* ekf2: allow manual position reset when horizontal aiding is active
This allows the pilot to override position esitmates manually
* mavlink sim: add support of failure gps struck
* mavlink sim: add GNSS failure "wrong" type
* ekf2-gnss: add reset mode
This allows the user to choose whether the position should immediately
be reset to GNSS on fusion timeout or if the EKF can continue with
velocity dead-reckoning.
* ekf2: fix unit test changes due to GNSS start logic
Especially because the EKF doesn't need to reset the states if the test
ratio is already passing
* rename mode enum
* reset to gps lat lon on init
* remove obsolete reset-condition (handled in #25223)
* WIP try to upgrade compiler externally
---------
Co-authored-by: bresch <brescianimathieu@gmail.com>
Co-authored-by: Niklas Hauser <niklas@auterion.com>
- replace hardcoded 1000 m/s velocity state constraint with new EKF2_VEL_LIM parameter (default 100 m/s)
- new velocity limit also used for GPS checks and external vision velocity
This is similar to fake pos but is only used when the ekf has an
external information telling it that the vehicle is not changing
position. This information can then be used to keep a valid local
position even when the vehicle isn't exactly at rest.
* added support for resetting wind states to external observation
Signed-off-by: RomanBapst <bapstroman@gmail.com>
* moved wind related functions into separate file
Signed-off-by: RomanBapst <bapstroman@gmail.com>
* added VEHICLE_CMD_EXTERNAL_WIND_ESTIMATE
Signed-off-by: RomanBapst <bapstroman@gmail.com>
* correctly compute variances
Signed-off-by: RomanBapst <bapstroman@gmail.com>
* ekf2: implement wind reset
Signed-off-by: RomanBapst <bapstroman@gmail.com>
* only allow VEHICLE_CMD_EXTERNAL_WIND_ESTIMATE during wind dead-reckoning
and increase horizontal velocity variance to allow velocity states to move
towards solution that is aligned with the newly set wind
Signed-off-by: RomanBapst <bapstroman@gmail.com>
* only reset wind on ground
* still use wind reset using airspeed when it wasn't initialized
* exclude func for rover, change reset interface
* handle wind reset in drag-fusion
* replace state reset with variance reset in sideslip/drag fusion
* remove resetWind function
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Co-authored-by: Marco Hauswirth <marco.hauswirth@auterion.com>
* estimator gps check fail flag for spoofing
* warn whenever spoofing state changes to true, use default hysteresis to completely stop fusion
* dont introduce more GPS namings, GNSS instead
* flash: exclude mantis for cuav_x7pro
In this mode, the mag is used to inilialize the heading.
During flight, the heading is predicted using gyros and corrected
by GNSS measurements if available.
Use flow rates instead of integrals in backend. This allows us to delay
the data to the mitpoint integration time and simplifies the code in
general.
Gyro compensation can still be done in EKF2 if needed, but the
flow module normally already appends the correct gyro data to the flow
message.
* ekf2_derivation: use single source of state definition
The state is defined as an ordered dictionary of group elements and
everything else is generated using that state definition
* ekf2: generated state sample add const reference getter
---------
Co-authored-by: bresch <[brescianimathieu@gmail.com](mailto:brescianimathieu@gmail.com)>
Co-authored-by: Daniel Agar <daniel@agar.ca>
- when GNSS is used require low mag heading innovations during
horizontal acceleration (yaw observable) to validate the mag
- only fuse mag heading just enough to constrain the yaw estimate
variance to a sane value. Leave enough uncertainty to allow for a
correction when the yaw is observable through GNSS fusion
- split mag_3d into new standalone mag fusion and mag fusion allowed to update all states (full mag_3d)
- new dedicated control logic for mag/mag_3d fusion and standalone mag heading fusion
- if WMM available use for mag_I and mag_B init
- mag states reset if external yaw reset (yaw estimator, GPS yaw, etc)
- mag reset if declination changed (eliminate _mag_yaw_reset_req)
- mag fusion (but not mag_hdg or mag_3d) can be active during gps_yaw or ev_yaw (if yaw aligned north)
Co-authored-by: bresch <brescianimathieu@gmail.com>
* ekf2-test: remove outdated codegen comparison
The definition of states changed so the comparison with the old
derivation cannot work anymore.
---------
Co-authored-by: bresch <brescianimathieu@gmail.com>
