Daniel Agar
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
Daniel Agar
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
Daniel Agar
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
Daniel Agar
2728af4264
boards: cubeorange and cubeyellow disable serial console (used for ADSB on new carrier boards)
...
- add console builds (cubepilot_cubeorange_console) for hardware test rack and developers
2020-09-21 11:53:49 -04:00
David Sidrane
fc5caf382c
cubepilot_cubeyellow: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
f9adf861dc
spracing_h7extreme Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
David Sidrane
e8e463b875
cubepilot_cubeyellow Updates for NuttX 9.1.0-
...
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
Daniel Agar
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar
65ab7cef2e
boards: cubepilot/cubeyellow small fixes and improvements
...
- fix UART config (GPS1, etc)
- TELEM2 enable TX DMA
- init simplify (sync with CubeOrange)
- amber LED use for armed state
- manually start ak09916 (Here2) on I2C2 with proper rotation
2020-08-16 17:45:47 -04:00
Daniel Agar
cfbf69f2a7
boards: rename Hex -> CubePilot
...
- hex_cube-orange_default -> cubepilot_cubeorange_default
- hex_cube-yellow_default -> cubepilot_cubeyellow_default
2020-07-26 13:55:41 -04:00
Daniel Agar