Add ARK_FMU_V6X to RCS netman
Remove arkv6x rc single wire
Fix arkv6x mtd
arkv6x bootloader init all pins to prevent power cycling peripherals on boot
arkv6x don't power cycle sd card on boot
arkv6x add UART4 Telem 4
- rcS parameter backup try to directly restore param (FRAM) from backup (in case SD card is removed before successful export)
- rcS parameter backup logging rearrange to capture more logging output (param_import_fail.txt)
- posix rcS try to keep param backup and restore roughly in sync with NuttX rcS
- tinybson fix debug printf format
- param_export_internal ensure file descriptor positioned at 0 (precaution)
This feature allows user to use a Gripper type pacakge delivery
mechanism on a drone to trigger the delivery during a mission via the
mission item `DO_GRIPPER`.
This is a minimal change that is intended to have simplest pacakge
delivery feature on PX4, however the future scope would extend this
feature out of Navigator, and rather move towards a federated PX4
(flight-mode flexibility) architecture. But until then, this will serve
the purpose.
Update Tools/sitl_gazebo submodule to remove sdf file overwrite error
- There was an error happening due to .sdf file being overwritten, it
was caused by a wrongfully added. sdf file.
- This update pulls in the PR commit: https://github.com/Auterion/sitl_gazebo/pull/147
Initial cut on supporing PAYLOAD_PLACE mission item
Tidy and comment on navigation.h to clarify mission item definition
- Convert vehicle command ack subscription data type to
SubscriptionData, to not care about having a dedicated struct for
copying the latest data
- Tidy and comment on navigation.h to clarify the definition of
mission_item_s, which is confusing as it is an intergration of MAVLink
Standard into PX4's internal Mission Item structure
Rename mission_block's mission item reached function & cleanup navigator
- Isolated Handle Vehicle Commands function inside the Navigator
- Rename mission_block's mission item reached function to 'reached or
completed', as the navigation command can also be an action (e.g.
DO_SET_SERVO, which doesn't make sense to refer to as 'reached' when we
have successfully done executed the command)
Include MAVLink PR commit to include payload_drop message
More changes to add payload_drop MAVLink message support
- Comitting for testing purposes
Add mission item payload_drop to vehicle command payload drop link
- Now with a mission item with the nav_cmd set to 'payload drop', the
appropriate 'payload drop' vehicle command will be issued
Make Payload drop executable via Mission Plan
Implement payload_drop module to simulate payload delivery
- Simple module that acknowledges the payload drop vehicle command after
certain time, to simulate a successful delivery
Additional changes - payload drop module not working yet
- Need to do more thread stuff to make it work :(
Fix Payload Drop enum mismatch in vehicle_command enums
- First functional Payload Drop Implementation MVP
- Simple Ack & resuming mission from Navigator tested successfully
Hold the position while executing payload drop mission item
- Still the position hold is not solid, maybe I am missing something in
the position setpoint part and all the internal implications of
Navigator :(
Add DO_WINCH command support
Some fixes after rebase on develop branch
- Some missed brackets
- Some comment edits, etc
Add DO_WINCH command support
- Still has a problem of flying away from the waypoint while the
DO_WINCH is being executed, probably position setpoint related stuff :(
Apply braking of the vehicle for DO_WINCH command
- Copies the behavior of NAV_CMD_DELAY, which executes a smooth, braking
behavior when executing the delay because of the braking condition in
`set_mission_items` function
- This will not apply to Fixed wings
- The payload deploy getting triggered may be too early, as right now as
soon as the vehicle approaches the waypoint within the acceptance
threshold, the payload gets deployed
Add DO_GRIPPER support
Implement Gripper actual Hardware triggering support
- Currently not working, possibly in the mixer there's a bug
- Implemented the publishing of actuator_controls_1 uORB topic
- Implemented the test command for the payload_drop module, to test the
grpiper functionality
- Edited px4board file to include the payload_drop module
- Added Holybro X500 V2 airframe file, to enable testing on X500 V2
- Created new Quad X Payload Delivery mixer, which maps the actuator
controls 1 topic's data into the MAIN pin 5 output
Make Payload Drop Gripper Work
- Initialization of the Gripper position to CLOSED on Constructor of the
payload_drop module
- Setting the OPEN and CLOSED value to the appropriate actuator controls
input
Set vehicle_command_ack message's timestamp correctly
- By not setting the timestamp, the ack commands were not correctly
graphed in PlotJuggler!
Rename payload drop module to payload deliverer
- I think it's a more complex name (harder to type), but more generic
Add Gripper class (WIP)
Add Gripper class functionalities
- Add gripper uORB message
- Add gripper state machine
Use Gripper class as main interface in payload_deliverer
- Utilizes Gripper class functions for doing Gripper functionality
Remove mixer based package delivery trigger logic
- Remove custom mixer files that mapped actuator controls to outputs
statically
Additional improvements of the payload_deliverer
Fix payload_deliverer module not starting
- _task_id wasn't geting set appropriately in task_spawn function, which
led to runtime failure
Add Gripper Function to mixer_module
- Still not showing up as function mapping in QGC, needs fix
Add parameters to control gripper behavior
- Now user can enable / disable gripper
- Also select which type of gripper to use
Applying review from nuno
Remove timeout fetching from mission item and use gripper's timeout
- Previously, it was planned to use a custom DO_GRIPPER and DO_WINCH
MAVLink message definitions with information on timeout, but since now
we are using original message definition, only relevant timeout
information is defined in the payload_deliverer class
- This change brings in the timeout parameter to the Navigator, which
then sets the timeout in the mission_block class level, which then
processes the timeout logic
Make payload deployment work for Allmend test :P
Support gripper open/close test commands in payload_deliverer
Move enum definition for GRIPPER_ACTION to vehicle_command.msg
Remove double call for ` ${R}etc/init.d/rc.vehicle_setup`
- Was introduced during the rebase
- Was causing module already running & uORB topic can't be advertised
errors
Fix format via `make format` command
Modify S500 airframe file to use for control allocation usage
- Added Control allocation related parameters as default to not have it
reset every time the airframe is selected
Implement mission specific payload deploy timeout and more changes
Switch payload_deliverer to run on work queue
Remove unnecessary files
- Airframe changes from enabling control allocation are removed
Address review comments
- Remove debug messages
- Remove unnecessary or verbose comments & code
- Properly call parameter_update() function
Switch payload_deliverer to scheduled interval work item & refactor
- Switch to Schedeuled on Interval Work Item, as previous vehicle
command subscription callback based behavior led to vehicle comamnd ack
not being sent accordingly (since the Run() wouldn't be called unless
there's a new vehicle command), leading to ack command not being sent
out
- Also, old vehicle commands were getting fetched due to the
subscription callback as well, which was removed with this patch
- Fix the wrong population of floating point param2 field of vehicle
command by int8_t type gripper action by creating dedicated function
- Refactor and add comments to increase readability
Add gripper::grabbing() method and handle this in parameter update
- Previously, the intermediate state 'grabbing' was not considered, and
when the parameter update was called after the first initialization of
the gripper, the grab() function was being called again, which would
produce unnecessary duplicate vehicle command.
- Also replaced direct .grab() access to sending vehicle comamnd, which
unifies the gripper actuation mechanism through vehicle commands.
Navigator: Change SubscriptionData to Subscription to reduce memory usage
- Also removed unused vehicle command ack sub
PayloadDeliverer: Remove unnecessary changes & Bring back vehicle_command sub cb
- new modules/simulation directory to collect all simulators and related modules
- new Tools/simulation directory to collect and organize scattered simulation submodules, scripts, etc
- simulation module renamed to simulator_mavlink
- sih renamed to simulator_sih (not a great name, but I wanted to be clear it was a simulator)
- ignition_simulator renamed to simulator_ignition_bridge
- large sitl_target.cmake split by simulation option and in some cases pushed to appropriate modules
- sitl targets broken down to what's actually available (eg jmavsim only has 1 model and 1 world)
- new Gazebo consistently referred to as Ignition for now (probably the least confusing thing until we fully drop Gazebo classic support someday)
- 4096 of 3 hex digits each for rev and ver is enough.
#defines used in SPI versions do not be long format, use use the macro
- Board provides a prefix and the formatting is sized and built in
- No need for funky board_get_base_eeprom_mtd_manifest interface
Original mft is used where the abstraction is done with the MFT interface
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
- set MAV_TYPE as a parameter default per vehicle type, or airframe if necessary
- cleanup MAV_TYPE param metadata and commander helper to only include
what's currently used in PX4
- uavcan firmware server no longer shuts down when arming (nodes might restart in flight)
- always handle UAVCAN parameters with or without the FW server active
- remove legacy ESC enumeration in FW server
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
