fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-02 05:04:08 +08:00
Code Issues Packages Projects Releases Wiki Activity
40,104 Commits 852 Branches 161 Tags
Commit Graph

359 Commits

Author SHA1 Message Date
David Sidrane
c0facec889 cdc_acm_check:Prevent USB disconect on param save 
If the hardware support RESET lockout that has nArmed ANDed with VBUS
   vbus_sense may drop during a param save which uses
   BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE to prevent external resets
   while writing the params.  If we are not armed and nARMRED is low
   we are in such a lock out so ignore changes on VBUS_SENSE during this
   time.
 2022-02-21 10:56:41 +01:00
Julian Oes
490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
Jukka Laitinen
03c0a2d56c Fix some cmake / linker depenencies for boards 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Jukka Laitinen
700c13cdff Remove linking of arch_io_pins into drivers_board 
This goes the other way around; arch_io_pins is using the pin
definitions from drivers_board, so the drivers_board needs to be linked
into arch_io_pins

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
David Sidrane
25099ce11f fmurt1062-v1:Added GPS driver dropped in move to boardconfig 2022-01-14 07:04:06 -08:00
Daniel Agar
d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar
df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar
daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Daniel Agar
e835a7c4ea boards: enable readline history and tab completion on newer boards 2022-01-03 10:44:32 -05:00
Daniel Agar
8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Daniel Agar
3160e7a3cd Jenkins: run calib_udelay on test rack 2021-12-05 19:42:10 -05:00
Peter van der Perk
ce909b23b1 UAVCANv1 Node implementation work, PNP, Registers and uORB publisher 2021-12-01 09:29:15 -05:00
David Sidrane
bddee78412 nxp_fmurt1062-v1 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane
fa3027537c nxp_fmuk66-v3 socketcan:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane
38f017b12f nxp_fmuk66-v3 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane
3b6a5dbac3 nxp_fmuk66-e socketcan:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane
661512cefe nxp_fmuk66-e nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
Beat Küng
4c03def6e9 boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST 2021-11-23 12:40:22 -05:00
Daniel Agar
f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar
2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
David Sidrane
af6bedaded nxp_fmurt1062:Needs pwm_out 2021-11-05 13:50:02 -04:00
David Sidrane
ff43923567 nxp_fmurt1062-v1:Use Write Back Dcache 2021-11-05 13:50:02 -04:00
David Sidrane
dedad87e82 nxp_fmurt1062-v1:Force no no-unaligned-access 
This results in a load saving (no dcache) of 16.82% at a cost
  of 0.03% Flash, .07% XIP Flash and .45% SRAM

Forced Alighment

With: -mno-unaligned-access

Memory region         Used Size  Region Size  %age Used
           flash:      606568 B         7 MB      8.26%
        flashxip:      622920 B         1 MB     59.41%
            sram:      640848 B       856 KB     73.11%
            itcm:          0 GB         0 GB
            dtcm:          0 GB       128 KB      0.00%

 PID COMMAND                   CP
   0 Idle Task                   87640 20.047   204/  748   0 (  0)  READY  3
   1 hpwork                          0  0.000   332/ 1784 249 (249)  w:sig  3
   2 lpwork                         26  0.008   780/ 1616  50 ( 50)  w:sig  4
   3 init                            0  0.000  1980/ 2928 100 (100)  w:sem  3
   4 wq:manager                      0  0.000   508/ 1256 255 (255)  w:sem  4
 327 navigator                     910  0.204  1124/ 1832 105 (105)  READY  6
  23 wq:lp_default                3479  0.795  1252/ 1920 205 (205)  READY  4
  30 wq:hp_default               23554  5.415  1332/ 1904 237 (237)  READY  4
  47 dataman                         0  0.000   820/ 1208  90 ( 90)  w:sem  4
  57 wq:I2C1                     26849  6.190  1060/ 2336 246 (246)  w:sem  4
  60 wq:I2C2                     24045  5.440   732/ 2336 245 (245)  w:sem  4
  86 wq:SPI1                     47127 10.804  1352/ 2336 253 (253)  w:sem  4
  91 wq:I2C3                      1935  0.436   980/ 2336 244 (244)  w:sem  4
 101 wq:SPI3                      6932  1.585  1028/ 2336 251 (251)  w:sem  4
 237 wq:nav_and_controllers      16743  3.832  1236/ 2240 242 (242)  w:sem  4
 248 wq:rate_ctrl                 9008  2.074  1572/ 1952 255 (255)  w:sem  4
 250 wq:INS0                     37182  8.450  4372/ 6000 241 (241)  w:sem  4
 264 commander                   29395  6.732  1260/ 3224 140 (140)  READY  5
 287 mavlink_if0                 60513 13.828  1876/ 2728 100 (100)  READY  4
 294 mavlink_rcv_if0              5946  1.387  1292/ 4560 175 (175)  READY  4
 307 wq:UART5                     3345  0.770   844/ 1632 229 (229)  READY  4
 370 log_writer_file                 0  0.000   372/ 1176  60 ( 60)  w:sem  3
 369 logger                       2121  0.484  2468/ 3648 230 (230)  READY  3
 393 top                         37523  8.641  3060/ 4080 237 (237)  RUN    3

Processes: 24 total, 10 running, 14 sleeping
CPU usage: 77.08% tasks, 2.87% sched, 20.05% idle
DMA Memory: 5120 total, 1024 used 1024 peak
Uptime: 441.946s total, 87.640s idle

Allow Un-Alighment
With Out: -mno-unaligned-access
Memory region         Used Size  Region Size  %age Used
           flash:      604008 B         7 MB      8.23%   8.26%    +0.03

        flashxip:      622240 B         1 MB     59.34%  59.41%    +0.07
            sram:      636752 B       856 KB     72.64%  73.11%    +0.45
            itcm:          0 GB         0 GB
            dtcm:          0 GB       128 KB      0.00%  0.00%

 PID COMMAND                   CPU(ms) CPU(%)  USED/STACK PRIO(BASE) STATE FD
   0 Idle Task                    2418  3.190   264/  748   0 (  0)  READY  3
   1 hpwork                          0  0.000   332/ 1784 249 (249)  w:sig  3
   2 lpwork                         12  0.004   852/ 1616  50 ( 50)  w:sig  3
   3 init                            0  0.000  1932/ 2928 100 (100)  w:sem  3
   4 wq:manager                      0  0.000   548/ 1256 255 (255)  w:sem  4
 327 navigator                      22  0.203  1052/ 1832 105 (105)  READY  6
  23 wq:lp_default                  83  0.743  1252/ 1920 205 (205)  READY  4
  30 wq:hp_default                 637  5.886  1332/ 1904 237 (237)  READY  4
  47 dataman                         0  0.000   820/ 1208  90 ( 90)  w:sem  4
  57 wq:I2C1                       162  1.063  1060/ 2336 246 (246)  w:sem  4
  60 wq:I2C2                        98  0.500   732/ 2336 245 (245)  w:sem  4
  86 wq:SPI1                      1166 10.771  1352/ 2336 253 (253)  w:sem  4
  91 wq:I2C3                        48  0.437  1060/ 2336 244 (244)  w:sem  4
 101 wq:SPI3                       178  1.653  1028/ 2336 251 (251)  w:sem  4
 237 wq:nav_and_controllers        410  3.781  1324/ 2240 242 (242)  w:sem  4
 248 wq:rate_ctrl                  222  2.050  1572/ 1952 255 (255)  w:sem  4
 250 wq:INS0                       940  8.691  4372/ 6000 241 (241)  w:sem  4
 264 commander                     753  6.475  1472/ 3224 140 (140)  READY  5.03
 287 mavlink_if0                  1440 13.973  1780/ 2728 100 (100)  READY  4
 294 mavlink_rcv_if0               139  1.304  1276/ 4560 175 (175)  READY  4
 307 wq:UART5                       83  0.785   828/ 1632 229 (229)  READY  4
 370 log_writer_file                 0  0.000   372/ 1176  60 ( 60)  w:sem  3
 369 logger                         54  0.493  2468/ 3648 230 (230)  READY  3
 393 top                          1053 10.015  3060/ 4080 237 (237)  RUN    3
 396 mavlink_rcv_if1               166  1.608  1380/ 4560 175 (175)  READY  4
 395 mavlink_if1                  2167 23.459  1812/ 2824 100 (100)  READY  4

Processes: 26 total, 12 running, 14 sleeping
CPU usage: 93.90% tasks, 2.91% sched, 3.19% idle     77.08% tasks, 2.87% sched, 20.05% idle -16.82%
DMA Memory: 5120 total, 1024 used 1024 peak
Uptime: 18.242s total, 2.419s idle
 2021-11-05 13:50:02 -04:00
David Sidrane
4225193456 nxp_fmurt1062-v1:Proper USB HS config 2021-11-05 13:50:02 -04:00
David Sidrane
e2b4e435a9 Build system:Board level control of no-unaligned-access 2021-11-05 13:50:02 -04:00
David Sidrane
d4c2476699 nxp_fmurt1062-v1:init Fix Spelling 2021-11-05 13:50:02 -04:00
David Sidrane
46b208ba21 nxp_fmurt1062-v1:init Define ret indepenent of enabled IP Blocks 2021-11-05 13:50:02 -04:00
David Sidrane
29eb27632a nxpfmurt1062-v1:Add USB dev 2021-11-05 13:50:02 -04:00
Landon Haugh
24cd0c6fa3 Enablement of PX4 SPI driver for UCANS32K146 2021-10-25 08:36:54 -07:00
bresch
6ec9ab11f2 add fw auto-tune module to board configs 2021-10-25 13:41:31 +02:00
Daniel Agar
19952768fb boards: try to keep test boards in sync 2021-10-21 15:59:15 -04:00
David Sidrane
258cde668c nxp_fmurt1062-v1:Pared down boardconfig 2021-10-21 11:04:34 -04:00
David Sidrane
0e29cb31e6 nxp_fmurt1062-v1:Pull more code into XIP Flash 2021-10-21 11:04:34 -04:00
David Sidrane
ff3a76d918 nxp_fmurt1062-v1:Needs to usne ocram Linker script 2021-10-21 11:04:34 -04:00
Landon Haugh
9aaf6e3f3e [NXP_UCANS32K146] Increase usermain stack size to prevent init overrun 2021-10-19 20:17:11 -04:00
Beat Küng
dbd4426271 nxp/fmurt1062-v1: set CONSTRAINED_FLASH 2021-10-18 18:45:19 -04:00
Jari van Ewijk
55910caec5 UCANS32K146: Enable CONFIG_BCH to use EEEPROM as character driver 2021-10-15 05:54:27 -07:00
Peter van der Perk
ed394027b1 UAVCANv1 Include Kconfig & Fix #18396 2021-10-13 21:22:15 -04:00
Daniel Agar
41a4045630
boards: nxp_fmuk66 fix serial_dma_poll 2021-10-13 13:45:39 -04:00
Peter van der Perk
ed5fee1a72 Backport #18311 mc atune 2021-10-07 10:09:01 -04:00
Peter van der Perk
454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk
36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk
5e98f38f78 Kconfig rebase backports 26-09-21 2021-10-07 10:09:01 -04:00
Peter van der Perk
6a1675ac28 Backport #17864 to px4board config 2021-10-07 10:09:01 -04:00
Peter van der Perk
33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk
892d673b45 [Kconfig] fix flash overflow test builds 2021-10-07 10:09:01 -04:00
Peter van der Perk
603d0c594d [Kconfig] fix boards configs 2021-10-07 10:09:01 -04:00
Peter van der Perk
a1247d6bcf [Kconfig] Backport cmake config changes 2021-10-07 10:09:01 -04:00
Peter van der Perk
cc752f11df [Kconfig] python script doesn't remove delta, thus we've to manually add remove deltas 2021-10-07 10:09:01 -04:00
Peter van der Perk
b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00