mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
89 lines
3.3 KiB
Markdown
89 lines
3.3 KiB
Markdown
# CUAV Pixhack V3 (Discontinued)
|
||
|
||
<Badge type="info" text="Discontinued" />
|
||
|
||
:::warning
|
||
This flight controller has been [discontinued](../flight_controller/autopilot_experimental.md) and is no longer commercially available.
|
||
:::
|
||
|
||
:::warning
|
||
PX4 не розробляє цей (або будь-який інший) автопілот.
|
||
Contact the [manufacturer](https://store.cuav.net/) for hardware support or compliance issues.
|
||
:::
|
||
|
||
The CUAV _Pixhack V3_ flight controller board is a flexible autopilot intended primarily for manufacturers of commercial systems.
|
||
|
||
The board is a variant of the SOLO Pixhawk<sup>®</sup> 2 (PH2) flight controller, which is in turn based on the [Pixhawk-project](https://pixhawk.org/) **FMUv3** open hardware design.
|
||
It runs PX4 on the [NuttX](https://nuttx.apache.org/) OS, and is fully compatible with both PX4 or ArduPilot<sup>®</sup> (APM) firmware.
|
||
|
||
_Pixhack V3_ has significant improvements with respect to the original design, including better interface layout and the addition of vibration damping and a thermostat system.
|
||
|
||
|
||
|
||
:::info
|
||
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
|
||
:::
|
||
|
||
## Короткий опис
|
||
|
||
- Мікропроцесор:
|
||
- STM32F427
|
||
- STM32F100 (відмовостійкий співпроцесор)
|
||
- Датчики:
|
||
- Акселерометри (3): LS303D, MPU6000, MPU9250/hmc5983
|
||
- Гіроскопи (3): L3GD20, MPU6000, MPU9250
|
||
- Компаси (2): LS303D, MPU9250
|
||
- Барометри (2): MS5611 X2
|
||
- Інтерфейси:
|
||
- MAVLink UART (2)
|
||
- GPS UART (2)
|
||
- DEBUG UART (1)
|
||
- RC IN (для PPM, SBUS, DSM/DSM2)
|
||
- RSSI IN: PWM OR 3.3ADC
|
||
- I2C (2)
|
||
- CAN BUS (1)
|
||
- ADC IN: 3.3В X1 , 6.6В X1
|
||
- PWM OUT: 8 PWM IO + 4 IO
|
||
- Система живлення:
|
||
- PM POWER IN: 4.5 ~ 5.5 В
|
||
- USB POWER IN: 5.0 В +- 0.25В
|
||
- Вага та розміри:
|
||
- Вага: 63г
|
||
- Ширина: 68мм
|
||
- Товщина: 17мм
|
||
- Довжина: 44мм
|
||
- Інші характеристики:
|
||
- Температура роботи: -20 ~ 60°C
|
||
|
||
## Доступність
|
||
|
||
Плату можна придбати з:
|
||
|
||
- [leixun.aliexpress.com/store](https://leixun.aliexpress.com/store)
|
||
|
||
## Збірка прошивки
|
||
|
||
:::tip
|
||
Most users will not need to build this firmware!
|
||
It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
|
||
:::
|
||
|
||
To [build PX4](../dev_setup/building_px4.md) for this target:
|
||
|
||
```sh
|
||
make px4_fmu-v3_default
|
||
```
|
||
|
||
<!-- Pinouts and Schematics: section removed as guides no longer published -->
|
||
|
||
## Налаштування послідовного порту
|
||
|
||
| UART | Пристрій | Порт |
|
||
| ------ | ---------- | --------------------------------------------- |
|
||
| UART1 | /dev/ttyS0 | IO debug |
|
||
| USART2 | /dev/ttyS1 | TELEM1 (керування потоком) |
|
||
| USART3 | /dev/ttyS2 | TELEM2 (керування потоком) |
|
||
| UART4 | | |
|
||
| UART7 | | CONSOLE |
|
||
| UART8 | | SERIAL4 |
|