mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
51 lines
1.9 KiB
Markdown
51 lines
1.9 KiB
Markdown
# 항속센서 보정
|
|
|
|
:::info
|
|
[Airspeed sensors](../sensor/airspeed.md) are highly recommended for Fixed-wing and VTOL vehicles.
|
|
:::
|
|
|
|
:::warning
|
|
Unlike most other sensor drivers, the airspeed sensor drivers are not automatically started.
|
|
Before calibration they must be [enabled via the corresponding parameter](../advanced_config/parameters.md):
|
|
|
|
- Sensirion SDP3X ([SENS_EN_SDP3X](../advanced_config/parameter_reference.md#SENS_EN_SDP3X))
|
|
- TE MS4525 ([SENS_EN_MS4525DO](../advanced_config/parameter_reference.md#SENS_EN_MS4525DO))
|
|
- TE MS5525 ([SENS_EN_MS5525DS](../advanced_config/parameter_reference.md#SENS_EN_MS5525DS))
|
|
- Eagle Tree airspeed sensor ([SENS_EN_ETSASPD](../advanced_config/parameter_reference.md#SENS_EN_ETSASPD))
|
|
|
|
:::
|
|
|
|
## 보정 절차
|
|
|
|
항속 센서 보정 절차
|
|
|
|
1. Start _QGroundControl_ and connect the vehicle.
|
|
|
|
2. Enable the airspeed sensors if not already done (as in _warning_ above).
|
|
|
|
3. Select **"Q" icon > Vehicle Setup > Sensors** (sidebar) to open _Sensor Setup_.
|
|
|
|
4. Click the **Airspeed** sensor button.
|
|
|
|
|
|
|
|
5. 센서로 부는 바람을 막으십시오 (예: 손을 컵 모양으로 감쌀 수 있습니다).
|
|
피톳 튜브의 구멍을 막지 않도록 주의하십시오.
|
|
|
|
6. Click **OK** to start the calibration.
|
|
|
|
7. 피톳 튜브의 끝에 입으로 바람을 불어 보정 완료 신호를 보냅니다.
|
|
|
|
:::tip
|
|
Blowing into the tube is also a basic check that the dynamic and static ports are installed correctly.
|
|
교체한 센서는 튜브에 바람을 불어 넣을 때 큰 음의 차압을 판독하고 보정이 오류와 함께 중단됩니다.
|
|
|
|
:::
|
|
|
|
8. _QGroundControl_ then tells you if the calibration was successful or not.
|
|
|
|
## 추가 정보
|
|
|
|
- [Airspeed Validation](../advanced_config/airspeed_validation.md).
|
|
- [QGroundControl User Guide > Sensors](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/setup_view/sensors_px4.html#airspeed)
|