Files
PX4-Autopilot/src/modules/ekf2/ekf2_params_multi.c
T
Daniel Agar 88f8da27ef save learned mag bias per sensor (Multi-EKF support)
- handle saving the mag bias per sensor (across all estimator instances using that mag) in sensors/vehicle_magnetometer
 - this is now saving back to the actual mag calibration CAL_MAGn_OFF{X,Y,Z}
 - ekf2 reset mag mag bias on any magnetometer or calibration change
 - use Kalman filter scheme to update stored mag bias parameters using all available bias estimates for that sensor

Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
2021-01-07 09:54:13 -05:00

59 lines
2.2 KiB
C

/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* Multi-EKF IMUs
*
* Maximum number of IMUs to use for Multi-EKF. Set 0 to disable.
* Requires SENS_IMU_MODE 0.
*
* @group EKF2
* @reboot_required true
* @min 0
* @max 4
*/
PARAM_DEFINE_INT32(EKF2_MULTI_IMU, 0);
/**
* Multi-EKF Magnetometers.
*
* Maximum number of magnetometers to use for Multi-EKF. Set 0 to disable.
* Requires SENS_MAG_MODE 0.
*
* @group EKF2
* @reboot_required true
* @min 0
* @max 4
*/
PARAM_DEFINE_INT32(EKF2_MULTI_MAG, 0);