fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
PX4-Autopilot/docs/uk/flight_controller/ark_pab.md
Hamish Willee 88d623bedb
Move PX4 Guide source into /docs (#24490) 
* Add vitepress tree

* Update existing workflows so they dont trigger on changes in the docs path

* Add nojekyll, package.json, LICENCE etc

* Add crowdin docs upload/download scripts

* Add docs flaw checker workflows

* Used docs prefix for docs workflows

* Crowdin obvious fixes

* ci: docs move to self hosted runner

runs on a beefy server for faster builds

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: don't run build action for docs or ci changes

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: update runners

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* Add docs/en

* Add docs assets and scripts

* Fix up editlinks to point to PX4 sources

* Download just the translations that are supported

* Add translation sources for zh, uk, ko

* Update latest tranlsation and uorb graphs

* update vitepress to latest

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2025-03-13 16:08:27 +11:00

326 lines
16 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# ARK Pixhawk Autopilot Bus Carrier
:::warning
PX4 не розробляє цей (або будь-який інший) автопілот.
Contact the [manufacturer](https://arkelectron.com/contact-us/) for hardware support or compliance issues.
:::
The [ARK Pixhawk Autopilot Bus (PAB) Carrier](https://arkelectron.gitbook.io/ark-documentation/flight-controllers/ark-pixhawk-autopilot-bus-carrier) is a USA-built flight controller carrier board, based on the [Pixhawk Autopilot Bus open source standard](https://github.com/pixhawk/Pixhawk-Standards).
The PAB form factor enables the ARK PAB Carrier to be used with any [PAB-compatible flight controller](../flight_controller/pixhawk_autopilot_bus.md), such as the [ARKV6X](../flight_controller/ark_v6x.md).
![ARKPAB Main Photo](../../assets/flight_controller/arkpab/ark_pab_main.jpg)
### Де купити
Order From [Ark Electronics](https://arkelectron.com/product/ark-pixhawk-autopilot-bus-carrier/) (US)
## Функції
- [Pixhawk Autopilot Bus (PAB) Form Factor](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-010%20Pixhawk%20Autopilot%20Bus%20Standard.pdf?_ga=2.20605755.2081055420.1671562222-391294592.1671562222)
- USA Built
## З’єднання
- Інтерфейс PAB Board to Board
- 100 Pin Hirose DF40
- 40 Pin Hirose DF40
- Подвійні входи цифрового модуля живлення
- Вхід 5В
- Монітор живлення I2C
- 6-контактний Molex CLIK-Mate
- Ethernet
- 100Mbps
- Built in Magnetics
- 4-контактний JST-GH
- Повноцінний порт перемикача безпеки GPS Plus
- 10-контактний JST-GH
- Базовий порт GPS
- 6-контактний JST-GH
- Подвійні CAN порти
- 4-контактний JST-GH
- Потрійні телеметричні порти з контролем потоку
- 6-контактний JST-GH
- Вісім ШІМ-виходів
- 10-контактний JST-GH
- UART/I2C порт
- 6-контактний JST-GH
- I2C порт
- 4-контактний JST-GH
- PPM RC порт
- 3-контактний JST-GH
- DSM RC порт
- 3-контактний JST-GH
- SPI порт
- 11-контактний JST-GH
- ADIO порт
- 8-контактний JST-GH
- Відладочний порт
- 10-контактний JST-SH
## Розміри
- Без модуля польотного контролера
- 74.0мм х 43.5мм х 12,0мм
- 22г
## Power
- 5V input on `POWER1`, `POWER2`, `USB C`, and the `USB JST-GH` connector
- Input is prioritized in the following order: POWER1 > POWER2 > USB
- `USB C` and the `USB JST-GH` are in parallel
- Захист від перенапруги при 5,8 В
- Захист від зниженої напруги 3,9 В
- `VDD_5V_HIPOWER` and `VDD_5V_PERIPH` can each provide a total of 1.5A across all the connectors
## Cвітлодіоди
- На ARK PAB є два світлодіода
- `Red` is the ethernet power LED
- `Green` is the ethernet activity LED
## Схема розташування виводів
![ARKPAB Pinout](../../assets/flight_controller/arkpab/arkpab_pinout.jpg)
## POWER1
| Pin | Сигнал | Вольтаж |
| -------------------------- | ----------------------------- | --------------------- |
| 1 (red) | `VBRICK1` | +5.0В |
| 2 (blk) | `VBRICK1` | +5.0В |
| 3 (blk) | I2C1_SCL | +3.3V |
| 4 (blk) | I2C1_SDA | +3.3V |
| 5 (blk) | `GND` | GND |
| 6 (blk) | `GND` | GND |
## POWER2
| Pin | Сигнал | Вольтаж |
| -------------------------- | ----------------------------- | --------------------- |
| 1 (red) | `VBRICK2` | +5.0В |
| 2 (blk) | `VBRICK2` | +5.0В |
| 3 (blk) | I2C2_SCL | +3.3V |
| 4 (blk) | I2C2_SDA | +3.3V |
| 5 (blk) | `GND` | GND |
| 6 (blk) | `GND` | GND |
## PWM
| Pin | Сигнал | Вольтаж |
| ------------------------------ | ------------------------------------------------------------------ | --------------------- |
| 1 (red) | VDD_SERVO (не підключений) | +5.0В |
| 2 (blk) | FMU_CH1 | +3.3V |
| 3 (blk) | FMU_CH2 | +3.3V |
| 4 (blk) | FMU_CH3 | +3.3V |
| 5 (blk) | FMU_CH4 | +3.3V |
| 6 (blk) | FMU_CH5 | +3.3V |
| 7 (blk) | FMU_CH6 | +3.3V |
| 8 (чорний) | FMU_CH7 | +3.3V |
| 9 (чорний) | FMU_CH8 | +3.3V |
| 10 (чорний) | `GND` | GND |
## GPS1
| Pin | Сигнал | Вольтаж |
| ------------------------------ | ------------------------------------------------------------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | USART1_TX_GPS1 | +3.3V |
| 3 (blk) | USART1_RX_GPS1 | +3.3V |
| 4 (blk) | I2C1_SCL | +3.3V |
| 5 (blk) | I2C1_SDA | +3.3V |
| 6 (blk) | nSAFETY_SWITCH_IN | +3.3V |
| 7 (blk) | nSAFETY_SWITCH_LED_OUT | +3.3V |
| 8 (чорний) | `3V3_FMU` | +3.3V |
| 9 (чорний) | BUZZER | +5.0В |
| 10 (чорний) | `GND` | GND |
## GPS2
| Pin | Сигнал | Вольтаж |
| -------------------------- | ------------------------------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_HIPOWER` | +5.0В |
| 2 (blk) | UART8_TX_GPS2 | +3.3V |
| 3 (blk) | UART8_RX_GPS2 | +3.3V |
| 4 (blk) | I2C2_SCL | +3.3V |
| 5 (blk) | I2C2_SDA | +3.3V |
| 6 (blk) | `GND` | GND |
## TELEM1
| Pin | Сигнал | Вольтаж |
| -------------------------- | ------------------------------ | --------------------- |
| 1 (red) | `VDD_5V_HIPOWER` | +5.0В |
| 2 (blk) | UART7_TX | +3.3V |
| 3 (blk) | UART7_RX | +3.3V |
| 4 (blk) | UART7_CTS | +3.3V |
| 5 (blk) | UART7_RTS | +3.3V |
| 6 (blk) | `GND` | GND |
## TELEM2
| Pin | Сигнал | Вольтаж |
| -------------------------- | ------------------------------ | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | UART5_TX | +3.3V |
| 3 (blk) | UART5_RX | +3.3V |
| 4 (blk) | UART5_CTS | +3.3V |
| 5 (blk) | UART5_RTS | +3.3V |
| 6 (blk) | `GND` | GND |
## TELEM3
| Pin | Сигнал | Вольтаж |
| -------------------------- | ------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_HIPOWER` | +5.0В |
| 2 (blk) | USART2_TX | +3.3V |
| 3 (blk) | USART2_RX | +3.3V |
| 4 (blk) | USART2_CTS | +3.3V |
| 5 (blk) | USART2_RTS | +3.3V |
| 6 (blk) | `GND` | GND |
## UART4/I2C3
| Pin | Сигнал | Вольтаж |
| -------------------------- | ----------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | UART4_TX | +3.3V |
| 3 (blk) | UART4_RX | +3.3V |
| 4 (blk) | I2C3_SCL | +3.3V |
| 5 (blk) | I2C3_SDA | +3.3V |
| 6 (blk) | `GND` | GND |
## I2C3
| Pin | Сигнал | Вольтаж |
| -------------------------- | ----------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | I2C3_SCL | +3.3V |
| 3 (blk) | I2C3_SDA | +3.3V |
| 4 (blk) | `GND` | GND |
## CAN1
| Pin | Сигнал | Вольтаж |
| -------------------------- | --------------------------- | --------------------- |
| 1 (red) | `VDD_5V_HIPOWER` | +5.0В |
| 2 (blk) | CAN1_H | +3.3V |
| 3 (blk) | CAN1_L | +3.3V |
| 4 (blk) | `GND` | GND |
## CAN2
| Pin | Сигнал | Вольтаж |
| -------------------------- | --------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | CAN2_H | +3.3V |
| 3 (blk) | CAN2_L | +3.3V |
| 4 (blk) | `GND` | GND |
## USB
Всі сигнали паралельно з роз'ємом USB C
| Pin | Сигнал | Вольтаж |
| -------------------------- | -------------------------- | --------------------- |
| 1 (red) | `VBUS_IN` | +5.0В |
| 2 (blk) | USB_N | +3.3V |
| 3 (blk) | USB_P | +3.3V |
| 4 (blk) | `GND` | GND |
## ETH
| Pin | Сигнал | Вольтаж |
| -------------------------- | -------------------------------------------------- | ---------------------------------------- |
| 1 (red) | ETH_RD_N | +50.0В допустима напруга |
| 2 (blk) | ETH_RD_P | +50.0В допустима напруга |
| 3 (blk) | ETH_TD_N | +50.0В допустима напруга |
| 4 (blk) | ETH_TD_P | +50.0В допустима напруга |
## ADIO
| Pin | Сигнал | Вольтаж |
| ----------------------------- | ----------------------------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | FMU_CAP | +3.3V |
| 3 (blk) | BOOTLOADER | +3.3V |
| 4 (blk) | FMU_RST_REQ | +3.3V |
| 5 (blk) | nARMED | +3.3V |
| 6 (blk) | ADC1_3V3 | +3.3V |
| 7 (blk) | ADC1_6V6 | +3.3V |
| 8 (чорний) | `GND` | GND |
## RC/SBUS
| Pin | Сигнал | Вольтаж |
| -------------------------- | -------------------------------------------------------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_SBUS_RC` | +5.0В |
| 2 (blk) | USART6_RX_SBUS_IN | +3.3V |
| 3 (blk) | USART6_TX | +3.3V |
| 4 (blk) | `VDD_3V3_SPEKTRUM` | +3.3V |
| 5 (blk) | `GND` | GND |
## PPM
| Pin | Сигнал | Вольтаж |
| -------------------------- | -------------------------------------------------------------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PPM_RC` | +5.0В |
| 2 (blk) | DSM_INPUT/FMU_PPM_INPUT | +3.3V |
| 3 (blk) | `GND` | GND |
## DSM
| Pin | Сигнал | Вольтаж |
| -------------------------- | -------------------------------------------------------------------------------------- | --------------------- |
| 1 (red) | `VDD_3V3_SPEKTRUM` | +3.3V |
| 2 (blk) | `GND` | GND |
| 3 (blk) | DSM_INPUT/FMU_PPM_INPUT | +3.3V |
## SPI6
| Pin | Сигнал | Вольтаж |
| ------------------------------ | -------------------------------- | --------------------- |
| 1 (red) | `VDD_5V_PERIPH` | +5.0В |
| 2 (blk) | SPI6_SCK | +3.3V |
| 3 (blk) | SPI6_MISO | +3.3V |
| 4 (blk) | SPI6_MOSI | +3.3V |
| 5 (blk) | SPI6_nCS1 | +3.3V |
| 6 (blk) | SPI6_nCS2 | +3.3V |
| 7 (blk) | SPIX_nSYNC | +3.3V |
| 8 (чорний) | SPI6_DRDY1 | +3.3V |
| 9 (чорний) | SPI6_DRDY2 | +3.3V |
| 10 (чорний) | SPI6_nRESET | +3.3V |
| 11 (blk) | `GND` | GND |
## Відладочний порт
The [PX4 System Console](../debug/system_console.md) and [SWD interface](../debug/swd_debug.md) run on the **FMU Debug** port.
The pinouts and connector comply with the [Pixhawk Debug Full](../debug/swd_debug.md#pixhawk-debug-full) interface defined in the [Pixhawk Connector Standard](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf) interface (JST SM10B connector).
| Pin | Сигнал | Вольтаж |
| ------------------------------ | ----------------------------------- | --------------------- |
| 1 (red) | `Vtref` | +3.3V |
| 2 (blk) | Console TX (OUT) | +3.3V |
| 3 (blk) | Console RX (IN) | +3.3V |
| 4 (blk) | `SWDIO` | +3.3V |
| 5 (blk) | `SWCLK` | +3.3V |
| 6 (blk) | `SWO` | +3.3V |
| 7 (blk) | NFC GPIO | +3.3V |
| 8 (чорний) | PH11 | +3.3V |
| 9 (чорний) | nRST | +3.3V |
| 10 (чорний) | `GND` | GND |
Інформацію про використання цього порту див:
- [SWD Debug Port](../debug/swd_debug.md)
- [PX4 System Console](../debug/system_console.md) (Note, the FMU console maps to USART3).
![ARKPAB Top Down Photo](../../assets/flight_controller/arkpab/ark_pab_top.jpg)
![ARKPAB Bottom Photo](../../assets/flight_controller/arkpab/ark_pab_back.jpg)
## Дивіться також
- [ARK Pixhawk Autopilot Bus Carrier](https://arkelectron.gitbook.io/ark-documentation/flight-controllers/ark-pixhawk-autopilot-bus-carrier) (ARK Docs)
Reference in New Issue View Git Blame Copy Permalink