mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-05-02 05:04:08 +08:00
88 lines
1.6 KiB
Markdown
88 lines
1.6 KiB
Markdown
# Modules Reference: Ins (Driver)
|
|
|
|
## ilabs
|
|
|
|
Source: [drivers/ins/ilabs](https://github.com/PX4/PX4-Autopilot/tree/main/src/drivers/ins/ilabs)
|
|
|
|
### 설명
|
|
|
|
Serial bus driver for the ILabs sensors.
|
|
|
|
Most boards are configured to enable/start the driver on a specified UART using the SENS_ILABS_CFG.
|
|
After that you can use the ILABS_MODE parameter to config outputs:
|
|
|
|
- Only raw sensor output (the default).
|
|
- Sensor output and INS data such as position and velocity estimates.
|
|
|
|
Setup/usage information: https://docs.px4.io/main/en/sensor/ilabs.html
|
|
|
|
### 예
|
|
|
|
Attempt to start driver on a specified serial device.
|
|
|
|
```
|
|
ilabs start -d /dev/ttyS1
|
|
```
|
|
|
|
Stop driver
|
|
|
|
```
|
|
ilabs stop
|
|
```
|
|
|
|
### Usage {#ilabs_usage}
|
|
|
|
```
|
|
ilabs <command> [arguments...]
|
|
Commands:
|
|
start Start driver
|
|
-d <val> Serial device
|
|
|
|
status Driver status
|
|
|
|
stop Stop driver
|
|
|
|
status Print driver status
|
|
```
|
|
|
|
## vectornav
|
|
|
|
Source: [drivers/ins/vectornav](https://github.com/PX4/PX4-Autopilot/tree/main/src/drivers/ins/vectornav)
|
|
|
|
### 설명
|
|
|
|
Serial bus driver for the VectorNav VN-100, VN-200, VN-300.
|
|
|
|
Most boards are configured to enable/start the driver on a specified UART using the SENS_VN_CFG parameter.
|
|
|
|
Setup/usage information: https://docs.px4.io/main/en/sensor/vectornav.html
|
|
|
|
### 예
|
|
|
|
Attempt to start driver on a specified serial device.
|
|
|
|
```
|
|
vectornav start -d /dev/ttyS1
|
|
```
|
|
|
|
Stop driver
|
|
|
|
```
|
|
vectornav stop
|
|
```
|
|
|
|
### Usage {#vectornav_usage}
|
|
|
|
```
|
|
vectornav <command> [arguments...]
|
|
Commands:
|
|
start Start driver
|
|
-d <val> Serial device
|
|
|
|
status Driver status
|
|
|
|
stop Stop driver
|
|
|
|
status Print driver status
|
|
```
|