PX4-Autopilot/docs/ko/telemetry/tfsik_telemetry.md
PX4 Build Bot 84cdc05195
New Crowdin translations - ko (#25200)
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
2025-07-13 10:37:31 +10:00

63 lines
2.6 KiB
Markdown
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# TFSIK01 Telemetry Modem
The [TFSIK01](https://docs.thunderfly.cz/avionics/TFSIK01/) is a high-performance open-source telemetry modem developed by [ThunderFly](https://www.thunderfly.cz/).
It is designed to provide robust wireless communication between UAVs and ground stations.
Featuring dual antenna diversity, strong interference immunity, and compatibility with MAVLink framing, it is an ideal choice for demanding UAV and robotics applications.
![TFSIK01 pair with USB-C converter](../../assets/hardware/telemetry/thunderly_tfsik01_pair.jpg)
The modem is plug-and-play with flight controllers using a JST-GH UART interface and is available pre-configured for the 433, 868, and 915 MHz bands, (other non-standard frequencies available on request).
## 구매처
- [TFSIK01A on Tindie](https://www.tindie.com/products/thunderfly/tfsik01-high-performance-uav-telemetry-modem/)
- Directly from [ThunderFly](https://www.thunderfly.cz/contact-us.html) ([sale@thunderfly.cz](mailto:sale@thunderfly.cz))
## 특징
- Open-source SiK firmware
- Dual antenna diversity with automatic switching
- Robust against interference and out-of-band signal jamming
- Frequency-Hopping Spread Spectrum (FHSS)
- Adaptive TDM, LBT, and AFA support
- MAVLink protocol support
- Up to 250kbps air data rate
- Several kilometres of range
- Plug-n-play with Pixhawk-compatible flight controllers
## 사양
- Frequency: 433MHz (default), 868MHz, 915 MHz, or custom
- Power: up to 500mW (27 dBm), adjustable (100mW default)
- Interface: JST-GH 6-pin UART (3.3V)
- Connectors: Dual MCX — snap-on connectors that reduce the risk of damage in case of crash impacts
- Weight: 18g
## LEDs Indicators Status
- **Green blinking** searching for link
- **Green solid** link established
- **Red flashing** data transmission
- **Red solid** firmware update mode
- **Orange** indicates selected antenna for RX/TX
## Connecting to Flight Controller
Connect to the `TELEM1` port of your flight controller using the included JST-GH cable.
Configuration may be required for alternative UART ports.
## Connecting to PC or Ground Station
Use the [TFUSBSERIAL01](https://docs.thunderfly.cz/avionics/TFUSBSERIAL01/) USB-C to UART adapter to connect the modem to your PC, tablet, or Raspberry Pi.
## Package Includes
- 2× TFSIK01 Modems (with housing)
- 2× JST-GH serial cables
- 1× TFUSBSERIAL01 USB-C to UART converter
- 2× MCX Antenna kit (optional)
## 추가 정보
For detailed specifications, configuration options, firmware updates, and advanced usage, visit the full [TFSIK01 documentation](https://docs.thunderfly.cz/avionics/TFSIK01/)