Alexis Guijarro
006dcfafb7
boards/mro/ctrl-zero-classic: corrections for mRo Control Zero Classic Board ( #22745 )
...
- Build target changed from STM32H743II to STM32H743ZI
- Missing external SPI interface added
- Nonexistent I2C3 interface removed
- I2C4 pins changed
- Red and Green LED lights remapped
- Missing ADC inputs added and already present ones corrected
- CAN Silent interfaces corrected
- Power pins corrected and Level Shifter pin added to enable ICM20948
- Buzzer pin remapped
- HRT channel and PPM pin changed
- RSSI input remapped
- ICM20602 and BMI088 pins corrected
- Serial ports remapped
2024-03-08 14:50:53 -05:00
Silvan Fuhrer
563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-10-02 09:37:06 +02:00
Beat Küng
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
Daniel Agar
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
Daniel Agar
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
Daniel Agar
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
Daniel Agar
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
2022-11-20 20:28:07 -05:00
Daniel Agar
7784cd1f40
boards: mro_ctrl-zero-classic updates to sync with ctrl-zero-h7-oem
2022-04-30 09:40:52 -04:00
achim
1bf16cb4df
boards: add new mRo Control Zero Classic
2022-04-25 21:52:38 -04:00
