/**************************************************************************** * * Copyright (c) 2020 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name PX4 nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #include "lps33hw.hpp" using namespace ST_LPS33HW; using namespace time_literals; namespace lps33hw { template static void getTwosComplement(T &raw, uint8_t length) { if (raw & ((T)1 << (length - 1))) { raw -= (T)1 << length; } } LPS33HW::LPS33HW(const I2CSPIDriverConfig &config, device::Device *interface) : I2CSPIDriver(config), _interface(interface), _sample_perf(perf_alloc(PC_ELAPSED, MODULE_NAME": read")), _comms_errors(perf_alloc(PC_COUNT, MODULE_NAME": comm errors")), _keep_retrying(config.keep_running) { } LPS33HW::~LPS33HW() { perf_free(_sample_perf); perf_free(_comms_errors); delete _interface; } int LPS33HW::init() { uint8_t who_am_i; int ret = RegisterRead(Register::WHO_AM_I, who_am_i); if (ret != 0) { PX4_DEBUG("read failed (%i)", ret); if (_keep_retrying) { PX4_INFO("no sensor found, but will keep retrying"); ScheduleNow(); return 0; } return ret; } if (who_am_i != WHO_AM_I_VALUE) { PX4_DEBUG("WHO_AM_I mismatch (%i)", who_am_i); return PX4_ERROR; } _state = State::Reset; ScheduleNow(); return PX4_OK; } void LPS33HW::RunImpl() { int ret; switch (_state) { case State::Detect: uint8_t who_am_i; ret = RegisterRead(Register::WHO_AM_I, who_am_i); if (ret != 0 || who_am_i != WHO_AM_I_VALUE) { // periodically retry to detect ScheduleDelayed(300_ms); return; } ScheduleDelayed(10_ms); _state = State::Reset; break; case State::Reset: // Soft Reset ret = RegisterWrite(Register::CTRL_REG2, SWRESET); if (ret != OK) { PX4_DEBUG("reset failed"); ScheduleDelayed(100_ms); _state = State::Detect; return; } ScheduleDelayed(20_ms); _state = State::WaitForReset; break; case State::WaitForReset: uint8_t val; ret = RegisterRead(Register::CTRL_REG2, val); if (ret != 0 || (val & SWRESET) != 0) { ScheduleDelayed(10_ms); _state = State::Reset; return; } // Configure sampling rate ret = RegisterWrite(Register::CTRL_REG1, ODR_75HZ | BDU); if (ret != 0) { ScheduleDelayed(10_ms); _state = State::Detect; return; } ScheduleDelayed(1000000 / SAMPLE_RATE); _state = State::Running; break; case State::Running: perf_begin(_sample_perf); uint8_t data[6]; if (_interface->read((uint8_t)Register::STATUS, data, sizeof(data)) != PX4_OK) { perf_count(_comms_errors); perf_end(_sample_perf); ScheduleDelayed(10_ms); _state = State::Reset; return; } uint8_t status = data[0]; if ((status & P_DA) == 0) { // check if pressure data is available perf_end(_sample_perf); ScheduleDelayed(1000000 / SAMPLE_RATE); return; } hrt_abstime timestamp_sample = hrt_absolute_time(); float temp = ((int16_t)data[4] | (data[5] << 8)) / 100.f; int32_t Praw = (int32_t)data[1] | (data[2] << 8) | (data[3] << 16); getTwosComplement(Praw, 24); float pressure_hPa = Praw / 4096.f; float pressure_pa = pressure_hPa * 100.f; // publish sensor_baro_s sensor_baro{}; sensor_baro.timestamp_sample = timestamp_sample; sensor_baro.device_id = _interface->get_device_id(); sensor_baro.pressure = pressure_pa; sensor_baro.temperature = temp; sensor_baro.error_count = perf_event_count(_comms_errors); sensor_baro.timestamp = hrt_absolute_time(); _sensor_baro_pub.publish(sensor_baro); perf_end(_sample_perf); ScheduleDelayed(1000000 / SAMPLE_RATE); break; } } int LPS33HW::RegisterRead(Register reg, uint8_t &val) { return _interface->read((uint8_t)reg, &val, 1); } int LPS33HW::RegisterWrite(Register reg, uint8_t value) { return _interface->write((uint8_t)reg, &value, 1); } void LPS33HW::print_status() { I2CSPIDriverBase::print_status(); perf_print_counter(_sample_perf); perf_print_counter(_comms_errors); } } // namespace lps33hw