mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
109 lines
4.0 KiB
Markdown
109 lines
4.0 KiB
Markdown
# mRo Pixhawk Flight Controller (Pixhawk 1)
|
|
|
|
:::warning
|
|
PX4 does not manufacture this (or any) autopilot.
|
|
Contact the [manufacturer](https://store.mrobotics.io/) for hardware support or compliance issues.
|
|
:::
|
|
|
|
The _mRo Pixhawk<sup>®</sup>_ is a hardware compatible version of the original [Pixhawk 1](../flight_controller/pixhawk.md). It runs PX4 on the [NuttX](https://nuttx.apache.org/) OS.
|
|
|
|
:::tip
|
|
The controller can be used as a drop-in replacement for the 3DR<sup>®</sup> [Pixhawk 1](../flight_controller/pixhawk.md).
|
|
The main difference is that it is based on the [Pixhawk-project](https://pixhawk.org/) **FMUv3** open hardware design, which corrects a bug that limited the original Pixhawk 1 to 1MB of flash.
|
|
:::
|
|
|
|
|
|
|
|
Assembly/setup instructions for use with PX4 are provided here: [Pixhawk Wiring Quickstart](../assembly/quick_start_pixhawk.md)
|
|
|
|
:::tip
|
|
This autopilot is [supported](../flight_controller/autopilot_pixhawk_standard.md) by the PX4 maintenance and test teams.
|
|
:::
|
|
|
|
## 主要特性
|
|
|
|
- 微处理器：
|
|
- 32-bit STM32F427 Cortex<sup>®</sup> M4 core with FPU
|
|
- 168 MHz/256 KB RAM/2 MB Flash
|
|
- 32 bit STM32F100 failsafe co-processor
|
|
- 24 MHz/8 KB RAM/64 KB Flash
|
|
|
|
- 传感器：
|
|
- ST Micro L3GD20 3-axis 16-bit gyroscope
|
|
- ST Micro LSM303D 3-axis 14-bit accelerometer / magnetometer
|
|
- Invensense<sup>®</sup> MPU 6000 3-axis accelerometer/gyroscope
|
|
- MEAS MS5611 气压计
|
|
|
|
- 接口：
|
|
- 5x UART (serial ports), one high-power capable, 2x with HW flow control
|
|
- 2x CAN
|
|
- Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)
|
|
- Futaba<sup>®</sup> S.BUS compatible input and output
|
|
- PPM sum signal
|
|
- RSSI (PWM or voltage) input
|
|
- I2C
|
|
- SPI
|
|
- 3.3 and 6.6V ADC inputs
|
|
- External microUSB port
|
|
|
|
- 电源系统
|
|
- Ideal diode controller with automatic failover
|
|
- Servo rail high-power (7 V) and high-current ready
|
|
- All peripheral outputs over-current protected, all inputs ESD protected
|
|
|
|
- 重量和尺寸:
|
|
- Weight: 38g (1.31oz)
|
|
- Width: 50mm (1.96")
|
|
- Thickness: 15.5mm (.613")
|
|
- Length: 81.5mm (3.21")
|
|
|
|
## 访问链接
|
|
|
|
- [Bare Bones](https://store.mrobotics.io/Genuine-PixHawk-1-Barebones-p/mro-pixhawk1-bb-mr.htm) - Just the board (useful as a 3DR Pixhawk replacement)
|
|
- [mRo Pixhawk 2.4.6 Essential Kit!](https://store.mrobotics.io/Genuine-PixHawk-Flight-Controller-p/mro-pixhawk1-minkit-mr.htm) - Everything except for telemetry radios
|
|
- [mRo Pixhawk 2.4.6 Cool Kit! (Limited edition)](https://store.mrobotics.io/product-p/mro-pixhawk1-fullkit-mr.htm) - Everything you need including telemetry radios
|
|
|
|
## 编译固件
|
|
|
|
:::tip
|
|
Most users will not need to build this firmware!
|
|
It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
|
|
:::
|
|
|
|
To [build PX4](../dev_setup/building_px4.md) for this target:
|
|
|
|
```
|
|
make px4_fmu-v3_default
|
|
```
|
|
|
|
## Debug Ports
|
|
|
|
See [3DR Pixhawk 1 > Debug Ports](../flight_controller/pixhawk.md#debug-ports)
|
|
|
|
## 针脚定义
|
|
|
|
See [3DR Pixhawk 1 > Pinouts](../flight_controller/pixhawk.md#pinouts)
|
|
|
|
## 串口映射
|
|
|
|
| UART | 设备 | Port |
|
|
| ------ | ---------- | ------------------------------ |
|
|
| UART | UART | IO debug |
|
|
| USART2 | /dev/ttyS1 | TELEM1 (流控) |
|
|
| USART3 | /dev/ttyS2 | TELEM2 (流控) |
|
|
| UART4 | | |
|
|
| UART7 | CONSOLE | |
|
|
| UART8 | SERIAL4 | |
|
|
|
|
<!-- Note: Got ports using https://github.com/PX4/PX4-user_guide/pull/672#issuecomment-598198434 -->
|
|
|
|
## 原理图
|
|
|
|
The board is based on the [Pixhawk-project](https://pixhawk.org/) **FMUv3** open hardware design.
|
|
|
|
- [FMUv3 schematic](https://github.com/pixhawk/Hardware/raw/master/FMUv3_REV_D/Schematic%20Print/Schematic%20Prints.PDF) -- Schematic and layout
|
|
|
|
:::info
|
|
As a CC-BY-SA 3.0 licensed Open Hardware design, all schematics and design files are [available](https://github.com/pixhawk/Hardware).
|
|
:::
|