mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-05-19 20:39:05 +08:00
63 lines
2.4 KiB
Markdown
63 lines
2.4 KiB
Markdown
# ARK DAN GPS
|
|
|
|
[ARK DAN GPS](https://arkelectron.gitbook.io/ark-documentation/gps/ark-dan-gps) is a made in the USA and NDAA-compliant [GNSS/GPS](../gps_compass/index.md) u-blox DAN-F10N GPS and industrial magnetometer.
|
|
|
|
|
|
|
|
## 구매처
|
|
|
|
Order this module from:
|
|
|
|
- [ARK Electronics](https://arkelectron.com/product/ark-dan-gps/) (US)
|
|
|
|
## Hardware Specifications
|
|
|
|
- [Open Source Schematic and BOM](https://github.com/ARK-Electronics/ARK_DAN_GPS)
|
|
- 센서
|
|
- [u-blox DAN-F10N](https://www.u-blox.com/en/product/dan-f10n-module)
|
|
- L1/L5/E5a/B2a bands
|
|
- Consistently strong performance regardless of installation
|
|
- Integrated SAW-LNA-SAW for exceptional out-of-band jamming immunity
|
|
- u-blox F10 proprietary dual-band multipath mitigation technology
|
|
- [ST IIS2MDC Magnetometer](https://www.st.com/en/mems-and-sensors/iis2mdc.html)
|
|
- Pixhawk Standard UART/I2C Connector (6 Pin JST SH)
|
|
- Power Requirements
|
|
- 5V
|
|
- 25mA Average
|
|
- 44mA Max
|
|
- LED Indicators
|
|
- GPS Fix
|
|
- USA Built
|
|
- NDAA Compliant
|
|
- 6 Pin Pixhawk Standard UART/I2C Cable
|
|
|
|
## 하드웨어 설정
|
|
|
|
The module comes with a Pixhawk-standard 6pin connector that will plug into the `GPS2` port on recent Pixhawk flight controllers.
|
|
It should be mounted front facing, as far away from the flight controller and other electronics as possible.
|
|
|
|
For more information see [Mounting the GNSS/Compass](../gps_compass/index.md#mounting-the-gnss-compass) and [Hardware Setup](../gps_compass/index.md#hardware-setup).
|
|
|
|
## PX4 설정
|
|
|
|
The module should be plug-n-play when used with the `GPS2` port on most flight controllers.
|
|
|
|
[Secondary GPS Configuration (UART)](../gps_compass/index.md#secondary-gps-configuration-uart) explains how you can configure the port if the GPS is not detected (note, that the configuration is the same, even if you are using GPS 2 as the primary compass).
|
|
|
|
## 핀배열
|
|
|
|
### Pixhawk Standard UART/I2C Connector - 6 Pin JST-SH
|
|
|
|
| Pin Number | Signal Name | 전압 |
|
|
| ---------- | ----------- | -------------------- |
|
|
| 1 | 5V | 5.0V |
|
|
| 2 | RX | 3.3V |
|
|
| 3 | TX | 3.3V |
|
|
| 4 | SCL | 3.3V |
|
|
| 5 | SDA | 3.3V |
|
|
| 6 | GND | GND |
|
|
|
|
## See Also
|
|
|
|
- [ARK DAN GPS Documentation](https://arkelectron.gitbook.io/ark-documentation/gps/ark-dan-gps) (ARK Docs)
|