fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
29,281 Commits 852 Branches 161 Tags
Commit Graph

1877 Commits

Author SHA1 Message Date
Timothy Scott
d78a842ca8 Rover: add airframe configuration for Aion R1 Rover (#12026) 
* Added Aion R1 airframe
* Tuned PID values for Aion R1
* Changed to generic mixer and cleaned up configuration
 2019-05-17 08:51:16 -04:00
Julian Oes
01fdd00c41 init.d-posix: $ is apparently not needed here 2019-05-14 11:04:04 +02:00
Julian Oes
ffeeedc310 init.d-posix: raise timeouts for fast SITL 
When simulating with lockstep we can raise the speed by setting the env
variable `PX4_SIM_SPEED_FACTOR`. Some inputs like RC, MAVLink heartbeats
from a ground station, or offboard controls via MAVLink are still at the
normal speed which leads to timeouts getting detected in PX4.

To work around this issue we can automatically multiply the timeout
parameters by the speed factor.
 2019-05-14 11:04:04 +02:00
Beat Küng
2448a84c36 SITL: add if750a model 2019-05-03 13:32:48 +02:00
Claudio Micheli
e7075a6660 rcS: Fix multiple set IO_PRESENT. 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2019-05-03 12:20:49 +02:00
Julian Oes
611417acd2 ROMFS: use auto-disarm in HITL Gazebo with Iris 
It is expected that Iris auto-disarms the same as in SITL.
 2019-04-30 06:39:35 -05:00
Daniel Agar
f032d0d9fc
SYS_MC_EST_GROUP mark LPE unsupported and update airframes (#11925) 2019-04-29 11:50:36 -04:00
Julian Oes
4ef59e0a59 standard_vtol: transition at airspeed of 16 m/s 
This way we prevent a big dip due to TECS in altitude when the
transition happens at 10 m/s already. Apparently the rule of thumb
is to set this transition speed at the same as airspeed cruise speed.
 2019-04-28 18:22:21 -04:00
bresch
89bc68e12b Auto - Rename MC_YAWRAUTO_MAX -> MPC_YAWRAUTO_MAX 2019-04-26 12:43:26 +02:00
sfuhrer
3d36dbfba3 added babyshark VTOL config file and mixer 2019-04-16 11:05:35 -04:00
Beat Küng
744b50b478 send MAVLink GROUND_TRUTH at 25 Hz, only in SIH mode. And minor cleanup 2019-04-12 09:25:07 +02:00
romain
e1d9438f79 sih: remove SYS_SIH parameter and extend SYS_HITL 2019-04-12 09:25:07 +02:00
romain
6ff228c2ff sih module implemented with hrt_call_every and semaphore_wait 2019-04-12 09:25:07 +02:00
Beat Küng
914a9b78b6 new airframe for sih, HIL_STATE_QUATERION sent through MAVLink 2019-04-12 09:25:07 +02:00
Daniel Agar
5a50f96bcf
move icm20948 (Here GPS compass) to Cube sensors start (#11838) 2019-04-11 11:15:53 -04:00
Julian Oes
98857b4b94 ROMFS: don't check for UAVCAN_ENABLE param in SITL 
This prevents a warning message being printed to SITL users because the
UAVCAN_ENABLE param does not exist.
 2019-04-05 08:18:17 +02:00
Julian Oes
82682ac716 init.d-posix: re-use rc.logging 
With this change the param SDLOG_MODE can be used for SITL as well.
 2019-04-05 08:18:17 +02:00
Beat Küng
0bb5225370 rcS: add airframe parameter versioning and extend SYS_AUTOCONFIG 2019-04-05 08:08:47 +02:00
Daniel Agar
0c226e9b64 cmake fix ROMFS build dependencies 2019-04-03 12:33:12 -04:00
mcsauder
e6f1a2db12 Delete trailing whitespace, extra newlines, to quiet git hooks and add an extra = so that it does not appear to git as a merge conflict marker. 2019-04-02 15:31:37 -04:00
David Sidrane
eb58dae51b lights:Remove conditional rgb led starting (do all of them) 
There is no need to not to start a pwm based led or a
   rgbled_ncp5623c if the old TCA62724FMG is started. They
   will all work in parallel.
 2019-04-02 13:40:17 -04:00
Nico van Duijn
b7784a1439 Add MAVLink stream and cmake sitl target 2019-04-02 08:17:13 +02:00
DanielePettenuzzo
75f1ad36d1 start px4flow after all rangefinders (including the ones going through rc.serial) 2019-03-28 06:04:10 -04:00
Beat Küng
14ef009aab logging: add SDLOG_MODE = -1 to disable logging completely 2019-03-21 08:15:48 +01:00
Julien Lecoeur
5f06c6a1aa VTOL: add parameter to prevent flight if roll direction was not checked 
Mark V19_VT_ROLLDIR @category system

Throttle down mavlink critical msg

Send 0 actuator_output for safety

VTOL: unset v1.9 roll direction safety check param for builtin airframes
 2019-03-15 00:48:23 -04:00
Julien Lecoeur
e28f8a7f2e VTOL mixers: invert FW roll sign in builtin mixers 
This inversion matches the fixed sign in the commands generated
by the VTOL attitude controller.
This commit, combined with the previous commit, should have no effect.
For safety, it is recommended to check the direction of roll control
surfaces before flight.
 2019-03-15 00:48:23 -04:00
Martina Rivizzigno
09b795161e Obstacle Avoidance testing in CI (#10780) 2019-03-15 00:37:23 -04:00
Beat Küng
6c3e79f361 mc airframes: reduce I gains a bit 
A side-effect of the previous commit is that the integral is loaded up
during a flip, which leads to visible bounce-backs after a flip.
Reducing the I helps, but there's a trade-off and we'll need a better
solution.
 2019-03-01 07:42:18 +01:00
Hamish Willee
5132368378 Flying Wing init files: Fix up main output docs 2019-02-25 12:01:27 +01:00
Hamish Willee
e5dbd39ca6 Fx79 Frame: Reverse aileron outputs 2019-02-25 12:01:27 +01:00
DanielePettenuzzo
24f77ec5a4 rcS: start camera_capture later in script 2019-02-10 18:07:44 -05:00
DanielePettenuzzo
6b65eb2225 camera feedback: remove CAM_FBACK_MODE param. CAM_CAP_FBACK from camera capture driver will be used instead. 2019-02-10 18:07:44 -05:00
DanielePettenuzzo
d49752141d rename camera capture feedback param and move it from camera_feedback module to camera capture driver 2019-02-10 18:07:44 -05:00
DanielePettenuzzo
42afc88285 add camera trigger feedback (input capture when camera actually takes the photo) 2019-02-10 18:07:44 -05:00
bresch
faa8b6fe6d Camera Capture - enable capture at startup 2019-02-10 18:07:44 -05:00
Mohammed Kabir
94bb02a9c7 Add camera_capture driver 2019-02-10 18:07:44 -05:00
Daniel Agar
2d922b5cb4
FW airframe defaults relax EKF2 GPS checks 2019-02-04 11:02:38 -05:00
Beat Küng
aa020eb28e airframes: add Holybro QAV250 2019-02-04 09:31:02 -05:00
Julien Lecoeur
fe83378db4 Tiltrotor: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Julien Lecoeur
6c1d85716c Convergence: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Julien Lecoeur
15f9b70431 Claire: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Julien Lecoeur
9b5dd1596f FireFly6: Do not lock elevons in multirotor mode 
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
 2019-02-03 22:33:42 -05:00
Anthony Lamping
77ea5249a1 startup: add plane_cam 2019-02-03 22:32:24 -05:00
Daniel Agar
115c31451c SITL use EKF2_MAG_TYPE default value 2019-01-31 09:23:12 -05:00
Daniel Agar
8dc0509989 mpu9250: split icm20948 support out into new separate driver 2019-01-30 09:29:08 +01:00
Daniel Agar
489ea68b8d ROMFS fix pruned dependency and cleanup 2019-01-29 15:34:36 -05:00
David Sidrane
78619514b7 ROMFS/CMakeLists build gencromfs 2019-01-25 06:32:37 -08:00
David Sidrane
5036a09e22 Add support from cromfs generation 2019-01-25 06:32:37 -08:00
Daniel Agar
1ded189f58 ROMFS rcS execute (optional) rc.board_defaults after AUTOCNF set 2019-01-18 11:23:01 -05:00
Daniel Agar
fef65bf5c8 ROMFS split rc.board into defaults, sensors, and extras 2019-01-15 23:52:46 -08:00