fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
PX4-Autopilot/docs/ko/flight_controller/ark_pab.md
Hamish Willee 88d623bedb
Move PX4 Guide source into /docs (#24490) 
* Add vitepress tree

* Update existing workflows so they dont trigger on changes in the docs path

* Add nojekyll, package.json, LICENCE etc

* Add crowdin docs upload/download scripts

* Add docs flaw checker workflows

* Used docs prefix for docs workflows

* Crowdin obvious fixes

* ci: docs move to self hosted runner

runs on a beefy server for faster builds

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: don't run build action for docs or ci changes

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: update runners

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* Add docs/en

* Add docs assets and scripts

* Fix up editlinks to point to PX4 sources

* Download just the translations that are supported

* Add translation sources for zh, uk, ko

* Update latest tranlsation and uorb graphs

* update vitepress to latest

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2025-03-13 16:08:27 +11:00

15 KiB
Raw Blame History

ARK Pixhawk Autopilot Bus Carrier

:::warning PX4 does not manufacture this (or any) autopilot. Contact the manufacturer for hardware support or compliance issues. :::

The ARK Pixhawk Autopilot Bus (PAB) Carrier is a USA-built flight controller carrier board, based on the Pixhawk Autopilot Bus open source standard.

The PAB form factor enables the ARK PAB Carrier to be used with any PAB-compatible flight controller, such as the ARKV6X.

ARKPAB Main Photo

Where To Buy

Order From Ark Electronics (US)

특징

커넥터

  • PAB Board to Board Interface
    • 100 Pin Hirose DF40
    • 40 Pin Hirose DF40
  • Dual Digital Power Module Inputs
    • 5V Input
    • I2C Power Monitor
    • 6 Pin Molex CLIK-Mate
  • Ethernet
    • 100Mbps
    • Built in Magnetics
    • 4 Pin JST-GH
  • Full GPS Plus Safety Switch Port
    • 10 Pin JST-GH
  • Basic GPS Port
    • 6 Pin JST-GH
  • Dual CAN Ports
    • 4 Pin JST-GH
  • Triple Telemetry Ports with Flow - Control
    • 6 Pin JST-GH
  • Eight PWM Outputs
    • 10 Pin JST-GH
  • UART/I2C Port
    • 6 Pin JST-GH
  • I2C Port
    • 4 Pin JST-GH
  • PPM RC Port
    • 3 Pin JST-GH
  • DSM RC Port
    • 3 Pin JST-ZH
  • SPI Port
    • 11 Pin JST-GH
  • ADIO Port
    • 8 Pin JST-GH
  • 디버그 포트
    • 10 Pin JST-SH

크기

  • Without Flight Controller Module
    • 74.0mm x 43.5mm x 12.0mm
    • 22g

전원

  • 5V input on POWER1, POWER2, USB C, and the USB JST-GH connector
    • Input is prioritized in the following order: POWER1 > POWER2 > USB
    • USB C and the USB JST-GH are in parallel
    • Overvoltage protection at 5.8V
    • Undervoltage protection at 3.9V
  • VDD_5V_HIPOWER and VDD_5V_PERIPH can each provide a total of 1.5A across all the connectors

LEDS

  • There are two LEDs on the ARK PAB
    • Red is the ethernet power LED
    • Green is the ethernet activity LED

핀배열

ARKPAB Pinout

POWER1

핀 신호 전압
1(red) VBRICK1 +5.0V
2 (흑) VBRICK1 +5.0V
3 (흑) I2C1_SCL +3.3V
4 (흑) I2C1_SDA +3.3V
5 (흑) GND GND
6 (흑) GND GND

POWER2

핀 신호 전압
1(red) VBRICK2 +5.0V
2 (흑) VBRICK2 +5.0V
3 (흑) I2C2_SCL +3.3V
4 (흑) I2C2_SDA +3.3V
5 (흑) GND GND
6 (흑) GND GND

PWM

핀 신호 전압
1(red) VDD_SERVO (Not Connected) +5.0V
2 (흑) FMU_CH1 +3.3V
3 (흑) FMU_CH2 +3.3V
4 (흑) FMU_CH3 +3.3V
5 (흑) FMU_CH4 +3.3V
6 (흑) FMU_CH5 +3.3V
7 (흑) FMU_CH6 +3.3V
8 (blk) FMU_CH7 +3.3V
9 (blk) FMU_CH8 +3.3V
10 (blk) GND GND

GPS1

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) USART1_TX_GPS1 +3.3V
3 (흑) USART1_RX_GPS1 +3.3V
4 (흑) I2C1_SCL +3.3V
5 (흑) I2C1_SDA +3.3V
6 (흑) nSAFETY_SWITCH_IN +3.3V
7 (흑) nSAFETY_SWITCH_LED_OUT +3.3V
8 (blk) 3V3_FMU +3.3V
9 (blk) BUZZER +5.0V
10 (blk) GND GND

GPS2

핀 신호 전압
1(red) VDD_5V_HIPOWER +5.0V
2 (흑) UART8_TX_GPS2 +3.3V
3 (흑) UART8_RX_GPS2 +3.3V
4 (흑) I2C2_SCL +3.3V
5 (흑) I2C2_SDA +3.3V
6 (흑) GND GND

TELEM1

핀 신호 전압
1(red) VDD_5V_HIPOWER +5.0V
2 (흑) UART7_TX +3.3V
3 (흑) UART7_RX +3.3V
4 (흑) UART7_CTS +3.3V
5 (흑) UART7_RTS +3.3V
6 (흑) GND GND

TELEM2

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) UART5_TX +3.3V
3 (흑) UART5_RX +3.3V
4 (흑) UART5_CTS +3.3V
5 (흑) UART5_RTS +3.3V
6 (흑) GND GND

TELEM3

핀 신호 전압
1(red) VDD_5V_HIPOWER +5.0V
2 (흑) USART2_TX +3.3V
3 (흑) USART2_RX +3.3V
4 (흑) USART2_CTS +3.3V
5 (흑) USART2_RTS +3.3V
6 (흑) GND GND

UART4/I2C3

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) UART4_TX +3.3V
3 (흑) UART4_RX +3.3V
4 (흑) I2C3_SCL +3.3V
5 (흑) I2C3_SDA +3.3V
6 (흑) GND GND

I2C3

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) I2C3_SCL +3.3V
3 (흑) I2C3_SDA +3.3V
4 (흑) GND GND

CAN1

핀 신호 전압
1(red) VDD_5V_HIPOWER +5.0V
2 (흑) CAN1_H +3.3V
3 (흑) CAN1_L +3.3V
4 (흑) GND GND

CAN2

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) CAN2_H +3.3V
3 (흑) CAN2_L +3.3V
4 (흑) GND GND

USB

All signals in parallel with USB C connector

핀 신호 전압
1(red) VBUS_IN +5.0V
2 (흑) USB_N +3.3V
3 (흑) USB_P +3.3V
4 (흑) GND GND

ETH

핀 신호 전압
1(red) ETH_RD_N +50.0V Tolerant
2 (흑) ETH_RD_P +50.0V Tolerant
3 (흑) ETH_TD_N +50.0V Tolerant
4 (흑) ETH_TD_P +50.0V Tolerant

ADIO

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) FMU_CAP +3.3V
3 (흑) BOOTLOADER +3.3V
4 (흑) FMU_RST_REQ +3.3V
5 (흑) nARMED +3.3V
6 (흑) ADC1_3V3 +3.3V
7 (흑) ADC1_6V6 +3.3V
8 (blk) GND GND

RC/SBUS

핀 신호 전압
1(red) VDD_5V_SBUS_RC +5.0V
2 (흑) USART6_RX_SBUS_IN +3.3V
3 (흑) USART6_TX +3.3V
4 (흑) VDD_3V3_SPEKTRUM +3.3V
5 (흑) GND GND

PPM

핀 신호 전압
1(red) VDD_5V_PPM_RC +5.0V
2 (흑) DSM_INPUT/FMU_PPM_INPUT +3.3V
3 (흑) GND GND

DSM

핀 신호 전압
1(red) VDD_3V3_SPEKTRUM +3.3V
2 (흑) GND GND
3 (흑) DSM_INPUT/FMU_PPM_INPUT +3.3V

SPI6

핀 신호 전압
1(red) VDD_5V_PERIPH +5.0V
2 (흑) SPI6_SCK +3.3V
3 (흑) SPI6_MISO +3.3V
4 (흑) SPI6_MOSI +3.3V
5 (흑) SPI6_nCS1 +3.3V
6 (흑) SPI6_nCS2 +3.3V
7 (흑) SPIX_nSYNC +3.3V
8 (blk) SPI6_DRDY1 +3.3V
9 (blk) SPI6_DRDY2 +3.3V
10 (blk) SPI6_nRESET +3.3V
11 (blk) GND GND

디버그 포트

The PX4 System Console and SWD interface run on the FMU Debug port.

The pinouts and connector comply with the Pixhawk Debug Full interface defined in the Pixhawk Connector Standard interface (JST SM10B connector).

핀 신호 전압
1(red) Vtref +3.3V
2 (흑) Console TX (OUT) +3.3V
3 (흑) Console RX (IN) +3.3V
4 (흑) SWDIO +3.3V
5 (흑) SWCLK +3.3V
6 (흑) SWO +3.3V
7 (흑) NFC GPIO +3.3V
8 (blk) PH11 +3.3V
9 (blk) nRST +3.3V
10 (blk) GND GND

For information about using this port see:

ARKPAB Top Down Photo

ARKPAB Bottom Photo

See Also