PX4-Autopilot/src/lib/tecs/TECS.cpp

/****************************************************************************
 *
 *   Copyright (c) 2017-2020 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#include "TECS.hpp"

#include <lib/geo/geo.h>

#include <px4_platform_common/defines.h>

using math::constrain;
using math::max;
using math::min;

static constexpr float DT_MIN = 0.001f;	///< minimum allowed value of _dt (sec)
static constexpr float DT_MAX = 1.0f;	///< max value of _dt allowed before a filter state reset is performed (sec)

/**
 * @file TECS.cpp
 *
 * @author Paul Riseborough
 */

/*
 * This function implements a complementary filter to estimate the climb rate when
 * inertial nav data is not available. It also calculates a true airspeed derivative
 * which is used by the airspeed complimentary filter.
 */
void TECS::update_vehicle_state_estimates(float equivalent_airspeed, const float speed_deriv_forward,
		bool altitude_lock, float altitude, float vz)
{
	// calculate the time lapsed since the last update
	uint64_t now = hrt_absolute_time();
	float dt = fmaxf((now - _state_update_timestamp) * 1e-6f, DT_MIN);

	bool reset_altitude = false;

	if (_state_update_timestamp == 0 || dt > DT_MAX) {
		dt = DT_DEFAULT;
		reset_altitude = true;
	}

	if (!altitude_lock) {
		reset_altitude = true;
	}

	if (reset_altitude) {
		_states_initialized = false;
	}

	_state_update_timestamp = now;
	_EAS = equivalent_airspeed;

	// Set the velocity and position state to the the INS data
	_vert_vel_state = -vz;
	_vert_pos_state = altitude;

	// Update and average speed rate of change if airspeed is being measured
	if (PX4_ISFINITE(equivalent_airspeed) && airspeed_sensor_enabled()) {
		_tas_rate_raw = speed_deriv_forward;
		// Apply some noise filtering
		_TAS_rate_filter.update(speed_deriv_forward);
		_tas_rate_filtered = _TAS_rate_filter.getState();

	} else {
		_tas_rate_raw = 0.0f;
		_tas_rate_filtered = 0.0f;
	}
}

void TECS::_update_speed_states(float equivalent_airspeed_setpoint, float equivalent_airspeed, float EAS2TAS)
{
	// Calculate the time in seconds since the last update and use the default time step value if out of bounds
	uint64_t now = hrt_absolute_time();
	const float dt = constrain((now - _speed_update_timestamp) * 1.0e-6f, DT_MIN, DT_MAX);

	// Convert equivalent airspeed quantities to true airspeed
	_EAS_setpoint = equivalent_airspeed_setpoint;
	_TAS_setpoint  = _EAS_setpoint * EAS2TAS;
	_TAS_max   = _equivalent_airspeed_max * EAS2TAS;
	_TAS_min   = _equivalent_airspeed_min * EAS2TAS;

	// If airspeed measurements are not being used, fix the airspeed estimate to the nominal trim airspeed
	if (!PX4_ISFINITE(equivalent_airspeed) || !airspeed_sensor_enabled()) {
		_EAS = _equivalent_airspeed_trim;

	} else {
		_EAS = equivalent_airspeed;
	}

	// If first time through reset airspeed states
	if (_speed_update_timestamp == 0) {
		_tas_rate_state = 0.0f;
		_tas_state = (_EAS * EAS2TAS);
	}

	// Obtain a smoothed TAS estimate using a second order complementary filter

	// Update TAS rate state
	_tas_innov = (_EAS * EAS2TAS) - _tas_state;
	float tas_rate_state_input = _tas_innov * _tas_estimate_freq * _tas_estimate_freq;

	// limit integrator input to prevent windup
	if (_tas_state < 3.1f) {
		tas_rate_state_input = max(tas_rate_state_input, 0.0f);
	}

	// Update TAS state
	_tas_rate_state = _tas_rate_state + tas_rate_state_input * dt;
	float tas_state_input = _tas_rate_state + _tas_rate_raw + _tas_innov * _tas_estimate_freq * 1.4142f;
	_tas_state = _tas_state + tas_state_input * dt;

	// Limit the TAS state to a minimum of 3 m/s
	_tas_state = max(_tas_state, 3.0f);
	_speed_update_timestamp = now;

}

void TECS::_update_speed_setpoint()
{
	// Set the TAS demand to the minimum value if an underspeed or
	// or a uncontrolled descent condition exists to maximise climb rate
	if ((_uncommanded_descent_recovery) || (_underspeed_detected)) {
		_TAS_setpoint = _TAS_min;
	}

	_TAS_setpoint = constrain(_TAS_setpoint, _TAS_min, _TAS_max);

	// Calculate limits for the demanded rate of change of speed based on physical performance limits
	// with a 50% margin to allow the total energy controller to correct for errors.
	float velRateMax = 0.5f * _STE_rate_max / _tas_state;
	float velRateMin = 0.5f * _STE_rate_min / _tas_state;

	_TAS_setpoint_adj = constrain(_TAS_setpoint, _TAS_min, _TAS_max);

	// calculate the demanded true airspeed rate of change based on first order response of true airspeed error
	// if airspeed measurement is not enabled then always set the rate setpoint to zero in order to avoid constant rate setpoints
	if (airspeed_sensor_enabled()) {
		_TAS_rate_setpoint = constrain((_TAS_setpoint_adj - _tas_state) * _airspeed_error_gain, velRateMin, velRateMax);

	} else {
		_TAS_rate_setpoint = 0.0f;
	}

}

void TECS::runAltitudeControllerSmoothVelocity(float alt_sp_amsl_m, float target_climbrate_m_s,
		float target_sinkrate_m_s,
		float alt_amsl)
{
	target_climbrate_m_s = math::min(target_climbrate_m_s, _max_climb_rate);
	target_sinkrate_m_s = math::min(target_sinkrate_m_s, _max_sink_rate);

	const float delta_trajectory_to_target_m = alt_sp_amsl_m - _alt_control_traj_generator.getCurrentPosition();

	float height_rate_target = math::signNoZero<float>(delta_trajectory_to_target_m) *
				   math::trajectory::computeMaxSpeedFromDistance(
					   _jerk_max, _vert_accel_limit, fabsf(delta_trajectory_to_target_m), 0.0f);

	height_rate_target = math::constrain(height_rate_target, -target_sinkrate_m_s, target_climbrate_m_s);

	_alt_control_traj_generator.updateDurations(height_rate_target);
	_alt_control_traj_generator.updateTraj(_dt);

	_hgt_setpoint = _alt_control_traj_generator.getCurrentPosition();
	_hgt_rate_setpoint = (_hgt_setpoint - alt_amsl) * _height_error_gain + _height_setpoint_gain_ff *
			     _alt_control_traj_generator.getCurrentVelocity();
	_hgt_rate_setpoint = math::constrain(_hgt_rate_setpoint, -_max_sink_rate, _max_climb_rate);
}

void TECS::_detect_underspeed()
{
	if (!_detect_underspeed_enabled) {
		_underspeed_detected = false;
		return;
	}

	if (((_tas_state < _TAS_min * 0.9f) && (_last_throttle_setpoint >= _throttle_setpoint_max * 0.95f))
	    || ((_vert_pos_state < _hgt_setpoint) && _underspeed_detected)) {

		_underspeed_detected = true;

	} else {
		_underspeed_detected = false;
	}
}

void TECS::_update_energy_estimates()
{
	// Calculate specific energy demands in units of (m**2/sec**2)
	_SPE_setpoint = _hgt_setpoint * CONSTANTS_ONE_G; // potential energy
	_SKE_setpoint = 0.5f * _TAS_setpoint_adj * _TAS_setpoint_adj; // kinetic energy

	// Calculate total energy error
	_STE_error = _SPE_setpoint - _SPE_estimate + _SKE_setpoint - _SKE_estimate;

	// Calculate the specific energy balance demand which specifies how the available total
	// energy should be allocated to speed (kinetic energy) and height (potential energy)
	// Calculate the specific energy balance error
	_SEB_error = SEB_setpoint() - (_SPE_estimate * _SPE_weighting - _SKE_estimate * _SKE_weighting);

	// Calculate specific energy rate demands in units of (m**2/sec**3)
	_SPE_rate_setpoint = _hgt_rate_setpoint * CONSTANTS_ONE_G; // potential energy rate of change
	_SKE_rate_setpoint = _tas_state * _TAS_rate_setpoint; // kinetic energy rate of change

	// Calculate specific energies in units of (m**2/sec**2)
	_SPE_estimate = _vert_pos_state * CONSTANTS_ONE_G; // potential energy
	_SKE_estimate = 0.5f * _tas_state * _tas_state; // kinetic energy

	// Calculate specific energy rates in units of (m**2/sec**3)
	_SPE_rate = _vert_vel_state * CONSTANTS_ONE_G; // potential energy rate of change
	_SKE_rate = _tas_state * _tas_rate_filtered;// kinetic energy rate of change
}

void TECS::_update_throttle_setpoint()
{
	// Calculate demanded rate of change of total energy, respecting vehicle limits.
	// We will constrain the value below.
	_STE_rate_setpoint = _SPE_rate_setpoint + _SKE_rate_setpoint;

	// Calculate the total energy rate error, applying a first order IIR filter
	// to reduce the effect of accelerometer noise
	_STE_rate_error_filter.update(-_SPE_rate - _SKE_rate + _SPE_rate_setpoint + _SKE_rate_setpoint);
	_STE_rate_error = _STE_rate_error_filter.getState();

	float throttle_setpoint;

	// Calculate the throttle demand
	if (_underspeed_detected) {
		// always use full throttle to recover from an underspeed condition
		throttle_setpoint = _throttle_setpoint_max;

	} else {
		// Adjust the demanded total energy rate to compensate for induced drag rise in turns.
		// Assume induced drag scales linearly with normal load factor.
		// The additional normal load factor is given by (1/cos(bank angle) - 1)
		_STE_rate_setpoint += _load_factor_correction * (_load_factor - 1.f);

		_STE_rate_setpoint = constrain(_STE_rate_setpoint, _STE_rate_min, _STE_rate_max);

		// Calculate a predicted throttle from the demanded rate of change of energy, using the trim throttle
		// as the starting point. Assume:
		// Specific total energy rate = _STE_rate_max is achieved when throttle is set to _throttle_setpoint_max
		// Specific total energy rate = 0 at trim throttle
		// Specific total energy rate = _STE_rate_min is achieved when throttle is set to _throttle_setpoint_min
		float throttle_predicted = 0.0f;

		if (_STE_rate_setpoint >= 0) {
			// throttle is between trim and maximum
			throttle_predicted = _throttle_trim + _STE_rate_setpoint / _STE_rate_max * (_throttle_setpoint_max -
					     _throttle_trim);

		} else {
			// throttle is between trim and minimum
			throttle_predicted = _throttle_trim + _STE_rate_setpoint / _STE_rate_min * (_throttle_setpoint_min -
					     _throttle_trim);

		}

		// Calculate gain scaler from specific energy rate error to throttle
		const float STE_rate_to_throttle = 1.0f / (_STE_rate_max - _STE_rate_min);

		// Add proportional and derivative control feedback to the predicted throttle and constrain to throttle limits
		throttle_setpoint = (_STE_rate_error * _throttle_damping_gain) * STE_rate_to_throttle + throttle_predicted;
		throttle_setpoint = constrain(throttle_setpoint, _throttle_setpoint_min, _throttle_setpoint_max);

		if (airspeed_sensor_enabled()) {
			if (_integrator_gain_throttle > 0.0f) {
				float integ_state_max = _throttle_setpoint_max - throttle_setpoint;
				float integ_state_min = _throttle_setpoint_min - throttle_setpoint;

				float throttle_integ_input = (_STE_rate_error * _integrator_gain_throttle) * _dt *
							     STE_rate_to_throttle;

				// only allow integrator propagation into direction which unsaturates throttle
				if (_throttle_integ_state > integ_state_max) {
					throttle_integ_input = math::min(0.f, throttle_integ_input);

				} else if (_throttle_integ_state < integ_state_min) {
					throttle_integ_input = math::max(0.f, throttle_integ_input);
				}

				// Calculate a throttle demand from the integrated total energy rate error
				// This will be added to the total throttle demand to compensate for steady state errors
				_throttle_integ_state = _throttle_integ_state + throttle_integ_input;

				if (_climbout_mode_active) {
					// During climbout, set the integrator to maximum throttle to prevent transient throttle drop
					// at end of climbout when we transition to closed loop throttle control
					_throttle_integ_state = integ_state_max;
				}

			} else {
				_throttle_integ_state = 0.0f;
			}

		}

		if (airspeed_sensor_enabled()) {
			// Add the integrator feedback during closed loop operation with an airspeed sensor
			throttle_setpoint += _throttle_integ_state;

		} else {
			// when flying without an airspeed sensor, use the predicted throttle only
			throttle_setpoint = throttle_predicted;

		}
	}

	// Rate limit the throttle demand
	if (fabsf(_throttle_slewrate) > 0.01f) {
		const float throttle_increment_limit = _dt * (_throttle_setpoint_max - _throttle_setpoint_min) * _throttle_slewrate;
		throttle_setpoint = constrain(throttle_setpoint, _last_throttle_setpoint - throttle_increment_limit,
					      _last_throttle_setpoint + throttle_increment_limit);
	}

	_last_throttle_setpoint = constrain(throttle_setpoint, _throttle_setpoint_min, _throttle_setpoint_max);
}

void TECS::_detect_uncommanded_descent()
{
	/*
	 * This function detects a condition that can occur when the demanded airspeed is greater than the
	 * aircraft can achieve in level flight. When this occurs, the vehicle will continue to reduce height
	 * while attempting to maintain speed.
	*/

	// Calculate rate of change of total specific energy
	const float STE_rate = _SPE_rate + _SKE_rate;

	// If total energy is very low and reducing, throttle is high, and we are not in an underspeed condition, then enter uncommanded descent recovery mode
	const bool enter_mode = !_uncommanded_descent_recovery && !_underspeed_detected && (_STE_error > 200.0f)
				&& (STE_rate < 0.0f)
				&& (_last_throttle_setpoint >= _throttle_setpoint_max * 0.9f);

	// If we enter an underspeed condition or recover the required total energy, then exit uncommanded descent recovery mode
	const bool exit_mode = _uncommanded_descent_recovery && (_underspeed_detected || (_STE_error < 0.0f));

	if (enter_mode) {
		_uncommanded_descent_recovery = true;

	} else if (exit_mode) {
		_uncommanded_descent_recovery = false;

	}
}

void TECS::_update_pitch_setpoint()
{
	/*
	 * The SKE_weighting variable controls how speed and height control are prioritised by the pitch demand calculation.
	 * A weighting of 1 givea equal speed and height priority
	 * A weighting of 0 gives 100% priority to height control and must be used when no airspeed measurement is available.
	 * A weighting of 2 provides 100% priority to speed control and is used when:
	 * a) an underspeed condition is detected.
	 * b) during climbout where a minimum pitch angle has been set to ensure height is gained. If the airspeed
	 * rises above the demanded value, the pitch angle demand is increased by the TECS controller to prevent the vehicle overspeeding.
	 * The weighting can be adjusted between 0 and 2 depending on speed and height accuracy requirements.
	*/

	// Calculate the specific energy balance rate demand
	const float SEB_rate_setpoint = _SPE_rate_setpoint * _SPE_weighting - _SKE_rate_setpoint * _SKE_weighting;

	// Calculate the specific energy balance rate error
	_SEB_rate_error = SEB_rate_setpoint - (_SPE_rate * _SPE_weighting - _SKE_rate * _SKE_weighting);

	// Calculate derivative from change in climb angle to rate of change of specific energy balance
	const float climb_angle_to_SEB_rate = _tas_state * CONSTANTS_ONE_G;

	if (_integrator_gain_pitch > 0.0f) {
		// Calculate pitch integrator input term
		float pitch_integ_input = _SEB_rate_error * _integrator_gain_pitch;

		// Prevent the integrator changing in a direction that will increase pitch demand saturation
		if (_pitch_setpoint_unc > _pitch_setpoint_max) {
			pitch_integ_input = min(pitch_integ_input, 0.f);

		} else if (_pitch_setpoint_unc < _pitch_setpoint_min) {
			pitch_integ_input = max(pitch_integ_input, 0.f);
		}

		// Update the pitch integrator state.
		_pitch_integ_state = _pitch_integ_state + pitch_integ_input * _dt;

	} else {
		_pitch_integ_state = 0.0f;
	}

	// Calculate a specific energy correction that doesn't include the integrator contribution
	float SEB_rate_correction = _SEB_rate_error * _pitch_damping_gain + _pitch_integ_state + _SEB_rate_ff *
				    SEB_rate_setpoint;

	// During climbout, bias the demanded pitch angle so that a zero speed error produces a pitch angle
	// demand equal to the minimum pitch angle set by the mission plan. This prevents the integrator
	// having to catch up before the nose can be raised to reduce excess speed during climbout.
	if (_climbout_mode_active) {
		SEB_rate_correction += _pitch_setpoint_min * climb_angle_to_SEB_rate;
	}

	// Convert the specific energy balance rate correction to a target pitch angle. This calculation assumes:
	// a) The climb angle follows pitch angle with a lag that is small enough not to destabilise the control loop.
	// b) The offset between climb angle and pitch angle (angle of attack) is constant, excluding the effect of
	// pitch transients due to control action or turbulence.
	_pitch_setpoint_unc = SEB_rate_correction / climb_angle_to_SEB_rate;

	float pitch_setpoint = constrain(_pitch_setpoint_unc, _pitch_setpoint_min, _pitch_setpoint_max);

	// Comply with the specified vertical acceleration limit by applying a pitch rate limit
	const float ptchRateIncr = _dt * _vert_accel_limit / _tas_state;
	_last_pitch_setpoint = constrain(pitch_setpoint, _last_pitch_setpoint - ptchRateIncr,
					 _last_pitch_setpoint + ptchRateIncr);
}

void TECS::_updateTrajectoryGenerationConstraints()
{
	_alt_control_traj_generator.setMaxJerk(_jerk_max);
	_alt_control_traj_generator.setMaxAccel(_vert_accel_limit);
	_alt_control_traj_generator.setMaxVel(fmax(_max_climb_rate, _max_sink_rate));

	_velocity_control_traj_generator.setMaxJerk(_jerk_max);
	_velocity_control_traj_generator.setMaxAccelUp(_vert_accel_limit);
	_velocity_control_traj_generator.setMaxAccelDown(_vert_accel_limit);
	_velocity_control_traj_generator.setMaxVelUp(_max_sink_rate); // different convention for FW than for MC
	_velocity_control_traj_generator.setMaxVelDown(_max_climb_rate); // different convention for FW than for MC
}

void TECS::_calculateHeightRateSetpoint(float altitude_sp_amsl, float height_rate_sp, float target_climbrate,
					float target_sinkrate, float altitude_amsl)
{
	bool control_altitude = true;
	const bool input_is_height_rate = PX4_ISFINITE(height_rate_sp);

	_velocity_control_traj_generator.setVelSpFeedback(_hgt_rate_setpoint);

	if (input_is_height_rate) {
		_velocity_control_traj_generator.setCurrentPositionEstimate(altitude_amsl);
		_velocity_control_traj_generator.update(_dt, height_rate_sp);
		_hgt_rate_setpoint = _velocity_control_traj_generator.getCurrentVelocity();
		altitude_sp_amsl = _velocity_control_traj_generator.getCurrentPosition();
		control_altitude = PX4_ISFINITE(altitude_sp_amsl);

	} else {
		_velocity_control_traj_generator.reset(0, _hgt_rate_setpoint, _hgt_setpoint);
	}


	if (control_altitude) {
		runAltitudeControllerSmoothVelocity(altitude_sp_amsl, target_climbrate, target_sinkrate, altitude_amsl);

	} else {
		_alt_control_traj_generator.setCurrentVelocity(_hgt_rate_setpoint);
		_alt_control_traj_generator.setCurrentPosition(altitude_amsl);
		_hgt_setpoint = altitude_amsl;
	}
}

void TECS::_initialize_states(float pitch, float throttle_trim, float baro_altitude, float pitch_min_climbout,
			      float EAS2TAS)
{
	if (_pitch_update_timestamp == 0 || _dt > DT_MAX || !_states_initialized) {
		// On first time through or when not using TECS of if there has been a large time slip,
		// states must be reset to allow filters to a clean start
		_vert_vel_state = 0.0f;
		_vert_pos_state = baro_altitude;
		_tas_rate_state = 0.0f;
		_tas_state = _EAS * EAS2TAS;
		_last_throttle_setpoint = throttle_trim;
		_last_pitch_setpoint = constrain(pitch, _pitch_setpoint_min, _pitch_setpoint_max);
		_pitch_setpoint_unc = _last_pitch_setpoint;
		_TAS_setpoint_last = _EAS * EAS2TAS;
		_TAS_setpoint_adj = _TAS_setpoint_last;
		_underspeed_detected = false;
		_uncommanded_descent_recovery = false;
		_STE_rate_error = 0.0f;
		_hgt_setpoint = baro_altitude;

		resetIntegrals();

		if (_dt > DT_MAX || _dt < DT_MIN) {
			_dt = DT_DEFAULT;
		}

		resetTrajectoryGenerators(baro_altitude);

	} else if (_climbout_mode_active) {
		// During climbout use the lower pitch angle limit specified by the
		// calling controller
		_pitch_setpoint_min	   = pitch_min_climbout;

		// throttle lower limit is set to a value that prevents throttle reduction
		_throttle_setpoint_min  = _throttle_setpoint_max - 0.01f;

		// airspeed demand states are set to track the measured airspeed
		_TAS_setpoint_last      = _EAS * EAS2TAS;
		_TAS_setpoint_adj       = _EAS * EAS2TAS;

		_hgt_setpoint = baro_altitude;

		// disable speed and decent error condition checks
		_underspeed_detected = false;
		_uncommanded_descent_recovery = false;
	}

	// filter specific energy rate error using first order filter with 0.5 second time constant
	_STE_rate_error_filter.setParameters(DT_DEFAULT, _STE_rate_time_const);
	_STE_rate_error_filter.reset(0.0f);

	// filter true airspeed rate using first order filter with 0.5 second time constant
	_TAS_rate_filter.setParameters(DT_DEFAULT, _speed_derivative_time_const);
	_TAS_rate_filter.reset(0.0f);

	_states_initialized = true;
}

void TECS::_update_STE_rate_lim()
{
	// Calculate the specific total energy upper rate limits from the max throttle climb rate
	_STE_rate_max = _max_climb_rate * CONSTANTS_ONE_G;

	// Calculate the specific total energy lower rate limits from the min throttle sink rate
	_STE_rate_min = - _min_sink_rate * CONSTANTS_ONE_G;
}

void TECS::update_pitch_throttle(float pitch, float baro_altitude, float hgt_setpoint,
				 float EAS_setpoint, float equivalent_airspeed, float eas_to_tas, bool climb_out_setpoint, float pitch_min_climbout,
				 float throttle_min, float throttle_max, float throttle_trim,
				 float pitch_limit_min, float pitch_limit_max,
				 float target_climbrate, float target_sinkrate, float hgt_rate_sp)
{
	// Calculate the time since last update (seconds)
	uint64_t now = hrt_absolute_time();
	_dt = fmaxf((now - _pitch_update_timestamp) * 1e-6f, DT_MIN);

	// Set class variables from inputs
	_throttle_setpoint_max = throttle_max;
	_throttle_setpoint_min = throttle_min;
	_pitch_setpoint_max = pitch_limit_max;
	_pitch_setpoint_min = pitch_limit_min;
	_climbout_mode_active = climb_out_setpoint;
	_throttle_trim = throttle_trim;

	// Initialize selected states and variables as required
	_initialize_states(pitch, throttle_trim, baro_altitude, pitch_min_climbout, eas_to_tas);

	_updateTrajectoryGenerationConstraints();

	// Update the true airspeed state estimate
	_update_speed_states(EAS_setpoint, equivalent_airspeed, eas_to_tas);

	// Calculate rate limits for specific total energy
	_update_STE_rate_lim();

	// Detect an underspeed condition
	_detect_underspeed();

	_update_speed_height_weights();

	// Detect an uncommanded descent caused by an unachievable airspeed demand
	_detect_uncommanded_descent();

	// Calculate the demanded true airspeed
	_update_speed_setpoint();

	_calculateHeightRateSetpoint(hgt_setpoint, hgt_rate_sp, target_climbrate, target_sinkrate, baro_altitude);

	// Calculate the specific energy values required by the control loop
	_update_energy_estimates();

	// Calculate the throttle demand
	_update_throttle_setpoint();

	// Calculate the pitch demand
	_update_pitch_setpoint();

	// Update time stamps
	_pitch_update_timestamp = now;

	// Set TECS mode for next frame
	if (_underspeed_detected) {
		_tecs_mode = ECL_TECS_MODE_UNDERSPEED;

	} else if (_uncommanded_descent_recovery) {
		_tecs_mode = ECL_TECS_MODE_BAD_DESCENT;

	} else if (_climbout_mode_active) {
		_tecs_mode = ECL_TECS_MODE_CLIMBOUT;

	} else {
		// This is the default operation mode
		_tecs_mode = ECL_TECS_MODE_NORMAL;
	}

}

void TECS::_update_speed_height_weights()
{
	// Calculate the weight applied to control of specific kinetic energy error
	_SKE_weighting = constrain(_pitch_speed_weight, 0.0f, 2.0f);

	if ((_underspeed_detected || _climbout_mode_active) && airspeed_sensor_enabled()) {
		_SKE_weighting = 2.0f;

	} else if (!airspeed_sensor_enabled()) {
		_SKE_weighting = 0.0f;
	}

	// don't allow any weight to be larger than one, as it has the same effect as reducing the control
	// loop time constant and therefore can lead to a destabilization of that control loop
	_SPE_weighting = constrain(2.0f - _SKE_weighting, 0.f, 1.f);
	_SKE_weighting = constrain(_SKE_weighting, 0.f, 1.f);
}