_RESERVATION_SIZE           (1 * 128 * 1024)

 #define OSC_FREQ                       16

@@ -6,7 +6,6 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS5"
-CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
@@ -31,6 +30,7 @@ CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=6
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -70,17 +70,22 @@ CONFIG_MODULES_NAVIGATOR=y
 CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-# CONFIG_MODULES_TEMPERATURE_COMPENSATION is not set
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
 CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y
@@ -7,7 +7,7 @@
    "summary": "KAKUTEH7",
    "version": "0.1",
    "image_size": 0,
-    "image_maxsize": 1703936,
+    "image_maxsize": 1835008,
    "git_identity": "",
    "board_revision": 0
 }
@@ -110,7 +110,7 @@
 MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1664K /* params in last two sectors */
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */

 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
@@ -72,7 +72,7 @@
 #define BOARD_TYPE                     5409
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE           (2 * 128 * 1024)
+#define APP_RESERVATION_SIZE           (1 * 128 * 1024)

 #define OSC_FREQ                       8

@@ -48,11 +48,6 @@
 * of leds for system indication at will and there is no
 * separate switch, we need to build independent of the
 * CONFIG_ARCH_LEDS configuration switch.
- *
- * KakuteH7 DualIMU LED configuration:
- * - Red LED (PE9): TRIP LED, active high
- * - Blue LED (PC2): Status LED, active low
- * - Green LED: Hardware controlled, always on when powered (no software control)
 */
 __BEGIN_DECLS
 extern void led_init(void);
@@ -61,28 +56,11 @@ extern void led_off(int led);
 extern void led_toggle(int led);
 __END_DECLS

-#ifdef CONFIG_ARCH_LEDS
-static bool nuttx_owns_leds = true;
-//                                B  R  S  G
-//                                0  1  2  3
-static const uint8_t xlatpx4[] = {1, 0, 4, 2};
-#  define xlat(p) xlatpx4[(p)]
-static uint32_t g_ledmap[] = {
-	GPIO_LED_RED,                       // Indexed by BOARD_LED_RED
-	GPIO_nLED_BLUE,                     // Indexed by BOARD_LED_BLUE
-};

-static bool g_led_inverted[] = {
-	false, // LED_RED is active high
-	true,  // LED_BLUE is active low
-};
-
-#else
-
-#  define xlat(p) (p)
+#define xlat(p) (p)
 static uint32_t g_ledmap[] = {
 	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_LED_RED,                       // Indexed by LED_RED
+	GPIO_LED_RED,                      // Indexed by LED_RED
 };

 static bool g_led_inverted[] = {
@@ -90,7 +68,6 @@ static bool g_led_inverted[] = {
 	false, // LED_RED is active high
 };

-#endif

 __EXPORT void led_init(void)
 {
@@ -1,17 +1,15 @@
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_MODE_MANAGER=n
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_MODULES_ROVER_ACKERMANN=y
-CONFIG_MODULES_ROVER_DIFFERENTIAL=y
-CONFIG_MODULES_ROVER_MECANUM=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_OPTICAL_FLOW_PX4FLOW=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -1,17 +0,0 @@
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_MODE_MANAGER=n
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_MC_ATT_CONTROL=n
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
-CONFIG_MODULES_MC_POS_CONTROL=n
-CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_MODULES_ROVER_ACKERMANN=y
-CONFIG_MODULES_ROVER_DIFFERENTIAL=y
-CONFIG_MODULES_ROVER_MECANUM=y
@@ -1,17 +0,0 @@
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_MODE_MANAGER=n
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_MC_ATT_CONTROL=n
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
-CONFIG_MODULES_MC_POS_CONTROL=n
-CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_MODULES_ROVER_ACKERMANN=y
-CONFIG_MODULES_ROVER_DIFFERENTIAL=y
-CONFIG_MODULES_ROVER_MECANUM=y
@@ -1,17 +0,0 @@
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_MODE_MANAGER=n
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_MC_ATT_CONTROL=n
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
-CONFIG_MODULES_MC_POS_CONTROL=n
-CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_MODULES_ROVER_ACKERMANN=y
-CONFIG_MODULES_ROVER_DIFFERENTIAL=y
-CONFIG_MODULES_ROVER_MECANUM=y
@@ -1,17 +1,23 @@
+CONFIG_DRIVERS_IRLOCK=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_UUV_ATT_CONTROL=n
+CONFIG_MODULES_UUV_POS_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
+# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y
@@ -64,7 +64,6 @@ CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
@@ -1,3 +1,4 @@
+CONFIG_DRIVERS_IRLOCK=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
@@ -5,6 +6,7 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -12,6 +14,7 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
+# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y
--- a/Show More
+++ b/Show More