mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-03 13:48:54 +08:00
154 lines
6.0 KiB
Markdown
154 lines
6.0 KiB
Markdown
# MicoAir743-Lite
|
||
|
||
<Badge type="tip" text="PX4 v1.17" />
|
||
|
||
:::warning
|
||
PX4 не розробляє цей (або будь-який інший) автопілот.
|
||
Contact the [manufacturer](https://micoair.com/) for hardware support or compliance issues.
|
||
:::
|
||
|
||
MicoAir743-Lite is an ultra-high performance H743 flight controller with an unbeatable price, featuring the ICM45686 IMU sensor and integrated Bluetooth telemetry.
|
||
|
||
|
||
|
||
Equipped with a high-performance H7 processor, the MicoAir743-Lite features a compact form factor with SH1.0 connectors (which are more suitable than Pixhawk-standard GH1.25 for this board size).
|
||
When paired with Bluetooth telemetry, the board can be debugged with a phone or PC.
|
||
|
||
:::info
|
||
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
|
||
:::
|
||
|
||
## MicoAir743-Lite (v1.1)
|
||
|
||
|
||
|
||
## Короткий опис
|
||
|
||
### Processors & Sensors
|
||
|
||
- FMU Processor: STM32H743
|
||
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
|
||
- Сенсори на платі
|
||
- Accel/Gyro: ICM-45686 (with BalancedGyro™ Technology)
|
||
- Barometer: SPA06
|
||
- On-board Bluetooth Telemetry
|
||
- Connected to UART8 internally, baudrate 115200
|
||
- Connecting to QGC (PC or Android phone) via Bluetooth
|
||
- Інші характеристики:
|
||
- Operating & storage temperature: -20 ~ 85°c
|
||
|
||
### Інтерфейси
|
||
|
||
- 8 UART (TELEM / GPS / RC)
|
||
- 14 PWM outputs （10 supports DShot）
|
||
- Support multiple RC inputs (SBUS / CRSF / DSM)
|
||
- 1 GPS port
|
||
- 1 I2C порт
|
||
- 2 ADC port2 (VBAT, Current)
|
||
- 1 DJI O3/O4 VTX connector
|
||
- 1 MicroSD Card Slot
|
||
- 1 USB Type-C
|
||
|
||
### Електричні дані
|
||
|
||
- VBAT Input:
|
||
- 2\~6S (6\~27V)
|
||
- USB Power Input:
|
||
- 4.75\~5.25V
|
||
- BEC Output:
|
||
- 5V 2A (for controller, receiver, GPS, optical flow or other devices)
|
||
- 9V 2A (for video transmitter, camera)
|
||
|
||
### Механічні характеристики
|
||
|
||
- Mounting: 30.5 x 30.5mm, Φ4mm
|
||
- Dimensions: 36 x 36 x 8 mm
|
||
- Weight: 10g
|
||
|
||
|
||
|
||
## Where to Buy {#store}
|
||
|
||
Order from [MicoAir Tech Store](https://store.micoair.com/product/micoair743-lite/).
|
||
|
||
## Схема розташування виводів
|
||
|
||
Pinouts definition can be found in the [MicoAir743-Lite_pinout.xlsx](https://raw.githubusercontent.com/PX4/PX4-Autopilot/refs/heads/main/docs/assets/flight_controller/micoair743_lite/micoair743_lite_pinout.xlsx) file.
|
||
|
||
## Налаштування послідовного порту
|
||
|
||
| UART | Пристрій | Порт |
|
||
| ------ | ---------- | ------ |
|
||
| USART1 | /dev/ttyS0 | TELEM1 |
|
||
| USART2 | /dev/ttyS1 | GPS2 |
|
||
| USART3 | /dev/ttyS2 | GPS1 |
|
||
| UART4 | /dev/ttyS3 | TELEM2 |
|
||
| UART5 | /dev/ttyS4 | TELEM3 |
|
||
| USART6 | /dev/ttyS5 | RC |
|
||
| UART7 | /dev/ttyS6 | UART6 |
|
||
| UART8 | /dev/ttyS7 | TELEM4 |
|
||
|
||
## Interfaces Diagram
|
||
|
||
:::info
|
||
All the connectors used on the board are SH1.0
|
||
:::
|
||
|
||
|
||
|
||
## Зразок схеми з'єднань
|
||
|
||
|
||
|
||
## Збірка прошивки
|
||
|
||
To [build PX4](../dev_setup/building_px4.md) for this target:
|
||
|
||
```sh
|
||
make micoair_h743-lite_default
|
||
```
|
||
|
||
## Встановлення прошивки PX4
|
||
|
||
Прошивку можна встановити будь-якими звичайними способами:
|
||
|
||
- Збудуйте та завантажте джерело
|
||
|
||
```sh
|
||
make micoair_h743-lite_default upload
|
||
```
|
||
|
||
- [Load the firmware](../config/firmware.md) using _QGroundControl_.
|
||
Ви можете використовувати або готове вбудоване програмне забезпечення, або власне користувацьке програмне забезпечення.
|
||
|
||
::: info
|
||
At time of writing the only pre-built software is `PX4 main` (see [Installing PX4 Main, Beta or Custom Firmware](../config/firmware.md#installing-px4-main-beta-or-custom-firmware)).
|
||
Release builds will be supported for PX4 v1.17 and later.
|
||
|
||
:::
|
||
|
||
## Радіоуправління
|
||
|
||
A [Radio Control (RC) system](../getting_started/rc_transmitter_receiver.md) is required if you want to manually control your vehicle (PX4 does not require a radio system for autonomous flight modes).
|
||
|
||
The RC port is connected to the FMU and you can attach a receiver that uses the protocols `DSM`, `SBUS`, `CSRF`, `GHST`, or other protocol listed in [Radio Control modules](../modules/modules_driver_radio_control.md).
|
||
You will need to enable the protocol by setting the corresponding parameter `RC_xxxx_PRT_CFG`, such as [RC_CRSF_PRT_CFG](../advanced_config/parameter_reference.md#RC_CRSF_PRT_CFG) for a [CRSF receiver](../telemetry/crsf_telemetry.md).
|
||
|
||
## Підтримувані платформи / Конструкції
|
||
|
||
Будь-який мультикоптер / літак / наземна платформа / човен, який може керуватися звичайними RC сервоприводами або сервоприводами Futaba S-Bus.
|
||
The complete set of supported configurations can be seen in the [Airframes Reference](../airframes/airframe_reference.md).
|
||
|
||
## Периферійні пристрої
|
||
|
||
- [MicoAir Telemetry Radio Modules](https://micoair.com/radio_telemetry/)
|
||
- [MicoAir Optical & Range Sensor](https://micoair.com/optical_range_sensor/)
|
||
- [MicoAir GPS](https://micoair.com/gps/)
|
||
- [MicoAir ESC Modules](https://micoair.com/esc/)
|
||
|
||
## Подальша інформація
|
||
|
||
- [MicoAir Tech.](https://micoair.com/)
|
||
- [Details about MicoAir743-Lite](https://micoair.com/flightcontroller_micoair743lite/)
|
||
- [QGroundControl Download and Install](https://docs.qgroundcontrol.com/Stable_V5.0/en/qgc-user-guide/getting_started/download_and_install.html)
|