d3a1225c98
Tools: Ubuntu setup remove "set -e" to prevent grep early exit
...
- the gcc version grep was causing the script to exit early
2020-08-15 23:40:20 +02:00
fe06eaf8d9
Tools: Ubuntu setup update arm-none-eabi-gcc to 9-2020-q2-update
2020-08-15 23:40:20 +02:00
aad7e88af2
setup scripts: install dmidecode before using it
...
On normal desktop distributions dmidecode is preinstalled
and I was assuming it's part of the core tools. Thanks to a hint
https://github.com/PX4/Firmware/pull/15241#issuecomment-659395458
I found out it's not and am installing the package before using it.
2020-07-21 10:22:52 -04:00
9723b26d72
workflows: OSX.sh is now called macos.sh
2020-07-17 14:58:31 -04:00
7c49afa716
setup: only install homebrew if not already there
2020-07-17 14:58:31 -04:00
7667298c86
setup: move the OSX.sh script to macos.sh
...
It's called macOS for a while now, and no longer OSX.
2020-07-17 14:58:31 -04:00
6acf279085
setup: we no longer need Java 8
...
However, Java 11 or 14 depending on the Ubuntu version are just fine.
2020-07-17 14:58:31 -04:00
000c0c5905
setup: mark Ubuntu 16.04 as unsupported
...
Ubuntu was already unsupported, now that 20.04 is out, however, the
change was not reflected yet in this script.
2020-07-17 14:58:31 -04:00
cece343cf7
setup: Java 14 is fine now
2020-07-17 14:58:31 -04:00
aed114465e
setup: clean up macOS setup script
...
- Spaces -> tabs.
- Remove "brew install python" because it's already a dependency of the
px4-dev tap.
- Remove "brew install ccache" as we can also add it to the px4-dev tap.
- Don't try to update pip installation, it works fine as is.
- Install pip dependencies as user, no need for system-wide install.
2020-07-17 14:58:31 -04:00
547bd4c667
ubuntu.sh: add fix for gazebo's OpenGL problem in VMs
...
That makes gazebo crash in VMWare 3D graphics accelration.
2020-06-29 19:21:56 -04:00
9fed9f534e
ubuntu.sh: style, 20.04 comment and message wording
2020-06-29 19:21:56 -04:00
c9b82ad184
ubuntu.sh: source .profile before checking for ARM GCC
...
to avoid downloading and installing ARM GCC again if the script is
reran immediately after e.g. because it failed the first time.
2020-06-29 19:21:56 -04:00
c8d7027546
ubuntu.sh: don't upgrade pip outside of system package manager
...
This can lead to inconsistency with the installed package.
E.g. also if the package is remove the upgraded pip stays
but the symbolic links are gone.
2020-06-29 19:21:56 -04:00
47de2419a3
setup: don't require exact matplotlib version
...
Because this older version fails to install on Ubuntu 20.04
and makes the entire setup script fail.
2020-06-29 19:21:56 -04:00
e6f6d39198
Tools/setup: ubuntu updates to sync with px4io/px4-dev-base container
2020-06-23 12:53:34 -04:00
033c5d0110
Github Actions add MacOS build and fix Tools/setup/OSX.sh
...
- Tools/setup/OSX.sh wasn't installing px4-dev on fresh run
2020-06-22 15:23:29 -04:00
e6bec31890
add GNU screen to NUTTX dependencies in ubuntu setup
2020-06-15 10:16:08 +02:00
e409ec0038
install bc for all simulations
2020-05-20 09:04:41 +02:00
982d2a3180
ubuntu.sh: minor simplifications
2020-05-20 08:57:37 +02:00
d4de0e1219
Tools: fix ubuntu setup script
...
This fixes the error:
line 149: [: missing `]'
2020-05-18 11:53:26 +02:00
8804dae480
Ubuntu.sh - report Ubuntu 20.04 in setup
2020-05-12 13:13:36 +02:00
0a4e7142ee
ubuntu setup script: add gstreamer1.0-libav
...
This was needed in order to display video in QGC
2020-05-01 10:35:10 -04:00
95779ea670
ubuntu.sh: No automatic removal of modemmanager
2020-04-21 09:34:05 +02:00
0a7cde4819
arch.sh: use binary repository for gazebo
...
This makes installation a lot faster and less error prone.
2020-04-08 16:33:49 +02:00
e34b452bab
setup: only run usermod if $USER is available
...
This always triggered an error when using in docker as root.
2020-04-03 10:10:02 -04:00
975227c52a
Tools: setup: add 'packaging' to the requirements list
2020-03-24 13:31:41 +00:00
032b9909fa
Fix a typo in Ubuntu setup script
2020-03-08 11:56:33 +01:00
a8c3944485
setup: select Java 8 after installation
2020-01-30 22:45:29 -05:00
98f0ba33d2
setup: prevent prompt during install
...
This should prevent debconf from asking questions during install.
Presumably, the exported env variable DEBIAN_FRONTEND is not taken into
account in a sudo command, hence we need to add it every time.
2020-01-18 11:10:55 +01:00
09c3fc3e71
setup: add pyros-genmsg, sort list
2020-01-18 11:10:55 +01:00
ca7327056c
setup: prevent debconf asking about tzdata
2020-01-18 11:10:55 +01:00
83ccc4e61e
setup: fix script fail if check fails
2020-01-18 11:10:55 +01:00
7a0ba7f0ca
setup: remove duplicate
2020-01-18 11:10:55 +01:00
26d4169b7c
setup: remove unused dependencies
2020-01-18 11:10:55 +01:00
8353d609cb
setup: don't forget to install wheel
2020-01-18 11:10:55 +01:00
d764cfcb6d
setup: remove unusual Python dependencies
...
As far as I know these dependencies are only ever required when doing
analysis in ECL. At that point developers should be confident to add
what is required.
2020-01-18 11:10:55 +01:00
fcbf2e8f9e
setup: remove Python 2 requirements for Ubuntu
2020-01-18 11:10:55 +01:00
ac6d7e6730
setup: another try to install pip dependencies
2020-01-18 11:10:55 +01:00
8112a5c417
setup: fix call to pip/pip3
...
This should prevent the error:
Traceback (most recent call last):
File "/usr/bin/pip3", line 9, in <module>
from pip import main
ImportError: cannot import name 'main'
As described in:
https://github.com/pypa/pip/issues/5447#issuecomment-407693701
2020-01-18 11:10:55 +01:00
bac4854424
setup: stop on error
2020-01-18 11:10:55 +01:00
126b7a5642
setup: we need a newer pip
2020-01-18 11:10:55 +01:00
bf62b0f5e6
setup: use pip as user, don't forget python3-dev
...
In my opinion we should not mess with someones system Python
dependencies.
2020-01-18 11:10:55 +01:00
30a73416dc
mavsdk SITL testing code coverage and upload to codecov.io
2019-12-26 14:31:33 -05:00
6dc55f97d4
More fixes for Python 3 compatibility ( #13008 )
...
* More fixes for Python 3 compatibility
* Workaround if the six module is not pip installed
* Lose the semicolons
2019-12-19 02:05:55 -08:00
f317d227ef
arch.sh: get rid of ignition-cmake workaround
...
The AUR repository got fixed upstream after
I reported the issue. I tested on a fresh machine
so we can get rid of the workaround that was necessary. See
https://aur.archlinux.org/packages/ignition-cmake/#comment-712301
2019-10-24 08:50:18 +02:00
cefa7ec5dc
arch.sh: use nproc instead of grepping /proc/cpuinfo
2019-10-17 12:48:04 -04:00
7e2fb6b4da
arch.sh: switch permissions of pip install (again)
...
after testing the right solution on a fresh installation
2019-10-14 10:54:09 -04:00
c09ea2a9b0
arch.sh: don't execute pip as root
...
otherwise packages get installed in
/root/.local/lib/python3.7/site-packages
2019-10-12 08:38:39 +02:00
50c5150471
arch.sh: work around gazebo AUR build error and correct comments
2019-10-12 08:38:39 +02:00
Daniel Agar