migrate remaining sprintf usage -> snprintf

2026-05-24 15:07:34 +08:00 · 2022-12-06 21:09:02 -05:00
1231 changed files with 25842 additions and 78114 deletions
@@ -9,10 +9,10 @@ pipeline {
        script {
          def build_nodes = [:]
          def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2022-08-12",
-            arm64: "px4io/px4-dev-aarch64:2022-08-12",
-            base: "px4io/px4-dev-ros2-foxy:2022-08-12",
-            nuttx: "px4io/px4-dev-nuttx-focal:2022-08-12",
+            armhf: "px4io/px4-dev-armhf:2021-09-08",
+            arm64: "px4io/px4-dev-aarch64:2021-09-08",
+            base: "px4io/px4-dev-base-bionic:2021-09-08",
+            nuttx: "px4io/px4-dev-nuttx-focal:2021-09-08",
          ]

          def armhf_builds = [
@@ -684,7 +684,7 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'

  // status commands
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
@@ -715,7 +715,7 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -755,11 +755,9 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
@@ -769,13 +767,13 @@ void runTests() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
@@ -54,7 +54,6 @@ jobs:
          nxp_fmuk66-e,
          nxp_fmuk66-v3,
          nxp_fmurt1062-v1,
-          nxp_mr-canhubk3,
          nxp_ucans32k146,
          omnibus_f4sd,
          px4_fmu-v2,
@@ -59,13 +59,13 @@ jobs:
      run: |
          export
          ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
+    - name: Build PX4 and sitl_gazebo
      env:
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
      run: |
        ccache -z
        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
+        make px4_sitl_default sitl_gazebo
        ccache -s

    - name: Core dump settings
@@ -54,13 +54,13 @@ jobs:
      run: |
          export
          ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
+    - name: Build PX4 and sitl_gazebo
      env:
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
      run: |
        ccache -z
        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
+        make px4_sitl_default sitl_gazebo
        ccache -s

    - name: Core dump settings
@@ -16,7 +16,7 @@ jobs:
      matrix:
        config:
          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
-          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
+          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich

@@ -74,14 +74,14 @@ jobs:
    - name: Build SITL Gazebo
      env:
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: make px4_sitl_default sitl_gazebo-classic
-    - name: ccache post-run sitl_gazebo-classic
+      run: make px4_sitl_default sitl_gazebo
+    - name: ccache post-run sitl_gazebo
      run: ccache -s
    - name: Build MAVSDK tests
      env:
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
        DONT_RUN: 1
-      run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
+      run: make px4_sitl_default gazebo mavsdk_tests
    - name: ccache post-run mavsdk_tests
      run: ccache -s

@@ -47,6 +47,8 @@ GTAGS
 *.files
 *.includes

+Tools/jlink-nuttx.so
+
 # CLion ignores
 .idea
 cmake-build-*/
@@ -10,9 +10,9 @@
 	path = Tools/simulation/jmavsim/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
 	branch = main
-[submodule "Tools/simulation/gazebo-classic/sitl_gazebo-classic"]
-	path = Tools/simulation/gazebo-classic/sitl_gazebo-classic
-	url = https://github.com/PX4/PX4-SITL_gazebo-classic.git
+[submodule "Tools/simulation/gazebo/sitl_gazebo"]
+	path = Tools/simulation/gazebo/sitl_gazebo
+	url = https://github.com/PX4/PX4-SITL_gazebo.git
 	branch = main
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
@@ -4,7 +4,6 @@ compile_commands.json

 # generated by cmake
 launch.json
-c_cpp_properties.json

 # C/C++ extension does some local caching in this folder
 ipch/
@@ -3,18 +3,14 @@
        {
            "name": "PX4",
            "includePath": [
-                "${workspaceFolder}/**",
+                "${workspaceFolder}/**"
            ],
            "defines": [],
            "macFrameworkPath": [],
            "configurationProvider": "ms-vscode.cmake-tools",
            "cppStandard": "c++14",
-            "cStandard": "c11",
-            "forcedInclude": [
-                 "@PX4_BINARY_DIR@/px4_boardconfig.h",
-                 "@PX4_SOURCE_DIR@/platforms/common/include/px4_platform_common/defines.h"
-                 ]
+            "cStandard": "c11"
        }
    ],
    "version": 4
-}
+}
@@ -266,16 +266,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: nxp_fmuk66-v3_default
-    nxp_mr-canhubk3_default:
-      short: nxp_mr-canhubk3_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-canhubk3_default
-    nxp_mr-canhubk3_fmu:
-      short: nxp_mr-canhubk3_fmu
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-canhubk3_fmu
    raspberrypi_pico_default:
      short: raspberrypi_pico
      buildType: MinSizeRel
@@ -119,9 +119,7 @@
                "utility": "cpp",
                "valarray": "cpp",
                "variant": "cpp",
-                "vector": "cpp",
-                "Jenkinsfile*": "groovy",
-                "*.sdf": "xml"
+                "vector": "cpp"
        },
        "search.exclude": {
                "${workspaceFolder}/build": true
@@ -135,5 +133,6 @@
        "workbench.settings.enableNaturalLanguageSearch": false,
        "yaml.schemas": {
                "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
-        }
+        },
+        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
 }
@@ -49,6 +49,49 @@
                "group": "test"
            }
        },
+        {
+            "label": "jmavsim build",
+            "type": "shell",
+            "command": "ant create_run_jar copy_res",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim"
+            },
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": []
+        },
+        {
+            "label": "jmavsim",
+            "type": "shell",
+            "dependsOn": "jmavsim build",
+            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
+            "options": {
+                "cwd": "${workspaceFolder}/Tools/simulation/jmavsim/jMAVSim/out/production",
+                "env": {
+                    "PX4_SIM_SPEED_FACTOR": "1"
+                }
+            },
+            "isBackground": true,
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": []
+        },
        {
            "label": "jmavsim kill",
            "type": "shell",
@@ -67,9 +110,9 @@
            "dependsOn":["px4_sitl_cleanup"]
        },
        {
-            "label": "gazebo-classic build",
+            "label": "gazebo build",
            "type": "shell",
-            "command": "make px4_sitl_default sitl_gazebo-classic",
+            "command": "make px4_sitl_default sitl_gazebo",
            "options": {
                "cwd": "${workspaceFolder}"
            },
@@ -86,18 +129,18 @@
            "problemMatcher": [],
        },
        {
-            "label": "gazebo-classic start",
+            "label": "gazebo start",
            "type": "shell",
-            "dependsOn": "gazebo-classic build",
+            "dependsOn": "gazebo build",
            "options": {
                "cwd": "${workspaceFolder}",
                "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo-classic",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/empty.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/empty.world",
            "isBackground": true,
            "presentation": {
                "echo": true,
@@ -128,18 +171,18 @@
            ]
        },
        {
-            "label": "gazebo-classic",
+            "label": "gazebo",
            "type": "shell",
-            "dependsOn": "gazebo-classic start",
+            "dependsOn": "gazebo start",
            "options": {
                "cwd": "${workspaceFolder}",
                "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo-classic",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models",
+                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/iris/iris.sdf --model-name=iris -x 1.01 -y 0.98 -z 0.83",
            "isBackground": false,
            "presentation": {
                "echo": true,
@@ -194,7 +237,7 @@
            "dependsOn":["ign gazebo kill"]
        },
        {
-            "label": "gazebo-classic kill",
+            "label": "gazebo kill",
            "type": "shell",
            "command": "pkill -9 -f gzserver || true",
            "presentation": {
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2019 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -118,21 +118,7 @@ execute_process(
 	OUTPUT_STRIP_TRAILING_WHITESPACE
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	)
-
-# git describe to X.Y.Z version
-string(REPLACE "." ";" VERSION_LIST ${PX4_GIT_TAG})
-
-# major version
-list(GET VERSION_LIST 0 PX4_VERSION_MAJOR)
-string(REPLACE "v" "" PX4_VERSION_MAJOR ${PX4_VERSION_MAJOR})
-# minor version
-list(GET VERSION_LIST 1 PX4_VERSION_MINOR)
-# patch version
-list(GET VERSION_LIST 2 PX4_VERSION_PATCH)
-string(REPLACE "-" ";" PX4_VERSION_PATCH ${PX4_VERSION_PATCH})
-list(GET PX4_VERSION_PATCH 0 PX4_VERSION_PATCH)
-
-message(STATUS "PX4 version: ${PX4_GIT_TAG} (${PX4_VERSION_MAJOR}.${PX4_VERSION_MINOR}.${PX4_VERSION_PATCH})")
+message(STATUS "PX4 version: ${PX4_GIT_TAG}")

 define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 BRIEF_DOCS "PX4 module libs"
@@ -157,17 +143,25 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
 # configuration
 #

+set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
+
 include(px4_add_module)
 set(config_module_list)
 set(config_kernel_list)

 # Find Python
-find_package(PythonInterp 3)
-# We have a custom error message to tell users how to install python3.
-if(NOT PYTHONINTERP_FOUND)
-	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-		"    macOS: brew install python")
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
 endif()

 option(PYTHON_COVERAGE "Python code coverage" OFF)
@@ -213,11 +207,6 @@ if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
 	include(init)
 endif()

-#=============================================================================
-# project definition
-#
-project(px4 CXX C ASM)
-
 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
 if(NOT CMAKE_BUILD_TYPE)
 	if(${PX4_PLATFORM} STREQUAL "nuttx")
@@ -246,6 +235,11 @@ endif()
 set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage;AddressSanitizer;UndefinedBehaviorSanitizer")
 message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")

+#=============================================================================
+# project definition
+#
+project(px4 CXX C ASM)
+
 # Check if LTO option and check if toolchain supports it
 if(LTO)
    include(CheckIPOSupported)
@@ -262,9 +256,15 @@ set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
+# For the catkin build process, unset build of dynamically-linked binaries
+# and do not change CMAKE_RUNTIME_OUTPUT_DIRECTORY
+if (NOT CATKIN_DEVEL_PREFIX)
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
+	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
+else()
+	SET(BUILD_SHARED_LIBS OFF)
+endif()

 #=============================================================================

@@ -296,10 +296,7 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 	set(CMAKE_ENABLE_EXPORTS ON)

-	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
-		include(coverage)
-	endif()
-
+	include(coverage)
 	include(sanitizers)

 	# Define GNU standard installation directories
@@ -312,6 +309,21 @@ endif()

 include(ccache)

+#=============================================================================
+# find programs and packages
+#
+
+# see if catkin was invoked to build this
+if (CATKIN_DEVEL_PREFIX)
+	message(STATUS "catkin ENABLED")
+	find_package(catkin REQUIRED)
+	if (catkin_FOUND)
+		catkin_package()
+	else()
+		message(FATAL_ERROR "catkin not found")
+	endif()
+endif()
+
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -438,10 +450,10 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)

 if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-	target_link_libraries(parameters_interface INTERFACE usr_parameters)
-	target_link_libraries(kernel_parameters_interface INTERFACE parameters)
+target_link_libraries(parameters_interface INTERFACE usr_parameters)
+target_link_libraries(kernel_parameters_interface INTERFACE parameters)
 else()
-	target_link_libraries(parameters_interface INTERFACE parameters)
+target_link_libraries(parameters_interface INTERFACE parameters)
 endif()

 # firmware added last to generate the builtin for included modules
@@ -470,20 +482,21 @@ add_custom_command(OUTPUT ${uorb_graph_config}
 add_custom_target(uorb_graph DEPENDS ${uorb_graph_config})


-include(bloaty)
-
-
 include(doxygen)
 include(metadata)
 include(package)

+# print size
+add_custom_target(size
+	COMMAND size $<TARGET_FILE:px4>
+	DEPENDS px4
+	WORKING_DIRECTORY ${PX4_BINARY_DIR}
+	USES_TERMINAL
+	)
+
 # install python requirements using configured python
 add_custom_target(install_python_requirements
 	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )
-
-if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
-	include(finalize)
-endif()
@@ -17,8 +17,6 @@ menu "Toolchain"
            bool "posix"
        config PLATFORM_QURT
            bool "qurt"
-        config PLATFORM_ROS2
-            bool "ros2"
    endchoice

    config BOARD_PLATFORM
@@ -26,7 +24,6 @@ menu "Toolchain"
        default "nuttx" if PLATFORM_NUTTX
        default "posix" if PLATFORM_POSIX
        default "qurt" if PLATFORM_QURT
-        default "ros2" if PLATFORM_ROS2

    config BOARD_LOCKSTEP
        bool "Force enable lockstep"
@@ -40,8 +37,8 @@ menu "Toolchain"
        help
            forces nolockstep behaviour, despite REPLAY env variable

-    config BOARD_LINUX_TARGET
-        bool "Linux OS Target"
+    config BOARD_LINUX
+        bool "Linux OS"
        depends on PLATFORM_POSIX
        help
            Board Platform is running the Linux operating system
@@ -73,13 +70,6 @@ menu "Toolchain"
        help
            relative path to the ROMFS root directory

-    config BOARD_ROOTFSDIR
-        string "Root directory"
-        depends on PLATFORM_POSIX
-        default "."
-        help
-            Configure the root directory in the file system for PX4 files
-
    config BOARD_IO
        string "IO board name"
        default "px4_io-v2_default"
@@ -181,8 +171,8 @@ menu "Serial ports"
    config BOARD_SERIAL_WIFI
        string "WIFI tty port"

-    config BOARD_SERIAL_EXT2
-        string "EXT2 tty port"
+    config BOARD_SERIAL_PPB
+        string "PPB (Pixhawk Payload Bus) tty port"
 endmenu

 menu "drivers"
@@ -202,6 +192,5 @@ source "src/examples/Kconfig"
 endmenu

 menu "platforms"
-depends on PLATFORM_QURT || PLATFORM_POSIX
 source "platforms/common/Kconfig"
 endmenu
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2012 - 2023, PX4 Development Team
+Copyright (c) 2012 - 2022, PX4 Development Team
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -324,6 +324,10 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

+jlink-nuttx:
+	$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
+
+
 bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

@@ -388,17 +392,17 @@ tests_coverage:


 rostest: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo

 tests_integration: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 	@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
 	@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sitl.json

 tests_integration_coverage:
 	@$(MAKE) clean
 	@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 	@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
 	@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sitl.json
 	@mkdir -p coverage
@@ -408,13 +412,13 @@ tests_mission: rostest
 	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_missions.test

 rostest_run: px4_sitl_default
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo
 	@"$(SRC_DIR)"/test/rostest_px4_run.sh $(TEST_FILE) mission:=$(TEST_MISSION) vehicle:=$(TEST_VEHICLE)

 tests_mission_coverage:
 	@$(MAKE) clean
 	@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
-	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic PX4_CMAKE_BUILD_TYPE=Coverage
+	@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo PX4_CMAKE_BUILD_TYPE=Coverage
 	@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=VTOL_mission_1 vehicle:=standard_vtol
 	@$(MAKE) --no-print-directory px4_sitl_default generate_coverage

@@ -489,7 +493,7 @@ validate_module_configs:

 # Cleanup
 # --------------------------------------------------------------------
-.PHONY: clean submodulesclean submodulesupdate distclean
+.PHONY: clean submodulesclean submodulesupdate gazeboclean distclean

 clean:
 	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
@@ -507,7 +511,10 @@ submodulesupdate:
 	@git submodule update --init --recursive --jobs 4
 	@git fetch --all --tags --recurse-submodules=yes --jobs=4

-distclean:
+gazeboclean:
+	@rm -rf ~/.gazebo/*
+
+distclean: gazeboclean
 	@git submodule deinit --force $(SRC_DIR)
 	@rm -rf "$(SRC_DIR)/build"
 	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
@@ -547,14 +554,6 @@ check_px4: $(call make_list,nuttx,"px4") \
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes

-# helpers for running olddefconfig (nuttx) and px4_savedefconfig on all boards
-.PHONY: all_oldconfig all_px4_savedefconfig
-all_oldconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ oldconfig; done
-
-all_px4_savedefconfig:
-	@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ px4_savedefconfig; done
-
 .PHONY: failsafe_web run_failsafe_web_server
 failsafe_web:
 	@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL jMAVSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default EKF2_RNG_A_HMAX 10
-
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default EKF2_RNG_A_HMAX 10
+
@@ -41,3 +41,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104

 param set SIH_VEHICLE_TYPE 0
+
@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
+
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5
@@ -1,38 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start
@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (irlock)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
+
+# Start up Landing Target Estimator module
+landing_target_estimator start
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default LPE_FUSION 242
-
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (rplidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default LPE_FUSION 242
+
@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-param set-default COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
-
@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_GPS_CTRL 0
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision Velocity)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5
+param set-default EKF2_GPS_CTRL 0
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Dual GPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7
@@ -1,81 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4
@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Plane SITL with camera
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4
@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default RWTO_TKOFF 0
-
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default RWTO_TKOFF 0
+
@@ -57,3 +57,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_THR_TRIM 0.0
+param set-default RWTO_TKOFF 0
@@ -1,65 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_LND_AIRSPD_SC 1.1
-param set-default FW_LND_ANG 5
-param set-default FW_LND_FL_PMIN 9.5
-param set-default FW_LND_FL_PMAX 20
-param set-default FW_LND_FLALT 5
-
-param set-default FW_L1_PERIOD 25
-
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.45
-param set-default FW_RR_FF 0.40
-param set-default FW_RR_I 0.132
-param set-default FW_RR_P 0.085
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
-param set-default MIS_DIST_WPS 10000
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
-param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
@@ -1,93 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL
-#
-# @type Standard VTOL
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-
-param set-default FW_L1_PERIOD 12
-param set-default FW_PR_FF 0.2
-param set-default FW_PR_P 0.9
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default MC_ROLLRATE_P 0.3
-param set-default MC_YAW_P 1.6
-
-param set-default MIS_TAKEOFF_ALT 10
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_P_ACC 3
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_D_ACC 0.1
-
-param set-default NAV_ACC_RAD 5
-
-param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-param set-default VT_B_TRANS_DUR 8
-param set-default VT_TYPE 2
-
-
-# Gimbal
-param set-default PWM_MAIN_FUNC9 420
-param set-default PWM_MAIN_FUNC10 421
-param set-default PWM_MAIN_FUNC11 422
-
-param set-default RC_MAP_AUX1 8
-param set-default RC_MAP_AUX2 9
-param set-default RC_MAP_AUX3 10
-
@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d-posix/airframes/1040_standard_vtol
+
+# Gimbal
+param set-default PWM_MAIN_FUNC9 420
+param set-default PWM_MAIN_FUNC10 421
+param set-default PWM_MAIN_FUNC11 422
+
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
+
@@ -1,78 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with downward facing LIDAR.
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-param set-default PWM_MAIN_FUNC3 204
-param set-default PWM_MAIN_FUNC4 205
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 201
-param set-default PWM_MAIN_FUNC7 202
-param set-default PWM_MAIN_FUNC8 203
-param set-default PWM_MAIN_FUNC9 206
-param set-default PWM_MAIN_REV 256
-
-
-param set-default FW_LND_USETER 1
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with downward facing LIDAR.
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_LND_USETER 1
+
@@ -11,8 +11,6 @@ PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
 PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}

-param set-default SIM_GZ_EN 1
-
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 4

@@ -32,19 +30,19 @@ param set-default CA_ROTOR3_PX -0.13
 param set-default CA_ROTOR3_PY 0.20
 param set-default CA_ROTOR3_KM -0.05

-param set-default SIM_GZ_EC_FUNC1 101
-param set-default SIM_GZ_EC_FUNC2 102
-param set-default SIM_GZ_EC_FUNC3 103
-param set-default SIM_GZ_EC_FUNC4 104
+param set-default SIM_GZ_FUNC1 101
+param set-default SIM_GZ_FUNC2 102
+param set-default SIM_GZ_FUNC3 103
+param set-default SIM_GZ_FUNC4 104

-param set-default SIM_GZ_EC_MIN1 150
-param set-default SIM_GZ_EC_MIN2 150
-param set-default SIM_GZ_EC_MIN3 150
-param set-default SIM_GZ_EC_MIN4 150
+param set-default SIM_GZ_MIN1 150
+param set-default SIM_GZ_MIN2 150
+param set-default SIM_GZ_MIN3 150
+param set-default SIM_GZ_MIN4 150

-param set-default SIM_GZ_EC_MAX1 1000
-param set-default SIM_GZ_EC_MAX2 1000
-param set-default SIM_GZ_EC_MAX3 1000
-param set-default SIM_GZ_EC_MAX4 1000
+param set-default SIM_GZ_MAX1 1000
+param set-default SIM_GZ_MAX2 1000
+param set-default SIM_GZ_MAX3 1000
+param set-default SIM_GZ_MAX4 1000

 param set-default MPC_THR_HOVER 0.60
@@ -1,50 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 depth
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_depth}
-
-param set-default SIM_GZ_EN 1
-
-param set-default CA_AIRFRAME 0
-param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0.13
-param set-default CA_ROTOR0_PY 0.22
-param set-default CA_ROTOR0_KM  0.05
-
-param set-default CA_ROTOR1_PX -0.13
-param set-default CA_ROTOR1_PY -0.20
-param set-default CA_ROTOR1_KM  0.05
-
-param set-default CA_ROTOR2_PX 0.13
-param set-default CA_ROTOR2_PY -0.22
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -0.13
-param set-default CA_ROTOR3_PY 0.20
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default SIM_GZ_EC_FUNC1 101
-param set-default SIM_GZ_EC_FUNC2 102
-param set-default SIM_GZ_EC_FUNC3 103
-param set-default SIM_GZ_EC_FUNC4 104
-
-param set-default SIM_GZ_EC_MIN1 150
-param set-default SIM_GZ_EC_MIN2 150
-param set-default SIM_GZ_EC_MIN3 150
-param set-default SIM_GZ_EC_MIN4 150
-
-param set-default SIM_GZ_EC_MAX1 1000
-param set-default SIM_GZ_EC_MAX2 1000
-param set-default SIM_GZ_EC_MAX3 1000
-param set-default SIM_GZ_EC_MAX4 1000
-
-param set-default MPC_THR_HOVER 0.60
@@ -1,81 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo rc_cessna
-# @type Fixedwing
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=rc_cessna}
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-param set-default TRIM_PITCH -0.15
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-
-param set-default SIM_GZ_EC_FUNC1 101
-param set-default SIM_GZ_EC_MIN1 0
-param set-default SIM_GZ_EC_MAX1 1000
-
-param set-default SIM_GZ_SV_FUNC1 201
-param set-default SIM_GZ_SV_FUNC2 202
-param set-default SIM_GZ_SV_FUNC3 203
-param set-default SIM_GZ_SV_FUNC4 204
-param set-default SIM_GZ_SV_FUNC5 205
-param set-default SIM_GZ_SV_FUNC6 206
@@ -1,6 +1,6 @@
 ############################################################################
 #
-#   Copyright (c) 2020-2023 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -32,61 +32,54 @@
 ############################################################################

 px4_add_romfs_files(
+	10016_iris
+	10018_iris_foggy_lidar
+	10019_omnicopter
+	10030_px4vision
+	10040_quadx
+	10041_airplane
+	10042_xvert
+	1010_iris_opt_flow
+	1010_iris_opt_flow.post
+	1011_iris_irlock
+	1012_iris_rplidar
+	1013_iris_vision
+	1013_iris_vision.post
+	1015_iris_obs_avoid
+	1015_iris_obs_avoid.post
+	1017_iris_opt_flow_mockup
+	1018_iris_vision_velocity
+	1019_iris_dual_gps
+	1021_uuv_hippocampus
+	1022_uuv_bluerov2_heavy
+	1030_plane
+	1031_plane_cam
+	1032_plane_catapult
+	1033_rascal
+	1034_rascal-electric
+	1035_techpod
+	1036_malolo
+	1037_believer
+	1038_glider
+	1039_advanced_plane
+	1040_standard_vtol
+	1041_tailsitter
+	1042_tiltrotor
+	1043_standard_vtol_drop
+	1044_plane_lidar
+	1060_rover
+	1061_r1_rover
+	1062_tf-r1
+	1070_boat
+	3010_quadrotor_x
+	3011_hexarotor_x

-	1010_gazebo-classic_iris_opt_flow
-	1010_gazebo-classic_iris_opt_flow.post
-	1011_gazebo-classic_iris_irlock
-	1012_gazebo-classic_iris_rplidar
-	1013_gazebo-classic_iris_vision
-	1013_gazebo-classic_iris_vision.post
-	1015_gazebo-classic_iris_obs_avoid
-	1015_gazebo-classic_iris_obs_avoid.post
-	1017_gazebo-classic_iris_opt_flow_mockup
-	1019_gazebo-classic_iris_dual_gps
-	1021_gazebo-classic_uuv_hippocampus
-	1022_gazebo-classic_uuv_bluerov2_heavy
-	1030_gazebo-classic_plane
-	1031_gazebo-classic_plane_cam
-	1032_gazebo-classic_plane_catapult
-	1033_jsbsim_rascal
-	1034_flightgear_rascal-electric
-	1035_gazebo-classic_techpod
-	1036_jsbsim_malolo
-	1037_gazebo-classic_believer
-	1038_gazebo-classic_glider
-	1039_gazebo-classic_advanced_plane
-	1040_gazebo-classic_standard_vtol
-	1041_gazebo-classic_tailsitter
-	1042_gazebo-classic_tiltrotor
-	1043_gazebo-classic_standard_vtol_drop
-	1044_gazebo-classic_plane_lidar
-	1060_gazebo-classic_rover
-	1061_gazebo-classic_r1_rover
-	1062_flightgear_tf-r1
-	1070_gazebo-classic_boat
+	4001_x500

-	2507_gazebo-classic_cloudship
+	17001_tf-g1
+	17002_tf-g2
+	2507_cloudship

-	3010_jsbsim_quadrotor_x
-	3011_jsbsim_hexarotor_x
-
-	4001_gz_x500
-	4002_gz_x500_depth
-	4003_gz_rc_cessna
-
-	6011_gazebo-classic_typhoon_h480
-	6011_gazebo-classic_typhoon_h480.post
-
-	10016_gazebo-classic_iris
-	10017_jmavsim_iris
-	10018_gazebo-classic_iris_foggy_lidar
-	10019_gazebo-classic_omnicopter
-	10030_gazebo-classic_px4vision
-
-	10040_sihsim_quadx
-	10041_sihsim_airplane
-	10042_sihsim_xvert
-
-	17001_flightgear_tf-g1
-	17002_flightgear_tf-g2
+	6011_typhoon_h480
+	6011_typhoon_h480.post
 )
@@ -3,7 +3,7 @@

 udp_offboard_port_local=$((14580+px4_instance))
 udp_offboard_port_remote=$((14540+px4_instance))
-[ "$px4_instance" -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
+[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
 udp_onboard_payload_port_local=$((14280+px4_instance))
 udp_onboard_payload_port_remote=$((14030+px4_instance))
 udp_onboard_gimbal_port_local=$((13030+px4_instance))
@@ -6,8 +6,6 @@ param set-default IMU_INTEG_RATE 250

 if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then

-	echo "INFO  [init] SIH simulator"
-
 	if simulator_sih start; then

 		sensor_baro_sim start
@@ -15,123 +13,111 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		sensor_mag_sim start

 	else
-		echo "ERROR [init] simulator_sih failed to start"
+		echo "ERROR  [init] simulator_sih failed to start"
 		exit 1
 	fi

-elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" -eq "1" ]; then
+elif [ "$PX4_SIMULATOR" = "gz" ]; then

-	# source generated gz_env.sh for GZ_SIM_RESOURCE_PATH
-	if [ -f ./gz_env.sh ]; then
-		. ./gz_env.sh
-
-	elif [ -f ../gz_env.sh ]; then
-		. ../gz_env.sh
+	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
+	if [ -f gazebo_env.sh ]; then
+		. ./gazebo_env.sh
+	elif [ -f ../gazebo_env.sh ]; then
+		. ../gazebo_env.sh
 	fi

-	# "gz sim" only avaiilable in Garden and later
-	GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
-	if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
-	then
-		# "gz sim" from Garden on
-		gz_command="gz"
-		gz_sub_command="sim"
-	else
-		echo "ERROR [init] Gazebo gz please install gz-garden"
-		exit 1
-	fi
-
-	# look for running ${gz_command} gazebo world
-	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-
-	# shellcheck disable=SC2153
-	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
-
-		echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
-
-		${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
-
-		if [ -z "${HEADLESS}" ]; then
-			# HEADLESS not set, starting gui
-			${gz_command} ${gz_sub_command} -g &
+# shellcheck disable=SC2236
+	if [ ! -z $PX4_GZ_VERBOSE ]; then
+		if [ "$PX4_GZ_VERBOSE" -le "4" ] && [ "$PX4_GZ_VERBOSE" -ge "1" ]; then
+			gz_verbose=$PX4_GZ_VERBOSE
+		else
+			gz_verbose=4
+			echo "WARN  [init] PX4_GZ_VERBOSE was passed: $PX4_GZ_VERBOSE, not in range [1,4], defaulting to: $gz_verbose."
 		fi
-
+		echo "INFO  [init] PX4_GZ_VERBOSE set to $gz_verbose."
 	else
-		echo "INFO  [init] gazebo already running world: ${gz_world}"
-		PX4_GZ_WORLD=${gz_world}
+		gz_verbose=1
+		echo "INFO  [init] PX4_GZ_VERBOSE not explicitly set, defaulting to: $gz_verbose."
 	fi

-	# start gz_bridge
-	if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
-		# model specified, gz_bridge will spawn model
+	gz_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
+	
+	gz_version_major=$( ign gazebo --versions | sed 's/\..*//g' )
+	gz_version_minor=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/\..*//g' )
+	gz_version_point=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/'"${gz_version_minor}"\.'//')

-		if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
+	if [ "$gz_version_major" -gt "6" ] || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -gt "12" ]; } || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -eq "12" ] && [ "$gz_version_point" -gt "0" ]; }; then
+		echo "INFO  [init] using latest version of MultiCopterMotor plugin."
+	else
+		echo "WARN  [init] using older version of MultiCopterMotor plugin, please update to latest gazebo > 6.12.0."
+		if [ "$PX4_SIM_MODEL" = "x500" ]; then
+			PX4_SIM_MODEL="x500-Legacy"
+			echo "WARN  [init] setting PX4_SIM_MODEL -> $PX4_SIM_MODEL from x500 till gazebo > 6.12.0"
+		fi
+	fi
+
+	if [ -z $gz_world ]; then
+
+		# starting ign gazebo with ${PX4_GZ_WORLD} world
+		echo "INFO  [init] starting ign gazebo"
+# shellcheck disable=SC2153
+		ign gazebo --verbose=$gz_verbose -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
+
+		if [ -z $HEADLESS ]; then
+			# HEADLESS not set, starting ign gazebo gui
+			ign gazebo -g &
+		fi
+	else
+		echo "INFO  [init] ign gazebo already running world: $gz_world"
+		PX4_GZ_WORLD=$gz_world
+	fi
+
+# shellcheck disable=SC2236
+	if [ ! -z $PX4_GZ_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ]; then
+
+# shellcheck disable=SC2236
+		if [ ! -z $PX4_GZ_MODEL_POSE ]; then
 			# Clean potential input line formatting.
-			model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
+			model_pose="$( echo ${PX4_GZ_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
 			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
-
 		else
 			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
 			model_pose="0,0,0,0,0,0"
 		fi
-
 		# start gz bridge with pose arg.
-		if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+		if gz_bridge start -p "${model_pose}"  -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
-
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi
-
-	elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
-		# model name specificed, gz_bridge will attach to existing model
-
+	elif [ ! -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
 		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
-
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi
-
-	elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
-
+	elif [ ! -z $PX4_SIM_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
 		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
-
-		if gz_bridge start -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
-
 		else
-			echo "ERROR [init] gz_bridge failed to start"
+			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi

 	else
-		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
+		echo "ERROR  [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
 		exit 1
 	fi

-elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then
-
-	echo "INFO  [init] jMAVSim simulator"
-
-	if jps | grep -i jmavsim; then
-		kill "$(jps | grep -i jmavsim | awk '{print $1}')" || true
-		sleep 1
-	fi
-
-	param set IMU_INTEG_RATE 250
-	./jmavsim_run.sh -l -r 250 &
-
-	simulator_mavlink start -h localhost $((4560+px4_instance))
-
 else
 	# otherwise start simulator (mavlink) module
 	simulator_tcp_port=$((4560+px4_instance))
@@ -142,16 +128,16 @@ else
 	if [ -z "${PX4_SIM_HOSTNAME}" ]; then

 		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-			echo "INFO  [init] PX4_SIM_HOSTNAME: localhost"
+			echo "PX4 SIM HOST: localhost"
 			simulator_mavlink start -c $simulator_tcp_port
 		else
-			echo "INFO  [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOST_ADDR}"
-			simulator_mavlink start -t "${PX4_SIM_HOST_ADDR}" "${simulator_tcp_port}"
+			echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
 		fi

 	else
-		echo "INFO  [init] PX4_SIM_HOSTNAME: ${PX4_SIM_HOSTNAME}"
-		simulator_mavlink start -h "${PX4_SIM_HOSTNAME}" "${simulator_tcp_port}"
+		echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
 	fi

 fi
@@ -74,7 +74,7 @@ if [ -f $PARAM_FILE ]; then
 	then
 		echo "ERROR [init] param import failed"

-		bsondump $PARAM_FILE
+		param dump $PARAM_FILE

 		# try to make a backup copy
 		cp $PARAM_FILE param_import_fail.bson
@@ -85,7 +85,7 @@ if [ -f $PARAM_FILE ]; then
 			echo "[init] importing from parameter backup"

 			# dump current backup file contents for comparison
-			bsondump $PARAM_BACKUP_FILE
+			param dump $PARAM_BACKUP_FILE

 			param import $PARAM_BACKUP_FILE

@@ -142,9 +142,7 @@ then
 	param set CAL_GYRO2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION

 	param set CAL_MAG0_ID 197388
-	param set CAL_MAG0_PRIO 50
 	param set CAL_MAG1_ID 197644
-	param set CAL_MAG1_PRIO 50

 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
@@ -262,19 +260,7 @@ fi
 navigator start

 # Try to start the microdds_client with UDP transport if module exists
-microdds_ns=""
-if [ "$px4_instance" -ne "0" ]
-then
-	# Assign new xrce dds key based on instance number and set default namespace
-	param set XRCE_DDS_KEY ${px4_instance}
-	microdds_ns="-n px4_$px4_instance"
-fi
-if [ -n "$PX4_MICRODDS_NS" ]
-then
-	# Override namespace if environment variable is defined
-	microdds_ns="-n $PX4_MICRODDS_NS"
-fi
-microdds_client start -t udp -p 8888 $microdds_ns
+microdds_client start -t udp -p 8888

 if param greater -s MNT_MODE_IN -1
 then
@@ -18,7 +18,6 @@ control_allocator start
 #
 # Start attitude controller.
 #
-fw_rate_control start
 fw_att_control start
 fw_pos_control_l1 start
 airspeed_selector start
@@ -23,12 +23,6 @@ then
 	set LOGGER_ARGS "${LOGGER_ARGS} -x"
 fi

-if param compare SDLOG_MODE 4
-then
-	set LOGGER_ARGS "${LOGGER_ARGS} -a"
-fi
-
-
 if ! param compare SDLOG_MODE -1
 then
 	logger start -b ${LOGGER_BUF} -t ${LOGGER_ARGS}
@@ -101,24 +101,12 @@ then
 	pmw3901 -S start
 fi

-# vl53l0x i2c distance sensor
-if param compare -s SENS_EN_VL53L0X 1
-then
-	vl53l0x start -X
-fi
-
 # vl53l1x i2c distance sensor
 if param compare -s SENS_EN_VL53L1X 1
 then
 	vl53l1x start -X
 fi

-# tf02 pro i2c distance sensor
-if param compare -s SENS_EN_TF02PRO 1
-then
-	tf02pro start -X
-fi
-
 # ADIS16448 spi external IMU
 if param compare -s SENS_EN_ADIS164X 1
 then
@@ -35,7 +35,6 @@ then
 	mc_autotune_attitude_control start
 fi

-fw_rate_control start vtol
 fw_att_control start vtol
 fw_pos_control_l1 start vtol
 fw_autotune_attitude_control start vtol
@@ -130,7 +130,7 @@ else
 		echo "ERROR [init] param import failed"
 		set STARTUP_TUNE 2 # tune 2 = ERROR_TUNE

-		bsondump $PARAM_FILE
+		param dump $PARAM_FILE

 		if [ -d "/fs/microsd" ]
 		then
@@ -143,7 +143,7 @@ else
 				echo "[init] importing from parameter backup"

 				# dump current backup file contents for comparison
-				bsondump $PARAM_BACKUP_FILE
+				param dump $PARAM_BACKUP_FILE

 				param import $PARAM_BACKUP_FILE

@@ -350,7 +350,6 @@ else
 			simulator_sih start
 			sensor_baro_sim start
 			sensor_mag_sim start
-			sensor_gps_sim start
 		fi

 	else
@@ -43,21 +43,18 @@ do
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param reset SYS_HITL'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param save'
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/mtd_params'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump'

 	${DIR}/reboot.py --device ${SERIAL_DEVICE}

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/mtd_params' || true
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/microsd/parameters_backup.bson' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'ps'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'work_queue status'

-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'mavlink status' || true
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'mavlink stop-all'
-
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'gps status' || true
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'gps stop'

 done
@@ -10,7 +10,6 @@ fi
 exec find boards msg src platforms test \
    -path platforms/nuttx/NuttX -prune -o \
    -path platforms/qurt/dspal -prune -o \
-    -path src/drivers/ins/vectornav/libvnc -prune -o \
    -path src/drivers/uavcan/libuavcan -prune -o \
    -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
    -path src/drivers/cyphal/libcanard -prune -o \
@@ -28,7 +28,7 @@ args = parser.parse_args()
 verbose = args.verbose

 build_configs = []
-excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
+excluded_boards = ['modalai_voxl2']  # TODO: fix and enable
 excluded_manufacturers = ['atlflight']
 excluded_platforms = ['qurt']
 excluded_labels = [
@@ -15,7 +15,7 @@ class ModuleDocumentation(object):
    # TOC in https://github.com/PX4/PX4-user_guide/blob/main/en/SUMMARY.md
    valid_categories = ['driver', 'estimator', 'controller', 'system',
                        'communication', 'command', 'template', 'simulation', 'autotune']
-    valid_subcategories = ['', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
+    valid_subcategories = ['', 'distance_sensor', 'imu', 'airspeed_sensor',
                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']

    max_line_length = 80 # wrap lines that are longer than this
@@ -136,9 +136,9 @@ serial_ports = {
        "default_baudrate": 1, # set default to an unusable value to detect that this serial port has not been configured
        },

-    # EXT2
-    "EXT2": {
-        "label": "EXT2",
+    # Pixhawk Payload Bus
+    "PPB": {
+        "label": "Pixhawk Payload Bus",
        "index": 401,
        "default_baudrate": 57600,
        },
@@ -14,6 +14,7 @@ set -e
 INSTALL_NUTTX="true"
 INSTALL_SIM="true"
 INSTALL_ARCH=`uname -m`
+INSTALL_SIM_JAMMY="false"

 # Parse arguments
 for arg in "$@"
@@ -25,6 +26,11 @@ do
 	if [[ $arg == "--no-sim-tools" ]]; then
 		INSTALL_SIM="false"
 	fi
+
+	if [[ $arg == "--sim_jammy" ]]; then
+		INSTALL_SIM_JAMMY="true"
+	fi
+
 done

 # detect if running in docker
@@ -65,7 +71,9 @@ elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
 elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-	echo "Ubuntu 22.04"
+	echo "Ubuntu 22.04, simulation build off by default." 
+	echo "Use --sim_jammy to enable simulation build."
+	INSTALL_SIM=$INSTALL_SIM_JAMMY
 fi


@@ -217,7 +225,7 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	# Set Java 11 as default
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")

-	# Install Gazebo classic
+	# Gazebo
 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		gazebo_version=9
 		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
@@ -254,17 +262,6 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		# fix VMWare 3D graphics acceleration for gazebo
 		echo "export SVGA_VGPU10=0" >> ~/.profile
 	fi
-
-	# Install Gazebo
-	if [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
-		wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
-		# Update list, since new gazebo-stable.list has been added
-		sudo apt-get update -y --quiet
-		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-			ignition-fortress \
-			;
-	fi
 fi

 if [[ $INSTALL_NUTTX == "true" ]]; then
@@ -22,7 +22,7 @@ echo build_path: $build_path
 rootfs="$build_path/rootfs" # this is the working directory
 mkdir -p "$rootfs"

-export PX4_SIM_MODEL=flightgear_${model}
+export PX4_SIM_MODEL=${model}

 echo "FG setup"
 cd "${src_path}/Tools/simulation/flightgear/flightgear_bridge/"
@@ -16,9 +16,9 @@ SRC_DIR=$1
 BUILD_DIR=$2

 # setup Gazebo env and update package path
-export GAZEBO_PLUGIN_PATH=$GAZEBO_PLUGIN_PATH:${BUILD_DIR}/build_gazebo-classic
-export GAZEBO_MODEL_PATH=$GAZEBO_MODEL_PATH:${SRC_DIR}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${BUILD_DIR}/build_gazebo-classic
+export GAZEBO_PLUGIN_PATH=$GAZEBO_PLUGIN_PATH:${BUILD_DIR}/build_gazebo
+export GAZEBO_MODEL_PATH=$GAZEBO_MODEL_PATH:${SRC_DIR}/Tools/simulation/gazebo/sitl_gazebo/models
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${BUILD_DIR}/build_gazebo

 echo -e "GAZEBO_PLUGIN_PATH $GAZEBO_PLUGIN_PATH"
 echo -e "GAZEBO_MODEL_PATH $GAZEBO_MODEL_PATH"
@@ -1,10 +1,10 @@
 #!/bin/bash
 # run multiple instances of the 'px4' binary, with the gazebo SITL simulation
-# It assumes px4 is already built, with 'make px4_sitl_default sitl_gazebo-classic'
+# It assumes px4 is already built, with 'make px4_sitl_default gazebo'

 # The simulator is expected to send to TCP port 4560+i for i in [0, N-1]
 # For example gazebo can be run like this:
-#./Tools/simulation/gazebo-classic/sitl_multiple_run.sh -n 10 -m iris
+#./Tools/simulation/gazebo/sitl_multiple_run.sh -n 10 -m iris

 function cleanup() {
 	pkill -x px4
@@ -35,7 +35,7 @@ function spawn_model() {
 	pushd "$working_dir" &>/dev/null
 	echo "starting instance $N in $(pwd)"
 	$build_path/bin/px4 -i $N -d "$build_path/etc" >out.log 2>err.log &
-	python3 ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/scripts/jinja_gen.py ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models/${MODEL}/${MODEL}.sdf.jinja ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic --mavlink_tcp_port $((4560+${N})) --mavlink_udp_port $((14560+${N})) --mavlink_id $((1+${N})) --gst_udp_port $((5600+${N})) --video_uri $((5600+${N})) --mavlink_cam_udp_port $((14530+${N})) --output-file /tmp/${MODEL}_${N}.sdf
+	python3 ${src_path}/Tools/simulation/gazebo/sitl_gazebo/scripts/jinja_gen.py ${src_path}/Tools/simulation/gazebo/sitl_gazebo/models/${MODEL}/${MODEL}.sdf.jinja ${src_path}/Tools/simulation/gazebo/sitl_gazebo --mavlink_tcp_port $((4560+${N})) --mavlink_udp_port $((14560+${N})) --mavlink_id $((1+${N})) --gst_udp_port $((5600+${N})) --video_uri $((5600+${N})) --mavlink_cam_udp_port $((14530+${N})) --output-file /tmp/${MODEL}_${N}.sdf

 	echo "Spawning ${MODEL}_${N} at ${X} ${Y}"

@@ -69,7 +69,7 @@ num_vehicles=${NUM_VEHICLES:=3}
 world=${WORLD:=empty}
 target=${TARGET:=px4_sitl_default}
 vehicle_model=${VEHICLE_MODEL:="iris"}
-export PX4_SIM_MODEL=gazebo-classic_${vehicle_model}
+export PX4_SIM_MODEL=${vehicle_model}

 echo ${SCRIPT}
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
@@ -84,7 +84,7 @@ pkill -x px4 || true

 sleep 1

-source ${src_path}/Tools/simulation/gazebo-classic/setup_gazebo.bash ${src_path} ${src_path}/build/${target}
+source ${src_path}/Tools/simulation/gazebo/setup_gazebo.bash ${src_path} ${src_path}/build/${target}

 # To use gazebo_ros ROS2 plugins
 if [[ -n "$ROS_VERSION" ]] && [ "$ROS_VERSION" == "2" ]; then
@@ -94,7 +94,7 @@ else
 fi

 echo "Starting gazebo"
-gzserver ${src_path}/Tools/simulation/gazebo-classic/sitl_gazebo-classic/worlds/${world}.world --verbose $ros_args &
+gzserver ${src_path}/Tools/simulation/gazebo/sitl_gazebo/worlds/${world}.world --verbose $ros_args &
 sleep 5

 n=0
@@ -126,7 +126,7 @@ else

 		m=0
 		while [ $m -lt ${target_number} ]; do
-			export PX4_SIM_MODEL=gazebo-classic_${target_vehicle}
+			export PX4_SIM_MODEL=${target_vehicle}
 			spawn_model ${target_vehicle}${LABEL} $n $target_x $target_y
 			m=$(($m + 1))
 			n=$(($n + 1))
--- a/Show More
+++ b/Show More