Andrew Tridgell 2de588e861 lsm303d: changed tones for accel fail to 3 tones ...

distinct tones for init fail, post-boot fail and recovery

2013-12-10 12:00:55 +01:00

..

airspeed

fix MEAS airspeed and airspeed calibration

2013-11-10 19:25:38 +01:00

ardrone_interface

Merge pull request #304 from julianoes/ardrone_fixes

2013-09-03 05:58:56 -07:00

blinkm

Made low/critical warnings consisting

2013-08-29 16:41:59 +02:00

bma180

drivers: report error_count in drivers where possible

2013-09-12 09:26:49 +02:00

boards

FMUv2: don't config ADC pins that are now used for MPU6k CS and other uses

2013-12-10 12:00:36 +01:00

device

SPI: added set_frequency() API

2013-12-10 11:58:15 +01:00

ets_airspeed

fix MEAS airspeed and airspeed calibration

2013-11-10 19:25:38 +01:00

gps

Hotfix: Silence GPS driver if no GPS is connected

2013-09-22 12:04:30 +02:00

hil

Use unsigned for channel counts

2013-10-11 10:16:45 +02:00

hmc5883

Merged status changes

2013-10-06 14:17:37 +02:00

hott

Moved math library to library dir, improved sensor-level HIL, cleaned up geo / conversion libs

2013-08-21 18:13:01 +02:00

l3gd20

l3gd20: added I2C disable based on method from ST engineering support

2013-12-10 11:59:54 +01:00

led

Added LED_TOGGLE for normal LEDs

2013-08-15 17:34:49 +02:00

lsm303d

lsm303d: changed tones for accel fail to 3 tones

2013-12-10 12:00:55 +01:00

mb12xx

drivers: report error_count in drivers where possible

2013-09-12 09:26:49 +02:00

md25

Segway stabilized.

2013-07-28 22:27:05 -04:00

meas_airspeed

fix MEAS airspeed and airspeed calibration

2013-11-10 19:25:38 +01:00

mkblctrl

pwm info provides more information, some fixes for setting rate/min/max/disarmed

2013-10-07 16:24:49 +02:00

mpu6000

mpu6000: change bus speed based on registers being accessed

2013-12-10 11:58:21 +01:00

ms5611

Merged status changes

2013-10-06 14:17:37 +02:00

px4fmu

pwm_output: Allow PWM values from 900us to 2100us but use a default of 1000us to 2000us

2013-10-31 10:29:06 +01:00

px4io

px4io driver: bug fixed

2013-11-16 15:54:24 +01:00

rgbled

rgbled: don't try the same bus twice

2013-10-19 11:42:46 +02:00

roboclaw

Changed driver to control motor duty cycle.

2013-10-22 05:43:27 -04:00

stm32

tone_alarm: add GPS warning tone

2013-09-27 13:34:25 +02:00

drv_accel.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_adc.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_airspeed.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_baro.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_blinkm.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_gpio.h

Restructure things so that the PX4 configs move out of the NuttX tree, and most of the PX4-specific board configuration data moves out of the config and into the board driver.

2013-08-02 22:34:55 -07:00

drv_gps.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_gyro.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_hrt.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_led.h

Added LED_TOGGLE for normal LEDs

2013-08-15 17:34:49 +02:00

drv_mag.h

added error_count field to sensor report structures

2013-09-12 09:25:01 +02:00

drv_mixer.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_orb_dev.h

Moved last libs, drivers and headers, cleaned up IO build

2013-04-28 09:54:11 +02:00

drv_pwm_output.h

pwm_output: Allow PWM values from 900us to 2100us but use a default of 1000us to 2000us

2013-10-31 10:29:06 +01:00

drv_range_finder.h

added error_count field to sensor report structures

2013-09-12 09:25:01 +02:00

drv_rc_input.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_rgbled.h

Changed RGBLED behaviour, breathe mode when disarmed and ready to arm

2013-08-29 16:45:33 +02:00

drv_sensor.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00

drv_tone_alarm.h

Cleanup of Doxygen tags

2013-10-28 15:21:50 +01:00