563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2023-10-02 09:37:06 +02:00
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com >
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com >
Co-authored-by: alexklimaj <alex@arkelectron.com >
2022-11-20 20:28:07 -05:00
5b6e5a0968
boards: NuttX update all boards to preallocated sem holder list
...
- CONFIG_SEM_PREALLOCHOLDERS=32
- CONFIG_SEM_NNESTPRIO=16 (default)
2022-05-31 01:41:07 -07:00
3b6a5dbac3
nxp_fmuk66-e socketcan:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
71d5de5715
nxp_fmuk66-e: Update socketcan defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
d6ee418cdf
nxp_fmuk66:Add Serial RX DMA on Console
2021-07-20 18:22:35 -04:00
cd8182ba3c
nxp_fmuk66-e:Use SPI DMA
2021-07-02 09:08:10 -07:00
ed0b5a7c1a
FMUK66 update socketcan configs
2021-05-28 08:03:58 -07:00
9a085126fd
FMUK66 free up some RAM
2021-05-05 18:52:56 +02:00
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
3570e1b4da
nxp_fmuk66-e: Sync defconfig with latest V3 changes
2021-02-09 23:53:38 -05:00
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
3f82b19fc7
nxp_fmuk66-e: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
f9adf861dc
spracing_h7extreme Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
aa67fbdbcb
nxp_fmuk66-e: Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
5d5a767143
npx_fmuk66:CONFIG_BOARD_CRASHDUMP is not supported
2020-09-03 14:55:09 +02:00
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
e67486d603
nxp:Add support for rev E HW nxp_fmuk66-e
2020-07-31 09:46:27 -04:00
Silvan Fuhrer