Files
PX4-Autopilot/docs/uk/test_cards/mc_07_vio.md
2025-09-11 08:30:05 +10:00

53 lines
2.0 KiB
Markdown

# Test MC_07 - VIO (Visual-Inertial Odometry)
## Objective
To test that external vision (VIO) works as expected
## Preflight
Disconnect all GPS / compasses and ensure vehicle is using VIO for navigation
Ensure that the drone can go into Altitude / Position flight mode while still on the ground
Ensure there are no other sources of positioning besides VIO:
- [EKF2_OF_CTRL](../advanced_config/parameter_reference.md#EKF2_OF_CTRL): `0`
- [EKF2_GPS_CTRL](../advanced_config/parameter_reference.md#EKF2_GPS_CTRL): `0`
- [EKF2_EV_CTRL](../advanced_config/parameter_reference.md#EKF2_EV_CTRL): `15`
- [SYS_HAS_MAG](../advanced_config/parameter_reference.md#SYS_HAS_MAG): `0`
## Flight Tests
❏ Altitude flight mode
    ❏ Vertical position should hold current value with stick centered
    ❏ Pitch/Roll/Yaw response 1:1
    ❏ Throttle response set to climb/descent rate
❏ Position flight mode
    ❏ Horizontal position should hold current value with stick centered
    ❏ Vertical position should hold current value with stick centered
    ❏ Throttle response set to climb/descent rate
    ❏ Pitch/Roll/Yaw response set to pitch/roll/yaw rates
## Посадка
❏ Land in either Position or Altitude mode with the throttle below 40%
❏ Upon touching ground, copter should disarm automatically within 2 seconds (default: see [COM_DISARM_LAND](../advanced_config/parameter_reference.md#COM_DISARM_LAND))
## Очікувані результати
- Зліт повинен бути плавним, коли газ піднято
- Drone should hold altitude in Altitude Flight mode without wandering
- Drone should hold position within 1 meter in Position Flight mode without pilot moving sticks
- Немає коливання в жодному з перерахованих режимів польоту
- Після посадки, коптер не повинен підскакувати на землі