Lorenz Meier
129aa35fcd
FMU driver: Load channel reverse mask from parameters
2015-05-25 16:42:47 +02:00
Lorenz Meier
3b3e98ed19
Rename FMU params
2015-05-25 16:42:46 +02:00
Lorenz Meier
e4a5ceb429
FMU driver: Support pwm reversal, prepare config parameters
2015-05-25 16:42:46 +02:00
Roman Bapst
555e96a37a
fixed publication of mixer limit flags
2015-04-10 20:26:38 +02:00
Lorenz Meier
4e1905c1d8
FMU: Fix peripheral reset
2015-02-28 14:32:11 +01:00
Lorenz Meier
dfdf741b13
FMU: Make peripheral rail power controllable
2015-02-28 11:22:19 +01:00
Andrew Tridgell
9a875c53af
px4fmu: added "mode_pwm4" startup mode
...
this is the default mode ArduPilot uses, and by setting it in the init
script we avoid any pin activity on the two GPIO pins during boot
2015-02-23 19:52:57 +01:00
Lorenz Meier
3ff49778a8
FMU driver: Report class instance registration fail
2015-02-15 21:40:08 +01:00
Ban Siesta
1d19166d18
fmu: some arguments were missing in the usage/help
2015-02-15 16:27:57 +01:00
Lorenz Meier
c0d246e8e4
CDEV::I2C: Enforce one speed per bus
2015-02-13 09:12:38 +01:00
Lorenz Meier
fac158f7e5
Board drivers: Move to 0-based index
2015-02-09 22:56:22 +01:00
Thomas Gubler
84ff3c671d
Merge remote-tracking branch 'upstream/master' into ros_messagelayer_merge2_attctrl_posctrl
...
Conflicts:
src/drivers/px4fmu/fmu.cpp
2015-02-01 11:06:47 +01:00
Lorenz Meier
678d5c24fb
FMU driver: Move to topic groups
2015-01-29 16:33:54 +01:00
Thomas Gubler
2d124852c1
propagate uorb contants change through all modules/drivers
2015-01-28 16:31:41 +01:00
Thomas Gubler
14aa5f9441
add topic header includes
2015-01-25 15:00:35 +01:00
Lorenz Meier
6300338d2a
FMU driver: Fix resource leak for test routine.
2015-01-21 08:58:47 +01:00
Lorenz Meier
5aa75c8f00
Fixed coverity CID #12543
2015-01-19 13:52:39 +01:00
Lorenz Meier
648cb78268
FMU driver: Show up as secondary interface to allow mixer loads.
2015-01-06 19:51:04 +01:00
Lorenz Meier
f7f5406243
FMU driver: optimize for size
2014-11-15 13:51:49 +01:00
Andrew Tridgell
dd23d0acbc
drivers: allow forcing the safety switch on
...
This allows forcing the safety switch to the on position from software
which stops the pwm outputs
2014-10-30 08:44:00 +11:00
Holger Steinhaus
87b2375be4
Ignore single channels during PWM output
2014-08-26 14:38:32 +02:00
Lorenz Meier
85ccecea9c
FMU driver: stricter init
2014-07-16 09:05:15 +02:00
Lorenz Meier
a2f528c5ba
Merged master
2014-07-12 16:11:43 +02:00
Andrew Tridgell
37b4cdfce2
board_serial: use a uint8_t buffer
...
we should not be using 'char' for binary APIs, as the C standard does
not specify if it is signed or unsigned, so results may not be
consistent
2014-07-08 11:39:40 +02:00
Lorenz Meier
3b44807887
Reduce excessive FMU stack usage
2014-07-08 09:15:47 +02:00
Don Gagne
92adbe9216
Fix compiler warnings
2014-06-29 17:47:24 -07:00
Don Gagne
d5b5dcef24
Fix bugs found through compiler warnings
2014-06-29 12:01:43 -07:00
Lorenz Meier
542cc7d7fb
fmu: Rely on pwm_limit() call for band limits, do constrain instead of altering the direction / value
2014-05-23 20:23:05 +02:00
Lorenz Meier
97e6090700
Merge pull request #937 from gumstix/aerocore
...
Aerocore
2014-05-15 01:31:24 -07:00
Lorenz Meier
b216cc3cac
px4fmu: Give the FMU driver only the stack for init it needs
2014-05-14 21:31:29 +02:00
Ash Charles
2d29c5bd72
[aerocore] Remove commented code for GPIO2
...
GPIO2 is currently used for the tone alarm, not an arbitrary GPIO.
Signed-off-by: Ash Charles <ashcharles@gmail.com >
2014-05-13 14:06:59 -07:00
Ash Charles
e5508a1aa0
Add Gumstix AeroCore device
...
Based on the work of Andrew Smith [1], add board configuration and device
drivers to support the Gumstix AeroCore (previously Aerodroid) board [2]. The
AeroCore is an autopilot board based on a STM32F427 similar to the FMUv2.
[1] https://github.com/smithandrewc/Firmware
[2] https://store.gumstix.com/index.php/products/585/
Signed-off-by: Ash Charles <ashcharles@gmail.com >
2014-05-13 09:41:41 -07:00
Lorenz Meier
df7d595999
Remove noreturn attribute from all drivers that actually can return
2014-05-09 09:19:44 +02:00
Lorenz Meier
45be38c333
Removing an unwanted usleep on poll errors
2014-05-08 14:24:10 +02:00
Lorenz Meier
ab2a85a153
Merge pull request #782 from PX4/fmu_mixer
...
px4fmu: support all actuator control groups
2014-05-07 04:17:27 -07:00
Andrew Tridgell
ab1939c6a3
pwm: added PWM_SERVO_SET_FORCE_SAFETY_OFF ioctl
...
this allows the safety switch on px4io to be forced off
2014-04-28 11:45:45 +02:00
Anton Babushkin
db37d3a495
fmu driver: bugs fixed
2014-04-07 13:36:55 +04:00
Anton Babushkin
1362d5f195
px4fmu: support all actuator control groups, dynamically subscribe to required topics
2014-03-30 20:38:24 +04:00
Helen Oleynikova
1d9d24f605
Added flag for ARDrone interface.
2014-03-05 10:50:16 +01:00
Lorenz Meier
9cdbbab855
Differentiate between publication and signal receive timestamp, correctly set the rc_lost flag in the frame. Ready for prime-time testing.
2014-01-26 14:52:46 +01:00
Andrew Tridgell
4524fe3e48
px4fmu: added PWM_SERVO_SET_COUNT API
...
this allows the balance between PWM channels and GPIOs to be changed
after the main flight code has started, which makes it possible to
change the balance with a parameter in APM
2014-01-23 21:41:07 +01:00
Lorenz Meier
352dea6754
Remove outdated configs, clean up pwm limit compilation
2014-01-15 20:04:11 +01:00
Lorenz Meier
33b84186e3
Patching up MPU6K pin disable defines
2014-01-14 08:58:30 +01:00
Lorenz Meier
1834a884b2
Added FMU command to read serial
2014-01-07 21:42:39 +01:00
Lorenz Meier
c311462f3c
Added actuator control removal
2013-12-13 16:52:35 +01:00
Lorenz Meier
012adc9e33
Minor fixes to bus reset
2013-12-04 09:25:07 +01:00
Lorenz Meier
acc3cc087f
Added sensor rail reset IOCTL and command (fmu sensor_reset 10 resets for 10 ms)
2013-12-04 08:17:35 +01:00
Lorenz Meier
881cf61553
Added IOCTL and command for sensor rail reset (does not yet re-initialize sensor drivers)
2013-12-04 07:57:23 +01:00
Anton Babushkin
63d81ba415
actuator_controls_effective topic removed
2013-11-16 23:16:09 +04:00
Anton Babushkin
45e158b88c
Fixed actuator_controls_effective on FMU
2013-11-16 16:06:23 +04:00
Lorenz Meier