mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
89 lines
2.3 KiB
Markdown
89 lines
2.3 KiB
Markdown
# ARK FPV Flight Controller
|
|
|
|
:::warning
|
|
PX4 does not manufacture this (or any) autopilot.
|
|
Contact the [manufacturer](https://arkelectron.com/contact-us/) for hardware support or compliance issues.
|
|
:::
|
|
|
|
The USA-built ARK FPV flight controller is based on the [ARKV6X](https://arkelectron.com/product/arkv6x/) in a 30.5mm standard mounting pattern, supporting a 3-12s battery input with a regulated 12V 2A output for video transmitters and payloads.
|
|
|
|
|
|
|
|
:::info
|
|
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
|
|
:::
|
|
|
|
## Where To Buy
|
|
|
|
Order from [Ark Electronics](https://arkelectron.com/product/arkv6x/) (US)
|
|
|
|
## 문서
|
|
|
|
See the documentation [Ark Electronics GitBook](https://arkelectron.gitbook.io/ark-documentation/flight-controllers/ark-fpv)
|
|
|
|
## 센서
|
|
|
|
- [Invensense IIM-42653 Industrial IMU](https://invensense.tdk.com/products/smartindustrial/iim-42653/)
|
|
- [Bosch BMP390 Barometer](https://www.bosch-sensortec.com/products/environmental-sensors/pressure-sensors/bmp390/)
|
|
- [ST IIS2MDC Magnetometer](https://www.st.com/en/mems-and-sensors/iis2mdc.html)
|
|
|
|
## Microprocessor
|
|
|
|
- [STM32H743IIK6 MCU](https://www.st.com/en/microcontrollers-microprocessors/stm32h743ii.html)
|
|
- 480 MHz
|
|
- 2 MB Flash
|
|
- 1 MB RAM
|
|
|
|
## 커넥터
|
|
|
|
- USB C
|
|
- VBUS In, USB
|
|
- PWM
|
|
- VBAT In, Analog Current Input, Telem RX, 4x PWM
|
|
- JST-GH 8 Pin
|
|
- PWM EXTRA
|
|
- 5x PWM
|
|
- JST-SH 6 Pin
|
|
- RC INPUT
|
|
- 5V Out, UART
|
|
- JST-GH 4 Pin
|
|
- POWER AUX
|
|
- 12V Out, VBAT In/Out
|
|
- JST-GH 3 Pin
|
|
- TELEM
|
|
- 5V Out, UART with flow control
|
|
- JST-GH 6 Pin
|
|
- GPS
|
|
- 5V Out, UART, I2C
|
|
- JST-GH 6 Pin
|
|
- CAN
|
|
- 5V Out, CAN
|
|
- JST-GH 4 Pin
|
|
- VTX
|
|
- 12V Out, UART TX/RX, UART RX
|
|
- JST-GH 6 Pin
|
|
- SPI (OSD or External IMU)
|
|
- 5V Out, SPI
|
|
- JST-SH 8 Pin
|
|
- DEBUG
|
|
- 3.3V Out, UART, SWD
|
|
- JST-SH 6 Pin
|
|
|
|
## Power Requirements
|
|
|
|
- 5.5V - 54V
|
|
- 500 mA (300 mA main system, 200 mA heater)
|
|
|
|
## 추가 정보
|
|
|
|
- Weight: 7.5 g g with MicroSD card
|
|
- Dimensions: 3.6 x 3.6 x 0.8 cm
|
|
- USA Built - NDAA compliant
|
|
- Heater: 1W for warming sensors in extreme cold
|
|
- LED Indicators
|
|
- MicroSD Slot
|
|
|
|
## 핀배열
|
|
|
|
See the [DS-10 Pixhawk Autopilot Bus Standard](https://arkelectron.gitbook.io/ark-documentation/flight-controllers/ark-fpv/pinout)
|