Julian Oes
bf9167da50
ina238: actually run it
...
Without this the driver would not run when started from the
i2c_launcher.
2025-05-14 07:34:02 -07:00
Julian Oes
abf903a851
ina2xx: params require reboot
2025-05-14 07:34:02 -07:00
Julian Oes
117f198891
ina228/ina238: correctly set ADC range
...
It turns out that we set the ADC range incorrectly leading to the
measured current being capped at a certain level as the ADC on the
sensor saturates.
Instead, we need to set the range according to the formula given in the
interface datasheet.
2025-05-14 07:34:02 -07:00
Sebastian Domoszlai and Matthias Grob
b5f37c9fa6
Simplify Battery-related Enum Naming ( #24265 )
...
* Simplify battery-related enum naming
* Fix mistakenly removed string in enum names
* Fix missing renamings
* Update outdated file
* msg: Increase battery_status version since the enum naming was changed
* Revert message version increase
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com >
2025-02-28 11:42:40 -09:00
Alex Klimaj
07e7c64e60
drivers/power_monitor/ina238: retry if read fails
...
* ina238: retry if read fails
* ina238: increase retries and only publish not connected if register check fails
* ina238: use I2C resets
2025-01-22 15:32:26 -05:00
Alexander Lerach
3d36c8519d
drivers/power_monitor: Implement temperature sensor support for INA228 / INA238
2024-09-05 23:09:01 -04:00
Roman Bapst
380841563f
ina238: set shunt calibration to desired value if readback is incorrect ( #22237 )
...
* refactor driver to dynamically check registers and do reset if register does not match desired value
* have seen various times where shunt calibration was reset in air
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2024-01-30 11:28:05 -05:00
alexklimaj
5f8ecd6b40
driver: ina2** allow 3 indexes
2023-11-21 21:44:39 -05:00
murata
cc6c6c3b8c
power_monitor: Determine I2C communication errors
2022-02-20 16:05:44 -05:00
Matthias Grob
fdc40880d0
battery: separate out publishing from updating
...
to allow smart battery drivers to use the battery class and
filling in additional information in case it makes sense.
2021-12-07 21:06:51 +01:00
Matthias Grob
e70d70468a
battery: pass voltage and current by setter
2021-12-07 21:06:51 +01:00
Matthias Grob
39641494da
battery: pass connected flag in by setter
2021-12-07 21:06:51 +01:00
Matthias Grob
38d23f5345
battery: pass priority in by setter
2021-12-07 21:06:51 +01:00
Matthias Grob
f9fc9a9af6
battery: pass source in by constructor
2021-12-07 21:06:51 +01:00
Matthias Grob
b965923c08
battery: fetch throttle value inside of class
2021-12-07 21:06:51 +01:00
Peter van der Perk
5e98f38f78
Kconfig rebase backports 26-09-21
2021-10-07 10:09:01 -04:00
Thomas Debrunner
43ece74fa0
ina238: Do not expose raw adc config to user, make specific to ina238
2021-09-22 10:02:17 +02:00
Julian Oes