updated warning (#22367)

Signed-off-by: frederik <frederik@auterion.com>
Co-authored-by: frederik <frederik@auterion.com>

.ackrc

@@ -0,0 +1 @@
+--ignore-dir=Documentation

.ci/Jenkinsfile-compile

@@ -0,0 +1,213 @@
+#!/usr/bin/env groovy
+
+pipeline {
+  agent none
+  stages {
+
+    stage('Build') {
+      steps {
+        script {
+          def build_nodes = [:]
+          def docker_images = [
+            armhf: "px4io/px4-dev-armhf:2023-06-26",
+            arm64: "px4io/px4-dev-aarch64:2022-08-12",
+            base: "px4io/px4-dev-ros2-foxy:2022-08-12",
+            nuttx: "px4io/px4-dev-nuttx-focal:2022-08-12",
+          ]
+
+          def armhf_builds = [
+            target: ["beaglebone_blue_default", "emlid_navio2_default", "px4_raspberrypi_default", "scumaker_pilotpi_default"],
+            image: docker_images.armhf,
+            archive: false
+          ]
+
+          def arm64_builds = [
+            target: ["scumaker_pilotpi_arm64"],
+            image: docker_images.arm64,
+            archive: false
+          ]
+
+          def base_builds = [
+            target: ["px4_sitl_default"],
+            image: docker_images.base,
+            archive: false
+          ]
+
+          def nuttx_builds_archive = [
+            target: [
+                     "airmind_mindpx-v2_default",
+                     "ark_can-flow_canbootloader",
+                     "ark_can-flow_default",
+                     "ark_can-gps_canbootloader",
+                     "ark_can-gps_default",
+                     "ark_cannode_canbootloader",
+                     "ark_cannode_default",
+                     "ark_can-rtk-gps_canbootloader",
+                     "ark_can-rtk-gps_default",
+                     "ark_fmu-v6x_bootloader",
+                     "ark_fmu-v6x_default",
+                     "atl_mantis-edu_default",
+                     "av_x-v1_default",
+                     "bitcraze_crazyflie_default",
+                     "bitcraze_crazyflie21_default",
+                     "cuav_can-gps-v1_canbootloader",
+                     "cuav_can-gps-v1_default",
+                     "cuav_nora_default",
+                     "cuav_x7pro_default",
+                     "cubepilot_cubeorange_default",
+                     "cubepilot_cubeorangeplus_default",
+                     "cubepilot_cubeyellow_default",
+                     "diatone_mamba-f405-mk2_default",
+                     "flywoo_gn-f405_default",
+                     "freefly_can-rtk-gps_canbootloader",
+                     "freefly_can-rtk-gps_default",
+                     "holybro_can-gps-v1_canbootloader",
+                     "holybro_can-gps-v1_default",
+                     "holybro_durandal-v1_default",
+                     "holybro_kakutef7_default",
+                     "holybro_kakuteh7_default",
+                     "holybro_kakuteh7v2_default",
+                     "holybro_kakuteh7mini_default",
+                     "holybro_pix32v5_default",
+                     "matek_gnss-m9n-f4_canbootloader",
+                     "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
+                     "modalai_fc-v1_default",
+                     "modalai_fc-v2_default",
+                     "mro_ctrl-zero-classic_default",
+                     "mro_ctrl-zero-f7_default",
+                     "mro_ctrl-zero-f7-oem_default",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_pixracerpro_default",
+                     "mro_x21-777_default",
+                     "mro_x21_default",
+                     "nxp_fmuk66-e_default",
+                     "nxp_fmuk66-e_socketcan",
+                     "nxp_fmuk66-v3_default",
+                     "nxp_fmuk66-v3_socketcan",
+                     "nxp_fmurt1062-v1_default",
+                     "nxp_mr-canhubk3_default",
+                     "nxp_ucans32k146_canbootloader",
+                     "nxp_ucans32k146_default",
+                     "omnibus_f4sd_default",
+                     "px4_fmu-v2_default",
+                     "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
+                     "px4_fmu-v2_multicopter",
+                     "px4_fmu-v2_rover",
+                     "px4_fmu-v3_default",
+                     "px4_fmu-v4_default",
+                     "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
+                     "px4_fmu-v5_debug",
+                     "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
+                     "px4_fmu-v5_stackcheck",
+                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5x_default",
+                     "px4_fmu-v6c_default",
+                     "px4_fmu-v6u_default",
+                     "px4_fmu-v6x_default",
+                     "px4_io-v2_default",
+                     "raspberrypi_pico_default",
+                     "sky-drones_smartap-airlink_default",
+                     "spracing_h7extreme_default",
+                     "thepeach_k1_default",
+                     "thepeach_r1_default",
+                     "uvify_core_default",
+                     "siyi_n7_default"
+            ],
+            image: docker_images.nuttx,
+            archive: true
+          ]
+
+          def docker_builds = [
+            armhf_builds, base_builds, nuttx_builds_archive
+          ]
+
+          for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
+            for (def build_target = 0; build_target < docker_builds[build_type].target.size(); build_target++) {
+              build_nodes.put(docker_builds[build_type].target[build_target],
+                createBuildNode(docker_builds[build_type].archive, docker_builds[build_type].image, docker_builds[build_type].target[build_target])
+                )
+            }
+          }
+
+        parallel build_nodes
+
+        } // script
+      } // steps
+    } // stage Build
+
+    // TODO: actually upload artifacts to S3
+    // stage('S3 Upload') {
+    //   agent {
+    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
+    //   }
+    //   options {
+    //         skipDefaultCheckout()
+    //   }
+    //   when {
+    //     anyOf {
+    //       branch 'master'
+    //       branch 'beta'
+    //       branch 'stable'
+    //       branch 'pr-jenkins' // for testing
+    //     }
+    //   }
+    //   steps {
+    //     sh 'echo "uploading to S3"'
+    //   }
+    // }
+
+  } // stages
+  environment {
+    CCACHE_DIR = '/tmp/ccache'
+    CI = true
+  }
+  options {
+    buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
+    timeout(time: 120, unit: 'MINUTES')
+  }
+}
+
+def createBuildNode(Boolean archive, String docker_image, String target) {
+  return {
+
+    bypass_entrypoint = ''
+
+    node {
+      docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {
+        docker.image(docker_image).inside('-e CCACHE_BASEDIR=${WORKSPACE} -v ${CCACHE_DIR}:${CCACHE_DIR}:rw' + bypass_entrypoint) {
+          stage(target) {
+            try {
+              sh('export')
+              checkout(scm)
+              sh('make distclean; git clean -ff -x -d .')
+              sh('git fetch --tags')
+              sh('ccache -s')
+              sh('make ' + target)
+              sh('ccache -s')
+              sh('make sizes')
+              if (archive) {
+                archiveArtifacts(allowEmptyArchive: false, artifacts: 'build/*/*.px4, build/*/*.elf, build/*/*.bin', fingerprint: true, onlyIfSuccessful: true)
+              }
+              sh('make ' + target + ' package')
+              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.tar.bz2', fingerprint: true, onlyIfSuccessful: true)
+              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.deb', fingerprint: true, onlyIfSuccessful: true)
+            }
+            catch (exc) {
+              throw (exc)
+            }
+            finally {
+              sh('make distclean; git clean -ff -x -d .')
+            }
+          }
+        }
+      }
+    }
+  }
+}

.ci/Jenkinsfile-hardware

@@ -0,0 +1,904 @@
+#!/usr/bin/env groovy
+
+pipeline {
+  agent none
+  stages {
+    stage('Hardware Test') {
+
+      parallel {
+
+        stage("cubepilot_cubeorange_test") {
+          stages {
+            stage("build cubepilot_cubeorange_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make cubepilot_cubeorange_bootloader'
+                sh 'make cubepilot_cubeorange_test'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*, build/cubepilot_cubeorange_test/etc/init.d/airframes/*', name: 'cubepilot_cubeorange_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'cubepilot_cubeorange'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'cubepilot_cubeorange_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_bootloader/cubepilot_cubeorange_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    // run tests
+                    runTests()
+
+                    // load all airframes
+                    // sh("./Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` `cd build/cubepilot_cubeorange_test/etc/init.d/airframes/; find . -regex '.*/[0-9].*' -exec basename {} \\; | cut -d '_' -f 1` || true") // test loading all airframes\
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("cuav_x7pro_test") {
+          stages {
+            stage("build cuav_x7pro_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make cuav_x7pro_bootloader'
+                sh 'make cuav_x7pro_test'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'cuav_x7pro'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'cuav_x7pro_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_bootloader/cuav_x7pro_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v4_test") {
+          stages {
+            stage("build px4_fmu-v4_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v4_test'
+                sh 'make px4_fmu-v4_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v4'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v4_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v4pro_test") {
+          stages {
+            stage("build px4_fmu-v4pro_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v4pro_test'
+                sh 'make px4_fmu-v4pro_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4pro_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v4pro'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v4pro_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v5_debug") {
+          stages {
+            stage("build px4_fmu-v5_debug") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v5_debug'
+                sh 'make px4_fmu-v5_debug bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_debug'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v5'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v5_debug'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600 || true'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+
+                    // test dataman
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+                    checkStatus()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v5_stackcheck") {
+          stages {
+            stage("build px4_fmu-v5_stackcheck") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v5_stackcheck'
+                sh 'make px4_fmu-v5_stackcheck bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_stackcheck'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v5'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v5_stackcheck'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+
+                    // test dataman
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+                    checkStatus()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("px4_fmu-v5_test") {
+          stages {
+            stage("build px4_fmu-v5_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make px4_fmu-v5_test'
+                sh 'make px4_fmu-v5_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'px4_fmu-v5'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'px4_fmu-v5_test'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("nxp_fmuk66-v3_test") {
+          stages {
+            stage("build nxp_fmuk66-v3_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
+                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkoutSCM()
+                sh 'make nxp_fmuk66-v3_test'
+                //sh 'make nxp_fmuk66-v3_test bootloader_elf'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'nxp_fmuk66-v3_test'
+              }
+              post {
+                always {
+                  sh 'make distclean; git clean -ff -x -d .'
+                }
+              }
+            } // stage build
+            stage("hardware") {
+              agent {
+                label 'nxp_fmuk66-v3'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'nxp_fmuk66-v3_test'
+                    //sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_bootloader.elf'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    runTests()
+                  }
+                }
+                stage("status") {
+                  steps {
+                    // configure
+                    resetParameters()
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
+                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
+                    checkStatus()
+                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
+                  }
+                }
+                stage("print topics") {
+                  steps {
+                    printTopics()
+                  }
+                }
+              }
+              post {
+                always {
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
+                }
+              }
+            } // stage test
+          }
+        }
+
+      } // parallel
+    } // stage Hardware Test
+  } // stages
+  environment {
+    CCACHE_DIR = '/tmp/ccache'
+    CCACHE_NOHASHDIR = 1
+    CI = true
+  }
+  options {
+    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
+    timeout(time: 180, unit: 'MINUTES')
+    skipDefaultCheckout()
+  }
+}
+
+void checkoutSCM() {
+  retry(3) {
+    checkout scm
+    sh 'export'
+    sh 'make distclean; git clean -ff -x -d .'
+    sh 'git fetch --tags'
+    sh 'ccache -z'
+  }
+}
+
+void quickCalibrate() {
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters before
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+}
+
+void checkStatus() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+
+  // status commands
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+}
+
+void resetParameters() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "CBRK_BUZZER" --value "782097"'
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SDLOG_DIRS_MAX" --value "1"'
+}
+
+void runTests() {
+
+  // test loading a range of airframes
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
+
+  resetParameters()
+
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink_tests" || true' // TODO
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+
+  // tests (stop modules first)
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink stop-all"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "navigator stop"'
+  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
+
+  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
+}
+
+void printTopics() {
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
+
+  // these are for casually inspecting the system, output failure doesn't matter
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_wind" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener commander_state" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_odometry" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_optical_flow_vel" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_states" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_wind" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener event" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener heater_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener input_rc" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener led_control" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener log_message" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener manual_control_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mavlink_log" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mission" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener multirotor_motor_limits" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener optical_flow" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_controller_landing_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_setpoint_triplet" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener radio_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener rate_ctrl_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener safety" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fft" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_preflight_mag" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command_ack" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_control_mode" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_land_detected" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
+}
+
+void resetBoard() {
+  resetParameters()
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+}

.devcontainer/devcontainer.json

@@ -15,7 +15,6 @@
 	"extensions": [
 		"chiehyu.vscode-astyle",
 		"dan-c-underwood.arm",
-		"editorconfig.editorconfig",
 		"fredericbonnet.cmake-test-adapter",
 		"github.vscode-pull-request-github",
 		"marus25.cortex-debug",

.editorconfig

@@ -1,14 +0,0 @@
-root = true
-
-[*]
-insert_final_newline = true
-
-[{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
-indent_style = tab
-tab_width = 8
-# Not in the official standard, but supported by many editors
-max_line_length = 120
-
-[*.yaml, *.yml]
-indent_style = space
-indent_size = 2

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -20,14 +20,14 @@ body:
           3. Took off '....'
           4. See error
     validations:
-      required: false
+      required: true
 
   - type: textarea
     attributes:
       label: Expected behavior
       description: A clear and concise description of what you expected to happen.
     validations:
-      required: false
+      required: true
 
   - type: textarea
     attributes:
@@ -45,7 +45,7 @@ body:
       placeholder: |
           # PASTE HERE THE LINK TO THE LOG
     validations:
-      required: false
+      required: true
 
   - type: markdown
     attributes:
@@ -60,14 +60,14 @@ body:
       placeholder: |
           # If you don't know the version, paste the output of `ver all` in the MAVLink Shell of QGC
     validations:
-      required: false
+      required: true
 
   - type: input
     attributes:
       label: Flight controller
       description: Specify your flight controller model (what type is it, where was it bought from, ...).
     validations:
-      required: false
+      required: true
 
   - type: dropdown
     attributes:

.github/workflows/build_all_targets.yml

@@ -1,158 +0,0 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
-name: Build all targets
-
-on:
-  push:
-    tags:
-      - 'v*'
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  group_targets:
-    name: Scan for Board Targets
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    outputs:
-      matrix: ${{ steps.set-matrix.outputs.matrix }}
-      timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
-      tagname: ${{ steps.set-tag.outputs.tagname }}
-      branchname: ${{ steps.set-branch.outputs.branchname }}
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Update python packaging to avoid canonicalize_version() error
-        run: |
-            pip3 install -U packaging
-
-      - name: Install Python Dependencies
-        uses: py-actions/py-dependency-install@v4
-        with:
-          path: "./Tools/setup/requirements.txt"
-
-      - id: set-matrix
-        run: echo "::set-output name=matrix::$(./Tools/ci/generate_board_targets_json.py --group)"
-
-      - id: set-timestamp
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
-
-      - id: set-branch
-        run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"
-
-      - name: Debug Matrix Output
-        if: runner.debug == '1'
-        run: |
-          echo "${{ steps.set-timestamp.outputs.timestamp }}"
-          echo "${{ steps.set-branch.outputs.branchname }}"
-          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
-
-  setup:
-    name: Build Group [${{ matrix.group }}]
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: group_targets
-    strategy:
-      matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
-      fail-fast: false
-    container:
-      image: ${{ matrix.container }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Git ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Setup ccache
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-
-      - name: Configure ccache
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
-
-      - name: Building [${{ matrix.group }}]
-        run: |
-            ./Tools/ci/build_all_runner.sh ${{matrix.targets}}
-
-      - name: Arrange Build Artifacts
-        run: |
-          ./Tools/ci/package_build_artifacts.sh
-
-      - name: Upload Build Artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: px4_${{matrix.group}}_build_artifacts
-          path: artifacts/
-
-      - name: Cache Save
-        run: ccache -s
-
-  artifacts:
-    name: Upload Artifacts to S3
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Branch Name
-        run: |
-          echo "${{ needs.group_targets.outputs.branchname }}"
-
-      - name: Uploading Artifacts to S3 [${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}]
-        uses: jakejarvis/s3-sync-action@master
-        with:
-          args: --acl public-read
-        env:
-          AWS_S3_BUCKET: 'px4-travis'
-          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-          AWS_REGION: 'us-west-1'
-          SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}/
-
-  release:
-    name: Create Release and Upload Artifacts
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/v')
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Upload Binaries to Release
-        uses: softprops/action-gh-release@v2
-        with:
-          draft: true
-          files: artifacts/*.px4

.github/workflows/checks.yml

@@ -16,7 +16,6 @@ jobs:
       matrix:
         check: [
           "check_format",
-          "check_newlines",
           "tests",
           "tests_coverage",
           "px4_fmu-v2_default stack_check",
@@ -24,7 +23,6 @@ jobs:
           "shellcheck_all",
           "NO_NINJA_BUILD=1 px4_fmu-v5_default",
           "NO_NINJA_BUILD=1 px4_sitl_default",
-          "px4_sitl_allyes",
           "airframe_metadata",
           "module_documentation",
           "parameters_metadata",

.github/workflows/clang-tidy.yml

@@ -17,7 +17,5 @@ jobs:
       with:
         token: ${{secrets.ACCESS_TOKEN}}
 
-    - uses: corrupt952/actions-retry-command@v1.0.7
-      with:
-        command: make clang-tidy-quiet
-        max_attempts: 3
+    - name: make clang-tidy-quiet
+      run: make clang-tidy-quiet

.github/workflows/compile_linux.yml

@@ -0,0 +1,58 @@
+name: Compile Linux Targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'stable'
+    - 'beta'
+    - 'release/*'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-armhf:2023-06-26
+    strategy:
+      matrix:
+        config: [
+          beaglebone_blue_default,
+          emlid_navio2_default,
+          px4_raspberrypi_default,
+          scumaker_pilotpi_default,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - name: ownership workaround
+      run: git config --system --add safe.directory '*'
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s

.github/workflows/compile_linux_arm64.yml

@@ -0,0 +1,54 @@
+name: Compile Linux ARM64 Targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'stable'
+    - 'beta'
+    - 'release/*'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-aarch64:2022-08-12
+    strategy:
+      matrix:
+        config: [
+          scumaker_pilotpi_arm64,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s

.github/workflows/compile_macos.yml

@@ -18,11 +18,6 @@ jobs:
           px4_sitl
           ]
     steps:
-    - name: install Python 3.10
-      uses: actions/setup-python@v4
-      with:
-        python-version: "3.10"
-
     - uses: actions/checkout@v1
       with:
         token: ${{secrets.ACCESS_TOKEN}}

.github/workflows/compile_nuttx.yml

@@ -0,0 +1,133 @@
+name: Compile Nuttx Targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'stable'
+    - 'beta'
+    - 'release/*'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-nuttx-focal:2022-08-12
+    strategy:
+      fail-fast: false
+      matrix:
+        config: [
+          airmind_mindpx-v2,
+          ark_can-flow,
+          ark_can-gps,
+          ark_can-rtk-gps,
+          ark_cannode,
+          ark_fmu-v6x,
+          atl_mantis-edu,
+          av_x-v1,
+          bitcraze_crazyflie,
+          bitcraze_crazyflie21,
+          cuav_can-gps-v1,
+          cuav_nora,
+          cuav_x7pro,
+          cubepilot_cubeorange,
+          cubepilot_cubeorangeplus,
+          cubepilot_cubeyellow,
+          diatone_mamba-f405-mk2,
+          freefly_can-rtk-gps,
+          holybro_can-gps-v1,
+          holybro_durandal-v1,
+          holybro_kakutef7,
+          holybro_kakuteh7,
+          holybro_pix32v5,
+          matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
+          matek_h743-slim,
+          modalai_fc-v1,
+          modalai_fc-v2,
+          mro_ctrl-zero-f7,
+          mro_ctrl-zero-f7-oem,
+          mro_ctrl-zero-h7,
+          mro_ctrl-zero-h7-oem,
+          mro_pixracerpro,
+          mro_x21,
+          mro_x21-777,
+          nxp_fmuk66-e,
+          nxp_fmuk66-v3,
+          nxp_fmurt1062-v1,
+          nxp_mr-canhubk3,
+          nxp_ucans32k146,
+          omnibus_f4sd,
+          px4_fmu-v2,
+          px4_fmu-v3,
+          px4_fmu-v4,
+          px4_fmu-v4pro,
+          px4_fmu-v5,
+          px4_fmu-v5x,
+          px4_fmu-v6c,
+          px4_fmu-v6u,
+          px4_fmu-v6x,
+          raspberrypi_pico,
+          sky-drones_smartap-airlink,
+          spracing_h7extreme,
+          uvify_core,
+          siyi_n7
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 120M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make all_variants_${{matrix.config}}
+      run: make all_variants_${{matrix.config}}
+      timeout-minutes: 45
+    - name: make ${{matrix.config}} bloaty_compileunits
+      run: make ${{matrix.config}} bloaty_compileunits || true
+    - name: make ${{matrix.config}} bloaty_inlines
+      run: make ${{matrix.config}} bloaty_inlines || true
+    - name: make ${{matrix.config}} bloaty_segments
+      run: make ${{matrix.config}} bloaty_segments || true
+    - name: make ${{matrix.config}} bloaty_symbols
+      run: make ${{matrix.config}} bloaty_symbols || true
+    - name: make ${{matrix.config}} bloaty_templates
+      run: make ${{matrix.config}} bloaty_templates || true
+    - name: make ${{matrix.config}} bloaty_ram
+      run: make ${{matrix.config}} bloaty_ram || true
+    - name: make ${{matrix.config}} bloaty_compare_master
+      run: make ${{matrix.config}} bloaty_compare_master || true
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: Upload px4 package
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_package_${{matrix.config}}
+        path: |
+          build/**/*.px4
+          build/**/*.bin

.github/workflows/compile_ubuntu.yml

@@ -1,46 +0,0 @@
-name: Ubuntu environment build
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  build_and_test:
-    name: Build and Test
-    strategy:
-      fail-fast: false
-      matrix:
-        version: ['ubuntu:22.04', 'ubuntu:24.04']
-    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: ${{ matrix.version }}
-      volumes:
-        - /github/workspace:/github/workspace
-    steps:
-
-      - name: Fix git in container
-        run: |
-          # we only need this because we are running the job in a container
-          # when checkout pulls git it does it in a shared volume
-          # and file ownership changes between steps
-          # first we install git since its missing from the base image
-          # then we mark the directory as safe for other instances
-          # of git to use.
-          apt update && apt install git -y
-          git config --global --add safe.directory $(realpath .)
-
-      - uses: actions/checkout@v4
-
-      - name: Install Deps, Build, and Make Quick Check
-        run: |
-          # we need to install dependencies and build on the same step
-          # given the stateless nature of docker images
-          ./Tools/setup/ubuntu.sh
-          make quick_check

.github/workflows/deploy_all.yml

@@ -0,0 +1,57 @@
+name: Deploy metadata for all targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+  enumerate_targets:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - id: set-matrix
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
+  build:
+    runs-on: ubuntu-latest
+    needs: enumerate_targets
+    strategy:
+      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
+    container: ${{ matrix.container }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: ownership workaround
+      run: git config --system --add safe.directory '*'
+
+    - name: make ${{matrix.target}}
+      run: make ${{matrix.target}}
+
+    - name: parameter & events metadata
+      run: |
+        make ${{matrix.target}} ver_gen events_json actuators_json
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
+        cd build/${{ matrix.target }}
+        mkdir _metadata || true
+        cp parameters.* events/*.xz actuators.json* _metadata
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
+        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
+

.github/workflows/dev_container.yml

@@ -1,102 +0,0 @@
-
-name: Container build
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-    tags:
-      - 'v*'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  build:
-    name: Build and Push Container
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-tags: true
-          submodules: false
-          fetch-depth: 0
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v3
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta
-        uses: docker/metadata-action@v5
-        with:
-          images: |
-            ghcr.io/PX4/px4-dev
-            px4io/px4-dev
-          tags: |
-            type=schedule
-            type=semver,pattern={{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=ref,event=branch,suffix=-{{date 'YYYYMMDD'}},priority=600
-            type=ref,event=branch,suffix=,priority=500
-            type=ref,event=pr
-            type=sha
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-      - name: Build and load container image
-        uses: docker/build-push-action@v6
-        id: docker
-        with:
-          context: Tools/setup
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: |
-            linux/amd64
-          load: true
-          push: false
-          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
-          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max
-
-      - name: Get Tag Name
-        id: tag_name
-        run: |
-          echo "::set-output name=tag_name::$(echo '${{ fromJSON(steps.docker.outputs.metadata)['image.name'] }}' | sed 's/,.*$//')"
-
-      - name: make quick_check
-        uses: addnab/docker-run-action@v3
-        with:
-          image: ${{ steps.tag_name.outputs.tag_name }}
-          options: -v ${{ github.workspace }}:/workspace
-          run: |
-            cd /workspace
-            git config --global --add safe.directory /workspace
-            make px4_sitl_default
-            make px4_fmu-v6x_default
-
-      - name: Push container image
-        uses: docker/build-push-action@v6
-        with:
-          context: Tools/setup
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: |
-            linux/amd64
-          provenance: mode=max
-          push: true
-          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
-          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max

.github/workflows/flash_analysis.yml

@@ -1,118 +0,0 @@
-name: FLASH usage analysis
-
-on:
-  push:
-    branches:
-      - 'main'
-  pull_request:
-    branches:
-      - '*'
-
-jobs:
-  analyze_flash:
-    name: Analyzing ${{ matrix.target }}
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-nuttx-focal
-    strategy:
-      matrix:
-        target: [px4_fmu-v5x, px4_fmu-v6x]
-    outputs:
-      px4_fmu-v5x: ${{ steps.gen-output.outputs.output_px4_fmu-v5x }}
-      px4_fmu-v6x: ${{ steps.gen-output.outputs.output_px4_fmu-v6x }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Git ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Build Target
-        run: make ${{ matrix.target }}
-
-      - name: Store the ELF with the change
-        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./with-change.elf
-
-      - name: Clean previous build
-        run: |
-          make clean
-          make distclean
-
-      - name: If it's a PR checkout the base commit
-        if: ${{ github.event.pull_request }}
-        run: git checkout ${{ github.event.pull_request.base.sha }}
-
-      - name: If it's a push checkout the previous commit
-        if: github.event_name == 'push'
-        run: git checkout ${{ github.event.before }}
-
-      - name: Update submodules
-        run: make submodulesupdate
-
-      - name: Build
-        run: make ${{ matrix.target }}
-
-      - name: Store the ELF before the change
-        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./before-change.elf
-
-      - name: bloaty-action
-        uses: carlosperate/bloaty-action@v1.1.0
-        id: bloaty-step
-        with:
-          bloaty-args: -d sections,compileunits -n 0 ./with-change.elf -- ./before-change.elf
-          output-to-summary: true
-
-      - name: Generate output
-        id: gen-output
-        run: |
-          EOF=$(dd if=/dev/urandom bs=15 count=1 status=none | base64)
-          echo "output_${{ matrix.target }}<<$EOF" >> $GITHUB_OUTPUT
-          echo "${{ steps.bloaty-step.outputs.bloaty-output-encoded }}" >> $GITHUB_OUTPUT
-          echo "$EOF" >> $GITHUB_OUTPUT
-
-  post_pr_comment:
-    name: Publish Results
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [analyze_flash]
-    if: ${{ github.event.pull_request }}
-    steps:
-      - name: Find Comment
-        uses: peter-evans/find-comment@v3
-        id: fc
-        with:
-          issue-number: ${{ github.event.pull_request.number }}
-          comment-author: 'github-actions[bot]'
-          body-includes: FLASH Analysis
-
-      - name: Set Build Time
-        id: bt
-        run: |
-          echo "timestamp=$(date +'%Y-%m-%dT%H:%M:%S')" >> $GITHUB_OUTPUT
-
-      - name: Create or update comment
-        uses: peter-evans/create-or-update-comment@v4
-        with:
-          comment-id: ${{ steps.fc.outputs.comment-id }}
-          issue-number: ${{ github.event.pull_request.number }}
-          body: |
-            ## FLASH Analysis
-            <details>
-              <summary>px4_fmu-v5x</summary>
-
-              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v5x }}
-              ```
-            </details>
-
-            <details>
-              <summary>px4_fmu-v6x</summary>
-
-              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v6x }}
-              ```
-            </details>
-
-            **Updated: _${{ steps.bt.outputs.timestamp }}_**
-          edit-mode: replace

.github/workflows/mavros_mission_tests.yml

@@ -11,8 +11,6 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
     strategy:
       fail-fast: false
       matrix:
@@ -88,7 +86,7 @@ jobs:
       run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
     - name: Upload px4 coredump
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2-preview
       with:
         name: coredump
         path: px4.core
@@ -103,21 +101,21 @@ jobs:
 
     - name: Upload px4 binary
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: binary
         path: build/px4_sitl_default/bin/px4
 
     - name: Store PX4 log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: px4_log
         path: ~/.ros/log/*/*.ulg
 
     - name: Store ROS log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: ros_log
         path: ~/.ros/**/rostest-*.log

.github/workflows/mavros_offboard_tests.yml

@@ -11,8 +11,6 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
     strategy:
       fail-fast: false
       matrix:
@@ -83,7 +81,7 @@ jobs:
       run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
     - name: Upload px4 coredump
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2-preview
       with:
         name: coredump
         path: px4.core
@@ -98,21 +96,21 @@ jobs:
 
     - name: Upload px4 binary
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: binary
         path: build/px4_sitl_default/bin/px4
 
     - name: Store PX4 log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: px4_log
         path: ~/.ros/log/*/*.ulg
 
     - name: Store ROS log
       if: failure()
-      uses: actions/upload-artifact@v3
+      uses: actions/upload-artifact@v2
       with:
         name: ros_log
         path: ~/.ros/**/rostest-*.log

.github/workflows/metadata.yml

@@ -0,0 +1,131 @@
+name: Metadata
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+
+  airframe:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: airframe metadata
+      run: |
+        make airframe_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default/docs
+      # TODO: deploy to userguide gitbook
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  module:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: module documentation
+      run: |
+        make module_documentation
+        cd build/px4_sitl_default/docs
+        ls -ls *
+      # TODO: deploy to userguide gitbook and s3
+
+  parameter:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: parameter metadata
+      run: |
+        make parameters_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  events:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: events metadata
+      run: |
+        make extract_events
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default
+        mkdir _events_full || true
+        cp events/all_events_full.json.xz _events_full/all_events.json.xz
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/_events_full/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
+  uorb_graph:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-nuttx-focal:2022-08-12
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: uORB graph
+      run: |
+        make uorb_graphs
+        cd Tools/uorb_graph
+        ls -ls *
+      # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
+
+  ROS2_msgs:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: PX4 ROS2 msgs
+      run: |
+        git clone https://github.com/PX4/px4_msgs.git
+        rm px4_msgs/msg/*.msg
+        cp msg/*.msg px4_msgs/msg/

.github/workflows/nuttx_env_config.yml

@@ -1,32 +0,0 @@
-name: Nuttx Target with extra env config
-
-on:
-  push:
-    branches:
-    - 'main'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2022-08-12
-    strategy:
-      matrix:
-        config: [
-          px4_fmu-v5,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: make ${{matrix.config}}
-      env:
-        PX4_EXTRA_NUTTX_CONFIG: "CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
-      run: |
-        echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
-        make ${{matrix.config}} nuttx_context
-        # Check that the config option is set
-        grep CONFIG_NSH_LOGIN_PASSWORD build/${{matrix.config}}_default/NuttX/nuttx/.config

.github/workflows/python_checks.yml

@@ -10,7 +10,7 @@ on:
 
 jobs:
   build:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     steps:
     - uses: actions/checkout@v1
       with:
@@ -18,7 +18,7 @@ jobs:
     - name: Install Python3
       run: sudo apt-get install python3 python3-setuptools python3-pip -y
     - name: Install tools
-      run: python3 -m pip install mypy types-requests flake8 --break-system-packages
+      run: pip3 install --user mypy types-requests flake8
     - name: Check MAVSDK test scripts with mypy
       run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
     - name: Check MAVSDK test scripts with flake8

.github/workflows/sitl_tests.yml

@@ -1,8 +1,3 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
 name: SITL Tests
 
 on:
@@ -15,139 +10,126 @@ on:
 
 jobs:
   build:
-    name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-simulation-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    runs-on: ubuntu-latest
     strategy:
       fail-fast: false
       matrix:
         config:
           - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
+          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
           - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
           - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
 
+    container:
+      image: px4io/px4-dev-simulation-focal:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
 
-      - name: Git Ownership Workaround
-        run: git config --system --add safe.directory '*'
+    - name: Download MAVSDK
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+    - name: Install MAVSDK
+      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
 
-      - id: set-timestamp
-        name: Set timestamp for cache
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
 
-      - name: Cache Key Config
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
-          restore-keys: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
+    - name: check environment
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default
+    - name: ccache post-run px4/firmware
+      run: ccache -s
+    - name: Build SITL Gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default sitl_gazebo-classic
+    - name: ccache post-run sitl_gazebo-classic
+      run: ccache -s
+    - name: Build MAVSDK tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+        DONT_RUN: 1
+      run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
+    - name: ccache post-run mavsdk_tests
+      run: ccache -s
 
-      - name: Cache Conf Config
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
 
-      - name: Build PX4
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default
+    - name: Run SITL tests
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
+      timeout-minutes: 45
 
-      - name: Cache Post-Run [px4_sitl_default]
-        run: ccache -s
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core
 
-      - name: Build SITL Gazebo
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default sitl_gazebo-classic
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4
 
-      - name: Cache Post-Run [sitl_gazebo-classic]
-        run: ccache -s
-
-      - name: Download MAVSDK
-        run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Install MAVSDK
-        run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Check PX4 Environment Variables
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: |
-            export
-            ulimit -a
-
-      - name: Build PX4 / MAVSDK tests
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-          DONT_RUN: 1
-        run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
-
-      - name: Cache Post-Run [px4_sitl_default sitl_gazebo-classic mavsdk_tests]
-        run: ccache -s
-
-      - name: Core Dump Settings
-        run: |
-            ulimit -c unlimited
-            echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-      - name: Run SITL / MAVSDK Tests
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
-        timeout-minutes: 45
-
-      - name: Upload failed logs
-        if: failure()
-        uses: actions/upload-artifact@v4
-        with:
-          name: failed-${{matrix.config.model}}-logs.zip
-          path: |
-            logs/**/**/**/*.log
-            logs/**/**/**/*.ulg
-            build/px4_sitl_default/tmp_mavsdk_tests/rootfs/*.ulg
-
-      - name: Look at Core files
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-
-      - name: Upload PX4 coredump
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: coredump
-          path: px4.core
-
-      - name: Setup & Generate Coverage Report
-        if: contains(matrix.config.build_type, 'Coverage')
-        run: |
-            git config --global credential.helper "" # disable the keychain credential helper
-            git config --global --add credential.helper store # enable the local store credential helper
-            echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-            git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-            mkdir -p coverage
-            lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-
-      - name: Upload Coverage Information to Codecov
-        if: contains(matrix.config.build_type, 'Coverage')
-        uses: codecov/codecov-action@v4
-        with:
-          token: ${{ secrets.CODECOV_TOKEN }}
-          flags: mavsdk
-          file: coverage/lcov.info
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavsdk
+        file: coverage/lcov.info

.github_changelog_generator

@@ -0,0 +1,33 @@
+# How to install:
+#   gem install github_changelog_generator
+# How to run:
+#   github_changelog_generator -u PX4 -p Firmware
+# Description:
+#   The following params are sensible defaults for the PX4 project,
+#   if you want to do a changelog before a release you need to update since-tag and future-releases,
+
+# Params:
+#   github_changelog_generator --help for all options
+
+# max-issues
+#   max threshold for github api queries
+#   make sure you set your CHANGELOG_GITHUB_TOKEN before
+#   running
+max-issues=1500
+
+# exclude-tags-regex
+#   excludes release candidates
+exclude-tags-regex=rc[0-9]{1,}|beta[0-9]{1,}
+
+# since-tag
+#   version of last stable release
+#   you need to change this depending on what you need
+#   if you want a changelog between versions this is the lowest version
+since-tag=1.6.5
+
+# future-release
+#   version you are about to release
+#   if you want a changelog between a version and all unreleased changes grouped as a release
+#     eg: v1.6.5 to v1.7.0
+future-release=v1.7.0
+

.gitmodules

@@ -2,6 +2,10 @@
 	path = src/modules/mavlink/mavlink
 	url = https://github.com/mavlink/mavlink.git
 	branch = master
+[submodule "src/drivers/uavcan/libuavcan"]
+	path = src/drivers/uavcan/libuavcan
+	url = https://github.com/dronecan/libuavcan.git
+	branch = main
 [submodule "Tools/simulation/jmavsim/jMAVSim"]
 	path = Tools/simulation/jmavsim/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
@@ -67,25 +71,7 @@
 [submodule "src/modules/zenoh/zenoh-pico"]
 	path = src/modules/zenoh/zenoh-pico
 	url = https://github.com/px4/zenoh-pico
-	branch = dev/1.0.0-px4
+	branch = pr-zubf-werror-fix
 [submodule "src/lib/heatshrink/heatshrink"]
 	path = src/lib/heatshrink/heatshrink
 	url = https://github.com/PX4/heatshrink.git
-	branch = px4
-[submodule "Tools/simulation/gz"]
-	path = Tools/simulation/gz
-	url = https://github.com/PX4/PX4-gazebo-models.git
-	branch = main
-[submodule "boards/modalai/voxl2/libfc-sensor-api"]
-	path = boards/modalai/voxl2/libfc-sensor-api
-	url = https://gitlab.com/voxl-public/voxl-sdk/core-libs/libfc-sensor-api.git
-[submodule "src/drivers/actuators/vertiq_io/iq-module-communication-cpp"]
-	path = src/drivers/actuators/vertiq_io/iq-module-communication-cpp
-	url = https://github.com/PX4/iq-module-communication-cpp.git
-	branch = master
-[submodule "src/drivers/uavcan/libdronecan/dsdl"]
-	path = src/drivers/uavcan/libdronecan/dsdl
-	url = https://github.com/PX4/DSDL.git
-[submodule "src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan"]
-	path = src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan
-	url = https://github.com/dronecan/pydronecan

.travis.yml

@@ -0,0 +1,35 @@
+language: cpp
+
+git:
+  depth: 100
+  submodules: false
+
+matrix:
+  fast_finish: true
+  include:
+    - os: linux
+      dist: xenial
+      # In order to stay under the coverity rate limit, we only run this weekly
+      # and not on push which is configured in travis-ci settings.
+      if: branch = main
+
+before_install:
+    - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-
+
+install:
+    - export PATH=$HOME/.local/bin:$PATH
+    - pip install --user --upgrade pip
+    - pip install --user -r Tools/setup/requirements.txt
+
+script:
+    - make
+
+addons:
+  coverity_scan:
+    project:
+      name: "PX4/Firmware"
+      description: "Build submitted via Travis CI"
+    notification_email: ci@px4.io
+    build_command_prepend: "make distclean"
+    build_command: "make px4_sitl_default"
+    branch_pattern: coverity_scan

.vscode/cmake-kits.json

@@ -2,4 +2,4 @@
 	{
 		"name": "PX4 detect"
 	}
-]
+]

.vscode/cmake-variants.yaml

@@ -71,26 +71,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: px4_fmu-v5x_default
-    px4_fmu-v6c_default:
-      short: px4_fmu-v6c
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_default
-    px4_fmu-v6c_bootloader:
-      short: px4_fmu-v6c_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_bootloader
-    px4_fmu-v6u_default:
-      short: px4_fmu-v6u
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_default
-    px4_fmu-v6u_bootloader:
-      short: px4_fmu-v6u_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_bootloader
     px4_fmu-v6x_default:
       short: px4_fmu-v6x
       buildType: MinSizeRel
@@ -101,21 +81,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: px4_fmu-v6x_bootloader
-    px4_fmu-v6xrt_default:
-      short: px4_fmu-v6xrt
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6xrt_default
-    px4_fmu-v6xrt_bootloader:
-      short: px4_fmu-v6xrt_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6xrt_bootloader
-    3dr_ctrl-zero-h7-oem-revg_default:
-      short: 3dr_ctrl-zero-h7-oem-revg
-      buildType: MinSizeRel
-      settings:
-        CONFIG: 3dr_ctrl-zero-h7-oem-revg_default
     airmind_mindpx-v2_default:
       short: airmind_mindpx-v2
       buildType: MinSizeRel
@@ -156,16 +121,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio-gps_default:
-      short: ark_septentrio-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio-gps_default
-    ark_septentrio-gps_canbootloader:
-      short: ark_septentrio-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio-gps_canbootloader
     ark_cannode_default:
       short: ark_cannode_default
       buildType: MinSizeRel
@@ -186,26 +141,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_fmu-v6x_default
-    ark_fpv_bootloader:
-      short: ark_fpv_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_bootloader
-    ark_fpv_default:
-      short: ark_fpv_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_default
-    ark_pi6x_bootloader:
-      short: ark_pi6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_pi6x_bootloader
-    ark_pi6x_default:
-      short: ark_pi6x_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_pi6x_default
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel
@@ -241,21 +176,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x7pro_default
-    cuav_7-nano_default:
-      short: cuav_7-nano
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_7-nano_default
     cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
       settings:
         CONFIG: cubepilot_cubeorange_test
-    cubepilot_cubeorangeplus_test:
-      short: cubepilot_cubeorangeplus
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeorangeplus_test
     emlid_navio2_default:
       short: emlid_navio2
       buildType: MinSizeRel
@@ -301,21 +226,6 @@ CONFIG:
       buildType: MiniSizeRel
       settings:
         CONFIG: matek_gnss-m9n-f4_default
-    micoair_h743_default:
-      short: micoair_h743
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743_default
-    micoair_h743-aio_bootloader:
-      short: micoair_h743-aio_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-aio_bootloader
-    micoair_h743-aio_default:
-      short: micoair_h743-aio
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-aio_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
@@ -366,33 +276,8 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_mr-canhubk3_fmu
-    nxp_tropic-community_default:
-      short: nxp_tropic-community_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_tropic-community_default
     raspberrypi_pico_default:
       short: raspberrypi_pico
       buildType: MinSizeRel
       settings:
         CONFIG: raspberrypi_pico_default
-    zeroone_x6_default:
-      short: zeroone_x6
-      buildType: MinSizeRel
-      settings:
-        CONFIG: zeroone_x6_default
-    zeroone_x6_bootloader:
-      short: zeroone_x6_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: zeroone_x6_bootloader
-    x-mav_ap-h743v2_bootloader:
-      short: x-mav_ap-h743v2-boot
-      buildType: MinSizeRel
-      settings:
-        CONFIG: x-mav_ap-h743v2_bootloader
-    x-mav_ap-h743v2_default:
-      short: x-mav_ap-h743v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: x-mav_ap-h743v2_default

.vscode/extensions.json

@@ -4,7 +4,6 @@
     "recommendations": [
         "chiehyu.vscode-astyle",
         "dan-c-underwood.arm",
-        "editorconfig.editorconfig",
         "fredericbonnet.cmake-test-adapter",
         "github.vscode-pull-request-github",
         "marus25.cortex-debug",

.vscode/settings.json

@@ -15,7 +15,6 @@
         "cmake.buildDirectory": "${workspaceFolder}/build/${variant:CONFIG}",
         "cmake.configureOnOpen": true,
         "cmake.ctest.parallelJobs": 1,
-        "cmake.options.statusBarVisibility": "compact",
         "cmake.skipConfigureIfCachePresent": true,
         "cmakeExplorer.buildDir": "${workspaceFolder}/build/px4_sitl_test",
         "cmakeExplorer.parallelJobs": 1,

.ycm_extra_conf.py

@@ -0,0 +1,172 @@
+# This file is NOT licensed under the GPLv3, which is the license for the rest
+# of YouCompleteMe.
+#
+# Here's the license text for this file:
+#
+# This is free and unencumbered software released into the public domain.
+#
+# Anyone is free to copy, modify, publish, use, compile, sell, or
+# distribute this software, either in source code form or as a compiled
+# binary, for any purpose, commercial or non-commercial, and by any
+# means.
+#
+# In jurisdictions that recognize copyright laws, the author or authors
+# of this software dedicate any and all copyright interest in the
+# software to the public domain. We make this dedication for the benefit
+# of the public at large and to the detriment of our heirs and
+# successors. We intend this dedication to be an overt act of
+# relinquishment in perpetuity of all present and future rights to this
+# software under copyright law.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+#
+# For more information, please refer to <http://unlicense.org/>
+
+import os
+import ycm_core
+
+# These are the compilation flags that will be used in case there's no
+# compilation database set (by default, one is not set).
+# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR.
+flags = [
+'-Wall',
+'-Wextra',
+'-Werror',
+#'-Wc++98-compat',
+'-Wno-long-long',
+'-Wno-variadic-macros',
+'-fexceptions',
+'-DNDEBUG',
+# You 100% do NOT need -DUSE_CLANG_COMPLETER in your flags; only the YCM
+# source code needs it.
+#'-DUSE_CLANG_COMPLETER',
+# THIS IS IMPORTANT! Without a "-std=<something>" flag, clang won't know which
+# language to use when compiling headers. So it will guess. Badly. So C++
+# headers will be compiled as C headers. You don't want that so ALWAYS specify
+# a "-std=<something>".
+# For a C project, you would set this to something like 'c99' instead of
+# 'c++14'.
+'-std=c++14',
+# ...and the same thing goes for the magic -x option which specifies the
+# language that the files to be compiled are written in. This is mostly
+# relevant for c++ headers.
+# For a C project, you would set this to 'c' instead of 'c++'.
+'-x',
+'c++',
+'-undef', # get rid of standard definitions to allow us to include arm math header
+'-I', os.path.join(os.path.expanduser("~"),'gcc-arm-none-eabi-4_7-2013q3/arm-none-eabi/include'),
+'-I', 'Build/px4_io-v2_default.build/nuttx-export/include/',
+'-I', './NuttX/nuttx/arch/arm/include',
+'-include', './src/include/visibility.h',
+'-I', './src',
+'-I', './src/modules',
+'-I', './src/include',
+'-I', './src/lib',
+'-I', './NuttX',
+]
+
+
+# Set this to the absolute path to the folder (NOT the file!) containing the
+# compile_commands.json file to use that instead of 'flags'. See here for
+# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html
+#
+# Most projects will NOT need to set this to anything; you can just change the
+# 'flags' list of compilation flags. Notice that YCM itself uses that approach.
+compilation_database_folder = ''
+
+if os.path.exists( compilation_database_folder ):
+  database = ycm_core.CompilationDatabase( compilation_database_folder )
+else:
+  database = None
+
+SOURCE_EXTENSIONS = [ '.cpp', '.cxx', '.cc', '.c', '.m', '.mm' ]
+
+def DirectoryOfThisScript():
+  return os.path.dirname( os.path.abspath( __file__ ) )
+
+
+def MakeRelativePathsInFlagsAbsolute( flags, working_directory ):
+  if not working_directory:
+    return list( flags )
+  new_flags = []
+  make_next_absolute = False
+  path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ]
+  for flag in flags:
+    new_flag = flag
+
+    if make_next_absolute:
+      make_next_absolute = False
+      if not flag.startswith( '/' ):
+        new_flag = os.path.join( working_directory, flag )
+
+    for path_flag in path_flags:
+      if flag == path_flag:
+        make_next_absolute = True
+        break
+
+      if flag.startswith( path_flag ):
+        path = flag[ len( path_flag ): ]
+        new_flag = path_flag + os.path.join( working_directory, path )
+        break
+
+    if new_flag:
+      new_flags.append( new_flag )
+  return new_flags
+
+
+def IsHeaderFile( filename ):
+  extension = os.path.splitext( filename )[ 1 ]
+  return extension in [ '.h', '.hxx', '.hpp', '.hh' ]
+
+
+def GetCompilationInfoForFile( filename ):
+  # The compilation_commands.json file generated by CMake does not have entries
+  # for header files. So we do our best by asking the db for flags for a
+  # corresponding source file, if any. If one exists, the flags for that file
+  # should be good enough.
+  if IsHeaderFile( filename ):
+    basename = os.path.splitext( filename )[ 0 ]
+    for extension in SOURCE_EXTENSIONS:
+      replacement_file = basename + extension
+      if os.path.exists( replacement_file ):
+        compilation_info = database.GetCompilationInfoForFile(
+          replacement_file )
+        if compilation_info.compiler_flags_:
+          return compilation_info
+    return None
+  return database.GetCompilationInfoForFile( filename )
+
+
+def FlagsForFile( filename, **kwargs ):
+  if database:
+    # Bear in mind that compilation_info.compiler_flags_ does NOT return a
+    # python list, but a "list-like" StringVec object
+    compilation_info = GetCompilationInfoForFile( filename )
+    if not compilation_info:
+      return None
+
+    final_flags = MakeRelativePathsInFlagsAbsolute(
+      compilation_info.compiler_flags_,
+      compilation_info.compiler_working_dir_ )
+
+    # NOTE: This is just for YouCompleteMe; it's highly likely that your project
+    # does NOT need to remove the stdlib flag. DO NOT USE THIS IN YOUR
+    # ycm_extra_conf IF YOU'RE NOT 100% SURE YOU NEED IT.
+    #try:
+    #  final_flags.remove( '-stdlib=libc++' )
+    #except ValueError:
+    #  pass
+  else:
+    relative_to = DirectoryOfThisScript()
+    final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to )
+
+  return {
+    'flags': final_flags,
+    'do_cache': True
+  }

CMakeLists.txt

@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2024 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -113,20 +113,12 @@ include(px4_parse_function_args)
 include(px4_git)
 
 execute_process(
-	COMMAND git describe --exclude ext/* --tags --match "v[0-9]*"
+	COMMAND git describe --exclude ext/* --always --tags
 	OUTPUT_VARIABLE PX4_GIT_TAG
 	OUTPUT_STRIP_TRAILING_WHITESPACE
-	RESULTS_VARIABLE GIT_DESCRIBE_RESULT
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	)
 
-# if proper git tag unavilable default to v0.0.0
-if(NOT ${GIT_DESCRIBE_RESULT} MATCHES "0")
-	set(PX4_GIT_TAG "v0.0.0")
-endif()
-
-message(STATUS "PX4_GIT_TAG: ${PX4_GIT_TAG}")
-
 # git describe to X.Y.Z version
 string(REPLACE "." ";" VERSION_LIST ${PX4_GIT_TAG})
 
@@ -140,9 +132,7 @@ list(GET VERSION_LIST 2 PX4_VERSION_PATCH)
 string(REPLACE "-" ";" PX4_VERSION_PATCH ${PX4_VERSION_PATCH})
 list(GET PX4_VERSION_PATCH 0 PX4_VERSION_PATCH)
 
-# # Capture only the hash part after 'g'
-string(REGEX MATCH "g([a-f0-9]+)$" GIT_HASH "${PX4_GIT_TAG}")
-set(PX4_GIT_HASH ${CMAKE_MATCH_1})
+message(STATUS "PX4 version: ${PX4_GIT_TAG} (${PX4_VERSION_MAJOR}.${PX4_VERSION_MINOR}.${PX4_VERSION_PATCH})")
 
 define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                  BRIEF_DOCS "PX4 module libs"
@@ -158,7 +148,6 @@ define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                  BRIEF_DOCS "PX4 module paths"
                  FULL_DOCS "List of paths to all PX4 modules"
                  )
-
 define_property(GLOBAL PROPERTY PX4_SRC_FILES
                  BRIEF_DOCS "src files from all PX4 modules & libs"
                  FULL_DOCS "SRC files from px4_add_{module,library}"
@@ -173,10 +162,9 @@ set(config_module_list)
 set(config_kernel_list)
 
 # Find Python
-find_package(Python COMPONENTS Interpreter)
-
+find_package(PythonInterp 3)
 # We have a custom error message to tell users how to install python3.
-if(NOT Python_FOUND)
+if(NOT PYTHONINTERP_FOUND)
 	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
 		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
 		"    macOS: brew install python")
@@ -185,7 +173,7 @@ endif()
 option(PYTHON_COVERAGE "Python code coverage" OFF)
 if(PYTHON_COVERAGE)
 	message(STATUS "python coverage enabled")
-	set(Python_EXECUTABLE coverage run -p)
+	set(PYTHON_EXECUTABLE coverage run -p)
 endif()
 
 include(px4_config)
@@ -409,15 +397,8 @@ include(px4_add_gtest)
 if(BUILD_TESTING)
 	include(gtest)
 
-	# Ensure there's no -R without any filter expression since that trips newer ctest versions
-	if(TESTFILTER)
-		set(TESTFILTERARG "-R")
-	else()
-		set(TESTFILTERARG "")
-	endif()
-
 	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test ${TESTFILTERARG} ${TESTFILTER}
+			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R ${TESTFILTER} USES_TERMINAL
 			DEPENDS
 				px4
 				examples__dyn_hello
@@ -482,7 +463,7 @@ foreach(module ${config_module_list})
 endforeach()
 
 add_custom_command(OUTPUT ${uorb_graph_config}
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
 		${graph_module_list} --src-path src/lib
 		--merge-depends
 		--exclude-path src/examples
@@ -503,7 +484,7 @@ include(package)
 
 # install python requirements using configured python
 add_custom_target(install_python_requirements
-	COMMAND ${Python_EXECUTABLE} -m pip install --break-system-packages --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
+	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )

Documentation/Doxyfile.in

@@ -828,7 +828,7 @@ RECURSIVE              = YES
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libdronecan \
+EXCLUDE                = @CMAKE_SOURCE_DIR@/src/modules/uavcan/libuavcan \
                          @CMAKE_SOURCE_DIR@/src/examples \
                          @CMAKE_SOURCE_DIR@/src/templates
 

Firmware.sublime-project

@@ -0,0 +1,83 @@
+{
+	"folders":
+	[
+		{
+			"path": ".",
+			"file_exclude_patterns":
+			[
+				"*.o",
+				"*.a",
+				"*.d",
+				".built",
+				".context",
+				".depend",
+				".config",
+				".version",
+				"Make.dep",
+				".configured",
+				"*.sublime-project",
+				"*.sublime-workspace",
+				".project",
+				".cproject",
+				"cscope.out"
+			],
+			"folder_exclude_patterns":
+			[
+				".settings",
+				"nuttx/arch/arm/src/board",
+				"nuttx/arch/arm/src/chip",
+				"build_*"
+			]
+		}
+	],
+	"settings":
+	{
+		"tab_size": 8,
+		"translate_tabs_to_spaces": false,
+		"highlight_line": true,
+		"AStyleFormatter":
+		{
+			"options_c":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			},
+			"options_c++":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			}
+		}
+	},
+	"build_systems":
+	[
+		{
+			"name": "PX4: make all",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload px4_fmu-v2_default -j8"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make posix",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make posix"],
+			"shell": true
+		},
+		{
+			"name": "MindPX_V2: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload mindpx-v2_default -j8"],
+			"shell": true
+		}
+	]
+}

Jenkinsfile

@@ -105,7 +105,6 @@ pipeline {
             ./emsdk activate latest;
             cd ..;
             . ./_emscripten_sdk/emsdk_env.sh;
-            git fetch --all --tags;
             make failsafe_web;
             cd build/px4_sitl_default_failsafe_web;
             mkdir -p failsafe_sim;
@@ -171,9 +170,9 @@ pipeline {
               sh('cp airframes.md PX4-user_guide/en/airframes/airframe_reference.md')
               sh('cp parameters.md PX4-user_guide/en/advanced_config/parameter_reference.md')
               sh('cp -R modules/*.md PX4-user_guide/en/modules/')
-              sh('cp -R graph_*.json PX4-user_guide/public/middleware/')  // vitepress
+              sh('cp -R graph_*.json PX4-user_guide/.vuepress/public/en/middleware/')
               sh('cp -R msg_docs/*.md PX4-user_guide/en/msg_docs/')
-              sh('cp -R failsafe_sim/* PX4-user_guide/public/config/failsafe')  // vitepress
+              sh('cp -R failsafe_sim/* PX4-user_guide/.vuepress/public/en/config/failsafe')
               sh('cd PX4-user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
               sh('cd PX4-user_guide; git push origin main || true')
               sh('rm -rf PX4-user_guide')
@@ -231,9 +230,7 @@ pipeline {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
               // 'main' branch
               sh('rm -f px4_msgs/msg/*.msg')
-              sh('rm -f px4_msgs/srv/*.srv')
               sh('cp msg/*.msg px4_msgs/msg/')
-              sh('cp srv/*.srv px4_msgs/srv/')
               sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
               sh('cd px4_msgs; git push origin main || true')
               sh('rm -rf px4_msgs')

Kconfig

@@ -185,17 +185,6 @@ menu "Serial ports"
         string "EXT2 tty port"
 endmenu
 
-menu "File paths"
-
-    config BOARD_ROOT_PATH
-        string "PX4 Root file path"
-        default "/fs/microsd"
-
-    config BOARD_PARAM_FILE
-        string "Parameter file"
-        default "/fs/mtd_params"
-endmenu
-
 menu "drivers"
 source "src/drivers/Kconfig"
 endmenu

Makefile

@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2015 - 2024 PX4 Development Team. All rights reserved.
+# Copyright (c) 2015 - 2020 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -169,7 +169,7 @@ endif
 
 # Pick up specific Python path if set
 ifdef PYTHON_EXECUTABLE
-	override CMAKE_ARGS += -DPython_EXECUTABLE=${PYTHON_EXECUTABLE}
+	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif
 
 # Functions
@@ -266,6 +266,7 @@ px4fmu_firmware: \
 
 misc_qgc_extra_firmware: \
 	check_nxp_fmuk66-v3_default \
+	check_nxp_fmurt1062-v1_default \
 	check_mro_x21_default \
 	check_bitcraze_crazyflie_default \
 	check_bitcraze_crazyflie21_default \
@@ -323,37 +324,7 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-bootloaders_update: \
-	3dr_ctrl-zero-h7-oem-revg_bootloader \
-	ark_fmu-v6x_bootloader \
-	ark_fpv_bootloader \
-	ark_pi6x_bootloader \
-	cuav_nora_bootloader \
-	cuav_x7pro_bootloader \
-	cuav_7-nano_bootloader \
-	cubepilot_cubeorange_bootloader \
-	cubepilot_cubeorangeplus_bootloader \
-	hkust_nxt-dual_bootloader \
-	hkust_nxt-v1_bootloader \
-	holybro_durandal-v1_bootloader \
-	holybro_kakuteh7_bootloader \
-	holybro_kakuteh7mini_bootloader \
-	holybro_kakuteh7v2_bootloader \
-	matek_h743_bootloader \
-	matek_h743-mini_bootloader \
-	matek_h743-slim_bootloader \
-        micoair_h743_bootloader \
-        micoair_h743-aio_bootloader \
-	modalai_fc-v2_bootloader \
-	mro_ctrl-zero-classic_bootloader \
-	mro_ctrl-zero-h7_bootloader \
-	mro_ctrl-zero-h7-oem_bootloader \
-	mro_pixracerpro_bootloader \
-	px4_fmu-v6c_bootloader \
-	px4_fmu-v6u_bootloader \
-	px4_fmu-v6x_bootloader \
-	px4_fmu-v6xrt_bootloader \
-	siyi_n7_bootloader
+bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
 .PHONY: coverity_scan
@@ -384,9 +355,9 @@ doxygen:
 	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
 	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll
 
-# Style
+# Astyle
 # --------------------------------------------------------------------
-.PHONY: check_format format check_newlines
+.PHONY: check_format format
 
 check_format:
 	$(call colorecho,'Checking formatting with astyle')
@@ -397,10 +368,6 @@ format:
 	$(call colorecho,'Formatting with astyle')
 	@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix
 
-check_newlines:
-	$(call colorecho,'Checking for missing or duplicate newlines at the end of files')
-	@"$(SRC_DIR)"/Tools/astyle/check_newlines.sh
-
 # Testing
 # --------------------------------------------------------------------
 .PHONY: tests tests_coverage tests_mission tests_mission_coverage tests_offboard tests_avoidance
@@ -554,14 +521,14 @@ distclean:
 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
 %:
 	$(if $(filter $(FIRST_ARG),$@), \
-		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) list_config_targets' to get a list of all possible [configuration] targets."),@#)
+		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) help|list_config_targets' to get a list of all possible [configuration] targets."),@#)
 
 # Print a list of non-config targets (based on http://stackoverflow.com/a/26339924/1487069)
 help:
 	@echo "Usage: $(MAKE) <target>"
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
-		awk -v RS= -F: '/(^|\n)# Files(\n|$$)/,/(^|\n)# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
+		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
 		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"

README.md

@@ -63,9 +63,8 @@ Note: This is the source of truth for the active maintainers of PX4 ecosystem.
 | Multirotor | [Matthias Grob](https://github.com/MaEtUgR) |
 | Fixed Wing | [Thomas Stastny](https://github.com/tstastny) |
 | Hybrid VTOL | [Silvan Fuhrer](https://github.com/sfuhrer) |
-| Rover | [Christian Friedrich](https://github.com/chfriedrich98) |
 | Boat | x |
-
+| Rover | x |
 
 See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and the [contributors list](https://github.com/PX4/PX4-Autopilot/graphs/contributors) (Github). However it may be not up to date.
 
@@ -104,7 +103,7 @@ These boards fully comply with Pixhawk Standard, and are maintained by the PX4-A
 
 These boards are maintained to be compatible with PX4-Autopilot by the Manufacturers.
 
-* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/ark_v6x.html)
+* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/arkv6x.html)
 * [CubePilot Cube Orange+](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orangeplus.html)
 * [CubePilot Cube Orange](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orange.html)
 * [CubePilot Cube Yellow](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_yellow.html)
@@ -119,7 +118,7 @@ These boards don't fully comply industry standards, and thus is solely maintaine
 
 ### Experimental
 
-These boards are not maintained by PX4 team nor Manufacturer, and is not guaranteed to be compatible with up to date PX4 releases.
+These boards are nor maintained by PX4 team nor Manufacturer, and is not guaranteed to be compatible with up to date PX4 releases.
 
 * [Raspberry PI with Navio 2](https://docs.px4.io/main/en/flight_controller/raspberry_pi_navio2.html)
 * [Bitcraze Crazyflie 2.0](https://docs.px4.io/main/en/complete_vehicles/crazyflie2.html)

ROMFS/CMakeLists.txt

@@ -120,21 +120,17 @@ add_custom_command(
 		${romfs_gen_root_dir}/init.d/rc.serial
 		${romfs_gen_root_dir}/init.d/rc.autostart
 		${romfs_gen_root_dir}/init.d/rc.autostart.post
-		${romfs_gen_root_dir}/init.d/rc.filepaths
 		${romfs_copy_stamp}
 	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
 		--airframes-path ${romfs_gen_root_dir}/init.d
 		--start-script ${romfs_gen_root_dir}/init.d/rc.autostart
 		--board ${PX4_BOARD}
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
 		--rc-dir ${romfs_gen_root_dir}/init.d
 		--serial-ports ${board_serial_ports} ${added_arguments}
 		--config-files ${module_config_files} #--verbose
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/filepaths/generate_config.py
-		--rc-dir ${romfs_gen_root_dir}/init.d
-		--params-file ${CONFIG_BOARD_PARAM_FILE}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_copy_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}
 	DEPENDS ${romfs_tar_file}
@@ -324,13 +320,12 @@ add_custom_target(romfs_gen_files_target
 	DEPENDS
 		${romfs_copy_stamp}
 		${romfs_gen_root_dir}/init.d/rc.serial
-		${romfs_gen_root_dir}/init.d/rc.filepaths
 		romfs_extras.stamp
 	)
 
 add_custom_command(
 	OUTPUT romfs_pruned.stamp
-	COMMAND ${Python_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py --folder ${romfs_gen_root_dir} --board ${PX4_BOARD}
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py --folder ${romfs_gen_root_dir} --board ${PX4_BOARD}
 	COMMAND ${CMAKE_COMMAND} -E touch romfs_pruned.stamp
 	DEPENDS
 		romfs_copy.stamp

ROMFS/cannode/init.d/rcS

@@ -21,14 +21,25 @@ set R /
 #
 ver all
 
-# Load param file location from kconfig
-. ${R}etc/init.d/rc.filepaths
+if mft query -q -k MTD -s MTD_PARAMETERS -v /fs/mtd_params
+then
+	set PARAM_FILE /fs/mtd_params
+fi
+
+if mft query -q -k MTD -s MTD_PARAMETERS -v /dev/eeeprom0
+then
+	set PARAM_FILE /dev/eeeprom0
+fi
+
+if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
+then
+	set PARAM_FILE /mnt/qspi/params
+fi
 
 #
 # Load parameters.
 #
 param select $PARAM_FILE
-
 if ! param load
 then
 	param reset_all

ROMFS/px4fmu_common/init.d-posix/airframes/10017_jmavsim_iris

@@ -29,3 +29,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+

ROMFS/px4fmu_common/init.d-posix/airframes/10018_gazebo-classic_iris_foggy_lidar

@@ -30,3 +30,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
 param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10019_gazebo-classic_omnicopter

@@ -94,3 +94,4 @@ param set-default CA_METHOD 0
 # disable attitude failure detection
 param set-default FD_FAIL_P 0
 param set-default FD_FAIL_R 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/10030_gazebo-classic_px4vision

@@ -12,3 +12,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -19,18 +19,21 @@ param set-default SENS_EN_MAGSIM 1
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -21,8 +21,12 @@ param set-default SENS_EN_ARSPDSIM 1
 param set-default CBRK_USB_CHK 197848
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
-param set-default SIH_T_MAX 6
+param set-default BAT_N_CELLS 3
+
+param set-default SIH_T_MAX 6.0
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
 param set-default SIH_IYY 0.0144
@@ -41,9 +45,9 @@ param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TRQ_P 1.0
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TRQ_Y 1.0
 param set-default CA_SV_CS2_TYPE 4
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 202

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -30,15 +30,19 @@ param set-default MAV_TYPE 19
 # disable some checks to allow to fly:
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
-param set-default SIH_T_MAX 2
+param set-default BAT_N_CELLS 3
+
+param set-default SIH_T_MAX 2.0
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2
 # IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
 param set-default SIH_IXX 0.00354
 param set-default SIH_IYY 0.000625
 param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0
+param set-default SIH_IXZ 0.0
 param set-default SIH_KDV 0.2
 param set-default SIH_L_ROLL 0.145
 

ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo-classic_iris_opt_flow

@@ -47,5 +47,5 @@ param set-default MPC_ALT_MODE 2
 
 param set-default SENS_FLOW_ROT 6
 param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 15
+param set-default SENS_FLOW_MAXHGT 3.0
 param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1012_gazebo-classic_iris_rplidar

@@ -30,3 +30,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
 param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1013_gazebo-classic_iris_vision

@@ -5,7 +5,7 @@
 # @type Quadrotor Wide
 #
 
-. ${R}etc/init.d-posix/airframes/10015_gazebo-classic_iris
+. ${R}etc/init.d-posix/airframes/10016_gazebo-classic_iris
 
 # EKF2: Vision position and heading, no GPS
 param set-default EKF2_EV_DELAY 5
@@ -18,3 +18,4 @@ param set-default LPE_FUSION 132
 
 # AEQ: External heading set to use vision input
 param set-default ATT_EXT_HDG_M 1
+

ROMFS/px4fmu_common/init.d-posix/airframes/1021_gazebo-classic_uuv_hippocampus

@@ -8,36 +8,37 @@
 param set-default CA_AIRFRAME 7
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY 0
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY -0.3
-param set-default CA_ROTOR0_PZ -0.3
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 0
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY 0.3
-param set-default CA_ROTOR1_PZ -0.3
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 0
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX 0
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.3
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY 0
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX 0
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.3
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY 0.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.0000
+param set-default CA_ROTOR0_PY -0.3000
+param set-default CA_ROTOR0_PZ -0.3000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 0.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.0000
+param set-default CA_ROTOR1_PY 0.3000
+param set-default CA_ROTOR1_PZ -0.3000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 0.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX 0.0000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.3000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY 0.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX 0.0000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.3000
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+

ROMFS/px4fmu_common/init.d-posix/airframes/1022_gazebo-classic_uuv_bluerov2_heavy

@@ -9,49 +9,49 @@ param set-default CA_AIRFRAME 7
 
 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY -1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.3
-param set-default CA_ROTOR0_PZ 0.2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0.5
-param set-default CA_ROTOR1_PY -0.3
-param set-default CA_ROTOR1_PZ 0.2
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.2
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY -1
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.2
-param set-default CA_ROTOR4_AZ -1
-param set-default CA_ROTOR4_KM 0
-param set-default CA_ROTOR4_PX 0.5
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR5_AZ 1
-param set-default CA_ROTOR5_KM 0
-param set-default CA_ROTOR5_PX 0.5
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR6_AZ 1
-param set-default CA_ROTOR6_KM 0
-param set-default CA_ROTOR6_PX -0.5
-param set-default CA_ROTOR6_PY 0.5
-param set-default CA_ROTOR7_KM 0
-param set-default CA_ROTOR7_PX -0.5
-param set-default CA_ROTOR7_PY -0.5
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -61,3 +61,4 @@ param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106
 param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108
+

ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo-classic_plane

@@ -54,9 +54,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -68,3 +68,5 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
+

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam

@@ -39,6 +39,7 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
@@ -56,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult

@@ -41,6 +41,7 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
@@ -56,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -70,3 +71,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -24,6 +24,7 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -41,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -55,3 +56,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -24,6 +24,7 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -41,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo-classic_techpod

@@ -40,9 +40,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -54,3 +54,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -24,6 +24,7 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -41,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -55,3 +56,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo-classic_believer

@@ -48,9 +48,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
@@ -62,3 +62,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider

@@ -39,6 +39,7 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
@@ -54,9 +55,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -23,7 +23,9 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -45,9 +47,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1039_gazebo-classic_advanced_plane

@@ -45,9 +45,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1040_gazebo-classic_standard_vtol

@@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
@@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
@@ -47,8 +47,6 @@ param set-default PWM_MAIN_FUNC6 201
 param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 
-param set-default FW_AIRSPD_MAX 25
-param set-default FW_THR_ASPD_MAX 0.4
 param set-default NPFG_PERIOD 12
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
@@ -64,17 +62,19 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
 param set-default MC_AIRMODE 1
-param set-default MC_ROLL_P 4
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
-param set-default MC_YAWRATE_P 0.3
-
 
 param set-default MIS_TAKEOFF_ALT 10
 
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
 param set-default NAV_ACC_RAD 5
 
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_FWD_THRUST_SC 1
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_TYPE 2
+

ROMFS/px4fmu_common/init.d-posix/airframes/1041_gazebo-classic_tailsitter

@@ -50,11 +50,11 @@ param set-default SENS_IMU_MODE 1
 
 param set-default FW_P_TC 0.6
 
-param set-default FW_PR_FF 0.0
+param set-default FW_PR_FF 0.1
 param set-default FW_PSP_OFF 2
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_I 0.2
-param set-default FW_RR_P 0.5
+param set-default FW_RR_P 0.3
 param set-default FW_THR_TRIM 0.35
 param set-default FW_THR_MAX 0.8
 param set-default FW_THR_MIN 0.05
@@ -66,6 +66,8 @@ param set-default FW_T_SINK_MIN 1.6
 param set-default MC_AIRMODE 1
 param set-default MC_ROLL_P 3
 param set-default MC_PITCH_P 3
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_PITCHRATE_P 0.3
 
 param set-default VT_ARSP_TRANS 10
 param set-default VT_B_TRANS_DUR 5
@@ -75,3 +77,4 @@ param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_TYPE 0
 
 param set-default WV_EN 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1042_gazebo-classic_tiltrotor

@@ -31,7 +31,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_TL_COUNT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo-classic_standard_vtol_drop

@@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
@@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
@@ -88,3 +88,4 @@ param set-default PWM_MAIN_FUNC11 422
 param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar

@@ -39,6 +39,7 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
@@ -56,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1045_gazebo-classic_quadtailsitter

@@ -33,7 +33,7 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 0
 
-param set-default FD_FAIL_R 70
+parm set-default FD_FAIL_R 70
 
 param set-default FW_P_TC 0.6
 

ROMFS/px4fmu_common/init.d-posix/airframes/1060_gazebo-classic_rover

@@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
 
 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
+param set-default GND_WHEEL_BASE 2.0
 
 param set-default CA_AIRFRAME 5
 
@@ -31,3 +31,4 @@ param set-default PWM_MAIN_FUNC1 201
 param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
+

ROMFS/px4fmu_common/init.d-posix/airframes/1061_gazebo-classic_r1_rover

@@ -4,9 +4,31 @@
 # @type Rover
 # @class Rover
 
-. ${R}etc/init.d/rc.rover_differential_defaults
+. ${R}etc/init.d/rc.rover_defaults
 
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
+
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
+
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
+
+param set-default CA_AIRFRAME 6
+
+param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102
+

ROMFS/px4fmu_common/init.d-posix/airframes/1062_flightgear_tf-r1

@@ -29,7 +29,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
 
 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 3
+param set-default GND_WHEEL_BASE 3.0
 
 param set-default CA_AIRFRAME 5
 
@@ -38,3 +38,4 @@ param set-default PWM_MAIN_FUNC1 201
 param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
+

ROMFS/px4fmu_common/init.d-posix/airframes/1070_gazebo-classic_boat

@@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
 
 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
+param set-default GND_WHEEL_BASE 2.0
 
 param set-default CA_AIRFRAME 9
 
@@ -41,3 +41,4 @@ param set-default CA_R_REV 3
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
+

ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1

@@ -14,7 +14,7 @@
 
 param set-default FW_AIRSPD_STALL 8
 
-param set-default FW_P_RMAX_NEG 20
+param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1
 
@@ -37,7 +37,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30
 
-param set-default FW_MAN_R_MAX 30
+param set-default FW_MAN_R_MAX 30.0
 
 param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
@@ -64,3 +64,4 @@ param set-default PWM_MAIN_FUNC4 203
 param set-default PWM_MAIN_FUNC5 407
 param set-default PWM_MAIN_FUNC6 408
 param set-default PWM_MAIN_FUNC7 409
+

ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2

@@ -14,7 +14,7 @@
 
 param set-default FW_AIRSPD_STALL 5
 
-param set-default FW_P_RMAX_NEG 20
+param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1
 
@@ -29,9 +29,9 @@ param set-default NAV_LOITER_RAD 50
 # Parameters related to autogyro takeoff PR
 #param set-default AG_TKOFF 1
 #param set-default AG_PROT_TYPE 1
-#param set-default AG_PROT_MIN_RPM 50
-#param set-default AG_PROT_TRG_RPM 900
-#param set-defoult AG_ROTOR_RPM 900
+#param set-default AG_PROT_MIN_RPM 50.0
+#param set-default AG_PROT_TRG_RPM 900.0
+#param set-defoult AG_ROTOR_RPM 900.0
 
 param set-default FW_ARSP_SCALE_EN 0
 
@@ -42,7 +42,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30
 
-param set-default FW_MAN_R_MAX 30
+param set-default FW_MAN_R_MAX 30.0
 
 param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
@@ -69,3 +69,4 @@ param set-default PWM_MAIN_FUNC4 203
 param set-default PWM_MAIN_FUNC5 407
 param set-default PWM_MAIN_FUNC6 408
 param set-default PWM_MAIN_FUNC7 409
+

ROMFS/px4fmu_common/init.d-posix/airframes/2507_gazebo-classic_cloudship

@@ -14,21 +14,21 @@
 param set-default CA_AIRFRAME 9
 
 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PY -2
-param set-default CA_ROTOR2_AY -1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -10
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000
 
 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1
+param set-default CA_SV_CS0_TRQ_P 1.0000
 
 param set-default CA_R_REV 7
 
@@ -36,3 +36,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 103
+

ROMFS/px4fmu_common/init.d-posix/airframes/3011_jsbsim_hexarotor_x

@@ -13,9 +13,9 @@ param set-default MAV_TYPE 13
 
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6
+param set-default MC_PITCH_P 6.0
 param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6
+param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
 
@@ -27,11 +27,11 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2
 
 
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5

ROMFS/px4fmu_common/init.d-posix/airframes/4001_gz_x500

@@ -52,4 +52,3 @@ param set-default SIM_GZ_EC_MAX3 1000
 param set-default SIM_GZ_EC_MAX4 1000
 
 param set-default MPC_THR_HOVER 0.60
-param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -24,33 +24,33 @@ param set-default FW_LND_ANG 8
 param set-default NPFG_PERIOD 12
 
 param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.2
+param set-default FW_PR_FF 0.5
 param set-default FW_PR_I 0.5
 param set-default TRIM_PITCH -0.15
 
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.4
-param set-default FW_RR_I 0.7
-
-param set-default FW_R_RMAX 56.15
-
-param set-default FW_YR_FF 0.3
-param set-default FW_YR_P 1.3
-param set-default FW_YR_I 0.7
-
-param set-default FW_PSP_OFF 0
+param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MIN -15
 
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
 param set-default FW_SPOILERS_LND 0.4
 
-param set-default FW_T_CLMB_MAX 5
-param set-default FW_T_SINK_MAX 3.5
-param set-default FW_T_SINK_MIN 3
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
-param set-default FD_ESCS_EN 0
-
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
@@ -70,9 +70,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol

@@ -40,8 +40,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default SIM_GZ_EC_FUNC1 101
@@ -66,6 +66,7 @@ param set-default SIM_GZ_SV_FUNC2 202
 param set-default SIM_GZ_SV_FUNC3 203
 
 param set-default COM_RC_IN_MODE 1
+param set-default ASPD_PRIMARY 1
 
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 1
@@ -73,9 +74,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 
-param set-default NPFG_PERIOD 12
+param set-default FW_L1_PERIOD 12
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
@@ -101,9 +102,8 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
-param set-default NAV_DLL_ACT 2
 
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.3
+param set-default VT_F_TRANS_THR 0.75
 param set-default VT_TYPE 2
 param set-default FD_ESCS_EN 0

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -52,8 +52,12 @@ param set-default MAV_1_MODE 9
 # param set-default SER_TEL1_BAUD 921600	Not found
 
 # Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
 param set-default MC_ACRO_P_MAX 200
 param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
 param set-default MC_ACRO_Y_MAX 150
 param set-default MC_PITCHRATE_D 0.0015
 param set-default MC_ROLLRATE_D 0.0015
@@ -75,6 +79,7 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters
@@ -96,22 +101,39 @@ param set-default IMU_GYRO_CUTOFF 100
 
 # Power Parameters
 param set-default BAT1_N_CELLS 4
+# param set-default BAT1_A_PER_V 36.364		Not found
+# param set-default BAT1_V_DIV 18.182		Not found
+
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default THR_MDL_FAC 0.3
 
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
 
+# Outputs
+# param set-default PWM_AUX_FUNC1 101
+# param set-default PWM_AUX_FUNC2 102
+# param set-default PWM_AUX_FUNC3 103
+# param set-default PWM_AUX_FUNC4 104
+
+# param set-default PWM_MAIN_FUNC1 101
+# param set-default PWM_MAIN_FUNC2 102
+# param set-default PWM_MAIN_FUNC3 103
+# param set-default PWM_MAIN_FUNC4 104
+
 param set-default SIM_GZ_EC_FUNC1 101
 param set-default SIM_GZ_EC_FUNC2 102
 param set-default SIM_GZ_EC_FUNC3 103
@@ -127,4 +149,4 @@ param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
 
-param set-default NAV_DLL_ACT 2
+

ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane

@@ -16,36 +16,39 @@ param set-default SENS_EN_MAGSIM 1
 param set-default SENS_EN_ARSPDSIM 1
 
 param set-default FW_LND_ANG 8
+param set-default NPFG_PERIOD 12
 
-param set-default FW_PR_FF 0.08
-param set-default FW_PR_I 0.3
-param set-default FW_PR_P 0.08
-
-param set-default FW_RR_FF 0.05
-param set-default FW_RR_I 0.2
-param set-default FW_RR_P 0.03
-
-param set-default FW_YR_FF 0.3
-param set-default FW_YR_I 0.4
-param set-default FW_YR_P 0.2
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
 
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
 
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
 param set-default FW_SPOILERS_LND 0.4
 
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
 
-param set-default FW_T_CLMB_R_SP 5
-param set-default FW_T_CLMB_MAX 6
+param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
@@ -53,15 +56,16 @@ param set-default RWTO_TKOFF 1
 param set-default CA_AIRFRAME 1
 
 param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
 
 param set-default CA_SV_CS_COUNT 6
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -1,56 +0,0 @@
-#!/bin/sh
-# @name Aion Robotics R1 Rover
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAX_ACCEL 5
-param set-default RD_MAX_DECEL 10
-param set-default RD_MAX_JERK 30
-param set-default RD_MAX_THR_YAW_R 1.5
-param set-default RD_YAW_RATE_P 0.25
-param set-default RD_YAW_RATE_I 0.01
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_SPEED 2
-param set-default RD_MAX_THR_SPD 2.15
-param set-default RD_SPEED_P 0.1
-param set-default RD_SPEED_I 0.01
-param set-default RD_MAX_YAW_RATE 180
-param set-default RD_MISS_SPD_DEF 2
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-param set-default RD_MAX_YAW_ACCEL 1000
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
-param set-default PP_LOOKAHD_GAIN 1
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
-
-# Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 70
-param set-default SIM_GZ_WH_MAX1 130
-param set-default SIM_GZ_WH_DIS1 100
-
-param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 70
-param set-default SIM_GZ_WH_MAX2 130
-param set-default SIM_GZ_WH_DIS2 100
-
-param set-default SIM_GZ_WH_REV 1 # reverse right wheel

ROMFS/px4fmu_common/init.d-posix/airframes/4010_gz_x500_mono_cam

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 mono cam
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_mono_cam}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -1,94 +0,0 @@
-#!/bin/sh
-# @name Gazebo lawnmower
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=lawnmower}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
-# We can arm and drive in manual mode when it slides and GPS check fails:
-param set-default COM_ARM_WO_GPS 1
-
-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_YAW_RATE_I 0.1
-param set-default RD_YAW_RATE_P 5
-param set-default RD_MAX_ACCEL 1
-param set-default RD_MAX_JERK 3
-param set-default RD_MAX_SPEED 8
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_YAW_RATE 30
-param set-default RD_MISS_SPD_DEF 8
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
-param set-default PP_LOOKAHD_GAIN 1
-
-# Actuator mapping - set SITL motors/servos output parameters:
-
-# "Motors" - motor channels 0 (Right) and 1 (Left) - via Wheels GZ bridge:
-param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-#param set-default SIM_GZ_WH_MIN1 0
-#param set-default SIM_GZ_WH_MAX1 200
-#param set-default SIM_GZ_WH_DIS1 100
-#param set-default SIM_GZ_WH_FAIL1 100
-
-param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-#param set-default SIM_GZ_WH_MIN2 0
-#param set-default SIM_GZ_WH_MAX2 200
-#param set-default SIM_GZ_WH_DIS2 100
-#param set-default SIM_GZ_WH_FAIL2 100
-
-param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
-
-# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation.
-# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate
-# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator
-# controls in practical scenarios.
-
-# Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):
-param set-default SIM_GZ_SV_FUNC3 203
-param set-default SIM_GZ_SV_MIN3 0
-param set-default SIM_GZ_SV_MAX3 1000
-param set-default SIM_GZ_SV_DIS3 500
-param set-default SIM_GZ_SV_FAIL3 500
-
-# Gas engine throttle, PCA9685 servo channel 4, "RC AUX1" (407) - left knob, or "Servo 4" (204):
-#    - on minimum when disarmed or failed:
-param set-default SIM_GZ_SV_FUNC4 204
-param set-default SIM_GZ_SV_MIN4 0
-param set-default SIM_GZ_SV_MAX4 1000
-param set-default SIM_GZ_SV_DIS4 500
-param set-default SIM_GZ_SV_FAIL4 500
-
-# Controlling PCA9685 servos 5,6,7,8 directly via "Servo 5..8" setting, by publishing actuator_servos.control[]:
-
-# Strobes, PCA9685 servo channel 5, "Servo 5" (205) - flashing indicates Mission mode:
-#param set-default SIM_GZ_SV_FUNC5 205
-#param set-default SIM_GZ_SV_MIN5 1000
-#param set-default SIM_GZ_SV_MAX5 2000
-#param set-default SIM_GZ_SV_DIS5 1000
-#param set-default SIM_GZ_SV_FAIL5 1000
-
-# Horn, PCA9685 servo channel 6, "Servo 6" (206) - for alarms like GPS failure:
-#param set-default SIM_GZ_SV_FUNC6 206
-
-# Spare PCA9685 servo channel 7 on "RC AUX2" (408) - right knob, or "Servo 7" (207):
-#param set-default SIM_GZ_SV_FUNC7 207
-
-# Spare PCA9685 servo channel 8 - "Servo 8" (208):
-#param set-default SIM_GZ_SV_FUNC8 208

ROMFS/px4fmu_common/init.d-posix/airframes/4012_gz_rover_ackermann

@@ -1,51 +0,0 @@
-#!/bin/sh
-# @name Rover Ackermann
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_ackermann_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_ackermann}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Rover parameters
-param set-default NAV_ACC_RAD 0.5
-param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 3
-param set-default RA_LAT_ACCEL_I 0.01
-param set-default RA_LAT_ACCEL_P 0.1
-param set-default RA_MAX_ACCEL 3
-param set-default RA_MAX_DECEL 6
-param set-default RA_MAX_JERK 15
-param set-default RA_MAX_LAT_ACCEL 4
-param set-default RA_MAX_SPEED 3
-param set-default RA_MAX_STR_ANG 0.5236
-param set-default RA_MAX_STR_RATE 360
-param set-default RA_MAX_THR_SPEED 3.1
-param set-default RA_SPEED_I 0.01
-param set-default RA_SPEED_P 0.1
-param set-default RA_WHEEL_BASE 0.321
-
-# Pure Pursuit parameters
-param set-default PP_LOOKAHD_GAIN 1
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
-
-# Wheels
-param set-default SIM_GZ_WH_FUNC1 101
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
-param set-default SIM_GZ_WH_DIS1 100
-
-# Steering
-param set-default SIM_GZ_SV_FUNC1 201
-param set-default SIM_GZ_SV_REV 1

ROMFS/px4fmu_common/init.d-posix/airframes/4013_gz_x500_lidar_2d

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 lidar 2d
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_2d}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4014_gz_x500_mono_cam_down

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 mono cam
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_mono_cam_down}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4015_gz_r1_rover_mecanum

@@ -1,64 +0,0 @@
-#!/bin/sh
-# @name Aion Robotics R1 Rover
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_mecanum_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover_mecanum}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Rover parameters
-param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAN_YAW_SCALE 0.1
-param set-default RM_YAW_RATE_I 0
-param set-default RM_YAW_RATE_P 0.01
-param set-default RM_MAX_ACCEL 3
-param set-default RM_MAX_JERK 5
-param set-default RM_MAX_SPEED 4
-param set-default RM_MAX_THR_SPD 7
-param set-default RM_MAX_THR_YAW_R 7.5
-param set-default RM_YAW_P 5
-param set-default RM_YAW_I 0.1
-param set-default RM_MAX_YAW_RATE 180
-param set-default RM_MISS_SPD_DEF 3
-param set-default RM_MISS_VEL_GAIN 1
-param set-default RM_SPEED_I 0.01
-param set-default RM_SPEED_P 0.1
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-param set-default PP_LOOKAHD_GAIN 0.5
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
-
-# Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
-param set-default SIM_GZ_WH_DIS1 100
-
-param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
-param set-default SIM_GZ_WH_DIS2 100
-
-param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
-param set-default SIM_GZ_WH_MIN3 0
-param set-default SIM_GZ_WH_MAX3 200
-param set-default SIM_GZ_WH_DIS3 100
-
-param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
-param set-default SIM_GZ_WH_MIN4 0
-param set-default SIM_GZ_WH_MAX4 200
-param set-default SIM_GZ_WH_DIS4 100
-
-param set-default SIM_GZ_WH_REV 10

ROMFS/px4fmu_common/init.d-posix/airframes/4016_gz_x500_lidar_down

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 lidar down
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_down}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4017_gz_x500_lidar_front

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 lidar front
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_front}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/6011_gazebo-classic_typhoon_h480

@@ -9,14 +9,14 @@
 
 param set-default MAV_TYPE 13
 
-param set-default MC_PITCHRATE_P 0.08
-param set-default MC_PITCHRATE_I 0.04
-param set-default MC_PITCHRATE_D 0.001
-param set-default MC_PITCH_P 9
-param set-default MC_ROLLRATE_P 0.08
-param set-default MC_ROLLRATE_I 0.04
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_ROLL_P 9
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
 
@@ -31,11 +31,11 @@ param set-default MAV_PROTO_VER 2
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6
 
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5
@@ -63,3 +63,4 @@ param set-default PWM_MAIN_FUNC9 422
 # Landing gear
 param set-default PWM_MAIN_FUNC10 400
 param set-default PWM_MAIN_FUNC11 400
+

ROMFS/px4fmu_common/init.d-posix/airframes/8011_gz_omnicopter

@@ -119,3 +119,4 @@ param set-default CA_METHOD 0
 # disable attitude failure detection
 param set-default FD_FAIL_P 0
 param set-default FD_FAIL_R 0
+

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -80,15 +80,6 @@ px4_add_romfs_files(
 	4005_gz_x500_vision
 	4006_gz_px4vision
 	4008_gz_advanced_plane
-	4009_gz_r1_rover
-	4010_gz_x500_mono_cam
-	4011_gz_lawnmower
-	4012_gz_rover_ackermann
-	4013_gz_x500_lidar_2d
-	4014_gz_x500_mono_cam_down
-	4015_gz_r1_rover_mecanum
-	4016_gz_x500_lidar_down
-	4017_gz_x500_lidar_front
 
 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -29,7 +29,7 @@ mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_of
 mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
 
 # Onboard link to gimbal
-mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -f -m gimbal -o $udp_onboard_gimbal_port_remote
+mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
 
 # To display for SIH sitl
 if [ "$PX4_SIMULATOR" = "sihsim" ]; then

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -15,9 +15,6 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 	if [ -n "${PX4_HOME_LON}" ]; then
 		param set SIH_LOC_LON0 ${PX4_HOME_LON}
 	fi
-	if [ -n "${PX4_HOME_ALT}" ]; then
-		param set SIH_LOC_H0 ${PX4_HOME_ALT}
-	fi
 
 	if simulator_sih start; then
 
@@ -39,28 +36,40 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		exit 1
 	fi
 
-elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
-	# Use Gazebo
+elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" -eq "1" ]; then
 
-	echo "INFO  [init] Gazebo simulator"
 
-	# Only start up Gazebo if PX4_GZ_STANDALONE is not set.
-	if [ -z "${PX4_GZ_STANDALONE}" ]; then
+	# set local coordinate frame reference
+	if [ -n "${PX4_HOME_LAT}" ]; then
+		param set SIM_GZ_HOME_LAT ${PX4_HOME_LAT}
+	fi
 
-		# "gz sim" only available in Garden and later
+	if [ -n "${PX4_HOME_LON}" ]; then
+		param set SIM_GZ_HOME_LON ${PX4_HOME_LON}
+	fi
+
+	if [ -n "${PX4_HOME_ALT}" ]; then
+		param set SIM_GZ_HOME_ALT ${PX4_HOME_LON}
+	fi
+
+	# source generated gz_env.sh for GZ_SIM_RESOURCE_PATH
+	if [ -f ./gz_env.sh ]; then
+		. ./gz_env.sh
+
+	elif [ -f ../gz_env.sh ]; then
+		. ../gz_env.sh
+	fi
+
+	# Only start up Gazebo if STANDALONE set to false
+	if [ "$STANDALONE" != '1' ]; then
+
+		# "gz sim" only avaiilable in Garden and later
 		GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
 		if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
 		then
 			# "gz sim" from Garden on
 			gz_command="gz"
 			gz_sub_command="sim"
-
-			# Specify render engine if `GZ_SIM_RENDER_ENGINE` is set
-			# (for example, if you want to use Ogre 1.x instead of Ogre 2.x):
-			if [ -n "${PX4_GZ_SIM_RENDER_ENGINE}" ]; then
-				echo "INFO  [init] Setting Gazebo render engine to '${PX4_GZ_SIM_RENDER_ENGINE}'!"
-				gz_sub_command="${gz_sub_command} --render-engine ${PX4_GZ_SIM_RENDER_ENGINE}"
-			fi
 		else
 			echo "ERROR [init] Gazebo gz please install gz-garden"
 			exit 1
@@ -70,15 +79,7 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 		gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
 
 		# shellcheck disable=SC2153
-		if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
-
-			# source generated gz_env.sh for GZ_SIM_RESOURCE_PATH
-			if [ -f ./gz_env.sh ]; then
-				. ./gz_env.sh
-
-			elif [ -f ../gz_env.sh ]; then
-				. ../gz_env.sh
-			fi
+		if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
 
 			echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
 
@@ -90,70 +91,107 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 			fi
 
 		else
-			# Gazebo is already running, do not start the simulator, nor the GUI
 			echo "INFO  [init] gazebo already running world: ${gz_world}"
 			PX4_GZ_WORLD=${gz_world}
 		fi
-	else
-		echo "INFO  [init] Standalone PX4 launch, waiting for Gazebo"
 	fi
 
 	# start gz_bridge
-	if [ -n "${PX4_SIM_MODEL#*gz_}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
+	if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
 		# model specified, gz_bridge will spawn model
 
 		if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
-			# model pose provided: [x, y, z, roll, pitch, yaw]
-
 			# Clean potential input line formatting.
 			model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
 			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
 
 		else
-			# model pose not provided, origin will be used
-
 			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
 			model_pose="0,0,0,0,0,0"
 		fi
 
 		# start gz bridge with pose arg.
-		if ! gz_bridge start -p "${model_pose}" -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
-			echo "ERROR [init] gz_bridge failed to start and spawn model"
+		if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+			if param compare -s SENS_EN_BAROSIM 1
+			then
+				sensor_baro_sim start
+			fi
+			if param compare -s SENS_EN_GPSSIM 1
+			then
+				sensor_gps_sim start
+			fi
+			if param compare -s SENS_EN_MAGSIM 1
+			then
+				sensor_mag_sim start
+			fi
+			if param compare -s SENS_EN_ARSPDSIM 1
+			then
+				sensor_airspeed_sim start
+			fi
+
+		else
+			echo "ERROR [init] gz_bridge failed to start"
 			exit 1
 		fi
 
-	elif [ -n "${PX4_GZ_MODEL_NAME}" ]; then
+	elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
 		# model name specificed, gz_bridge will attach to existing model
 
-		echo "INFO  [init] PX4_GZ_MODEL_NAME set, PX4 will attach to existing model"
-		if ! gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
-			echo "ERROR [init] gz_bridge failed to start and attach to existing model"
+		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
+			if param compare -s SENS_EN_BAROSIM 1
+			then
+				sensor_baro_sim start
+			fi
+			if param compare -s SENS_EN_GPSSIM 1
+			then
+				sensor_gps_sim start
+			fi
+			if param compare -s SENS_EN_MAGSIM 1
+			then
+				sensor_mag_sim start
+			fi
+			if param compare -s SENS_EN_ARSPDSIM 1
+			then
+				sensor_airspeed_sim start
+			fi
+
+		else
+			echo "ERROR [init] gz_bridge failed to start"
+			exit 1
+		fi
+
+	elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
+
+		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
+
+		if gz_bridge start -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+			if param compare -s SENS_EN_BAROSIM 1
+			then
+				sensor_baro_sim start
+			fi
+			if param compare -s SENS_EN_GPSSIM 1
+			then
+				sensor_gps_sim start
+			fi
+			if param compare -s SENS_EN_MAGSIM 1
+			then
+				sensor_mag_sim start
+			fi
+			if param compare -s SENS_EN_ARSPDSIM 1
+			then
+				sensor_airspeed_sim start
+			fi
+
+		else
+			echo "ERROR [init] gz_bridge failed to start"
 			exit 1
 		fi
 
 	else
-		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_SIM_MODEL"
+		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
 		exit 1
 	fi
 
-	# Start the sensor simulator modules
-	if param compare -s SENS_EN_BAROSIM 1
-	then
-		sensor_baro_sim start
-	fi
-	if param compare -s SENS_EN_GPSSIM 1
-	then
-		sensor_gps_sim start
-	fi
-	if param compare -s SENS_EN_MAGSIM 1
-	then
-		sensor_mag_sim start
-	fi
-	if param compare -s SENS_EN_ARSPDSIM 1
-	then
-		sensor_airspeed_sim start
-	fi
-
 elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then
 
 	echo "INFO  [init] jMAVSim simulator"
@@ -170,12 +208,6 @@ elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)"
 
 else
 	# otherwise start simulator (mavlink) module
-
-	# EKF2 specifics
-	param set-default EKF2_GPS_DELAY 10
-	param set-default EKF2_MULTI_IMU 3
-	param set-default SENS_IMU_MODE 0
-
 	simulator_tcp_port=$((4560+px4_instance))
 
 	# Check if PX4_SIM_HOSTNAME environment variable is empty

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -153,11 +153,11 @@ fi
 
 param set-default BAT1_N_CELLS 4
 
+param set-default CBRK_AIRSPD_CHK 0
 param set-default CBRK_SUPPLY_CHK 894281
 
 # disable check, no CPU load reported on posix yet
 param set-default COM_CPU_MAX -1
-param set-default COM_RAM_MAX -1
 
 # Don't require RC calibration and configuration
 param set-default COM_RC_IN_MODE 1
@@ -165,6 +165,10 @@ param set-default COM_RC_IN_MODE 1
 # Speedup SITL startup
 param set-default EKF2_REQ_GPS_H 0.5
 
+# Multi-EKF
+param set-default EKF2_MULTI_IMU 3
+param set-default SENS_IMU_MODE 0
+
 param set-default IMU_GYRO_FFT_EN 1
 param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets
 
@@ -181,8 +185,12 @@ param set-default TRIG_INTERFACE 3
 param set-default SYS_FAILURE_EN 1
 # Enable low-battery actions by default for (automated) testing. Battery sim
 # does not go below 50% by default, but failure injection can trigger failsafes.
-param set-default COM_LOW_BAT_ACT 3
+param set-default COM_LOW_BAT_ACT 2
 
+# Allow to override SYS_MC_EST_GROUP via env
+if [ -n "$SYS_MC_EST_GROUP" ]; then
+	param set SYS_MC_EST_GROUP $SYS_MC_EST_GROUP
+fi
 
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
@@ -190,11 +198,11 @@ if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	echo "COM_DL_LOSS_T set to $COM_DL_LOSS_T_LONGER"
 	param set COM_DL_LOSS_T $COM_DL_LOSS_T_LONGER
 
-	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
+	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
 	echo "COM_RC_LOSS_T set to $COM_RC_LOSS_T_LONGER"
 	param set COM_RC_LOSS_T $COM_RC_LOSS_T_LONGER
 
-	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
+	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
 	echo "COM_OF_LOSS_T set to $COM_OF_LOSS_T_LONGER"
 	param set COM_OF_LOSS_T $COM_OF_LOSS_T_LONGER
 
@@ -241,35 +249,13 @@ then
 fi
 
 load_mon start
-
-if param compare SIM_BAT_ENABLE 1
-then
-	battery_simulator start
-fi
-
+battery_simulator start
 tone_alarm start
 rc_update start
 manual_control start
 sensors start
 commander start
 
-#
-# state estimator selection
-if param compare -s EKF2_EN 1
-then
-	ekf2 start &
-fi
-
-if param compare -s LPE_EN 1
-then
-	local_position_estimator start
-fi
-
-if param compare -s ATT_EN 1
-then
-	attitude_estimator_q start
-fi
-
 if ! pwm_out_sim start -m sim
 then
 	tune_control play error
@@ -344,7 +330,7 @@ fi
 [ -e "$autostart_file".post ] && . "$autostart_file".post
 
 # Run script to start logging
-if param compare -s EKF2_EN 1
+if param compare SYS_MC_EST_GROUP 2
 then
 	set LOGGER_ARGS "-p ekf2_timestamps"
 else

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -34,94 +34,26 @@
 add_subdirectory(airframes)
 
 px4_add_romfs_files(
-
+	rc.airship_apps
+	rc.airship_defaults
 	rc.autostart_ext
-
-	rcS
-	rc.sensors
-	rc.vehicle_setup
-
-	# TODO
 	rc.balloon_apps
 	rc.balloon_defaults
-	rc.sysinit
+	rc.boat_defaults
+	rc.fw_apps
+	rc.fw_defaults
+	rc.heli_defaults
+	rc.logging
+	rc.mc_apps
+	rc.mc_defaults
+	rcS
+	rc.sensors
+	rc.thermal_cal
+	rc.rover_apps
+	rc.rover_defaults
+	rc.uuv_apps
+	rc.uuv_defaults
+	rc.vehicle_setup
+	rc.vtol_apps
+	rc.vtol_defaults
 )
-
-if(CONFIG_MODULES_AIRSHIP_ATT_CONTROL)
-	px4_add_romfs_files(
-		rc.airship_apps
-		rc.airship_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_FW_RATE_CONTROL)
-	px4_add_romfs_files(
-		rc.fw_apps
-		rc.fw_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_MC_RATE_CONTROL)
-	px4_add_romfs_files(
-		rc.heli_defaults
-		rc.mc_apps
-		rc.mc_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_POS_CONTROL)
-	px4_add_romfs_files(
-		rc.rover_apps
-		rc.rover_defaults
-
-		rc.boat_defaults # hack
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_DIFFERENTIAL)
-	px4_add_romfs_files(
-		rc.rover_differential_apps
-		rc.rover_differential_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_ACKERMANN)
-	px4_add_romfs_files(
-		rc.rover_ackermann_apps
-		rc.rover_ackermann_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_MECANUM)
-	px4_add_romfs_files(
-		rc.rover_mecanum_apps
-		rc.rover_mecanum_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_UUV_ATT_CONTROL)
-	px4_add_romfs_files(
-		rc.uuv_apps
-		rc.uuv_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_VTOL_ATT_CONTROL)
-	px4_add_romfs_files(
-		rc.vtol_apps
-		rc.vtol_defaults
-	)
-endif()
-
-
-if(CONFIG_MODULES_LOGGER)
-	px4_add_romfs_files(
-		rc.logging
-	)
-endif()
-
-if(CONFIG_MODULES_TEMPERATURE_COMPENSATION)
-	px4_add_romfs_files(
-		rc.thermal_cal
-	)
-endif()

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -11,28 +11,30 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+
 param set SYS_HITL 1
 
 param set UAVCAN_ENABLE 0
 
-# disable some checks to allow to fly
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default HIL_ACT_FUNC1 101
 param set-default HIL_ACT_FUNC2 102
 param set-default HIL_ACT_FUNC3 103
 param set-default HIL_ACT_FUNC4 104
+
+# disable some checks to allow to fly
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -14,6 +14,7 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+
 param set-default BAT1_N_CELLS 3
 
 param set-default COM_RC_IN_MODE 1
@@ -54,29 +55,26 @@ param set-default VT_TYPE 2
 
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_ROTOR4_PX 0.2
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 
 param set-default HIL_ACT_FUNC1 101
@@ -96,5 +94,9 @@ param set UAVCAN_ENABLE 0
 # disable some checks to allow to fly
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
 
 param set-default MAV_TYPE 22
+
+