fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
PX4-Autopilot/docs/uk/flight_controller/pixhack_v3.md
Hamish Willee 88d623bedb
Move PX4 Guide source into /docs (#24490) 
* Add vitepress tree

* Update existing workflows so they dont trigger on changes in the docs path

* Add nojekyll, package.json, LICENCE etc

* Add crowdin docs upload/download scripts

* Add docs flaw checker workflows

* Used docs prefix for docs workflows

* Crowdin obvious fixes

* ci: docs move to self hosted runner

runs on a beefy server for faster builds

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: don't run build action for docs or ci changes

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: update runners

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* Add docs/en

* Add docs assets and scripts

* Fix up editlinks to point to PX4 sources

* Download just the translations that are supported

* Add translation sources for zh, uk, ko

* Update latest tranlsation and uorb graphs

* update vitepress to latest

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2025-03-13 16:08:27 +11:00

3.3 KiB
Raw Blame History

Pixhack V3

:::warning PX4 не розробляє цей (або будь-який інший) автопілот. Contact the manufacturer for hardware support or compliance issues. :::

The CUAV Pixhack V3 flight controller board is a flexible autopilot intended primarily for manufacturers of commercial systems.

The board is a variant of the SOLO Pixhawk® 2 (PH2) flight controller, which is in turn based on the Pixhawk-project FMUv3 open hardware design. It runs PX4 on the NuttX OS, and is fully compatible with both PX4 or ArduPilot® (APM) firmware.

Pixhack V3 has significant improvements with respect to the original design, including better interface layout and the addition of vibration damping and a thermostat system.

Pixhack v3

:::info This flight controller is manufacturer supported. :::

Короткий опис

  • Мікропроцесор:
    • STM32F427
    • STM32F100 (відмовостійкий співпроцесор)
  • Датчики:
    • Акселерометри (3): LS303D, MPU6000, MPU9250/hmc5983
    • Гіроскопи (3): L3GD20, MPU6000, MPU9250
    • Компаси (2): LS303D, MPU9250
    • Барометри (2): MS5611 X2
  • Інтерфейси:
    • MAVLink UART (2)
    • GPS UART (2)
    • DEBUG UART (1)
    • RC IN (для PPM, SBUS, DSM/DSM2)
    • RSSI IN: PWM OR 3.3ADC
    • I2C (2)
    • CAN BUS (1)
    • ADC IN: 3.3В X1 , 6.6В X1
    • PWM OUT: 8 PWM IO + 4 IO
  • Система живлення:
    • PM POWER IN: 4.5 ~ 5.5 В
    • USB POWER IN: 5.0 В +- 0.25В
  • Вага та розміри:
    • Вага: 63г
    • Ширина: 68мм
    • Товщина: 17мм
    • Довжина: 44мм
  • Інші характеристики:
    • Температура роботи: -20 ~ 60°C

Доступність

Плату можна придбати з:

Збірка прошивки

:::tip Most users will not need to build this firmware! It is pre-built and automatically installed by QGroundControl when appropriate hardware is connected. :::

To build PX4 for this target:

make px4_fmu-v3_default

Розпіновки та схеми

Налаштування послідовного порту

UART Пристрій Порт
UART1 /dev/ttyS0 IO debug
USART2 /dev/ttyS1 TELEM1 (керування потоком)
USART3 /dev/ttyS2 TELEM2 (керування потоком)
UART4
UART7 CONSOLE
UART8 SERIAL4