ci: no docker instead install python deps

in favor of new build all

.ci/Jenkinsfile-compile

@@ -0,0 +1,222 @@
+#!/usr/bin/env groovy
+
+pipeline {
+  agent none
+  stages {
+
+    stage('Build') {
+      steps {
+        script {
+          def build_nodes = [:]
+          def docker_images = [
+            armhf: "px4io/px4-dev-armhf:2023-06-26",
+            arm64: "px4io/px4-dev-aarch64:2022-08-12",
+            base: "px4io/px4-dev-ros2-foxy:2022-08-12",
+            nuttx: "px4io/px4-dev-nuttx-focal:2022-08-12",
+          ]
+
+          def armhf_builds = [
+            target: ["beaglebone_blue_default", "emlid_navio2_default", "px4_raspberrypi_default", "scumaker_pilotpi_default"],
+            image: docker_images.armhf,
+            archive: false
+          ]
+
+          def arm64_builds = [
+            target: ["scumaker_pilotpi_arm64"],
+            image: docker_images.arm64,
+            archive: false
+          ]
+
+          def base_builds = [
+            target: ["px4_sitl_default"],
+            image: docker_images.base,
+            archive: false
+          ]
+
+          def nuttx_builds_archive = [
+            target: [
+                     "airmind_mindpx-v2_default",
+                     "ark_can-flow_canbootloader",
+                     "ark_can-flow_default",
+                     "ark_can-gps_canbootloader",
+                     "ark_can-gps_default",
+                     "ark_can-rtk-gps_canbootloader",
+                     "ark_can-rtk-gps_default",
+                     "ark_cannode_canbootloader",
+                     "ark_cannode_default",
+                     "ark_fmu-v6x_bootloader",
+                     "ark_fmu-v6x_default",
+                     "ark_pi6x_bootloader",
+                     "ark_pi6x_default",
+                     "atl_mantis-edu_default",
+                     "av_x-v1_default",
+                     "bitcraze_crazyflie21_default",
+                     "bitcraze_crazyflie_default",
+                     "cuav_can-gps-v1_canbootloader",
+                     "cuav_can-gps-v1_default",
+                     "cuav_nora_default",
+                     "cuav_x7pro_default",
+                     "cubepilot_cubeorange_default",
+                     "cubepilot_cubeorangeplus_default",
+                     "cubepilot_cubeyellow_default",
+                     "diatone_mamba-f405-mk2_default",
+                     "flywoo_gn-f405_default",
+                     "freefly_can-rtk-gps_canbootloader",
+                     "freefly_can-rtk-gps_default",
+                     "holybro_can-gps-v1_canbootloader",
+                     "holybro_can-gps-v1_default",
+                     "holybro_durandal-v1_default",
+                     "holybro_kakutef7_default",
+                     "holybro_kakuteh7_default",
+                     "holybro_kakuteh7mini_default",
+                     "holybro_kakuteh7v2_default",
+                     "holybro_pix32v5_default",
+                     "matek_gnss-m9n-f4_canbootloader",
+                     "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
+                     "modalai_fc-v1_default",
+                     "modalai_fc-v2_default",
+                     "mro_ctrl-zero-classic_default",
+                     "mro_ctrl-zero-f7-oem_default",
+                     "mro_ctrl-zero-f7_default",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_pixracerpro_default",
+                     "mro_x21-777_default",
+                     "mro_x21_default",
+                     "nxp_fmuk66-e_default",
+                     "nxp_fmuk66-e_socketcan",
+                     "nxp_fmuk66-v3_default",
+                     "nxp_fmuk66-v3_socketcan",
+                     "nxp_mr-canhubk3_default",
+                     "nxp_ucans32k146_canbootloader",
+                     "nxp_ucans32k146_default",
+                     "omnibus_f4sd_default",
+                     "px4_fmu-v2_default",
+                     "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
+                     "px4_fmu-v2_multicopter",
+                     "px4_fmu-v2_rover",
+                     "px4_fmu-v3_default",
+                     "px4_fmu-v4_default",
+                     "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
+                     "px4_fmu-v5_debug",
+                     "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
+                     "px4_fmu-v5_rover",
+                     "px4_fmu-v5_stackcheck",
+                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5x_default",
+                     "px4_fmu-v5x_rover",
+                     "px4_fmu-v6c_default",
+                     "px4_fmu-v6c_rover",
+                     "px4_fmu-v6u_default",
+                     "px4_fmu-v6u_rover",
+                     "px4_fmu-v6x_default",
+                     "px4_fmu-v6x_rover",
+                     "px4_fmu-v6xrt_bootloader",
+                     "px4_fmu-v6xrt_default",
+                     "px4_fmu-v6xrt_rover",
+                     "px4_io-v2_default",
+                     "raspberrypi_pico_default",
+                     "siyi_n7_default",
+                     "sky-drones_smartap-airlink_default",
+                     "spracing_h7extreme_default",
+                     "thepeach_k1_default",
+                     "thepeach_r1_default",
+                     "uvify_core_default",
+            ],
+            image: docker_images.nuttx,
+            archive: true
+          ]
+
+          def docker_builds = [
+            armhf_builds, base_builds, nuttx_builds_archive
+          ]
+
+          for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
+            for (def build_target = 0; build_target < docker_builds[build_type].target.size(); build_target++) {
+              build_nodes.put(docker_builds[build_type].target[build_target],
+                createBuildNode(docker_builds[build_type].archive, docker_builds[build_type].image, docker_builds[build_type].target[build_target])
+                )
+            }
+          }
+
+        parallel build_nodes
+
+        } // script
+      } // steps
+    } // stage Build
+
+    // TODO: actually upload artifacts to S3
+    // stage('S3 Upload') {
+    //   agent {
+    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
+    //   }
+    //   options {
+    //         skipDefaultCheckout()
+    //   }
+    //   when {
+    //     anyOf {
+    //       branch 'master'
+    //       branch 'beta'
+    //       branch 'stable'
+    //       branch 'pr-jenkins' // for testing
+    //     }
+    //   }
+    //   steps {
+    //     sh 'echo "uploading to S3"'
+    //   }
+    // }
+
+  } // stages
+  environment {
+    CCACHE_DIR = '/tmp/ccache'
+    CI = true
+  }
+  options {
+    buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
+    timeout(time: 120, unit: 'MINUTES')
+  }
+}
+
+def createBuildNode(Boolean archive, String docker_image, String target) {
+  return {
+
+    bypass_entrypoint = ''
+
+    node {
+      docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {
+        docker.image(docker_image).inside('-e CCACHE_BASEDIR=${WORKSPACE} -v ${CCACHE_DIR}:${CCACHE_DIR}:rw' + bypass_entrypoint) {
+          stage(target) {
+            try {
+              sh('export')
+              checkout(scm)
+              sh('make distclean; git clean -ff -x -d .')
+              sh('git fetch --tags')
+              sh('ccache -s')
+              sh('make ' + target)
+              sh('ccache -s')
+              sh('make sizes')
+              if (archive) {
+                archiveArtifacts(allowEmptyArchive: false, artifacts: 'build/*/*.px4, build/*/*.elf, build/*/*.bin', fingerprint: true, onlyIfSuccessful: true)
+              }
+              sh('make ' + target + ' package')
+              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.tar.bz2', fingerprint: true, onlyIfSuccessful: true)
+              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.deb', fingerprint: true, onlyIfSuccessful: true)
+            }
+            catch (exc) {
+              throw (exc)
+            }
+            finally {
+              sh('make distclean; git clean -ff -x -d .')
+            }
+          }
+        }
+      }
+    }
+  }
+}

.ci/Jenkinsfile-hardware

@@ -0,0 +1,904 @@
+#!/usr/bin/env groovy
+
+pipeline {
+  agent none
+  stages {
+    stage('Hardware Test') {
+
+      parallel {
+
+        stage("cubepilot_cubeorange_test") {
+          stages {
+            stage("build cubepilot_cubeorange_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make cubepilot_cubeorange_bootloader'
+                sh 'make cubepilot_cubeorange_test'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*, build/cubepilot_cubeorange_test/etc/init.d/airframes/*', name: 'cubepilot_cubeorange_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'cubepilot_cubeorange'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'cubepilot_cubeorange_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_bootloader/cubepilot_cubeorange_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    // run tests
+                    runTests()
+
+                    // load all airframes
+                    // sh("./Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` `cd build/cubepilot_cubeorange_test/etc/init.d/airframes/; find . -regex '.*/[0-9].*' -exec basename {} \\; | cut -d '_' -f 1` || true") // test loading all airframes\
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("cuav_x7pro_test") {
+          stages {
+            stage("build cuav_x7pro_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make cuav_x7pro_bootloader'
+                sh 'make cuav_x7pro_test'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'cuav_x7pro'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'cuav_x7pro_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_bootloader/cuav_x7pro_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v4_test") {
+          stages {
+            stage("build px4_fmu-v4_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v4_test'
+                sh 'make px4_fmu-v4_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v4'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v4_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v4pro_test") {
+          stages {
+            stage("build px4_fmu-v4pro_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v4pro_test'
+                sh 'make px4_fmu-v4pro_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4pro_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v4pro'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v4pro_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v5_debug") {
+          stages {
+            stage("build px4_fmu-v5_debug") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v5_debug'
+                sh 'make px4_fmu-v5_debug bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_debug'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v5'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v5_debug'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600 || true'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+
+                    // test dataman
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+                    checkStatus()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v5_stackcheck") {
+          stages {
+            stage("build px4_fmu-v5_stackcheck") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v5_stackcheck'
+                sh 'make px4_fmu-v5_stackcheck bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_stackcheck'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v5'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v5_stackcheck'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+
+                    // test dataman
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+                    checkStatus()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v5_test") {
+          stages {
+            stage("build px4_fmu-v5_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v5_test'
+                sh 'make px4_fmu-v5_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v5'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v5_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("nxp_fmuk66-v3_test") {
+          stages {
+            stage("build nxp_fmuk66-v3_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make nxp_fmuk66-v3_test'
+                //sh 'make nxp_fmuk66-v3_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'nxp_fmuk66-v3_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'nxp_fmuk66-v3'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'nxp_fmuk66-v3_test'
+                    //sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+      } // parallel
+    } // stage Hardware Test
+  } // stages
+  environment {
+    CCACHE_DIR = '/tmp/ccache'
+    CCACHE_NOHASHDIR = 1
+    CI = true
+  }
+  options {
+    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
+    timeout(time: 180, unit: 'MINUTES')
+    skipDefaultCheckout()
+  }
+}
+
+void checkoutSCM() {
+  retry(3) {
+    checkout scm
+    sh 'export'
+    sh 'make distclean; git clean -ff -x -d .'
+    sh 'git fetch --tags'
+    sh 'ccache -z'
+  }
+}
+
+void quickCalibrate() {
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters before
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+}
+
+void checkStatus() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+
+  // status commands
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+}
+
+void resetParameters() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "CBRK_BUZZER" --value "782097"'
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SDLOG_DIRS_MAX" --value "1"'
+}
+
+void runTests() {
+
+  // test loading a range of airframes
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
+
+  resetParameters()
+
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink_tests" || true' // TODO
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+
+  // tests (stop modules first)
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink stop-all"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "navigator stop"'
+  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
+
+  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
+}
+
+void printTopics() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+
+  // these are for casually inspecting the system, output failure doesn't matter
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_wind" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener commander_state" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_odometry" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_optical_flow_vel" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_states" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_wind" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener event" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener heater_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener input_rc" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener led_control" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener log_message" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener manual_control_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mavlink_log" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mission" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener multirotor_motor_limits" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener optical_flow" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_controller_landing_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_setpoint_triplet" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener radio_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener rate_ctrl_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener safety" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fft" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_preflight_mag" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command_ack" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_control_mode" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_land_detected" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
+}
+
+void resetBoard() {
+  resetParameters()
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+}

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -20,14 +20,14 @@ body:
           3. Took off '....'
           4. See error
     validations:
-      required: false
+      required: true
 
   - type: textarea
     attributes:
       label: Expected behavior
       description: A clear and concise description of what you expected to happen.
     validations:
-      required: false
+      required: true
 
   - type: textarea
     attributes:
@@ -45,7 +45,7 @@ body:
       placeholder: |
           # PASTE HERE THE LINK TO THE LOG
     validations:
-      required: false
+      required: true
 
   - type: markdown
     attributes:
@@ -60,14 +60,14 @@ body:
       placeholder: |
           # If you don't know the version, paste the output of `ver all` in the MAVLink Shell of QGC
     validations:
-      required: false
+      required: true
 
   - type: input
     attributes:
       label: Flight controller
       description: Specify your flight controller model (what type is it, where was it bought from, ...).
     validations:
-      required: false
+      required: true
 
   - type: dropdown
     attributes:

.github/workflows/build_all_targets.yml

@@ -1,87 +1,70 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
 name: Build all targets
 
 on:
   push:
-    tags:
-      - 'v*'
     branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-  pull_request:
-    branches:
-      - '*'
+    - 'mrpollo/ci_runner_groups'
 
 jobs:
   group_targets:
-    name: Scan for Board Targets
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=2cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    # container:
+    #   image: px4io/px4-dev-base-focal:2021-09-08
+      # options: --user 1001
     outputs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
       timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
-      tagname: ${{ steps.set-tag.outputs.tagname }}
-      branchname: ${{ steps.set-branch.outputs.branchname }}
     steps:
-      - uses: actions/checkout@v4
-
-      - name: Update python packaging to avoid canonicalize_version() error
-        run: |
-            pip3 install -U packaging
-
-      - name: Install Python Dependencies
-        uses: py-actions/py-dependency-install@v4
-        with:
-          path: "./Tools/setup/requirements.txt"
-
-      - id: set-matrix
-        run: echo "::set-output name=matrix::$(./Tools/ci/generate_board_targets_json.py --group)"
-
-      - id: set-timestamp
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
-
-      - id: set-branch
-        run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"
-
-      - name: Debug Matrix Output
-        if: runner.debug == '1'
-        run: |
-          echo "${{ steps.set-timestamp.outputs.timestamp }}"
-          echo "${{ steps.set-branch.outputs.branchname }}"
-          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
+    - uses: actions/checkout@v4
+      #   token: ${{ secrets.ACCESS_TOKEN }}
+    - name: Install Python dependencies
+      uses: py-actions/py-dependency-install@v4
+      with:
+        path: "./Tools/setup/requirements.txt"
+    - id: set-matrix
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py --group)"
+    # - name: debug groups
+    #   run: |
+    #       echo "::group::DebugTargets"
+    #       ./Tools/generate_board_targets_json.py --group --verbose
+    #       echo "::endgroup::"
+    - id: set-timestamp
+      run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
 
   setup:
-    name: Build Group [${{ matrix.group }}]
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    name: ${{ matrix.group }}
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
     needs: group_targets
     strategy:
-      matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
-      fail-fast: false
+      # matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
+      matrix:
+        include:
+          - group: 'nuttx-px4'
+            targets: 'px4_fmu-v5x_default,px4_fmu-v6x_default'
+            container: 'px4io/px4-dev-nuttx-focal:2022-08-12'
+            arch: 'nuttx'
     container:
       image: ${{ matrix.container }}
+      # options: --user 1001
     steps:
       - uses: actions/checkout@v4
         with:
-          fetch-depth: 0
-
-      - name: Git ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Setup ccache
+          submodules: true
+        #   token: ${{ secrets.ACCESS_TOKEN }}
+      - name: debug permissions
+        run: |
+          echo "::group::DebugPermissions"
+          echo $UID
+          echo $PATH
+          echo "::endgroup::"
+      - name: ccache setup keys
         uses: actions/cache@v4
         with:
           path: ~/.ccache
-          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
+          key: ${{ matrix.arch }}-ccache-${{ needs.group_targets.outputs.timestamp }}
+          restore-keys: ${{ matrix.arch }}-ccache-${{ needs.group_targets.outputs.timestamp }}
 
-      - name: Configure ccache
+      - name: setup ccache
         run: |
             mkdir -p ~/.ccache
             echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
@@ -92,67 +75,15 @@ jobs:
             ccache -s
             ccache -z
 
-      - name: Building [${{ matrix.group }}]
-        run: |
-            ./Tools/ci/build_all_runner.sh ${{matrix.targets}}
-
-      - name: Arrange Build Artifacts
-        run: |
-          ./Tools/ci/package_build_artifacts.sh
-
-      - name: Upload Build Artifacts
-        uses: actions/upload-artifact@v4
+      - name: Debug with tmate session
+        uses: mxschmitt/action-tmate@v3
         with:
-          name: px4_${{matrix.group}}_build_artifacts
-          path: artifacts/
+          detached: true
+          # sudo: false
 
-      - name: Cache Save
+      - name: build target group
+        run: |
+            ./Tools/ci_build_all_runner.sh ${{matrix.targets}}
+
+      - name: ccache post-run
         run: ccache -s
-
-  artifacts:
-    name: Upload Artifacts to S3
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Branch Name
-        run: |
-          echo "${{ needs.group_targets.outputs.branchname }}"
-
-      - name: Uploading Artifacts to S3 [${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}]
-        uses: jakejarvis/s3-sync-action@master
-        with:
-          args: --acl public-read
-        env:
-          AWS_S3_BUCKET: 'px4-travis'
-          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-          AWS_REGION: 'us-west-1'
-          SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}/
-
-  release:
-    name: Create Release and Upload Artifacts
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/v')
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Upload Binaries to Release
-        uses: softprops/action-gh-release@v2
-        with:
-          draft: true
-          files: artifacts/*.px4

.github/workflows/clang-tidy.yml

@@ -17,7 +17,5 @@ jobs:
       with:
         token: ${{secrets.ACCESS_TOKEN}}
 
-    - uses: corrupt952/actions-retry-command@v1.0.7
-      with:
-        command: make clang-tidy-quiet
-        max_attempts: 3
+    - name: make clang-tidy-quiet
+      run: make clang-tidy-quiet

.github/workflows/compile_ubuntu.yml

@@ -1,46 +0,0 @@
-name: Ubuntu environment build
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  build_and_test:
-    name: Build and Test
-    strategy:
-      fail-fast: false
-      matrix:
-        version: ['ubuntu:22.04', 'ubuntu:24.04']
-    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: ${{ matrix.version }}
-      volumes:
-        - /github/workspace:/github/workspace
-    steps:
-
-      - name: Fix git in container
-        run: |
-          # we only need this because we are running the job in a container
-          # when checkout pulls git it does it in a shared volume
-          # and file ownership changes between steps
-          # first we install git since its missing from the base image
-          # then we mark the directory as safe for other instances
-          # of git to use.
-          apt update && apt install git -y
-          git config --global --add safe.directory $(realpath .)
-
-      - uses: actions/checkout@v4
-
-      - name: Install Deps, Build, and Make Quick Check
-        run: |
-          # we need to install dependencies and build on the same step
-          # given the stateless nature of docker images
-          ./Tools/setup/ubuntu.sh
-          make quick_check

.github/workflows/deploy_all.yml

@@ -0,0 +1,56 @@
+name: Deploy metadata for all targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+  enumerate_targets:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - id: set-matrix
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
+  build:
+    runs-on: ubuntu-latest
+    needs: enumerate_targets
+    strategy:
+      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
+    container: ${{ matrix.container }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: ownership workaround
+      run: git config --system --add safe.directory '*'
+
+    - name: make ${{matrix.target}}
+      run: make ${{matrix.target}}
+
+    - name: parameter & events metadata
+      run: |
+        make ${{matrix.target}} ver_gen events_json actuators_json
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
+        cd build/${{ matrix.target }}
+        mkdir _metadata || true
+        cp parameters.* events/*.xz actuators.json* _metadata
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
+        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'

.github/workflows/dev_container.yml

@@ -1,102 +0,0 @@
-
-name: Container build
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-    tags:
-      - 'v*'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  build:
-    name: Build and Push Container
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-tags: true
-          submodules: false
-          fetch-depth: 0
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v3
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta
-        uses: docker/metadata-action@v5
-        with:
-          images: |
-            ghcr.io/PX4/px4-dev
-            px4io/px4-dev
-          tags: |
-            type=schedule
-            type=semver,pattern={{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=ref,event=branch,suffix=-{{date 'YYYYMMDD'}},priority=600
-            type=ref,event=branch,suffix=,priority=500
-            type=ref,event=pr
-            type=sha
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-      - name: Build and load container image
-        uses: docker/build-push-action@v6
-        id: docker
-        with:
-          context: Tools/setup
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: |
-            linux/amd64
-          load: true
-          push: false
-          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
-          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max
-
-      - name: Get Tag Name
-        id: tag_name
-        run: |
-          echo "::set-output name=tag_name::$(echo '${{ fromJSON(steps.docker.outputs.metadata)['image.name'] }}' | sed 's/,.*$//')"
-
-      - name: make quick_check
-        uses: addnab/docker-run-action@v3
-        with:
-          image: ${{ steps.tag_name.outputs.tag_name }}
-          options: -v ${{ github.workspace }}:/workspace
-          run: |
-            cd /workspace
-            git config --global --add safe.directory /workspace
-            make px4_sitl_default
-            make px4_fmu-v6x_default
-
-      - name: Push container image
-        uses: docker/build-push-action@v6
-        with:
-          context: Tools/setup
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: |
-            linux/amd64
-          provenance: mode=max
-          push: true
-          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
-          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max

.github/workflows/flash_analysis.yml

@@ -1,118 +0,0 @@
-name: FLASH usage analysis
-
-on:
-  push:
-    branches:
-      - 'main'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  analyze_flash:
-    name: Analyzing ${{ matrix.target }}
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-nuttx-focal
-    strategy:
-      matrix:
-        target: [px4_fmu-v5x, px4_fmu-v6x]
-    outputs:
-      px4_fmu-v5x: ${{ steps.gen-output.outputs.output_px4_fmu-v5x }}
-      px4_fmu-v6x: ${{ steps.gen-output.outputs.output_px4_fmu-v6x }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Git ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Build Target
-        run: make ${{ matrix.target }}
-
-      - name: Store the ELF with the change
-        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./with-change.elf
-
-      - name: Clean previous build
-        run: |
-          make clean
-          make distclean
-
-      - name: If it's a PR checkout the base commit
-        if: ${{ github.event.pull_request }}
-        run: git checkout ${{ github.event.pull_request.base.sha }}
-
-      - name: If it's a push checkout the previous commit
-        if: github.event_name == 'push'
-        run: git checkout ${{ github.event.before }}
-
-      - name: Update submodules
-        run: make submodulesupdate
-
-      - name: Build
-        run: make ${{ matrix.target }}
-
-      - name: Store the ELF before the change
-        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./before-change.elf
-
-      - name: bloaty-action
-        uses: carlosperate/bloaty-action@v1.1.0
-        id: bloaty-step
-        with:
-          bloaty-args: -d sections,compileunits -n 0 ./with-change.elf -- ./before-change.elf
-          output-to-summary: true
-
-      - name: Generate output
-        id: gen-output
-        run: |
-          EOF=$(dd if=/dev/urandom bs=15 count=1 status=none | base64)
-          echo "output_${{ matrix.target }}<<$EOF" >> $GITHUB_OUTPUT
-          echo "${{ steps.bloaty-step.outputs.bloaty-output-encoded }}" >> $GITHUB_OUTPUT
-          echo "$EOF" >> $GITHUB_OUTPUT
-
-  post_pr_comment:
-    name: Publish Results
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [analyze_flash]
-    if: ${{ github.event.pull_request }}
-    steps:
-      - name: Find Comment
-        uses: peter-evans/find-comment@v3
-        id: fc
-        with:
-          issue-number: ${{ github.event.pull_request.number }}
-          comment-author: 'github-actions[bot]'
-          body-includes: FLASH Analysis
-
-      - name: Set Build Time
-        id: bt
-        run: |
-          echo "timestamp=$(date +'%Y-%m-%dT%H:%M:%S')" >> $GITHUB_OUTPUT
-
-      - name: Create or update comment
-        uses: peter-evans/create-or-update-comment@v4
-        with:
-          comment-id: ${{ steps.fc.outputs.comment-id }}
-          issue-number: ${{ github.event.pull_request.number }}
-          body: |
-            ## FLASH Analysis
-            <details>
-              <summary>px4_fmu-v5x</summary>
-
-              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v5x }}
-              ```
-            </details>
-
-            <details>
-              <summary>px4_fmu-v6x</summary>
-
-              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v6x }}
-              ```
-            </details>
-
-            **Updated: _${{ steps.bt.outputs.timestamp }}_**
-          edit-mode: replace

.github/workflows/mavros_mission_tests.yml

@@ -88,7 +88,7 @@ jobs:
       run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
     - name: Upload px4 coredump
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2-preview
       with:
         name: coredump
         path: px4.core
@@ -103,21 +103,21 @@ jobs:
 
     - name: Upload px4 binary
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: binary
         path: build/px4_sitl_default/bin/px4
 
     - name: Store PX4 log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: px4_log
         path: ~/.ros/log/*/*.ulg
 
     - name: Store ROS log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: ros_log
         path: ~/.ros/**/rostest-*.log

.github/workflows/mavros_offboard_tests.yml

@@ -83,7 +83,7 @@ jobs:
       run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
     - name: Upload px4 coredump
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2-preview
       with:
         name: coredump
         path: px4.core
@@ -98,21 +98,21 @@ jobs:
 
     - name: Upload px4 binary
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: binary
         path: build/px4_sitl_default/bin/px4
 
     - name: Store PX4 log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: px4_log
         path: ~/.ros/log/*/*.ulg
 
     - name: Store ROS log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: ros_log
         path: ~/.ros/**/rostest-*.log

.github/workflows/metadata.yml

@@ -0,0 +1,133 @@
+name: Metadata
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+
+  airframe:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: airframe metadata
+      run: |
+        make airframe_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default/docs
+      # TODO: deploy to userguide gitbook
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  module:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: module documentation
+      run: |
+        make module_documentation
+        cd build/px4_sitl_default/docs
+        ls -ls *
+      # TODO: deploy to userguide gitbook and s3
+
+  parameter:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: parameter metadata
+      run: |
+        make parameters_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  events:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: events metadata
+      run: |
+        make extract_events
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default
+        mkdir _events_full || true
+        cp events/all_events_full.json.xz _events_full/all_events.json.xz
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/_events_full/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  uorb_graph:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-nuttx-focal:2022-08-12
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: uORB graph
+      run: |
+        make uorb_graphs
+        cd Tools/uorb_graph
+        ls -ls *
+      # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
+
+  ROS2_msgs:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS2 msgs
+      run: |
+        git clone https://github.com/PX4/px4_msgs.git
+        rm px4_msgs/msg/*.msg
+        rm px4_msgs/srv/*.srv
+        cp msg/*.msg px4_msgs/msg/
+        cp srv/*.srv px4_msgs/srv/

.github/workflows/python_checks.yml

@@ -10,7 +10,7 @@ on:
 
 jobs:
   build:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     steps:
     - uses: actions/checkout@v1
       with:
@@ -18,7 +18,7 @@ jobs:
     - name: Install Python3
       run: sudo apt-get install python3 python3-setuptools python3-pip -y
     - name: Install tools
-      run: python3 -m pip install mypy types-requests flake8 --break-system-packages
+      run: pip3 install --user mypy types-requests flake8
     - name: Check MAVSDK test scripts with mypy
       run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
     - name: Check MAVSDK test scripts with flake8

.github/workflows/sitl_tests.yml

@@ -1,8 +1,3 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
 name: SITL Tests
 
 on:
@@ -15,139 +10,126 @@ on:
 
 jobs:
   build:
-    name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-simulation-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    runs-on: ubuntu-latest
     strategy:
       fail-fast: false
       matrix:
         config:
           - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
+          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
           - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
           - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
 
+    container:
+      image: px4io/px4-dev-simulation-focal:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
 
-      - name: Git Ownership Workaround
-        run: git config --system --add safe.directory '*'
+    - name: Download MAVSDK
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+    - name: Install MAVSDK
+      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
 
-      - id: set-timestamp
-        name: Set timestamp for cache
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
 
-      - name: Cache Key Config
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
-          restore-keys: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
+    - name: check environment
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default
+    - name: ccache post-run px4/firmware
+      run: ccache -s
+    - name: Build SITL Gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default sitl_gazebo-classic
+    - name: ccache post-run sitl_gazebo-classic
+      run: ccache -s
+    - name: Build MAVSDK tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+        DONT_RUN: 1
+      run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
+    - name: ccache post-run mavsdk_tests
+      run: ccache -s
 
-      - name: Cache Conf Config
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
 
-      - name: Build PX4
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default
+    - name: Run SITL tests
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
+      timeout-minutes: 45
 
-      - name: Cache Post-Run [px4_sitl_default]
-        run: ccache -s
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
 
-      - name: Build SITL Gazebo
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default sitl_gazebo-classic
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
 
-      - name: Cache Post-Run [sitl_gazebo-classic]
-        run: ccache -s
-
-      - name: Download MAVSDK
-        run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Install MAVSDK
-        run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Check PX4 Environment Variables
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: |
-            export
-            ulimit -a
-
-      - name: Build PX4 / MAVSDK tests
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-          DONT_RUN: 1
-        run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
-
-      - name: Cache Post-Run [px4_sitl_default sitl_gazebo-classic mavsdk_tests]
-        run: ccache -s
-
-      - name: Core Dump Settings
-        run: |
-            ulimit -c unlimited
-            echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-      - name: Run SITL / MAVSDK Tests
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
-        timeout-minutes: 45
-
-      - name: Upload failed logs
-        if: failure()
-        uses: actions/upload-artifact@v4
-        with:
-          name: failed-${{matrix.config.model}}-logs.zip
-          path: |
-            logs/**/**/**/*.log
-            logs/**/**/**/*.ulg
-            build/px4_sitl_default/tmp_mavsdk_tests/rootfs/*.ulg
-
-      - name: Look at Core files
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-
-      - name: Upload PX4 coredump
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: coredump
-          path: px4.core
-
-      - name: Setup & Generate Coverage Report
-        if: contains(matrix.config.build_type, 'Coverage')
-        run: |
-            git config --global credential.helper "" # disable the keychain credential helper
-            git config --global --add credential.helper store # enable the local store credential helper
-            echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-            git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-            mkdir -p coverage
-            lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-
-      - name: Upload Coverage Information to Codecov
-        if: contains(matrix.config.build_type, 'Coverage')
-        uses: codecov/codecov-action@v4
-        with:
-          token: ${{ secrets.CODECOV_TOKEN }}
-          flags: mavsdk
-          file: coverage/lcov.info
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavsdk
+        file: coverage/lcov.info

.gitmodules

@@ -2,6 +2,10 @@
 	path = src/modules/mavlink/mavlink
 	url = https://github.com/mavlink/mavlink.git
 	branch = master
+[submodule "src/drivers/uavcan/libuavcan"]
+	path = src/drivers/uavcan/libuavcan
+	url = https://github.com/dronecan/libuavcan.git
+	branch = main
 [submodule "Tools/simulation/jmavsim/jMAVSim"]
 	path = Tools/simulation/jmavsim/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
@@ -79,13 +83,3 @@
 [submodule "boards/modalai/voxl2/libfc-sensor-api"]
 	path = boards/modalai/voxl2/libfc-sensor-api
 	url = https://gitlab.com/voxl-public/voxl-sdk/core-libs/libfc-sensor-api.git
-[submodule "src/drivers/actuators/vertiq_io/iq-module-communication-cpp"]
-	path = src/drivers/actuators/vertiq_io/iq-module-communication-cpp
-	url = https://github.com/PX4/iq-module-communication-cpp.git
-	branch = master
-[submodule "src/drivers/uavcan/libdronecan/dsdl"]
-	path = src/drivers/uavcan/libdronecan/dsdl
-	url = https://github.com/PX4/DSDL.git
-[submodule "src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan"]
-	path = src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan
-	url = https://github.com/dronecan/pydronecan

.vscode/cmake-variants.yaml

@@ -111,11 +111,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: px4_fmu-v6xrt_bootloader
-    3dr_ctrl-zero-h7-oem-revg_default:
-      short: 3dr_ctrl-zero-h7-oem-revg
-      buildType: MinSizeRel
-      settings:
-        CONFIG: 3dr_ctrl-zero-h7-oem-revg_default
     airmind_mindpx-v2_default:
       short: airmind_mindpx-v2
       buildType: MinSizeRel
@@ -186,16 +181,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_fmu-v6x_default
-    ark_fpv_bootloader:
-      short: ark_fpv_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_bootloader
-    ark_fpv_default:
-      short: ark_fpv_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_default
     ark_pi6x_bootloader:
       short: ark_pi6x_bootloader
       buildType: MinSizeRel
@@ -241,11 +226,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x7pro_default
-    cuav_7-nano_default:
-      short: cuav_7-nano
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_7-nano_default
     cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
@@ -301,21 +281,6 @@ CONFIG:
       buildType: MiniSizeRel
       settings:
         CONFIG: matek_gnss-m9n-f4_default
-    micoair_h743_default:
-      short: micoair_h743
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743_default
-    micoair_h743-aio_bootloader:
-      short: micoair_h743-aio_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-aio_bootloader
-    micoair_h743-aio_default:
-      short: micoair_h743-aio
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-aio_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
@@ -366,33 +331,8 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_mr-canhubk3_fmu
-    nxp_tropic-community_default:
-      short: nxp_tropic-community_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_tropic-community_default
     raspberrypi_pico_default:
       short: raspberrypi_pico
       buildType: MinSizeRel
       settings:
         CONFIG: raspberrypi_pico_default
-    zeroone_x6_default:
-      short: zeroone_x6
-      buildType: MinSizeRel
-      settings:
-        CONFIG: zeroone_x6_default
-    zeroone_x6_bootloader:
-      short: zeroone_x6_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: zeroone_x6_bootloader
-    x-mav_ap-h743v2_bootloader:
-      short: x-mav_ap-h743v2-boot
-      buildType: MinSizeRel
-      settings:
-        CONFIG: x-mav_ap-h743v2_bootloader
-    x-mav_ap-h743v2_default:
-      short: x-mav_ap-h743v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: x-mav_ap-h743v2_default

CMakeLists.txt

@@ -113,20 +113,12 @@ include(px4_parse_function_args)
 include(px4_git)
 
 execute_process(
-	COMMAND git describe --exclude ext/* --tags --match "v[0-9]*"
+	COMMAND git describe --exclude ext/* --always --tags
 	OUTPUT_VARIABLE PX4_GIT_TAG
 	OUTPUT_STRIP_TRAILING_WHITESPACE
-	RESULTS_VARIABLE GIT_DESCRIBE_RESULT
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	)
 
-# if proper git tag unavilable default to v0.0.0
-if(NOT ${GIT_DESCRIBE_RESULT} MATCHES "0")
-	set(PX4_GIT_TAG "v0.0.0")
-endif()
-
-message(STATUS "PX4_GIT_TAG: ${PX4_GIT_TAG}")
-
 # git describe to X.Y.Z version
 string(REPLACE "." ";" VERSION_LIST ${PX4_GIT_TAG})
 
@@ -173,10 +165,9 @@ set(config_module_list)
 set(config_kernel_list)
 
 # Find Python
-find_package(Python COMPONENTS Interpreter)
-
+find_package(PythonInterp 3)
 # We have a custom error message to tell users how to install python3.
-if(NOT Python_FOUND)
+if(NOT PYTHONINTERP_FOUND)
 	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
 		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
 		"    macOS: brew install python")
@@ -185,7 +176,7 @@ endif()
 option(PYTHON_COVERAGE "Python code coverage" OFF)
 if(PYTHON_COVERAGE)
 	message(STATUS "python coverage enabled")
-	set(Python_EXECUTABLE coverage run -p)
+	set(PYTHON_EXECUTABLE coverage run -p)
 endif()
 
 include(px4_config)
@@ -409,15 +400,8 @@ include(px4_add_gtest)
 if(BUILD_TESTING)
 	include(gtest)
 
-	# Ensure there's no -R without any filter expression since that trips newer ctest versions
-	if(TESTFILTER)
-		set(TESTFILTERARG "-R")
-	else()
-		set(TESTFILTERARG "")
-	endif()
-
 	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test ${TESTFILTERARG} ${TESTFILTER}
+			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R ${TESTFILTER} USES_TERMINAL
 			DEPENDS
 				px4
 				examples__dyn_hello
@@ -482,7 +466,7 @@ foreach(module ${config_module_list})
 endforeach()
 
 add_custom_command(OUTPUT ${uorb_graph_config}
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
 		${graph_module_list} --src-path src/lib
 		--merge-depends
 		--exclude-path src/examples
@@ -503,7 +487,7 @@ include(package)
 
 # install python requirements using configured python
 add_custom_target(install_python_requirements
-	COMMAND ${Python_EXECUTABLE} -m pip install --break-system-packages --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
+	COMMAND ${PYTHON_EXECUTABLE} -m pip install --break-system-packages --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )

Documentation/Doxyfile.in

@@ -828,7 +828,7 @@ RECURSIVE              = YES
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libdronecan \
+EXCLUDE                = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libuavcan \
                          @CMAKE_SOURCE_DIR@/src/examples \
                          @CMAKE_SOURCE_DIR@/src/templates
 

Makefile

@@ -169,7 +169,7 @@ endif
 
 # Pick up specific Python path if set
 ifdef PYTHON_EXECUTABLE
-	override CMAKE_ARGS += -DPython_EXECUTABLE=${PYTHON_EXECUTABLE}
+	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif
 
 # Functions
@@ -324,13 +324,10 @@ px4io_update:
 	git status
 
 bootloaders_update: \
-	3dr_ctrl-zero-h7-oem-revg_bootloader \
 	ark_fmu-v6x_bootloader \
-	ark_fpv_bootloader \
 	ark_pi6x_bootloader \
 	cuav_nora_bootloader \
 	cuav_x7pro_bootloader \
-	cuav_7-nano_bootloader \
 	cubepilot_cubeorange_bootloader \
 	cubepilot_cubeorangeplus_bootloader \
 	hkust_nxt-dual_bootloader \
@@ -342,8 +339,6 @@ bootloaders_update: \
 	matek_h743_bootloader \
 	matek_h743-mini_bootloader \
 	matek_h743-slim_bootloader \
-        micoair_h743_bootloader \
-        micoair_h743-aio_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \
@@ -554,14 +549,14 @@ distclean:
 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
 %:
 	$(if $(filter $(FIRST_ARG),$@), \
-		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) list_config_targets' to get a list of all possible [configuration] targets."),@#)
+		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) help|list_config_targets' to get a list of all possible [configuration] targets."),@#)
 
 # Print a list of non-config targets (based on http://stackoverflow.com/a/26339924/1487069)
 help:
 	@echo "Usage: $(MAKE) <target>"
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
-		awk -v RS= -F: '/(^|\n)# Files(\n|$$)/,/(^|\n)# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
+		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
 		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"

README.md

@@ -63,9 +63,8 @@ Note: This is the source of truth for the active maintainers of PX4 ecosystem.
 | Multirotor | [Matthias Grob](https://github.com/MaEtUgR) |
 | Fixed Wing | [Thomas Stastny](https://github.com/tstastny) |
 | Hybrid VTOL | [Silvan Fuhrer](https://github.com/sfuhrer) |
-| Rover | [Christian Friedrich](https://github.com/chfriedrich98) |
 | Boat | x |
-
+| Rover | x |
 
 See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and the [contributors list](https://github.com/PX4/PX4-Autopilot/graphs/contributors) (Github). However it may be not up to date.
 
@@ -104,7 +103,7 @@ These boards fully comply with Pixhawk Standard, and are maintained by the PX4-A
 
 These boards are maintained to be compatible with PX4-Autopilot by the Manufacturers.
 
-* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/ark_v6x.html)
+* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/arkv6x.html)
 * [CubePilot Cube Orange+](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orangeplus.html)
 * [CubePilot Cube Orange](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orange.html)
 * [CubePilot Cube Yellow](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_yellow.html)
@@ -119,7 +118,7 @@ These boards don't fully comply industry standards, and thus is solely maintaine
 
 ### Experimental
 
-These boards are not maintained by PX4 team nor Manufacturer, and is not guaranteed to be compatible with up to date PX4 releases.
+These boards are nor maintained by PX4 team nor Manufacturer, and is not guaranteed to be compatible with up to date PX4 releases.
 
 * [Raspberry PI with Navio 2](https://docs.px4.io/main/en/flight_controller/raspberry_pi_navio2.html)
 * [Bitcraze Crazyflie 2.0](https://docs.px4.io/main/en/complete_vehicles/crazyflie2.html)

ROMFS/CMakeLists.txt

@@ -124,15 +124,15 @@ add_custom_command(
 		${romfs_copy_stamp}
 	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
 		--airframes-path ${romfs_gen_root_dir}/init.d
 		--start-script ${romfs_gen_root_dir}/init.d/rc.autostart
 		--board ${PX4_BOARD}
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
 		--rc-dir ${romfs_gen_root_dir}/init.d
 		--serial-ports ${board_serial_ports} ${added_arguments}
 		--config-files ${module_config_files} #--verbose
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/filepaths/generate_config.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/filepaths/generate_config.py
 		--rc-dir ${romfs_gen_root_dir}/init.d
 		--params-file ${CONFIG_BOARD_PARAM_FILE}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_copy_stamp}
@@ -330,7 +330,7 @@ add_custom_target(romfs_gen_files_target
 
 add_custom_command(
 	OUTPUT romfs_pruned.stamp
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py --folder ${romfs_gen_root_dir} --board ${PX4_BOARD}
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py --folder ${romfs_gen_root_dir} --board ${PX4_BOARD}
 	COMMAND ${CMAKE_COMMAND} -E touch romfs_pruned.stamp
 	DEPENDS
 		romfs_copy.stamp

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -19,6 +19,8 @@ param set-default SENS_EN_MAGSIM 1
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 # Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -21,6 +21,8 @@ param set-default SENS_EN_ARSPDSIM 1
 param set-default CBRK_USB_CHK 197848
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -30,6 +30,8 @@ param set-default MAV_TYPE 19
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165

ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo-classic_iris_opt_flow

@@ -47,5 +47,5 @@ param set-default MPC_ALT_MODE 2
 
 param set-default SENS_FLOW_ROT 6
 param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 15
+param set-default SENS_FLOW_MAXHGT 3
 param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1013_gazebo-classic_iris_vision

@@ -5,7 +5,7 @@
 # @type Quadrotor Wide
 #
 
-. ${R}etc/init.d-posix/airframes/10015_gazebo-classic_iris
+. ${R}etc/init.d-posix/airframes/10016_gazebo-classic_iris
 
 # EKF2: Vision position and heading, no GPS
 param set-default EKF2_EV_DELAY 5

ROMFS/px4fmu_common/init.d-posix/airframes/1045_gazebo-classic_quadtailsitter

@@ -33,7 +33,7 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 0
 
-param set-default FD_FAIL_R 70
+parm set-default FD_FAIL_R 70
 
 param set-default FW_P_TC 0.6
 

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -24,33 +24,33 @@ param set-default FW_LND_ANG 8
 param set-default NPFG_PERIOD 12
 
 param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.2
+param set-default FW_PR_FF 0.5
 param set-default FW_PR_I 0.5
 param set-default TRIM_PITCH -0.15
 
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.4
-param set-default FW_RR_I 0.7
-
-param set-default FW_R_RMAX 56.15
-
-param set-default FW_YR_FF 0.3
-param set-default FW_YR_P 1.3
-param set-default FW_YR_I 0.7
-
-param set-default FW_PSP_OFF 0
+param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MIN -15
 
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
 param set-default FW_SPOILERS_LND 0.4
 
-param set-default FW_T_CLMB_MAX 5
-param set-default FW_T_SINK_MAX 3.5
-param set-default FW_T_SINK_MIN 3
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
-param set-default FD_ESCS_EN 0
-
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -75,6 +75,7 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters
@@ -96,6 +97,11 @@ param set-default IMU_GYRO_CUTOFF 100
 
 # Power Parameters
 param set-default BAT1_N_CELLS 4
+# param set-default BAT1_A_PER_V 36.364		Not found
+# param set-default BAT1_V_DIV 18.182		Not found
+
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default THR_MDL_FAC 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane

@@ -16,36 +16,39 @@ param set-default SENS_EN_MAGSIM 1
 param set-default SENS_EN_ARSPDSIM 1
 
 param set-default FW_LND_ANG 8
+param set-default NPFG_PERIOD 12
 
-param set-default FW_PR_FF 0.08
-param set-default FW_PR_I 0.3
-param set-default FW_PR_P 0.08
-
-param set-default FW_RR_FF 0.05
-param set-default FW_RR_I 0.2
-param set-default FW_RR_P 0.03
-
-param set-default FW_YR_FF 0.3
-param set-default FW_YR_I 0.4
-param set-default FW_YR_P 0.2
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
 
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
 param set-default FW_SPOILERS_LND 0.4
 
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
 
-param set-default FW_T_CLMB_R_SP 5
-param set-default FW_T_CLMB_MAX 6
+param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
@@ -53,6 +56,7 @@ param set-default RWTO_TKOFF 1
 param set-default CA_AIRFRAME 1
 
 param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
 
 param set-default CA_SV_CS_COUNT 6
 param set-default CA_SV_CS0_TRQ_R -0.5

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -6,51 +6,26 @@
 . ${R}etc/init.d/rc.rover_differential_defaults
 
 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover}
 
 param set-default SIM_GZ_EN 1 # Gazebo bridge
 
-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAX_ACCEL 5
-param set-default RD_MAX_DECEL 10
-param set-default RD_MAX_JERK 30
-param set-default RD_MAX_THR_YAW_R 1.5
-param set-default RD_YAW_RATE_P 0.25
-param set-default RD_YAW_RATE_I 0.01
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_SPEED 2
-param set-default RD_MAX_THR_SPD 2.15
-param set-default RD_SPEED_P 0.1
-param set-default RD_SPEED_I 0.01
-param set-default RD_MAX_YAW_RATE 180
-param set-default RD_MISS_SPD_DEF 2
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-param set-default RD_MAX_YAW_ACCEL 1000
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
-param set-default PP_LOOKAHD_GAIN 1
-
 # Simulated sensors
 param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 0
 param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
+param set-default SENS_EN_ARSPDSIM 1
 
 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 70
-param set-default SIM_GZ_WH_MAX1 130
+param set-default SIM_GZ_WH_MIN1 0
+param set-default SIM_GZ_WH_MAX1 200
 param set-default SIM_GZ_WH_DIS1 100
 
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 70
-param set-default SIM_GZ_WH_MAX2 130
+param set-default SIM_GZ_WH_MIN2 0
+param set-default SIM_GZ_WH_MAX2 200
 param set-default SIM_GZ_WH_DIS2 100
 
 param set-default SIM_GZ_WH_REV 1 # reverse right wheel

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -15,28 +15,14 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 0
 param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
+param set-default SENS_EN_ARSPDSIM 1
 # We can arm and drive in manual mode when it slides and GPS check fails:
 param set-default COM_ARM_WO_GPS 1
 
-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_YAW_RATE_I 0.1
-param set-default RD_YAW_RATE_P 5
-param set-default RD_MAX_ACCEL 1
-param set-default RD_MAX_JERK 3
-param set-default RD_MAX_SPEED 8
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_YAW_RATE 30
-param set-default RD_MISS_SPD_DEF 8
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
-param set-default PP_LOOKAHD_GAIN 1
+# Set Differential Drive Kinematics Library parameters:
+param set RDD_WHEEL_BASE 0.9
+param set RDD_WHEEL_RADIUS 0.22
+param set RDD_WHEEL_SPEED 10.0	# Maximum wheel speed rad/s, approx 8 km/h
 
 # Actuator mapping - set SITL motors/servos output parameters:
 
@@ -50,14 +36,14 @@ param set-default SIM_GZ_WH_FUNC1 101 # right wheel
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
 #param set-default SIM_GZ_WH_MIN2 0
 #param set-default SIM_GZ_WH_MAX2 200
-#param set-default SIM_GZ_WH_DIS2 100
+#aram set-default SIM_GZ_WH_DIS2 100
 #param set-default SIM_GZ_WH_FAIL2 100
 
 param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
 
-# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation.
-# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate
-# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator
+# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation. 
+# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate 
+# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator 
 # controls in practical scenarios.
 
 # Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):

ROMFS/px4fmu_common/init.d-posix/airframes/4012_gz_rover_ackermann

@@ -15,18 +15,16 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default NAV_ACC_RAD 0.5
 param set-default RA_ACC_RAD_GAIN 2
 param set-default RA_ACC_RAD_MAX 3
-param set-default RA_LAT_ACCEL_I 0.01
-param set-default RA_LAT_ACCEL_P 0.1
-param set-default RA_MAX_ACCEL 3
-param set-default RA_MAX_DECEL 6
+param set-default RA_MAX_ACCEL 1.5
 param set-default RA_MAX_JERK 15
-param set-default RA_MAX_LAT_ACCEL 4
 param set-default RA_MAX_SPEED 3
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_MAX_STR_RATE 360
-param set-default RA_MAX_THR_SPEED 3.1
+param set-default RA_MISS_VEL_DEF 3
+param set-default RA_MISS_VEL_GAIN 5
+param set-default RA_MISS_VEL_MIN 1
 param set-default RA_SPEED_I 0.01
-param set-default RA_SPEED_P 0.1
+param set-default RA_SPEED_P 2
 param set-default RA_WHEEL_BASE 0.321
 
 # Pure Pursuit parameters

ROMFS/px4fmu_common/init.d-posix/airframes/4013_gz_x500_lidar

@@ -1,10 +1,10 @@
 #!/bin/sh
 #
-# @name Gazebo x500 lidar 2d
+# @name Gazebo x500 lidar
 #
 # @type Quadrotor
 #
 
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_2d}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar}
 
 . ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4014_gz_x500_mono_cam_down

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 mono cam
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_mono_cam_down}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4015_gz_r1_rover_mecanum

@@ -1,64 +0,0 @@
-#!/bin/sh
-# @name Aion Robotics R1 Rover
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_mecanum_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover_mecanum}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Rover parameters
-param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAN_YAW_SCALE 0.1
-param set-default RM_YAW_RATE_I 0
-param set-default RM_YAW_RATE_P 0.01
-param set-default RM_MAX_ACCEL 3
-param set-default RM_MAX_JERK 5
-param set-default RM_MAX_SPEED 4
-param set-default RM_MAX_THR_SPD 7
-param set-default RM_MAX_THR_YAW_R 7.5
-param set-default RM_YAW_P 5
-param set-default RM_YAW_I 0.1
-param set-default RM_MAX_YAW_RATE 180
-param set-default RM_MISS_SPD_DEF 3
-param set-default RM_MISS_VEL_GAIN 1
-param set-default RM_SPEED_I 0.01
-param set-default RM_SPEED_P 0.1
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-param set-default PP_LOOKAHD_GAIN 0.5
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
-
-# Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
-param set-default SIM_GZ_WH_DIS1 100
-
-param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
-param set-default SIM_GZ_WH_DIS2 100
-
-param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
-param set-default SIM_GZ_WH_MIN3 0
-param set-default SIM_GZ_WH_MAX3 200
-param set-default SIM_GZ_WH_DIS3 100
-
-param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
-param set-default SIM_GZ_WH_MIN4 0
-param set-default SIM_GZ_WH_MAX4 200
-param set-default SIM_GZ_WH_DIS4 100
-
-param set-default SIM_GZ_WH_REV 10

ROMFS/px4fmu_common/init.d-posix/airframes/4016_gz_x500_lidar_down

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 lidar down
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_down}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4017_gz_x500_lidar_front

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 lidar front
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_front}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -84,11 +84,7 @@ px4_add_romfs_files(
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
 	4012_gz_rover_ackermann
-	4013_gz_x500_lidar_2d
-	4014_gz_x500_mono_cam_down
-	4015_gz_r1_rover_mecanum
-	4016_gz_x500_lidar_down
-	4017_gz_x500_lidar_front
+	4013_gz_x500_lidar
 
 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -29,7 +29,7 @@ mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_of
 mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
 
 # Onboard link to gimbal
-mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -f -m gimbal -o $udp_onboard_gimbal_port_remote
+mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
 
 # To display for SIH sitl
 if [ "$PX4_SIMULATOR" = "sihsim" ]; then

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -181,7 +181,7 @@ param set-default TRIG_INTERFACE 3
 param set-default SYS_FAILURE_EN 1
 # Enable low-battery actions by default for (automated) testing. Battery sim
 # does not go below 50% by default, but failure injection can trigger failsafes.
-param set-default COM_LOW_BAT_ACT 3
+param set-default COM_LOW_BAT_ACT 2
 
 
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
@@ -190,11 +190,11 @@ if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	echo "COM_DL_LOSS_T set to $COM_DL_LOSS_T_LONGER"
 	param set COM_DL_LOSS_T $COM_DL_LOSS_T_LONGER
 
-	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
+	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
 	echo "COM_RC_LOSS_T set to $COM_RC_LOSS_T_LONGER"
 	param set COM_RC_LOSS_T $COM_RC_LOSS_T_LONGER
 
-	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
+	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
 	echo "COM_OF_LOSS_T set to $COM_OF_LOSS_T_LONGER"
 	param set COM_OF_LOSS_T $COM_OF_LOSS_T_LONGER
 

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -78,7 +78,7 @@ if(CONFIG_MODULES_ROVER_POS_CONTROL)
 	)
 endif()
 
-if(CONFIG_MODULES_ROVER_DIFFERENTIAL)
+if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	px4_add_romfs_files(
 		rc.rover_differential_apps
 		rc.rover_differential_defaults
@@ -92,13 +92,6 @@ if(CONFIG_MODULES_ROVER_ACKERMANN)
 	)
 endif()
 
-if(CONFIG_MODULES_ROVER_MECANUM)
-	px4_add_romfs_files(
-		rc.rover_mecanum_apps
-		rc.rover_mecanum_defaults
-	)
-endif()
-
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		rc.uuv_apps

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -18,6 +18,8 @@ param set UAVCAN_ENABLE 0
 # disable some checks to allow to fly
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 # Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -96,5 +96,7 @@ param set UAVCAN_ENABLE 0
 # disable some checks to allow to fly
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default MAV_TYPE 22

ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil

@@ -20,6 +20,8 @@ param set SYS_HITL 2
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set SIH_VEHICLE_TYPE 0
 

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -41,6 +41,8 @@ param set-default SYS_HITL 2
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set SIH_T_MAX 6
 param set SIH_MASS 0.3

ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil

@@ -43,10 +43,6 @@ param set-default CA_SV_CS1_TRQ_P 0.3
 param set-default CA_SV_CS1_TRQ_Y -0.3
 param set-default CA_SV_CS1_TYPE 6
 
-param set-default FW_AIRSPD_MAX 12
-param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 10
-
 param set-default HIL_ACT_FUNC1 101
 param set-default HIL_ACT_FUNC2 102
 param set-default HIL_ACT_FUNC5 202
@@ -63,8 +59,8 @@ param set-default SYS_HITL 2
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
-
-param set-default SENS_DPRES_OFF 0.001
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set SIH_T_MAX 2.0
 param set SIH_Q_MAX 0.0165
@@ -79,5 +75,3 @@ param set SIH_L_ROLL 0.145
 
 # sih as tailsitter
 param set SIH_VEHICLE_TYPE 2
-
-param set-default VT_ARSP_TRANS 6

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -0,0 +1,132 @@
+#!/bin/sh
+#
+# @name Vertical Technologies DeltaQuad
+#
+# @type Standard VTOL
+# @class VTOL
+#
+# @maintainer Sander Smeets <sander@droneslab.com>
+#
+# @output Motor1 motor 1
+# @output Motor2 motor 2
+# @output Motor3 motor 3
+# @output Motor4 motor 4
+# @output Servo1 Right elevon
+# @output Servo2 Left elevon
+# @output Servo3 Pusher motor
+# @output Servo4 Pusher reverse channel
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 22
+
+param set-default BAT1_CAPACITY 23000
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_R_INTERNAL 0.0025
+
+param set-default SYS_HAS_NUM_ASPD 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default EKF2_GPS_POS_X -0.12
+param set-default EKF2_IMU_POS_X -0.12
+
+param set-default FW_USE_AIRSPD 0
+param set-default NPFG_PERIOD 25
+param set-default FW_PR_FF 0.7
+param set-default FW_PR_I 0.18
+param set-default FW_PR_P 0.15
+param set-default FW_P_TC 0.5
+param set-default FW_PSP_OFF 5
+param set-default FW_R_LIM 35
+param set-default FW_RR_FF 0.9
+param set-default FW_RR_I 0.08
+param set-default FW_RR_P 0.18
+param set-default FW_T_CLMB_MAX 3
+param set-default FW_T_SINK_MAX 3
+param set-default FW_T_SINK_MIN 1
+param set-default FW_THR_TRIM 0.70
+param set-default FW_THR_SLEW_MAX 1
+param set-default FW_P_LIM_MAX 15
+param set-default FW_P_LIM_MIN -25
+param set-default FW_P_RMAX_NEG 45
+param set-default FW_P_RMAX_POS 45
+param set-default FW_R_RMAX 50
+param set-default FW_THR_MIN 0.55
+param set-default FW_BAT_SCALE_EN 1
+param set-default FW_T_RLL2THR 20
+
+param set-default MC_ROLLRATE_P 0.16
+param set-default MC_ROLLRATE_I 0.01
+param set-default MC_PITCHRATE_I 0.05
+
+param set-default MC_YAWRATE_MAX 20
+param set-default MC_AIRMODE 1
+
+param set-default MIS_TAKEOFF_ALT 15
+
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_MAX 5
+param set-default MPC_LAND_SPEED 1.2
+param set-default MPC_TILTMAX_LND 35
+param set-default MPC_Z_VEL_MAX_UP 1.5
+param set-default MPC_TKO_RAMP_T 0.8
+param set-default MPC_TILTMAX_AIR 25
+param set-default MPC_TILTMAX_LND 25
+param set-default MPC_YAWRAUTO_MAX 20
+
+param set-default NAV_LOITER_RAD 100
+
+param set-default PWM_MAIN_DIS5 1500
+param set-default PWM_MAIN_DIS6 1500
+param set-default PWM_MAIN_DIS7 900
+param set-default PWM_MAIN_DIS8 900
+
+
+param set-default SENS_BOARD_ROT 18
+
+# TELEM2 config
+param set-default MAV_1_CONFIG 102
+param set-default MAV_1_RATE 5000
+param set-default MAV_1_FORWARD 1
+param set-default SER_TEL2_BAUD 57600
+
+param set-default VT_TYPE 2
+param set-default VT_PITCH_MIN 8
+param set-default VT_FW_QC_P 55
+param set-default VT_FW_QC_R 55
+param set-default VT_TRANS_MIN_TM 15
+param set-default VT_FWD_THRUST_SC 4
+param set-default VT_TRANS_TIMEOUT 22
+
+param set-default COM_RC_OVERRIDE 0
+
+param set-default CA_AIRFRAME 2
+
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_PX 0.2
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -0,0 +1,121 @@
+#!/bin/sh
+#
+# @name BabyShark VTOL
+#
+# @type Standard VTOL
+# @class VTOL
+#
+# @maintainer Silvan Fuhrer <silvan@auterion.com>
+#
+# @output Motor1 motor 1
+# @output Motor2 motor 2
+# @output Motor3 motor 3
+# @output Motor4 motor 4
+# @output Motor5 Pusher motor
+# @output Servo1 Ailerons
+# @output Servo2 A-tail left
+# @output Servo3 A-tail right
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 22
+
+param set-default BAT1_N_CELLS 6
+
+param set-default FW_AIRSPD_MAX 30
+param set-default FW_AIRSPD_MIN 19
+param set-default FW_AIRSPD_TRIM 23
+param set-default FW_PN_R_SLEW_MAX 40
+param set-default FW_PSP_OFF 3
+param set-default FW_P_LIM_MAX 18
+param set-default FW_P_LIM_MIN -25
+param set-default FW_RLL_TO_YAW_FF 0.1
+param set-default FW_RR_P 0.08
+param set-default FW_R_LIM 45
+param set-default FW_R_RMAX 50
+param set-default FW_THR_TRIM 0.65
+param set-default FW_THR_MIN 0.3
+param set-default FW_THR_SLEW_MAX 0.6
+param set-default FW_T_SINK_MAX 15
+param set-default FW_T_SINK_MIN 3
+param set-default FW_YR_P 0.15
+
+param set-default IMU_DGYRO_CUTOFF 15
+param set-default MC_PITCHRATE_MAX 60
+param set-default MC_ROLLRATE_MAX 60
+param set-default MC_YAWRATE_I 0.15
+param set-default MC_YAWRATE_MAX 40
+param set-default MC_YAWRATE_P 0.3
+
+param set-default MC_AIRMODE 1
+param set-default MPC_LAND_SPEED 1
+param set-default MPC_MAN_TILT_MAX 25
+param set-default MPC_MAN_Y_MAX 40
+param set-default MPC_THR_HOVER 0.45
+param set-default MPC_TILTMAX_AIR 25
+param set-default MPC_YAWRAUTO_MAX 40
+param set-default MPC_Z_VEL_MAX_UP 2
+
+param set-default NAV_ACC_RAD 3
+
+param set-default PWM_MAIN_DIS3 1000
+param set-default PWM_MAIN_MIN3 1120
+
+param set-default SENS_BOARD_ROT 4
+
+param set-default VT_ARSP_BLEND 10
+param set-default VT_ARSP_TRANS 21
+param set-default VT_B_DEC_MSS 1.5
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_FWD_THRUST_SC 1.2
+param set-default VT_F_TR_OL_TM 8
+param set-default VT_TRANS_MIN_TM 4
+param set-default VT_TYPE 2
+
+
+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 15
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_R 0
+param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 13
+param set-default CA_SV_CS2_TRQ_P 0.5
+param set-default CA_SV_CS2_TRQ_Y 0.5
+param set-default CA_SV_CS2_TYPE 14
+
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 202
+param set-default PWM_MAIN_FUNC3 105
+param set-default PWM_MAIN_FUNC4 203
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 102
+param set-default PWM_MAIN_FUNC7 103
+param set-default PWM_MAIN_FUNC8 104
+
+param set-default PWM_MAIN_TIM0 50
+param set-default PWM_MAIN_DIS1 1500
+param set-default PWM_MAIN_DIS2 1500
+param set-default PWM_MAIN_DIS4 1500

ROMFS/px4fmu_common/init.d/airframes/18001_TF-B1

@@ -16,6 +16,7 @@
 . ${R}etc/init.d/rc.balloon_defaults
 
 param set-default COM_PREARM_MODE 2  # always in prearm state
+param set-default CBRK_IO_SAFETY 22027
 param set-default SDLOG_PROFILE 17
 param set-default SDLOG_MODE 2
 param set-default MAV_0_MODE 1

ROMFS/px4fmu_common/init.d/airframes/2507_cloudship

@@ -16,6 +16,7 @@
 . ${R}etc/init.d/rc.airship_defaults
 
 param set-default COM_PREARM_MODE 2
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default CA_AIRFRAME 9
 

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -67,6 +67,7 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters
@@ -91,6 +92,9 @@ param set-default BAT1_N_CELLS 4
 param set-default BAT1_A_PER_V 36.364
 param set-default BAT1_V_DIV 18.182
 
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
+
 param set-default THR_MDL_FAC 0.3
 
 # Square quadrotor X PX4 numbering

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -68,6 +68,7 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters
@@ -92,6 +93,9 @@ param set-default BAT1_N_CELLS 4
 param set-default BAT1_A_PER_V 36.364
 param set-default BAT1_V_DIV 18.182
 
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
+
 param set-default THR_MDL_FAC 0.3
 
 # Square quadrotor X PX4 numbering

ROMFS/px4fmu_common/init.d/airframes/4601_droneblocks_dexi_5

@@ -42,16 +42,12 @@ param set-default CA_ROTOR3_PX -0.0762
 param set-default CA_ROTOR3_PY 0.09525
 param set-default CA_ROTOR3_KM -0.05
 
-param set-default PWM_MAIN_TIM0 -3
-param set-default DSHOT_TEL_CFG 104
-
 param set-default EKF2_MIN_RNG 0.01
 param set-default EKF2_OF_POS_X 0.043
 param set-default EKF2_OF_POS_Y 0.011
 param set-default EKF2_OF_QMIN_GND 1
 param set-default EKF2_RNG_POS_X 0.043
 param set-default EKF2_RNG_POS_Y 0.0
-param set-default EKF2_RNG_A_HMAX 25.0
 
 param set-default IMU_GYRO_DNF_EN 2
 
@@ -82,9 +78,3 @@ param set-default SENS_FLOW_MINHGT 0.0
 param set-default SER_TEL2_BAUD 3000000
 
 param set-default UXRCE_DDS_CFG 102
-
-param set-default EKF2_HGT_REF 2
-
-# I saw a very sketchy extreme yaw setpoint that I cant explain
-# https://review.px4.io/plot_app?log=4b69399f-b001-4dc2-acd5-e779fe266799
-param set-default MC_YAWRATE_MAX 100

ROMFS/px4fmu_common/init.d/airframes/50000_generic_ground_vehicle

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name Generic Ground Vehicle (Deprecated)
+# @name Generic Ground Vehicle (Ackermann)
 #
 # @type Rover
 # @class Rover

ROMFS/px4fmu_common/init.d/airframes/50000_generic_rover_differential

@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Rover Differential
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_differential_defaults

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Aion Robotics R1 UGV
-#
-# @url https://www.aionrobotics.com/r1
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-param set-default BAT1_N_CELLS 4
-
-# Set geometry & output configration
-param set-default RBCLW_ADDRESS 128
-param set-default RBCLW_FUNC1 101
-param set-default RBCLW_FUNC2 102
-param set-default RBCLW_REV 1 # reverse right wheels
-
-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAX_ACCEL 3
-param set-default RD_MAX_DECEL 4
-param set-default RD_MAX_JERK 5
-param set-default RD_MAX_SPEED 1.6
-param set-default RD_MAX_THR_SPD 1.9
-param set-default RD_MAX_THR_YAW_R 0.7
-param set-default RD_MAX_YAW_ACCEL 600
-param set-default RD_MAX_YAW_RATE 250
-param set-default RD_MISS_SPD_DEF 1.5
-param set-default RD_SPEED_P 0.1
-param set-default RD_SPEED_I 0.01
-param set-default RD_TRANS_DRV_TRN 0.785398
-param set-default RD_TRANS_TRN_DRV 0.139626
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0.01
-
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover

@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# @name Aion Robotics R1 UGV
+#
+# @url https://www.aionrobotics.com/r1
+#
+# @type Rover
+# @class Rover
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.rover_differential_defaults
+
+param set-default BAT1_N_CELLS 4
+
+param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_ANGERR_INIT 0.01
+
+# Set geometry & output configration
+param set-default RBCLW_ADDRESS 128
+param set-default RBCLW_FUNC1 101
+param set-default RBCLW_FUNC2 102
+param set-default RBCLW_REV 1 # reverse right wheels

ROMFS/px4fmu_common/init.d/airframes/50004_nxpcup_car_dfrobot_gpx

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name NXP Cup car: DF Robot GPX (Deprecated)
+# @name NXP Cup car: DF Robot GPX
 
 #
 # @type Rover

ROMFS/px4fmu_common/init.d/airframes/50010_ackermann_rover_generic

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name Generic Rover Ackermann
+# @name Generic ackermann rover
 #
 # @type Rover
 # @class Rover

ROMFS/px4fmu_common/init.d/airframes/51001_axial_scx10_2_trail_honcho

@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name Axial SCX10 2 Trail Honcho
-#
-# @url https://www.axialadventure.com/product/1-10-scx10-ii-trail-honcho-4wd-rock-crawler-brushed-rtr/AXID9059.html
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_ackermann_defaults
-
-param set-default BAT1_N_CELLS 3
-
-# Rover parameters
-param set-default NAV_ACC_RAD 0.5
-param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 3
-param set-default RA_LAT_ACCEL_I 0.01
-param set-default RA_LAT_ACCEL_P 0.1
-param set-default RA_MAX_ACCEL 1.5
-param set-default RA_MAX_DECEL 10
-param set-default RA_MAX_JERK 20
-param set-default RA_MAX_LAT_ACCEL 3
-param set-default RA_MAX_SPEED 2.5
-param set-default RA_MAX_STR_ANG 0.5236
-param set-default RA_MAX_STR_RATE 270
-param set-default RA_MAX_THR_SPEED 2.8
-param set-default RA_SPEED_I 0.01
-param set-default RA_SPEED_P 0.1
-param set-default RA_WHEEL_BASE 0.321
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_GAIN 1
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1.5

ROMFS/px4fmu_common/init.d/airframes/52000_generic_rover_mecanum

@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Rover Mecanum
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_mecanum_defaults

ROMFS/px4fmu_common/init.d/airframes/60002_uuv_bluerov2_heavy

@@ -23,6 +23,9 @@
 . ${R}etc/init.d/rc.uuv_defaults
 
 
+# companion computer is connected via USB permanently
+param set-default CBRK_IO_SAFETY 22027
+
 param set-default MAV_1_CONFIG 102
 
 param set-default BAT1_A_PER_V 37.8798

ROMFS/px4fmu_common/init.d/airframes/6002_draco_r

@@ -73,6 +73,8 @@ param set-default SENS_EN_PX4FLOW 1
 param set-default SENS_EN_LL40LS 2
 param set-default SENS_FLOW_ROT 2
 
+#
+param set-default CBRK_IO_SAFETY 22027
 param set-default COM_DISARM_LAND 3
 
 # Battery

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -129,39 +129,29 @@ if(CONFIG_MODULES_VTOL_ATT_CONTROL)
 		# [13000, 13999] VTOL
 		13000_generic_vtol_standard
 		13100_generic_vtol_tiltrotor
+		13013_deltaquad
+		13014_vtol_babyshark
 		13030_generic_vtol_quad_tiltrotor
 		13200_generic_vtol_tailsitter
 	)
 endif()
 
-if(CONFIG_MODULES_ROVER_DIFFERENTIAL)
+if(CONFIG_MODULES_ROVER_POS_CONTROL)
 	px4_add_romfs_files(
-		# [50000, 50999] Differential rovers
-		50000_generic_rover_differential
-		50001_aion_robotics_r1_rover
+		50000_generic_ground_vehicle
+		50004_nxpcup_car_dfrobot_gpx
+	)
+endif()
+
+if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
+	px4_add_romfs_files(
+		50003_aion_robotics_r1_rover
 	)
 endif()
 
 if(CONFIG_MODULES_ROVER_ACKERMANN)
 	px4_add_romfs_files(
-		# [51000, 51999] Ackermann rovers
-		51000_generic_rover_ackermann
-		51001_axial_scx10_2_trail_honcho
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_MECANUM)
-	px4_add_romfs_files(
-		# [52000, 52999] Mecanum rovers
-		52000_generic_rover_mecanum
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_POS_CONTROL)
-	px4_add_romfs_files(
-		# [59000, 59999] Rover position control (deprecated)
-		59000_generic_ground_vehicle
-		59001_nxpcup_car_dfrobot_gpx
+		50010_ackermann_rover_generic
 	)
 endif()
 

ROMFS/px4fmu_common/init.d/rc.rover_ackermann_apps

@@ -1,7 +1,7 @@
 #!/bin/sh
-# Standard apps for an ackermann rover.
+# Standard apps for a ackermann drive rover.
 
-# Start rover ackermann module.
+# Start rover ackermann drive controller.
 rover_ackermann start
 
 # Start Land Detector.

ROMFS/px4fmu_common/init.d/rc.rover_ackermann_defaults

@@ -2,10 +2,12 @@
 # Ackermann rover parameters.
 
 set VEHICLE_TYPE rover_ackermann
-param set-default MAV_TYPE 10           # MAV_TYPE_GROUND_ROVER
-param set-default CA_AIRFRAME 5         # Rover (Ackermann)
-param set-default CA_R_REV 1            # Motor is assumed to be reversible
-param set-default EKF2_MAG_TYPE 1       # Make sure magnetometer is fused even when not flying
-param set-default NAV_ACC_RAD 0.5       # Waypoint acceptance radius
+param set-default MAV_TYPE 10 # MAV_TYPE_GROUND_ROVER
+param set-default CA_AIRFRAME 5 # Rover (Ackermann)
+param set-default CA_R_REV 1 # Motor is assumed to be reversible
+param set-default EKF2_MAG_TYPE 1 # make sure magnetometer is fused even when not flying
 param set-default EKF2_GBIAS_INIT 0.01
 param set-default EKF2_ANGERR_INIT 0.01
+param set-default NAV_ACC_RAD 0.5 # Waypoint acceptance radius
+param set-default NAV_RCL_ACT 6 # Disarm on manual control loss
+param set-default COM_FAIL_ACT_T 1 # Delay before failsafe after rc loss

ROMFS/px4fmu_common/init.d/rc.rover_differential_apps

@@ -1,8 +1,8 @@
 #!/bin/sh
-# Standard apps for a differential rover.
+# Standard apps for a differential drive rover.
 
-# Start rover differential module.
-rover_differential start
+# Start rover differential drive controller.
+differential_drive start
 
 # Start Land Detector.
 land_detector start rover

ROMFS/px4fmu_common/init.d/rc.rover_differential_defaults

@@ -2,10 +2,10 @@
 # Differential rover parameters.
 
 set VEHICLE_TYPE rover_differential
-param set-default MAV_TYPE 10           # MAV_TYPE_GROUND_ROVER
-param set-default CA_AIRFRAME 6         # Rover (Differential)
-param set-default CA_R_REV 3            # Right and left motors reversible
-param set-default EKF2_MAG_TYPE 1       # Make sure magnetometer is fused even when not flying
-param set-default NAV_ACC_RAD 0.5       # Waypoint acceptance radius
-param set-default EKF2_GBIAS_INIT 0.01
-param set-default EKF2_ANGERR_INIT 0.01
+
+param set-default MAV_TYPE 10 # MAV_TYPE_GROUND_ROVER
+
+param set-default CA_AIRFRAME 6 # Rover (Differential)
+param set-default CA_R_REV 3 # Right and left motors reversible
+
+param set-default EKF2_MAG_TYPE 1 # make sure magnetometer is fused even when not flying

ROMFS/px4fmu_common/init.d/rc.rover_mecanum_apps

@@ -1,8 +0,0 @@
-#!/bin/sh
-# Standard apps for a mecanum drive rover.
-
-# Start rover mecanum drive controller.
-rover_mecanum start
-
-# Start Land Detector.
-land_detector start rover

ROMFS/px4fmu_common/init.d/rc.rover_mecanum_defaults

@@ -1,11 +0,0 @@
-#!/bin/sh
-# Mecanum rover parameters.
-
-set VEHICLE_TYPE rover_mecanum
-param set-default MAV_TYPE 10     # MAV_TYPE_GROUND_ROVER
-param set-default CA_AIRFRAME 13  # Rover (Mecanum)
-param set-default CA_R_REV 15     # Right and left motors reversible
-param set-default EKF2_MAG_TYPE 1 # make sure magnetometer is fused even when not flying
-param set-default NAV_ACC_RAD 0.5 # Waypoint acceptance radius
-param set-default EKF2_GBIAS_INIT 0.01
-param set-default EKF2_ANGERR_INIT 0.01

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -184,13 +184,6 @@ then
 	asp5033 start -X
 fi
 
-# AUAV absolute/differential pressure sensor external I2C
-if param greater -s SENS_EN_AUAVX 0
-then
-	auav start -D -X
-	auav start -A -X
-fi
-
 # SHT3x temperature and hygrometer sensor, external I2C
 if param compare -s SENS_EN_SHT3X 1
 then

ROMFS/px4fmu_common/init.d/rc.vehicle_setup

@@ -50,15 +50,6 @@ then
 	. ${R}etc/init.d/rc.rover_ackermann_apps
 fi
 
-#
-# Mecanum Rover setup.
-#
-if [ $VEHICLE_TYPE = rover_mecanum ]
-then
-	# Start mecanum drive rover apps.
-	. ${R}etc/init.d/rc.rover_mecanum_apps
-fi
-
 #
 # VTOL setup.
 #

ROMFS/px4fmu_common/init.d/rcS

@@ -30,7 +30,7 @@ set LOGGER_BUF 8
 set PARAM_FILE ""
 set PARAM_BACKUP_FILE ""
 set RC_INPUT_ARGS ""
-set STORAGE_AVAILABLE no
+set SDCARD_AVAILABLE no
 set SDCARD_EXT_PATH /fs/microsd/ext_autostart
 set SDCARD_FORMAT no
 set STARTUP_TUNE 1
@@ -62,11 +62,11 @@ then
 			umount /fs/microsd
 
 		else
-			set STORAGE_AVAILABLE yes
+			set SDCARD_AVAILABLE yes
 		fi
 	fi
 
-	if [ $STORAGE_AVAILABLE = no -o $SDCARD_FORMAT = yes ]
+	if [ $SDCARD_AVAILABLE = no -o $SDCARD_FORMAT = yes ]
 	then
 		echo "INFO [init] formatting /dev/mmcsd0"
 		set STARTUP_TUNE 15 # tune 15 = SD_ERROR (overridden to SD_INIT if format + mount succeeds)
@@ -77,7 +77,7 @@ then
 
 			if mount -t vfat /dev/mmcsd0 /fs/microsd
 			then
-				set STORAGE_AVAILABLE yes
+				set SDCARD_AVAILABLE yes
 				set STARTUP_TUNE 14 # tune 14 = SD_INIT
 			else
 				echo "ERROR [init] card mount failed"
@@ -86,22 +86,16 @@ then
 			echo "ERROR [init] format failed"
 		fi
 	fi
-else
-	# Is there a device mounted for storage
-	if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/microsd
-	then
-		set STORAGE_AVAILABLE yes
-	fi
-fi
 
-if [ $STORAGE_AVAILABLE = yes ]
-then
-	if hardfault_log check
+	if [ $SDCARD_AVAILABLE = yes ]
 	then
-		set STARTUP_TUNE 2 # tune 2 = ERROR_TUNE
-		if hardfault_log commit
+		if hardfault_log check
 		then
-			hardfault_log reset
+			set STARTUP_TUNE 2 # tune 2 = ERROR_TUNE
+			if hardfault_log commit
+			then
+				hardfault_log reset
+			fi
 		fi
 	fi
 
@@ -178,7 +172,7 @@ else
 		fi
 	fi
 
-	if [ $STORAGE_AVAILABLE = yes ]
+	if [ $SDCARD_AVAILABLE = yes ]
 	then
 		param select-backup $PARAM_BACKUP_FILE
 	fi
@@ -226,8 +220,8 @@ else
 
 		if [ ${VEHICLE_TYPE} == none ]
 		then
-			# Use external startup file
-			if [ $STORAGE_AVAILABLE = yes ]
+			# Look for airframe on SD card
+			if [ $SDCARD_AVAILABLE = yes ]
 			then
 				. ${R}etc/init.d/rc.autostart_ext
 			else
@@ -621,7 +615,7 @@ unset PARAM_FILE
 unset PARAM_BACKUP_FILE
 unset PARAM_DEFAULTS_VER
 unset RC_INPUT_ARGS
-unset STORAGE_AVAILABLE
+unset SDCARD_AVAILABLE
 unset SDCARD_EXT_PATH
 unset SDCARD_FORMAT
 unset STARTUP_TUNE

Tools/astyle/files_to_check_code_style.sh

@@ -11,7 +11,7 @@ exec find boards msg src platforms test \
     -path platforms/nuttx/NuttX -prune -o \
     -path platforms/qurt/dspal -prune -o \
     -path src/drivers/ins/vectornav/libvnc -prune -o \
-    -path src/drivers/uavcan/libdronecan -prune -o \
+    -path src/drivers/uavcan/libuavcan -prune -o \
     -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
     -path src/drivers/cyphal/libcanard -prune -o \
     -path src/lib/crypto/monocypher -prune -o \
@@ -32,5 +32,4 @@ exec find boards msg src platforms test \
     -path src/lib/cdrstream/rosidl -prune -o \
     -path src/modules/zenoh/zenoh-pico -prune -o \
     -path boards/modalai/voxl2/libfc-sensor-api -prune -o \
-    -path src/drivers/actuators/vertiq_io/iq-module-communication-cpp -prune -o \
     \( -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) -print \) | grep $PATTERN

Tools/ci/build_all_runner.sh

@@ -1,19 +0,0 @@
-#!/bin/bash
-# This script is meant to be used by the build_all.yml workflow in a github runner
-# Please only modify if you know what you are doing
-set -e
-
-echo "### :clock1: Build Times" >> $GITHUB_STEP_SUMMARY
-targets=$1
-for target in ${targets//,/ }
-do
-    echo "::group::Building: [${target}]"
-    start=$(date +%s)
-    make $target
-    stop=$(date +%s)
-    diff=$(($stop-$start))
-    build_time="$(($diff /60/60))h $(($diff /60))m $(($diff % 60))s elapsed"
-    echo -e "\033[0;32mBuild Time: [$build_time]"
-    echo "* **$target** - $build_time" >> $GITHUB_STEP_SUMMARY
-    echo "::endgroup::"
-done

Tools/ci/package_build_artifacts.sh

@@ -1,46 +0,0 @@
-#!/bin/bash
-
-mkdir artifacts
-cp **/**/*.px4 artifacts/
-cp **/**/*.elf artifacts/
-for build_dir_path in build/*/ ; do
-  build_dir=${build_dir_path#*/}
-  build_dir=${build_dir::${#build_dir}-1}
-  mkdir artifacts/$build_dir
-  find artifacts/ -maxdepth 1 -type f -name "*$build_dir*"
-  # Airframe
-  cp $build_dir_path/airframes.xml artifacts/$build_dir/
-  # Parameters
-  cp $build_dir_path/parameters.xml artifacts/$build_dir/
-  cp $build_dir_path/parameters.json artifacts/$build_dir/
-  cp $build_dir_path/parameters.json.xz artifacts/$build_dir/
-  # Actuators
-  cp $build_dir_path/actuators.json artifacts/$build_dir/
-  cp $build_dir_path/actuators.json.xz artifacts/$build_dir/
-  # Events
-  cp $build_dir_path/events/all_events.json.xz artifacts/$build_dir/
-  # ROS 2 msgs
-  cp $build_dir_path/events/all_events.json.xz artifacts/$build_dir/
-  # Module Docs
-  ls -la artifacts/$build_dir
-  echo "----------"
-done
-
-# general metadata
-mkdir artifacts/_general/
-cp artifacts/px4_sitl_default/airframes.xml artifacts/_general/
-# Airframe
-cp artifacts/px4_sitl_default/airframes.xml artifacts/_general/
-# Parameters
-cp artifacts/px4_sitl_default/parameters.xml artifacts/_general/
-cp artifacts/px4_sitl_default/parameters.json artifacts/_general/
-cp artifacts/px4_sitl_default/parameters.json.xz artifacts/_general/
-# Actuators
-cp artifacts/px4_sitl_default/actuators.json artifacts/_general/
-cp artifacts/px4_sitl_default/actuators.json.xz artifacts/_general/
-# Events
-cp artifacts/px4_sitl_default/events/all_events.json.xz artifacts/_general/
-# ROS 2 msgs
-cp artifacts/px4_sitl_default/events/all_events.json.xz artifacts/_general/
-# Module Docs
-ls -la artifacts/_general/

Tools/ci_build_all_runner.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+# This script is meant to be used by the build_all.yml workflow in a github runner
+# Please only modify if you know what you are doing
+set -e
+
+targets=$1
+for target in ${targets//,/ }
+do
+    echo "::group::Building: [${target}]"
+    make $target
+    echo "::endgroup::"
+done

Tools/generate_board_targets_json.py

@@ -25,16 +25,10 @@ parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
                     help='Pretty output instead of a single line')
 parser.add_argument('-g', '--groups', dest='group', action='store_true',
                     help='Groups targets')
-parser.add_argument('-f', '--filter', dest='filter', help='comma separated list of board names to use instead of all')
 
 args = parser.parse_args()
 verbose = args.verbose
 
-board_filter = []
-if args.filter:
-    for board in args.filter.split(','):
-        board_filter.append(board)
-
 build_configs = []
 grouped_targets = {}
 excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
@@ -46,23 +40,7 @@ excluded_labels = [
     'uavcanv1', # TODO: fix and enable
     ]
 
-github_action_config = { 'include': build_configs }
-extra_args = {}
-if args.pretty:
-    extra_args['indent'] = 2
-
-def chunks(arr, size):
-    # splits array into parts
-    for i in range(0, len(arr), size):
-        yield arr[i:i + size]
-
-def comma_targets(targets):
-    # turns array of targets into a comma split string
-    return ",".join(targets)
-
 def process_target(px4board_file, target_name):
-    # reads through the board file and grabs
-    # useful information for building
     ret = None
     platform = None
     toolchain = None
@@ -111,25 +89,7 @@ def process_target(px4board_file, target_name):
 
     return ret
 
-# Look for board targets in the ./boards directory
-if(verbose):
-    print("=======================")
-    print("= scanning for boards =")
-    print("=======================")
-
-# We also need to build metadata
-# includes:
-# - Airframe
-# - Parameters
-# - Events
-metadata_targets = ['airframe_metadata', 'parameters_metadata', 'extract_events']
-grouped_targets['base'] = {}
-grouped_targets['base']['container'] = 'px4io/px4-dev-base-focal:2021-09-08'
-grouped_targets['base']['manufacturers'] = {}
-grouped_targets['base']['manufacturers']['px4'] = []
-grouped_targets['base']['manufacturers']['px4'] += metadata_targets
-
-for manufacturer in os.scandir(os.path.join(source_dir, '../boards')):
+for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
     if not manufacturer.is_dir():
         continue
     if manufacturer.name in excluded_manufacturers:
@@ -147,10 +107,6 @@ for manufacturer in os.scandir(os.path.join(source_dir, '../boards')):
                 label = files.name[:-9]
                 target_name = manufacturer.name + '_' + board.name + '_' + label
 
-                if board_filter and not board_name in board_filter:
-                    if verbose: print(f'excluding board {board_name} ({target_name})')
-                    continue
-
                 if board_name in excluded_boards:
                     if verbose: print(f'excluding board {board_name} ({target_name})')
                     continue
@@ -159,139 +115,103 @@ for manufacturer in os.scandir(os.path.join(source_dir, '../boards')):
                     if verbose: print(f'excluding label {label} ({target_name})')
                     continue
                 target = process_target(files.path, target_name)
+
                 if (args.group and target is not None):
                     if (target['arch'] not in grouped_targets):
                         grouped_targets[target['arch']] = {}
                         grouped_targets[target['arch']]['container'] = target['container']
                         grouped_targets[target['arch']]['manufacturers'] = {}
                     if(manufacturer.name not in grouped_targets[target['arch']]['manufacturers']):
+                        grouped_targets[target['arch']]['manufacturers'][manufacturer.name] = {}
                         grouped_targets[target['arch']]['manufacturers'][manufacturer.name] = []
                     grouped_targets[target['arch']]['manufacturers'][manufacturer.name].append(target_name)
                 if target is not None:
                     build_configs.append(target)
 
-if(verbose):
-    import pprint
-    print("============================")
-    print("= Boards found in ./boards =")
-    print("============================")
-    pprint.pp(grouped_targets)
+def comma_targets(targets):
+    return ",".join(targets)
 
-if(verbose):
-    print("===================")
-    print("= Generating JSON =")
-    print("===================")
+github_action_config = { 'include': build_configs }
+extra_args = {}
+if args.pretty:
+    extra_args['indent'] = 2
 
 if (args.group):
-    # if we are using this script for grouping builds
-    # we loop trough the manufacturers list and split their targets
-    # if a manufacturer has more than a LIMIT of boards then we split that
-    # into sub groups such as "arch-manufacturer name-index"
-    # example:
-    #   nuttx-px4-0
-    #   nuttx-px4-1
-    #   nuttx-px4-2
-    #   nuttx-ark-0
-    #   nuttx-ark-1
-    # if the manufacturer doesn't have more targets than LIMIT then we add
-    # them to a generic group with the following structure "arch-index"
-    # example:
-    #   nuttx-0
-    #   nuttx-1
-    final_groups = []
-    last_man = ''
-    last_arch = ''
-    SPLIT_LIMIT = 10
-    LOWER_LIMIT = 5
-    if(verbose):
-        print(f'=:Architectures: [{grouped_targets.keys()}]')
-    for arch in grouped_targets:
-        if(verbose):
-            print(f'=:Processing: [{arch}]')
-        temp_group = []
-        for man in grouped_targets[arch]['manufacturers']:
-            if(verbose):
-                print(f'=:Processing: [{arch}][{man}]')
-            man_len = len(grouped_targets[arch]['manufacturers'][man])
-            if(man_len > LOWER_LIMIT and man_len < (SPLIT_LIMIT + 1)):
-                # Manufacturers can have their own group
-                if(verbose):
-                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers can have their own group')
-                group_name = arch + "-" + man
-                targets = comma_targets(grouped_targets[arch]['manufacturers'][man])
-                final_groups.append({
-                    "container": grouped_targets[arch]['container'],
-                    "targets": targets,
-                    "arch": arch,
-                    "group": group_name,
-                    "len": len(grouped_targets[arch]['manufacturers'][man])
-                })
-            elif(man_len >= (SPLIT_LIMIT + 1)):
-                # Split big man groups into subgroups
-                # example: Pixhawk
-                if(verbose):
-                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers has multiple own groups')
-                chunk_limit = SPLIT_LIMIT
-                chunk_counter = 0
-                for chunk in chunks(grouped_targets[arch]['manufacturers'][man], chunk_limit):
-                    group_name = arch + "-" + man + "-" + str(chunk_counter)
-                    targets = comma_targets(chunk)
-                    final_groups.append({
-                        "container": grouped_targets[arch]['container'],
-                        "targets": targets,
-                        "arch": arch,
-                        "group": group_name,
-                        "len": len(chunk),
-                    })
-                    chunk_counter += 1
-            else:
-                if(verbose):
-                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers too small group with others')
-                temp_group.extend(grouped_targets[arch]['manufacturers'][man])
-
-        temp_len = len(temp_group)
-        chunk_counter = 0
-        if(temp_len > 0 and temp_len < (SPLIT_LIMIT + 1)):
-            if(verbose):
-                print(f'=:Processing: [{arch}][orphan][{temp_len}]==Leftover arch can have their own group')
-            group_name = arch + "-" + str(chunk_counter)
-            targets = comma_targets(temp_group)
-            final_groups.append({
-                "container": grouped_targets[arch]['container'],
-                "targets": targets,
-                "arch": arch,
-                "group": group_name,
-                "len": temp_len
-            })
-        elif(temp_len >= (SPLIT_LIMIT + 1)):
-            # Split big man groups into subgroups
-            # example: Pixhawk
-            if(verbose):
-                print(f'=:Processing: [{arch}][orphan][{temp_len}]==Leftover arch can has multpile group')
-            chunk_limit = SPLIT_LIMIT
-            chunk_counter = 0
-            for chunk in chunks(temp_group, chunk_limit):
-                group_name = arch + "-" + str(chunk_counter)
-                targets = comma_targets(chunk)
-                final_groups.append({
-                    "container": grouped_targets[arch]['container'],
-                    "targets": targets,
-                    "arch": arch,
-                    "group": group_name,
-                    "len": len(chunk),
-                })
-                chunk_counter += 1
     if(verbose):
         import pprint
-        print("================")
-        print("= final_groups =")
-        print("================")
+        pprint.pp(grouped_targets)
+    final_groups = []
+    temp_group = []
+    group_number = {}
+    last_man = ''
+    last_arch = ''
+    for arch in grouped_targets:
+        if(last_arch == ''):
+            last_arch = arch
+        if(arch not in group_number):
+                group_number[arch] = 0
+
+        if verbose: print('arch:', arch, ' - last_arch:', last_arch)
+        if(last_arch != arch and len(temp_group) > 0):
+            group_name = last_arch + "-" + str(group_number[last_arch])
+            group_number[last_arch] += 1
+            targets = comma_targets(temp_group)
+            if verbose: print("Append-1: [", group_name, "]", targets)
+            final_groups.append({
+                "container": grouped_targets[last_arch]['container'],
+                "targets": targets,
+                "arch": last_arch,
+                "group": group_name
+            })
+            last_arch = arch
+            temp_group = []
+        for man in grouped_targets[arch]['manufacturers']:
+            for tar in grouped_targets[arch]['manufacturers'][man]:
+                if(last_man != man):
+                    if(len(grouped_targets[arch]['manufacturers'][man]) > 5):
+                        group_name = arch + "-" + man
+                        targets = comma_targets(grouped_targets[arch]['manufacturers'][man])
+                        last_man = man
+                        if verbose: print("Append-2: [", group_name , "]", " - ", targets)
+                        final_groups.append({
+                            "container": grouped_targets[arch]['container'],
+                            "targets": targets,
+                            "arch": arch,
+                            "group": group_name
+                        })
+                    else:
+                        temp_group.append(tar)
+                        if verbose: print('Temp(', len(temp_group), '):[', man, '][', arch, ':', last_arch, ']: ', tar)
+
+            if(last_arch != arch and len(temp_group) > 0):
+                group_name = last_arch + "-" + str(group_number[last_arch])
+                group_number[last_arch] += 1
+                targets = comma_targets(temp_group)
+                if verbose: print("Append-4: [", group_name, "]", targets)
+                final_groups.append({
+                    "container": grouped_targets[last_arch]['container'],
+                    "targets": targets,
+                    "arch": last_arch,
+                    "group": group_name
+                })
+                last_arch = arch
+                temp_group = []
+            if(len(temp_group) > 4):
+                group_name = arch + "-" + str(group_number[arch])
+                last_arch = arch
+                group_number[arch] += 1
+                targets = comma_targets(temp_group)
+                if verbose: print("Append-3: [", group_name, "]", " - ", targets)
+                final_groups.append({
+                    "container": grouped_targets[arch]['container'],
+                    "targets": targets,
+                    "arch": arch,
+                    "group": group_name
+                })
+                temp_group = []
+    if(verbose):
+        import pprint
         pprint.pp(final_groups)
-
-        print("===============")
-        print("= JSON output =")
-        print("===============")
-
     print(json.dumps({ "include": final_groups }, **extra_args))
 else:
     print(json.dumps(github_action_config, **extra_args))

Tools/px4moduledoc/srcparser.py

@@ -442,7 +442,7 @@ class SourceParser(object):
                    re.findall(r"\bstrcmp\b.*\bverb\b.*\"(.+)\"", contents)
 
         doc_commands = module_doc.all_commands() + \
-                [x for value in module_doc.all_values() for x in value.replace(' ', '|').split('|')]
+                [x for value in module_doc.all_values() for x in value.split('|')]
 
         for command in commands:
             if len(command) == 2 and command[0] == '-':

Tools/px_uploader.py

@@ -428,8 +428,7 @@ class uploader:
 
         percent = (float(progress) / float(maxVal)) * 100.0
 
-        redraw = "\r" if sys.stdout.isatty() else "\n"
-        sys.stdout.write("%s%s: [%-20s] %.1f%%" % (redraw, label, '='*int(percent/5.0), percent))
+        sys.stdout.write("\r%s: [%-20s] %.1f%%" % (label, '='*int(percent/5.0), percent))
         sys.stdout.flush()
 
     # send the CHIP_ERASE command and wait for the bootloader to become ready

Tools/setup/Dockerfile

@@ -1,31 +0,0 @@
-# PX4 base development environment
-FROM ubuntu:24.04
-LABEL maintainer="Daniel Agar <daniel@agar.ca>, Ramon Roche <mrpollo@gmail.com>"
-
-ENV DEBIAN_FRONTEND=noninteractive
-ENV LANG=C.UTF-8
-ENV LC_ALL=C.UTF-8
-ENV DISPLAY=:99
-ENV TERM=xterm
-ENV TZ=UTC
-
-# SITL UDP PORTS
-EXPOSE 14556/udp
-EXPOSE 14557/udp
-
-COPY docker-entrypoint.sh /usr/local/bin/docker-entrypoint.sh
-
-# Install PX4 Requirements
-COPY requirements.txt /tmp/requirements.txt
-COPY ubuntu.sh /tmp/ubuntu.sh
-RUN touch /.dockerenv
-RUN bash /tmp/ubuntu.sh --no-sim-tools
-
-RUN git config --global --add safe.directory '*'
-
-# create user with id 1001 (jenkins docker workflow default)
-RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
-
-ENTRYPOINT ["/usr/local/bin/docker-entrypoint.sh"]
-
-CMD ["/bin/bash"]

Tools/setup/docker-entrypoint.sh

@@ -1,33 +0,0 @@
-#!/bin/bash
-
-echo "[docker-entrypoint.sh] Starting entrypoint"
-# Start virtual X server in the background
-# - DISPLAY default is :99, set in dockerfile
-# - Users can override with `-e DISPLAY=` in `docker run` command to avoid
-#   running Xvfb and attach their screen
-if [[ -x "$(command -v Xvfb)" && "$DISPLAY" == ":99" ]]; then
-	echo "[docker-entrypoint.sh] Starting Xvfb"
-	Xvfb :99 -screen 0 1600x1200x24+32 &
-fi
-
-# Check if the ROS_DISTRO is passed and use it
-# to source the ROS environment
-if [ -n "${ROS_DISTRO}" ]; then
-	echo "[docker-entrypoint.sh] ROS: ${ROS_DISTRO}"
-	source "/opt/ros/$ROS_DISTRO/setup.bash"
-fi
-
-echo "[docker-entrypoint.sh] Working Directory: ${pwd}"
-
-# Use the LOCAL_USER_ID if passed in at runtime
-if [ -n "${LOCAL_USER_ID}" ]; then
-	echo "[docker-entrypoint.sh] Starting with: $LOCAL_USER_ID:user"
-	# modify existing user's id
-	usermod -u $LOCAL_USER_ID user
-
-	# run as user
-	# exec gosu user "$@"
-	exec "$@"
-else
-	exec "$@"
-fi

Tools/setup/requirements.txt

@@ -1,7 +1,7 @@
 argcomplete
 cerberus
 coverage
-empy>=3.3,<4
+empy==3.3.4
 future
 jinja2>=2.8
 jsonschema

Tools/setup/ubuntu.sh

@@ -2,7 +2,7 @@
 
 set -e
 
-## Bash script to setup PX4 development environment on Ubuntu LTS (24.04, 22.04).
+## Bash script to setup PX4 development environment on Ubuntu LTS (22.04, 20.04, 18.04).
 ## Can also be used in docker.
 ##
 ## Installs:
@@ -33,9 +33,7 @@ if [ -f /.dockerenv ]; then
 	apt-get --quiet -y update && DEBIAN_FRONTEND=noninteractive apt-get --quiet -y install \
 		ca-certificates \
 		gnupg \
-		gosu \
-		lsb-release \
-		software-properties-common \
+		lsb-core \
 		sudo \
 		wget \
 		;
@@ -55,7 +53,23 @@ fi
 # check ubuntu version
 # otherwise warn and point to docker?
 UBUNTU_RELEASE="`lsb_release -rs`"
-echo "Ubuntu ${UBUNTU_RELEASE}"
+
+if [[ "${UBUNTU_RELEASE}" == "14.04" ]]; then
+	echo "Ubuntu 14.04 is no longer supported"
+	exit 1
+elif [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
+	echo "Ubuntu 16.04 is no longer supported"
+	exit 1
+elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+	echo "Ubuntu 18.04"
+elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+	echo "Ubuntu 20.04"
+elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+	echo "Ubuntu 22.04"
+elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+	echo "Linux Mint 21.3"
+fi
+
 
 echo
 echo "Installing PX4 general dependencies"
@@ -64,7 +78,6 @@ sudo apt-get update -y --quiet
 sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 	astyle \
 	build-essential \
-	ccache \
 	cmake \
 	cppcheck \
 	file \
@@ -73,7 +86,7 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 	gdb \
 	git \
 	lcov \
-	libssl-dev \
+	libfuse2 \
 	libxml2-dev \
 	libxml2-utils \
 	make \
@@ -92,17 +105,12 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 # Python3 dependencies
 echo
 echo "Installing PX4 Python3 dependencies"
-PYTHON_VERSION=$(python3 --version 2>&1 | awk '{print $2}')
-REQUIRED_VERSION="3.11"
-if [[ "$(printf '%s\n' "$REQUIRED_VERSION" "$PYTHON_VERSION" | sort -V | head -n1)" == "$REQUIRED_VERSION" ]]; then
-	python3 -m pip install --break-system-packages -r ${DIR}/requirements.txt
+if [ -n "$VIRTUAL_ENV" ]; then
+	# virtual environments don't allow --user option
+	python -m pip install -r ${DIR}/requirements.txt
 else
-	if [ -n "$VIRTUAL_ENV" ]; then
-		# virtual environments don't allow --user option
-		python -m pip install -r ${DIR}/requirements.txt
-	else
-		python3 -m pip install --user -r ${DIR}/requirements.txt
-	fi
+	# older versions of Ubuntu require --user option
+	python3 -m pip install --user -r ${DIR}/requirements.txt
 fi
 
 # NuttX toolchain (arm-none-eabi-gcc)
@@ -118,26 +126,21 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		build-essential \
 		flex \
 		g++-multilib \
-		gcc-arm-none-eabi \
 		gcc-multilib \
 		gdb-multiarch \
 		genromfs \
 		gettext \
 		gperf \
-		kconfig-frontends \
 		libelf-dev \
 		libexpat-dev \
 		libgmp-dev \
 		libisl-dev \
 		libmpc-dev \
 		libmpfr-dev \
-		libncurses-dev \
-		libncurses6 \
-		libncursesw6 \
-		libnewlib-arm-none-eabi \
-		libstdc++-arm-none-eabi-newlib \
+		libncurses5 \
+		libncurses5-dev \
+		libncursesw5-dev \
 		libtool \
-		libunwind-dev \
 		pkg-config \
 		screen \
 		texinfo \
@@ -145,11 +148,46 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		util-linux \
 		vim-common \
 		;
+	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" || "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+		kconfig-frontends \
+		;
+	fi
+
 
 	if [ -n "$USER" ]; then
 		# add user to dialout group (serial port access)
 		sudo usermod -aG dialout $USER
 	fi
+
+	# arm-none-eabi-gcc
+	NUTTX_GCC_VERSION="9-2020-q2-update"
+	NUTTX_GCC_VERSION_SHORT="9-2020q2"
+
+	source $HOME/.profile # load changed path for the case the script is reran before relogin
+	if [ $(which arm-none-eabi-gcc) ]; then
+		GCC_VER_STR=$(arm-none-eabi-gcc --version)
+		GCC_FOUND_VER=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}" || true)
+	fi
+
+	if [[ "$GCC_FOUND_VER" == "1" ]]; then
+		echo "arm-none-eabi-gcc-${NUTTX_GCC_VERSION} found, skipping installation"
+
+	else
+		echo "Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
+		wget -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
+			sudo tar -jxf /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 -C /opt/;
+
+		# add arm-none-eabi-gcc to user's PATH
+		exportline="export PATH=/opt/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}/bin:\$PATH"
+
+		if grep -Fxq "$exportline" $HOME/.profile; then
+			echo "${NUTTX_GCC_VERSION} path already set.";
+		else
+			echo $exportline >> $HOME/.profile;
+			source $HOME/.profile; # Allows to directly build NuttX targets in the same terminal
+		fi
+	fi
 fi
 
 # Simulation tools
@@ -163,8 +201,51 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		bc \
 		;
 
+	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+		java_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+		java_version=13
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		java_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		java_version=11
+	else
+		java_version=14
+	fi
+	# Java (jmavsim)
+	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+		ant \
+		openjdk-$java_version-jre \
+		openjdk-$java_version-jdk \
+		libvecmath-java \
+		;
+
+	# Set Java 11 as default
+	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
+
 	# Gazebo / Gazebo classic installation
-	if [[ "${UBUNTU_RELEASE}" == "18.04" || "${UBUNTU_RELEASE}" == "20.04" ]]; then
+	if [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		echo "Gazebo (Garden) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+		sudo apt-get update -y --quiet
+
+		# Install Gazebo
+		gazebo_packages="gz-garden"
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		echo "Gazebo (Garden) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+
+		sudo apt-get update -y --quiet
+
+		# Install Gazebo
+		gazebo_packages="gz-garden"
+	else
 		sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 		wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 		# Update list, since new gazebo-stable.list has been added
@@ -179,32 +260,6 @@ if [[ $INSTALL_SIM == "true" ]]; then
 			gazebo_classic_version=11
 			gazebo_packages="gazebo$gazebo_classic_version libgazebo$gazebo_classic_version-dev"
 		fi
-	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		echo "Gazebo (Garden) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-garden"
-	else
-		# Expects Ubuntu 22.04 > by default
-		echo "Gazebo (Harmonic) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-harmonic libunwind-dev"
-
-		if [[ "${UBUNTU_RELEASE}" == "24.04" ]]; then
-			gazebo_packages="$gazebo_packages cppzmq-dev"
-		fi
 	fi
 
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -230,3 +285,8 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	fi
 
 fi
+
+if [[ $INSTALL_NUTTX == "true" ]]; then
+	echo
+	echo "Relogin or reboot computer before attempting to build NuttX targets"
+fi

Tools/teensy_uploader.py

@@ -1,181 +0,0 @@
-#!/usr/bin/env python3
-############################################################################
-#
-#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-#
-# Serial firmware uploader for the Teensy
-
-import sys
-import argparse
-import time
-import sys
-import usb.core
-import subprocess
-
-from sys import platform as _platform
-from pymavlink import mavutil
-
-try:
-    import serial
-except ImportError as e:
-    print("Failed to import serial: " + str(e))
-    print("")
-    print("You may need to install it using:")
-    print("    pip3 install --user pyserial")
-    print("")
-    sys.exit(1)
-
-# Define time to use time.time() by default
-def _time():
-    return time.time()
-
-class uploader(object):
-
-    def __init__(self, portname):
-        self.mavlink = mavutil.mavlink_connection(portname)
-
-    def send_reboot(self):
-        try:
-            self.mavlink.wait_heartbeat()
-            self.mavlink.reboot_autopilot(True)
-        except:
-            pass
-        return True
-
-TEENSY_BL_VENDORID = 0x16c0
-TEENSY_BL_PRODUCTID = 0x0478
-
-def main():
-    # Parse commandline arguments
-    parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
-    parser.add_argument('--port', action="store", required=True, help="Comma-separated list of serial port(s) to which the FMU may be attached")
-    parser.add_argument('--force', action='store_true', default=False, help='Override board type check, or silicon errata checks and continue loading')
-    parser.add_argument('--boot-delay', type=int, default=None, help='minimum boot delay to store in flash')
-    parser.add_argument('--vendor-id', type=lambda x: int(x,0), default=None, help='PX4 USB vendorid')
-    parser.add_argument('--product-id', type=lambda x: int(x,0), default=None, help='PX4 USB productid')
-    parser.add_argument('firmware', action="store", nargs='+', help="Firmware file(s)")
-    args = parser.parse_args()
-
-    found_bootloader = False
-
-    # find USB devices
-    dev = usb.core.find(idVendor=TEENSY_BL_VENDORID, idProduct=TEENSY_BL_PRODUCTID)
-    # loop through devices, printing vendor and product ids in decimal and hex
-    if dev is not None:
-        print("Found teensy bootloader")
-        found_bootloader = True
-    else:
-        dev = usb.core.find(idVendor=args.vendor_id, idProduct=args.product_id)
-        if dev is None:
-            print("No PX4 Device found try to press the button program push button")
-        print("Attempting to reboot into Teensy bootloader...", end="", flush=True)
-
-    try:
-        while True:
-            portlist = []
-            patterns = args.port.split(",")
-            # on unix-like platforms use glob to support wildcard ports. This allows
-            # the use of /dev/serial/by-id/usb-3D_Robotics on Linux, which prevents the upload from
-            # causing modem hangups etc
-            if "linux" in _platform or "darwin" in _platform or "cygwin" in _platform:
-                import glob
-                for pattern in patterns:
-                    portlist += glob.glob(pattern)
-            else:
-                portlist = patterns
-
-            for port in portlist:
-                try:
-                    if "linux" in _platform:
-                        # Linux, don't open Mac OS and Win ports
-                        if "COM" not in port and "tty.usb" not in port:
-                            up = uploader(port)
-                    elif "darwin" in _platform:
-                        # OS X, don't open Windows and Linux ports
-                        if "COM" not in port and "ACM" not in port:
-                            up = uploader(port)
-                    elif "cygwin" in _platform:
-                        # Cygwin, don't open native Windows COM and Linux ports
-                        if "COM" not in port and "ACM" not in port:
-                            up = uploader(port)
-                    elif "win" in _platform:
-                        # Windows, don't open POSIX ports
-                        if "/" not in port:
-                            up = uploader(port)
-                except Exception:
-                    # open failed, rate-limit our attempts
-                    time.sleep(0.05)
-
-                    # and loop to the next port
-                    continue
-
-                while True:
-                    up.send_reboot()
-
-                    # wait for the reboot, without we might run into Serial I/O Error 5
-                    time.sleep(0.25)
-
-                    # wait for the close, without we might run into Serial I/O Error 6
-                    time.sleep(0.3)
-
-                    dev = usb.core.find(idVendor=TEENSY_BL_VENDORID, idProduct=TEENSY_BL_PRODUCTID)
-                    # loop through devices, printing vendor and product ids in decimal and hex
-                    if dev is not None:
-                        print("")
-                        print("Found teensy bootloader")
-                        found_bootloader = True
-                        break
-
-                    print('.', end="", flush=True)
-
-                    if not found_bootloader:
-                        # Go to the next port
-                        continue
-
-            if(found_bootloader):
-                while True:
-                    result = subprocess.Popen("teensy_loader_cli -v --mcu=TEENSY41 " + args.firmware[0], shell=True)
-                    text = result.communicate()[0]
-                    if(result.returncode == 0):
-                        sys.exit(0)
-
-            # Delay retries to < 20 Hz to prevent spin-lock from hogging the CPU
-            time.sleep(0.05)
-
-    # CTRL+C aborts the upload/spin-lock by interrupt mechanics
-    except KeyboardInterrupt:
-        print("\n Upload aborted by user.")
-        sys.exit(0)
-
-if __name__ == '__main__':
-    main()

Tools/upload.sh

@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+
+EXEDIR=`pwd`
+BASEDIR=$(dirname $0)
+
+SYSTYPE=`uname -s`
+
+#
+# Serial port defaults.
+#
+# XXX The uploader should be smarter than this.
+#
+if [ $SYSTYPE = "Darwin" ]; then
+SERIAL_PORTS="/dev/tty.usbmodemPX*,/dev/tty.usbmodem*"
+fi
+
+if [ $SYSTYPE = "Linux" ]; then
+SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,/dev/serial/by-id/usb-Gumstix*,/dev/serial/by-id/usb-UVify*,/dev/serial/by-id/usb-ArduPilot*,/dev/serial/by-id/ARK*,"
+fi
+
+if [[ $SYSTYPE = *"CYGWIN"* ]]; then
+SERIAL_PORTS="/dev/ttyS*"
+fi
+
+if [ $SYSTYPE = "" ]; then
+SERIAL_PORTS="COM32,COM31,COM30,COM29,COM28,COM27,COM26,COM25,COM24,COM23,COM22,COM21,COM20,COM19,COM18,COM17,COM16,COM15,COM14,COM13,COM12,COM11,COM10,COM9,COM8,COM7,COM6,COM5,COM4,COM3,COM2,COM1,COM0"
+fi
+
+python $BASEDIR/px_uploader.py --port $SERIAL_PORTS $1

boards/3dr/ctrl-zero-h7-oem-revg/bootloader.px4board

@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""

boards/3dr/ctrl-zero-h7-oem-revg/default.px4board

@@ -1,96 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS4"
-CONFIG_DRIVERS_ADC_ADS1115=y
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_DPS310=y
-CONFIG_DRIVERS_BATT_SMBUS=y
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
-CONFIG_DRIVERS_IRLOCK=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_DRIVERS_PCA9685_PWM_OUT=y
-CONFIG_DRIVERS_POWER_MONITOR_INA226=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
-CONFIG_COMMON_TELEMETRY=y
-CONFIG_DRIVERS_TONE_ALARM=y
-CONFIG_DRIVERS_UAVCAN=y
-CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ESC_BATTERY=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL=y
-CONFIG_MODULES_FW_RATE_CONTROL=y
-CONFIG_MODULES_GIMBAL=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_UUV_ATT_CONTROL=y
-CONFIG_MODULES_UUV_POS_CONTROL=y
-CONFIG_MODULES_UXRCE_DDS_CLIENT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_BSONDUMP=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_GPIO=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MTD=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_REFLECT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/3dr/ctrl-zero-h7-oem-revg/firmware.prototype

@@ -1,13 +0,0 @@
-{
-    "board_id": 1124,
-    "magic": "3dr-ctrl-zero-h7-oem-revg",
-    "description": "Firmware for the 3dr-ctrl-zero-h7-oem-revg board",
-    "image": "",
-    "build_time": 0,
-    "summary": "3dr-ctrl-zero-h7-oem-revg",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1966080,
-    "git_identity": "",
-    "board_revision": 0
-}

boards/3dr/ctrl-zero-h7-oem-revg/init/rc.board_defaults

@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-param set-default BAT1_V_DIV 10.1
-param set-default BAT1_A_PER_V 17
-
-safety_button start

boards/3dr/ctrl-zero-h7-oem-revg/init/rc.board_sensors

@@ -1,19 +0,0 @@
-#!/bin/sh
-#
-# board specific sensors init
-#------------------------------------------------------------------------------
-
-board_adc start
-
-# Internal ICM-20602
-icm20602 -s -b 1 -R 8 start
-
-# Internal SPI bus BMI088 accel & gyro
-bmi088 -A -s -b 5 -R 8 start
-bmi088 -G -s -b 5 -R 8 start
-
-# Internal ICM-20948 (with magnetometer)
-icm20948 -s -b 1 -R 8 -M start
-
-# Interal DPS310 (barometer)
-dps310 -s -b 2 start

boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config/bootloader/defconfig

@@ -1,91 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_SPI_EXCHANGE is not set
-# CONFIG_STM32H7_SYSCFG is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743II=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_INITTHREAD_PRIORITY=254
-CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x1124
-CONFIG_CDCACM_PRODUCTSTR="PX4 BL 3DR ControlZeroH7 OEM"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x26ac
-CONFIG_CDCACM_VENDORSTR="3DR"
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="bootloader_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SPI=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_PWR_EXTERNAL_SOURCE_SUPPLY=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_USART3=y
-CONFIG_SYSTEMTICK_HOOK=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
-CONFIG_TTY_SIGTSTP=y
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_TXBUFSIZE=300
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000

boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config/include/board.h

@@ -1,288 +0,0 @@
-/************************************************************************************
- * nuttx-config/include/board.h
- *
- *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
- *   Authors: David Sidrane <david.sidrane@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#pragma once
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-#include "stm32_sdmmc.h"
-
-/* Clocking *************************************************************************/
-/* The board provides the following clock sources:
- *
- *   X1: 24 MHz crystal for HSE
- *
- * So we have these clock source available within the STM32
- *
- *   HSI: 16 MHz RC factory-trimmed internal oscillator
- *   HSE: 24 MHz crystal for HSE
- */
-#define STM32_BOARD_XTAL        24000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     0
-
-#define STM32_HSEBYP_ENABLE	1
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 24,000,000
- *
- * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     1 <= PLLM <= 63
- *     4 <= PLLN <= 512
- *   150 MHz <= PLL_VCOL <= 420MHz
- *   192 MHz <= PLL_VCOH <= 836MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * CPUCLK  = SYSCLK / D1CPRE
- * Subject to
- *
- *   PLLP1   = {2, 4, 6, 8, ..., 128}
- *   PLLP2,3 = {2, 3, 4, ..., 128}
- *   CPUCLK <= 480 MHz
- */
-#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
-
-/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
- *
- *   PLL1_VCO = (24,000,000 / 2) * 80 = 960 MHz
- *
- *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
- *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
- *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
- */
-#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE|RCC_PLLCFGR_PLL1RGE_4_8_MHZ|RCC_PLLCFGR_DIVP1EN|RCC_PLLCFGR_DIVQ1EN|RCC_PLLCFGR_DIVR1EN)
-#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(2)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(80)
-#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
-#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
-#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
-
-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 80)
-#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
-#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
-#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
-
-/* PLL2 */
-#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE|RCC_PLLCFGR_PLL2RGE_4_8_MHZ|RCC_PLLCFGR_DIVP2EN|RCC_PLLCFGR_DIVQ2EN|RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
-#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(32)
-#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
-#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
-#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
-
-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 32)
-#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-
-/* PLL3 */
-#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE|RCC_PLLCFGR_PLL3RGE_4_8_MHZ|RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
-#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(32)
-#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
-#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
-#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
-
-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 32)
-#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
-#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-
-/* SYSCLK = PLL1P = 480MHz
- * CPUCLK = SYSCLK / 1 = 480 MHz
- */
-#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
-#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
-#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
-
-/* Configure Clock Assignments */
-
-/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
- * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
- */
-#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
-#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
-#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
-#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
-#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
-#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
-#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
-#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
-#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* Timer clock frequencies */
-
-/* Timers driven from APB1 will be twice PCLK1 */
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Kernel Clock Configuration
- *  Note: look at Table 54 in ST Manual
- */
-#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI  /* I2C123 clock source */
-#define STM32_RCC_D3CCIPR_I2C4SRC	   RCC_D3CCIPR_I2C4SEL_HSI	 /* I2C4 clock source */
-#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2 /* SPI123 clock source */
-#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2  /* SPI45 clock source */
-#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2    /* SPI6 clock source */
-#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3    /* USB 1 and 2 clock source */
-#define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */
-#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
-
-#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
-
-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
-/* FLASH wait states */
-#define BOARD_FLASH_WAITSTATES 2
-
-/* SDMMC definitions ********************************************************/
-/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
-#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-
-/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
- * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
- */
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-
-#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
-
-
-/* UART/USART */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2      /* PD5  */
-#define GPIO_USART2_RX   GPIO_USART2_RX_2      /* PD6  */
-#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2 /* PD3  */
-#define GPIO_USART2_RTS  GPIO_USART2_RTS_2     /* PD4  */
-
-#define GPIO_USART3_TX   GPIO_USART3_TX_3      /* PD8  */
-#define GPIO_USART3_RX   GPIO_USART3_RX_3      /* PD9  */
-#define GPIO_USART3_CTS  GPIO_USART3_CTS_NSS_2 /* PD11 */
-#define GPIO_USART3_RTS  GPIO_USART3_RTS_2     /* PD12 */
-
-#define GPIO_UART4_TX    GPIO_UART4_TX_2       /* PA0  */
-#define GPIO_UART4_RX    GPIO_UART4_RX_2       /* PA1  */
-
-#define GPIO_USART6_TX   0                     /* USART6 is RX-only */
-#define GPIO_USART6_RX   GPIO_USART6_RX_1      /* PC7  */
-
-#define GPIO_UART7_TX    GPIO_UART7_TX_3       /* PE8  */
-#define GPIO_UART7_RX    GPIO_UART7_RX_3       /* PE7  */
-
-#define GPIO_UART8_TX    GPIO_UART8_TX_1       /* PE1  */
-#define GPIO_UART8_RX    GPIO_UART8_RX_1       /* PE0  */
-
-
-/* CAN */
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_3        /* PD0  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_3        /* PD1  */
-
-#define GPIO_CAN2_RX     GPIO_CAN2_RX_1        /* PB12 */
-#define GPIO_CAN2_TX     GPIO_CAN2_TX_1        /* PB13 */
-
-
-/* SPI */
-#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
-
-#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */
-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
-
-#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_3) /* PB10 */
-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_1               /* PB14 */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_1               /* PB15 */
-
-#define GPIO_SPI5_SCK    ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7  */
-#define GPIO_SPI5_MISO   GPIO_SPI5_MISO_1               /* PF8  */
-#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_2               /* PF9  */
-
-
-/* I2C */
-#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
-#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */
-
-#define GPIO_I2C3_SCL GPIO_I2C3_SCL_2       /* PH7 */
-#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */
-
-#define GPIO_I2C4_SCL GPIO_I2C4_SCL_4       /* PB6 */
-#define GPIO_I2C4_SDA GPIO_I2C4_SDA_4       /* PB7 */

boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config/include/board_dma_map.h

@@ -1,44 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMAMUX1
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0 /* DMA1:37 */
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0 /* DMA1:38 */
-
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_1 /* DMA1:71 */
-#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_1 /* DMA1:72 */
-
-#define DMAMAP_SPI5_RX    DMAMAP_DMA12_SPI5RX_0 /* DMA1:83 */
-#define DMAMAP_SPI5_TX    DMAMAP_DMA12_SPI5TX_0 /* DMA1:84 */

boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config/nsh/defconfig

@@ -1,260 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_MMCSD_HAVE_CARDDETECT is not set
-# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
-# CONFIG_MMCSD_MMCSUPPORT is not set
-# CONFIG_MMCSD_SPI is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_CAT is not set
-# CONFIG_NSH_DISABLE_CD is not set
-# CONFIG_NSH_DISABLE_CP is not set
-# CONFIG_NSH_DISABLE_DATE is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_ECHO is not set
-# CONFIG_NSH_DISABLE_ENV is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXPORT is not set
-# CONFIG_NSH_DISABLE_FREE is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_KILL is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_LS is not set
-# CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_MOUNT is not set
-# CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
-# CONFIG_NSH_DISABLE_PWD is not set
-# CONFIG_NSH_DISABLE_RM is not set
-# CONFIG_NSH_DISABLE_RMDIR is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_SET is not set
-# CONFIG_NSH_DISABLE_SLEEP is not set
-# CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TEST is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_NSH_DISABLE_UMOUNT is not set
-# CONFIG_NSH_DISABLE_UNSET is not set
-# CONFIG_NSH_DISABLE_USLEEP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743II=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_ARM_MPU_EARLY_RESET=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x1124
-CONFIG_CDCACM_PRODUCTSTR="3DRControlZeroH7OEM_revG"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x26ac
-CONFIG_CDCACM_VENDORSTR="3DR"
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_EXPERIMENTAL=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_MAX_TASKS=64
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="nsh_main"
-CONFIG_INIT_STACKSIZE=3194
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_REGIONS=4
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_PROGMEM=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_READLINE_CMD_HISTORY=y
-CONFIG_READLINE_TABCOMPLETION=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
-CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32H7_ADC1=y
-CONFIG_STM32H7_ADC3=y
-CONFIG_STM32H7_BBSRAM=y
-CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
-CONFIG_STM32H7_I2C1=y
-CONFIG_STM32H7_I2C3=y
-CONFIG_STM32H7_I2C4=y
-CONFIG_STM32H7_I2C_DYNTIMEO=y
-CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_PWR_EXTERNAL_SOURCE_SUPPLY=y
-CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
-CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SDMMC1=y
-CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI1=y
-CONFIG_STM32H7_SPI1_DMA=y
-CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI2=y
-CONFIG_STM32H7_SPI5=y
-CONFIG_STM32H7_SPI5_DMA=y
-CONFIG_STM32H7_SPI5_DMA_BUFFER=1024
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM2=y
-CONFIG_STM32H7_TIM3=y
-CONFIG_STM32H7_TIM4=y
-CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_UART4=y
-CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_UART8=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
-CONFIG_STM32H7_USART6=y
-CONFIG_STM32H7_USART_BREAKS=y
-CONFIG_STM32H7_USART_INVERT=y
-CONFIG_STM32H7_USART_SINGLEWIRE=y
-CONFIG_STM32H7_USART_SWAP=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGTSTP=y
-CONFIG_UART4_BAUD=57600
-CONFIG_UART4_RXBUFSIZE=600
-CONFIG_UART4_TXBUFSIZE=1500
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_TXBUFSIZE=1500
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_SERIAL_CONSOLE=y
-CONFIG_UART8_TXBUFSIZE=1500
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_IFLOWCONTROL=y
-CONFIG_USART2_OFLOWCONTROL=y
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_TXBUFSIZE=1500
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_IFLOWCONTROL=y
-CONFIG_USART3_OFLOWCONTROL=y
-CONFIG_USART3_RXBUFSIZE=600
-CONFIG_USART3_TXBUFSIZE=3000
-CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000

boards/3dr/ctrl-zero-h7-oem-revg/nuttx-config/scripts/bootloader_script.ld

@@ -1,221 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The board uses an STM32H743II has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * There's a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * drepresed, then the boot will be from 0x1FF0:0000
- *
- * The STM32H743ZI also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08000000, LENGTH =  128K
-	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
-	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
-	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
-	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
-	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > FLASH
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > FLASH
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > FLASH
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > FLASH
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > AXI_SRAM AT > FLASH
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > AXI_SRAM
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-
-	.ramfunc : {
-		_sramfuncs = .;
-		*(.ramfunc  .ramfunc.*)
-		. = ALIGN(4);
-		_eramfuncs = .;
-	} > ITCM_RAM AT > FLASH
-
-	_framfuncs = LOADADDR(.ramfunc);
-}