mc_att_control: copy sensor_correction topic once initially

Signed-off-by: Roman <bapstroman@gmail.com>
tap_esc increase stack 1100 -> 1180 bytes
2026-05-24 00:07:34 +08:00 · 2018-11-12 21:00:28 -05:00 · 2018-10-19 20:11:14 -04:00 · 2018-10-19 20:11:14 -04:00 · 2018-10-19 20:11:14 -04:00 · 2018-10-19 20:11:14 -04:00
13924 changed files with 387433 additions and 1720872 deletions
@@ -0,0 +1 @@
+--ignore-dir=Documentation
@@ -1,117 +1,88 @@
---
-Checks:          '*,
-                  -*-avoid-c-arrays,
-                  -*-uppercase-literal-suffix,
-                  -*-magic-numbers,
-                  -altera-id-dependent-backward-branch,
-                  -altera-unroll-loops,
-                  -android*,
-                  -bugprone-integer-division,
-                  -cert-dcl50-cpp,
-                  -cert-env33-c,
-                  -cert-err34-c,
-                  -cert-err58-cpp,
-                  -cert-flp30-c,
-                  -cert-msc30-c,
-                  -cert-msc50-cpp,
-                  -clang-analyzer-core.CallAndMessage,
-                  -clang-analyzer-core.NullDereference,
-                  -clang-analyzer-core.UndefinedBinaryOperatorResult,
-                  -clang-analyzer-core.uninitialized.Assign,
-                  -clang-analyzer-core.VLASize,
-                  -clang-analyzer-cplusplus.NewDelete,
-                  -clang-analyzer-cplusplus.NewDeleteLeaks,
-                  -clang-analyzer-deadcode.DeadStores,
-                  -clang-analyzer-optin.cplusplus.VirtualCall,
-                  -clang-analyzer-optin.performance.Padding,
-                  -clang-analyzer-security.FloatLoopCounter,
-                  -clang-analyzer-security.insecureAPI.strcpy,
-                  -clang-analyzer-unix.API,
-                  -clang-analyzer-unix.cstring.BadSizeArg,
-                  -clang-analyzer-unix.Malloc,
-                  -clang-analyzer-unix.MallocSizeof,
-                  -cppcoreguidelines-c-copy-assignment-signature,
-                  -cppcoreguidelines-interfaces-global-init,
-                  -cppcoreguidelines-no-malloc,
-                  -cppcoreguidelines-owning-memory,
-                  -cppcoreguidelines-pro-bounds-array-to-pointer-decay,
-                  -cppcoreguidelines-pro-bounds-constant-array-index,
-                  -cppcoreguidelines-pro-bounds-pointer-arithmetic,
-                  -cppcoreguidelines-pro-type-const-cast,
-                  -cppcoreguidelines-pro-type-cstyle-cast,
-                  -cppcoreguidelines-pro-type-member-init,
-                  -cppcoreguidelines-pro-type-reinterpret-cast,
-                  -cppcoreguidelines-pro-type-union-access,
-                  -cppcoreguidelines-pro-type-vararg,
-                  -cppcoreguidelines-special-member-functions,
-                  -fuchsia-*,
-                  -google-build-using-namespace,
-                  -google-explicit-constructor,
-                  -google-global-names-in-headers,
-                  -google-readability-casting,
-                  -google-readability-function-size,
-                  -google-readability-namespace-comments,
-                  -google-readability-todo,
-                  -google-runtime-int,
-                  -google-runtime-references,
-                  -hicpp-deprecated-headers,
-                  -hicpp-explicit-conversions,
-                  -hicpp-function-size,
-                  -hicpp-member-init,
-                  -hicpp-no-array-decay,
-                  -hicpp-no-assembler,
-                  -hicpp-no-malloc,
-                  -hicpp-signed-bitwise,
-                  -hicpp-special-member-functions,
-                  -hicpp-use-auto,
-                  -hicpp-use-equals-default,
-                  -hicpp-use-equals-delete,
-                  -hicpp-use-override,
-                  -hicpp-vararg,
-                  -llvmlibc-*,
-                  -llvm-header-guard,
-                  -llvm-include-order,
-                  -llvm-namespace-comment,
-                  -misc-incorrect-roundings,
-                  -misc-macro-parentheses,
-                  -misc-misplaced-widening-cast,
-                  -misc-redundant-expression,
-                  -misc-unconventional-assign-operator,
-                  -misc-unused-parameters,
-                  -modernize-deprecated-headers,
-                  -modernize-loop-convert,
-                  -modernize-pass-by-value,
-                  -modernize-raw-string-literal,
-                  -modernize-return-braced-init-list,
-                  -modernize-use-auto,
-                  -modernize-use-bool-literals,
-                  -modernize-use-default-member-init,
-                  -modernize-use-equals-default,
-                  -modernize-use-equals-delete,
-                  -modernize-use-override,
-                  -modernize-use-trailing-return-type,
-                  -modernize-use-using,
-                  -modernize-use-trailing-return-type,
-                  -performance-inefficient-string-concatenation,
-                  -readability-avoid-const-params-in-decls,
-                  -readability-container-size-empty,
-                  -readability-else-after-return,
-                  -readability-function-size,
-                  -readability-implicit-bool-cast,
-                  -readability-implicit-bool-conversion,
-                  -readability-inconsistent-declaration-parameter-name,
-                  -readability-named-parameter,
-                  -readability-non-const-parameter,
-                  -readability-redundant-declaration,
-                  -readability-static-accessed-through-instance,
-                  -readability-static-definition-in-anonymous-namespace,
-                 '
+Checks:          '*
+		,-cert-dcl50-cpp
+		,-cert-err34-c
+		,-cert-err58-cpp
+		,-cert-msc30-c
+		,-cert-msc50-cpp
+		,-clang-analyzer-core.CallAndMessage
+		,-clang-analyzer-core.NullDereference
+		,-clang-analyzer-core.UndefinedBinaryOperatorResult
+		,-clang-analyzer-core.uninitialized.Assign
+		,-clang-analyzer-core.VLASize
+		,-clang-analyzer-cplusplus.NewDelete
+		,-clang-analyzer-cplusplus.NewDeleteLeaks
+		,-clang-analyzer-deadcode.DeadStores
+		,-clang-analyzer-optin.cplusplus.VirtualCall
+		,-clang-analyzer-optin.performance.Padding
+		,-clang-analyzer-security.insecureAPI.strcpy
+		,-clang-analyzer-unix.API
+		,-clang-analyzer-unix.cstring.BadSizeArg
+		,-clang-analyzer-unix.Malloc
+		,-clang-analyzer-unix.MallocSizeof
+		,-cppcoreguidelines-c-copy-assignment-signature
+		,-cppcoreguidelines-interfaces-global-init
+		,-cppcoreguidelines-no-malloc
+		,-cppcoreguidelines-pro-bounds-array-to-pointer-decay
+		,-cppcoreguidelines-pro-bounds-constant-array-index
+		,-cppcoreguidelines-pro-bounds-pointer-arithmetic
+		,-cppcoreguidelines-pro-type-const-cast
+		,-cppcoreguidelines-pro-type-cstyle-cast
+		,-cppcoreguidelines-pro-type-member-init
+		,-cppcoreguidelines-pro-type-reinterpret-cast
+		,-cppcoreguidelines-pro-type-union-access
+		,-cppcoreguidelines-pro-type-vararg
+		,-cppcoreguidelines-special-member-functions
+		,-google-build-using-namespace
+		,-google-explicit-constructor
+		,-google-global-names-in-headers
+		,-google-readability-casting
+		,-google-readability-namespace-comments
+		,-google-readability-todo
+		,-google-runtime-int
+		,-google-runtime-references
+		,-llvm-header-guard
+		,-llvm-include-order
+		,-llvm-namespace-comment
+		,-misc-incorrect-roundings
+		,-misc-macro-parentheses
+		,-misc-misplaced-widening-cast
+		,-misc-redundant-expression
+		,-misc-unconventional-assign-operator
+		,-misc-unused-parameters
+		,-modernize-deprecated-headers
+		,-modernize-loop-convert
+		,-modernize-use-auto
+		,-modernize-use-bool-literals
+		,-modernize-use-default-member-init
+		,-modernize-use-emplace
+		,-modernize-use-equals-default
+		,-modernize-use-equals-delete
+		,-modernize-use-override
+		,-modernize-use-using
+		,-modernize-pass-by-value
+		,-performance-inefficient-string-concatenation
+		,-readability-avoid-const-params-in-decls
+		,-readability-else-after-return
+		,-readability-implicit-bool-cast
+		,-readability-inconsistent-declaration-parameter-name
+		,-readability-non-const-parameter
+		,-readability-redundant-declaration
+		,-readability-redundant-member-init
+		,-readability-simplify-boolean-expr
+		'
 WarningsAsErrors: '*'
-CheckOptions:
+CheckOptions:    
+  - key:             google-readability-braces-around-statements.ShortStatementLines
+    value:           '1'
  - key:             google-readability-function-size.BranchThreshold
    value:           '600'
  - key:             google-readability-function-size.LineThreshold
    value:           '4000'
  - key:             google-readability-function-size.StatementThreshold
    value:           '4000'
-...
+  - key:             readability-braces-around-statements.ShortStatementLines
+    value:           '1'
+  - key:             readability-function-size.LineThreshold
+    value:           '4000'
+  - key:             readability-function-size.StatementThreshold
+    value:           '4000'
@@ -1,7 +0,0 @@
-FROM gcr.io/oss-fuzz-base/base-builder:v1
-COPY . $SRC/PX4-Autopilot
-RUN apt-get install -y libjpeg8-dev zlib1g-dev
-RUN pip3 install --upgrade pip
-RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
-WORKDIR $SRC/PX4-Autopilot
-COPY ./.clusterfuzzlite/build.sh $SRC/
@@ -1,4 +0,0 @@
-#!/usr/bin/env bash -eu
-
-PX4_FUZZ=1 make px4_sitl
-cp build/px4_sitl_default/bin/px4 $OUT/px4
@@ -1 +0,0 @@
-language: c++
@@ -1,44 +0,0 @@
-// For format details, see https://aka.ms/vscode-remote/devcontainer.json or this file's README at:
-// https://github.com/microsoft/vscode-dev-containers/tree/v0.134.0/containers/cpp
-{
-	"name": "px4-dev-nuttx",
-	"image": "px4io/px4-dev-nuttx-focal:2022-08-12",
-
-	"runArgs": [ "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined" ],
-
-	// Set *default* container specific settings.json values on container create.
-	"settings": {
-		"terminal.integrated.shell.linux": "/bin/bash"
-	},
-
-	// Add the IDs of extensions you want installed when the container is created.
-	"extensions": [
-		"chiehyu.vscode-astyle",
-		"dan-c-underwood.arm",
-		"editorconfig.editorconfig",
-		"fredericbonnet.cmake-test-adapter",
-		"github.vscode-pull-request-github",
-		"marus25.cortex-debug",
-		"ms-azuretools.vscode-docker",
-		"ms-iot.vscode-ros",
-		"ms-python.python",
-		"ms-vscode.cmake-tools",
-		"ms-vscode.cpptools",
-		"ms-vscode.cpptools-extension-pack",
-		"redhat.vscode-yaml",
-		"streetsidesoftware.code-spell-checker",
-		"twxs.cmake",
-		"uavcan.dsdl",
-		"wholroyd.jinja",
-		"zixuanwang.linkerscript",
-		"ms-vscode.makefile-tools"
-	],
-
-	"containerUser": "user",
-	"containerEnv": {
-		"LOCAL_USER_ID": "${localEnv:UID}"
-	},
-
-	// Use 'forwardPorts' to make a list of ports inside the container available locally.
-	"forwardPorts": [14556],
-}
@@ -1,14 +0,0 @@
-root = true
-
-[*]
-insert_final_newline = true
-
-[{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
-indent_style = tab
-tab_width = 8
-# Not in the official standard, but supported by many editors
-max_line_length = 120
-
-[*.yaml, *.yml]
-indent_style = space
-indent_size = 2
@@ -1,80 +0,0 @@
-* text=auto eol=lf
-
-*.cmake  text eol=lf
-*.c      text eol=lf
-*.cc     text eol=lf
-*.cpp    text eol=lf
-*.h      text eol=lf
-*.hh     text eol=lf
-*.hpp    text eol=lf
-*.hxx    text eol=lf
-*.S      text eol=lf
-
-*.ipynb  text eol=lf
-*.m      text eol=lf
-*.mat    binary
-*.py     text eol=lf
-
-*.java   text eol=lf
-*.jar    binary
-*.xml    text eol=lf
-
-# PX4 msgs, etc
-*.bin    binary
-*.msg    text eol=lf
-*.config text eol=lf
-*.sdf    text eol=lf
-*.uavcan text eol=lf
-
-# NuttX
-Makefile.* text eol=lf
-*.defs   text eol=lf
-*.ld     text eol=lf
-
-*.csv    text eol=lf
-*.md     text eol=lf
-*.txt    text eol=lf
-
-# Scripts
-*.bash   text eol=lf
-*.sh     text eol=lf
-*.zsh    text eol=lf
-# These are explicitly windows files and should use crlf
-*.ps1    text eol=crlf
-*.{cmd,[cC][mM][dD]} text eol=crlf
-*.{bat,[bB][aA][tT]} text eol=crlf
-
-# Serialisation
-*.json   text eol=lf
-*.toml   text eol=lf
-*.xml    text eol=lf
-*.yaml   text eol=lf
-*.yml    text eol=lf
-
-# Graphics
-*.png    binary
-*.jpg    binary
-*.jpeg   binary
-*.gif    binary
-*.tif    binary
-*.tiff   binary
-*.ico    binary
-*.pdf    binary
-# SVG treated as an asset (binary) by default.
-*.svg    text eol=lf
-
-# Text files where line endings should be preserved
-*.patch  -text
-
-# Archives
-*.7z     binary
-*.gz     binary
-*.tar    binary
-*.tgz    binary
-*.zip    binary
-*.hex    binary
-
-# everything else
-.gitattributes text eol=lf
-.gitignore     text eol=lf
-Makefile       text eol=lf
@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve
+
+---
+
+**Describe the bug**
+A clear and concise description of the bug.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Drone switched on '...'
+2. Uploaded mission '....' (attach QGC mission file)
+3. Took off '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Log Files and Screenshots**
+*Always* provide a link to the flight log file:
+- Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/en/getting_started/flight_reporting.html)).
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
+
+Add screenshots to help explain your problem.
+
+**Drone (please complete the following information):**
+- Describe the type of drone.
+- Photo of the IMU / autopilot setup if possible.
+
+**Additional context**
+Add any other context about the problem here.
@@ -1,94 +0,0 @@
-name: 🐛 Bug report
-description: Create a report to help us improve
-title: "[Bug] "
-labels: ["bug-report"]
-body:
-  - type: textarea
-    attributes:
-      label: Describe the bug
-      description: A clear and concise description of the bug.
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: To Reproduce
-      description: |
-          Steps to reproduce the behavior.
-          1. Drone switched on '...'
-          2. Uploaded mission '....' (attach QGC mission file)
-          3. Took off '....'
-          4. See error
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Expected behavior
-      description: A clear and concise description of what you expected to happen.
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Screenshot / Media
-      description: Add screenshot / media if you have them
-
-  - type: textarea
-    attributes:
-      label: Flight Log
-      description: |
-          *Always* provide a link to the flight log file:
-          - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/main/en/getting_started/flight_reporting.html)).
-          - Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
-          - Share the link to the log (Copy and paste the URL of the log)
-      placeholder: |
-          # PASTE HERE THE LINK TO THE LOG
-    validations:
-      required: false
-
-  - type: markdown
-    attributes:
-      value: |
-        ## Setup
-
-  - type: textarea
-    attributes:
-      label: Software Version
-      description: |
-          Which version of PX4 are you using?
-      placeholder: |
-          # If you don't know the version, paste the output of `ver all` in the MAVLink Shell of QGC
-    validations:
-      required: false
-
-  - type: input
-    attributes:
-      label: Flight controller
-      description: Specify your flight controller model (what type is it, where was it bought from, ...).
-    validations:
-      required: false
-
-  - type: dropdown
-    attributes:
-      label: Vehicle type
-      options:
-        - Multicopter
-        - Helicopter
-        - Fixed Wing
-        - Hybrid VTOL
-        - Airship/Balloon
-        - Rover
-        - Boat
-        - Submarine
-        - Other
-
-  - type: textarea
-    attributes:
-      label: How are the different components wired up (including port information)
-      description: Details about how all is wired.
-
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: Add any other context about the problem here.
@@ -1,8 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Support Question
-    url: https://docs.px4.io/main/en/contribute/support.html#forums-and-chat
-    about: For questions about using PX4 or related components, please use the discuss forum and discord server
-  - name: Documentation Issue
-    url: https://github.com/PX4/PX4-user_guide/issues
-    about: If you found an issue in documentation, please submit it directly to the docs repository issues
@@ -0,0 +1,19 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+
+---
+
+For general questions please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/).
+
+**Describe problem solved by the proposed feature**
+A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
+
+**Describe your preferred solution**
+A clear and concise description of what you want to happen.
+
+**Describe possible alternatives**
+A clear and concise description of alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots for the feature request here.
@@ -1,35 +0,0 @@
-name: 🚀 Feature Request
-description: Suggest an idea for this project
-labels: ["feature-request"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        ## Please note that feature requests are not 'fire and forget'
-        It is a lot more likely that the feature you would like to have will be implemented if you keep watching your feature request, and provide more details to developers looking into implementing your feature, and help them with testing.
-
-  - type: textarea
-    attributes:
-      label: Describe problem solved by the proposed feature
-      description: A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Describe your preferred solution
-      description: A clear and concise description of what you want to happen.
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Describe possible alternatives
-      description: A clear and concise description of any alternative solutions or features you've considered.
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: Add any other context or screenshots for the feature request here.
@@ -1,37 +0,0 @@
-<!--
-
-Thank you for your contribution!
-
-Get early feedback through
- Dronecode Discord: https://discord.gg/dronecode
- PX4 Discuss: http://discuss.px4.io/
- opening a draft pr and sharing the link
-
-->
-
-### Solved Problem
-When ... I found that ...
-
-Fixes #{Github issue ID}
-
-### Solution
- Add ... for ...
- Refactor ...
-
-### Changelog Entry
-For release notes:
-```
-Feature/Bugfix XYZ
-New parameter: XYZ_Z
-Documentation: Need to clarify page ... / done, read docs.px4.io/...
-```
-
-### Alternatives
-We could also ...
-
-### Test coverage
- Unit/integration test: ...
- Simulation/hardware testing logs: https://review.px4.io/
-
-### Context
-Related links, screenshot before/after, video
@@ -0,0 +1,55 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 60
+
+# Number of days of inactivity before a stale Issue or Pull Request is closed.
+# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
+daysUntilClose: 14
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
+exemptLabels:
+  - priority-crtical
+  - security
+  - "[Status] Maybe Later"
+
+# Set to true to ignore issues in a project (defaults to false)
+exemptProjects: true
+
+# Set to true to ignore issues in a milestone (defaults to false)
+exemptMilestones: true
+
+# Label to use when marking as stale
+staleLabel: status/STALE
+
+# Comment to post when marking as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  recent activity. It will be closed in 2 weeks if no further activity occurs. Thank you
+  for your contributions.
+
+# Comment to post when removing the stale label.
+# unmarkComment: >
+#   Your comment here.
+
+# Comment to post when closing a stale Issue or Pull Request.
+ closeComment: >
+   Closing as stale.
+
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 10
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
+# pulls:
+#   daysUntilStale: 30
+#   markComment: >
+#     This pull request has been automatically marked as stale because it has not had
+#     recent activity. It will be closed if no further activity occurs. Thank you
+#     for your contributions.
+
+# issues:
+#   exemptLabels:
+#     - confirmed
@@ -1,164 +0,0 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
-name: Build all targets
-
-on:
-  push:
-    tags:
-      - 'v*'
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-      - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  group_targets:
-    name: Scan for Board Targets
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    outputs:
-      matrix: ${{ steps.set-matrix.outputs.matrix }}
-      timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
-      tagname: ${{ steps.set-tag.outputs.tagname }}
-      branchname: ${{ steps.set-branch.outputs.branchname }}
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Update python packaging to avoid canonicalize_version() error
-        run: |
-            pip3 install -U packaging
-
-      - name: Install Python Dependencies
-        uses: py-actions/py-dependency-install@v4
-        with:
-          path: "./Tools/setup/requirements.txt"
-
-      - id: set-matrix
-        run: echo "::set-output name=matrix::$(./Tools/ci/generate_board_targets_json.py --group)"
-
-      - id: set-timestamp
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
-
-      - id: set-branch
-        run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"
-
-      - name: Debug Matrix Output
-        if: runner.debug == '1'
-        run: |
-          echo "${{ steps.set-timestamp.outputs.timestamp }}"
-          echo "${{ steps.set-branch.outputs.branchname }}"
-          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
-
-  setup:
-    name: Build Group [${{ matrix.group }}]
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: group_targets
-    strategy:
-      matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
-      fail-fast: false
-    container:
-      image: ${{ matrix.container }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Git ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Setup ccache
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-
-      - name: Configure ccache
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
-
-      - name: Building [${{ matrix.group }}]
-        run: |
-            ./Tools/ci/build_all_runner.sh ${{matrix.targets}}
-
-      - name: Arrange Build Artifacts
-        run: |
-          ./Tools/ci/package_build_artifacts.sh
-
-      - name: Upload Build Artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: px4_${{matrix.group}}_build_artifacts
-          path: artifacts/
-
-      - name: Cache Save
-        run: ccache -s
-
-  artifacts:
-    name: Upload Artifacts to S3
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Branch Name
-        run: |
-          echo "${{ needs.group_targets.outputs.branchname }}"
-
-      - name: Uploading Artifacts to S3 [${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}]
-        uses: jakejarvis/s3-sync-action@master
-        with:
-          args: --acl public-read
-        env:
-          AWS_S3_BUCKET: 'px4-travis'
-          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-          AWS_REGION: 'us-west-1'
-          SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}/
-
-  release:
-    name: Create Release and Upload Artifacts
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/v')
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Upload Binaries to Release
-        uses: softprops/action-gh-release@v2
-        with:
-          draft: true
-          files: artifacts/*.px4
@@ -1,34 +0,0 @@
-name: ClusterFuzzLite batch fuzzing
-on:
-  schedule:
-    - cron: '0 6 * * *'  # UTC 6am every day.
-permissions: read-all
-jobs:
-  BatchFuzzing:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        sanitizer:
-        - address
-        - undefined
-        - memory
-    steps:
-    - name: Build Fuzzers (${{ matrix.sanitizer }})
-      id: build
-      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
-      with:
-        sanitizer: ${{ matrix.sanitizer }}
-    - name: Run Fuzzers (${{ matrix.sanitizer }})
-      id: run
-      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        fuzz-seconds: 1800 # 30 mins
-        mode: 'batch'
-        sanitizer: ${{ matrix.sanitizer }}
-        # Optional but recommended: For storing certain artifacts from fuzzing.
-        # See later section on "Git repo for storage".
-        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
-        # storage-repo-branch: main   # Optional. Defaults to "main"
-        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".
@@ -1,57 +0,0 @@
-name: Checks
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        check: [
-          "check_format",
-          "check_newlines",
-          "tests",
-          "tests_coverage",
-          "px4_fmu-v2_default stack_check",
-          "validate_module_configs",
-          "shellcheck_all",
-          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
-          "NO_NINJA_BUILD=1 px4_sitl_default",
-          "px4_sitl_allyes",
-          "module_documentation",
-        ]
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Building [${{ matrix.check }}]
-        uses: addnab/docker-run-action@v3
-        with:
-          image: px4io/px4-dev-nuttx-focal:2022-08-12
-          options: -v ${{ github.workspace }}:/workspace
-          run: |
-            cd /workspace
-            git config --global --add safe.directory /workspace
-            make ${{ matrix.check }}
-
-      - name: Uploading Coverage to Codecov.io
-        if: contains(matrix.check, 'coverage')
-        uses: codecov/codecov-action@v1
-        with:
-          token: ${{ secrets.CODECOV_TOKEN }}
-          flags: unittests
-          file: coverage/lcov.info
@@ -1,32 +0,0 @@
-name: Clang Tidy
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Testing (clang-tidy-quiet)
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-clang:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
-        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make clang-tidy-quiet
@@ -1,64 +0,0 @@
-name: MacOS build
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: macos-latest
-    strategy:
-      matrix:
-        config: [
-          px4_fmu-v5_default,
-          px4_sitl
-          ]
-    steps:
-    - name: install Python 3.10
-      uses: actions/setup-python@v5
-      with:
-        python-version: "3.10"
-
-    - uses: actions/checkout@v4
-
-    - name: setup
-      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v4
-      with:
-        path: ~/.ccache
-        key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: macos_${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 40M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: |
-          ccache -z
-          make ${{matrix.config}}
-          ccache -s
@@ -1,52 +0,0 @@
-name: Ubuntu environment build
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-      - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build_and_test:
-    name: Build and Test
-    strategy:
-      fail-fast: false
-      matrix:
-        version: ['ubuntu:22.04', 'ubuntu:24.04']
-    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: ${{ matrix.version }}
-      volumes:
-        - /github/workspace:/github/workspace
-    steps:
-
-      - name: Fix git in container
-        run: |
-          # we only need this because we are running the job in a container
-          # when checkout pulls git it does it in a shared volume
-          # and file ownership changes between steps
-          # first we install git since its missing from the base image
-          # then we mark the directory as safe for other instances
-          # of git to use.
-          apt update && apt install git -y
-          git config --global --add safe.directory $(realpath .)
-
-      - uses: actions/checkout@v4
-
-      - name: Install Deps, Build, and Make Quick Check
-        run: |
-          # we need to install dependencies and build on the same step
-          # given the stateless nature of docker images
-          ./Tools/setup/ubuntu.sh
-          make quick_check
@@ -1,107 +0,0 @@
-
-name: Container build
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'stable'
-      - 'beta'
-      - 'release/**'
-    tags:
-      - 'v*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-      - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    name: Build and Push Container
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-tags: true
-          submodules: false
-          fetch-depth: 0
-
-      - name: Set PX4 Tag
-        id: px4-tag
-        run: |
-          echo "tag=$(git describe --tags --match 'v[0-9]*')" >> $GITHUB_OUTPUT
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        if: github.event_name != 'pull_request'
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v3
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta
-        uses: docker/metadata-action@v5
-        with:
-          images: |
-            ghcr.io/PX4/px4-dev
-            ${{ (github.event_name != 'pull_request') && 'px4io/px4-dev' || '' }}
-          tags: |
-            type=raw,enable=true,value=${{ steps.px4-tag.outputs.tag }},priority=1000
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-      - name: Build and load container image
-        uses: docker/build-push-action@v6
-        id: docker
-        with:
-          context: Tools/setup
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: |
-            linux/amd64
-          load: true
-          push: false
-          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
-          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max
-
-      - name: Get Tag Name
-        id: tag_name
-        run: |
-          echo "::set-output name=tag_name::$(echo '${{ fromJSON(steps.docker.outputs.metadata)['image.name'] }}' | sed 's/,.*$//')"
-
-      - name: make quick_check
-        uses: addnab/docker-run-action@v3
-        with:
-          image: ${{ steps.tag_name.outputs.tag_name }}
-          options: -v ${{ github.workspace }}:/workspace
-          run: |
-            cd /workspace
-            git config --global --add safe.directory /workspace
-            make px4_sitl_default
-            make px4_fmu-v6x_default
-
-      - name: Push container image
-        uses: docker/build-push-action@v6
-        with:
-          context: Tools/setup
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: |
-            linux/amd64
-          provenance: mode=max
-          push: ${{ github.event_name != 'pull_request' }}
-          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
-          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max
@@ -1,55 +0,0 @@
-name: Docs - Crowdin - Download Guide Translations
-
-# https://github.com/crowdin/github-action/tree/master
-
-on:
-  schedule:
-    - cron: '0 0 * * 0' # Runs every Sunday at 00:00 UTC
-  workflow_dispatch:
-
-permissions:
-  contents: write
-  pull-requests: write
-
-jobs:
-  synchronize-with-crowdin:
-    name: Synchronize with Crowdin
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      max-parallel: 1 # Should be 1 to avoid parallel builds
-      matrix:
-        lc: [ko, uk, zh-CN] # Target languages https://developer.crowdin.com/language-codes/
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-      - name: Debug Environment Variables
-        run: |
-          echo "CROWDIN_PROJECT_ID: ${{ secrets.CROWDIN_DOCS_PROJECT_ID }}"
-          echo "CROWDIN_PERSONAL_TOKEN: ${{ secrets.PX4BUILDBOT_CROWDIN_PERSONAL_TOKEN }}"
-      - name: Matrix
-        uses: crowdin/github-action@v2
-        with:
-          config: 'docs/crowdin_docs.yml'
-          upload_sources: false
-          upload_translations: false
-          download_translations: true
-          commit_message: New Crowdin translations - ${{ matrix.lc }}
-          localization_branch_name: l10n_crowdin_docs_translations_${{ matrix.lc }}
-          crowdin_branch_name: main
-          create_pull_request: true
-          pull_request_base_branch_name: 'main'
-          pull_request_title: New PX4 guide translations (Crowdin) - ${{ matrix.lc }}
-          pull_request_body: 'New PX4 guide Crowdin translations by [Crowdin GH Action](https://github.com/crowdin/github-action) for ${{ matrix.lc }}'
-          pull_request_labels: 'Documentation 📑'
-          pull_request_reviewers: hamishwillee
-          download_language: ${{ matrix.lc }}
-        env:
-          # A classic GitHub Personal Access Token with the 'repo' scope selected (the user should have write access to the repository).
-          GITHUB_TOKEN: ${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}
-
-          # A numeric ID, found at https://crowdin.com/project/<projectName>/tools/api
-          CROWDIN_PROJECT_ID: ${{ secrets.CROWDIN_DOCS_PROJECT_ID }}
-
-          # Visit https://crowdin.com/settings#api-key to create this token
-          CROWDIN_PERSONAL_TOKEN: ${{ secrets.PX4BUILDBOT_CROWDIN_PERSONAL_TOKEN }}
@@ -1,44 +0,0 @@
-name: Docs - Crowdin - Upload Guide sources (en)
-
-# https://github.com/crowdin/github-action/tree/master
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - 'docs/en/**'
-  #pull_request:
-  #  types:
-  #    - closed
-  #  branches:
-  #    - main
-  #  paths:
-  #    - 'docs/en/**'
-  workflow_dispatch:
-
-jobs:
-  upload-to-crowdin:
-    #if: github.event.pull_request.merged == true || github.event_name == 'push'  || github.event_name == 'workflow_dispatch'
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-      - name: crowdin push
-        uses: crowdin/github-action@v2
-        with:
-          config: 'docs/crowdin_docs.yml'
-          upload_sources: true
-          upload_translations: false
-          download_translations: false
-          crowdin_branch_name: main
-        env:
-          # A classic GitHub Personal Access Token with the 'repo' scope selected (the user should have write access to the repository).
-          GITHUB_TOKEN: ${{ secrets.PX4BUILDBOT_ACCESSTOKEN }}
-
-          # A numeric ID, found at https://crowdin.com/project/<projectName>/tools/api
-          CROWDIN_PROJECT_ID: ${{ secrets.CROWDIN_DOCS_PROJECT_ID }}
-
-          # Visit https://crowdin.com/settings#api-key to create this token
-          CROWDIN_PERSONAL_TOKEN: ${{ secrets.PX4BUILDBOT_CROWDIN_PERSONAL_TOKEN }}
@@ -1,94 +0,0 @@
-name: Docs - Deploy PX4 User Guide
-
-on:
-  push:
-    branches:
-      - 'main'
-      - 'release/**'
-    paths:
-      - 'docs/en/**'
-  pull_request:
-    branches:
-      - '*'
-    paths:
-      - 'docs/en/**'
-
-  # Allows you to run this workflow manually from the Actions tab
-  workflow_dispatch:
-
-# Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
-permissions:
-  contents: read
-  pages: write
-  id-token: write
-
-# Allow only one concurrent deployment, skipping runs queued between the run in-progress and latest queued.
-# However, do NOT cancel in-progress runs as we want to allow these production deployments to complete.
-concurrency:
-  group: pages
-  cancel-in-progress: false
-
-env:
-  BRANCH_NAME: ${{ github.head_ref || github.ref_name }}
-
-jobs:
-  build:
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
-    steps:
-      - uses: runs-on/action@v1
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20
-          cache: npm
-          # Specify the path to lock file for correct caching
-          cache-dependency-path: ./docs/yarn.lock
-
-      - name: Install dependencies
-        run: yarn install --frozen-lockfile --cwd ./docs
-
-      - name: Build with VitePress
-        working-directory: ./docs
-        run: |
-          npm run docs:build_ubuntu
-          touch .vitepress/dist/.nojekyll
-          npm run docs:sitemap
-
-      - name: Upload artifact
-        if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: px4_docs_build
-          path: docs/.vitepress/dist/
-          retention-days: 1
-
-  deploy:
-    if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
-    needs: build
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-
-    steps:
-      - name: Download Artifact
-        uses: actions/download-artifact@v4
-        with:
-          name: px4_docs_build
-          path: ~/_book
-
-      - name: Deploy
-        run: |
-          git clone --single-branch --branch main https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
-          rm -rf docs.px4.io/${BRANCH_NAME}
-          mkdir -p docs.px4.io/${BRANCH_NAME}
-          cp -r ~/_book/* docs.px4.io/${BRANCH_NAME}/
-          cd docs.px4.io
-          git config --global user.name "${{ secrets.PX4BUILDBOT_USER }}"
-          git config --global user.email "${{ secrets.PX4BUILDBOT_EMAIL }}"
-          git add ${BRANCH_NAME}
-          git commit -a -m "PX4 docs build update (vitepress) `date`"
-          #git add .
-          #git commit --amend -m "PX4 docs build update (vitepress) `date`"
-          #git commit --allow-empty -m "Empty commit to force rebuild"
-          git push origin main -f
@@ -1,74 +0,0 @@
-name: Docs - Check for flaws in PX4 Guide Source
-# So far:
-  # Modifications of translations files
-  # Broken internal links
-
-on:
-  pull_request_target:
-    types: [opened, edited, synchronize]
-    paths:
-      - 'docs/en/**'
-
-jobs:
-  check_flaws:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          ref: ${{ github.event.pull_request.head.sha }}
-
-      - name: Install Node.js
-        uses: actions/setup-node@v3
-        with:
-          node-version: '18'
-
-      - name: Create logs directory
-        run: |
-          mkdir logs
-
-      - name: Get changed english doc files
-        id: get_changed_markdown_english
-        uses: tj-actions/changed-files@v35.9.2
-        with:
-          json: true
-          base_sha: "${{ github.event.pull_request.base.sha }}"
-          sha: "${{ github.event.pull_request.head.sha }}"
-          # Below are used to output files to a directory. May use in flaw checker.
-          # write_output_files: true
-          # output_dir: "./logs"
-          files: |
-            docs/en/**/*.md
-
-      - name: Save JSON file containing files to link check
-        run: |
-          echo "${{ steps.get_changed_markdown_english.outputs.all_changed_files }}"
-          echo "${{ steps.get_changed_markdown_english.outputs.all_changed_files }}" > ./logs/prFiles.json
-
-      - name: Run link checker
-        id: link-check
-        run: |
-          npm -g install markdown_link_checker_sc@0.0.138
-          markdown_link_checker_sc -r ${{ github.workspace }} -d docs -e en -f ./logs/prFiles.json -i assets -u docs.px4.io/main/ > ./logs/errorsFilteredByPrPages.md
-          mkdir -p ./pr
-          cp ./logs/errorsFilteredByPrPages.md ./pr/errorsFilteredByPrPages.md
-
-      - name: Read errorsFilteredByPrPages.md file
-        id: read-errors-by-page
-        uses: juliangruber/read-file-action@v1
-        with:
-          path: ./logs/errorsFilteredByPrPages.md
-
-      - name: Echo Errors by Page
-        run: echo "${{ steps.read-errors-by-page.outputs.content }}"
-
-      - name: Save PR number
-        env:
-          PR_NUMBER: ${{ github.event.number }}
-        run: |
-          #mkdir -p ./pr
-          echo $PR_NUMBER > ./pr/pr_number
-      - uses: actions/upload-artifact@v4
-        with:
-          name: pr_number
-          path: pr/
@@ -1,107 +0,0 @@
-name: Docs - Comment Workflow
-on:
-  workflow_run:
-    workflows: ["Docs - Check for flaws in PX4 Guide Source"]
-    types:
-      - completed
-jobs:
-  comment:
-    permissions:
-      pull-requests: write # for marocchino/sticky-pull-request-comment
-    name: Comments
-    runs-on: ubuntu-latest
-    steps:
-      - name: 'Download PR artifact'
-        uses: actions/github-script@v6
-        with:
-          script: |
-            let allArtifacts = await github.rest.actions.listWorkflowRunArtifacts({
-               owner: context.repo.owner,
-               repo: context.repo.repo,
-               run_id: context.payload.workflow_run.id,
-            });
-            let matchArtifact = allArtifacts.data.artifacts.filter((artifact) => {
-              return artifact.name == "pr_number"
-            })[0];
-            let download = await github.rest.actions.downloadArtifact({
-               owner: context.repo.owner,
-               repo: context.repo.repo,
-               artifact_id: matchArtifact.id,
-               archive_format: 'zip',
-            });
-            let fs = require('fs');
-            fs.writeFileSync(`${process.env.GITHUB_WORKSPACE}/pr_number.zip`, Buffer.from(download.data));
-
-      - name: 'Unzip artifact'
-        run: unzip pr_number.zip
-
-      # Doesn't work across workflows
-      #- name: Get artifacts from flaw checker workflow
-      #  uses: actions/download-artifact@v3
-      #  with:
-      #    name: logs_and_errors
-      #    #path: ./logs
-
-      - name: Read errorsFilteredByPrPages.md file
-        id: read-errors-by-page
-        uses: juliangruber/read-file-action@v1
-        with:
-          path: ./errorsFilteredByPrPages.md
-
-      - name: Read PR number
-        id: read-error-pr-number
-        uses: juliangruber/read-file-action@v1
-        with:
-          path: ./pr_number
-
-      - name: File detail info
-        run: |
-          echo "${{ steps.read-errors-by-page.outputs.content }}"
-          echo "${{ steps.read-error-pr-number.outputs.content }}"
-
-      - name: Create or update comment
-        id: comment_to_pr
-        uses: marocchino/sticky-pull-request-comment@v2
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          recreate: true
-          number: ${{ steps.read-error-pr-number.outputs.content }}
-          header: flaws
-          message: ${{ steps.read-errors-by-page.outputs.content || 'No flaws found' }}
-
-      #- name: Dump GitHub context
-      #  env:
-      #    GITHUB_CONTEXT: ${{ toJSON(github) }}
-      #  run: echo "$GITHUB_CONTEXT"
-
-      # Would like to do this, but it doesn't work (for me).
-      # Moving to time-based, or triggering on workflow
-      #- name: Wait for artifacts upload to succeed
-      #  uses: lewagon/wait-on-check-action@v1.3.1
-      #  with:
-      #    ref: ${{ github.ref }}
-      #    check-name: 'Archive production artifacts'
-      #    repo-token: ${{ secrets.GITHUB_TOKEN }}
-      #    wait-interval: 80
-
-      # Not needed for now - trying to trigger off the workflow
-      #- name: Sleep for 80 seconds
-      #  run: sleep 80s
-      #  shell: bash
-      #- name: Find Comment
-      #  uses: peter-evans/find-comment@v2
-      #  id: fc
-      #  with:
-      #    issue-number: ${{ steps.read-error-pr-number.outputs.content }}
-      #    comment-author: 'github-actions[bot]'
-      #    body-includes: Flaws (may be none)
-
-      #- name: Create or update comment
-      #  uses: peter-evans/create-or-update-comment@v3
-      #  with:
-      #    comment-id: ${{ steps.fc.outputs.comment-id }}
-      #    issue-number: ${{ steps.read-error-pr-number.outputs.content }}
-      #    body: |
-      #      Flaws (may be none)
-      #      ${{ steps.read-errors-by-page.outputs.content }}
-      #    edit-mode: replace
@@ -1,31 +0,0 @@
-name: EKF Change Indicator
-
-on:
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  unit_tests:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: main test
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-base-focal:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
-        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make tests TESTFILTER=EKF
-
-    - name: Check if there is a functional change
-      run: git diff --exit-code
-      working-directory: src/modules/ekf2/test/change_indication
@@ -1,48 +0,0 @@
-name: EKF Update Change Indicator
-
-on:
-  push:
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  unit_tests:
-    runs-on: ubuntu-latest
-    env:
-      GIT_COMMITTER_EMAIL: bot@px4.io
-      GIT_COMMITTER_NAME: PX4BuildBot
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: main test
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-base-focal:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
-        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make tests TESTFILTER=EKF
-
-    - name: Check if there exists diff and save result in variable
-      id: diff-check
-      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_OUTPUT
-      working-directory: src/modules/ekf2/test/change_indication
-
-    - name: auto-commit any changes to change indication
-      uses: stefanzweifel/git-auto-commit-action@v4
-      with:
-        file_pattern: 'src/modules/ekf2/test/change_indication/*.csv'
-        commit_user_name: ${GIT_COMMITTER_NAME}
-        commit_user_email: ${GIT_COMMITTER_EMAIL}
-        commit_message: |
-          '[AUTO COMMIT] update change indication'
-
-          See .github/workflopws/ekf_update_change_indicator.yml for more details
-
-    - name: if there is a functional change, fail check
-      if: ${{ steps.diff-check.outputs.CHANGE_INDICATED }}
-      run: exit 1
@@ -1,52 +0,0 @@
-name: Failsafe Simulator Build
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    defaults:
-      run:
-        shell: bash
-    strategy:
-      fail-fast: false
-      matrix:
-        check: [
-          "failsafe_web",
-        ]
-    container:
-      image: px4io/px4-dev-nuttx-focal:2022-08-12
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-      - name: Install Node v20.18.0
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.18.0
-
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Install empscripten
-        run: |
-          git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
-          cd _emscripten_sdk
-          ./emsdk install latest
-          ./emsdk activate latest
-
-      - name: Testing [${{ matrix.check }}]
-        run: |
-          . ./_emscripten_sdk/emsdk_env.sh
-          make ${{ matrix.check }}
@@ -1,155 +0,0 @@
-name: FLASH usage analysis
-
-permissions:
-  contents: read
-  pull-requests: write
-  issues: write
-
-on:
-  push:
-    branches:
-      - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-      - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-env:
-  MIN_FLASH_POS_DIFF_FOR_COMMENT: 50
-  MIN_FLASH_NEG_DIFF_FOR_COMMENT: -50
-
-jobs:
-  analyze_flash:
-    name: Analyzing ${{ matrix.target }}
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-nuttx-focal
-    strategy:
-      matrix:
-        target: [px4_fmu-v5x, px4_fmu-v6x]
-    outputs:
-      px4_fmu-v5x-bloaty-output: ${{ steps.gen-output.outputs.px4_fmu-v5x-bloaty-output }}
-      px4_fmu-v5x-bloaty-summary-map: ${{ steps.gen-output.outputs.px4_fmu-v5x-bloaty-summary-map }}
-      px4_fmu-v6x-bloaty-output: ${{ steps.gen-output.outputs.px4_fmu-v6x-bloaty-output }}
-      px4_fmu-v6x-bloaty-summary-map: ${{ steps.gen-output.outputs.px4_fmu-v6x-bloaty-summary-map }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Git ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Build Target
-        run: make ${{ matrix.target }}_flash-analysis
-
-      - name: Store the ELF with the change
-        run: cp ./build/**/*.elf ./with-change.elf
-
-      - name: Clean previous build
-        run: |
-          make clean
-          make distclean
-
-      - name: If it's a PR checkout the base branch
-        if: ${{ github.event.pull_request }}
-        # As checkout creates a merge commit (merging the base branch into the PR branch), the base branch is the base for a diff of the PR changes.
-        run: git checkout ${{ github.event.pull_request.base.ref }}
-
-      - name: If it's a push checkout the previous commit
-        if: github.event_name == 'push'
-        run: git checkout ${{ github.event.before }}
-
-      - name: Update submodules
-        run: make submodulesupdate
-
-      - name: Build
-        run: make ${{ matrix.target }}_flash-analysis
-
-      - name: Store the ELF before the change
-        run: cp ./build/**/*.elf ./before-change.elf
-
-      - name: bloaty-action
-        uses: PX4/bloaty-action@v1.0.0
-        id: bloaty-step
-        with:
-          bloaty-file-args: ./with-change.elf -- ./before-change.elf
-          bloaty-additional-args: -d sections,compileunits -s vm -n 20
-          output-to-summary: true
-
-      - name: Generate output
-        id: gen-output
-        run: |
-          EOF=$(dd if=/dev/urandom bs=15 count=1 status=none | base64)
-          echo "${{ matrix.target }}-bloaty-output<<$EOF" >> $GITHUB_OUTPUT
-          echo "${{ steps.bloaty-step.outputs.bloaty-output-encoded }}" >> $GITHUB_OUTPUT
-          echo "$EOF" >> $GITHUB_OUTPUT
-          echo "${{ matrix.target }}-bloaty-summary-map<<$EOF" >> $GITHUB_OUTPUT
-          echo '${{ steps.bloaty-step.outputs.bloaty-summary-map }}' >> $GITHUB_OUTPUT
-          echo "$EOF" >> $GITHUB_OUTPUT
-
-  # TODO:
-  # This part of the workflow is causing errors for forks. We should find a way to fix this and enable it again for forks.
-  # Track this issue https://github.com/PX4/PX4-Autopilot/issues/24408
-  post_pr_comment:
-    name: Publish Results
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [analyze_flash]
-    env:
-      V5X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-absolute) }}
-      V5X-SUMMARY-MAP-PERC: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-percentage) }}
-      V6X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-summary-map).vm-absolute) }}
-      V6X-SUMMARY-MAP-PERC: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-summary-map).vm-percentage) }}
-    if: github.event.pull_request && github.event.pull_request.head.repo.full_name == github.repository
-    steps:
-      - name: Find Comment
-        uses: peter-evans/find-comment@v3
-        id: fc
-        with:
-          issue-number: ${{ github.event.pull_request.number }}
-          comment-author: 'github-actions[bot]'
-          body-includes: FLASH Analysis
-
-      - name: Set Build Time
-        id: bt
-        run: |
-          echo "timestamp=$(date +'%Y-%m-%dT%H:%M:%S')" >> $GITHUB_OUTPUT
-
-      - name: Create or update comment
-        # This can't be moved to the job-level conditions, as GH actions don't allow a job-level if condition to access the env.
-        if: |
-          steps.fc.outputs.comment-id != '' ||
-          env.V5X-SUMMARY-MAP-ABS >= fromJSON(env.MIN_FLASH_POS_DIFF_FOR_COMMENT) ||
-          env.V5X-SUMMARY-MAP-ABS <= fromJSON(env.MIN_FLASH_NEG_DIFF_FOR_COMMENT) ||
-          env.V6X-SUMMARY-MAP-ABS >= fromJSON(env.MIN_FLASH_POS_DIFF_FOR_COMMENT) ||
-          env.V6X-SUMMARY-MAP-ABS <= fromJSON(env.MIN_FLASH_NEG_DIFF_FOR_COMMENT)
-        uses: peter-evans/create-or-update-comment@v4
-        with:
-          comment-id: ${{ steps.fc.outputs.comment-id }}
-          issue-number: ${{ github.event.pull_request.number }}
-          body: |
-            ## 🔎 FLASH Analysis
-            <details>
-              <summary>px4_fmu-v5x [Total VM Diff: ${{ env.V5X-SUMMARY-MAP-ABS }} byte (${{ env.V5X-SUMMARY-MAP-PERC}} %)]</summary>
-
-              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-output }}
-              ```
-            </details>
-
-            <details>
-              <summary>px4_fmu-v6x [Total VM Diff: ${{ env.V6X-SUMMARY-MAP-ABS }} byte (${{ env.V6X-SUMMARY-MAP-PERC }} %)]</summary>
-
-              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-output }}
-              ```
-            </details>
-
-            **Updated: _${{ steps.bt.outputs.timestamp }}_**
-          edit-mode: replace
@@ -1,42 +0,0 @@
-name: MAVROS Mission Tests
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {vehicle: "iris",          mission: "MC_mission_box"}
-          - {vehicle: "rover",         mission: "rover_mission_1"}
-
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Build SITL and Run Tests
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-ros-melodic:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
-        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make px4_sitl_default
-          make px4_sitl_default sitl_gazebo-classic
-          ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
@@ -1,43 +0,0 @@
-name: MAVROS Offboard Tests
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris"}
-
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Build PX4 and Run Tests
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-ros-melodic:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
-        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make px4_sitl_default
-          make px4_sitl_default sitl_gazebo-classic
-          ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
@@ -1,43 +0,0 @@
-name: Nuttx Target with extra env config
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        config: [
-          px4_fmu-v5_default,
-          ]
-
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Build PX4 and Run Test [${{ matrix.config }}]
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-nuttx-focal:2022-08-12
-        options: -v ${{ github.workspace }}:/workspace
-        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          export PX4_EXTRA_NUTTX_CONFIG="CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
-          echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
-          make ${{ matrix.config }} nuttx_context
-          echo "Check that the config option is set"
-          grep CONFIG_NSH_LOGIN_PASSWORD build/${{ matrix.config }}/NuttX/nuttx/.config
@@ -1,35 +0,0 @@
-name: Python CI Checks
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: ubuntu-24.04
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Install Python3
-      run: sudo apt-get install python3 python3-setuptools python3-pip -y
-
-    - name: Install tools
-      run: python3 -m pip install mypy types-requests flake8 --break-system-packages
-
-    - name: Check MAVSDK test scripts with mypy
-      run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
-
-    - name: Check MAVSDK test scripts with flake8
-      run: $HOME/.local/bin/flake8 test/mavsdk_tests/*.py
@@ -1,123 +0,0 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
-name: ROS Integration Tests
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-ros2-galactic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-
-    - name: Git Ownership Workaround
-      run: git config --system --add safe.directory '*'
-
-    - name: Install gazebo
-      run: |
-        apt update && apt install -y gazebo11 libgazebo11-dev gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libgstreamer-plugins-base1.0-dev
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v4
-      with:
-        path: ~/.ccache
-        key: ros_integration_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ros_integration_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-        mkdir -p ~/.ccache
-        echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-        echo "compression = true" >> ~/.ccache/ccache.conf
-        echo "compression_level = 6" >> ~/.ccache/ccache.conf
-        echo "max_size = 300M" >> ~/.ccache/ccache.conf
-        echo "hash_dir = false" >> ~/.ccache/ccache.conf
-        ccache -s
-        ccache -z
-
-    - name: Get and build micro-xrce-dds-agent
-      run: |
-        cd /opt
-        git clone --recursive https://github.com/eProsima/Micro-XRCE-DDS-Agent.git
-        cd Micro-XRCE-DDS-Agent
-        git checkout v2.2.1 # recent versions require cmake 3.22, but px4-dev-ros2-galactic:2021-09-08 is on 3.16
-        sed -i 's/_fastdds_tag 2.8.x/_fastdds_tag 2.8.2/g' CMakeLists.txt
-        mkdir build
-        cd build
-        cmake ..
-        make -j2
-    - name: ccache post-run micro-xrce-dds-agent
-      run: ccache -s
-
-    - name: Get and build the ros2 interface library
-      shell: bash
-      run: |
-        PX4_DIR="$(pwd)"
-        . /opt/ros/galactic/setup.bash
-        mkdir -p /opt/px4_ws/src
-        cd /opt/px4_ws/src
-        git clone --recursive https://github.com/Auterion/px4-ros2-interface-lib.git
-        cd ..
-        # Copy messages to ROS workspace
-        "${PX4_DIR}/Tools/copy_to_ros_ws.sh" "$(pwd)"
-        rm -rf src/translation_node src/px4_msgs_old
-        colcon build --symlink-install
-    - name: ccache post-run ros workspace
-      run: ccache -s
-
-    - name: Build PX4
-      run: make px4_sitl_default
-    - name: ccache post-run px4/firmware
-      run: ccache -s
-    - name: Build SITL Gazebo
-      run: make px4_sitl_default sitl_gazebo-classic
-    - name: ccache post-run sitl_gazebo-classic
-      run: ccache -s
-
-    - name: Core dump settings
-      run: |
-        ulimit -c unlimited
-        echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run tests
-      shell: bash
-      run: |
-        . /opt/px4_ws/install/setup.bash
-        /opt/Micro-XRCE-DDS-Agent/build/MicroXRCEAgent udp4 localhost -p 8888 -v 0 &
-        test/ros_test_runner.py --verbose --model iris --upload --force-color
-      timeout-minutes: 45
-
-    - name: Upload failed logs
-      if: failure()
-      uses: actions/upload-artifact@v4
-      with:
-        name: failed-logs.zip
-        path: |
-          logs/**/**/**/*.log
-          logs/**/**/**/*.ulg
-          build/px4_sitl_default/tmp_ros_tests/rootfs/log/**/*.ulg
@@ -1,58 +0,0 @@
-name: ROS Translation Node Tests
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-defaults:
-  run:
-    shell: bash
-jobs:
-  build_and_test:
-    name: Build and test
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {ros_version: "humble", ubuntu: "jammy"}
-          - {ros_version: "jazzy", ubuntu: "noble"}
-    container:
-      image: rostooling/setup-ros-docker:ubuntu-${{ matrix.config.ubuntu }}-latest
-    steps:
-      - name: Setup ROS 2 (${{ matrix.config.ros_version }})
-        uses: ros-tooling/setup-ros@v0.7
-        with:
-          required-ros-distributions: ${{ matrix.config.ros_version }}
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      # Workaround for https://github.com/actions/runner/issues/2033
-      - name: ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: Check .msg file versioning
-        if: github.event_name == 'pull_request'
-        run: |
-          ./Tools/ci/check_msg_versioning.sh ${{ github.event.pull_request.base.sha }} ${{github.event.pull_request.head.sha}}
-
-      - name: Build and test
-        run: |
-          ros_ws=/ros_ws
-          mkdir -p $ros_ws/src
-          ./Tools/copy_to_ros_ws.sh $ros_ws
-          cd $ros_ws
-          source /opt/ros/${{ matrix.config.ros_version }}/setup.sh
-          colcon build --cmake-args -DCMAKE_BUILD_TYPE=Release --symlink-install --event-handlers=console_cohesion+
-          source ./install/setup.sh
-          ./build/translation_node/translation_node_unit_tests
@@ -1,159 +0,0 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
-name: SITL Tests
-
-on:
-  push:
-    branches:
-    - 'main'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-  pull_request:
-    branches:
-    - '*'
-    paths-ignore:
-      - 'docs/**'
-      - '.github/**'
-
-jobs:
-  build:
-    name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    container:
-      image: px4io/px4-dev-simulation-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
-          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
-          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich
-
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Git Ownership Workaround
-        run: git config --system --add safe.directory '*'
-
-      - id: set-timestamp
-        name: Set timestamp for cache
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
-
-      - name: Cache Key Config
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
-          restore-keys: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
-
-      - name: Cache Conf Config
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
-
-      - name: Build PX4
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default
-
-      - name: Cache Post-Run [px4_sitl_default]
-        run: ccache -s
-
-      - name: Build SITL Gazebo
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default sitl_gazebo-classic
-
-      - name: Cache Post-Run [sitl_gazebo-classic]
-        run: ccache -s
-
-      - name: Download MAVSDK
-        run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Install MAVSDK
-        run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Check PX4 Environment Variables
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: |
-            export
-            ulimit -a
-
-      - name: Build PX4 / MAVSDK tests
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-          DONT_RUN: 1
-        run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
-
-      - name: Cache Post-Run [px4_sitl_default sitl_gazebo-classic mavsdk_tests]
-        run: ccache -s
-
-      - name: Core Dump Settings
-        run: |
-            ulimit -c unlimited
-            echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-      - name: Run SITL / MAVSDK Tests
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose --force-color
-        timeout-minutes: 45
-
-      - name: Upload failed logs
-        if: failure()
-        uses: actions/upload-artifact@v4
-        with:
-          name: failed-${{matrix.config.model}}-logs.zip
-          path: |
-            logs/**/**/**/*.log
-            logs/**/**/**/*.ulg
-            build/px4_sitl_default/tmp_mavsdk_tests/rootfs/log/**/*.ulg
-
-      - name: Look at Core files
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-
-      - name: Upload PX4 coredump
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: coredump
-          path: px4.core
-
-      - name: Setup & Generate Coverage Report
-        if: contains(matrix.config.build_type, 'Coverage')
-        run: |
-            git config --global credential.helper "" # disable the keychain credential helper
-            git config --global --add credential.helper store # enable the local store credential helper
-            echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-            git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-            mkdir -p coverage
-            lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-
-      - name: Upload Coverage Information to Codecov
-        if: contains(matrix.config.build_type, 'Coverage')
-        uses: codecov/codecov-action@v4
-        with:
-          token: ${{ secrets.CODECOV_TOKEN }}
-          flags: mavsdk
-          file: coverage/lcov.info
@@ -1,16 +0,0 @@
-name: 'Handle stale issues and PRs'
-on:
-  schedule:
-    - cron: '30 1 * * *'
-
-jobs:
-  stale:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/stale@v8
-        with:
-          days-before-stale: 30
-          days-before-close: -1
-          stale-issue-label: 'stale'
-          stale-pr-label: 'stale'
-          remove-stale-when-updated: true
@@ -0,0 +1,33 @@
+# How to install:
+#   gem install github_changelog_generator
+# How to run:
+#   github_changelog_generator -u PX4 -p Firmware
+# Description:
+#   The following params are sensible defaults for the PX4 project,
+#   if you want to do a changelog before a release you need to update since-tag and future-releases,
+
+# Params:
+#   github_changelog_generator --help for all options
+
+# max-issues
+#   max threshold for github api queries
+#   make sure you set your CHANGELOG_GITHUB_TOKEN before
+#   running
+max-issues=1500
+
+# exclude-tags-regex
+#   excludes release candidates
+exclude-tags-regex=rc[0-9]{1,}|beta[0-9]{1,}
+
+# since-tag
+#   version of last stable release
+#   you need to change this depending on what you need
+#   if you want a changelog between versions this is the lowest version
+since-tag=1.6.5
+
+# future-release
+#   version you are about to release
+#   if you want a changelog between a version and all unreleased changes grouped as a release
+#     eg: v1.6.5 to v1.7.0
+future-release=v1.7.0
+
@@ -8,15 +8,17 @@
 .cproject
 .DS_Store
 .gdbinit
-.gdb_history
 .project
 .settings
 .swp
 .~lock.*
 Testing/
 Packages/*
+s3deploy-branch/
+s3deploy-archive/
 build/*
 build_*/
+core
 cscope.out
 cscope.in.out
 cscope.po.out
@@ -31,11 +33,18 @@ tags
 .pydevproject
 .ropeproject
 *.orig
+src/modules/uORB/topics/*
+src/platforms/nuttx/px4_messages/*
+src/platforms/ros/px4_messages/*
 Firmware.zip
 *.generated.h
 .vagrant
 *.pretty
 xcode
+src/platforms/posix/px4_messages/
+src/platforms/posix-arm/px4_messages/
+src/platforms/qurt/px4_messages/
+ROMFS/*/*/rc.autostart
 rootfs/
 *.autosave
 CMakeLists.txt.user
@@ -51,6 +60,8 @@ GTAGS
 .idea
 cmake-build-*/

+.vscode
+
 posix-configs/SITL/init/test/*_generated

 /airframes.md
@@ -58,54 +69,5 @@ posix-configs/SITL/init/test/*_generated
 /parameters.md
 /parameters.xml
 /modules
-/msg/ros/*.msg

 *.gcov
-.coverage
-.coverage.*
-
-# KDevelop ignores
-.kdev4/*
-*.kdev4
-
-# cmake in tree (ninja)
-.ninja_deps
-.ninja_log
-bin/
-build.ninja
-cmake_install.cmake
-CMakeCache.txt
-CMakeFiles
-compile_commands.json
-CPackConfig.cmake
-CPackSourceConfig.cmake
-CTestTestfile.cmake
-external/
-rules.ninja
-
-# in tree build
-**/*.a
-**/*.px4mod
-**/*.stamp
-/coverage*
-/functional-*
-/generated_params/
-/googletest-*/
-/logs
-/mavsdk_tests
-/unit-*
-/uORB/
-DartConfiguration.tcl
-msg/tmp/
-msg/topics_sources/
-platforms/posix/apps.cpp
-platforms/posix/apps.h
-src/lib/version/build_git_version.h
-src/modules/simulator/simulator_config.h
-src/systemcmds/topic_listener/listener_generated.cpp
-
-!src/drivers/distance_sensor/broadcom/afbrs50/Lib/*
-
-# colcon
-log/
-keys/
@@ -1,91 +1,60 @@
-[submodule "src/modules/mavlink/mavlink"]
-	path = src/modules/mavlink/mavlink
-	url = https://github.com/mavlink/mavlink.git
+[submodule "mavlink/include/mavlink/v2.0"]
+	path = mavlink/include/mavlink/v2.0
+	url = https://github.com/mavlink/c_library_v2.git
 	branch = master
-[submodule "Tools/simulation/jmavsim/jMAVSim"]
-	path = Tools/simulation/jmavsim/jMAVSim
+[submodule "src/modules/uavcan/libuavcan"]
+	path = src/modules/uavcan/libuavcan
+	url = https://github.com/UAVCAN/libuavcan.git
+	branch = master
+[submodule "msg/tools/genmsg"]
+	path = msg/tools/genmsg
+	url = https://github.com/ros/genmsg.git
+	branch = indigo-devel
+[submodule "msg/tools/gencpp"]
+	path = msg/tools/gencpp
+	url = https://github.com/ros/gencpp.git
+	branch = indigo-devel
+[submodule "Tools/jMAVSim"]
+	path = Tools/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
-	branch = main
-[submodule "Tools/simulation/gazebo-classic/sitl_gazebo-classic"]
-	path = Tools/simulation/gazebo-classic/sitl_gazebo-classic
-	url = https://github.com/PX4/PX4-SITL_gazebo-classic.git
-	branch = main
+	branch = master
+[submodule "Tools/sitl_gazebo"]
+	path = Tools/sitl_gazebo
+	url = https://github.com/PX4/sitl_gazebo.git
+	branch = master
+[submodule "src/lib/matrix"]
+	path = src/lib/matrix
+	url = https://github.com/PX4/Matrix.git
+	branch = master
+[submodule "src/lib/DriverFramework"]
+	path = src/lib/DriverFramework
+	url = https://github.com/PX4/DriverFramework.git
+	branch = master
+[submodule "src/lib/ecl"]
+	path = src/lib/ecl
+	url = https://github.com/PX4/ecl.git
+	branch = master
+[submodule "cmake/cmake_hexagon"]
+	path = cmake/cmake_hexagon
+	url = https://github.com/ATLFlight/cmake_hexagon.git
+	branch = master
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
-	url = https://github.com/PX4/PX4-GPSDrivers.git
-	branch = main
+	url = https://github.com/PX4/GpsDrivers.git
+	branch = master
+[submodule "src/modules/micrortps_bridge/micro-CDR"]
+	path = src/modules/micrortps_bridge/micro-CDR
+	url = https://github.com/eProsima/micro-CDR.git
+	branch = master
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
-	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.3.0+
+	url = https://github.com/PX4-NuttX/nuttx.git
+	branch = px4_firmware_nuttx-7.22+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
-	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.3.0+
-[submodule "Tools/flightgear_bridge"]
-	path = Tools/simulation/flightgear/flightgear_bridge
-	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
-[submodule "Tools/simulation/jsbsim/jsbsim_bridge"]
-	path = Tools/simulation/jsbsim/jsbsim_bridge
-	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
-	path = src/drivers/cyphal/libcanard
-	url = https://github.com/opencyphal/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
-	url = https://github.com/PX4/public_regulated_data_types.git
-	branch = legacy
-[submodule "src/lib/crypto/monocypher"]
-	path = src/lib/crypto/monocypher
-	url = https://github.com/PX4/Monocypher.git
-	branch = px4
-[submodule "src/lib/events/libevents"]
-	path = src/lib/events/libevents
-	url = https://github.com/mavlink/libevents.git
-	branch = main
-[submodule "src/lib/crypto/libtomcrypt"]
-	path = src/lib/crypto/libtomcrypt
-	url = https://github.com/PX4/libtomcrypt.git
-	branch = px4
-[submodule "src/lib/crypto/libtommath"]
-	path = src/lib/crypto/libtommath
-	url = https://github.com/PX4/libtommath.git
-	branch = px4
-[submodule "src/modules/uxrce_dds_client/Micro-XRCE-DDS-Client"]
-	path = src/modules/uxrce_dds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/PX4/Micro-XRCE-DDS-Client.git
-	branch = px4
-[submodule "src/lib/cdrstream/cyclonedds"]
-	path = src/lib/cdrstream/cyclonedds
-	url = https://github.com/px4/cyclonedds
-[submodule "src/lib/cdrstream/rosidl"]
-	path = src/lib/cdrstream/rosidl
-	url = https://github.com/px4/rosidl
-[submodule "src/modules/zenoh/zenoh-pico"]
-	path = src/modules/zenoh/zenoh-pico
-	url = https://github.com/px4/zenoh-pico
-	branch = dev/1.0.0-px4
-[submodule "src/lib/heatshrink/heatshrink"]
-	path = src/lib/heatshrink/heatshrink
-	url = https://github.com/PX4/heatshrink.git
-	branch = px4
-[submodule "Tools/simulation/gz"]
-	path = Tools/simulation/gz
-	url = https://github.com/PX4/PX4-gazebo-models.git
-	branch = main
-[submodule "boards/modalai/voxl2/libfc-sensor-api"]
-	path = boards/modalai/voxl2/libfc-sensor-api
-	url = https://gitlab.com/voxl-public/voxl-sdk/core-libs/libfc-sensor-api.git
-[submodule "src/drivers/actuators/vertiq_io/iq-module-communication-cpp"]
-	path = src/drivers/actuators/vertiq_io/iq-module-communication-cpp
-	url = https://github.com/PX4/iq-module-communication-cpp.git
+	url = https://github.com/PX4-NuttX/apps.git
+	branch = px4_firmware_nuttx-7.22+
+[submodule "cmake/configs/uavcan_board_ident"]
+	path = cmake/configs/uavcan_board_ident
+	url = https://github.com/PX4/uavcan_board_ident.git
 	branch = master
-[submodule "src/drivers/uavcan/libdronecan/dsdl"]
-	path = src/drivers/uavcan/libdronecan/dsdl
-	url = https://github.com/PX4/DSDL.git
-[submodule "src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan"]
-	path = src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan
-	url = https://github.com/dronecan/pydronecan
@@ -0,0 +1,62 @@
+# Build and autotest script for PX4 Firmware
+# http://travis-ci.org
+
+sudo: required
+
+services:
+  - docker
+
+language: cpp
+
+git:
+  depth: 2000
+  submodules: false
+
+env:
+  global:
+    # COVERITY_SCAN_TOKEN
+    - secure: "Q4IAcmo1r5cr/UvhcixQa6QN5e5eTcP7FeidzEbX2+BA38yo2BH5O9YQCvZe2AI1Na8ZCjVx3H2luGgDwOKgzAIAjXjZ2KbmXYc6Ns/j/BXScY05dCCzYEhXKD98NZxIKH9lLN9pYDGRA8pChGRJnVlFOr1JHHHnB801+osHy7M="
+    # AWS KEY: $PX4_AWS_KEY
+    - secure: "XknnZHWBbpHbN4f3fuAVwUztdLIu8ej4keC3aQSDofo3uw8AFEzojfsQsN9u77ShWSIV4iYJWh9C9ALkCx7TocJ+xYjiboo10YhM9lH/8u+EXjYWG6GHS8ua0wkir+cViSxoLNaMtmcb/rPTicJecAGANxLsIHyBAgTL3fkbLSA="
+    # AWS SECRET: $PX4_AWS_SECRET
+    - secure: "h6oajlW68dWIr+wZhO58Dv6e68dZHrBLVA6lPXZmheFQBW6Xam1HuLGA0LOW6cL9TnrAsOZ8g4goB58eMQnMEijFZKi3mhRwZhd/Xjq/ZGJOWBUrLoQHZUw2dQk5ja5vmUlKEoQnFZjDuMjx8KfX5ZMNy8A3yssWZtJYHD8c+bk="
+
+matrix:
+  fast_finish: true
+  include:
+    - env: BUILD_TARGET=coverity_scan
+      dist: trusty
+      if: branch = coverity_scan
+  allow_failures:
+    - env: BUILD_TARGET=tests_coverage
+
+cache:
+  ccache: true
+
+before_install:
+  # install dependencies for the coverity build (target and branch), otherwise exit early
+  - if [[ "${TRAVIS_BRANCH}" = "coverity_scan" ]]; then
+      sudo pip install empy jinja2 numpy toml;
+      echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-;
+    fi
+  # use git:// to fetch instead of https://
+  - git config --global url."git://".insteadOf https://
+
+script:
+  - ./Tools/docker_run.sh make ${BUILD_TARGET}
+
+after_success:
+  # upload code coverage
+  - if [ "${TRAVIS_PULL_REQUEST}" = "false" ]; then
+      [ "${BUILD_TARGET}" = "tests_coverage" ] && bash <(curl -s https://codecov.io/bash) -F unittests;
+    fi
+
+addons:
+  coverity_scan:
+    project:
+      name: "PX4/Firmware"
+      description: "Build submitted via Travis CI"
+    notification_email: ci@px4.io
+    build_command_prepend: "make distclean"
+    build_command: "make posix_sitl_default"
+    branch_pattern: coverity_scan
@@ -1,14 +0,0 @@
-.cortex-debug.peripherals.state.json
-.cortex-debug.registers.state.json
-compile_commands.json
-
-# generated by cmake
-launch.json
-c_cpp_properties.json
-
-# C/C++ extension does some local caching in this folder
-ipch/
-
-browse.vc.db*
-
-*.log
@@ -1,5 +0,0 @@
-[
-	{
-		"name": "PX4 detect"
-	}
-]
@@ -1,428 +0,0 @@
-CONFIG:
-  default: px4_sitl_default
-  choices:
-    px4_sitl_default:
-      short: px4_sitl_default
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_default
-    px4_sitl_nolockstep:
-      short: px4_sitl_nolockstep
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_nolockstep
-    px4_sitl_asan:
-      short: px4_sitl (AddressSanitizer)
-      buildType: AddressSanitizer
-      settings:
-        CONFIG: px4_sitl_default
-    px4_sitl_ubsan:
-      short: px4_sitl (UndefinedBehaviorSanitizer)
-      buildType: UndefinedBehaviorSanitizer
-      settings:
-        CONFIG: px4_sitl_default
-    px4_sitl_replay:
-      short: px4_sitl_replay
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_replay
-    px4_sitl_test:
-      short: px4_sitl_test
-      buildType: RelWithDebInfo
-      settings:
-        CONFIG: px4_sitl_test
-    px4_io-v2_default:
-      short: px4_io-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_io-v2_default
-    px4_fmu-v2_default:
-      short: px4_fmu-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v2_default
-    px4_fmu-v3_default:
-      short: px4_fmu-v3
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v3_default
-    px4_fmu-v4_default:
-      short: px4_fmu-v4
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v4_default
-    px4_fmu-v4pro_default:
-      short: px4_fmu-v4pro
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v4pro_default
-    px4_fmu-v5_default:
-      short: px4_fmu-v5
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v5_default
-    px4_fmu-v5_debug:
-      short: px4_fmu-v5_debug
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v5_debug
-    px4_fmu-v5x_default:
-      short: px4_fmu-v5x
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v5x_default
-    px4_fmu-v6c_default:
-      short: px4_fmu-v6c
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_default
-    px4_fmu-v6c_bootloader:
-      short: px4_fmu-v6c_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_bootloader
-    px4_fmu-v6u_default:
-      short: px4_fmu-v6u
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_default
-    px4_fmu-v6u_bootloader:
-      short: px4_fmu-v6u_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_bootloader
-    px4_fmu-v6x_default:
-      short: px4_fmu-v6x
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6x_default
-    px4_fmu-v6x_bootloader:
-      short: px4_fmu-v6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6x_bootloader
-    px4_fmu-v6xrt_default:
-      short: px4_fmu-v6xrt
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6xrt_default
-    px4_fmu-v6xrt_bootloader:
-      short: px4_fmu-v6xrt_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6xrt_bootloader
-    3dr_ctrl-zero-h7-oem-revg_default:
-      short: 3dr_ctrl-zero-h7-oem-revg
-      buildType: MinSizeRel
-      settings:
-        CONFIG: 3dr_ctrl-zero-h7-oem-revg_default
-    airmind_mindpx-v2_default:
-      short: airmind_mindpx-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: airmind_mindpx-v2_default
-    ark_can-flow_default:
-      short: ark_can-flow_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-flow_default
-    ark_can-flow_canbootloader:
-      short: ark_can-flow_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-flow_canbootloader
-    ark_can-flow-mr_canbootloader:
-      short: ark_can-flow-mr_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-flow-mr_canbootloader
-    ark_can-gps_default:
-      short: ark_can-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-gps_default
-    ark_can-gps_canbootloader:
-      short: ark_can-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-gps_canbootloader
-    ark_can-rtk-gps_default:
-      short: ark_can-rtk-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-rtk-gps_default
-    ark_can-rtk-gps_debug:
-      short: ark_can-rtk-gps_debug
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-rtk-gps_debug
-    ark_can-rtk-gps_canbootloader:
-      short: ark_can-rtk-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio-gps_default:
-      short: ark_septentrio-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio-gps_default
-    ark_septentrio-gps_canbootloader:
-      short: ark_septentrio-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio-gps_canbootloader
-    ark_teseo-gps_canbootloader:
-      short: ark_teseo-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_teseo-gps_canbootloader
-    ark_cannode_default:
-      short: ark_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_default
-    ark_cannode_canbootloader:
-      short: ark_cannode_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_canbootloader
-    ark_fmu-v6x_bootloader:
-      short: ark_fmu-v6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_bootloader
-    ark_fmu-v6x_default:
-      short: ark_fmu-v6x_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_default
-    ark_fpv_bootloader:
-      short: ark_fpv_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_bootloader
-    ark_fpv_default:
-      short: ark_fpv_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_default
-    ark_pi6x_bootloader:
-      short: ark_pi6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_pi6x_bootloader
-    ark_pi6x_default:
-      short: ark_pi6x_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_pi6x_default
-    atl_mantis-edu_default:
-      short: atl_mantis-edu
-      buildType: MinSizeRel
-      settings:
-        CONFIG: atl_mantis-edu_default
-    av_x-v1_default:
-      short: av_x-v1
-      buildType: MinSizeRel
-      settings:
-        CONFIG: av_x-v1_default
-    bitcraze_crazyflie_default:
-      short: bitcraze_crazyflie
-      buildType: MinSizeRel
-      settings:
-        CONFIG: bitcraze_crazyflie_default
-    bluerobotics_navigator_default:
-      short: bluerobotics_navigator
-      buildType: MinSizeRel
-      settings:
-        CONFIG: bluerobotics_navigator_default
-    cuav_can-gps-v1_default:
-      short: cuav_can-gps-v1_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_can-gps-v1_default
-    cuav_can-gps-v1_canbootloader:
-      short: cuav_can-gps-v1_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_can-gps-v1_canbootloader
-    cuav_nora_default:
-      short: cuav_nora
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_nora_default
-    cuav_x7pro_default:
-      short: cuav_x7pro
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_x7pro_default
-    cuav_7-nano_default:
-      short: cuav_7-nano
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cuav_7-nano_default
-    cubepilot_cubeorange_test:
-      short: cubepilot_cubeorange
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeorange_test
-    cubepilot_cubeorangeplus_test:
-      short: cubepilot_cubeorangeplus
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeorangeplus_test
-    emlid_navio2_default:
-      short: emlid_navio2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: emlid_navio2_default
-    freefly_can-rtk-gps_default:
-      short: freefly_can-rtk-gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: freefly_can-rtk-gps_default
-    freefly_can-rtk-gps_canbootloader:
-      short: freefly_can-rtk-gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: freefly_can-rtk-gps_canbootloader
-    holybro_can-gps-v1_canbootloader:
-      short: holybro_can-gps-v1_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: holybro_can-gps-v1_canbootloader
-    holybro_can-gps-v1_default:
-      short: holybro_can-gps-v1_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: holybro_can-gps-v1_default
-    holybro_durandal-v1_default:
-      short: holybro_durandal-v1
-      buildType: MinSizeRel
-      settings:
-        CONFIG: holybro_durandal-v1_default
-    matek_h743-slim_default:
-      short: matek_h743-slim
-      buildType: MinSizeRel
-      settings:
-        CONFIG: matek_h743-slim_default
-    matek_gnss-m9n-f4_canbootloader:
-      short: matek_gnss-m9n-f4_canbootloader
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_m9nf4can_canbootloader
-    matek_gnss-m9n-f4_default:
-      short: matek_gnss-m9n-f4_default
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: matek_gnss-m9n-f4_default
-    micoair_h743_bootloader:
-      short: micoair_h743_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743_bootloader
-    micoair_h743_default:
-      short: micoair_h743
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743_default
-    micoair_h743-aio_bootloader:
-      short: micoair_h743-aio_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-aio_bootloader
-    micoair_h743-aio_default:
-      short: micoair_h743-aio
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-aio_default
-    micoair_h743-v2_bootloader:
-      short: micoair_h743-v2_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-v2_bootloader
-    micoair_h743-v2_default:
-      short: micoair_h743-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-v2_default
-    modalai_fc-v1_default:
-      short: modalai_fc-v1
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_fc-v1_default
-    modalai_fc-v2_default:
-      short: modalai_fc-v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_fc-v2_default
-    modalai_voxl2-io_default:
-      short: modalai_voxl2-io
-      buildType: MinSizeRel
-      settings:
-        CONFIG: modalai_voxl2-io_default
-    mro_ctrl-zero-f7_default:
-      short: mro_ctrl-zero-f7
-      buildType: MinSizeRel
-      settings:
-        CONFIG: mro_ctrl-zero-f7_default
-    mro_pixracerpro_bootloader:
-      short: mro_pixracerpro_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: mro_pixracerpro_bootloader
-    mro_pixracerpro_default:
-      short: mro_pixracerpro_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: mro_pixracerpro_default
-    mro_x21-777_default:
-      short: mro_x2.1-777
-      buildType: MinSizeRel
-      settings:
-        CONFIG: mro_x21-777_default
-    nxp_fmuk66-v3_default:
-      short: nxp_fmuk66-v3
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_fmuk66-v3_default
-    nxp_mr-canhubk3_default:
-      short: nxp_mr-canhubk3_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-canhubk3_default
-    nxp_mr-canhubk3_fmu:
-      short: nxp_mr-canhubk3_fmu
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-canhubk3_fmu
-    nxp_tropic-community_default:
-      short: nxp_tropic-community_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_tropic-community_default
-    raspberrypi_pico_default:
-      short: raspberrypi_pico
-      buildType: MinSizeRel
-      settings:
-        CONFIG: raspberrypi_pico_default
-    zeroone_x6_default:
-      short: zeroone_x6
-      buildType: MinSizeRel
-      settings:
-        CONFIG: zeroone_x6_default
-    zeroone_x6_bootloader:
-      short: zeroone_x6_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: zeroone_x6_bootloader
-    x-mav_ap-h743v2_bootloader:
-      short: x-mav_ap-h743v2-boot
-      buildType: MinSizeRel
-      settings:
-        CONFIG: x-mav_ap-h743v2_bootloader
-    x-mav_ap-h743v2_default:
-      short: x-mav_ap-h743v2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: x-mav_ap-h743v2_default
@@ -1,25 +0,0 @@
-{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
-    "recommendations": [
-        "chiehyu.vscode-astyle",
-        "dan-c-underwood.arm",
-        "editorconfig.editorconfig",
-        "fredericbonnet.cmake-test-adapter",
-        "github.vscode-pull-request-github",
-        "marus25.cortex-debug",
-        "ms-azuretools.vscode-docker",
-        "ms-iot.vscode-ros",
-        "ms-python.python",
-        "ms-vscode.cmake-tools",
-        "ms-vscode.cpptools",
-        "ms-vscode.cpptools-extension-pack",
-        "redhat.vscode-yaml",
-        "streetsidesoftware.code-spell-checker",
-        "twxs.cmake",
-        "uavcan.dsdl",
-        "wholroyd.jinja",
-        "zixuanwang.linkerscript",
-        "ms-vscode.makefile-tools"
-    ]
-}
@@ -1,132 +0,0 @@
-{
-        "astyle.astylerc": "${workspaceFolder}/Tools/astyle/astylerc",
-        "astyle.c.enable": true,
-        "astyle.cpp.enable": true,
-        "C_Cpp.autoAddFileAssociations": false,
-        "C_Cpp.clang_format_fallbackStyle": "none",
-        "C_Cpp.default.browse.limitSymbolsToIncludedHeaders": true,
-        "C_Cpp.default.cppStandard": "c++14",
-        "C_Cpp.default.cStandard": "c11",
-        "C_Cpp.formatting": "Disabled",
-        "C_Cpp.intelliSenseEngine": "Default",
-        "C_Cpp.vcpkg.enabled": false,
-        "C_Cpp.workspaceParsingPriority": "low",
-        "cmake.buildBeforeRun": true,
-        "cmake.buildDirectory": "${workspaceFolder}/build/${variant:CONFIG}",
-        "cmake.configureOnOpen": true,
-        "cmake.ctest.parallelJobs": 1,
-        "cmake.options.statusBarVisibility": "compact",
-        "cmake.skipConfigureIfCachePresent": true,
-        "cmakeExplorer.buildDir": "${workspaceFolder}/build/px4_sitl_test",
-        "cmakeExplorer.parallelJobs": 1,
-        "cmakeExplorer.suiteDelimiter": "-",
-        "cSpell.allowCompoundWords": true,
-        "cSpell.diagnosticLevel": "Hint",
-        "cSpell.showStatus": false,
-        "cSpell.words": [
-                "acro",
-                "nuttx",
-                "esc"
-        ],
-        "debug.toolBarLocation": "docked",
-        "editor.defaultFormatter": "chiehyu.vscode-astyle",
-        "editor.insertSpaces": false,
-        "editor.minimap.maxColumn": 120,
-        "editor.minimap.renderCharacters": false,
-        "editor.minimap.showSlider": "always",
-        "editor.suggest.localityBonus": true,
-        "editor.tabSize": 8,
-        "editor.wordWrapColumn": 120,
-        "explorer.openEditors.visible": 0,
-        "files.insertFinalNewline": true,
-        "files.trimTrailingWhitespace": true,
-        "files.watcherExclude": {
-                "**/build/**": true
-        },
-        "git.detectSubmodulesLimit": 20,
-        "git.ignoreLimitWarning": true,
-        "githubPullRequests.defaultMergeMethod": "squash",
-        "githubPullRequests.telemetry.enabled": false,
-        "files.associations": {
-                "*.jinja": "jinja",
-                "algorithm": "cpp",
-                "array": "cpp",
-                "atomic": "cpp",
-                "bitset": "cpp",
-                "cctype": "cpp",
-                "cfenv": "cpp",
-                "chrono": "cpp",
-                "cinttypes": "cpp",
-                "clocale": "cpp",
-                "cmath": "cpp",
-                "codecvt": "cpp",
-                "complex": "cpp",
-                "condition_variable": "cpp",
-                "csignal": "cpp",
-                "cstdarg": "cpp",
-                "cstddef": "cpp",
-                "cstdint": "cpp",
-                "cstdio": "cpp",
-                "cstdlib": "cpp",
-                "cstring": "cpp",
-                "ctime": "cpp",
-                "cwchar": "cpp",
-                "cwctype": "cpp",
-                "deque": "cpp",
-                "exception": "cpp",
-                "forward_list": "cpp",
-                "fstream": "cpp",
-                "functional": "cpp",
-                "future": "cpp",
-                "hash_map": "cpp",
-                "hash_set": "cpp",
-                "initializer_list": "cpp",
-                "iomanip": "cpp",
-                "iosfwd": "cpp",
-                "iostream": "cpp",
-                "istream": "cpp",
-                "iterator": "cpp",
-                "limits": "cpp",
-                "list": "cpp",
-                "map": "cpp",
-                "memory": "cpp",
-                "memory_resource": "cpp",
-                "mutex": "cpp",
-                "new": "cpp",
-                "numeric": "cpp",
-                "optional": "cpp",
-                "ostream": "cpp",
-                "random": "cpp",
-                "ratio": "cpp",
-                "regex": "cpp",
-                "set": "cpp",
-                "sstream": "cpp",
-                "stdexcept": "cpp",
-                "streambuf": "cpp",
-                "string": "cpp",
-                "string_view": "cpp",
-                "strstream": "cpp",
-                "system_error": "cpp",
-                "thread": "cpp",
-                "tuple": "cpp",
-                "type_traits": "cpp",
-                "typeindex": "cpp",
-                "typeinfo": "cpp",
-                "unordered_map": "cpp",
-                "unordered_set": "cpp",
-                "utility": "cpp",
-                "valarray": "cpp",
-                "variant": "cpp",
-                "vector": "cpp",
-                "Jenkinsfile*": "groovy",
-                "*.sdf": "xml"
-        },
-        "search.exclude": {
-                "${workspaceFolder}/build": true
-        },
-        "search.showLineNumbers": true,
-        "terminal.integrated.scrollback": 15000,
-        "yaml.schemas": {
-                "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
-        },
-}
@@ -1,310 +0,0 @@
-{
-    // See https://go.microsoft.com/fwlink/?LinkId=733558
-    // for the documentation about the tasks.json format
-    "version": "2.0.0",
-    "tasks": [
-        {
-            "label": "build",
-            "type": "shell",
-            "command": "/bin/bash",
-            "args": [
-                "-c",
-                "${command:cmake.tasksBuildCommand}"
-            ],
-            "options": {
-                "cwd": "${command:cmake.buildDirectory}"
-            },
-            "group": {
-                "kind": "build",
-                "isDefault": true,
-            },
-            "problemMatcher": {
-                "base": "$gcc",
-                "fileLocation": ["relative", "${command:cmake.buildDirectory}"]
-            },
-            "presentation":{
-                "echo": false,
-                "showReuseMessage": false,
-                "clear": true,
-                "panel": "shared",
-                "group": "build"
-            }
-        },
-        {
-            "label": "test",
-            "type": "shell",
-            "command": "make tests",
-            "options": {
-                "cwd": "${workspaceFolder}"
-            },
-            "group": {
-                "kind": "test",
-                "isDefault": true,
-            },
-            "presentation":{
-                "echo": true,
-                "showReuseMessage": false,
-                "clear": false,
-                "panel": "shared",
-                "group": "test"
-            }
-        },
-        {
-            "label": "jmavsim kill",
-            "type": "shell",
-            "command": "kill $(ps aux | grep jmavsim | grep -v 'grep' | awk '{print $2}') || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
-        },
-        {
-            "label": "gazebo-classic build",
-            "type": "shell",
-            "command": "make px4_sitl_default sitl_gazebo-classic",
-            "options": {
-                "cwd": "${workspaceFolder}"
-            },
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-        },
-        {
-            "label": "gazebo-classic start",
-            "type": "shell",
-            "dependsOn": "gazebo-classic build",
-            "options": {
-                "cwd": "${workspaceFolder}",
-                "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo-classic",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models",
-                    "PX4_SIM_SPEED_FACTOR": "1"
-                }
-            },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/empty.world",
-            "isBackground": true,
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [
-                {
-                    "pattern": [
-                        {
-                            "regexp": ".",
-                            "file": 1,
-                            "location": 2,
-                            "message": 3
-                        }
-                    ],
-                    "background": {
-                        "activeOnStart": true,
-                        "beginsPattern": ".",
-                        "endsPattern": ".",
-                    }
-                }
-            ]
-        },
-        {
-            "label": "gazebo-classic",
-            "type": "shell",
-            "dependsOn": "gazebo-classic start",
-            "options": {
-                "cwd": "${workspaceFolder}",
-                "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo-classic",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models",
-                    "PX4_SIM_SPEED_FACTOR": "1"
-                }
-            },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
-            "isBackground": false,
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [
-                {
-                    "pattern": [
-                        {
-                            "regexp": ".",
-                            "file": 1,
-                            "location": 2,
-                            "message": 3
-                        }
-                    ],
-                    "background": {
-                        "activeOnStart": true,
-                        "beginsPattern": ".",
-                        "endsPattern": ".",
-                    }
-                }
-            ]
-        },
-        {
-            "label": "gazebo",
-            "type": "shell",
-            "options": {
-                "cwd": "${workspaceFolder}",
-                "env": {
-                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/gz/models",
-                }
-            },
-            "command": "gz sim -v 4 -r ${workspaceFolder}/Tools/simulation/gz/worlds/${input:gzWorld}.sdf",
-            "isBackground": true,
-            "presentation": {
-                "echo": true,
-                "reveal": "always",
-                "revealProblems": "onProblem",
-                "focus": true,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": false
-            },
-            "problemMatcher": [],
-            "dependsOn":["gazebo kill"]
-        },
-        {
-            "label": "gazebo-classic kill",
-            "type": "shell",
-            "command": "pkill -9 -f gzserver || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
-        },
-        {
-            "label": "gazebo kill",
-            "type": "shell",
-            "command": "pkill -9 -f 'gz sim' || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_sitl_cleanup"]
-        },
-
-        {
-            "label": "px4_sitl_cleanup",
-            "type": "shell",
-            "command": "rm -rfv /tmp/px4* || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": [],
-            "dependsOn":["px4_kill"]
-        },
-        {
-            "label": "px4_kill",
-            "type": "shell",
-            "command": "pkill -9 px4 || true",
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "revealProblems": "onProblem",
-                "focus": false,
-                "panel": "dedicated",
-                "showReuseMessage": false,
-                "clear": false,
-                "close": true
-            },
-            "problemMatcher": []
-        },
-        {
-            "label": "mavlink shell",
-            "type": "shell",
-            "command": "./Tools/mavlink_shell.py",
-            "options": {
-                "cwd": "${workspaceFolder}"
-            },
-            "presentation": {
-                "echo": true,
-                "reveal": "always",
-                "focus": true,
-                "panel": "new",
-                "showReuseMessage": false,
-                "clear": false
-            },
-            "problemMatcher": []
-        },
-        {
-            "label": "miniterm.py",
-            "type": "shell",
-            "command": "miniterm.py --raw - 57600",
-            "options": {
-                "cwd": "${workspaceFolder}"
-            },
-            "presentation": {
-                "echo": true,
-                "reveal": "always",
-                "focus": true,
-                "panel": "new",
-                "showReuseMessage": false,
-                "clear": false
-            },
-            "problemMatcher": []
-        }
-    ],
-    "inputs": [
-        {
-            "type": "pickString",
-            "id": "gzWorld",
-            "description": "gz world",
-            "options": [
-                "default"
-            ],
-            "default": "default"
-        }
-    ]
-}
@@ -0,0 +1,172 @@
+# This file is NOT licensed under the GPLv3, which is the license for the rest
+# of YouCompleteMe.
+#
+# Here's the license text for this file:
+#
+# This is free and unencumbered software released into the public domain.
+#
+# Anyone is free to copy, modify, publish, use, compile, sell, or
+# distribute this software, either in source code form or as a compiled
+# binary, for any purpose, commercial or non-commercial, and by any
+# means.
+#
+# In jurisdictions that recognize copyright laws, the author or authors
+# of this software dedicate any and all copyright interest in the
+# software to the public domain. We make this dedication for the benefit
+# of the public at large and to the detriment of our heirs and
+# successors. We intend this dedication to be an overt act of
+# relinquishment in perpetuity of all present and future rights to this
+# software under copyright law.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+#
+# For more information, please refer to <http://unlicense.org/>
+
+import os
+import ycm_core
+
+# These are the compilation flags that will be used in case there's no
+# compilation database set (by default, one is not set).
+# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR.
+flags = [
+'-Wall',
+'-Wextra',
+'-Werror',
+#'-Wc++98-compat',
+'-Wno-long-long',
+'-Wno-variadic-macros',
+'-fexceptions',
+'-DNDEBUG',
+# You 100% do NOT need -DUSE_CLANG_COMPLETER in your flags; only the YCM
+# source code needs it.
+#'-DUSE_CLANG_COMPLETER',
+# THIS IS IMPORTANT! Without a "-std=<something>" flag, clang won't know which
+# language to use when compiling headers. So it will guess. Badly. So C++
+# headers will be compiled as C headers. You don't want that so ALWAYS specify
+# a "-std=<something>".
+# For a C project, you would set this to something like 'c99' instead of
+# 'c++11'.
+'-std=c++11',
+# ...and the same thing goes for the magic -x option which specifies the
+# language that the files to be compiled are written in. This is mostly
+# relevant for c++ headers.
+# For a C project, you would set this to 'c' instead of 'c++'.
+'-x',
+'c++',
+'-undef', # get rid of standard definitions to allow us to include arm math header
+'-I', os.path.join(os.path.expanduser("~"),'gcc-arm-none-eabi-4_7-2013q3/arm-none-eabi/include'),
+'-I', 'Build/px4io-v2_default.build/nuttx-export/include/',
+'-I', './NuttX/nuttx/arch/arm/include',
+'-include', './src/include/visibility.h',
+'-I', './src',
+'-I', './src/modules',
+'-I', './src/include',
+'-I', './src/lib',
+'-I', './NuttX',
+]
+
+
+# Set this to the absolute path to the folder (NOT the file!) containing the
+# compile_commands.json file to use that instead of 'flags'. See here for
+# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html
+#
+# Most projects will NOT need to set this to anything; you can just change the
+# 'flags' list of compilation flags. Notice that YCM itself uses that approach.
+compilation_database_folder = ''
+
+if os.path.exists( compilation_database_folder ):
+  database = ycm_core.CompilationDatabase( compilation_database_folder )
+else:
+  database = None
+
+SOURCE_EXTENSIONS = [ '.cpp', '.cxx', '.cc', '.c', '.m', '.mm' ]
+
+def DirectoryOfThisScript():
+  return os.path.dirname( os.path.abspath( __file__ ) )
+
+
+def MakeRelativePathsInFlagsAbsolute( flags, working_directory ):
+  if not working_directory:
+    return list( flags )
+  new_flags = []
+  make_next_absolute = False
+  path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ]
+  for flag in flags:
+    new_flag = flag
+
+    if make_next_absolute:
+      make_next_absolute = False
+      if not flag.startswith( '/' ):
+        new_flag = os.path.join( working_directory, flag )
+
+    for path_flag in path_flags:
+      if flag == path_flag:
+        make_next_absolute = True
+        break
+
+      if flag.startswith( path_flag ):
+        path = flag[ len( path_flag ): ]
+        new_flag = path_flag + os.path.join( working_directory, path )
+        break
+
+    if new_flag:
+      new_flags.append( new_flag )
+  return new_flags
+
+
+def IsHeaderFile( filename ):
+  extension = os.path.splitext( filename )[ 1 ]
+  return extension in [ '.h', '.hxx', '.hpp', '.hh' ]
+
+
+def GetCompilationInfoForFile( filename ):
+  # The compilation_commands.json file generated by CMake does not have entries
+  # for header files. So we do our best by asking the db for flags for a
+  # corresponding source file, if any. If one exists, the flags for that file
+  # should be good enough.
+  if IsHeaderFile( filename ):
+    basename = os.path.splitext( filename )[ 0 ]
+    for extension in SOURCE_EXTENSIONS:
+      replacement_file = basename + extension
+      if os.path.exists( replacement_file ):
+        compilation_info = database.GetCompilationInfoForFile(
+          replacement_file )
+        if compilation_info.compiler_flags_:
+          return compilation_info
+    return None
+  return database.GetCompilationInfoForFile( filename )
+
+
+def FlagsForFile( filename, **kwargs ):
+  if database:
+    # Bear in mind that compilation_info.compiler_flags_ does NOT return a
+    # python list, but a "list-like" StringVec object
+    compilation_info = GetCompilationInfoForFile( filename )
+    if not compilation_info:
+      return None
+
+    final_flags = MakeRelativePathsInFlagsAbsolute(
+      compilation_info.compiler_flags_,
+      compilation_info.compiler_working_dir_ )
+
+    # NOTE: This is just for YouCompleteMe; it's highly likely that your project
+    # does NOT need to remove the stdlib flag. DO NOT USE THIS IN YOUR
+    # ycm_extra_conf IF YOU'RE NOT 100% SURE YOU NEED IT.
+    #try:
+    #  final_flags.remove( '-stdlib=libc++' )
+    #except ValueError:
+    #  pass
+  else:
+    relative_to = DirectoryOfThisScript()
+    final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to )
+
+  return {
+    'flags': final_flags,
+    'do_cache': True
+  }
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2024 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -40,7 +40,7 @@
 # * Common functions should be included in px_base.cmake.
 #
 # * OS/ board specific fucntions should be include in
-#	px_impl_${PX4_PLATFORM}.cmake
+#	px_impl_${OS}.cmake or px4_impl_${OS}_${BOARD}.cmake.
 #
 # Formatting
 # ---------------------------------------------------------------------------
@@ -92,146 +92,68 @@
 # ---------------------------------------------------------------------------
 #
 # * If referencing a string variable, don't put it in quotes.
-#	Don't do "${PX4_PLATFORM}" STREQUAL "posix",
-#	instead type ${PX4_PLATFORM} STREQUAL "posix". This will throw an
-#	error when ${PX4_PLATFORM} is not defined instead of silently
+#	Don't do "${OS}" STREQUAL "posix",
+#	instead type ${OS} STREQUAL "posix". This will throw an
+#	error when ${OS} is not defined instead of silently
 #	evaluating to false.
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.10 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)

-set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
-set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
+set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}")
+set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}")

-list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/cmake)
-include(px4_parse_function_args)
+list(APPEND CMAKE_MODULE_PATH "${PX4_SOURCE_DIR}/cmake")

 #=============================================================================
 # git
 #
-include(px4_git)
+include(common/px4_git)

 execute_process(
-	COMMAND git describe --exclude ext/* --tags --match "v[0-9]*"
-	OUTPUT_VARIABLE PX4_GIT_TAG
+	COMMAND git describe --always --tags
+	OUTPUT_VARIABLE git_tag
 	OUTPUT_STRIP_TRAILING_WHITESPACE
-	RESULTS_VARIABLE GIT_DESCRIBE_RESULT
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	)

-# if proper git tag unavilable default to v0.0.0
-if(NOT ${GIT_DESCRIBE_RESULT} MATCHES "0")
-	set(PX4_GIT_TAG "v0.0.0")
-endif()
-
-message(STATUS "PX4_GIT_TAG: ${PX4_GIT_TAG}")
-
-# git describe to X.Y.Z version
-string(REPLACE "." ";" VERSION_LIST ${PX4_GIT_TAG})
-
-# major version
-list(GET VERSION_LIST 0 PX4_VERSION_MAJOR)
-string(REPLACE "v" "" PX4_VERSION_MAJOR ${PX4_VERSION_MAJOR})
-# minor version
-list(GET VERSION_LIST 1 PX4_VERSION_MINOR)
-# patch version
-list(GET VERSION_LIST 2 PX4_VERSION_PATCH)
-string(REPLACE "-" ";" PX4_VERSION_PATCH ${PX4_VERSION_PATCH})
-list(GET PX4_VERSION_PATCH 0 PX4_VERSION_PATCH)
-
-# # Capture only the hash part after 'g'
-string(REGEX MATCH "g([a-f0-9]+)$" GIT_HASH "${PX4_GIT_TAG}")
-set(PX4_GIT_HASH ${CMAKE_MATCH_1})
-
 define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 BRIEF_DOCS "PX4 module libs"
                 FULL_DOCS "List of all PX4 module libraries"
                 )

-define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
-                 BRIEF_DOCS "PX4 kernel side module libs"
-                 FULL_DOCS "List of all PX4 kernel module libraries"
-                 )
-
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
                 )

-define_property(GLOBAL PROPERTY PX4_SRC_FILES
-                 BRIEF_DOCS "src files from all PX4 modules & libs"
-                 FULL_DOCS "SRC files from px4_add_{module,library}"
-                 )
-
 #=============================================================================
 # configuration
 #

-include(px4_add_module)
-set(config_module_list)
-set(config_kernel_list)
+set(CONFIG "posix_sitl_default" CACHE STRING "desired configuration")

-# Find Python
-find_package(PythonInterp 3)
-# We have a custom error message to tell users how to install python3.
-if(NOT PYTHONINTERP_FOUND)
-	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-		"    macOS: brew install python")
-endif()
+string(REPLACE "_" ";" config_args ${CONFIG})
+list(GET config_args 0 OS)
+list(GET config_args 1 BOARD)
+list(GET config_args 2 LABEL)

-option(PYTHON_COVERAGE "Python code coverage" OFF)
-if(PYTHON_COVERAGE)
-	message(STATUS "python coverage enabled")
-	set(PYTHON_EXECUTABLE coverage run -p)
-endif()
-
-include(px4_config)
-include(kconfig)
-message(STATUS "PX4 config: ${PX4_CONFIG}")
-message(STATUS "PX4 platform: ${PX4_PLATFORM}")
-
-if($ENV{CLION_IDE})
-	# CLion automatically executes some compiler commands after configuring the
-	# project. This would fail on NuttX, as visibility.h tries to (indirectly)
-	# include nuttx/config.h, which at that point does not exist yet
-	add_definitions(-DPX4_DISABLE_GCC_POISON)
-endif()
-
-if(${PX4_PLATFORM} STREQUAL "posix")
-	if(ENABLE_LOCKSTEP_SCHEDULER)
-		add_definitions(-DENABLE_LOCKSTEP_SCHEDULER)
-		message(STATUS "PX4 lockstep: enabled")
-	else()
-		message(STATUS "PX4 lockstep: disabled")
-	endif()
-endif()
-
-# external modules
+set(THREADS "4" CACHE STRING "number of threads to use for external build processes")
+set(DEBUG_PORT "/dev/ttyACM0" CACHE STRING "debugging port")
 set(EXTERNAL_MODULES_LOCATION "" CACHE STRING "External modules source location")

-if(NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
+if (NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
 	get_filename_component(EXTERNAL_MODULES_LOCATION "${EXTERNAL_MODULES_LOCATION}" ABSOLUTE)
 endif()

-set_property(GLOBAL PROPERTY PX4_MODULE_CONFIG_FILES)
-
-include(platforms/${PX4_PLATFORM}/cmake/px4_impl_os.cmake)
-list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake)
-
-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
-	include(init)
-endif()
-
-#=============================================================================
-# project definition
-#
-project(px4 CXX C ASM)
+include(platforms/${OS}/cmake/px4_impl_os.cmake)
+include(configs/${CONFIG})
+list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/platforms/${OS}/cmake)

 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
-if(NOT CMAKE_BUILD_TYPE)
-	if(${PX4_PLATFORM} STREQUAL "nuttx")
+if (NOT CMAKE_BUILD_TYPE)
+	if (${OS} STREQUAL "nuttx")
 		set(PX4_BUILD_TYPE "MinSizeRel")
 	else()
 		set(PX4_BUILD_TYPE "RelWithDebInfo")
@@ -240,78 +162,37 @@ if(NOT CMAKE_BUILD_TYPE)
 	set(CMAKE_BUILD_TYPE ${PX4_BUILD_TYPE} CACHE STRING "Build type" FORCE)
 endif()

-if((CMAKE_BUILD_TYPE STREQUAL "Debug") OR (CMAKE_BUILD_TYPE STREQUAL "Coverage"))
-	set(MAX_CUSTOM_OPT_LEVEL -O0)
-elseif(CMAKE_BUILD_TYPE MATCHES "Sanitizer")
-	set(MAX_CUSTOM_OPT_LEVEL -O1)
-elseif(CMAKE_BUILD_TYPE MATCHES "Release")
-	set(MAX_CUSTOM_OPT_LEVEL -O3)
-else()
-	if(px4_constrained_flash_build)
-		set(MAX_CUSTOM_OPT_LEVEL -Os)
-	else()
-		set(MAX_CUSTOM_OPT_LEVEL -O2)
-	endif()
-endif()
+set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage")

-set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage;AddressSanitizer;UndefinedBehaviorSanitizer")
-message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
+#=============================================================================

-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
+message(STATUS "PX4 VERSION: ${git_tag}")
+message(STATUS "CONFIG: ${CONFIG}")
+message(STATUS "Build Type: ${CMAKE_BUILD_TYPE}")
+
+#=============================================================================
+# project definition
+#
+project(px4 CXX C ASM)

 set(package-contact "px4users@googlegroups.com")

-set(CMAKE_CXX_STANDARD 14)
+set(CMAKE_CXX_STANDARD 11)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
-set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD 99)
 set(CMAKE_C_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
-
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})

 #=============================================================================

-# gold linker - use if available (posix only for now)
-if(${PX4_PLATFORM} STREQUAL "posix")
-	include(CMakeDependentOption)
-	CMAKE_DEPENDENT_OPTION(USE_LD_GOLD
-			"Use GNU gold linker" ON
-			"NOT WIN32;NOT APPLE" OFF
-	)
-
-	if(USE_LD_GOLD)
-		execute_process(COMMAND ${CMAKE_C_COMPILER} -fuse-ld=gold -Wl,--version ERROR_QUIET OUTPUT_VARIABLE LD_VERSION)
-		if("${LD_VERSION}" MATCHES "GNU gold")
-			set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fuse-ld=gold")
-			set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -fuse-ld=gold")
-		else()
-			set(USE_LD_GOLD OFF)
-		endif()
-	endif()
-endif()
-
-#=============================================================================
-
 # Setup install paths
-if(${PX4_PLATFORM} STREQUAL "posix")
-	# This makes it possible to dynamically load code which depends on symbols
-	# inside the px4 executable.
-	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
-	set(CMAKE_ENABLE_EXPORTS ON)
+if (${OS} STREQUAL "posix")

-	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
-		include(coverage)
-	endif()
-
-	include(sanitizers)
+	include(common/coverage)
+	include(common/sanitizers)

 	# Define GNU standard installation directories
 	include(GNUInstallDirs)
@@ -319,43 +200,135 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	if (NOT CMAKE_INSTALL_PREFIX)
 		set(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Install path prefix" FORCE)
 	endif()
-endif()

-include(ccache)
+	# cmake testing only on posix
+	enable_testing()
+	include(CTest)
+endif()

 #=============================================================================
-# get chip and chip manufacturer
+# require px4 module interface
+set(px4_required_interface
+	px4_os_prebuild_targets
+	px4_os_add_flags
+	)
+foreach(cmd ${px4_required_interface})
+	if (NOT COMMAND ${cmd})
+		message(FATAL_ERROR "${CONFIG} must implement ${cmd}")
+	endif()
+endforeach()
+
+set(px4_required_config config_module_list)
+foreach(conf ${px4_required_config})
+	if (NOT DEFINED ${conf})
+		message(FATAL_ERROR "cmake/${CONFIG} must define ${conf}")
+	endif()
+endforeach()
+
+#=============================================================================
+# ccache
 #
-px4_os_determine_build_chip()
-if(NOT PX4_CHIP_MANUFACTURER)
-	message(FATAL_ERROR "px4_os_determine_build_chip() needs to set PX4_CHIP_MANUFACTURER")
+option(CCACHE "Use ccache if available" ON)
+find_program(CCACHE_PROGRAM ccache)
+if (CCACHE AND CCACHE_PROGRAM AND NOT DEFINED ENV{CCACHE_DISABLE})
+	set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_PROGRAM}")
 endif()
-if(NOT PX4_CHIP)
-	message(FATAL_ERROR "px4_os_determine_build_chip() needs to set PX4_CHIP")
+
+#=============================================================================
+# find programs and packages
+#
+
+# see if catkin was invoked to build this
+if (CATKIN_DEVEL_PREFIX)
+	message(STATUS "catkin ENABLED")
+	find_package(catkin REQUIRED)
+	if (catkin_FOUND)
+		catkin_package()
+	else()
+		message(FATAL_ERROR "catkin not found")
+	endif()
 endif()

+find_package(PythonInterp REQUIRED)
+px4_find_python_module(jinja2 REQUIRED)
+
+#=============================================================================
+# check required toolchain variables
+#
+
+set(required_variables CMAKE_C_COMPILER_ID CMAKE_CXX_COMPILER_ID)
+foreach(var ${required_variables})
+	if (NOT ${var})
+		message(FATAL_ERROR "Toolchain/config must define ${var}")
+	endif()
+endforeach()
+
+# print full c compiler version
+execute_process(COMMAND ${CMAKE_C_COMPILER} --version
+		OUTPUT_VARIABLE c_compiler_version
+		OUTPUT_STRIP_TRAILING_WHITESPACE
+		)
+STRING(REGEX MATCH "[^\n]*" c_compiler_version_short ${c_compiler_version})
+message(STATUS "C compiler: ${c_compiler_version_short}")
+
+# print full c++ compiler version
+execute_process(COMMAND ${CMAKE_CXX_COMPILER} --version
+		OUTPUT_VARIABLE cxx_compiler_version
+		OUTPUT_STRIP_TRAILING_WHITESPACE
+		)
+STRING(REGEX MATCH "[^\n]*" cxx_compiler_version_short ${cxx_compiler_version})
+message(STATUS "C++ compiler: ${cxx_compiler_version_short}")
+
+#=============================================================================
+# external libraries
+#
+px4_os_prebuild_targets(OUT prebuild_targets
+	BOARD ${BOARD}
+	THREADS ${THREADS})
+
 #=============================================================================
 # build flags
 #
-include(px4_add_common_flags)
-px4_add_common_flags()
-px4_os_add_flags()
+px4_os_add_flags(
+	BOARD ${BOARD}
+	C_FLAGS c_flags
+	CXX_FLAGS cxx_flags
+	OPTIMIZATION_FLAGS optimization_flags
+	EXE_LINKER_FLAGS exe_linker_flags
+	INCLUDE_DIRS include_dirs
+	LINK_DIRS link_dirs
+	DEFINITIONS definitions)

-#=============================================================================
-# board cmake init (optional)
-#
-if(EXISTS ${PX4_BOARD_DIR}/cmake/init.cmake)
-	include(${PX4_BOARD_DIR}/cmake/init.cmake)
-endif()
+px4_join(OUT CMAKE_EXE_LINKER_FLAGS LIST "${CMAKE_EXE_LINKER_FLAGS};${exe_linker_flags}" GLUE " ")
+px4_join(OUT CMAKE_C_FLAGS LIST "${CMAKE_C_FLAGS};${c_flags};${optimization_flags}" GLUE " ")
+px4_join(OUT CMAKE_CXX_FLAGS LIST "${CMAKE_CXX_FLAGS};${cxx_flags};${optimization_flags}" GLUE " ")

 #=============================================================================
 # message, and airframe generation
 #
-include(px4_metadata)
+include(common/px4_metadata)

 add_subdirectory(msg EXCLUDE_FROM_ALL)

-px4_generate_airframes_xml(BOARD ${PX4_BOARD})
+px4_generate_airframes_xml(BOARD ${BOARD})
+
+#=============================================================================
+# DriverFramework
+#
+px4_add_git_submodule(TARGET git_driverframework PATH "src/lib/DriverFramework")
+add_subdirectory(src/lib/DriverFramework/framework)
+
+# List the DriverFramework drivers
+if (DEFINED config_df_driver_list)
+	message("DF Drivers: ${config_df_driver_list}")
+endif()
+
+set(df_driver_libs)
+foreach(driver ${config_df_driver_list})
+	add_subdirectory(src/lib/DriverFramework/drivers/${driver})
+	list(APPEND df_driver_libs df_${driver})
+	message("Adding DF driver: ${driver}")
+endforeach()

 #=============================================================================
 # external projects
@@ -364,13 +337,11 @@ set(ep_base ${PX4_BINARY_DIR}/external)
 set_property(DIRECTORY PROPERTY EP_BASE ${ep_base})

 # add external project install folders to build
-# add the directories so cmake won't warn
-execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${ep_base})
-execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${ep_base}/Install)
-execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${ep_base}/Install/lib)
 link_directories(${ep_base}/Install/lib)
-execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${ep_base}/Install/include)
 include_directories(${ep_base}/Install/include)
+# add the directories so cmake won't warn
+execute_process(COMMAND cmake -E make_directory ${ep_base}/Install/lib)
+execute_process(COMMAND cmake -E make_directory ${ep_base}/Install/include)

 #=============================================================================
 # external modules
@@ -386,94 +357,45 @@ if (NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
 	endforeach()
 endif()

-#=============================================================================
-# Testing - Automatic unit and integration testing with CTest
-#
-
-# optionally enable cmake testing (supported only on posix)
-option(CMAKE_TESTING "Configure test targets" OFF)
-if(${PX4_CONFIG} STREQUAL "px4_sitl_test")
-	set(CMAKE_TESTING ON)
-endif()
-if(CMAKE_TESTING)
-	include(CTest) # sets BUILD_TESTING variable
-endif()
-
-# enable test filtering to run only specific tests with the ctest -R regex functionality
-set(TESTFILTER "" CACHE STRING "Filter string for ctest to selectively only run specific tests (ctest -R)")
-
-# if testing is enabled download and configure gtest
-list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/cmake/gtest/)
-include(px4_add_gtest)
-if(BUILD_TESTING)
-	include(gtest)
-
-	# Ensure there's no -R without any filter expression since that trips newer ctest versions
-	if(TESTFILTER)
-		set(TESTFILTERARG "-R")
-	else()
-		set(TESTFILTERARG "")
-	endif()
-
-	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test ${TESTFILTERARG} ${TESTFILTER}
-			DEPENDS
-				px4
-				examples__dyn_hello
-			USES_TERMINAL
-			COMMENT "Running tests"
-			WORKING_DIRECTORY ${PX4_BINARY_DIR})
-	set_target_properties(test_results PROPERTIES EXCLUDE_FROM_ALL TRUE)
-endif()
-
-
 #=============================================================================
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
-add_library(kernel_parameters_interface INTERFACE)
-add_library(events_interface INTERFACE)
-add_library(kernel_events_interface INTERFACE)
-
-include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)
-
-add_subdirectory(platforms/${PX4_PLATFORM}/src/px4)
-add_subdirectory(platforms EXCLUDE_FROM_ALL)
-
-if(EXISTS "${PX4_BOARD_DIR}/CMakeLists.txt")
-	add_subdirectory(${PX4_BOARD_DIR})
-endif()
+add_subdirectory(src/platforms/common EXCLUDE_FROM_ALL)
+add_subdirectory(src/modules/systemlib EXCLUDE_FROM_ALL) # TODO: split into libraries in platform layer
+add_subdirectory(src/modules/uORB EXCLUDE_FROM_ALL) # TODO: platform layer
+add_subdirectory(src/drivers/boards EXCLUDE_FROM_ALL)

 foreach(module ${config_module_list})
 	add_subdirectory(src/${module})
 endforeach()

-# add events lib after modules and libs as it needs to know all source files (PX4_SRC_FILES)
-add_subdirectory(src/lib/events EXCLUDE_FROM_ALL)
-# metadata needs PX4_MODULE_CONFIG_FILES
-add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
-
 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
-
-if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-	target_link_libraries(parameters_interface INTERFACE usr_parameters)
-	target_link_libraries(kernel_parameters_interface INTERFACE parameters)
-	target_link_libraries(events_interface INTERFACE usr_events)
-	target_link_libraries(kernel_events_interface INTERFACE events)
-else()
-	target_link_libraries(parameters_interface INTERFACE parameters)
-	target_link_libraries(events_interface INTERFACE events)
-endif()
+target_link_libraries(parameters_interface INTERFACE parameters)

 # firmware added last to generate the builtin for included modules
-add_subdirectory(platforms/${PX4_PLATFORM})
+add_subdirectory(platforms/${OS})
+
+#=============================================================================
+# generate custom target to print for all executable and module cmake targets
+#
+if (all_posix_cmake_targets)
+	list(SORT all_posix_cmake_targets)
+	px4_join(OUT posix_cmake_target_list LIST ${all_posix_cmake_targets} GLUE "\\n")
+	add_custom_target(list_cmake_targets
+		COMMAND sh -c "printf \"${posix_cmake_target_list}\\n\""
+		COMMENT "List of cmake targets that can be matched by PX4_NO_OPTIMIZATION:"
+		VERBATIM
+		)
+endif()
+

 #=============================================================================
 # uORB graph generation: add a custom target 'uorb_graph'
 #
-set(uorb_graph_config ${PX4_BOARD})
+set(uorb_graph_config ${BOARD})

 set(graph_module_list "")
 foreach(module ${config_module_list})
@@ -482,31 +404,70 @@ endforeach()

 add_custom_command(OUTPUT ${uorb_graph_config}
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
-		${graph_module_list} --src-path src/lib
-		--merge-depends
+		${module_list}
 		--exclude-path src/examples
-		--exclude-path src/lib/parameters # FIXME: enable & fix
 		--file ${PX4_SOURCE_DIR}/Tools/uorb_graph/graph_${uorb_graph_config}
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	COMMENT "Generating uORB graph"
 )
 add_custom_target(uorb_graph DEPENDS ${uorb_graph_config})

+#=============================================================================
+# Doxygen
+#
+option(BUILD_DOXYGEN "Build doxygen documentation" OFF)

-include(bloaty)
+if (BUILD_DOXYGEN)
+	find_package(Doxygen)
+	if (DOXYGEN_FOUND)
+	    # set input and output files
+	    set(DOXYGEN_IN ${CMAKE_SOURCE_DIR}/Documentation/Doxyfile.in)
+	    set(DOXYGEN_OUT ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile)

+	    # request to configure the file
+	    configure_file(${DOXYGEN_IN} ${DOXYGEN_OUT} @ONLY)

-include(doxygen)
-include(metadata)
-include(package)
+	    # note the option ALL which allows to build the docs together with the application
+	    add_custom_target(doxygen ALL
+	        COMMAND ${DOXYGEN_EXECUTABLE} ${DOXYGEN_OUT}
+	        WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+			COMMENT "Generating documentation with Doxygen"
+			DEPENDS uorb_msgs parameters
+			VERBATIM
+			USES_TERMINAL
+			)

-# install python requirements using configured python
-add_custom_target(install_python_requirements
-	COMMAND ${PYTHON_EXECUTABLE} -m pip install --break-system-packages --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
-	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
-	USES_TERMINAL
-)
-
-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
-	include(finalize)
+	else()
+		message("Doxygen needs to be installed to generate documentation")
+	endif()
 endif()
+
+#=============================================================================
+# packaging
+#
+# Important to having packaging at end of cmake file.
+#
+set(CPACK_PACKAGE_NAME ${PROJECT_NAME}-${CONFIG})
+set(CPACK_PACKAGE_VERSION ${git_version})
+set(CPACK_PACKAGE_CONTACT ${package-contact})
+set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
+set(CPACK_DEBIAN_PACKAGE_SECTION "devel")
+set(CPACK_DEBIAN_PACKAGE_PRIORITY "optional")
+set(CPACK_DEBIAN_PACKAGE_DESCRIPTION "The PX4 Pro autopilot.")
+set(CPACK_PACKAGE_FILE_NAME "${PROJECT_NAME}-${CONFIG}-${git_tag}")
+set(CPACK_SOURCE_PACKAGE_FILE_NAME "${PROJECT_NAME}-${git_version}")
+set(CPACK_SOURCE_GENERATOR "ZIP;TBZ2")
+set(CPACK_PACKAGING_INSTALL_PREFIX "")
+set(CPACK_SET_DESTDIR "OFF")
+
+if ("${CMAKE_SYSTEM}" MATCHES "Linux")
+	set(CPACK_GENERATOR "TBZ2")
+	find_program(DPKG_PROGRAM dpkg)
+	if (EXISTS ${DPKG_PROGRAM})
+		list (APPEND CPACK_GENERATOR "DEB")
+	endif()
+else()
+	set(CPACK_GENERATOR "ZIP")
+endif()
+
+include(CPack)
@@ -8,7 +8,7 @@ First [fork and clone](https://help.github.com/articles/fork-a-repo) the project

 ### Create a feature branch

-*Always* branch off main for new features.
+*Always* branch off master for new features.

 ```
 git checkout -b mydescriptivebranchname
@@ -16,7 +16,7 @@ git checkout -b mydescriptivebranchname

 ### Edit and build the code

-The [developer guide](https://docs.px4.io/main/en/development/development.html) explains how to set up the development environment on Mac OS, Linux or Windows. Please take note of our [coding style](https://docs.px4.io/main/en/contribute/code.html) when editing files.
+The [developer guide](http://dev.px4.io/) explains how to set up the development environment on Mac OS, Linux or Windows. Please take note of our [coding style](http://px4.io/dev/code_style) when editing files.

 ### Commit your changes

@@ -41,4 +41,4 @@ Since we care about safety, we will regularly ask you for test results. Best is

 Push changes to your repo and send a [pull request](https://github.com/PX4/Firmware/compare/).

-Make sure to provide some testing feedback and if possible the link to a flight log file. Upload flight log files to [Flight Review](http://logs.px4.io) and link the resulting report.
+MuncherMake sure to provide some testing feedback and if possible the link to a flight log file. Upload flight log files to [Flight Review](http://logs.px4.io) and link the resulting report.
@@ -0,0 +1,83 @@
+{
+	"folders":
+	[
+		{
+			"path": ".",
+			"file_exclude_patterns":
+			[
+				"*.o",
+				"*.a",
+				"*.d",
+				".built",
+				".context",
+				".depend",
+				".config",
+				".version",
+				"Make.dep",
+				".configured",
+				"*.sublime-project",
+				"*.sublime-workspace",
+				".project",
+				".cproject",
+				"cscope.out"
+			],
+			"folder_exclude_patterns":
+			[
+				".settings",
+				"nuttx/arch/arm/src/board",
+				"nuttx/arch/arm/src/chip",
+				"build_*"
+			]
+		}
+	],
+	"settings":
+	{
+		"tab_size": 8,
+		"translate_tabs_to_spaces": false,
+		"highlight_line": true,
+		"AStyleFormatter":
+		{
+			"options_c":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			},
+			"options_c++":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			}
+		}
+	},
+	"build_systems":
+	[
+		{
+			"name": "PX4: make all",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload px4fmu-v2_default -j8"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make posix",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make posix"],
+			"shell": true
+		},
+		{
+			"name": "MindPX_V2: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload mindpx-v2_default -j8"],
+			"shell": true
+		}
+	]
+}
@@ -1,213 +0,0 @@
-# PX4 Firmware Configuration
-
-
-mainmenu "PX4 Firmware Configuration"
-
-comment "Vendor: $(VENDOR)"
-comment "Model: $(MODEL)"
-comment "Label: $(LABEL)"
-
-menu "Toolchain"
-    choice
-        prompt "Platform"
-        default PLATFORM_NUTTX
-        config PLATFORM_NUTTX
-            bool "nuttx"
-        config PLATFORM_POSIX
-            bool "posix"
-        config PLATFORM_QURT
-            bool "qurt"
-        config PLATFORM_ROS2
-            bool "ros2"
-    endchoice
-
-    config BOARD_PLATFORM
-        string
-        default "nuttx" if PLATFORM_NUTTX
-        default "posix" if PLATFORM_POSIX
-        default "qurt" if PLATFORM_QURT
-        default "ros2" if PLATFORM_ROS2
-
-    config BOARD_LOCKSTEP
-        bool "Force enable lockstep"
-        depends on PLATFORM_POSIX
-        help
-            forces lockstep behaviour, despite REPLAY env variable
-
-    config BOARD_NOLOCKSTEP
-        bool "Force disable lockstep"
-        depends on PLATFORM_POSIX
-        help
-            forces nolockstep behaviour, despite REPLAY env variable
-
-    config BOARD_LINUX_TARGET
-        bool "Linux OS Target"
-        depends on PLATFORM_POSIX
-        help
-            Board Platform is running the Linux operating system
-
-    config BOARD_TOOLCHAIN
-        string "Toolchain"
-        default ""
-
-    config BOARD_ARCHITECTURE
-        string "Architecture"
-        default ""
-
-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
-    config BOARD_FULL_OPTIMIZATION
-        bool "Full optmization (O3)"
-        default n
-        help
-            Enables Cmake Release for -O3 optimization
-
-    config BOARD_ROMFSROOT
-        string "ROMFSROOT"
-        default "px4fmu_common"
-        help
-            relative path to the ROMFS root directory
-
-    config BOARD_IO
-        string "IO board name"
-        default "px4_io-v2_default"
-        depends on DRIVERS_PX4IO
-        help
-            name of IO board to be built and included in the ROMFS (requires a valid ROMFSROOT)
-
-    config BOARD_CONSTRAINED_FLASH
-        bool "Contrained flash"
-        help
-            flag to enable constrained flash options (eg limit init script status text)
-
-    config BOARD_NO_HELP
-        bool "No help"
-        help
-            optional condition flag to disable help text on constrained flash systems
-
-    config BOARD_CONSTRAINED_MEMORY
-        bool "Contrained memory"
-        help
-            flag to enable constrained memory options (eg limit maximum number of uORB publications)
-
-    config BOARD_EXTERNAL_METADATA
-        bool "External metadata"
-        help
-            flag to exclude metadata to reduce flash
-
-    config BOARD_LINKER_PREFIX
-        string "linker prefix"
-        help
-            optional to prefix on the Linker script.
-
-    config BOARD_COMPILE_DEFINITIONS
-        string "add custom compile definitions"
-        help
-            add custom compile defitions to this specific target
-endmenu #Toolchain
-
-config BOARD_TESTING
-    bool "Testing"
-    select SYSTEMCMDS_TESTS
-    help
-        flag to enable automatic inclusion of PX4 testing modules
-
-
-config BOARD_ETHERNET
-    bool "Ethernet"
-    help
-        flag to indicate that ethernet is enabled
-
-config BOARD_CRYPTO
-    bool "Crypto support"
-    help
-        Enable PX4 Crypto Support. Select the implementation under drivers
-
-config BOARD_PROTECTED
-    bool "Memory protection"
-    help
-        Enable memory protection via MPU/MMU
-
-menu "Serial ports"
-
-    config BOARD_SERIAL_URT6
-        string "URT6 tty port"
-
-    config BOARD_SERIAL_GPS1
-        string "GPS1 tty port"
-
-    config BOARD_SERIAL_GPS2
-        string "GPS2 tty port"
-
-    config BOARD_SERIAL_GPS3
-        string "GPS3 tty port"
-
-    config BOARD_SERIAL_GPS4
-        string "GPS4 tty port"
-
-    config BOARD_SERIAL_GPS5
-        string "GPS5 tty port"
-
-    config BOARD_SERIAL_TEL1
-        string "TEL1 tty port"
-
-    config BOARD_SERIAL_TEL2
-        string "TEL2 tty port"
-
-    config BOARD_SERIAL_TEL3
-        string "TEL3 tty port"
-
-    config BOARD_SERIAL_TEL4
-        string "TEL4 tty port"
-
-    config BOARD_SERIAL_TEL5
-        string "TEL5 tty port"
-
-    config BOARD_SERIAL_RC
-        string "RC tty port"
-
-    config BOARD_SERIAL_WIFI
-        string "WIFI tty port"
-
-    config BOARD_SERIAL_EXT2
-        string "EXT2 tty port"
-endmenu
-
-menu "File paths"
-
-    config BOARD_ROOT_PATH
-        string "PX4 Root file path"
-        default "/fs/microsd"
-
-    config BOARD_PARAM_FILE
-        string "Parameter file"
-        default "/fs/mtd_params"
-endmenu
-
-menu "drivers"
-source "src/drivers/Kconfig"
-endmenu
-
-menu "modules"
-source "src/modules/Kconfig"
-endmenu
-
-menu "systemcmds"
-source "src/systemcmds/Kconfig"
-endmenu
-
-menu "examples"
-source "src/examples/Kconfig"
-endmenu
-
-menu "platforms"
-depends on PLATFORM_QURT || PLATFORM_POSIX
-source "platforms/common/Kconfig"
-endmenu
-
-source "src/lib/*/Kconfig"
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2012 - 2023, PX4 Development Team
+Copyright (c) 2012 - 2018, PX4 Development Team
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -1,42 +0,0 @@
-Maintainers
-===========
-
-See [the documentation on Maintainers](https://docs.px4.io/main/en/contribute/maintainers.html) to learn about the role of the maintainers and the process to become one.
-
-**Active Maintainers**
-
-| Name                    | Sector | GitHub | Chat | email
-|-------------------------|--------|--------|------|----------------
-| Lorenz Meier | Founder | [LorenzMeier][LorenzMeier] |  | <lorenz@px4.io>
-| Daniel Agar | Architecture | [dagar][dagar] | daniel_agar | <daniel@agar.ca>
-| Beat Küng | Architecture | [bkueng][bkueng] | beatkueng | <beat-kueng@gmx.net>
-| Ramón Roche | CI / Testing | [mrpollo][mrpollo] | rroche | <rroche@linuxfoundation.org>
-| Mathieu Bresciani | State Estimation | [bresch][bresch] | mbresch |
-| Paul Riseborough | State Estimation | [priseborough][priseborough] |  |
-| David Sidrane | RTOS / NuttX | [davids5][davids5] | david_s5 | <David.Sidrane@Nscdg.com>
-| Jayoung Lim | Simulation | [Jaeyoung-Lim][Jaeyoung-Lim] | jaeyounglim. | <jalim@ethz.ch>
-| Beniamino Pozzan | ROS 2 | [beniaminopozzan][beniaminopozzan] | beniaminopozzan | <beniamino.pozzan@gmail.com>
-| Matthias Grob | Multirotor | [MaEtUgR][MaEtUgR] | maetugr |
-| Silvan Fuhrer | Fixed-Wing / VTOL | [sfuhrer][sfuhrer] | sfuhrer |
-| Christian Friedrich | Rover | [chfriedrich98][chfriedrich98] | christian982564 |
-| Pedro Roque | Spacecraft | [Pedro-Roque][Pedro-Roque] | .pedroroque | <padr@kth.se>
-
-
-**Documentation Maintainers**
-
-| Name | GitHub | Chat | email
-|------|--------|------|----------------------
-| Hamish Willee  | [hamishwillee][hamishwillee] | hamishwillee |
-
-**Release Managers**
-
-| Name | GitHub | Chat | email
-|------|--------|------|----------------------
-| Ramón Roche | [mrpollo][mrpollo] | rroche | <rroche@linuxfoundation.org>
-| Daniel Agar | [dagar][dagar] | daniel_agar | <daniel@agar.ca>
-
-**Retired Maintainers**
-
-| Name | GitHub | Chat | email
-|------|--------|------|----------------------
-|  |  |  |
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2015 - 2024 PX4 Development Team. All rights reserved.
+# Copyright (c) 2015 - 2017 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -48,23 +48,16 @@ endif
 #
 # Example usage:
 #
-# make px4_fmu-v2_default 			(builds)
-# make px4_fmu-v2_default upload 	(builds and uploads)
-# make px4_fmu-v2_default test 		(builds and tests)
+# make px4fmu-v2_default 			(builds)
+# make px4fmu-v2_default upload 	(builds and uploads)
+# make px4fmu-v2_default test 		(builds and tests)
 #
-# This tells cmake to build the nuttx px4_fmu-v2 default config in the
-# directory build/px4_fmu-v2_default and then call make
+# This tells cmake to build the nuttx px4fmu-v2 default config in the
+# directory build/nuttx_px4fmu-v2_default and then call make
 # in that directory with the target upload.

-# explicity set default build target
-all: px4_sitl_default
-
-# define a space character to be able to explicitly find it in strings
-space := $(subst ,, )
-
-define make_list
-     $(shell [ -f .github/workflows/compile_${1}.yml ] && cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
-endef
+#  explicity set default build target
+all: posix_sitl_default

 # Parsing
 # --------------------------------------------------------------------
@@ -73,14 +66,7 @@ endef
 # by cmake in the subdirectory
 FIRST_ARG := $(firstword $(MAKECMDGOALS))
 ARGS := $(wordlist 2,$(words $(MAKECMDGOALS)),$(MAKECMDGOALS))
-
-# Get -j or --jobs argument as suggested in:
-# https://stackoverflow.com/a/33616144/8548472
-MAKE_PID := $(shell echo $$PPID)
-j := $(shell ps T | sed -n 's|.*$(MAKE_PID).*$(MAKE).* \(-j\|--jobs\) *\([0-9][0-9]*\).*|\2|p')
-
-# Default j for clang-tidy
-j_clang_tidy := $(or $(j),4)
+j ?= 4

 NINJA_BIN := ninja
 ifndef NO_NINJA_BUILD
@@ -101,11 +87,6 @@ ifdef NINJA_BUILD
 	else
 		PX4_MAKE_ARGS :=
 	endif
-
-	# Only override ninja default if -j is set.
-	ifneq ($(j),)
-		PX4_MAKE_ARGS := $(PX4_MAKE_ARGS) -j$(j)
-	endif
 else
 	ifdef SYSTEMROOT
 		# Windows
@@ -113,14 +94,11 @@ else
 	else
 		PX4_CMAKE_GENERATOR := "Unix\ Makefiles"
 	endif
-
-	# For non-ninja builds we default to -j4
-	j := $(or $(j),4)
 	PX4_MAKE = $(MAKE)
 	PX4_MAKE_ARGS = -j$(j) --no-print-directory
 endif

-SRC_DIR := $(shell dirname "$(realpath $(lastword $(MAKEFILE_LIST)))")
+SRC_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))

 # check if replay env variable is set & set build dir accordingly
 ifdef replay
@@ -129,83 +107,24 @@ else
 	BUILD_DIR_SUFFIX :=
 endif

-CMAKE_ARGS ?=
-
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
-	override CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
+	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
 endif

 ifdef PX4_CMAKE_BUILD_TYPE
-	override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
-else
-
-	# Address Sanitizer
-	ifdef PX4_ASAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
-	endif
-
-	# Memory Sanitizer
-	ifdef PX4_MSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
-	endif
-
-	# Thread Sanitizer
-	ifdef PX4_TSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
-	endif
-
-	# Undefined Behavior Sanitizer
-	ifdef PX4_UBSAN
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
-	endif
-
-	# Fuzz Testing
-	ifdef PX4_FUZZ
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
-	endif
-
-endif
-
-# Pick up specific Python path if set
-ifdef PYTHON_EXECUTABLE
-	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
+	CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
 endif

 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
 define cmake-build
-	$(eval override CMAKE_ARGS += -DCONFIG=$(1))
-	@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
-	@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
-	@$(call cmake-cache-check)
-	@# make sure to start from scratch when switching from GNU Make to Ninja
-	@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ -e $(BUILD_DIR)/Makefile ]; then rm -rf $(BUILD_DIR); fi
-	@# make sure to start from scratch if ninja build file is missing
-	@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ ! -f $(BUILD_DIR)/build.ninja ]; then rm -rf $(BUILD_DIR); fi
-	@# only excplicitly configure the first build, if cache file already exists the makefile will rerun cmake automatically if necessary
-	@if [ ! -e $(BUILD_DIR)/CMakeCache.txt ] || [ $(CMAKE_CACHE_CHECK) ]; then \
-		mkdir -p $(BUILD_DIR) \
-		&& cd $(BUILD_DIR) \
-		&& cmake "$(SRC_DIR)" -G"$(PX4_CMAKE_GENERATOR)" $(CMAKE_ARGS) \
-		|| (rm -rf $(BUILD_DIR)); \
-	fi
-	@# run the build for the specified target
-	@cmake --build $(BUILD_DIR) -- $(PX4_MAKE_ARGS) $(ARGS)
-endef
-
-# check if the options we want to build with in CMAKE_ARGS match the ones which are already configured in the cache inside BUILD_DIR
-define cmake-cache-check
-	@# change to build folder which fails if it doesn't exist and CACHED_CMAKE_OPTIONS stays empty
-	@# fetch all previously configured and cached options from the build folder and transform them into the OPTION=VALUE format without type (e.g. :BOOL)
-	@$(eval CACHED_CMAKE_OPTIONS = $(shell cd $(BUILD_DIR) 2>/dev/null && cmake -L 2>/dev/null | sed -n 's|\([^[:blank:]]*\):[^[:blank:]]*\(=[^[:blank:]]*\)|\1\2|gp' ))
-	@# transform the options in CMAKE_ARGS into the OPTION=VALUE format without -D
-	@$(eval DESIRED_CMAKE_OPTIONS = $(shell echo $(CMAKE_ARGS) | sed -n 's|-D\([^[:blank:]]*=[^[:blank:]]*\)|\1|gp' ))
-	@# find each currently desired option in the already cached ones making sure the complete configured string value is the same
-	@$(eval VERIFIED_CMAKE_OPTIONS = $(foreach option,$(DESIRED_CMAKE_OPTIONS),$(strip $(findstring $(option)$(space),$(CACHED_CMAKE_OPTIONS)))))
-	@# if the complete list of desired options is found in the list of verified options we don't need to reconfigure and CMAKE_CACHE_CHECK stays empty
-	@$(eval CMAKE_CACHE_CHECK = $(if $(findstring $(DESIRED_CMAKE_OPTIONS),$(VERIFIED_CMAKE_OPTIONS)),,y))
+@$(eval PX4_CONFIG = $(1))
+@$(eval BUILD_DIR = $(SRC_DIR)/build/$(PX4_CONFIG)$(BUILD_DIR_SUFFIX))
+@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ -e $(BUILD_DIR)/Makefile ]; then rm -rf $(BUILD_DIR); fi
+@if [ ! -e $(BUILD_DIR)/CMakeCache.txt ]; then mkdir -p $(BUILD_DIR) && cd $(BUILD_DIR) && cmake $(SRC_DIR) -G"$(PX4_CMAKE_GENERATOR)" $(CMAKE_ARGS) -DCONFIG=$(PX4_CONFIG) || (rm -rf $(BUILD_DIR)); fi
+@$(PX4_MAKE) -C $(BUILD_DIR) $(PX4_MAKE_ARGS) $(ARGS)
 endef

 COLOR_BLUE = \033[0;94m
@@ -215,8 +134,10 @@ define colorecho
 +@echo -e '${COLOR_BLUE}${1} ${NO_COLOR}'
 endef

-# Get a list of all config targets boards/*/*.px4board
-ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4board' -print | sed -e 's|boards\/||' | sed -e 's|\.px4board||' | sed -e 's|\/|_|g' | sort)
+# Get a list of all config targets cmake/configs/*.cmake
+ALL_CONFIG_TARGETS := $(basename $(shell find "$(SRC_DIR)/cmake/configs" -maxdepth 1 ! -name '*_common*' ! -name '*_sdflight_*' -name '*.cmake' -print | sed  -e 's:^.*/::' | sort))
+# Strip off leading nuttx_
+NUTTX_CONFIG_TARGETS := $(patsubst nuttx_%,%,$(filter nuttx_%,$(ALL_CONFIG_TARGETS)))

 # ADD CONFIGS HERE
 # --------------------------------------------------------------------
@@ -224,64 +145,90 @@ ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4bo

 # All targets.
 $(ALL_CONFIG_TARGETS):
-	@$(call cmake-build,$@$(BUILD_DIR_SUFFIX))
+	$(call cmake-build,$@)

-# Filter for only default targets to allow omiting the "_default" postfix
-CONFIG_TARGETS_DEFAULT := $(patsubst %_default,%,$(filter %_default,$(ALL_CONFIG_TARGETS)))
-$(CONFIG_TARGETS_DEFAULT):
-	@$(call cmake-build,$@_default$(BUILD_DIR_SUFFIX))
+# Abbreviated config targets.

-all_config_targets: $(ALL_CONFIG_TARGETS)
-all_default_targets: $(CONFIG_TARGETS_DEFAULT)
+# nuttx_ is left off by default; provide a rule to allow that.
+$(NUTTX_CONFIG_TARGETS):
+	$(call cmake-build,nuttx_$@)

-updateconfig:
-	@./Tools/kconfig/updateconfig.py
+all_nuttx_targets: $(NUTTX_CONFIG_TARGETS)

-# board reorganization deprecation warnings (2018-11-22)
-define deprecation_warning
-	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
-endef
+posix: posix_sitl_default
+broadcast: posix_sitl_broadcast

 # All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
-.PHONY: all px4_sitl_default all_config_targets all_default_targets
+.PHONY: all posix broadcast all_nuttx_targets
+
+# Multi- config targets.
+eagle_default: posix_eagle_default qurt_eagle_default
+eagle_rtps: posix_eagle_rtps qurt_eagle_default
+eagle_legacy_default: posix_eagle_legacy qurt_eagle_legacy
+excelsior_default: posix_excelsior_default qurt_excelsior_default
+excelsior_rtps: posix_excelsior_rtps qurt_excelsior_default
+excelsior_legacy_default: posix_excelsior_legacy qurt_excelsior_legacy
+
+.PHONY: eagle_default eagle_rtps eagle_legacy_default
+.PHONY: excelsior_default excelsior_rtps excelsior_legacy_default

 # Other targets
 # --------------------------------------------------------------------

-.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware
+.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware alt_firmware check_rtps

 # QGroundControl flashable NuttX firmware
 qgc_firmware: px4fmu_firmware misc_qgc_extra_firmware

 # px4fmu NuttX firmware
 px4fmu_firmware: \
-	check_px4_io-v2_default \
-	check_px4_fmu-v2_default \
-	check_px4_fmu-v3_default \
-	check_px4_fmu-v4_default \
-	check_px4_fmu-v4pro_default \
-	check_px4_fmu-v5_default \
-	check_px4_fmu-v5x_default \
+	check_px4io-v2_default \
+	check_px4fmu-v2_default \
+	check_px4fmu-v3_default \
+	check_px4fmu-v4_default \
+	check_px4fmu-v4pro_default \
+	check_px4fmu-v5_default \
 	sizes

 misc_qgc_extra_firmware: \
-	check_nxp_fmuk66-v3_default \
-	check_mro_x21_default \
-	check_bitcraze_crazyflie_default \
-	check_bitcraze_crazyflie21_default \
-	check_airmind_mindpx-v2_default \
+	check_aerocore2_default \
+	check_aerofc-v1_default \
+	check_auav-x21_default \
+	check_crazyflie_default \
+	check_mindpx-v2_default \
+	check_px4fmu-v2_lpe \
+	check_tap-v1_default \
 	sizes

-.PHONY: sizes check quick_check uorb_graphs
+# Other NuttX firmware
+alt_firmware: \
+	check_nxphlite-v3_default \
+	check_px4-same70xplained-v1_default \
+	check_px4-stm32f4discovery_default \
+	check_px4cannode-v1_default \
+	check_px4esc-v1_default \
+	check_px4nucleoF767ZI-v1_default \
+	check_s2740vc-v1_default \
+	sizes
+
+# builds with RTPS
+check_rtps: \
+	check_px4fmu-v3_rtps \
+	check_px4fmu-v4_rtps \
+	check_px4fmu-v4pro_rtps \
+	check_posix_sitl_rtps \
+	sizes
+
+.PHONY: sizes check quick_check check_rtps uorb_graphs

 sizes:
 	@-find build -name *.elf -type f | xargs size 2> /dev/null || :

 # All default targets that don't require a special build environment
-check: check_px4_sitl_default px4fmu_firmware misc_qgc_extra_firmware tests check_format
+check: check_posix_sitl_default px4fmu_firmware misc_qgc_extra_firmware alt_firmware tests check_format

-# quick_check builds a single nuttx and SITL target, runs testing, and checks the style
-quick_check: check_px4_sitl_test check_px4_fmu-v5_default tests check_format
+# quick_check builds a single nuttx and posix target, runs testing, and checks the style
+quick_check: check_posix_sitl_default check_px4fmu-v4pro_default tests check_format

 check_%:
 	@echo
@@ -289,311 +236,168 @@ check_%:
 	@$(MAKE) --no-print-directory $(subst check_,,$@)
 	@echo

-all_variants_%:
-	@echo 'Building all $(subst all_variants_,,$@) variants:'  $(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS))
-	@echo
-	$(foreach a,$(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS)), $(call cmake-build,$(a)$(BUILD_DIR_SUFFIX)))
-
 uorb_graphs:
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --merge-depends --file Tools/uorb_graph/graph_full
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --exclude-path src/modules/mavlink --merge-depends --file Tools/uorb_graph/graph_full_no_mavlink
-	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
-	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
-	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
-	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
+	@./Tools/uorb_graph/create_from_startupscript.sh
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --file Tools/uorb_graph/graph_full
+	@$(MAKE) --no-print-directory px4fmu-v2_default uorb_graph
+	@$(MAKE) --no-print-directory px4fmu-v4_default uorb_graph
+	@$(MAKE) --no-print-directory posix_sitl_default uorb_graph

-px4io_update:
-	@$(MAKE) --no-print-directory px4_io-v2_default
-	@$(MAKE) --no-print-directory cubepilot_io-v2_default
-	# px4_io-v2_default
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/ark/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21-777/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v2/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v3/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v4pro/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
-	# cubepilot_io-v2_default
-	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
-	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
-	git status
-
-bootloaders_update: \
-	3dr_ctrl-zero-h7-oem-revg_bootloader \
-	ark_fmu-v6x_bootloader \
-	ark_fpv_bootloader \
-	ark_pi6x_bootloader \
-	cuav_nora_bootloader \
-	cuav_x7pro_bootloader \
-	cuav_7-nano_bootloader \
-	cubepilot_cubeorange_bootloader \
-	cubepilot_cubeorangeplus_bootloader \
-	hkust_nxt-dual_bootloader \
-	hkust_nxt-v1_bootloader \
-	holybro_durandal-v1_bootloader \
-	holybro_kakuteh7_bootloader \
-	holybro_kakuteh7mini_bootloader \
-	holybro_kakuteh7v2_bootloader \
-	matek_h743_bootloader \
-	matek_h743-mini_bootloader \
-	matek_h743-slim_bootloader \
-        micoair_h743_bootloader \
-        micoair_h743-aio_bootloader \
-	micoair_h743-v2_bootloader \
-	modalai_fc-v2_bootloader \
-	mro_ctrl-zero-classic_bootloader \
-	mro_ctrl-zero-h7_bootloader \
-	mro_ctrl-zero-h7-oem_bootloader \
-	mro_pixracerpro_bootloader \
-	px4_fmu-v6c_bootloader \
-	px4_fmu-v6u_bootloader \
-	px4_fmu-v6x_bootloader \
-	px4_fmu-v6xrt_bootloader \
-	siyi_n7_bootloader
-	git status

 .PHONY: coverity_scan

-coverity_scan: px4_sitl_default
+coverity_scan: posix_sitl_default

 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen
+.PHONY: parameters_metadata airframe_metadata module_documentation px4_metadata

 parameters_metadata:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
+	@python $(SRC_DIR)/src/lib/parameters/px_process_params.py -s `find $(SRC_DIR)/src -maxdepth 4 -type d` --inject-xml $(SRC_DIR)/src/lib/parameters/parameters_injected.xml --markdown
+	@python $(SRC_DIR)/src/lib/parameters/px_process_params.py -s `find $(SRC_DIR)/src -maxdepth 4 -type d` --inject-xml $(SRC_DIR)/src/lib/parameters/parameters_injected.xml --xml

 airframe_metadata:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes ver_gen
+	@python $(SRC_DIR)/Tools/px_process_airframes.py -v -a $(SRC_DIR)/ROMFS/px4fmu_common/init.d --markdown
+	@python $(SRC_DIR)/Tools/px_process_airframes.py -v -a $(SRC_DIR)/ROMFS/px4fmu_common/init.d --xml

 module_documentation:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_module_documentation
+	@python $(SRC_DIR)/Tools/px_process_module_doc.py -v --markdown $(SRC_DIR)/modules --src-path $(SRC_DIR)/src

-extract_events:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_extract_events ver_gen
+px4_metadata: parameters_metadata airframe_metadata module_documentation

-px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events
-
-doxygen:
-	@mkdir -p "$(SRC_DIR)"/build/doxygen
-	@cd "$(SRC_DIR)"/build/doxygen && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DBUILD_DOXYGEN=ON
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
-	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll
-
-# Style
+# Astyle
 # --------------------------------------------------------------------
-.PHONY: check_format format check_newlines
+.PHONY: check_format format

 check_format:
 	$(call colorecho,'Checking formatting with astyle')
-	@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh
-	@cd "$(SRC_DIR)" && git diff --check
+	@$(SRC_DIR)/Tools/astyle/check_code_style_all.sh
+	@cd $(SRC_DIR) && git diff --check

 format:
 	$(call colorecho,'Formatting with astyle')
-	@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix
-
-check_newlines:
-	$(call colorecho,'Checking for missing or duplicate newlines at the end of files')
-	@"$(SRC_DIR)"/Tools/astyle/check_newlines.sh
+	@$(SRC_DIR)/Tools/astyle/check_code_style_all.sh --fix

 # Testing
 # --------------------------------------------------------------------
-.PHONY: tests tests_coverage tests_mission tests_mission_coverage tests_offboard
-.PHONY: rostest python_coverage
+.PHONY: tests tests_coverage tests_mission tests_mission_coverage tests_offboard rostest

 tests:
-	$(eval override CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
-	$(eval ARGS += test_results)
-	$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
-	$(eval UBSAN_OPTIONS += color=always)
-	$(call cmake-build,px4_sitl_test)
+	@$(MAKE) --no-print-directory posix_sitl_default test_results \
+	ASAN_OPTIONS="color=always:check_initialization_order=1:detect_stack_use_after_return=1" \
+	UBSAN_OPTIONS="color=always"

 tests_coverage:
 	@$(MAKE) clean
-	@$(MAKE) --no-print-directory tests PX4_CMAKE_BUILD_TYPE=Coverage
-	@mkdir -p coverage
-	@lcov --directory build/px4_sitl_test --base-directory build/px4_sitl_test --gcov-tool gcov --capture -o coverage/lcov.info
+	@$(MAKE) --no-print-directory posix_sitl_default test_coverage_genhtml PX4_CMAKE_BUILD_TYPE=Coverage
+	@echo "Open $(SRC_DIR)/build/posix_sitl_default/coverage-html/index.html to see coverage"

-
-rostest: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
-
-tests_integration: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
-	@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
-	@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sitl.json
-
-tests_integration_coverage:
-	@$(MAKE) clean
-	@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
-	@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
-	@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sitl.json
-	@mkdir -p coverage
-	@lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+rostest: posix_sitl_default
+	@$(MAKE) --no-print-directory posix_sitl_default sitl_gazebo

 tests_mission: rostest
-	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_missions.test
-
-rostest_run: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
-	@"$(SRC_DIR)"/test/rostest_px4_run.sh $(TEST_FILE) mission:=$(TEST_MISSION) vehicle:=$(TEST_VEHICLE)
+	@$(SRC_DIR)/test/rostest_px4_run.sh mavros_posix_tests_missions.test

 tests_mission_coverage:
 	@$(MAKE) clean
-	@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic PX4_CMAKE_BUILD_TYPE=Coverage
-	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=VTOL_mission_1 vehicle:=standard_vtol
-	@$(MAKE) --no-print-directory px4_sitl_default generate_coverage
+	@$(MAKE) --no-print-directory posix_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
+	@$(MAKE) --no-print-directory posix_sitl_default sitl_gazebo PX4_CMAKE_BUILD_TYPE=Coverage
+	@$(SRC_DIR)/test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=vtol_new_1 vehicle:=standard_vtol
+	@$(MAKE) --no-print-directory posix_sitl_default generate_coverage

 tests_offboard: rostest
-	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_offboard_attctl.test
-	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_offboard_posctl.test
-	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_offboard_rpyrt_ctl.test
-
-python_coverage:
-	@mkdir -p "$(SRC_DIR)"/build/python_coverage
-	@cd "$(SRC_DIR)"/build/python_coverage && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DPYTHON_COVERAGE=ON
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage metadata_airframes
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage metadata_parameters
-	#@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage module_documentation # TODO: fix within coverage.py
-	@coverage combine `find . -name .coverage\*`
-	@coverage report -m
-
+	@$(SRC_DIR)/test/rostest_px4_run.sh mavros_posix_tests_offboard_attctl.test
+	@$(SRC_DIR)/test/rostest_px4_run.sh mavros_posix_tests_offboard_posctl.test

 # static analyzers (scan-build, clang-tidy, cppcheck)
 # --------------------------------------------------------------------
-.PHONY: scan-build px4_sitl_default-clang clang-tidy clang-tidy-fix clang-tidy-quiet
-.PHONY: cppcheck shellcheck_all validate_module_configs
+.PHONY: scan-build posix_sitl_default-clang clang-tidy clang-tidy-fix clang-tidy-quiet cppcheck

 scan-build:
 	@export CCC_CC=clang
 	@export CCC_CXX=clang++
-	@rm -rf "$(SRC_DIR)"/build/px4_sitl_default-scan-build
-	@rm -rf "$(SRC_DIR)"/build/scan-build/report_latest
-	@mkdir -p "$(SRC_DIR)"/build/px4_sitl_default-scan-build
-	@cd "$(SRC_DIR)"/build/px4_sitl_default-scan-build && scan-build cmake "$(SRC_DIR)" -GNinja -DCONFIG=px4_sitl_default
-	@scan-build -o "$(SRC_DIR)"/build/scan-build cmake --build "$(SRC_DIR)"/build/px4_sitl_default-scan-build
-	@find "$(SRC_DIR)"/build/scan-build -maxdepth 1 -mindepth 1 -type d -exec cp -r "{}" "$(SRC_DIR)"/build/scan-build/report_latest \;
+	@rm -rf $(SRC_DIR)/build/posix_sitl_default-scan-build
+	@rm -rf $(SRC_DIR)/build/scan-build/report_latest
+	@mkdir -p $(SRC_DIR)/build/posix_sitl_default-scan-build
+	@cd $(SRC_DIR)/build/posix_sitl_default-scan-build && scan-build cmake $(SRC_DIR) -GNinja -DCONFIG=posix_sitl_default
+	@scan-build -o $(SRC_DIR)/build/scan-build cmake --build $(SRC_DIR)/build/posix_sitl_default-scan-build
+	@find $(SRC_DIR)/build/scan-build -maxdepth 1 -mindepth 1 -type d -exec cp -r "{}" $(SRC_DIR)/build/scan-build/report_latest \;

-px4_sitl_default-clang:
-	@mkdir -p "$(SRC_DIR)"/build/px4_sitl_default-clang
-	@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/px4_sitl_default-clang
+posix_sitl_default-clang:
+	@mkdir -p $(SRC_DIR)/build/posix_sitl_default-clang
+	@cd $(SRC_DIR)/build/posix_sitl_default-clang && cmake $(SRC_DIR) $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=posix_sitl_default -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++
+	@$(PX4_MAKE) -C $(SRC_DIR)/build/posix_sitl_default-clang

-clang-tidy: px4_sitl_default-clang
-	@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -p .
+clang-tidy: posix_sitl_default-clang
+	@cd $(SRC_DIR)/build/posix_sitl_default-clang && $(SRC_DIR)/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j) -p .

 # to automatically fix a single check at a time, eg modernize-redundant-void-arg
 #  % run-clang-tidy-4.0.py -fix -j4 -checks=-\*,modernize-redundant-void-arg -p .
-clang-tidy-fix: px4_sitl_default-clang
-	@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -fix -p .
+clang-tidy-fix: posix_sitl_default-clang
+	@cd $(SRC_DIR)/build/posix_sitl_default-clang && $(SRC_DIR)/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j) -fix -p .

 # modified version of run-clang-tidy.py to return error codes and only output relevant results
-clang-tidy-quiet: px4_sitl_default-clang
-	@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -p .
+clang-tidy-quiet: posix_sitl_default-clang
+	@cd $(SRC_DIR)/build/posix_sitl_default-clang && $(SRC_DIR)/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j) -p .

 # TODO: Fix cppcheck errors then try --enable=warning,performance,portability,style,unusedFunction or --enable=all
-cppcheck: px4_sitl_default
-	@mkdir -p "$(SRC_DIR)"/build/cppcheck
-	@cppcheck -i"$(SRC_DIR)"/src/examples --enable=performance --std=c++14 --std=c99 --std=posix --project="$(SRC_DIR)"/build/px4_sitl_default/compile_commands.json --xml-version=2 2> "$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml > /dev/null
-	@cppcheck-htmlreport --source-encoding=ascii --file="$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml --report-dir="$(SRC_DIR)"/build/cppcheck --source-dir="$(SRC_DIR)"/src/
-
-shellcheck_all:
-	@"$(SRC_DIR)"/Tools/run-shellcheck.sh "$(SRC_DIR)"/ROMFS/px4fmu_common/
-	@make px4_fmu-v5_default shellcheck
-
-validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
-	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
-	-not -path "$(SRC_DIR)/src/modules/uxrce_dds_client/dds_topics.yaml" \
-	-not -path "$(SRC_DIR)/src/modules/zenoh/zenoh-pico/*" \
-	-not -path "$(SRC_DIR)/src/lib/events/libevents/*" \
-	-not -path "$(SRC_DIR)/src/lib/cdrstream/*" \
-	-not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
-	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
+cppcheck: posix_sitl_default
+	@mkdir -p $(SRC_DIR)/build/cppcheck
+	@cppcheck -i$(SRC_DIR)/src/examples --enable=performance --std=c++11 --std=c99 --std=posix --project=$(SRC_DIR)/build/posix_sitl_default/compile_commands.json --xml-version=2 2> $(SRC_DIR)/build/cppcheck/cppcheck-result.xml > /dev/null
+	@cppcheck-htmlreport --source-encoding=ascii --file=$(SRC_DIR)/build/cppcheck/cppcheck-result.xml --report-dir=$(SRC_DIR)/build/cppcheck --source-dir=$(SRC_DIR)/src/

 # Cleanup
 # --------------------------------------------------------------------
-.PHONY: clean submodulesclean submodulesupdate distclean
+.PHONY: clean submodulesclean submodulesupdate gazeboclean distclean

 clean:
-	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
-	@git submodule foreach git clean -dX --force # some submodules generate build artifacts in source
+	@rm -rf $(SRC_DIR)/build

 submodulesclean:
 	@git submodule foreach --quiet --recursive git clean -ff -x -d
 	@git submodule update --quiet --init --recursive --force || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --force --jobs 4
+	@git submodule update --init --recursive --force

 submodulesupdate:
-	@git submodule update --quiet --init --recursive --jobs 4 || true
+	@git submodule update --quiet --init --recursive || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --jobs 4
-	@git fetch --all --tags --recurse-submodules=yes --jobs=4
+	@git submodule update --init --recursive

-distclean:
-	@git submodule deinit --force $(SRC_DIR)
-	@rm -rf "$(SRC_DIR)/build"
-	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
+gazeboclean:
+	@rm -rf ~/.gazebo/*
+
+distclean: gazeboclean
+	@git submodule deinit -f .
+	@git clean -ff -x -d -e ".project" -e ".cproject" -e ".idea" -e ".settings" -e ".vscode"

-# Help / Error / Misc
 # --------------------------------------------------------------------

 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
 %:
 	$(if $(filter $(FIRST_ARG),$@), \
-		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) list_config_targets' to get a list of all possible [configuration] targets."),@#)
+		$(error "$@ cannot be the first argument. Use '$(MAKE) help|list_config_targets' to get a list of all possible [configuration] targets."),@#)
+
+#help:
+#	@echo
+#	@echo "Type 'make ' and hit the tab key twice to see a list of the available"
+#	@echo "build configurations."
+#	@echo
+
+empty :=
+space := $(empty) $(empty)

 # Print a list of non-config targets (based on http://stackoverflow.com/a/26339924/1487069)
 help:
 	@echo "Usage: $(MAKE) <target>"
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
-		awk -v RS= -F: '/(^|\n)# Files(\n|$$)/,/(^|\n)# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
-		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
+		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
+		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS) $(NUTTX_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(posix|eagle|Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"
 	@echo "Use '$(MAKE) list_config_targets' for a list of configuration targets."

 # Print a list of all config targets.
 list_config_targets:
-	@for targ in $(patsubst %_default,%[_default],$(ALL_CONFIG_TARGETS)); do echo $$targ; done
-
-check_nuttx : $(call make_list,nuttx) \
-	sizes
-
-check_linux : $(call make_list,linux) \
-	sizes
-
-check_px4: $(call make_list,nuttx,"px4") \
-	sizes
-
-check_nxp: $(call make_list,nuttx,"nxp") \
-	sizes
-
-# helpers for running olddefconfig (nuttx) and px4_savedefconfig on all boards
-.PHONY: all_oldconfig all_px4_savedefconfig
-all_oldconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ oldconfig; done
-
-all_px4_savedefconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ px4_savedefconfig; done
-
-.PHONY: failsafe_web run_failsafe_web_server
-failsafe_web:
-	@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
-	@$(MAKE) --no-print-directory px4_sitl_default failsafe_test parameters_xml \
-		PX4_CMAKE_BUILD_TYPE=Release BUILD_DIR_SUFFIX=_failsafe_web \
-		CMAKE_ARGS="-DCMAKE_CXX_COMPILER=em++ -DCMAKE_C_COMPILER=emcc"
-run_failsafe_web_server: failsafe_web
-	@cd build/px4_sitl_default_failsafe_web && \
-		python3 -m http.server
+	@for targ in $(patsubst nuttx_%,[nuttx_]%,$(ALL_CONFIG_TARGETS)); do echo $$targ; done
@@ -1,62 +1,108 @@
-# PX4 Drone Autopilot
+# PX4 Pro Drone Autopilot

-[![Releases](https://img.shields.io/github/release/PX4/PX4-Autopilot.svg)](https://github.com/PX4/PX4-Autopilot/releases) [![DOI](https://zenodo.org/badge/22634/PX4/PX4-Autopilot.svg)](https://zenodo.org/badge/latestdoi/22634/PX4/PX4-Autopilot)
+[![Releases](https://img.shields.io/github/release/PX4/Firmware.svg)](https://github.com/PX4/Firmware/releases) [![DOI](https://zenodo.org/badge/22634/PX4/Firmware.svg)](https://zenodo.org/badge/latestdoi/22634/PX4/Firmware)

-[![Build Targets](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml/badge.svg?branch=main)](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
+[![Build Status](http://ci.px4.io:8080/buildStatus/icon?job=Firmware/master)](http://ci.px4.io:8080/blue/organizations/jenkins/Firmware/activity) [![Coverity Scan](https://scan.coverity.com/projects/3966/badge.svg?flat=1)](https://scan.coverity.com/projects/3966?tab=overview)

-[![Discord Shield](https://discordapp.com/api/guilds/1022170275984457759/widget.png?style=shield)](https://discord.gg/dronecode)
+[![Slack](https://px4-slack.herokuapp.com/badge.svg)](http://slack.px4.io)

-This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
+This repository holds the [PX4 Pro](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/Firmware/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.

-PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box.
-
-* Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/main/LICENSE))
-* [Supported airframes](https://docs.px4.io/main/en/airframes/airframe_reference.html) ([portfolio](https://px4.io/ecosystem/commercial-systems/)):
-  * [Multicopters](https://docs.px4.io/main/en/frames_multicopter/)
-  * [Fixed wing](https://docs.px4.io/main/en/frames_plane/)
-  * [VTOL](https://docs.px4.io/main/en/frames_vtol/)
-  * [Autogyro](https://docs.px4.io/main/en/frames_autogyro/)
-  * [Rover](https://docs.px4.io/main/en/frames_rover/)
-  * many more experimental types (Blimps, Boats, Submarines, High Altitude Balloons, Spacecraft, etc)
-* Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)
-
-## Releases
-
-Release notes and supporting information for PX4 releases can be found on the [Developer Guide](https://docs.px4.io/main/en/releases/).
-
-## Building a PX4 based drone, rover, boat or robot
-
-The [PX4 User Guide](https://docs.px4.io/main/en/) explains how to assemble [supported vehicles](https://docs.px4.io/main/en/airframes/airframe_reference.html) and fly drones with PX4. See the [forum and chat](https://docs.px4.io/main/en/#getting-help) if you need help!
+* Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/Firmware/blob/master/LICENSE))
+* [Supported airframes](https://docs.px4.io/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):
+  * [Multicopters](https://docs.px4.io/en/airframes/airframe_reference.html#copter)
+  * [Fixed wing](https://docs.px4.io/en/airframes/airframe_reference.html#plane)
+  * [VTOL](https://docs.px4.io/en/airframes/airframe_reference.html#vtol)
+  * many more experimental types (Rovers, Blimps, Boats, Submarines, etc)
+* Releases: [Downloads](https://github.com/PX4/Firmware/releases)


-## Changing Code and Contributing
+## PX4 Users

-This [Developer Guide](https://docs.px4.io/main/en/development/development.html) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.
-
-Developers should read the [Guide for Contributions](https://docs.px4.io/main/en/contribute/).
-See the [forum and chat](https://docs.px4.io/main/en/#getting-help) if you need help!
+The [PX4 User Guide](https://docs.px4.io/en/) explains how to assemble [supported vehicles](https://docs.px4.io/en/airframes/airframe_reference.html) and fly drones with PX4. 
+See the [forum and chat](https://docs.px4.io/en/#support) if you need help!


-## Weekly Dev Call
+## PX4 Developers

-The PX4 Dev Team syncs up on a [weekly dev call](https://docs.px4.io/main/en/contribute/).
+This [Developer Guide](https://dev.px4.io/) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.
+
+Developers should read the [Guide for Contributions](https://dev.px4.io/en/contribute/).
+See the [forum and chat](https://dev.px4.io/en/#support) if you need help!
+
+
+### Weekly Dev Call
+
+The PX4 Dev Team syncs up on a [weekly dev call](https://dev.px4.io/en/contribute/#dev_call).

 > **Note** The dev call is open to all interested developers (not just the core dev team). This is a great opportunity to meet the team and contribute to the ongoing development of the platform. It includes a QA session for newcomers. All regular calls are listed in the [Dronecode calendar](https://www.dronecode.org/calendar/).


 ## Maintenance Team

-See the latest list of maintainers on [MAINTAINERS](MAINTAINERS.md) file at the root of the project.
+  * Project: Founder - [Lorenz Meier](https://github.com/LorenzMeier), Architecture: [Daniel Agar](https://github.com/dagar)
+    * [Dev Call](https://github.com/PX4/Firmware/labels/devcall) - [Ramon Roche](https://github.com/mrpollo)
+  * Communication Architecture
+    * [Beat Kueng](https://github.com/bkueng)
+    * [Julian Oes](https://github.com/JulianOes)
+  * UI / UX
+    * [Donald Gagne](https://github.com/DonLakeFlyer)
+    * [Gus Grubba](https://github.com/dogmaphobic)
+  * [Multicopter Flight Control](https://github.com/PX4/Firmware/labels/multicopter)
+    * [Dennis Mannhart](https://github.com/Stifael)
+    * [Matthias Grob](https://github.com/MaEtUgR)
+  * [VTOL Flight Control](https://github.com/PX4/Firmware/labels/vtol)
+    * [Daniel Agar](https://github.com/dagar)
+    * [Mathieu Bresciani](https://github.com/bresch)
+    * [Sander Smeets](https://github.com/sanderux)
+    * [Roman Bapst](https://github.com/tumbili)
+    * [Andreas Antener](https://github.com/AndreasAntener)
+  * [Fixed Wing Flight Control](https://github.com/PX4/Firmware/labels/fixedwing)
+    * [Daniel Agar](https://github.com/dagar)
+    * [Paul Riseborough](https://github.com/priseborough)
+  * Racers - [Matthias Grob](https://github.com/MaEtUgR)
+  * OS / drivers - [David Sidrane](https://github.com/davids5)
+  * [UAVCAN](https://github.com/PX4/Firmware/labels/uavcan) / Industrial - [Pavel Kirienko](https://github.com/pavel-kirienko)
+  * [State Estimation](https://github.com/PX4/Firmware/issues?q=is%3Aopen+is%3Aissue+label%3A%22state+estimation%22) - [James Goppert](https://github.com/jgoppert), [Paul Riseborough](https://github.com/priseborough)
+  * Vision based navigation
+    * [Christoph Tobler](https://github.com/ChristophTobler)
+    * [Mohammed Kabir](https://github.com/mhkabir)
+  * Obstacle Avoidance - [Martina Rivizzigno](https://github.com/mrivi)
+  * [Snapdragon](https://github.com/PX4/Firmware/labels/snapdragon)
+    * [Christoph Tobler](https://github.com/ChristophTobler)
+  * [Intel Aero](https://github.com/PX4/Firmware/labels/intel%20aero)
+    * [Sugnan Prabhu](https://github.com/sugnanprabhu)
+    * [José Roberto de Souza](https://github.com/zehortigoza)
+  * [Raspberry Pi / Navio](https://github.com/PX4/Firmware/labels/raspberry_pi) - [Beat Kueng](https://github.com/bkueng)
+  * [Airmind MindPX / MindRacer](https://github.com/PX4/Firmware/labels/mindpx) - [Henry Zhang](https://github.com/iZhangHui)
+  * RTPS/ROS2 Interface - [Vicente Monge](https://github.com/vicenteeprosima)

-For the latest stats on contributors please see the latest stats for the Dronecode ecosystem in our project dashboard under [LFX Insights](https://insights.lfx.linuxfoundation.org/foundation/dronecode). For information on how to update your profile and affiliations please see the following support link on how to [Complete Your LFX Profile](https://docs.linuxfoundation.org/lfx/my-profile/complete-your-lfx-profile). Dronecode publishes a yearly snapshot of contributions and achievements on its [website under the Reports section](https://dronecode.org).
+See also [About Us](http://px4.io/about-us/#development_team) (px4.io) and the [contributors list](https://github.com/PX4/Firmware/graphs/contributors) (Github).

 ## Supported Hardware

-For the most up to date information, please visit [PX4 User Guide > Autopilot Hardware](https://docs.px4.io/main/en/flight_controller/).
+This repository contains code supporting these boards:
+  * [Snapdragon Flight](https://docs.px4.io/en/flight_controller/snapdragon_flight.html)
+  * [Intel Aero](https://docs.px4.io/en/flight_controller/intel_aero.html)
+  * [Raspberry PI with Navio 2](https://docs.px4.io/en/flight_controller/raspberry_pi_navio2.html)
+  * [Parrot Bebop 2](https://dev.px4.io/en/advanced/parrot_bebop.html)
+  * FMUv2.x
+    * [Pixhawk](https://docs.px4.io/en/flight_controller/pixhawk.html)
+    * [Pixhawk Mini](https://docs.px4.io/en/flight_controller/pixhawk_mini.html)
+    * [Pixfalcon](https://docs.px4.io/en/flight_controller/pixfalcon.html)
+  * FMUv3.x [Pixhawk 2](https://pixhawk.org/modules/pixhawk2)
+  * FMUv4.x
+    * [Pixracer](https://docs.px4.io/en/flight_controller/pixracer.html)
+    * [Pixhawk 3 Pro](https://docs.px4.io/en/flight_controller/pixhawk3_pro.html)
+  * FMUv5.x (ARM Cortex M7, future Pixhawk)
+  * [STM32F4Discovery](http://www.st.com/en/evaluation-tools/stm32f4discovery.html) (basic support) [Tutorial](https://pixhawk.org/modules/stm32f4discovery)
+  * [Gumstix AeroCore](https://www.gumstix.com/aerocore-2/) (only v2)
+  * [Airmind MindPX V2.8](http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf)
+  * [Airmind MindRacer V1.2](http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf)
+  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/en/flight_controller/crazyflie2.html)

-## Project Governance
+Additional information about supported hardware can be found in [PX4 user Guide > Autopilot Hardware](https://docs.px4.io/en/flight_controller/).

-The PX4 Autopilot project including all of its trademarks is hosted under [Dronecode](https://www.dronecode.org/), part of the Linux Foundation.
+## Project Roadmap

-<a href="https://www.dronecode.org/" style="padding:20px" ><img src="https://dronecode.org/wp-content/uploads/sites/24/2020/08/dronecode_logo_default-1.png" alt="Dronecode Logo" width="110px"/></a>
-<div style="padding:10px">&nbsp;</div>
+A high level project roadmap is available [here](https://www.dronecode.org/roadmap/).
@@ -31,14 +31,11 @@
 #
 ############################################################################

+message(STATUS "ROMFS: ${config_romfs_root}")
+
+set(config_romfs_files_list)
 set(romfs_src_dir ${PX4_SOURCE_DIR}/ROMFS/${config_romfs_root})
-set(romfs_gen_root_dir ${PX4_BINARY_DIR}/etc)
-
-file(RELATIVE_PATH romfs_path_relative ${PX4_SOURCE_DIR} ${romfs_src_dir})
-message(STATUS "ROMFS: ${romfs_path_relative}")
-
-set_property(GLOBAL PROPERTY PX4_ROMFS_FILES)
-set_property(GLOBAL PROPERTY PX4_ROMFS_CMAKE_FILES)
+set(romfs_temp_dir ${PX4_BINARY_DIR}/genromfs/${config_romfs_root})

 #=============================================================================
 #
@@ -60,372 +57,64 @@ set_property(GLOBAL PROPERTY PX4_ROMFS_CMAKE_FILES)
 #			)
 #
 function(px4_add_romfs_files)
-	set_property(GLOBAL APPEND PROPERTY PX4_ROMFS_CMAKE_FILES ${CMAKE_CURRENT_LIST_FILE})
-
 	foreach(arg IN LISTS ARGN)
-		if(NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${arg})
-			message(FATAL_ERROR "${CMAKE_CURRENT_LIST_DIR}/${arg} doesn't exist")
-		endif()
-		set_property(GLOBAL APPEND PROPERTY PX4_ROMFS_FILES ${CMAKE_CURRENT_LIST_DIR}/${arg})
+		list(APPEND config_romfs_files_list
+			${CMAKE_CURRENT_SOURCE_DIR}/${arg}
+			)
 	endforeach()
+
+	set(config_romfs_files_list ${config_romfs_files_list} CACHE INTERNAL "ROMFS file list")
 endfunction()

 # get list of all ROMFS files
 add_subdirectory(${romfs_src_dir})

 # directory setup
-# copy all romfs files, process airframes
-get_property(romfs_cmake_files GLOBAL PROPERTY PX4_ROMFS_CMAKE_FILES)
-get_property(romfs_copy_files GLOBAL PROPERTY PX4_ROMFS_FILES)
-get_property(module_config_files GLOBAL PROPERTY PX4_MODULE_CONFIG_FILES)
-file(GLOB jinja_templates ${PX4_SOURCE_DIR}/Tools/serial/*.jinja)
-if (px4_constrained_flash_build)
-	set(added_arguments --constrained-flash)
-endif()
-if(PX4_ETHERNET)
-	set(added_arguments ${added_arguments} --ethernet)
-endif()
-# create list of relative romfs file names
-set(romfs_copy_files_relative)
-foreach(romfs_file IN LISTS romfs_copy_files)
-	string(REPLACE "${romfs_src_dir}/" "" romfs_file_rel ${romfs_file})
-	list(APPEND romfs_copy_files_relative ${romfs_file_rel})
-endforeach()
-# copy the ROMFS files by creating a tar and extracting it to the build
-# directory (which preserves the directory structure)
-file(MAKE_DIRECTORY ${romfs_gen_root_dir})
-set(romfs_tar_file ${PX4_BINARY_DIR}/romfs_files.tar)
-add_custom_command(
-	OUTPUT ${romfs_tar_file}
-	COMMAND ${CMAKE_COMMAND} -E tar cf ${romfs_tar_file} ${romfs_copy_files_relative}
-	WORKING_DIRECTORY ${romfs_src_dir}
-	DEPENDS
-		${romfs_copy_files}
-		${jinja_templates}
-		${module_config_files}
-		${romfs_cmake_files}
-		${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
-		${PX4_SOURCE_DIR}/Tools/px4airframes/markdownout.py
-		${PX4_SOURCE_DIR}/Tools/px4airframes/rcout.py
-		${PX4_SOURCE_DIR}/Tools/px4airframes/srcparser.py
-		${PX4_SOURCE_DIR}/Tools/px4airframes/srcscanner.py
-		${PX4_SOURCE_DIR}/Tools/px4airframes/xmlout.py
-		${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
-	)
-
-
-set(romfs_copy_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_copy.stamp)
-add_custom_command(
-	OUTPUT
-		${romfs_gen_root_dir}/init.d/rc.serial
-		${romfs_gen_root_dir}/init.d/rc.autostart
-		${romfs_gen_root_dir}/init.d/rc.autostart.post
-		${romfs_gen_root_dir}/init.d/rc.filepaths
-		${romfs_copy_stamp}
-	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
-	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
+# copy all romfs files, process airframes, prune comments
+add_custom_command(OUTPUT ${romfs_temp_dir}/init.d/rcS ${romfs_temp_dir}/init.d/rc.autostart
+	COMMAND cmake -E copy_directory ${romfs_src_dir} ${romfs_temp_dir}
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
-		--airframes-path ${romfs_gen_root_dir}/init.d
-		--start-script ${romfs_gen_root_dir}/init.d/rc.autostart
-		--board ${PX4_BOARD}
-	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/serial/generate_config.py
-		--rc-dir ${romfs_gen_root_dir}/init.d
-		--serial-ports ${board_serial_ports} ${added_arguments}
-		--config-files ${module_config_files} #--verbose
-	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/filepaths/generate_config.py
-		--rc-dir ${romfs_gen_root_dir}/init.d
-		--params-file ${CONFIG_BOARD_PARAM_FILE}
-	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_copy_stamp}
-	WORKING_DIRECTORY ${romfs_gen_root_dir}
-	DEPENDS ${romfs_tar_file}
-	COMMENT "ROMFS: copying, generating airframes"
-	)
-
-# copy extras into ROMFS
-set(extras_dependencies)
-
-# optional board architecture defaults
-set(board_arch_rc_file "rc.board_arch_defaults")
-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file}")
-	file(RELATIVE_PATH rc_file_relative ${PX4_SOURCE_DIR} ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file})
-	message(STATUS "ROMFS:  Adding ${rc_file_relative} -> /etc/init.d/${board_arch_rc_file}")
-
-	add_custom_command(
-		OUTPUT
-			${romfs_gen_root_dir}/init.d/${board_arch_rc_file}
-			${board_arch_rc_file}.stamp
-		COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file} ${romfs_gen_root_dir}/init.d/${board_arch_rc_file}
-		COMMAND ${CMAKE_COMMAND} -E touch ${board_arch_rc_file}.stamp
-		DEPENDS
-			${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file}
-			romfs_copy.stamp
-		COMMENT "ROMFS: copying ${board_arch_rc_file}"
-	)
-
-	list(APPEND extras_dependencies
-		${board_arch_rc_file}.stamp
-	)
-endif()
-
-
-# board custom init files
-set(OPTIONAL_BOARD_RC)
-list(APPEND OPTIONAL_BOARD_RC
-	rc.board_defaults
-	rc.board_sensors
-	rc.board_extras
-	rc.board_mavlink
-)
-
-foreach(board_rc_file ${OPTIONAL_BOARD_RC})
-
-	if(EXISTS "${PX4_BOARD_DIR}/init/${board_rc_file}")
-		file(RELATIVE_PATH rc_file_relative ${PX4_SOURCE_DIR} ${PX4_BOARD_DIR}/init/${board_rc_file})
-		message(STATUS "ROMFS:  Adding ${rc_file_relative} -> /etc/init.d/${board_rc_file}")
-
-		add_custom_command(
-			OUTPUT
-				${romfs_gen_root_dir}/init.d/${board_rc_file}
-				${board_rc_file}.stamp
-			COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_BOARD_DIR}/init/${board_rc_file} ${romfs_gen_root_dir}/init.d/${board_rc_file}
-			COMMAND ${CMAKE_COMMAND} -E touch ${board_rc_file}.stamp
-			DEPENDS
-				${PX4_BOARD_DIR}/init/${board_rc_file}
-				romfs_copy.stamp
-			COMMENT "ROMFS: copying ${board_rc_file}"
-		)
-
-		list(APPEND extras_dependencies
-			${board_rc_file}.stamp
-			)
-	endif()
-
-endforeach()
-
-
-# board extras
-set(OPTIONAL_BOARD_EXTRAS)
-file(GLOB OPTIONAL_BOARD_EXTRAS ${PX4_BOARD_DIR}/extras/*)
-
-# bootloader (optional)
-#  - if systemcmds/bl_update included and board bootloader available then generate rc.board_bootloader_upgrade and copy bootloader binary
-#  - otherwise remove bootloader binary from extras in final ROMFS
-foreach(board_extra_file ${OPTIONAL_BOARD_EXTRAS})
-	file(RELATIVE_PATH extra_file_base_name ${PX4_BOARD_DIR}/extras/ ${board_extra_file})
-	if(${extra_file_base_name} MATCHES "${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin")
-		if(CONFIG_SYSTEMCMDS_BL_UPDATE)
-			# generate rc.board_bootloader_upgrade
-			set(BOARD_FIRMWARE_BIN "${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin")
-			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade @ONLY)
-		else()
-			# remove bootloader from extras
-			list(REMOVE_ITEM OPTIONAL_BOARD_EXTRAS ${board_extra_file})
-		endif()
-
-	endif()
-endforeach()
-
-foreach(board_extra_file ${OPTIONAL_BOARD_EXTRAS})
-
-	if(EXISTS "${board_extra_file}")
-		file(RELATIVE_PATH extra_file_base_name ${PX4_BOARD_DIR}/extras/ ${board_extra_file})
-		file(RELATIVE_PATH extra_file_relative_source ${PX4_SOURCE_DIR} ${board_extra_file})
-		message(STATUS "ROMFS:  Adding ${extra_file_relative_source} -> /etc/extras/${extra_file_base_name}")
-
-		add_custom_command(
-			OUTPUT
-				${romfs_gen_root_dir}/extras/${extra_file_base_name}
-				${extra_file_base_name}.stamp
-			COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_BOARD_DIR}/extras/${extra_file_base_name} ${romfs_gen_root_dir}/extras/${extra_file_base_name}
-			COMMAND ${CMAKE_COMMAND} -E touch ${extra_file_base_name}.stamp
-			DEPENDS
-				${board_extra_file}
-				romfs_copy.stamp
-			COMMENT "ROMFS: copying ${board_extra_file}"
-		)
-
-		list(APPEND extras_dependencies
-			${extra_file_base_name}.stamp
-		)
-	endif()
-
-endforeach()
-
-
-
-if(config_uavcan_peripheral_firmware)
-
-	include(ExternalProject)
-
-	foreach(uavcan_peripheral_config ${config_uavcan_peripheral_firmware})
-		# include the UAVCAN peripheral binaries in ROMFS
-		message(STATUS "ROMFS:  Adding UAVCAN peripheral ${uavcan_peripheral_config} -> /etc/uavcan/fw/")
-
-		# ExternalProject_Add() with GIT_SUBMODULES "" initializes no submodules.
-		cmake_policy(SET CMP0097 NEW)
-
-		include(ExternalProject)
-
-		ExternalProject_Add(build_${uavcan_peripheral_config}
-			GIT_REPOSITORY ${CMAKE_SOURCE_DIR}
-			GIT_TAG ${PX4_GIT_TAG}
-			GIT_SUBMODULES ""
-			DOWNLOAD_NO_PROGRESS true
-			CMAKE_ARGS -DCONFIG=${uavcan_peripheral_config}
-			INSTALL_COMMAND ""
-			USES_TERMINAL_BUILD true
-			BUILD_ALWAYS 1
-		)
-
-		ExternalProject_Get_Property(build_${uavcan_peripheral_config} BINARY_DIR)
-
-		add_custom_command(
-			OUTPUT
-				${romfs_gen_root_dir}/uavcan/fw/_${uavcan_board_id}.bin
-				${uavcan_peripheral_config}.stamp
-			COMMAND ${CMAKE_COMMAND} -E make_directory ${romfs_gen_root_dir}/uavcan/fw/
-			COMMAND ${CMAKE_COMMAND} -E copy ${BINARY_DIR}/deploy/*.bin ${romfs_gen_root_dir}/uavcan/fw/
-			COMMAND ls -lsa ${romfs_gen_root_dir}/uavcan/fw/
-			COMMAND ${CMAKE_COMMAND} -E touch ${uavcan_peripheral_config}.stamp
-			DEPENDS
-				build_${uavcan_peripheral_config}
-			COMMENT "ROMFS: copying ${uavcan_peripheral_config}"
-		)
-
-		list(APPEND extras_dependencies
-			${uavcan_peripheral_config}.stamp
-		)
-	endforeach()
-endif()
-
-list(APPEND extras_dependencies
-	${config_romfs_extra_dependencies}
-	)
-
-if (config_romfs_extra_files)
-	set(extras_copy_cmd COMMAND ${CMAKE_COMMAND} -E copy_if_different ${config_romfs_extra_files} ${romfs_gen_root_dir}/extras/)
-else()
-	set(extras_copy_cmd "")
-endif()
-add_custom_command(OUTPUT romfs_extras.stamp
-	COMMAND ${CMAKE_COMMAND} -E make_directory ${romfs_gen_root_dir}/extras/
-	COMMAND ${CMAKE_COMMAND} -E make_directory ${PX4_BINARY_DIR}/romfs_extras/
-	COMMAND ${CMAKE_COMMAND} -E copy_directory ${PX4_BINARY_DIR}/romfs_extras/ ${romfs_gen_root_dir}/extras/
-	${extras_copy_cmd}
-	COMMAND ${CMAKE_COMMAND} -E touch romfs_extras.stamp
+		-a ${romfs_temp_dir}/init.d
+		-s ${romfs_temp_dir}/init.d/rc.autostart
+		--board ${BOARD}
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py
+		--folder ${romfs_temp_dir} --board ${BOARD}
 	DEPENDS
-		romfs_copy.stamp
-		${config_romfs_extra_files}
-		${extras_dependencies}
-	COMMENT "ROMFS: copying extras"
-	)
-
-add_custom_target(romfs_gen_files_target
-	DEPENDS
-		${romfs_copy_stamp}
-		${romfs_gen_root_dir}/init.d/rc.serial
-		${romfs_gen_root_dir}/init.d/rc.filepaths
-		romfs_extras.stamp
-	)
-
-add_custom_command(
-	OUTPUT romfs_pruned.stamp
-	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py --folder ${romfs_gen_root_dir} --board ${PX4_BOARD}
-	COMMAND ${CMAKE_COMMAND} -E touch romfs_pruned.stamp
-	DEPENDS
-		romfs_copy.stamp
-		romfs_extras.stamp
+		${config_romfs_files_list}
 		${PX4_SOURCE_DIR}/Tools/px_romfs_pruner.py
-	COMMENT "ROMFS: pruning"
+		${PX4_SOURCE_DIR}/ROMFS/${config_romfs_root}/init.d/rcS
+		${PX4_SOURCE_DIR}/Tools/px_process_airframes.py
 	)

-if("${CONFIG_FS_CROMFS}" STREQUAL "y")
-	add_custom_command(
-		OUTPUT ${CMAKE_BINARY_DIR}/gencromfs
-		COMMAND make --no-print-directory --silent -f Makefile.host gencromfs
-		COMMAND ${CMAKE_COMMAND} -E copy_if_different gencromfs ${CMAKE_BINARY_DIR}/gencromfs
-		DEPENDS ${PX4_SOURCE_DIR}/platforms/nuttx/NuttX/nuttx/tools/gencromfs.c
-		WORKING_DIRECTORY ${NUTTX_DIR}/tools
+set(romfs_dependencies)
+list(APPEND romfs_dependencies
+	${romfs_temp_dir}/init.d/rcS
+	${romfs_temp_dir}/init.d/rc.autostart
 	)
-
-	# create nsh_romfsimg.c
-	add_custom_command(OUTPUT nsh_romfsimg.c
-		COMMAND ${CMAKE_COMMAND} -E remove -f nsh_romfsimg.c
-		COMMAND ${CMAKE_BINARY_DIR}/gencromfs ${romfs_gen_root_dir} nsh_romfsimg.c
-		DEPENDS
-			${CMAKE_BINARY_DIR}/gencromfs
-			romfs_pruned.stamp
-		COMMENT "ROMFS: generating image"
-	)
-
-	add_library(romfs STATIC nsh_romfsimg.c)
-	add_dependencies(romfs prebuild_targets)
-	set_target_properties(romfs PROPERTIES LINKER_LANGUAGE C)
-
-elseif("${CONFIG_FS_ROMFS}" STREQUAL "y")
-	# create romfs.img
-	find_program(GENROMFS genromfs)
-	if(NOT GENROMFS)
-		message(FATAL_ERROR "genromfs not found")
-	endif()
-
-	add_custom_command(
-		OUTPUT
-			romfs.img
-			romfs.txt
-		COMMAND ${CMAKE_COMMAND} -E remove -f romfs.img romfs.txt
-		COMMAND ${GENROMFS} -f romfs.img -d ${romfs_gen_root_dir} -V "NSHInitVol" -v > romfs.txt 2>&1
-		DEPENDS romfs_pruned.stamp
-		COMMENT "ROMFS: generating image"
-	)
-
-
-	# create nsh_romfsimg.c
-	find_program(XXD xxd)
-	if(NOT XXD)
-		message(FATAL_ERROR "xxd not found")
-	endif()
-
-	find_program(SED sed)
-	if(NOT SED)
-		message(FATAL_ERROR "sed not found")
-	endif()
-
-	add_custom_command(OUTPUT nsh_romfsimg.c
-		COMMAND ${CMAKE_COMMAND} -E remove -f nsh_romfsimg.c
-		COMMAND ${XXD} -i romfs.img nsh_romfsimg.c
-		COMMAND ${SED} 's/unsigned/const unsigned/g' nsh_romfsimg.c > nsh_romfsimg.c.tmp && ${CMAKE_COMMAND} -E rename nsh_romfsimg.c.tmp nsh_romfsimg.c
-		DEPENDS romfs.img
-	)
-
-	add_library(romfs STATIC nsh_romfsimg.c)
-	add_dependencies(romfs prebuild_targets)
-	set_target_properties(romfs PROPERTIES LINKER_LANGUAGE C)
+	
+# copy px4io binary if configured
+if (config_io_board)
+	list(APPEND romfs_dependencies
+		copy_px4io_bin
+		${fw_io_bin}
+		)
 endif()

-
-
-# shellcheck
-find_program(SHELLCHECK_PATH shellcheck)
-
-if(SHELLCHECK_PATH)
-
-	# TODO: fix SC2086, SC2166
-	add_custom_target(shellcheck
-		COMMAND ${SHELLCHECK_PATH} --shell=sh
-			--exclude=SC1090 # SC1090: use of source (.) - Can't follow non-constant source. Use a directive to specify location.
-			--exclude=SC1091 # SC1091: use of source (.) - Not following: xxxx openBinaryFile: does not exist (No such file or directory)
-			--exclude=SC2121 # SC2121: To assign a variable, use just 'var=value'
-			--exclude=SC2086 # SC2086: Double quote to prevent globbing and word splitting.
-			--exclude=SC2166 # SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
-			--exclude=SC2154 # SC2154: <var> is referenced but not assigned (NuttX uses different asssignment)
-			--exclude=SC2164 # SC2164: Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
-			--exclude=SC2169 # SC2169: In dash, 'source' in place of '.' is not supported. (we alias it)
-			--exclude=SC2039 # SC2039: In POSIX sh, 'source' in place of '.' is undefined. (we alias it)
-			--exclude=SC2181 # SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
-			`find ${romfs_gen_root_dir}/init.d -type f`
-		DEPENDS ${romfs_gen_root_dir}/init.d/rc.autostart
-		WORKING_DIRECTORY ${romfs_gen_root_dir}
-		USES_TERMINAL
+# create romfs.img
+add_custom_command(OUTPUT romfs.img
+	COMMAND ${CMAKE_COMMAND} -E remove -f romfs.img romfs.txt
+	COMMAND ${GENROMFS} -f romfs.img -d ${romfs_temp_dir} -V "NSHInitVol" -v > romfs.txt 2>&1
+	DEPENDS ${romfs_dependencies}
 	)
-endif()
+
+# create nsh_romfsimg.c
+add_custom_command(OUTPUT nsh_romfsimg.c
+	COMMAND ${CMAKE_COMMAND} -E remove -f nsh_romfsimg.c
+	COMMAND xxd -i romfs.img nsh_romfsimg.c
+	COMMAND sed 's/unsigned/const unsigned/g' nsh_romfsimg.c > nsh_romfsimg.c.tmp && mv nsh_romfsimg.c.tmp nsh_romfsimg.c
+	DEPENDS romfs.img
+	)
+
+add_library(romfs STATIC nsh_romfsimg.c)
+add_dependencies(romfs prebuild_targets)
+set_target_properties(romfs PROPERTIES LINKER_LANGUAGE C)
@@ -1,34 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-add_subdirectory(init.d)
@@ -1,36 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-px4_add_romfs_files(
-	rcS
-)
@@ -1,107 +0,0 @@
-#!/bin/sh
-# Un comment and use set +e to ignore and set -e to enable 'exit on error control'
-set +e
-# Un comment the line below to help debug scripts by printing a trace of the script commands
-#set -x
-# PX4FMU startup script.
-#
-# NOTE: environment variable references:
-#    If the dollar sign ('$') is followed by a left bracket ('{') then the
-#    variable name is terminated with the right bracket character ('}').
-#    Otherwise, the variable name goes to the end of the argument.
-#
-#
-# NOTE: COMMENT LINES ARE REMOVED BEFORE STORED IN ROMFS.
-#
-#------------------------------------------------------------------------------
-set R /
-
-#
-# Print full system version.
-#
-ver all
-
-# Load param file location from kconfig
-. ${R}etc/init.d/rc.filepaths
-
-#
-# Load parameters.
-#
-param select $PARAM_FILE
-
-if ! param load
-then
-	param reset_all
-fi
-
-#
-# Optional board architecture defaults: rc.board_arch_defaults
-#
-set BOARD_ARCH_RC_DEFAULTS ${R}etc/init.d/rc.board_arch_defaults
-if [ -f $BOARD_ARCH_RC_DEFAULTS ]
-then
-	echo "Board architecture defaults: ${BOARD_ARCH_RC_DEFAULTS}"
-	. $BOARD_ARCH_RC_DEFAULTS
-fi
-unset BOARD_ARCH_RC_DEFAULTS
-
-#
-# Optional board defaults: rc.board_defaults
-#
-set BOARD_RC_DEFAULTS ${R}etc/init.d/rc.board_defaults
-if [ -f $BOARD_RC_DEFAULTS ]
-then
-	echo "Board defaults: ${BOARD_RC_DEFAULTS}"
-	. $BOARD_RC_DEFAULTS
-fi
-unset BOARD_RC_DEFAULTS
-
-#
-# Start system state indicator.
-#
-rgbled start -X -q
-rgbled_ncp5623c start -X -q
-
-#
-# board sensors: rc.sensors
-#
-set BOARD_RC_SENSORS ${R}etc/init.d/rc.board_sensors
-if [ -f $BOARD_RC_SENSORS ]
-then
-	echo "Board sensors: ${BOARD_RC_SENSORS}"
-	. $BOARD_RC_SENSORS
-fi
-unset BOARD_RC_SENSORS
-
-#
-# Start UART/Serial device drivers.
-# Note: rc.serial is auto-generated from Tools/serial/generate_config.py
-#
-. ${R}etc/init.d/rc.serial
-
-# Check for flow sensor
-if param compare -s SENS_EN_PX4FLOW 1
-then
-	px4flow start -X &
-fi
-
-if param compare -s IMU_GYRO_CAL_EN 1
-then
-	gyro_calibration start
-fi
-
-
-if param compare -s MBE_ENABLE 1
-then
-	# conservative mag bias estimation
-	param set-default MBE_LEARN_GAIN 5
-	param set-default IMU_GYRO_CUTOFF 20
-	mag_bias_estimator start
-fi
-
-param set-default SENS_MAG_RATE 100
-
-sensors start
-
-uavcannode start
-unset R
@@ -1,34 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-add_subdirectory(init.d)
@@ -1,36 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-px4_add_romfs_files(
-	rcS
-)
@@ -1,68 +0,0 @@
-#!/bin/sh
-# Un comment and use set +e to ignore and set -e to enable 'exit on error control'
-set +e
-# Un comment the line below to help debug scripts by printing a trace of the script commands
-#set -x
-# PX4FMU startup script.
-#
-# NOTE: environment variable references:
-#    If the dollar sign ('$') is followed by a left bracket ('{') then the
-#    variable name is terminated with the right bracket character ('}').
-#    Otherwise, the variable name goes to the end of the argument.
-#
-#
-# NOTE: COMMENT LINES ARE REMOVED BEFORE STORED IN ROMFS.
-#
-#------------------------------------------------------------------------------
-set R /
-
-#
-# Print full system version.
-#
-ver all
-
-#
-# Set the parameter file the board supports params on
-# MTD device.
-#
-if mft query -q -k MTD -s MTD_PARAMETERS -v /fs/mtd_params
-then
-	set PARAM_FILE /fs/mtd_params
-fi
-
-#
-# Load parameters.
-#
-# if the board has a storage for (factory) calibration data
-if mft query -q -k MTD -s MTD_CALDATA -v /fs/mtd_caldata
-then
-	param load /fs/mtd_caldata
-fi
-
-#
-# Load parameters.
-#
-param select $PARAM_FILE
-if ! param load
-then
-	param reset_all
-fi
-
-#
-# Try to mount the microSD card.
-#
-mount -t vfat /dev/mmcsd0 /fs/microsd
-if [ $? = 0 ]
-then
-	echo "SD card mounted at /fs/microsd"
-else
-	echo "No SD card found"
-fi
-
-unset R
-
-echo ""
-echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-echo "!!!!!!     This is the PERFORMANCE TESTING firmware! WARNs and ERRORs are expected!     !!!!!"
-echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-echo ""
@@ -32,7 +32,4 @@
 ############################################################################

 add_subdirectory(init.d)
-# TODO: make this configurable from the board config, or better combine
-if("${PX4_BOARD}" MATCHES "sitl")
-	add_subdirectory(init.d-posix)
-endif()
+add_subdirectory(mixers)
@@ -1,45 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-add_subdirectory(airframes)
-
-px4_add_romfs_files(
-	px4-rc.mavlink
-	px4-rc.simulator
-	px4-rc.gzsim
-	px4-rc.jmavsim
-	px4-rc.mavlinksim
-	px4-rc.sihsim
-	rc.replay
-	rcS
-)
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -1,30 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Iris Quadrotor SITL
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -1,31 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL jMAVSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default EKF2_RNG_A_HMAX 10
@@ -1,96 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Omnicopter SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jalim@ethz.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-
-param set-default CA_ROTOR0_PX 0.14435
-param set-default CA_ROTOR0_PY -0.14435
-param set-default CA_ROTOR0_PZ -0.14435
-param set-default CA_ROTOR0_KM 0.05 # CCW
-param set-default CA_ROTOR0_AX -0.788675
-param set-default CA_ROTOR0_AY -0.211325
-param set-default CA_ROTOR0_AZ -0.57735
-
-param set-default CA_ROTOR1_PX -0.14435
-param set-default CA_ROTOR1_PY -0.14435
-param set-default CA_ROTOR1_PZ -0.14435
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_AX 0.211325
-param set-default CA_ROTOR1_AY -0.788675
-param set-default CA_ROTOR1_AZ 0.57735
-
-param set-default CA_ROTOR2_PX 0.14435
-param set-default CA_ROTOR2_PY 0.14435
-param set-default CA_ROTOR2_PZ -0.14435
-param set-default CA_ROTOR2_KM 0.05
-param set-default CA_ROTOR2_AX -0.211325
-param set-default CA_ROTOR2_AY 0.788675
-param set-default CA_ROTOR2_AZ 0.57735
-
-param set-default CA_ROTOR3_PX -0.14435
-param set-default CA_ROTOR3_PY 0.14435
-param set-default CA_ROTOR3_PZ -0.14435
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR3_AX 0.788675
-param set-default CA_ROTOR3_AY 0.211325
-param set-default CA_ROTOR3_AZ -0.57735
-
-param set-default CA_ROTOR4_PX 0.14435
-param set-default CA_ROTOR4_PY -0.14435
-param set-default CA_ROTOR4_PZ 0.14435
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 0.788675
-param set-default CA_ROTOR4_AY 0.211325
-param set-default CA_ROTOR4_AZ -0.57735
-
-param set-default CA_ROTOR5_PX -0.14435
-param set-default CA_ROTOR5_PY -0.14435
-param set-default CA_ROTOR5_PZ 0.14435
-param set-default CA_ROTOR5_KM 0.05
-param set-default CA_ROTOR5_AX -0.211325
-param set-default CA_ROTOR5_AY 0.788675
-param set-default CA_ROTOR5_AZ 0.57735
-
-param set-default CA_ROTOR6_PX 0.14435
-param set-default CA_ROTOR6_PY 0.14435
-param set-default CA_ROTOR6_PZ 0.14435
-param set-default CA_ROTOR6_KM 0.05
-param set-default CA_ROTOR6_AX 0.211325
-param set-default CA_ROTOR6_AY -0.788675
-param set-default CA_ROTOR6_AZ 0.57735
-
-param set-default CA_ROTOR7_PX -0.14435
-param set-default CA_ROTOR7_PY 0.14435
-param set-default CA_ROTOR7_PZ 0.14435
-param set-default CA_ROTOR7_KM 0.05
-param set-default CA_ROTOR7_AX -0.788675
-param set-default CA_ROTOR7_AY -0.211325
-param set-default CA_ROTOR7_AZ -0.57735
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
-# disable MC desaturation which improves attitude tracking
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
@@ -1,14 +0,0 @@
-#!/bin/sh
-#
-# @name PX4Vision SITL
-# Holybro px4vision. Gazebo Only.
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/airframes/4016_holybro_px4vision
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name QuadrotorX SITL for SIH
-#
-# @type Quadrotor
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadx}
-
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 1
-param set-default SENS_EN_MAGSIM 1
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default EKF2_GPS_DELAY 0
-
-param set SIH_VEHICLE_TYPE 0
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL for SIH
-#
-# @type Plane
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.fw_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=airplane}
-
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 1
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 1
-
-param set-default SIH_T_MAX 6
-param set-default SIH_MASS 0.3
-param set-default SIH_IXX 0.00402
-param set-default SIH_IYY 0.0144
-param set-default SIH_IZZ 0.0177
-param set-default SIH_IXZ 0.00046
-param set-default SIH_KDV 0.2
-
-param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
-
-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-# SIH for now hardcodes this configuration which we need to match in the airframe files.
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 1
-param set-default CA_SV_CS0_TYPE 15  # single channel aileron
-param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3  # elevator
-param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4  # rudder
-
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 202
-param set-default PWM_MAIN_FUNC3 203
-param set-default PWM_MAIN_FUNC4 101
-
-param set-default EKF2_GPS_DELAY 0
@@ -1,66 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type VTOL
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
-
-param set-default EKF2_GPS_DELAY 0
-param set-default EKF2_FUSE_BETA 0 # side slip fusion is currently not supported for tailsitters
-
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 1
-param set-default SENS_EN_MAGSIM 1
-
-param set-default VT_B_TRANS_DUR 5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 0
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_S_Y 0.3
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default MAV_TYPE 19
-
-param set-default SIH_T_MAX 2
-param set-default SIH_Q_MAX 0.0165
-param set-default SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set-default SIH_IXX 0.00354
-param set-default SIH_IYY 0.000625
-param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0
-param set-default SIH_KDV 0.2
-param set-default SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set-default SIH_VEHICLE_TYPE 2
-
-param set-default CA_AIRFRAME 4
-
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR1_KM 0.05
-
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS0_TRQ_P 0.5
-param set-default CA_SV_CS0_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 6
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_Y 0.5
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC5 201
-param set-default PWM_MAIN_FUNC6 202
@@ -1,96 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Standard VTOL
-#
-# @type Simulation
-# @class VTOL
-#
-# @output Motor1 MC motor front right
-# @output Motor2 MC motor back left
-# @output Motor3 MC motor front left
-# @output Motor4 MC motor back right
-# @output Motor5 Forward thrust motor
-# @output Servo1 Ailerons (single channel)
-# @output Servo2 Elevator
-# @output Servo3 Rudder
-#
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=standard_vtol}
-
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 1
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 1
-
-param set-default EKF2_GPS_DELAY 0
-
-param set-default VT_TYPE 2
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR0_PX 0.2
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_PX -0.2
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_ROTOR2_PX 0.2
-param set-default CA_ROTOR2_PY -0.2
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.2
-param set-default CA_ROTOR3_PY 0.2
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_PX -0.3
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-
-# SIH for now hardcodes this configuration which we need to match in the airframe files.
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 1
-param set-default CA_SV_CS0_TYPE 15  # single channel aileron
-param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3  # elevator
-param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4  # rudder
-
-param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 10
-param set-default FW_AIRSPD_MAX 12
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 201
-param set-default PWM_MAIN_FUNC6 202
-param set-default PWM_MAIN_FUNC7 203
-param set-default PWM_MAIN_FUNC8 105
-
-param set-default MAV_TYPE 22
-
-# set SYS_HITL to 2 to start the SIH and avoid sensors startup
-# param set-default SYS_HITL 2
-
-param set-default SENS_DPRES_OFF 0.001
-
-param set SIH_T_MAX 2.0
-param set SIH_Q_MAX 0.0165
-param set SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set SIH_IXX 0.00354
-param set SIH_IYY 0.000625
-param set SIH_IZZ 0.00300
-param set SIH_IXZ 0
-param set SIH_KDV 0.2
-param set SIH_L_ROLL 0.2
-
-# sih as standard vtol
-param set SIH_VEHICLE_TYPE 3
@@ -1,51 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_HGT_REF 0
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-param set-default EKF2_OF_CTRL 1
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-# Commander
-# param set-default COM_HOME_EN 0 # Disable setting of home position
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 15
-param set-default SENS_FLOW_MAXR 2.5
@@ -1,3 +0,0 @@
-
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s DISTANCE_SENSOR -u $udp_gcs_port_local
@@ -1,38 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default LPE_FUSION 242
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Vision)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10015_gazebo-classic_iris
-
-# EKF2: Vision position and heading, no GPS
-param set-default EKF2_EV_DELAY 5
-param set-default EKF2_EV_CTRL 15
-param set-default EKF2_HGT_REF 3
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Vision + baro
-param set-default LPE_FUSION 132
-
-# AEQ: External heading set to use vision input
-param set-default ATT_EXT_HDG_M 1
@@ -1,3 +0,0 @@
-
-# shellcheck disable=SC2154
-mavlink stream -r 30 -s ODOMETRY -u $udp_gcs_port_local
@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor with a depth camera (forward-facing)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10015_gazebo-classic_iris
@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor with a depth camera (downward-facing)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10015_gazebo-classic_iris
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_OF_CTRL 1
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7
@@ -1,43 +0,0 @@
-#!/bin/sh
-#
-# @name Hippocampus UUV
-#
-
-. ${R}etc/init.d/rc.uuv_defaults
-
-param set-default CA_AIRFRAME 7
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY 0
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY -0.3
-param set-default CA_ROTOR0_PZ -0.3
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 0
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY 0.3
-param set-default CA_ROTOR1_PZ -0.3
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 0
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX 0
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.3
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY 0
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX 0
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.3
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -1,63 +0,0 @@
-#!/bin/sh
-#
-# @name BlueROV2 Heavy Configuration
-#
-
-. ${R}etc/init.d/rc.uuv_defaults
-
-param set-default CA_AIRFRAME 7
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY -1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.3
-param set-default CA_ROTOR0_PZ 0.2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0.5
-param set-default CA_ROTOR1_PY -0.3
-param set-default CA_ROTOR1_PZ 0.2
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.2
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY -1
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.2
-param set-default CA_ROTOR4_AZ -1
-param set-default CA_ROTOR4_KM 0
-param set-default CA_ROTOR4_PX 0.5
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR5_AZ 1
-param set-default CA_ROTOR5_KM 0
-param set-default CA_ROTOR5_PX 0.5
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR6_AZ 1
-param set-default CA_ROTOR6_KM 0
-param set-default CA_ROTOR6_PX -0.5
-param set-default CA_ROTOR6_PY 0.5
-param set-default CA_ROTOR7_KM 0
-param set-default CA_ROTOR7_PX -0.5
-param set-default CA_ROTOR7_PY -0.5
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
@@ -1,70 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_ANG 8
-
-param set-default NPFG_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-
-
-param set-default FW_LND_ANG 8
-
-param set-default NPFG_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4
@@ -1 +0,0 @@
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
@@ -1,72 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LAUN_DETCN_ON 1
-param set-default FW_THR_IDLE 0.1 # needs to be running before throw as that's how gazebo detects arming
-param set-default FW_LAUN_AC_THLD 10
-
-param set-default FW_LND_ANG 8
-
-param set-default NPFG_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,57 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default NPFG_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 20
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-param set-default RWTO_PSP 8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,57 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default NPFG_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 20
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-param set-default RWTO_PSP 8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,56 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-
-
-param set-default FW_LND_ANG 8
-
-param set-default FW_P_TC 0.5
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.7
-param set-default FW_RR_FF 0.20
-param set-default FW_RR_I 0.02
-param set-default FW_RR_P 0.22
-
-param set-default NPFG_PERIOD 12
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,57 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default NPFG_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 20
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-param set-default RWTO_PSP 8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-
-
-param set-default FW_LND_ANG 8
-
-param set-default NPFG_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.2
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_ALT_TC 2
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Roman	f13bbacd52	mc_att_control: copy sensor_correction topic once initially Signed-off-by: Roman <bapstroman@gmail.com>	2018-11-12 21:00:28 -05:00
Daniel Agar	82aa24adfc	tap_esc increase stack 1100 -> 1180 bytes	2018-10-19 20:11:14 -04:00
Daniel Agar	a7969de738	cmake fix BUILD_URI	2018-10-19 20:11:14 -04:00
Daniel Agar	33e86d25b9	FMU relocate MOT_SLEW_MAX and THR_MDL_FAC parameters centrally	2018-10-19 20:11:14 -04:00
Daniel Agar	805dfc4312	PWM parameters centralize under sensors and add aux 7&8	2018-10-19 20:11:14 -04:00
Daniel Agar	ab2d595224	FMU PWM parameters respect instance for MAIN/AUX usage	2018-10-19 20:11:14 -04:00
Philipp Oettershagen	ab044e274d	Navigator: Fix fixed-wing first order altitude hold (#9850 ) i.e. the altitude reference oscillations caused by it in LOITER mode	2018-10-19 20:11:14 -04:00
Daniel Agar	b0f766d90e	mavlink MOUNT_ORIENTATION use math::degrees	2018-10-19 20:11:14 -04:00
Daniel Agar	2bb9d7e91f	mavlink properly wrap heading fields - fixes #9867	2018-10-19 20:11:14 -04:00
Beat Küng	5f8c08db79	mavlink_ulog: clear potential existing ulog_stream messages on start - the uorb behavior got recently changed so that we now need to clear any potential existing messages when we start log streaming. - ulog_stream_ack should also not use a queue, since the ack is done synchonous between mavlink and the logger.	2018-09-13 12:56:00 +02:00
DanielePettenuzzo	a936dc291e	airspeed drivers: add PX4_I2C_BUS_ONBOARD as possible bus	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	42dc2bd890	rc.sensors: look for airspeed sensors on all busses	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	9d878c719d	ets_airspeed: add -a flag to scan all i2c busses during start	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	649d4be185	sdp3x_airspeed: add -a flag to scan all i2c busses during start	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	bec74085f1	ms5525_airspeed: add -a flag to scan all i2c busses during start	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	350df41e42	ms4525_airspeed: remove i2c_bus parameter from start function (it tries all busses)	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	95295b30e8	ms4525_airspeed: change start_bus from bool to int	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	dd044ed4be	ms4525_airspeed: remove PX4_I2C_ALL	2018-08-03 13:41:56 +02:00
DanielePettenuzzo	9b2e32c976	ms4525_airspeed: add -a flag to scan all i2c busses during start	2018-08-03 13:41:56 +02:00
Roman	e1bca8d01a	mavlink: fixed nullptr dereferencing in case unknown mavlink message is forwarded Signed-off-by: Roman <bapstroman@gmail.com>	2018-08-02 15:09:03 +02:00
				`@@ -1 +0,0 @@`
				`mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p`