eneadev e2989bc091 Update drv_hrt.c ...

TIM3 was not working properly with a custom application and I got it work changing TIM3 HRT_TIMER_POWER_BIT from RCC_APB2ENR_TIM3EN to RCC_APB1ENR_TIM3EN because on datasheet TIM3 is on APB1, I think that you should check also the others

2014-04-19 13:08:29 +02:00

..

airspeed

Fix airspeed sensor

2014-02-15 21:00:48 +01:00

ardrone_interface

actuator_controls_effective topic removed

2013-11-16 23:16:09 +04:00

blinkm

Made low/critical warnings consisting

2013-08-29 16:41:59 +02:00

bma180

Fixed up init sequence of all sensors - we can publish in interrupt context, but not advertise! All advertisements now contain valid data

2014-01-14 15:40:46 +01:00

boards

S.BUS output disable cleanup

2014-01-22 08:30:48 +01:00

device

CDev: Fixed printf format specifier

2014-03-16 18:37:16 +01:00

ets_airspeed

Move changes regarding the filtered airspeed consistently across sensors, use actual air temperature instead of board temperature

2014-03-23 16:56:07 +01:00

frsky_telemetry

global_position topic: added baro_alt, mc_pos_control: SEATBELT mode fixed, use baro/AMSL alt

2014-01-28 20:40:05 +01:00

gps

gps driver: fake mode: lower eph and epv values in order to convince the commander that the gps signal is valid

2014-04-08 11:05:00 +02:00

hil

HIL cleanup

2014-01-11 20:56:40 +01:00

hmc5883

hmc5883: properly reset mag to normal state on calibration fail

2014-04-05 12:11:52 +02:00

hott

Merge remote-tracking branch 'upstream/master' into navigator_new

2014-01-11 00:49:30 +01:00

l3gd20

Fixed up init sequence of all sensors - we can publish in interrupt context, but not advertise! All advertisements now contain valid data

2014-01-14 15:40:46 +01:00

led

Added LED_TOGGLE for normal LEDs

2013-08-15 17:34:49 +02:00

lsm303d

Fixed up init sequence of all sensors - we can publish in interrupt context, but not advertise! All advertisements now contain valid data

2014-01-14 15:40:46 +01:00

mb12xx

Fixed missing reset of poll rate after test exit in ultrasound driver

2014-03-11 10:52:26 +01:00

md25

Fix for md25 and uORB update.

2014-03-20 12:12:42 -04:00

meas_airspeed

airspeed: Prevent the filter from overshooting into the negative airspeed range

2014-04-05 17:02:37 +02:00

mkblctrl

BL-Ctrl 3.0 fix

2014-02-17 21:29:14 +01:00

mpu6000

MPU6000: gyro topic was not initialized

2014-02-16 12:18:22 +01:00

ms5611

Fixed up init sequence of all sensors - we can publish in interrupt context, but not advertise! All advertisements now contain valid data

2014-01-14 15:40:46 +01:00

px4flow

changed px4flow I2C address to default value

2014-03-19 16:13:17 +01:00

px4fmu

Added flag for ARDrone interface.

2014-03-05 10:50:16 +01:00

px4io

px4io: Typo fixed

2014-04-05 17:09:48 +02:00

rgbled

Compile fix

2014-03-17 14:37:32 +01:00

roboclaw

Moved UOrbPubliction/Subscription to uORB::Publication/Subscription

2014-03-20 12:12:42 -04:00

sf0x

sf0x driver: Stop emitting error messages once there is no hope this sensor will recover - continue to output error messages if the errors are just intermittent

2014-04-05 14:30:27 +02:00

stm32

Update drv_hrt.c

2014-04-19 13:08:29 +02:00

drv_accel.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_adc.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_airspeed.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_baro.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_blinkm.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_device.h

Header for publication disable

2014-01-12 11:55:16 +01:00

drv_gpio.h

Added sensor rail reset IOCTL and command (fmu sensor_reset 10 resets for 10 ms)

2013-12-04 08:17:35 +01:00

drv_gps.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_gyro.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_hrt.h

drv_hrt: added hrt_call_init() and hrt_call_delay() APIs

2013-12-10 12:04:26 +01:00

drv_led.h

Added LED_TOGGLE for normal LEDs

2013-08-15 17:34:49 +02:00

drv_mag.h

added error_count field to sensor report structures

2013-09-12 09:25:01 +02:00

drv_mixer.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_orb_dev.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_pwm_output.h

Code style

2014-02-21 08:36:51 +01:00

drv_px4flow.h

added i2c px4flow driver

2014-03-13 15:43:52 +01:00

drv_range_finder.h

added error_count field to sensor report structures

2013-09-12 09:25:01 +02:00

drv_rc_input.h

Differentiate between publication and signal receive timestamp, correctly set the rc_lost flag in the frame. Ready for prime-time testing.

2014-01-26 14:52:46 +01:00

drv_rgbled.h

Changed RGBLED behaviour, breathe mode when disarmed and ready to arm

2013-08-29 16:45:33 +02:00

drv_sbus.h

Add support in the IO driver to control the S.Bus / RSSI port.

2014-01-26 14:22:54 +01:00

drv_sensor.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_tone_alarm.h

tone_alarm: Added arming failure tone

2014-04-05 12:13:50 +02:00