Files
PX4-Autopilot/src/drivers/barometer/lps33hw/lps33hw.cpp
T
Daniel Agar 0c31f63896 sensors: add baro calibration and cleanup
- sensor_baro.msg use SI (pressure in Pascals)
 - update all barometer drivers to publish directly and remove PX4Barometer helper
 - introduce baro cal (offset) mainly as a mechanism to adjust
relative priority
 - commander: add simple baro cal that sets baro offsets to align with
GPS altitude (if available)
 - create new sensors_status.msg to generalize sensor reporting
2022-03-26 16:08:41 -04:00

218 lines
5.4 KiB
C++

/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include "lps33hw.hpp"
using namespace ST_LPS33HW;
using namespace time_literals;
namespace lps33hw
{
template<typename T>
static void getTwosComplement(T &raw, uint8_t length)
{
if (raw & ((T)1 << (length - 1))) {
raw -= (T)1 << length;
}
}
LPS33HW::LPS33HW(const I2CSPIDriverConfig &config, device::Device *interface) :
I2CSPIDriver(config),
_interface(interface),
_sample_perf(perf_alloc(PC_ELAPSED, MODULE_NAME": read")),
_comms_errors(perf_alloc(PC_COUNT, MODULE_NAME": comm errors")),
_keep_retrying(config.keep_running)
{
}
LPS33HW::~LPS33HW()
{
perf_free(_sample_perf);
perf_free(_comms_errors);
delete _interface;
}
int
LPS33HW::init()
{
uint8_t who_am_i;
int ret = RegisterRead(Register::WHO_AM_I, who_am_i);
if (ret != 0) {
PX4_DEBUG("read failed (%i)", ret);
if (_keep_retrying) {
PX4_INFO("no sensor found, but will keep retrying");
ScheduleNow();
return 0;
}
return ret;
}
if (who_am_i != WHO_AM_I_VALUE) {
PX4_DEBUG("WHO_AM_I mismatch (%i)", who_am_i);
return PX4_ERROR;
}
_state = State::Reset;
ScheduleNow();
return PX4_OK;
}
void
LPS33HW::RunImpl()
{
int ret;
switch (_state) {
case State::Detect:
uint8_t who_am_i;
ret = RegisterRead(Register::WHO_AM_I, who_am_i);
if (ret != 0 || who_am_i != WHO_AM_I_VALUE) {
// periodically retry to detect
ScheduleDelayed(300_ms);
return;
}
ScheduleDelayed(10_ms);
_state = State::Reset;
break;
case State::Reset:
// Soft Reset
ret = RegisterWrite(Register::CTRL_REG2, SWRESET);
if (ret != OK) {
PX4_DEBUG("reset failed");
ScheduleDelayed(100_ms);
_state = State::Detect;
return;
}
ScheduleDelayed(20_ms);
_state = State::WaitForReset;
break;
case State::WaitForReset:
uint8_t val;
ret = RegisterRead(Register::CTRL_REG2, val);
if (ret != 0 || (val & SWRESET) != 0) {
ScheduleDelayed(10_ms);
_state = State::Reset;
return;
}
// Configure sampling rate
ret = RegisterWrite(Register::CTRL_REG1, ODR_75HZ | BDU);
if (ret != 0) {
ScheduleDelayed(10_ms);
_state = State::Detect;
return;
}
ScheduleDelayed(1000000 / SAMPLE_RATE);
_state = State::Running;
break;
case State::Running:
perf_begin(_sample_perf);
uint8_t data[6];
if (_interface->read((uint8_t)Register::STATUS, data, sizeof(data)) != PX4_OK) {
perf_count(_comms_errors);
perf_end(_sample_perf);
ScheduleDelayed(10_ms);
_state = State::Reset;
return;
}
uint8_t status = data[0];
if ((status & P_DA) == 0) { // check if pressure data is available
perf_end(_sample_perf);
ScheduleDelayed(1000000 / SAMPLE_RATE);
return;
}
hrt_abstime timestamp_sample = hrt_absolute_time();
float temp = ((int16_t)data[4] | (data[5] << 8)) / 100.f;
int32_t Praw = (int32_t)data[1] | (data[2] << 8) | (data[3] << 16);
getTwosComplement(Praw, 24);
float pressure_hPa = Praw / 4096.f;
float pressure_pa = pressure_hPa * 100.f;
// publish
sensor_baro_s sensor_baro{};
sensor_baro.timestamp_sample = timestamp_sample;
sensor_baro.device_id = _interface->get_device_id();
sensor_baro.pressure = pressure_pa;
sensor_baro.temperature = temp;
sensor_baro.error_count = perf_event_count(_comms_errors);
sensor_baro.timestamp = hrt_absolute_time();
_sensor_baro_pub.publish(sensor_baro);
perf_end(_sample_perf);
ScheduleDelayed(1000000 / SAMPLE_RATE);
break;
}
}
int
LPS33HW::RegisterRead(Register reg, uint8_t &val)
{
return _interface->read((uint8_t)reg, &val, 1);
}
int
LPS33HW::RegisterWrite(Register reg, uint8_t value)
{
return _interface->write((uint8_t)reg, &value, 1);
}
void
LPS33HW::print_status()
{
I2CSPIDriverBase::print_status();
perf_print_counter(_sample_perf);
perf_print_counter(_comms_errors);
}
} // namespace lps33hw