Igor Mišić
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
Daniel Agar
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
Daniel Agar
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
Daniel Agar
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com >
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com >
Co-authored-by: alexklimaj <alex@arkelectron.com >
2022-11-20 20:28:07 -05:00
Daniel Agar
5b6e5a0968
boards: NuttX update all boards to preallocated sem holder list
...
- CONFIG_SEM_PREALLOCHOLDERS=32
- CONFIG_SEM_NNESTPRIO=16 (default)
2022-05-31 01:41:07 -07:00
Daniel Agar
a2064cceff
boards: enable early MPU reset on any board potentially not using the PX4 bootloader
2021-12-01 20:13:41 -05:00
David Sidrane
63bedd8e4a
cuav_can-gps-v1 nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
Daniel Agar
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
e3104861df
cuav_can-gps-v1: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
David Sidrane
28030e96e2
cuav_can-gps-v1:UavcanNode app ensure IWDG off in debuger
2021-02-17 22:47:35 -05:00
David Sidrane
5c80b2d3dd
cuav_can-gps-v1:canbootloader - enable SWD and Pause IWDT whils stepping
2021-02-17 22:47:35 -05:00
David Sidrane
878baabce8
cuav GPS use appdes
2021-02-17 22:47:35 -05:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
David Sidrane
7800f94dcb
cuav_can-gps-v1 Use SK6812 Serial PWM LED Driver
2021-01-23 09:30:59 -05:00
David Sidrane
fdba8f1f23
cuav_can-gps-v1:Use corrected pinout
2021-01-23 09:30:59 -05:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
58909b208d
boards: cuav can-gps-v1 add safety button and LED
2021-01-13 22:06:46 -05:00
David Sidrane
1ac70cc72f
can-gps-v1:Correct Memory size used by app and bootloader size
2021-01-13 22:06:46 -05:00
David Sidrane
cdae8bf168
can-gps-v1:Fixed Clock
2021-01-13 22:06:46 -05:00
Daniel Agar
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
Daniel Agar
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
Daniel Agar
0a607bdc67
boards: CUAV CAN_GPS v1.2 cannode (stm32f412) with UAVCAN bootloader
2020-09-23 14:30:54 -04:00
Igor Mišić