- configure a backup schedule when using motion interrupt otherwise the
sensor will stop publishing entirely in the dark
- as a precaution issue full reset if sensor is stuck in a bad state
(no vaid data for an extended period)
- update light mode change criteria to match datasheet exactly
- fully respect datasheet quality and shutter metrics for mode changes
- use MOTION pin for scheduling if available
- log light mode
- refactor common enable LED code
- respect read and write time delays
Add new DeviceBusType_SERIAL to Device::DeviceId union
Add DRV_DIST_DEVTYPE's for all distance sensors
Change distance_sensor_s.id to distance_sensor_s.device_id
Modify all distance_sensor drivers to apply 'proper' device_id
- verify register writes
- cleanly reset on lighting mode changes as per the datasheet
- perf counters for mode switches and other errors
- cleanly reset on false motion detection
- minimize sleep on reset
- allowing setting custom rotation yaw angle directly on command line with -Y (ignoring SENS_FLOW_ROT)
- enable LED output
1. The spec specifies that the mode change condition should be met for 10
consecutive frames before changing to the next mode.
2. The spec (and comment) says that "PAW3902JF should not operate with Shutter < 0x01F4 in Mode 2" -
however the if condition checked the reverse condition
Signed-off-by: Koby Aizer <koby.aizer@tg-17.com>
- deprecate DriverFramework bmp280 driver (df_bmp280_wrapper)
- update beaglebone blue and snapdragon flight eagle boards to use in tree bmp280
- update posix (really just linux) and qurt I2C wrappers
- tested on beaglebone blue
and remove the px4_ prefix, except for px4_config.h.
command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done
Transitional headers for submodules are added (px4_{defines,log,time}.h)
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
* WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
* PMW3901: use frame count and quality metric
* PMW3901: set qual to 0 for unsuccessful SPI reads
* PMW3901: improve comment for collect_time
* PMW3901: set qual to zero for huge flow values
Script to update include paths:
for i in $(grep -rl 'include <px4_work_queue' src platforms); do sed -i 's/#include <px4_work_queue/#include <px4_platform_common\/px4_work_queue/' $i; done
Daniel Agar