David Sidrane
347ab5daaa
px4_fmu-v3: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
0da14887d0
px4_fmu-v3 Updates for NuttX 9.1.0-
...
px4_fmu-v3: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
Daniel Agar
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar
e3d31a881e
boards: NuttX disable posix message queues
2020-07-17 17:00:21 -04:00
Daniel Agar
28d2aca699
boards: include all procfs entries on boards that aren't flash constrained
2020-05-01 20:59:57 -04:00
Daniel Agar
8d0c92003a
boards: remove all CONFIG_NXFONTS_DISABLE*
2020-05-01 20:59:57 -04:00
Beat Küng
34c75f2d36
boards: temporarily disable UART TX DMA
...
work-around for https://github.com/PX4/Firmware/issues/14659 .
This can be reverted when fixed properly.
2020-04-27 08:47:46 -04:00
Daniel Agar
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
...
- increase stack sizes to run cleanly under stackcheck
- this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
- remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
Beat Küng
cbed023334
px4/v{2,3}: enable tx dma on telem2
2020-04-09 14:59:28 +02:00
Daniel Agar
40b1043e12
NuttX boards minor lpwork and init stack increases
2020-04-02 23:39:17 -04:00
Daniel Agar
15332a7e56
boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15
2020-04-01 16:17:14 -04:00
Daniel Agar
44bec269b0
boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15
2020-03-25 17:59:22 -04:00
Daniel Agar
8738c26426
boards: enable NuttX SPI DMA buffers
...
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
- remove explicit DMA buffer allocations from new IMU drivers
- restore original BOARD_DMA_ALLOC_POOL_SIZE
- decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
2020-03-22 19:24:26 -04:00
Daniel Agar
505afc6063
boards: increase LPWORKSTACKSIZE 1536 -> 1600
2020-03-10 12:53:01 -04:00
Beat Küng
d74d094940
nuttx configs: disable nuttx timers which are used for PWM output
...
These are not required, and to be consistent we enforce disabling them now.
2020-02-13 03:49:16 -08:00
Daniel Agar
99aae8b891
NuttX use toolchain math.h and avoid empty drivers/Kconfig
2019-11-16 11:43:42 +01:00
David Sidrane
2c13883e56
px4:fmu-v3 BSP Updated to NuttX 8.1+
2019-11-16 11:43:42 +01:00
Beat Küng
803a71928f
fmu-v3: enable DShot
...
Disables RX DMA on TEL4 and IO debug serial port
2019-10-11 08:14:17 +02:00
Daniel Agar
0955fd2d58
NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20
2019-08-07 21:23:27 -04:00
Daniel Agar
5421ef5535
NuttX increase HPWORK and LPWORK stack by 256 bytes
2019-08-06 23:15:07 -04:00
Daniel Agar
9d701a077d
NuttX reduce stack for interrupts, HPWORK, LPWORK
2019-08-06 11:00:55 -04:00
Daniel Agar
f1f84e52c7
px4_fmu-v3 stackcheck compress defconfig
2019-03-21 08:41:01 -04:00
David Sidrane
edd9f91a19
board:Set larger stack margin
2019-03-01 23:45:48 -05:00
David Sidrane
9430854404
px4_fmu-v3: Inital commit NuttX 7.27+
2019-01-25 06:32:37 -08:00
Daniel Agar
abb3817d31
boards new split VENDOR_MODEL naming convention
2018-11-26 14:40:14 -08:00
Daniel Agar
f692ad04d0
boards organization
2018-11-26 14:40:14 -08:00
David Sidrane