mission_block: acquire gimbal control also when the command from the gimbal

protocol v2 is parsed

.ci/Jenkinsfile-hardware

@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {
 
   // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
 
   resetParameters()
 

.github/ISSUE_TEMPLATE/1_Bug_report.md

@@ -20,7 +20,7 @@ A clear and concise description of what you expected to happen.
 
 ## Log Files and Screenshots
 *Always* provide a link to the flight log file:
-- Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/main/en/getting_started/flight_reporting.html)).
+- Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
 - Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
 - Share the link to the log (Copy and paste the URL of the log)
 

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,17 +1,14 @@
-Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
+**How this PR solves the problem**
+Depending on how complex the PR is, something between a line and a few paragraphs with logs and videos.
 
-## Describe problem solved by this pull request
-A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
-E.g. For this use case I ran into...
+**JIRA ID in title, and link here**
+Add a link and the title of the JIRA for context
 
-## Describe your solution
-A clear and concise description of what you have implemented.
+**Upstream/develop PR that this was backported from**
+If applicable, link to PR and/or commit
 
-## Describe possible alternatives
-A clear and concise description of alternative solutions or features you've considered.
+**Critical bug that needs backporting?**
+Yes/No, link to backport PR when applicable
 
-## Test data / coverage
-How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
-
-## Additional context
+**Additional context**
 Add any other related context or media.

.github/workflows/cflite_batch.yml

@@ -1,34 +0,0 @@
-name: ClusterFuzzLite batch fuzzing
-on:
-  schedule:
-    - cron: '0 6 * * *'  # UTC 6am every day.
-permissions: read-all
-jobs:
-  BatchFuzzing:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        sanitizer:
-        - address
-        - undefined
-        - memory
-    steps:
-    - name: Build Fuzzers (${{ matrix.sanitizer }})
-      id: build
-      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
-      with:
-        sanitizer: ${{ matrix.sanitizer }}
-    - name: Run Fuzzers (${{ matrix.sanitizer }})
-      id: run
-      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        fuzz-seconds: 1800 # 30 mins
-        mode: 'batch'
-        sanitizer: ${{ matrix.sanitizer }}
-        # Optional but recommended: For storing certain artifacts from fuzzing.
-        # See later section on "Git repo for storage".
-        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
-        # storage-repo-branch: main   # Optional. Defaults to "main"
-        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".

.github/workflows/checks.yml

@@ -1,51 +0,0 @@
-name: Checks
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        check: [
-          "check_format",
-          "tests",
-          "tests_coverage",
-          "px4_fmu-v2_default stack_check",
-          "validate_module_configs",
-          "shellcheck_all",
-          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
-          "NO_NINJA_BUILD=1 px4_sitl_default",
-          "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
-          "airframe_metadata",
-          "module_documentation",
-          "parameters_metadata",
-        ]
-    container:
-      image: px4io/px4-dev-nuttx-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: ${{matrix.check}}
-      run: make ${{matrix.check}}
-    - name: upload coverage
-      if: contains(matrix.check, 'coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: unittests
-        file: coverage/lcov.info

.github/workflows/clang-tidy.yml

@@ -1,21 +0,0 @@
-name: Clang Tidy
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: make clang-tidy-quiet
-      run: make clang-tidy-quiet

.github/workflows/compile_linux.yml

@@ -1,54 +0,0 @@
-name: Linux Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          beaglebone_blue_default,
-          emlid_navio2_default,
-          px4_raspberrypi_default,
-          scumaker_pilotpi_default,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-    - name: ccache post-run
-      run: ccache -s

.github/workflows/compile_linux_arm64.yml

@@ -1,51 +0,0 @@
-name: Linux ARM64 Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          scumaker_pilotpi_arm64,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-    - name: ccache post-run
-      run: ccache -s

.github/workflows/compile_macos.yml

@@ -1,56 +0,0 @@
-name: MacOS build
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: macos-10.15
-    strategy:
-      matrix:
-        config: [
-          px4_fmu-v5_default,
-          px4_sitl
-          #tests, # includes px4_sitl
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: setup
-      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: macos_${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 40M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: |
-          ccache -z
-          make ${{matrix.config}}
-          ccache -s

.github/workflows/compile_nuttx.yml

@@ -1,126 +0,0 @@
-name: Nuttx Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-09-08
-    strategy:
-      fail-fast: false
-      matrix:
-        config: [
-          airmind_mindpx-v2,
-          ark_can-flow,
-          ark_can-gps,
-          ark_can-rtk-gps,
-          ark_cannode,
-          atl_mantis-edu,
-          av_x-v1,
-          bitcraze_crazyflie,
-          bitcraze_crazyflie21,
-          cuav_can-gps-v1,
-          cuav_nora,
-          cuav_x7pro,
-          cubepilot_cubeorange,
-          cubepilot_cubeyellow,
-          diatone_mamba-f405-mk2,
-          freefly_can-rtk-gps,
-          holybro_can-gps-v1,
-          holybro_durandal-v1,
-          holybro_kakutef7,
-          holybro_kakuteh7,
-          holybro_pix32v5,
-          matek_gnss-m9n-f4,
-          matek_h743,
-          matek_h743-mini,
-          matek_h743-slim,
-          modalai_fc-v1,
-          modalai_fc-v2,
-          mro_ctrl-zero-f7,
-          mro_ctrl-zero-f7-oem,
-          mro_ctrl-zero-h7,
-          mro_ctrl-zero-h7-oem,
-          mro_pixracerpro,
-          mro_x21,
-          mro_x21-777,
-          nxp_fmuk66-e,
-          nxp_fmuk66-v3,
-          nxp_fmurt1062-v1,
-          nxp_ucans32k146,
-          omnibus_f4sd,
-          px4_fmu-v2,
-          px4_fmu-v3,
-          px4_fmu-v4,
-          px4_fmu-v4pro,
-          px4_fmu-v5,
-          px4_fmu-v5x,
-          px4_fmu-v6c,
-          px4_fmu-v6u,
-          px4_fmu-v6x,
-          raspberrypi_pico,
-          sky-drones_smartap-airlink,
-          spracing_h7extreme,
-          uvify_core
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 120M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make all_variants_${{matrix.config}}
-      run: make all_variants_${{matrix.config}}
-      timeout-minutes: 45
-    - name: make ${{matrix.config}} bloaty_compileunits
-      run: make ${{matrix.config}} bloaty_compileunits || true
-    - name: make ${{matrix.config}} bloaty_inlines
-      run: make ${{matrix.config}} bloaty_inlines || true
-    - name: make ${{matrix.config}} bloaty_segments
-      run: make ${{matrix.config}} bloaty_segments || true
-    - name: make ${{matrix.config}} bloaty_symbols
-      run: make ${{matrix.config}} bloaty_symbols || true
-    - name: make ${{matrix.config}} bloaty_templates
-      run: make ${{matrix.config}} bloaty_templates || true
-    - name: make ${{matrix.config}} bloaty_ram
-      run: make ${{matrix.config}} bloaty_ram || true
-    - name: make ${{matrix.config}} bloaty_compare_master
-      run: make ${{matrix.config}} bloaty_compare_master || true
-    - name: ccache post-run
-      run: ccache -s
-
-    - name: Upload px4 package
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_package_${{matrix.config}}
-        path: |
-          build/**/*.px4
-          build/**/*.bin

.github/workflows/deploy_all.yml

@@ -1,54 +0,0 @@
-name: Deploy metadata for all targets
-
-on:
-  push:
-    branches:
-    - 'master'
-    - 'release/*'
-    - 'pr-metadata-test'
-
-jobs:
-  enumerate_targets:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    outputs:
-      matrix: ${{ steps.set-matrix.outputs.matrix }}
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-    - id: set-matrix
-      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
-  build:
-    runs-on: ubuntu-latest
-    needs: enumerate_targets
-    strategy:
-      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
-    container: px4io/px4-dev-${{ matrix.container }}:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: make ${{matrix.target}}
-      run: make ${{matrix.target}}
-
-    - name: parameter & events metadata
-      run: |
-        make ${{matrix.target}} ver_gen events_json actuators_json
-        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
-        cd build/${{ matrix.target }}
-        mkdir _metadata || true
-        cp parameters.* events/*.xz actuators.json* _metadata
-
-    - uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read
-      env:
-        AWS_S3_BUCKET: 'px4-travis'
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-        AWS_REGION: 'us-west-1'
-        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
-        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
-

.github/workflows/ekf_functional_change_indicator.yml

@@ -1,21 +0,0 @@
-name: EKF Change Indicator
-
-on: pull_request
-
-jobs:
-  unit_tests:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v2.3.1
-      with:
-        fetch-depth: 0
-    - name: checkout newest version of branch
-      run: |
-        git fetch origin pull/${{github.event.pull_request.number}}/head:${{github.head_ref}}
-        git checkout ${GITHUB_HEAD_REF}
-    - name: main test
-      run: make tests TESTFILTER=EKF
-    - name: Check if there is a functional change
-      run: git diff --exit-code
-      working-directory: src/modules/ekf2/test/change_indication

.github/workflows/ekf_update_change_indicator.yml

@@ -1,29 +0,0 @@
-name: EKF Update Change Indicator
-
-on: push
-
-jobs:
-  unit_tests:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    env:
-      GIT_COMMITTER_EMAIL: bot@px4.io
-      GIT_COMMITTER_NAME: PX4BuildBot
-    steps:
-    - uses: actions/checkout@v2.3.1
-      with:
-        fetch-depth: 0
-    - name: main test updates change indication files
-      run: make tests TESTFILTER=EKF
-    - name: Check if there exists diff and save result in variable
-      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_ENV
-      working-directory: src/modules/ekf2/test/change_indication
-    - name: auto-commit any changes to change indication
-      uses: stefanzweifel/git-auto-commit-action@v4
-      with:
-        commit_message: '[AUTO COMMIT] update change indication'
-        commit_user_name: ${GIT_COMMITTER_NAME}
-        commit_user_email: ${GIT_COMMITTER_EMAIL}
-    - if: ${{env.CHANGE_INDICATED}}
-      name: if there is a functional change, fail check
-      run: exit 1

.github/workflows/mavros_mission_tests.yml

@@ -1,139 +0,0 @@
-name: MAVROS Mission Tests
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {vehicle: "iris",          mission: "MC_mission_box",  build_type: "RelWithDebInfo"}
-          - {vehicle: "rover",         mission: "rover_mission_1", build_type: "RelWithDebInfo"}
-          #- {vehicle: "plane",         mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
-          #- {vehicle: "plane_catapult",mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
-          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "Coverage"}
-          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "AddressSanitizer"}
-          #- {vehicle: "tailsitter",    mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
-          #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
-
-    container:
-      image: px4io/px4-dev-ros-melodic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v2-preview
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: ecl EKF analysis
-      if: always()
-      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_mission
-        file: coverage/lcov.info

.github/workflows/mavros_offboard_tests.yml

@@ -1,134 +0,0 @@
-name: MAVROS Offboard Tests
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
-          #- {test_file: "mavros_posix_tests_offboard_attctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
-          #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
-
-    container:
-      image: px4io/px4-dev-ros-melodic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v2-preview
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: ecl EKF analysis
-      if: always()
-      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_offboard
-        file: coverage/lcov.info

.github/workflows/metadata.yml

@@ -1,157 +0,0 @@
-name: Metadata
-
-on:
-  push:
-    branches:
-    - 'master'
-    - 'release/*'
-    - 'pr-metadata-test'
-
-jobs:
-
-  airframe:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: airframe metadata
-      run: |
-        make airframe_metadata
-        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
-        cd build/px4_sitl_default/docs
-      # TODO: deploy to userguide gitbook
-
-    - uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read
-      env:
-        AWS_S3_BUCKET: 'px4-travis'
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-        AWS_REGION: 'us-west-1'
-        SOURCE_DIR: 'build/px4_sitl_default/docs/'
-        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
-
-  module:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: module documentation
-      run: |
-        make module_documentation
-        cd build/px4_sitl_default/docs
-        ls -ls *
-      # TODO: deploy to userguide gitbook and s3
-
-  parameter:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: parameter metadata
-      run: |
-        make parameters_metadata
-        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
-
-    - uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read
-      env:
-        AWS_S3_BUCKET: 'px4-travis'
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-        AWS_REGION: 'us-west-1'
-        SOURCE_DIR: 'build/px4_sitl_default/docs/'
-        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
-
-  events:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: events metadata
-      run: |
-        make extract_events
-        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
-        cd build/px4_sitl_default
-        mkdir _events_full || true
-        cp events/all_events_full.json.xz _events_full/all_events.json.xz
-
-    - uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read
-      env:
-        AWS_S3_BUCKET: 'px4-travis'
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-        AWS_REGION: 'us-west-1'
-        SOURCE_DIR: 'build/px4_sitl_default/_events_full/'
-        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
-
-  uorb_graph:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: uORB graph
-      run: |
-        make uorb_graphs
-        cd Tools/uorb_graph
-        ls -ls *
-      # TODO: deploy graph_px4_sitl.json to S3 px4-travis:Firmware/master/
-
-  micrortps_agent:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: microRTPS agent
-      run: |
-        make px4_sitl_rtps
-        git clone https://github.com/PX4/micrortps_agent.git
-        cp -R build/px4_sitl_rtps/src/modules/micrortps_bridge/micrortps_agent/* micrortps_agent
-
-  ROS_msgs:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: PX4 ROS msgs
-      run: |
-        git clone https://github.com/PX4/px4_msgs.git
-        python3 msg/tools/uorb_to_ros_msgs.py msg/ px4_msgs/msg/
-
-  ROS2_bridge:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: PX4 ROS2 bridge
-      run: |
-        git clone https://github.com/PX4/px4_ros_com.git
-        ./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml

.github/workflows/python_checks.yml

@@ -1,25 +0,0 @@
-name: Python CI Checks
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-    - name: Install Python3
-      run: sudo apt-get install python3 python3-setuptools python3-pip -y
-    - name: Install tools
-      run: pip3 install --user mypy types-requests flake8
-    - name: Check MAVSDK test scripts with mypy
-      run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
-    - name: Check MAVSDK test scripts with flake8
-      run: $HOME/.local/bin/flake8 test/mavsdk_tests/*.py

.github/workflows/sitl_tests.yml

@@ -1,135 +0,0 @@
-name: SITL Tests
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
-          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
-          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
-          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
-
-    container:
-      image: px4io/px4-dev-simulation-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: Download MAVSDK
-      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-    - name: Install MAVSDK
-      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      env:
-        PX4_HOME_LAT: ${{matrix.config.latitude}}
-        PX4_HOME_LON: ${{matrix.config.longitude}}
-        PX4_HOME_ALT: ${{matrix.config.altitude}}
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: make px4_sitl_default
-    - name: ccache post-run px4/firmware
-      run: ccache -s
-    - name: Build SITL Gazebo
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: make px4_sitl_default sitl_gazebo
-    - name: ccache post-run sitl_gazebo
-      run: ccache -s
-    - name: Build MAVSDK tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        DONT_RUN: 1
-      run: make px4_sitl_default gazebo mavsdk_tests
-    - name: ccache post-run mavsdk_tests
-      run: ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_HOME_LAT: ${{matrix.config.latitude}}
-        PX4_HOME_LON: ${{matrix.config.longitude}}
-        PX4_HOME_ALT: ${{matrix.config.altitude}}
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v2-preview
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v2-preview
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavsdk
-        file: coverage/lcov.info

.gitmodules

@@ -1,19 +1,19 @@
 [submodule "src/modules/mavlink/mavlink"]
 	path = src/modules/mavlink/mavlink
-	url = https://github.com/mavlink/mavlink.git
+	url = https://github.com/Auterion/mavlink.git
 	branch = master
 [submodule "src/drivers/uavcan/libuavcan"]
 	path = src/drivers/uavcan/libuavcan
 	url = https://github.com/dronecan/libuavcan.git
 	branch = main
-[submodule "Tools/simulation/jmavsim/jMAVSim"]
-	path = Tools/simulation/jmavsim/jMAVSim
+[submodule "Tools/jMAVSim"]
+	path = Tools/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
 	branch = master
-[submodule "Tools/simulation/gazebo/sitl_gazebo"]
-	path = Tools/simulation/gazebo/sitl_gazebo
-	url = https://github.com/PX4/PX4-SITL_gazebo.git
-	branch = master
+[submodule "Tools/sitl_gazebo"]
+	path = Tools/sitl_gazebo
+	url = git@github.com:Auterion/sitl_gazebo.git
+	branch = develop
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
@@ -31,10 +31,10 @@
 	url = https://github.com/PX4/NuttX-apps.git
 	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
-	path = Tools/simulation/flightgear/flightgear_bridge
+	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
-[submodule "Tools/simulation/jsbsim/jsbsim_bridge"]
-	path = Tools/simulation/jsbsim/jsbsim_bridge
+[submodule "Tools/jsbsim_bridge"]
+	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
 [submodule "src/drivers/cyphal/libcanard"]
 	path = src/drivers/cyphal/libcanard
@@ -53,6 +53,9 @@
 [submodule "src/lib/events/libevents"]
 	path = src/lib/events/libevents
 	url = https://github.com/mavlink/libevents.git
+[submodule "Tools/simulation-ignition"]
+	path = Tools/simulation-ignition
+	url = https://github.com/PX4/px4-simulation-ignition.git
 [submodule "src/lib/crypto/libtomcrypt"]
 	path = src/lib/crypto/libtomcrypt
 	url = https://github.com/PX4/libtomcrypt.git

.vscode/cmake-variants.yaml

@@ -2,15 +2,10 @@ CONFIG:
   default: px4_sitl_default
   choices:
     px4_sitl_default:
-      short: px4_sitl_default
+      short: px4_sitl
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
-    px4_sitl_ign:
-      short: px4_sitl_ign
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_ign
     px4_sitl_rtps:
       short: px4_sitl_rtps
       buildType: RelWithDebInfo

.vscode/tasks.json

@@ -54,7 +54,7 @@
             "type": "shell",
             "command": "ant create_run_jar copy_res",
             "options": {
-                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
+                "cwd": "${workspaceFolder}/Tools/jMAVSim"
             },
             "problemMatcher": [],
             "presentation":{
@@ -72,7 +72,7 @@
             "dependsOn": "jmavsim build",
             "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
             "options": {
-                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
+                "cwd": "${workspaceFolder}/Tools/jMAVSim/out/production",
                 "env": {
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
@@ -86,7 +86,23 @@
                 "showReuseMessage": false,
                 "clear": false
             },
-            "problemMatcher": []
+            "problemMatcher": [
+                {
+                    "pattern": [
+                        {
+                            "regexp": ".",
+                            "file": 1,
+                            "location": 2,
+                            "message": 3
+                        }
+                    ],
+                    "background": {
+                        "activeOnStart": true,
+                        "beginsPattern": ".",
+                        "endsPattern": ".",
+                    }
+                }
+            ]
         },
         {
             "label": "jmavsim kill",
@@ -100,8 +116,7 @@
                 "showReuseMessage": false,
                 "clear": false
             },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
+            "problemMatcher": []
         },
         {
             "label": "gazebo build",
@@ -128,11 +143,11 @@
                 "cwd": "${workspaceFolder}",
                 "env": {
                     "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/${input:gazeboWorld}.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/sitl_gazebo/worlds/${input:gazeboWorld}.world",
             "isBackground": true,
             "presentation": {
                 "echo": true,
@@ -168,11 +183,11 @@
                 "cwd": "${workspaceFolder}",
                 "env": {
                     "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/${input:gazeboModel}/${input:gazeboModel}.sdf --model-name=${input:gazeboModel} -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/sitl_gazebo/models/${input:vehicleModel}/${input:vehicleModel}.sdf --model-name=${input:vehicleModel} -x 1.01 -y 0.98 -z 0.83",
             "isBackground": false,
             "presentation": {
                 "echo": true,
@@ -201,26 +216,26 @@
             ]
         },
         {
-            "label": "ign gazebo",
+            "label": "gazebo client",
             "type": "shell",
+            "dependsOn": "gazebo build",
             "options": {
                 "cwd": "${workspaceFolder}",
                 "env": {
-                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/ignition/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
                     "PX4_SIM_SPEED_FACTOR": "1"
                 }
             },
-            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/ignition/worlds/${input:ignWorld}.sdf",
+            "command": "gzclient --verbose",
             "isBackground": true,
             "presentation": {
                 "echo": true,
                 "reveal": "never",
-                "revealProblems": "onProblem",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [
                 {
@@ -243,51 +258,29 @@
         {
             "label": "gazebo kill",
             "type": "shell",
-            "command": "pkill -9 -f gzserver || true",
+            "command": "killall gzserver",
             "presentation": {
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [],
             "dependsOn":["px4_sitl_cleanup"]
         },
-        {
-            "label": "ign gazebo kill",
-            "type": "shell",
-            "command": "pkill -9 -f ign || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
-        },
-
         {
             "label": "px4_sitl_cleanup",
             "type": "shell",
-            "command": "rm -rfv /tmp/px4* || true",
+            "command": "rm -rfv /tmp/px4*",
             "presentation": {
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": [],
             "dependsOn":["px4_kill"]
@@ -295,16 +288,14 @@
         {
             "label": "px4_kill",
             "type": "shell",
-            "command": "pkill -9 px4 || true",
+            "command": "killall px4 || true",
             "presentation": {
                 "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
+                "reveal": "silent",
                 "focus": false,
-                "panel": "dedicated",
+                "panel": "shared",
                 "showReuseMessage": false,
-                "clear": false,
-                "close": true
+                "clear": false
             },
             "problemMatcher": []
         },
@@ -346,16 +337,7 @@
     "inputs": [
         {
             "type": "pickString",
-            "id": "ignWorld",
-            "description": "Ignition world",
-            "options": [
-                "default"
-            ],
-            "default": "default"
-        },
-        {
-            "type": "pickString",
-            "id": "gazeboModel",
+            "id": "vehicleModel",
             "description": "gazebo model",
             "options": [
               "iris",

CMakeLists.txt

@@ -191,6 +191,18 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	endif()
 endif()
 
+
+option(PX4_RESTRICTED_BUILD "Enable restricted build (limit param access)" OFF)
+if(PX4_RESTRICTED_BUILD)
+	add_definitions(-DPX4_RESTRICTED_BUILD)
+	message(STATUS "Enabling restricted build")
+endif()
+
+if(PX4_EXPORT_CONTROLLED_BUILD)
+	add_definitions(-DPX4_EXPORT_CONTROLLED_BUILD)
+	message(STATUS "Enabling export controlled build (with flight time and wind restrictions)")
+endif()
+
 # external modules
 set(EXTERNAL_MODULES_LOCATION "" CACHE STRING "External modules source location")
 

CONTRIBUTING.md

@@ -8,7 +8,7 @@ First [fork and clone](https://help.github.com/articles/fork-a-repo) the project
 
 ### Create a feature branch
 
-*Always* branch off main for new features.
+*Always* branch off master for new features.
 
 ```
 git checkout -b mydescriptivebranchname
@@ -16,7 +16,7 @@ git checkout -b mydescriptivebranchname
 
 ### Edit and build the code
 
-The [developer guide](https://docs.px4.io/main/en/development/development.html) explains how to set up the development environment on Mac OS, Linux or Windows. Please take note of our [coding style](https://docs.px4.io/main/en/contribute/code.html) when editing files.
+The [developer guide](http://dev.px4.io/) explains how to set up the development environment on Mac OS, Linux or Windows. Please take note of our [coding style](https://dev.px4.io/master/en/contribute/code.html) when editing files.
 
 ### Commit your changes
 

Jenkinsfile

@@ -7,8 +7,7 @@ pipeline {
     stage('Analysis') {
       when {
         anyOf {
-          branch 'main'
-          branch 'master' // should be removed, but in case there is something going on...
+          branch 'master'
           branch 'pr-jenkins' // for testing
         }
       }
@@ -26,15 +25,15 @@ pipeline {
         //       echo $0;
         //       mkdir -p catkin_ws/src;
         //       cd catkin_ws;
-        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo
-        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/simulation/gazebo/sitl_gazebo src/mavlink_sitl_gazebo;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo
+        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/sitl_gazebo src/mavlink_sitl_gazebo;
         //       git -C ${WORKSPACE}/catkin_ws/src/Firmware fetch --tags;
         //       source /opt/ros/melodic/setup.bash;
         //       export PYTHONPATH=/opt/ros/$ROS_DISTRO/lib/python2.7/dist-packages:/usr/lib/python2.7/dist-packages:/usr/local/lib/python2.7/dist-packages;
         //       catkin init;
         //       catkin build -j$(nproc) -l$(nproc);
         //     '''
-        //     // test if the binary was correctly installed and runs using 'mavros_posix_sitl.launch'
+        //     // test if the binary was correctly installed and runs using 'mavros_posix_silt.launch'
         //     sh '''#!/bin/bash -l
         //       echo $0;
         //       source catkin_ws/devel/setup.bash;
@@ -68,7 +67,7 @@ pipeline {
               unset ROS_DISTRO;
               mkdir -p colcon_ws/src;
               cd colcon_ws;
-              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo;
               git -C ${WORKSPACE}/colcon_ws/src/Firmware fetch --tags;
               source /opt/ros/foxy/setup.sh;
               colcon build --event-handlers console_direct+ --symlink-install;
@@ -205,21 +204,20 @@ pipeline {
             unstash 'msg_documentation'
             unstash 'uorb_graph'
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
-              sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/PX4-user_guide.git')
-              sh('cp airframes.md PX4-user_guide/en/airframes/airframe_reference.md')
-              sh('cp parameters.md PX4-user_guide/en/advanced_config/parameter_reference.md')
-              sh('cp -R modules/*.md PX4-user_guide/en/modules/')
-              sh('cp -R graph_*.json PX4-user_guide/.vuepress/public/en/middleware/')
-              sh('cp -R msg_docs/*.md PX4-user_guide/en/msg_docs/')
-              sh('cd PX4-user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
-              sh('cd PX4-user_guide; git push origin main || true')
-              sh('rm -rf PX4-user_guide')
+              sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_user_guide.git')
+              sh('cp airframes.md px4_user_guide/en/airframes/airframe_reference.md')
+              sh('cp parameters.md px4_user_guide/en/advanced_config/parameter_reference.md')
+              sh('cp -R modules/*.md px4_user_guide/en/modules/')
+              sh('cp -R graph_*.json px4_user_guide/.vuepress/public/en/middleware/')
+              sh('cp -R msg_docs/*.md px4_user_guide/en/msg_docs/')
+              sh('cd px4_user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
+              sh('cd px4_user_guide; git push origin master || true')
+              sh('rm -rf px4_user_guide')
             }
           }
           when {
             anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
               branch 'pr-jenkins' // for testing
             }
           }
@@ -247,8 +245,7 @@ pipeline {
           }
           when {
             anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
               branch 'pr-jenkins' // for testing
             }
           }
@@ -281,8 +278,7 @@ pipeline {
           }
           when {
             anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
               branch 'pr-jenkins' // for testing
             }
           }
@@ -311,8 +307,7 @@ pipeline {
           }
           when {
             anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
               branch 'pr-jenkins' // for testing
             }
           }
@@ -355,8 +350,7 @@ pipeline {
           }
           when {
             anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
               branch 'pr-jenkins' // for testing
             }
           }
@@ -379,8 +373,7 @@ pipeline {
           }
           when {
             anyOf {
-              branch 'main'
-              branch 'master' // should be removed, but in case there is something going on...
+              branch 'master'
               branch 'pr-jenkins' // for testing
             }
           }

Makefile

@@ -129,6 +129,22 @@ else
 	BUILD_DIR_SUFFIX :=
 endif
 
+ifdef PX4_RESTRICTED_BUILD
+	CMAKE_ARGS += -DPX4_RESTRICTED_BUILD=ON
+	BUILD_DIR_SUFFIX := $(BUILD_DIR_SUFFIX)_restricted
+endif
+
+# pass the PX4_EXPORT_CONTROLLED_BUILD on to CMAKE_ARGS, and set it to 0 (OFF) by default
+PX4_EXPORT_CONTROLLED_BUILD ?= 0
+ifeq ($(PX4_EXPORT_CONTROLLED_BUILD),1)
+	CMAKE_ARGS += -DPX4_EXPORT_CONTROLLED_BUILD=ON
+	BUILD_DIR_SUFFIX := $(BUILD_DIR_SUFFIX)_export_controlled
+else ifeq ($(PX4_EXPORT_CONTROLLED_BUILD),0)
+	CMAKE_ARGS += -DPX4_EXPORT_CONTROLLED_BUILD=OFF
+else
+        $(error ERROR: Invalid value of flag PX4_EXPORT_CONTROLLED_BUILD, has to be '0' or '1')
+endif
+
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
 	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
@@ -245,6 +261,12 @@ define deprecation_warning
 	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
 endef
 
+skynode:
+	$(MAKE) px4_fmu-v5x $(ARGS)
+
+skynode_rtps:
+	$(MAKE) px4_fmu-v5x_rtps $(ARGS)
+
 # All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
 .PHONY: all px4_sitl_default all_config_targets all_default_targets
 

README.md

@@ -6,38 +6,38 @@
 
 [![Slack](/.github/slack.svg)](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)
 
-This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
+This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
 
 PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box.
 
-* Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/main/LICENSE))
-* [Supported airframes](https://docs.px4.io/main/en/airframes/airframe_reference.html) ([portfolio](https://px4.io/ecosystem/commercial-systems/)):
-  * [Multicopters](https://docs.px4.io/main/en/frames_multicopter/)
-  * [Fixed wing](https://docs.px4.io/main/en/frames_plane/)
-  * [VTOL](https://docs.px4.io/main/en/frames_vtol/)
-  * [Autogyro](https://docs.px4.io/main/en/frames_autogyro/)
-  * [Rover](https://docs.px4.io/main/en/frames_rover/)
+* Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/master/LICENSE))
+* [Supported airframes](https://docs.px4.io/master/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):
+  * [Multicopters](https://docs.px4.io/master/en/frames_multicopter/)
+  * [Fixed wing](https://docs.px4.io/master/en/frames_plane/)
+  * [VTOL](https://docs.px4.io/master/en/frames_vtol/)
+  * [Autogyro](https://docs.px4.io/master/en/frames_autogyro/)
+  * [Rover](https://docs.px4.io/master/en/frames_rover/)
   * many more experimental types (Blimps, Boats, Submarines, High altitude balloons, etc)
 * Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)
 
 
 ## Building a PX4 based drone, rover, boat or robot
 
-The [PX4 User Guide](https://docs.px4.io/main/en/) explains how to assemble [supported vehicles](https://docs.px4.io/main/en/airframes/airframe_reference.html) and fly drones with PX4.
-See the [forum and chat](https://docs.px4.io/main/en/#getting-help) if you need help!
+The [PX4 User Guide](https://docs.px4.io/master/en/) explains how to assemble [supported vehicles](https://docs.px4.io/master/en/airframes/airframe_reference.html) and fly drones with PX4.
+See the [forum and chat](https://docs.px4.io/master/en/#support) if you need help!
 
 
 ## Changing code and contributing
 
-This [Developer Guide](https://docs.px4.io/main/en/development/development.html) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.
+This [Developer Guide](https://docs.px4.io/master/en/development/development.html) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.
 
-Developers should read the [Guide for Contributions](https://docs.px4.io/main/en/contribute/).
-See the [forum and chat](https://docs.px4.io/main/en/#getting-help) if you need help!
+Developers should read the [Guide for Contributions](https://docs.px4.io/master/en/contribute/).
+See the [forum and chat](https://dev.px4.io/master/en/#support) if you need help!
 
 
 ### Weekly Dev Call
 
-The PX4 Dev Team syncs up on a [weekly dev call](https://docs.px4.io/main/en/contribute/).
+The PX4 Dev Team syncs up on a [weekly dev call](https://dev.px4.io/master/en/contribute/#dev_call).
 
 > **Note** The dev call is open to all interested developers (not just the core dev team). This is a great opportunity to meet the team and contribute to the ongoing development of the platform. It includes a QA session for newcomers. All regular calls are listed in the [Dronecode calendar](https://www.dronecode.org/calendar/).
 
@@ -88,43 +88,35 @@ This repository contains code supporting Pixhawk standard boards (best supported
   * FMUv6X and FMUv6U (STM32H7, 2021)
     * Various vendors will provide FMUv6X and FMUv6U based designs Q3/2021
   * FMUv5 and FMUv5X (STM32F7, 2019/20)
-    * [Pixhawk 4 (FMUv5)](https://docs.px4.io/main/en/flight_controller/pixhawk4.html)
-    * [Pixhawk 4 mini (FMUv5)](https://docs.px4.io/main/en/flight_controller/pixhawk4_mini.html)
-    * [CUAV V5+ (FMUv5)](https://docs.px4.io/main/en/flight_controller/cuav_v5_plus.html)
-    * [CUAV V5 nano (FMUv5)](https://docs.px4.io/main/en/flight_controller/cuav_v5_nano.html)
-    * [Auterion Skynode (FMUv5X)](https://docs.auterion.com/skynode)
+    * [Pixhawk 4 (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
+    * [Pixhawk 4 mini (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
+    * [CUAV V5+ (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
+    * [CUAV V5 nano (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
+    * [Auterion Skynode (FMUv5X)](https://docs.px4.io/master/en/flight_controller/auterion_skynode.html)
   * FMUv4 (STM32F4, 2015)
-    * [Pixracer](https://docs.px4.io/main/en/flight_controller/pixracer.html)
-    * [Pixhawk 3 Pro](https://docs.px4.io/main/en/flight_controller/pixhawk3_pro.html)
+    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
+    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
   * FMUv3 (STM32F4, 2014)
-    * [Pixhawk 2](https://docs.px4.io/main/en/flight_controller/pixhawk-2.html)
-    * [Pixhawk Mini](https://docs.px4.io/main/en/flight_controller/pixhawk_mini.html)
-    * [CUAV Pixhack v3](https://docs.px4.io/main/en/flight_controller/pixhack_v3.html)
+    * [Pixhawk 2](https://docs.px4.io/master/en/flight_controller/pixhawk-2.html)
+    * [Pixhawk Mini](https://docs.px4.io/master/en/flight_controller/pixhawk_mini.html)
+    * [CUAV Pixhack v3](https://docs.px4.io/master/en/flight_controller/pixhack_v3.html)
   * FMUv2 (STM32F4, 2013)
-    * [Pixhawk](https://docs.px4.io/main/en/flight_controller/pixhawk.html)
-    * [Pixfalcon](https://docs.px4.io/main/en/flight_controller/pixfalcon.html)
+    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
+    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)
 
 ### Manufacturer and Community supported
-  * [Holybro Durandal](https://docs.px4.io/main/en/flight_controller/durandal.html)
-  * [Hex Cube Orange](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orange.html)
-  * [Hex Cube Yellow](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_yellow.html)
+  * [Holybro Durandal](https://docs.px4.io/master/en/flight_controller/durandal.html)
+  * [Hex Cube Orange](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_orange.html)
+  * [Hex Cube Yellow](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_yellow.html)
   * [Airmind MindPX V2.8](http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf)
   * [Airmind MindRacer V1.2](http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf)
-  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/main/en/complete_vehicles/crazyflie2.html)
-  * [Omnibus F4 SD](https://docs.px4.io/main/en/flight_controller/omnibus_f4_sd.html)
-  * [Holybro Kakute F7](https://docs.px4.io/main/en/flight_controller/kakutef7.html)
-  * [Raspberry PI with Navio 2](https://docs.px4.io/main/en/flight_controller/raspberry_pi_navio2.html)
+  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/complete_vehicles/crazyflie2.html)
+  * [Omnibus F4 SD](https://docs.px4.io/master/en/flight_controller/omnibus_f4_sd.html)
+  * [Holybro Kakute F7](https://docs.px4.io/master/en/flight_controller/kakutef7.html)
+  * [Raspberry PI with Navio 2](https://docs.px4.io/master/en/flight_controller/raspberry_pi_navio2.html)
 
-Additional information about supported hardware can be found in [PX4 user Guide > Autopilot Hardware](https://docs.px4.io/main/en/flight_controller/).
+Additional information about supported hardware can be found in [PX4 user Guide > Autopilot Hardware](https://docs.px4.io/master/en/flight_controller/).
 
 ## Project Roadmap
 
 A high level project roadmap is available [here](https://github.com/orgs/PX4/projects/25).
-
-## Project Governance
-
-The PX4 Autopilot project including all of its trademarks is hosted under [Dronecode](https://www.dronecode.org/), part of the Linux Foundation.
-
-<a href="https://www.dronecode.org/" style="padding:20px" ><img src="https://mavlink.io/assets/site/logo_dronecode.png" alt="Dronecode Logo" width="110px"/></a>
-<a href="https://www.linuxfoundation.org/projects" style="padding:20px;"><img src="https://mavlink.io/assets/site/logo_linux_foundation.png" alt="Linux Foundation Logo" width="80px" /></a>
-<div style="padding:10px">&nbsp;</div>

ROMFS/CMakeLists.txt

@@ -112,17 +112,23 @@ add_custom_command(
 		${PX4_SOURCE_DIR}/Tools/px4airframes/xmlout.py
 		${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
 	)
+set(romfs_extract_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_extract.stamp)
+add_custom_command(
+	OUTPUT ${romfs_extract_stamp}
+	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
+	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
+	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
+	WORKING_DIRECTORY ${romfs_gen_root_dir}
+	DEPENDS ${romfs_tar_file}
+	VERBATIM
+	)
 
-
-set(romfs_copy_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_copy.stamp)
 add_custom_command(
 	OUTPUT
 		${romfs_gen_root_dir}/init.d/rc.serial
 		${romfs_gen_root_dir}/init.d/rc.autostart
 		${romfs_gen_root_dir}/init.d/rc.autostart.post
-		${romfs_copy_stamp}
-	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
-	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
+		romfs_copy.stamp
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
 		--airframes-path ${romfs_gen_root_dir}/init.d
 		--start-script ${romfs_gen_root_dir}/init.d/rc.autostart
@@ -131,9 +137,9 @@ add_custom_command(
 		--rc-dir ${romfs_gen_root_dir}/init.d
 		--serial-ports ${board_serial_ports} ${added_arguments}
 		--config-files ${module_config_files} #--verbose
-	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_copy_stamp}
-	WORKING_DIRECTORY ${romfs_gen_root_dir}
-	DEPENDS ${romfs_tar_file}
+	COMMAND ${CMAKE_COMMAND} -E touch romfs_copy.stamp
+	DEPENDS
+		${romfs_extract_stamp}
 	COMMENT "ROMFS: copying, generating airframes"
 	)
 
@@ -305,7 +311,7 @@ add_custom_command(OUTPUT romfs_extras.stamp
 
 add_custom_target(romfs_gen_files_target
 	DEPENDS
-		${romfs_copy_stamp}
+		${romfs_extract_stamp}
 		${romfs_gen_root_dir}/init.d/rc.serial
 		romfs_extras.stamp
 	)

ROMFS/cannode/init.d/rcS

@@ -86,28 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial
 
 # Check for flow sensor
-if param compare -s SENS_EN_PX4FLOW 1
+if param compare SENS_EN_PX4FLOW 1
 then
 	px4flow start -X &
 fi
 
-if param compare -s IMU_GYRO_CAL_EN 1
-then
-	gyro_calibration start
-fi
-
-
-if param compare -s MBE_ENABLE 1
-then
-	# conservative mag bias estimation
-	param set-default MBE_LEARN_GAIN 5
-	param set-default IMU_GYRO_CUTOFF 20
-	mag_bias_estimator start
-fi
-
-param set-default SENS_MAG_RATE 100
-
-sensors start
-
 uavcannode start
 unset R

ROMFS/px4fmu_common/CMakeLists.txt

@@ -35,5 +35,6 @@ add_subdirectory(init.d)
 add_subdirectory(mixers)
 # TODO: make this configurable from the board config, or better combine
 if("${PX4_BOARD}" MATCHES "sitl")
+	add_subdirectory(mixers-sitl)
 	add_subdirectory(init.d-posix)
 endif()

ROMFS/px4fmu_common/init.d-posix/airframes/10016_iris

@@ -9,25 +9,4 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
+set MIXER quad_w

ROMFS/px4fmu_common/init.d-posix/airframes/10017_iris_ctrlalloc

@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL
+#
+# @type Quadrotor Wide
+#
+# @maintainer Julian Oes <julian@oes.ch>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+set MIXER skip
+set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/10019_omnicopter

@@ -9,6 +9,8 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+param set-default SYS_CTRL_ALLOC 1
+
 
 param set-default CA_AIRFRAME 0
 
@@ -95,3 +97,5 @@ param set-default CA_METHOD 0
 param set-default FD_FAIL_P 0
 param set-default FD_FAIL_R 0
 
+set MIXER skip
+set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/10020_if750a

@@ -0,0 +1,19 @@
+#!/bin/sh
+#
+# @name IF750A SITL
+# InspiredFlight 750 Auterion edition. Gazebo Only.
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# EKF2: Multi GPS blending (as the model has 2 GPS's)
+param set-default SENS_GPS_MASK 7
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_DO_STAB 2
+
+set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/10020_if750a.post

@@ -0,0 +1,10 @@
+
+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
+
+# shellcheck disable=SC2154
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
+# shellcheck disable=SC2154
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/10028_quadrotor_x

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Quadrotor SITL model for JSBSim
+#
+# @type Quadrotor Wide
+#
+# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+set MIXER quad_w

ROMFS/px4fmu_common/init.d-posix/airframes/10029_hexarotor_x

@@ -0,0 +1,30 @@
+#!/bin/sh
+#
+# @name Hexacopter SITL model for JSBSim
+#
+# @type Hexarotor x
+#
+# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCH_P 6.0
+param set-default MC_ROLLRATE_P 0.15
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLL_P 6.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
+
+param set-default RTL_DESCEND_ALT 10
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_DO_STAB 2
+
+param set-default MAV_TYPE 13
+
+set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/10030_px4vision

@@ -8,8 +8,4 @@
 
 . ${R}etc/init.d/airframes/4016_holybro_px4vision
 
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
+set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/10040_quadx

@@ -9,8 +9,7 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadx}
+set MIXER quad_x
 
 # disable some checks to allow to fly:
 # - with usb
@@ -21,24 +20,4 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
 param set SIH_VEHICLE_TYPE 0
-

ROMFS/px4fmu_common/init.d-posix/airframes/10041_airplane

@@ -8,8 +8,7 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=airplane}
+set MIXER AERT
 
 # disable some checks to allow to fly:
 # - with usb
@@ -22,30 +21,13 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default BAT_N_CELLS 3
 
-param set-default SIH_T_MAX 6.0
-param set-default SIH_MASS 0.3
-param set-default SIH_IXX 0.00402
-param set-default SIH_IYY 0.0144
-param set-default SIH_IZZ 0.0177
-param set-default SIH_IXZ 0.00046
-param set-default SIH_KDV 0.2
+param set SIH_T_MAX 6.0
+param set SIH_MASS 0.3
+param set SIH_IXX 0.00402
+param set SIH_IYY 0.0144
+param set SIH_IZZ 0.0177
+param set SIH_IXZ 0.00046
+param set SIH_KDV 0.2
 
-param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
-
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 202
-param set-default PWM_MAIN_FUNC5 203
-param set-default PWM_MAIN_FUNC6 101
+param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

ROMFS/px4fmu_common/init.d-posix/airframes/10042_xvert

@@ -8,9 +8,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 0
 param set-default VT_FW_DIFTHR_EN 1
@@ -19,6 +16,8 @@ param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5
 
 param set-default MAV_TYPE 19
+set MAV_TYPE 19
+set MIXER vtol_tailsitter_duo_sat
 
 # disable some checks to allow to fly:
 # - with usb
@@ -31,39 +30,16 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default BAT_N_CELLS 3
 
-param set-default SIH_T_MAX 2.0
-param set-default SIH_Q_MAX 0.0165
-param set-default SIH_MASS 0.2
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
 # IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set-default SIH_IXX 0.00354
-param set-default SIH_IYY 0.000625
-param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0.0
-param set-default SIH_KDV 0.2
-param set-default SIH_L_ROLL 0.145
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0.0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.145
 
 # sih as tailsitter
-param set-default SIH_VEHICLE_TYPE 2
-
-param set-default CA_AIRFRAME 4
-
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR1_KM 0.05
-
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y 0.5
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC5 201
-param set-default PWM_MAIN_FUNC6 202
+param set SIH_VEHICLE_TYPE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -9,7 +9,6 @@
 
 # EKF2
 param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
 param set-default EKF2_EVP_NOISE 0.05
 param set-default EKF2_EVA_NOISE 0.05
 
@@ -19,7 +18,3 @@ param set-default LPE_FAKE_ORIGIN 1
 
 param set-default MPC_ALT_MODE 2
 
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1013_iris_vision

@@ -10,7 +10,6 @@
 # EKF2: Vision position and heading
 param set-default EKF2_AID_MASK 24
 param set-default EKF2_EV_DELAY 5
-param set-default EKF2_GPS_CTRL 0
 
 # LPE: Vision + baro
 param set-default LPE_FUSION 132

ROMFS/px4fmu_common/init.d-posix/airframes/1014_solo

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# @name Solo
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.05
+
+set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -9,7 +9,7 @@
 
 # EKF2
 param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
+param set-default SENS_FLOW_ROT 0
 
 # LPE: Flow-only mode
 param set-default LPE_FUSION 242

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -10,4 +10,3 @@
 # EKF2: Vision velocity and heading
 param set-default EKF2_AID_MASK 272
 param set-default EKF2_EV_DELAY 5
-param set-default EKF2_GPS_CTRL 0

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name UUV
+#
+
+. ${R}etc/init.d/rc.uuv_defaults
+
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
+
+set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -8,40 +8,5 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
-param set-default CA_AIRFRAME 7
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY 0.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.0000
-param set-default CA_ROTOR0_PY -0.3000
-param set-default CA_ROTOR0_PZ -0.3000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 0.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.0000
-param set-default CA_ROTOR1_PY 0.3000
-param set-default CA_ROTOR1_PZ -0.3000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 0.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX 0.0000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.3000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY 0.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX 0.0000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.3000
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
+set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -8,6 +8,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 7
 
 param set-default CA_ROTOR_COUNT 8
@@ -65,3 +66,4 @@ param set-default PWM_MAIN_FUNC6 106
 param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108
 
+set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/1025_iris_depth_camera

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Depth Camera)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# param set COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -14,20 +14,12 @@ param set-default FW_LND_ANG 8
 param set-default FW_L1_PERIOD 12
 
 param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
+param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MIN -15
 
-param set-default FW_RR_FF 0.5
+param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
 
 param set-default FW_SPOILERS_LND 0.4
 
@@ -49,6 +41,7 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
+#param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 1
 
 param set-default CA_ROTOR_COUNT 1
@@ -75,3 +68,5 @@ param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
 
 
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -39,28 +39,6 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
 
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -39,28 +39,5 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -35,28 +35,5 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -37,28 +37,5 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1037_believer

@@ -44,28 +44,5 @@ param set-default FW_USE_NPFG 1
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1039_advanced_plane

@@ -1,75 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -12,6 +12,7 @@
 param set-default FD_ACT_EN 0
 param set-default FD_ACT_MOT_TOUT 500
 
+# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 
 param set-default CA_ROTOR_COUNT 5
@@ -61,6 +62,7 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
+param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
 
@@ -81,3 +83,5 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2
 
+set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -9,6 +9,7 @@
 
 param set-default MAV_TYPE 20
 
+# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 4
 
 param set-default CA_ROTOR_COUNT 4
@@ -58,6 +59,7 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 param set-default FW_T_TAS_TC 2
 
+param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 
 param set-default MPC_ACC_HOR_MAX 2
@@ -76,3 +78,5 @@ param set-default VT_TYPE 0
 
 param set-default WV_EN 0
 
+set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -9,6 +9,7 @@
 
 param set-default MAV_TYPE 21
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3
 
 param set-default CA_ROTOR_COUNT 4
@@ -26,7 +27,7 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR2_TILT 2
+param set-default CA_ROTOR2_TILT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -34,9 +35,9 @@ param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_TL0_CT 0
 param set-default CA_SV_TL1_CT 0
-param set-default CA_SV_TL_COUNT 2
+param set-default CA_SV_TL3_CT 0
+param set-default CA_SV_TL_COUNT 4
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -44,9 +45,11 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 204
 param set-default PWM_MAIN_FUNC6 205
-param set-default PWM_MAIN_FUNC7 201
-param set-default PWM_MAIN_FUNC8 202
-param set-default PWM_MAIN_FUNC9 203
+param set-default PWM_MAIN_FUNC7 206
+param set-default PWM_MAIN_FUNC8 207
+param set-default PWM_MAIN_FUNC9 201
+param set-default PWM_MAIN_FUNC10 202
+param set-default PWM_MAIN_FUNC11 203
 
 param set-default FW_L1_PERIOD 12
 param set-default FW_PR_FF 0.2
@@ -62,17 +65,26 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
+param set-default MC_YAW_P 1.6
+param set-default MC_AIRMODE 1
 param set-default MC_YAWRATE_P 0.3
 param set-default MC_YAWRATE_I 0.3
 
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
 param set-default MPC_XY_VEL_P_ACC 3
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
-param set-default MIS_TAKEOFF_ALT 10
+param set-default NAV_ACC_RAD 5
 
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_FWD_THRUST_SC 0.6
+param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1
+
+set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -5,14 +5,48 @@
 # @type Standard VTOL
 #
 
-. ${R}etc/init.d-posix/airframes/1040_standard_vtol
+. ${R}etc/init.d/rc.vtol_defaults
 
-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
+param set-default FW_L1_PERIOD 12
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
+
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
+
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
+param set-default NAV_ACC_RAD 5
+
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
 param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10
 
+set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop.post

@@ -0,0 +1 @@
+mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1058_standard_vtol_gimbal

@@ -0,0 +1,17 @@
+#!/bin/sh
+#
+# @name Standard VTOL with gimbal
+#
+# @type Standard VTOL with gimbal
+#
+
+. ${R}etc/init.d-posix/1040_standard_vtol
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+
+param set-default MAV_TYPE 22
+
+set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1058_standard_vtol_gimbal.post

@@ -0,0 +1,10 @@
+
+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
+
+# shellcheck disable=SC2154
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
+# shellcheck disable=SC2154
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/1059_tiltrotor_tri

@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# @name VTOL Tiltrotor Tricopter
+#
+# @type VTOL Tiltrotor Tricopter
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default FW_AIRSPD_MAX 25
+param set-default FW_AIRSPD_MIN 14
+param set-default FW_AIRSPD_TRIM 16
+param set-default FW_L1_PERIOD 12
+
+param set-default MC_ROLLRATE_P 0.3
+
+param set-default MIS_LTRMIN_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
+param set-default MIS_YAW_TMT 10
+
+param set-default MC_PITCHRATE_P 0.3
+param set-default MC_PITCH_P 5.0
+param set-default MC_ROLLRATE_P 0.4
+param set-default MC_ROLL_P 5.0
+param set-default MC_YAWRATE_P 0.8
+param set-default MC_YAW_P 1.5
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_MAN_Y_MAX 70
+param set-default MPC_THR_MIN 0.1
+param set-default MPC_TKO_SPEED 1
+param set-default MPC_XY_P 0.15
+param set-default MPC_XY_VEL_D 0.005
+param set-default MPC_XY_VEL_I 0.2
+param set-default MPC_XY_VEL_P 0.05
+param set-default MPC_Z_VEL_MAX_DN 1.5
+param set-default MPC_Z_VEL_P 0.8
+
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
+
+param set-default VT_F_TRANS_DUR 5.0
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_TILT_FW 3.1415
+param set-default VT_TILT_TRANS 1.2
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 1
+param set-default VT_B_TRANS_DUR 8
+
+param set-default MAV_TYPE 24
+
+set MIXER_FILE etc/mixers-sitl/tiltrotor_tri_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -28,6 +28,7 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 5
 
 param set-default CA_R_REV 1
@@ -36,3 +37,4 @@ param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
 
+set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -28,6 +28,7 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 6
 
 param set-default CA_R_REV 3
@@ -36,3 +37,4 @@ param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102
 
+set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -35,11 +35,4 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0
 
-param set-default CA_AIRFRAME 5
-
-param set-default CA_R_REV 1
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 201
-param set-default PWM_MAIN_FUNC6 101
-param set-default PWM_MAIN_FUNC7 101
-
+set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1063_rover_gimbal

@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# @name Rover
+#
+
+. ${R}etc/init.d/rc.rover_defaults
+
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 3
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_IDLE 0
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
+
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
+
+param set-default CBRK_AIRSPD_CHK 162128
+
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_DO_STAB 2
+
+param set-default MAV_TYPE 10
+
+set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1063_rover_gimbal.post

@@ -0,0 +1,10 @@
+
+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
+
+# shellcheck disable=SC2154
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
+# shellcheck disable=SC2154
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -28,6 +28,7 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 9
 
 param set-default CA_ROTOR_COUNT 2
@@ -46,3 +47,4 @@ param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 
+set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -44,25 +44,5 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0
 
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 0
-param set-default CA_SV_CS0_TRQ_Y 1
-param set-default CA_SV_CS0_TYPE 4
-param set-default CA_SV_CS1_TRQ_P 0
-param set-default CA_SV_CS1_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 1
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC3 202
-param set-default PWM_MAIN_FUNC4 203
-param set-default PWM_MAIN_FUNC5 407
-param set-default PWM_MAIN_FUNC6 408
-param set-default PWM_MAIN_FUNC7 409
-
+set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/17002_tf-g2

@@ -1,74 +0,0 @@
-#!/bin/sh
-#
-# @name ThunderFly TF-G2
-# ThunderFly TF-G2 autogyro airframe. Only for FlightGear simulator
-#
-# @type Autogyro
-# @class Autogyro
-#
-# @url https://github.com/ThunderFly-aerospace/TF-G2/
-#
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_STALL 5
-
-param set-default FW_P_RMAX_NEG 20.0
-param set-default FW_W_RMAX 10
-param set-default FW_W_EN 1
-
-param set-default FW_RR_P 0.08
-
-param set-default MIS_LTRMIN_ALT 50
-param set-default MIS_TAKEOFF_ALT 7
-
-param set-default NAV_ACC_RAD 20
-param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
-
-param set-default RWTO_TKOFF 0
-# Parameters related to autogyro takeoff PR
-#param set-default AG_TKOFF 1
-#param set-default AG_PROT_TYPE 1
-#param set-default AG_PROT_MIN_RPM 50.0
-#param set-default AG_PROT_TRG_RPM 900.0
-#param set-defoult AG_ROTOR_RPM 900.0
-
-param set-default FW_ARSP_SCALE_EN 0
-
-param set-default FW_AIRSPD_MAX 35
-param set-default FW_AIRSPD_MIN 7
-
-param set-default FW_P_LIM_MAX 25
-param set-default FW_P_LIM_MIN -5
-param set-default FW_R_LIM 30
-
-param set-default FW_MAN_R_MAX 30.0
-
-param set-default FW_THR_CRUISE 0.8
-param set-default FW_THR_IDLE 0
-param set-default COM_DISARM_PRFLT 0
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 0
-param set-default CA_SV_CS0_TRQ_Y 1
-param set-default CA_SV_CS0_TYPE 4
-param set-default CA_SV_CS1_TRQ_P 0
-param set-default CA_SV_CS1_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 1
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC3 202
-param set-default PWM_MAIN_FUNC4 203
-param set-default PWM_MAIN_FUNC5 407
-param set-default PWM_MAIN_FUNC6 408
-param set-default PWM_MAIN_FUNC7 409
-

ROMFS/px4fmu_common/init.d-posix/airframes/2507_cloudship

@@ -11,6 +11,7 @@
 
 . ${R}etc/init.d/rc.airship_defaults
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 9
 
 param set-default CA_ROTOR_COUNT 3
@@ -37,3 +38,4 @@ param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 103
 
+set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/3010_quadrotor_x

@@ -9,24 +9,4 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
+set MIXER quad_w

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -26,29 +26,4 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2
 
-
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.866025
-param set-default CA_ROTOR2_PY -0.5
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.866025
-param set-default CA_ROTOR3_PY 0.5
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR4_PX 0.866025
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR5_PX -0.866025
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
+set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/4001_x500

@@ -1,50 +0,0 @@
-#!/bin/sh
-#
-# @name Ignition Gazebo X3
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}
-PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0.13
-param set-default CA_ROTOR0_PY 0.22
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX -0.13
-param set-default CA_ROTOR1_PY -0.20
-param set-default CA_ROTOR1_KM  0.05
-
-param set-default CA_ROTOR2_PX 0.13
-param set-default CA_ROTOR2_PY -0.22
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -0.13
-param set-default CA_ROTOR3_PY 0.20
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default SIM_IGN_FUNC1 101
-param set-default SIM_IGN_FUNC2 102
-param set-default SIM_IGN_FUNC3 103
-param set-default SIM_IGN_FUNC4 104
-
-param set-default SIM_IGN_MIN1 150
-param set-default SIM_IGN_MIN2 150
-param set-default SIM_IGN_MIN3 150
-param set-default SIM_IGN_MIN4 150
-
-param set-default SIM_IGN_MAX1 1000
-param set-default SIM_IGN_MAX2 1000
-param set-default SIM_IGN_MAX3 1000
-param set-default SIM_IGN_MAX4 1000
-
-param set-default MPC_THR_HOVER 0.60

ROMFS/px4fmu_common/init.d-posix/airframes/6001_x4

@@ -1,80 +0,0 @@
-#!/bin/sh
-#
-# @name Ignition Gazebo X4
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x4}
-PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 6
-
-param set-default CA_ROTOR0_PX  0.25
-param set-default CA_ROTOR0_PY -0.15
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX  0.00
-param set-default CA_ROTOR1_PY -0.29
-param set-default CA_ROTOR1_KM -0.05
-
-param set-default CA_ROTOR2_PX -0.25
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM  0.05
-
-param set-default CA_ROTOR3_PX -0.25
-param set-default CA_ROTOR3_PY  0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_ROTOR4_PX  0.00
-param set-default CA_ROTOR4_PY  0.29
-param set-default CA_ROTOR4_KM  0.05
-
-param set-default CA_ROTOR5_PX  0.25
-param set-default CA_ROTOR5_PY  0.15
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default SIM_IGN_FUNC1 101
-param set-default SIM_IGN_FUNC2 102
-param set-default SIM_IGN_FUNC3 103
-param set-default SIM_IGN_FUNC4 104
-param set-default SIM_IGN_FUNC5 105
-param set-default SIM_IGN_FUNC6 106
-
-param set-default SIM_IGN_MIN1 150
-param set-default SIM_IGN_MIN2 150
-param set-default SIM_IGN_MIN3 150
-param set-default SIM_IGN_MIN4 150
-param set-default SIM_IGN_MIN5 150
-param set-default SIM_IGN_MIN6 150
-
-param set-default SIM_IGN_MAX1 1000
-param set-default SIM_IGN_MAX2 1000
-param set-default SIM_IGN_MAX3 1000
-param set-default SIM_IGN_MAX4 1000
-param set-default SIM_IGN_MAX5 1000
-param set-default SIM_IGN_MAX6 1000
-
-
-param set-default MC_PITCHRATE_D 0.0016
-param set-default MC_PITCHRATE_I 0.2500
-param set-default MC_PITCHRATE_P 0.1831
-param set-default MC_PITCH_P 5.216
-
-param set-default MC_ROLLRATE_D 0.0022
-param set-default MC_ROLLRATE_I 0.2095
-param set-default MC_ROLLRATE_P 0.1570
-param set-default MC_ROLL_P 6.081
-
-param set-default MC_YAWRATE_D 0.0009
-param set-default MC_YAWRATE_I 0.1800
-param set-default MC_YAWRATE_P 0.1773
-param set-default MC_YAW_P 5.386490
-
-param set-default MPC_THR_HOVER 0.61

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480

@@ -28,39 +28,4 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2
 
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 6
-
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.866025
-param set-default CA_ROTOR2_PY -0.5
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.866025
-param set-default CA_ROTOR3_PY 0.5
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR4_PX 0.866025
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR5_PX -0.866025
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-# Gimbal
-param set-default PWM_MAIN_FUNC7 420
-param set-default PWM_MAIN_FUNC8 421
-param set-default PWM_MAIN_FUNC9 422
-# Landing gear
-param set-default PWM_MAIN_FUNC10 400
-param set-default PWM_MAIN_FUNC11 400
-
+set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480.post

@@ -1,4 +1,6 @@
 
+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
 
 # shellcheck disable=SC2154

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc

@@ -0,0 +1,70 @@
+#!/bin/sh
+#
+# @name Typhoon H480 SITL
+#
+# @type Hexarotor x
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MAV_TYPE 13
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+
+param set-default RTL_DESCEND_ALT 10
+param set-default RTL_LAND_DELAY 0
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+param set-default MAV_PROTO_VER 2
+
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 6
+
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.866025
+param set-default CA_ROTOR2_PY -0.5
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.866025
+param set-default CA_ROTOR3_PY 0.5
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR4_PX 0.866025
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR5_PX -0.866025
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+
+set MIXER skip
+set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc.post

@@ -0,0 +1,8 @@
+
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
+
+# shellcheck disable=SC2154
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
+# shellcheck disable=SC2154
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
+mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -33,8 +33,13 @@
 
 px4_add_romfs_files(
 	10016_iris
+	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
 	10019_omnicopter
+	10020_if750a
+	10020_if750a.post
+	10028_quadrotor_x
+	10029_hexarotor_x
 	10030_px4vision
 	10040_quadx
 	10041_airplane
@@ -45,42 +50,46 @@ px4_add_romfs_files(
 	1012_iris_rplidar
 	1013_iris_vision
 	1013_iris_vision.post
+	1014_solo
 	1015_iris_obs_avoid
 	1015_iris_obs_avoid.post
 	1017_iris_opt_flow_mockup
 	1018_iris_vision_velocity
 	1019_iris_dual_gps
+	1020_uuv_generic
 	1021_uuv_hippocampus
 	1022_uuv_bluerov2_heavy
+	1025_iris_depth_camera
 	1030_plane
 	1031_plane_cam
 	1032_plane_catapult
+	1033_plane_lidar
 	1033_rascal
 	1034_rascal-electric
 	1035_techpod
 	1036_malolo
 	1037_believer
 	1038_glider
-	1039_advanced_plane
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor
 	1043_standard_vtol_drop
-	1044_plane_lidar
+	1043_standard_vtol_drop.post
+	1058_standard_vtol_gimbal
+	1058_standard_vtol_gimbal.post
+	1059_tiltrotor_tri
 	1060_rover
 	1061_r1_rover
 	1062_tf-r1
+	1063_rover_gimbal
+	1063_rover_gimbal.post
 	1070_boat
 	3010_quadrotor_x
 	3011_hexarotor_x
-
-	4001_x500
-
 	17001_tf-g1
-	17002_tf-g2
 	2507_cloudship
-
-	6001_x4
 	6011_typhoon_h480
 	6011_typhoon_h480.post
+	6012_typhoon_h480_ctrlalloc
+	6012_typhoon_h480_ctrlalloc.post
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -24,6 +24,7 @@ mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local
 
 # API/Offboard link
 mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
+mavlink stream -r 2 -s COMMAND_CANCEL -u $udp_offboard_port_local
 
 # Onboard link to camera
 mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
@@ -32,7 +33,7 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
 
 # To display for SIH sitl
-if [ "$PX4_SIMULATOR" = "sihsim" ]; then
+if [ "$SIM_MODE" = "sihsim" ]; then
 	udp_sihsim_port_local=$((19450+px4_instance))
 	udp_sihsim_port_remote=$((19410+px4_instance))
 	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -1,68 +1,20 @@
 #!/bin/sh
 # shellcheck disable=SC2154
 
-# Simulator IMU data provided at 250 Hz
-param set-default IMU_INTEG_RATE 250
-
-if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
-
-	if ! simulator_sih start; then
-		echo "ERROR  [init] simulator_sih failed to start"
-		exit 1
-	fi
-
-elif [ "$PX4_SIMULATOR" = "ignition" ]; then
-
-	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f gazebo_env.sh ]; then
-		. ./gazebo_env.sh
-	elif [ -f ../gazebo_env.sh ]; then
-		. ../gazebo_env.sh
-	fi
-
-	if ! ign service --info --service /world/${PX4_SIM_WORLD}/create | grep "ignition.msgs.EntityFactory"; then
-		# starting ign gazebo with ${PX4_SIM_WORLD} world
-		echo "INFO  [init] starting ign gazebo"
-
-		if [ -z $HEADLESS ]; then
-			ign gazebo --verbose=1 -r "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
-		else
-			# starting ign gazebo headless
-			ign gazebo --verbose=1 -r -s "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
-		fi
-	else
-		echo "INFO  [init] ign gazebo already running"
-	fi
-
-	if simulator_ignition_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_SIM_WORLD}"; then
-		sensor_baro_sim start
-		sensor_gps_sim start
-		sensor_mag_sim start
-	else
-		echo "ERROR  [init] ign gazebo failed to start"
-		exit 1
-	fi
+simulator_tcp_port=$((4560+px4_instance))
 
+# Check if PX4_SIM_HOSTNAME environment variable is empty
+# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+# If both are empty use localhost for simulator
+if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+  if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+    echo "PX4 SIM HOST: localhost"
+    simulator start -c $simulator_tcp_port
+  else
+    echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+    simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+  fi
 else
-	# otherwise start simulator (mavlink) module
-	simulator_tcp_port=$((4560+px4_instance))
-
-	# Check if PX4_SIM_HOSTNAME environment variable is empty
-	# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
-	# If both are empty use localhost for simulator
-	if [ -z "${PX4_SIM_HOSTNAME}" ]; then
-
-		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "PX4 SIM HOST: localhost"
-			simulator_mavlink start -c $simulator_tcp_port
-		else
-			echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
-			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
-		fi
-
-	else
-		echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
-		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
-	fi
-
+  echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+  simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
 fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -24,7 +24,7 @@ fi
 
 # initialize script variables
 set IO_PRESENT                  no
-set MIXER                       skip
+set MIXER                       none
 set MIXER_AUX                   none
 set MIXER_FILE                  none
 set OUTPUT_MODE                 sim
@@ -39,24 +39,10 @@ set LOGGER_BUF                  1000
 
 set RUN_MINIMAL_SHELL           no
 
-set SYS_AUTOSTART=0
-
-if [ "$PX4_SIM_MODEL" = "shell" ]
-then
+# Use the variable set by sitl_run.sh to choose the model settings.
+if [ "$PX4_SIM_MODEL" = "shell" ]; then
 	set RUN_MINIMAL_SHELL yes
-
-elif [ -n "$PX4_SYS_AUTOSTART" ]
-then
-	echo "env SYS_AUTOSTART: ${PX4_SYS_AUTOSTART}"
-	SYS_AUTOSTART=${PX4_SYS_AUTOSTART}
-
-elif [ "$PX4_SIM_MODEL" = "none" ] || [ -z $PX4_SIM_MODEL ]
-then
-	# no airframe selected
-	SYS_AUTOSTART=0
-
-elif [ -n "$PX4_SIM_MODEL" ]
-then
+else
 	# Find the matching Autostart ID (file name has the form: [0-9]+_${PX4_SIM_MODEL})
 	# TODO: unify with rc.autostart generation
 	# shellcheck disable=SC2012
@@ -65,13 +51,12 @@ then
 		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
-		SYS_AUTOSTART=$REQUESTED_AUTOSTART
 		echo "INFO  [init] found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
 	fi
 fi
 
 # Load parameters
-set PARAM_FILE parameters.bson
+set PARAM_FILE eeprom/parameters_"$REQUESTED_AUTOSTART"
 param select $PARAM_FILE
 
 if [ -f $PARAM_FILE ]
@@ -82,16 +67,26 @@ then
 	else
 		echo "[param] FAILED loading $PARAM_FILE"
 	fi
+else
+	echo "[param] parameter file not found, creating $PARAM_FILE"
 fi
 
 # exit early when the minimal shell is requested
 [ $RUN_MINIMAL_SHELL = yes ] && exit 0
 
-if param compare SYS_AUTOSTART $SYS_AUTOSTART
-then
-	set AUTOCNF no
 
-elif [ "$SYS_AUTOSTART" -eq 0 ]
+# Use environment variable PX4_ESTIMATOR to choose estimator.
+if [ "$PX4_ESTIMATOR" = "q" ]; then
+	param set SYS_MC_EST_GROUP 3
+elif [ "$PX4_ESTIMATOR" = "ekf2" ]; then
+	param set SYS_MC_EST_GROUP 2
+elif [ "$PX4_ESTIMATOR" = "lpe" ]; then
+	param set SYS_MC_EST_GROUP 1
+elif [ "$PX4_ESTIMATOR" = "inav" ]; then
+	param set SYS_MC_EST_GROUP 0
+fi
+
+if param compare SYS_AUTOSTART $REQUESTED_AUTOSTART
 then
 	set AUTOCNF no
 else
@@ -109,10 +104,11 @@ fi
 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
+param set MNT_MAV_SYSID $((px4_instance+1))
 
 if [ $AUTOCNF = yes ]
 then
-	param set SYS_AUTOSTART $SYS_AUTOSTART
+	param set SYS_AUTOSTART $REQUESTED_AUTOSTART
 
 	param set CAL_ACC0_ID  1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO0_ID 1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
@@ -149,7 +145,6 @@ param set-default EKF2_MULTI_MAG 2
 param set-default SENS_MAG_MODE 0
 
 param set-default IMU_GYRO_FFT_EN 1
-param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets
 
 param set-default -s MC_AT_EN 1
 
@@ -197,28 +192,28 @@ do
 			;;
 	esac
 done
-
-if [ -e "$autostart_file" ]
-then
-	. "$autostart_file"
-
-elif [ ! -e "$autostart_file" ] && [ "$SYS_AUTOSTART" -ne "0" ]
-then
+if [ ! -e "$autostart_file" ]; then
 	echo "Error: no autostart file found ($autostart_file)"
 	exit 1
 fi
 
+. "$autostart_file"
+
+# Simulator IMU data provided at 250 Hz
+param set IMU_INTEG_RATE 250
+
 #user defined params for instances can be in PATH
 . px4-rc.params
 
 dataman start
-
+# start sih in sih_sim mode, otherwise simulator module
+if [ "$SIM_MODE" = "sihsim" ]; then
+	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-if ! replay tryapplyparams
+elif ! replay tryapplyparams
 then
-	. px4-rc.simulator
+  . px4-rc.simulator
 fi
-
 load_mon start
 battery_simulator start
 tone_alarm start
@@ -262,6 +257,12 @@ then
 	gyro_calibration start
 fi
 
+# Payload deliverer module if gripper is enabled
+if param compare -s PD_GRIPPER_EN 1
+then
+	payload_deliverer start
+fi
+
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink
 

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -39,8 +39,10 @@ px4_add_romfs_files(
 	rc.balloon_apps
 	rc.balloon_defaults
 	rc.boat_defaults
+	rc.autostart_ext
 	rc.fw_apps
 	rc.fw_defaults
+	rc.heli_defaults
 	rc.interface
 	rc.logging
 	rc.mc_apps

ROMFS/px4fmu_common/init.d/airframes/1000_rc_fw_easystar.hil

@@ -0,0 +1,72 @@
+#!/bin/sh
+#
+# @name HILStar (XPlane)
+#
+# @type Simulation
+# @class Plane
+#
+# @output MAIN1 aileron
+# @output MAIN2 elevator
+# @output MAIN3 rudder
+# @output MAIN4 throttle
+# @output MAIN5 flaps
+# @output MAIN6 gear
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default BAT1_N_CELLS 3
+
+param set-default FW_AIRSPD_MAX 20
+param set-default FW_AIRSPD_MIN 12
+param set-default FW_AIRSPD_TRIM 14
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_PR_FF 0.35
+param set-default FW_PR_P 0.2
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.3
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TRQ_R 0.5
+param set-default CA_SV_CS0_TYPE 2
+param set-default CA_SV_CS1_TRQ_P 1.0
+param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS2_TRQ_Y 1.0
+param set-default CA_SV_CS2_TYPE 4
+param set-default CA_SV_CS3_TYPE 10
+
+param set-default HIL_ACT_REV 2
+param set-default HIL_ACT_FUNC1 201
+param set-default HIL_ACT_FUNC2 202
+param set-default HIL_ACT_FUNC3 203
+param set-default HIL_ACT_FUNC4 101
+param set-default HIL_ACT_FUNC5 204
+param set-default HIL_ACT_FUNC6 400
+
+param set SYS_HITL 1
+
+param set UAVCAN_ENABLE 0
+
+# disable some checks to allow to fly
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+set MIXER AERT

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -11,6 +11,7 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+set MIXER quad_x
 
 param set SYS_HITL 1
 

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -76,8 +76,6 @@ param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS2_TRQ_P 1.0
@@ -108,4 +106,6 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default MAV_TYPE 22
 
+set MIXER standard_vtol_hitl
 
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/11001_hexa_cox

@@ -5,12 +5,16 @@
 # @type Hexarotor Coaxial
 # @class Copter
 #
-# @output Motor1 front right top, CW; angle:60; direction:CW
-# @output Motor2 front right bottom, CCW; angle:60; direction:CCW
-# @output Motor3 back top, CW; angle:180; direction:CW
-# @output Motor4 back bottom, CCW; angle:180; direction:CCW
-# @output Motor5 front left top, CW; angle:-60; direction:CW
-# @output Motor6 front left bottom, CCW;angle:-60; direction:CCW
+# @output MAIN1 front right top, CW; angle:60; direction:CW
+# @output MAIN2 front right bottom, CCW; angle:60; direction:CCW
+# @output MAIN3 back top, CW; angle:180; direction:CW
+# @output MAIN4 back bottom, CCW; angle:180; direction:CCW
+# @output MAIN5 front left top, CW; angle:-60; direction:CW
+# @output MAIN6 front left bottom, CCW;angle:-60; direction:CCW
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
@@ -20,28 +24,7 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-param set-default MAV_TYPE 13
-
-param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.25
-param set-default CA_ROTOR0_PY 0.433
-param set-default CA_ROTOR0_PZ -0.05
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.25
-param set-default CA_ROTOR1_PY 0.433
-param set-default CA_ROTOR1_PZ 0.05
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0
-param set-default CA_ROTOR2_PZ -0.05
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY 0
-param set-default CA_ROTOR3_PZ 0.05
-param set-default CA_ROTOR4_PX 0.25
-param set-default CA_ROTOR4_PY -0.433
-param set-default CA_ROTOR4_PZ -0.05
-param set-default CA_ROTOR4_KM -0.05
-param set-default CA_ROTOR5_PX 0.25
-param set-default CA_ROTOR5_PY -0.433
-param set-default CA_ROTOR5_PZ 0.05
+set MIXER hexa_cox
 
+# Need to set all 8 channels
+set PWM_OUT 12345678

ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil

@@ -12,6 +12,8 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+set MIXER quad_x
+set PWM_OUT 1234
 
 param set UAVCAN_ENABLE 0
 

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -12,6 +12,8 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
+set MIXER AERT
+set PWM_OUT 1234
 
 param set UAVCAN_ENABLE 0
 

ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil

@@ -5,10 +5,10 @@
 # @type Simulation
 # @class VTOL
 #
-# @output Motor1 motor right
-# @output Motor2 motor left
-# @output Servo1 elevon right
-# @output Servo2 elevon left
+# @output MAIN1 motor right
+# @output MAIN2 motor left
+# @output MAIN5 elevon right
+# @output MAIN6 elevon left
 #
 # @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
 #
@@ -48,7 +48,9 @@ param set-default HIL_ACT_REV 32
 
 param set-default MAV_TYPE 19
 
+set MIXER vtol_tailsitter_duo_sat
 
+set PWM_OUT 1234
 
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

ROMFS/px4fmu_common/init.d/airframes/12001_octo_cox

@@ -5,14 +5,14 @@
 # @type Octorotor Coaxial
 # @class Copter
 #
-# @output Motor1 motor 1
-# @output Motor2 motor 2
-# @output Motor3 motor 3
-# @output Motor4 motor 4
-# @output Motor5 motor 5
-# @output Motor6 motor 6
-# @output Motor7 motor 7
-# @output Motor8 motor 8
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 motor 5
+# @output MAIN6 motor 6
+# @output MAIN7 motor 7
+# @output MAIN8 motor 8
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
@@ -21,35 +21,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+set MIXER octo_cox
 
-param set-default MAV_TYPE 14
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_ROTOR0_PX 0.35
-param set-default CA_ROTOR0_PY 0.35
-param set-default CA_ROTOR0_PZ -0.05
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PX 0.35
-param set-default CA_ROTOR1_PY -0.35
-param set-default CA_ROTOR1_PZ -0.05
-param set-default CA_ROTOR2_PX -0.35
-param set-default CA_ROTOR2_PY -0.35
-param set-default CA_ROTOR2_PZ -0.05
-param set-default CA_ROTOR3_PX -0.35
-param set-default CA_ROTOR3_PY 0.35
-param set-default CA_ROTOR3_PZ -0.05
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_PX 0.35
-param set-default CA_ROTOR4_PY -0.35
-param set-default CA_ROTOR4_PZ 0.05
-param set-default CA_ROTOR5_PX 0.35
-param set-default CA_ROTOR5_PY 0.35
-param set-default CA_ROTOR5_PZ 0.05
-param set-default CA_ROTOR5_KM -0.05
-param set-default CA_ROTOR6_PX -0.35
-param set-default CA_ROTOR6_PY 0.35
-param set-default CA_ROTOR6_PZ 0.05
-param set-default CA_ROTOR7_KM -0.05
-param set-default CA_ROTOR7_PX -0.35
-param set-default CA_ROTOR7_PY -0.35
-param set-default CA_ROTOR7_PZ 0.05
+set PWM_OUT 12345678

ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard

@@ -12,6 +12,7 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
 param set-default CA_ROTOR0_PX 1

ROMFS/px4fmu_common/init.d/airframes/13003_quad_tailsitter

@@ -0,0 +1,46 @@
+#!/bin/sh
+#
+# @name Quadrotor X Tailsitter
+#
+# @type VTOL Quad Tailsitter
+# @class VTOL
+#
+# @maintainer Roman Bapst <roman@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 20
+
+param set-default CA_AIRFRAME 4
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y 0.5
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+
+param set-default PWM_MAIN_MAX 2000
+
+param set-default VT_MOT_ID 1234
+param set-default VT_IDLE_PWM_MC  1080
+param set-default VT_TYPE 0
+
+set MIXER quad_x_vtol
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13004_quad+_tailsitter

@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# @name Quadrotor + Tailsitter
+#
+# @type VTOL Quad Tailsitter
+# @class VTOL
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 elevon left
+# @output MAIN6 elevon right
+# @output MAIN7 canard surface
+# @output MAIN8 rudder
+#
+# @maintainer Roman Bapst <roman@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 20
+
+param set-default PWM_MAIN_MAX 2000
+
+param set-default VT_IDLE_PWM_MC  1080
+param set-default VT_TYPE 0
+
+set MIXER quad_+_vtol
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13005_vtol_AAERT_quad

@@ -0,0 +1,59 @@
+#!/bin/sh
+#
+# @name Fun Cub Quad VTOL
+#
+# @type Standard VTOL
+# @class VTOL
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output AUX1 Aileron 1
+# @output AUX2 Aileron 2
+# @output AUX3 Elevator
+# @output AUX4 Rudder
+# @output AUX5 Throttle
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default PWM_AUX_DIS5 950
+
+param set-default MC_ROLL_P 6
+param set-default MC_ROLLRATE_P 0.17
+param set-default MC_ROLLRATE_I 0.002
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 6
+param set-default MC_PITCHRATE_P 0.19
+param set-default MC_PITCHRATE_I 0.002
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAWRATE_P 0.22
+param set-default MC_YAWRATE_I 0.02
+param set-default MC_YAWRATE_MAX 40
+
+param set-default MPC_YAWRAUTO_MAX 40
+
+param set-default FW_PR_I 0.02
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_I 0.01
+param set-default FW_THR_TRIM 0.75
+
+param set-default VT_ARSP_BLEND 6
+param set-default VT_ARSP_TRANS 12
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_TYPE 2
+
+set MIXER quad_x
+set MIXER_AUX vtol_AAERT
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13006_vtol_standard_delta

@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name Generic quad delta VTOL
+#
+# @type Standard VTOL
+# @class VTOL
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output AUX1 Right elevon
+# @output AUX2 Left elevon
+# @output AUX3 Motor
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+
+param set-default MC_ROLLRATE_I 0.01
+param set-default MC_PITCHRATE_I 0.01
+param set-default MC_YAW_P 3.5
+
+param set-default MC_YAWRATE_MAX 50
+
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 2
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_YAWRAUTO_MAX 20
+
+param set-default PWM_AUX_DIS3 950
+
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_TYPE 2
+
+set MIXER quad_x
+set MIXER_AUX vtol_delta
+
+set PWM_OUT 1234