6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
00b4807443
mro_x21: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
aa1cb370e4
mro_x21 Updates for NuttX 9.1.0-
...
mro_x21: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
e3d31a881e
boards: NuttX disable posix message queues
2020-07-17 17:00:21 -04:00
5e7d2e830d
boards: delete old board.h boilerplate
2020-06-08 19:10:33 -04:00
28d2aca699
boards: include all procfs entries on boards that aren't flash constrained
2020-05-01 20:59:57 -04:00
8d0c92003a
boards: remove all CONFIG_NXFONTS_DISABLE*
2020-05-01 20:59:57 -04:00
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
...
- increase stack sizes to run cleanly under stackcheck
- this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
- remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
40b1043e12
NuttX boards minor lpwork and init stack increases
2020-04-02 23:39:17 -04:00
15332a7e56
boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15
2020-04-01 16:17:14 -04:00
44bec269b0
boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15
2020-03-25 17:59:22 -04:00
8738c26426
boards: enable NuttX SPI DMA buffers
...
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
- remove explicit DMA buffer allocations from new IMU drivers
- restore original BOARD_DMA_ALLOC_POOL_SIZE
- decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
2020-03-22 19:24:26 -04:00
0ce9e113ff
boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32
2020-03-11 22:08:37 -04:00
179c89b6bd
board configs: extend board_dma_map.h with a table
2020-03-11 22:08:37 -04:00
38a10fc7fc
mro_x21: add board_dma_map.h and enable SPI1 DMA
2020-03-11 22:08:37 -04:00
505afc6063
boards: increase LPWORKSTACKSIZE 1536 -> 1600
2020-03-10 12:53:01 -04:00
d74d094940
nuttx configs: disable nuttx timers which are used for PWM output
...
These are not required, and to be consistent we enforce disabling them now.
2020-02-13 03:49:16 -08:00
036a45377d
boards rename auav_x21 -> mro_x21
2020-01-22 15:33:02 -05:00
Daniel Agar