mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
88d623bedb
* Add vitepress tree * Update existing workflows so they dont trigger on changes in the docs path * Add nojekyll, package.json, LICENCE etc * Add crowdin docs upload/download scripts * Add docs flaw checker workflows * Used docs prefix for docs workflows * Crowdin obvious fixes * ci: docs move to self hosted runner runs on a beefy server for faster builds Signed-off-by: Ramon Roche <mrpollo@gmail.com> * ci: don't run build action for docs or ci changes Signed-off-by: Ramon Roche <mrpollo@gmail.com> * ci: update runners Signed-off-by: Ramon Roche <mrpollo@gmail.com> * Add docs/en * Add docs assets and scripts * Fix up editlinks to point to PX4 sources * Download just the translations that are supported * Add translation sources for zh, uk, ko * Update latest tranlsation and uorb graphs * update vitepress to latest --------- Signed-off-by: Ramon Roche <mrpollo@gmail.com> Co-authored-by: Ramon Roche <mrpollo@gmail.com>
39 lines
2.1 KiB
Markdown
39 lines
2.1 KiB
Markdown
# Ainstein US-D1 Standard Radar Altimeter
|
|
|
|
:::tip
|
|
This supersedes the _Aerotenna uLanding Radar_ (discontinued) but uses the same driver/setup.
|
|
:::
|
|
|
|
The _Ainstein_ [US-D1 Standard Radar Altimeter](https://ainstein.ai/us-d1-all-weather-radar-altimeter/) is a compact microwave rangefinder that has been optimised for use on UAVs.
|
|
With a sensing range of about 50 metres, it is useful for applications including terrain following, precision hovering (e.g. for photography), anti-collision sensing etc.
|
|
이 제품의 특별한 장점은 모든 기상 조건과 모든 지형 유형(물 포함)에서 잘 작동한다는 점입니다.
|
|
The user manual can be found [here](https://ainstein.ai/wp-content/uploads/US-D1-Technical-User-Manual-D00.02.05.docx.pdf).
|
|
|
|
|
|
|
|
The rangefinder is not automatically included in most firmware, and hence cannot be used just by setting a parameter through _QGroundControl_ (as is possible with some other rangefinders).
|
|
이를 사용하려면 펌웨어에 드라이버를 추가하고, 부팅시 드라이버를 시작하도록 설정 파일을 업데이트하여야합니다.
|
|
아래 섹션에서는 방법을 설명합니다.
|
|
|
|
## 하드웨어 설정
|
|
|
|
거리계는 NuttX 또는 Posix OS에서 직렬 포트를 제공하는 하드웨어에서 지원됩니다.
|
|
Minimally this will include most, if not all, [Pixhawk Series](../flight_controller/pixhawk_series.md) controllers.
|
|
|
|
US-D1 can be connected to any unused _serial port_ (UART), e.g.: TELEM2, TELEM3, GPS2 etc.
|
|
|
|
## 매개변수 설정
|
|
|
|
[Configure the serial port](../peripherals/serial_configuration.md) on which the lidar will run using [SENS_ULAND_CFG](../advanced_config/parameter_reference.md#SENS_ULAND_CFG).
|
|
포트 전송속도는 드라이버에 의해 설정되므로, 추가로 설정하지 않아도 됩니다.
|
|
|
|
::: info
|
|
|
|
If the configuration parameter is not available in _QGroundControl_ then you may need to [add the driver to the firmware](../peripherals/serial_configuration.md#parameter_not_in_firmware):
|
|
|
|
```plain
|
|
CONFIG_DRIVERS_DISTANCE_SENSOR_ULANDING_RADAR=y
|
|
```
|
|
|
|
:::
|