mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
76 lines
2.8 KiB
Markdown
76 lines
2.8 KiB
Markdown
# Pixfalcon 비행 콘트롤러 (단종됨)
|
|
|
|
<Badge type="info" text="Discontinued" px4_current="v1.15" year="2024"/>
|
|
|
|
:::warning
|
|
This flight controller has been [discontinued](../flight_controller/autopilot_experimental.md) and is no longer commercially available.
|
|
:::
|
|
|
|
:::warning
|
|
PX4 does not manufacture this (or any) autopilot.
|
|
Contact the [manufacturer](https://holybro.com/) for hardware support or compliance issues.
|
|
:::
|
|
|
|
The Pixfalcon autopilot (designed by [Holybro<sup>®</sup>](https://holybro.com/)) is binary-compatible (FMUv2) derivative of the [Pixhawk 1](../flight_controller/pixhawk.md) design that has been optimized for space-constrained applications such as FPV racers. It has less IO to allow for the reduction in size.
|
|
|
|
|
|
|
|
## 요약
|
|
|
|
- Main System-on-Chip: [STM32F427](https://www.st.com/en/microcontrollers-microprocessors/stm32f427-437.html)
|
|
- CPU : 단정밀도 FPU의 180MHz ARM<sup>®</sup> Cortexex<sup>®</sup> M4
|
|
- RAM : 256KB SRAM (L1)
|
|
- 페일세이프 시스템 온칩 : STM32F100
|
|
- CPU: 24 MHz ARM Cortex M3
|
|
- RAM : 8KB SRAM
|
|
- GPS: u-blox<sup>®</sup> M8 (번들)
|
|
|
|
### 연결성
|
|
|
|
- I2C 1개
|
|
- UART 2개(하나는 원격 측정/OSD 용, 흐름 제어 없음)
|
|
- 수동 오버라이드 기능이 있는 PWM 8개
|
|
- S.BUS / PPM 입력
|
|
|
|
## 구매처:
|
|
|
|
No longer available.
|
|
|
|
Optional hardware:
|
|
|
|
- Optical flow: PX4 Flow unit from manufacturer [Holybro](https://holybro.com/products/px4flow)
|
|
- Digital Airspeed sensor from manufacturer [Holybro](https://holybro.com/products/digital-air-speed-sensor-ms4525do)
|
|
- 텔레메트리가 통합 화면 디스플레이
|
|
- Micro HKPilot Telemetry Radio Module with On Screen Display (OSD) unit - 433MHz. (Discontinued)
|
|
- 순수 텔레메트리 옵션:
|
|
- [SIK Radios](../telemetry/sik_radio.md)
|
|
|
|
## 펌웨어 빌드
|
|
|
|
:::tip
|
|
Most users will not need to build this firmware!
|
|
It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
|
|
:::
|
|
|
|
To [build PX4](../dev_setup/building_px4.md) for this target:
|
|
|
|
```
|
|
make px4_fmu-v2_default
|
|
```
|
|
|
|
## 디버그 포트
|
|
|
|
This board does not have a debug port (i.e it does not have a port for accessing the [System Console](../debug/system_console.md) or the [SWD interface](../debug/swd_debug.md) (JTAG).
|
|
|
|
개발자는 SWD용 보드 테스트 패드와 STM32F4 (IC) TX와 RX에 와이어를 납땜하여 콘솔을 획득할 수 있습니다.
|
|
|
|
## 시리얼 포트 매핑
|
|
|
|
| UART | 장치 | 포트 |
|
|
| ------ | ---------- | --------------------------------- |
|
|
| UART1 | /dev/ttyS0 | IO 디버그 |
|
|
| USART2 | /dev/ttyS1 | TELEM1 (흐름 제어) |
|
|
| UART4 | /dev/ttyS2 | GPS |
|
|
|
|
<!-- Note: Got ports using https://github.com/PX4/PX4-user_guide/pull/672#issuecomment-598198434 -->
|