docs: update release notes from list of prs

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
docs: release notes for v1.16
2026-05-31 14:00:05 +08:00 · 2025-05-19 10:34:02 -07:00 · 2025-05-19 08:20:07 -07:00
776 changed files with 15143 additions and 24789 deletions
@@ -54,13 +54,7 @@ jobs:
        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"

      - id: set-branch
-        run: |
-          echo "branchname=${{
-            github.event_name == 'pull_request' &&
-            format('pr-{0}', github.event.pull_request.number) ||
-            github.head_ref ||
-            github.ref_name
-          }}" >> $GITHUB_OUTPUT
+        run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"

      - name: Debug Matrix Output
        if: runner.debug == '1'
@@ -7,34 +7,33 @@ See [the documentation on Maintainers](https://docs.px4.io/main/en/contribute/ma

 | Name                    | Sector | GitHub | Chat | email
 |-------------------------|--------|--------|------|----------------
-| Lorenz Meier | Founder | [@LorenzMeier](https://github.com/LorenzMeier) |  | <lorenz@px4.io>
-| Daniel Agar | Architecture | [@dagar](https://github.com/dagar) | daniel_agar | <daniel@agar.ca>
-| Beat Küng | Architecture | [@bkueng](https://github.com/bkueng) | beatkueng | <beat-kueng@gmx.net>
-| Ramón Roche | CI / Testing | [@mrpollo](https://github.com/mrpollo) | rroche | <rroche@linuxfoundation.org>
-| Mathieu Bresciani | State Estimation | [@bresch](https://github.com/bresch) | mbresch |
-| Paul Riseborough | State Estimation | [@priseborough](https://github.com/priseborough) |  |
-| David Sidrane | RTOS / NuttX | [@davids5](https://github.com/davids5) | david_s5 | <David.Sidrane@Nscdg.com>
-| Jayoung Lim | Simulation | [@Jaeyoung-Lim](https://github.com/Jaeyoung-Lim) | jaeyounglim. | <jalim@ethz.ch>
-| Beniamino Pozzan | ROS 2 | [@beniaminopozzan](https://github.com/beniaminopozzan) | beniaminopozzan | <beniamino.pozzan@gmail.com>
-| Matthias Grob | Multirotor | [@MaEtUgR](https://github.com/MaEtUgR) | maetugr |
-| Silvan Fuhrer | Fixed-Wing / VTOL | [@sfuhrer](https://github.com/sfuhrer) | sfuhrer |
-| Christian Friedrich | Rover | [@chfriedrich98](https://github.com/chfriedrich98) | christian982564 |
-| Pedro Roque | Spacecraft | [@Pedro-Roque](https://github.com/Pedro-Roque) | .pedroroque | <padr@kth.se>
-| Jacob Dahl | Simulation | [@dakejahl](https://github.com/dakejahl) | dakejahl | <dahl.jakejacob@gmail.com>
+| Lorenz Meier | Founder | [LorenzMeier][LorenzMeier] |  | <lorenz@px4.io>
+| Daniel Agar | Architecture | [dagar][dagar] | daniel_agar | <daniel@agar.ca>
+| Beat Küng | Architecture | [bkueng][bkueng] | beatkueng | <beat-kueng@gmx.net>
+| Ramón Roche | CI / Testing | [mrpollo][mrpollo] | rroche | <rroche@linuxfoundation.org>
+| Mathieu Bresciani | State Estimation | [bresch][bresch] | mbresch |
+| Paul Riseborough | State Estimation | [priseborough][priseborough] |  |
+| David Sidrane | RTOS / NuttX | [davids5][davids5] | david_s5 | <David.Sidrane@Nscdg.com>
+| Jayoung Lim | Simulation | [Jaeyoung-Lim][Jaeyoung-Lim] | jaeyounglim. | <jalim@ethz.ch>
+| Beniamino Pozzan | ROS 2 | [beniaminopozzan][beniaminopozzan] | beniaminopozzan | <beniamino.pozzan@gmail.com>
+| Matthias Grob | Multirotor | [MaEtUgR][MaEtUgR] | maetugr |
+| Silvan Fuhrer | Fixed-Wing / VTOL | [sfuhrer][sfuhrer] | sfuhrer |
+| Christian Friedrich | Rover | [chfriedrich98][chfriedrich98] | christian982564 |
+| Pedro Roque | Spacecraft | [Pedro-Roque][Pedro-Roque] | .pedroroque | <padr@kth.se>


 **Documentation Maintainers**

 | Name | GitHub | Chat | email
 |------|--------|------|----------------------
-| Hamish Willee  | [@hamishwillee](https://github.com/hamishwillee) | hamishwillee |
+| Hamish Willee  | [hamishwillee][hamishwillee] | hamishwillee |

 **Release Managers**

 | Name | GitHub | Chat | email
 |------|--------|------|----------------------
-| Ramón Roche | [@mrpollo](https://github.com/mrpollo) | rroche | <rroche@linuxfoundation.org>
-| Daniel Agar | [@dagar](https://github.com/dagar) | daniel_agar | <daniel@agar.ca>
+| Ramón Roche | [mrpollo][mrpollo] | rroche | <rroche@linuxfoundation.org>
+| Daniel Agar | [dagar][dagar] | daniel_agar | <daniel@agar.ca>

 **Retired Maintainers**

@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# @name HexarotorX SITL for SIH
-#
-# @type Hexarotor x
-# @class Copter
-#
-# @maintainer Matthias Grob <maetugr@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=hex}
-
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 1
-param set-default SENS_EN_MAGSIM 1
-
-param set SIH_VEHICLE_TYPE 4
-
-# Symmetric hexacopter X clockwise motor numbering
-param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.866
-param set-default CA_ROTOR0_PY 0.5
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY 1
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX -0.866
-param set-default CA_ROTOR2_PY 0.5
-param set-default CA_ROTOR3_PX -0.866
-param set-default CA_ROTOR3_PY -0.5
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_PX 0
-param set-default CA_ROTOR4_PY -1
-param set-default CA_ROTOR5_PX 0.866
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-
-param set-default EKF2_GPS_DELAY 0
@@ -109,7 +109,6 @@ px4_add_romfs_files(
 	10041_sihsim_airplane
 	10042_sihsim_xvert
 	10043_sihsim_standard_vtol
-	10044_sihsim_hex

 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2
@@ -110,36 +110,25 @@ if [ -n "${PX4_SIM_MODEL#*gz_}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
 	MODEL_NAME="${PX4_SIM_MODEL#*gz_}"
 	MODEL_NAME_INSTANCE="${MODEL_NAME}_${px4_instance}"

-	sdf_pose_str=""
-
+	POSE_ARG=""
 	if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
-		pose_x=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $1}')
-		pose_y=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $2}')
-		pose_z=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $3}')
-		pose_roll=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $4}')
-		pose_pitch=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $5}')
-		pose_yaw=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $6}')
+		pos_x=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $1}')
+		pos_y=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $2}')
+		pos_z=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $3}')
+		pos_x=${pos_x:-0}
+		pos_y=${pos_y:-0}
+		pos_z=${pos_z:-0}

-		pose_x=${pose_x:-0}
-		pose_y=${pose_y:-0}
-		pose_z=${pose_z:-0}
-		pose_roll=${pose_roll:-0}
-		pose_pitch=${pose_pitch:-0}
-		pose_yaw=${pose_yaw:-0}
-
-		sdf_pose_str="<pose> ${pose_x} ${pose_y} ${pose_z} ${pose_roll} ${pose_pitch} ${pose_yaw} </pose>"
-		echo "INFO  [init] Gazebo model pose: ${pose_x} ${pose_y} ${pose_z} ${pose_roll} ${pose_pitch} ${pose_yaw}"
+		POSE_ARG=", pose: { position: { x: ${pos_x}, y: ${pos_y}, z: ${pos_z} } }"
+		echo "INFO  [init] Spawning model at position: ${pos_x} ${pos_y} ${pos_z}"
 	fi

-	echo "INFO  [init] Spawning Gazebo model"
-
-	# include the actual SDF in this one, containing the pose if given
-	sdf_str="<sdf version=\"1.6\"> <include> <uri>file://${PX4_GZ_MODELS}/${MODEL_NAME}/model.sdf</uri> ${sdf_pose_str} </include> </sdf>"
+	echo "INFO  [init] Spawning model"

 	# Spawn model
 	${gz_command} service -s "/world/${PX4_GZ_WORLD}/create" --reqtype gz.msgs.EntityFactory \
 			--reptype gz.msgs.Boolean --timeout 5000 \
-			--req "name: \"${MODEL_NAME_INSTANCE}\", allow_renaming: false, sdf: '${sdf_str}'" > /dev/null 2>&1
+			--req "sdf_filename: \"${PX4_GZ_MODELS}/${MODEL_NAME}/model.sdf\", name: \"${MODEL_NAME_INSTANCE}\", allow_renaming: false${POSE_ARG}" > /dev/null 2>&1

 	# Wait for model to spawn
 	sleep 1
@@ -295,15 +295,10 @@ then
 	# for multi intances setup, add namespace prefix
 	uxrce_dds_ns="-n px4_$px4_instance"
 fi
-if [ "${PX4_UXRCE_DDS_NS+x}" ]; then
-	# Override, as variable is set (empty or not)
-	if [ -n "$PX4_UXRCE_DDS_NS" ]; then
-		# Override namespace if environment variable is non-empty
-		uxrce_dds_ns="-n $PX4_UXRCE_DDS_NS"
-	else
-		# Clear namespace if variable is empty
-		uxrce_dds_ns=""
-	fi
+if [ -n "$PX4_UXRCE_DDS_NS" ]
+then
+	# Override namespace if environment variable is defined
+	uxrce_dds_ns="-n $PX4_UXRCE_DDS_NS"
 fi
 if [ -n "$ROS_DOMAIN_ID" ]
 then
@@ -15,8 +15,7 @@ control_allocator start
 #
 fw_rate_control start
 fw_att_control start
-fw_mode_manager start
-fw_lat_lon_control start
+fw_pos_control start
 airspeed_selector start

 #
@@ -13,6 +13,8 @@ param set-default MAV_TYPE 1
 #
 # Default parameters for fixed wing UAVs.
 #
+# there is a 2.5 factor applied on the _FS thresholds if for invalidation
+param set-default COM_POS_FS_EPH 50
 param set-default COM_VEL_FS_EVH 3

 param set-default COM_POS_LOW_EPH 50
@@ -20,5 +20,7 @@ param set-default NAV_ACC_RAD 2
 param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10

+param set-default GPS_UBX_DYNMODEL 6
+
 # lower RNG_FOG since MC are expected to fly closer over obstacles
 param set-default EKF2_RNG_FOG 1.0
@@ -27,8 +27,7 @@ fi

 fw_rate_control start vtol
 fw_att_control start vtol
-fw_mode_manager start
-fw_lat_lon_control start vtol
+fw_pos_control start vtol
 fw_autotune_attitude_control start vtol

 # Start Land Detector
@@ -10,6 +10,9 @@ set VEHICLE_TYPE vtol
 # MAV_TYPE_VTOL_FIXEDROTOR 22
 param set-default MAV_TYPE 22

+# there is a 2.5 factor applied on COM_POS_FS_EPH if for invalidation
+param set-default COM_POS_FS_EPH 50
+
 param set-default COM_POS_LOW_EPH 50

 param set-default MIS_TAKEOFF_ALT 20
@@ -39,7 +39,7 @@ set VEHICLE_TYPE none
 # Airframe parameter versioning
 # Value set to 1 by default but can optionally be overridden in the airframe configuration startup script.
 # Airframe maintainers can ensure a reset to the airframe defaults during an update by increasing by one.
-# e.g. add line "set PARAM_DEFAULTS_VER 2" in your airframe file to build the first update that enforces a reset.
+# e.g. add line "set PARAM_DEFAULTS_VER 2" in your airframe file to build the first update that enfoces a reset.
 set PARAM_DEFAULTS_VER 1

 #
@@ -27,9 +27,9 @@ do
    # - An old .msg version exists
    # - A translation header exists and is included

-    # Ignore changes to comments or constants and trim whitespace
-    content_a=$(git show "${BASE_COMMIT}:${file}" | grep -o '^[^#]*' | grep -v = | sed 's/^ *//;s/[ \t]*$//')
-    content_b=$(git show "${HEAD_COMMIT}:${file}" | grep -o '^[^#]*' | grep -v = | sed 's/^ *//;s/[ \t]*$//')
+    # Ignore changes to comments or constants
+    content_a=$(git show "${BASE_COMMIT}:${file}" | grep -o '^[^#]*' | grep -v =)
+    content_b=$(git show "${HEAD_COMMIT}:${file}" | grep -o '^[^#]*' | grep -v =)
    if [ "${content_a}" == "${content_b}" ]; then
      echo "No version update required for ${file}"
      continue
@@ -2,7 +2,19 @@

 if [ -z ${PX4_DOCKER_REPO+x} ]; then
 	echo "guessing PX4_DOCKER_REPO based on input";
-	if [[ $@ =~ .*clang.* ]] || [[ $@ =~ .*scan-build.* ]]; then
+	if [[ $@ =~ .*px4_fmu.* ]]; then
+		# nuttx-px4fmu-v{1,2,3,4,5}
+		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2022-08-12"
+	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]] || [[ $@ =~ .*navigator.* ]]; then
+		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default, bluerobotics_navigator_default
+		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2023-06-26"
+	elif [[ $@ =~ .*pilotpi.arm64 ]]; then
+		# scumaker_pilotpi_arm64
+		PX4_DOCKER_REPO="px4io/px4-dev-aarch64:2022-08-12"
+	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*bebop.* ]]; then
+		# posix_rpi_cross, posix_bebop_default
+		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2023-06-26"
+	elif [[ $@ =~ .*clang.* ]] || [[ $@ =~ .*scan-build.* ]]; then
 		# clang tools
 		PX4_DOCKER_REPO="px4io/px4-dev-clang:2021-02-04"
 	elif [[ $@ =~ .*tests* ]]; then
@@ -15,9 +27,17 @@ fi

 # otherwise default to nuttx
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev:v1.16.0-ondemand"
+	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2022-08-12"
 fi

+# docker hygiene
+
+#Delete all stopped containers (including data-only containers)
+# docker container prune
+
+#Delete all 'untagged/dangling' (<none>) images
+# docker image prune
+
 echo "PX4_DOCKER_REPO: $PX4_DOCKER_REPO";

 PWD=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
@@ -2,7 +2,6 @@

 """
 Generate docs from .msg files
-Also generates docs/en/middleware/dds_topics.md from dds_topics.yaml
 """

 import os
@@ -10,99 +9,6 @@ import argparse
 import sys


-import yaml
-
-def generate_dds_yaml_doc(allMessageFiles, output_file = 'dds_topics.md'):
-    """
-    Generates human readable version of dds_topics.yaml.
-    Default output is to docs/en/middleware/dds_topics.md
-    """
-
-    dds_file_path = os.path.join(os.path.dirname(os.path.realpath(__file__)),"../../src/modules/uxrce_dds_client/dds_topics.yaml")
-    output_file_path = os.path.join(os.path.dirname(os.path.realpath(__file__)),f"../../docs/en/middleware/{output_file}")
-
-    try:
-        with open(dds_file_path, 'r') as file:
-            data = yaml.safe_load(file)
-
-        # Get messages and topics that are not published by default
-        # Start by getting all that are published.
-        all_messages_in_source = set()
-        all_message_types =set()
-        all_topics =set()
-        for message in data["publications"]:
-            all_message_types.add(message['type'].split("::")[-1])
-            all_topics.add(message['topic'].split('/')[-1])
-        for message in data["subscriptions"]:
-            all_message_types.add(message['type'].split("::")[-1])
-            all_topics.add(message['topic'].split('/')[-1])
-        if data["subscriptions_multi"]: # There is none now
-            dds_markdown += "None\n"
-            for message in data["subscriptions_multi"]:
-                all_message_types.add(message['type'].split("::")[-1])
-                all_topics.add(message['topic'].split('/')[-1])
-        for message in allMessageFiles:
-            all_messages_in_source.add(message.split('/')[-1].split('.')[0])
-        messagesNotExported = all_messages_in_source - all_message_types
-
-        # write out the dds file
-        dds_markdown="""# dds_topics.yaml — PX4 Topics Exposed to ROS 2
-
-::: info
-This document is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/msg/generate_msg_docs.py) from the source code.
-:::
-
-
-The [dds_topics.yaml](https://github.com/PX4/PX4-Autopilot/blob/main/src/modules/uxrce_dds_client/dds_topics.yaml) file specifies which uORB message definitions are compiled into the [uxrce_dds_client](../modules/modules_system.md#uxrce-dds-client) module when [PX4 is built](../middleware/uxrce_dds.md#code-generation), and hence which topics are available for ROS 2 applications to subscribe or publish (by default).
-
-This document shows a markdown-rendered version of [dds_topics.yaml](https://github.com/PX4/PX4-Autopilot/blob/main/src/modules/uxrce_dds_client/dds_topics.yaml), listing the publications, subscriptions, and so on.
-
-## Publications
-
-Topic | Type| Rate Limit
--- | --- | ---
-"""
-
-        for message in data["publications"]:
-            type = message['type']
-            px4Type=type.split("::")[-1]
-            dds_markdown += f"`{message['topic']}` | [{type}](../msg_docs/{px4Type}.md) | {message.get('rate_limit','')}\n"
-
-        dds_markdown += "\n## Subscriptions\n\nTopic | Type\n--- | ---\n"
-
-        for message in data["subscriptions"]:
-            type = message['type']
-            px4Type=type.split("::")[-1]
-            dds_markdown += f"{message['topic']} | [{type}](../msg_docs/{px4Type}.md)\n"
-
-        dds_markdown += "\n## Subscriptions Multi\n\n"
-
-        if not data["subscriptions_multi"]: # There is none now
-            dds_markdown += "None\n"
-        else:
-            print("Warning - we now have subscription_multi data - check format")
-            dds_markdown += "Topic | Type\n--- | ---\n"
-            for message in data["subscriptions_multi"]:
-                dds_markdown += f"{message['topic']} | {message['type']}\n"
-
-        if messagesNotExported:
-            # Print the topics that are not exported to DDS
-            dds_markdown += "\n## Not Exported\n\nThese messages are not listed in the yaml file.\nThey are not build into the module, and hence are neither published or subscribed."
-            dds_markdown += "\n\n::: details See messages\n"
-            for item in  messagesNotExported:
-                dds_markdown += f"\n- [{item}](../msg_docs/{item}.md)"
-            dds_markdown += "\n:::\n" # End of details block
-
-        #print(dds_markdown)
-        with open(output_file_path, 'w') as content_file:
-                content_file.write(dds_markdown)
-
-    except yaml.YAMLError as exc:
-        print(f"Error parsing YAML: {exc}")
-    except FileNotFoundError:
-        print(f"Error: {dds_file_path} not found.")
-
-
 def get_msgs_list(msgdir):
    """
    Makes a list of relative paths of .msg files in the given directory
@@ -124,7 +30,6 @@ def get_msgs_list(msgdir):


 if __name__ == "__main__":
-
    parser = argparse.ArgumentParser(description='Generate docs from .msg files')
    parser.add_argument('-d', dest='dir', help='output directory', required=True)
    args = parser.parse_args()
@@ -227,5 +132,3 @@ Graphs showing how these are used [can be found here](../middleware/uorb_graph.m
    index_file = os.path.join(output_dir, 'index.md')
    with open(index_file, 'w') as content_file:
            content_file.write(index_text)
-
-    generate_dds_yaml_doc(msg_files)
@@ -40,25 +40,25 @@ The generated files will be written to the `modules` directory.
 ## Categories
 """
        for category in sorted(module_groups):
-            result += f"- [{category.capitalize()}](modules_{category}.md)\n"
+            result += "- [%s](modules_%s.md)\n" % (category.capitalize(), category)

        self._outputs['main'] = result

        for category in sorted(module_groups):
-            result = f"# Modules Reference: {category.capitalize()}\n\n"
+            result = "# Modules Reference: %s\n" % category.capitalize()
            subcategories = module_groups[category]
-
            if len(subcategories) > 1:
-                result += 'Subcategories:\n\n'
-                for subcategory in sorted(subcategories): 
+                result += 'Subcategories:\n'
+                for subcategory in subcategories:
                    if subcategory == '':
                        continue
                    subcategory_label = subcategory.replace('_', ' ').title()
                    subcategory_file_name = category+'_'+subcategory
-                    result += f'- [{subcategory_label}](modules_{subcategory_file_name}.md)\n'
+                    result += '- [%s](modules_%s.md)\n' % (subcategory_label, subcategory_file_name)

                    # add a sub-page for the subcategory
-                    result_subpage = f'# Modules Reference: {subcategory_label} ({category.capitalize()})\n'
+                    result_subpage = '# Modules Reference: %s (%s)\n' % \
+                        (subcategory_label, category.capitalize())
                    result_subpage += self._ProcessModules(subcategories[subcategory])
                    self._outputs[subcategory_file_name] = result_subpage

@@ -68,14 +68,14 @@ The generated files will be written to the `modules` directory.
    def _ProcessModules(self, module_list):
        result = ''
        for module in module_list:
-            result += f"\n## {module.name()}\n\n"
-            result += f"Source: [{module.scope()}](https://github.com/PX4/PX4-Autopilot/tree/main/src/{module.scope()})\n\n"
+            result += "## %s\n" % module.name()
+            result += "Source: [%s](https://github.com/PX4/PX4-Autopilot/tree/main/src/%s)\n\n" % (module.scope(), module.scope())
            doc = module.documentation()
            if len(doc) > 0:
-                result += f"{doc}\n"
+                result += "%s\n" % doc
            usage_string = module.usage_string()
            if len(usage_string) > 0:
-                result += f'### Usage {{#{module.name()}_usage}}\n\n```\n{usage_string}\n```\n'
+                result += '<a id="%s_usage"></a>\n### Usage\n```\n%s\n```\n' % (module.name(), usage_string)
        return result

    def Save(self, dirname):
@@ -12,11 +12,11 @@ class ModuleDocumentation(object):
    """

    # If you add categories or subcategories, they also need to be added to the
-    # TOC in https://github.com/PX4/PX4-Autopilot/blob/main/docs/en/SUMMARY.md
+    # TOC in https://github.com/PX4/PX4-user_guide/blob/main/en/SUMMARY.md
    valid_categories = ['driver', 'estimator', 'controller', 'system',
                        'communication', 'command', 'template', 'simulation', 'autotune']
    valid_subcategories = ['', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
-                           'magnetometer', 'baro', 'optical_flow', 'radio_control','rpm_sensor', 'transponder']
+                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']

    max_line_length = 80 # wrap lines that are longer than this

@@ -10,7 +10,6 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -42,8 +41,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -132,7 +132,6 @@ ENTRY(_stext)
 */
 EXTERN(abort)
 EXTERN(_bootdelay_signature)
-EXTERN(board_get_manifest)

 SECTIONS
 {
@@ -48,7 +48,6 @@ else()
 		i2c.cpp
 		init.c
 		led.c
-		mtd.cpp
 		spi.cpp
 		timer_config.cpp
 		usb.c
@@ -1,76 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2025 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <nuttx/spi/spi.h>
-#include <px4_platform_common/px4_manifest.h>
-//                                                              KiB BS    nB
-static const px4_mft_device_t spi2 = {             // FM25V01A on FMUM native: 32K X 8, emulated as (1024 Blocks of 32)
-	.bus_type = px4_mft_device_t::SPI,
-	.devid    = SPIDEV_FLASH(0)
-};
-
-static const px4_mtd_entry_t fmum_fram = {
-	.device = &spi2,
-	.npart = 1,
-	.partd = {
-		{
-			.type = MTD_PARAMETERS,
-			.path = "/fs/mtd_params",
-			.nblocks = (32768 / (1 << CONFIG_RAMTRON_EMULATE_PAGE_SHIFT))
-		},
-	},
-};
-
-static const px4_mtd_manifest_t board_mtd_config = {
-	.nconfigs = 1,
-	.entries  = {
-		&fmum_fram
-	}
-};
-
-static const px4_mft_entry_s mtd_mft = {
-	.type = MTD,
-	.pmft = (void *) &board_mtd_config,
-};
-
-static const px4_mft_s mft = {
-	.nmft = 1,
-	.mfts = {
-		&mtd_mft
-	}
-};
-
-const px4_mft_s *board_get_manifest(void)
-{
-	return &mft;
-}
@@ -46,8 +46,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -56,8 +56,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -37,8 +37,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -57,11 +56,9 @@ CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
-CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_UXRCE_DDS_CLIENT=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
@@ -34,25 +34,75 @@
 #pragma once

 // DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     // 1 DMA1:37 IIM-42653
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     // 2 DMA1:38 IIM-42653
-#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0   // 3 DMA1:41 GPS1
-#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0   // 4 DMA1:42 GPS1
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   // 5 DMA1:71 RC
-#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   // 6 DMA1:72 RC
-// Timer 4 (DMAMAP_DMA12_TIM4UP_0)                  // 7 DMA1:32 TIM4UP/TIM4CH1-4
-// Timer 5 (DMAMAP_DMA12_TIM5UP_0)                  // 8 DMA1:50 TIM5UP/TIM5CH1-4
+//                                                     V
+
+// Timer 4 Channel 1                               /* DMA1:29 TIM4CH1 */
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0   /* 1 DMA1:37 IIM-42653 */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0   /* 2 DMA1:38 IIM-42653 */
+
+//#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0  /* 3 DMA1:39 ICM-42688-P */
+//#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0  /* 4 DMA1:40 ICM-42688-P */
+
+#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
+//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
+
+// Timer 8 Channel 1                               /* DMA1:47 TIM8CH1 */
+// Timer 8 Channel 2                               /* DMA1:48 TIM8CH2 */
+// Timer 8 Channel 3                               /* DMA1:49 TIM8CH3 */
+// Timer 8 Channel 4                               /* DMA1:50 TIM8CH4 */
+
+// Timer 5 Channel 1                               /* DMA1:55 TIM5CH1 */
+// Timer 5 Channel 2                               /* DMA1:56 TIM5CH2 */
+// Timer 5 Channel 3                               /* DMA1:57 TIM5CH3 */
+// Timer 5 Channel 4                               /* DMA1:58 TIM5CH4 */
+
+// #define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 UART4 */
+// #define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 UART4 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0 /* 5 DMA1:71 RC */
+// #define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0 /* 6 DMA1:72 RC */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */

 // DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   // 1 DMA2:43 VTX
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    // 2 DMA2:65 VTX
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    // 3 DMA2:66 VTX
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    // 4 DMA2:79 TELEM1
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    // 5 DMA2:80 TELEM1
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   // 6 DMA2:45 DEBUG
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   // 7 DMA2:46 DEBUG
-// available
+//                                                     V
+
+// Timer 4 Channel 1                               /* DMA2:29 TIM4CH1 */
+
+#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   /* 3 DMA2:43 TELEM3 */
+#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_1   /* 4 DMA2:44 TELEM3 */
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
+
+// Timer 8 Channel 1                                 /* DMA2:47 TIM8CH1 */
+// Timer 8 Channel 2                                 /* DMA2:48 TIM8CH2 */
+// Timer 8 Channel 3                                 /* DMA2:49 TIM8CH3 */
+// Timer 8 Channel 4                                 /* DMA2:50 TIM8CH4 */
+
+// Timer 5 Channel 1                                 /* DMA2:55 TIM5CH1 */
+// Timer 5 Channel 2                                 /* DMA2:56 TIM5CH2 */
+// Timer 5 Channel 3                                 /* DMA2:57 TIM5CH3 */
+// Timer 5 Channel 4                                 /* DMA2:58 TIM5CH4 */
+
+//#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
+//#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66 TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79 TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80 TELEM1 */

 // DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
-#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       // 1 BDMA:11 SPI J11
-#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       // 2 BDMA:12 SPI J11
+//                                                     V
+
+#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
+#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */
@@ -260,6 +260,8 @@ CONFIG_USART1_TXDMA=y
 CONFIG_USART2_BAUD=57600
 CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_RXDMA=y
+CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART2_TXDMA=y
 CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
 CONFIG_USART3_RXDMA=y
@@ -270,7 +272,6 @@ CONFIG_USART6_BAUD=57600
 CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_RXDMA=y
 CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USART6_TXDMA=y
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
@@ -1,5 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m4"
-CONFIG_BOARD_ROMFSROOT=""
-CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_DRIVERS_BOOTLOADERS=y
@@ -1,56 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m4"
-CONFIG_BOARD_ROMFSROOT="cannode"
-CONFIG_BOARD_CONSTRAINED_FLASH=y
-CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_BOARD_EXTERNAL_METADATA=y
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
-CONFIG_COMMON_BAROMETERS=y
-CONFIG_DRIVERS_BATT_SMBUS=y
-CONFIG_DRIVERS_BOOTLOADERS=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_AUAV=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_COMMON_HYGROMETERS=y
-CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
-CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-CONFIG_DRIVERS_IRLOCK=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_COMMON_OSD=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_BOARD_UAVCAN_INTERFACES=1
-CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_UAVCANNODE_ARMING_STATUS=y
-CONFIG_UAVCANNODE_BEEP_COMMAND=y
-CONFIG_UAVCANNODE_ESC_RAW_COMMAND=y
-CONFIG_UAVCANNODE_ESC_STATUS=y
-CONFIG_UAVCANNODE_FLOW_MEASUREMENT=y
-CONFIG_UAVCANNODE_GNSS_FIX=y
-CONFIG_UAVCANNODE_HYGROMETER_MEASUREMENT=y
-CONFIG_UAVCANNODE_LIGHTS_COMMAND=y
-CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH=y
-CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT=y
-CONFIG_UAVCANNODE_RAW_AIR_DATA=y
-CONFIG_UAVCANNODE_RAW_IMU=y
-CONFIG_UAVCANNODE_RTK_DATA=y
-CONFIG_UAVCANNODE_SERVO_ARRAY_COMMAND=y
-CONFIG_UAVCANNODE_STATIC_PRESSURE=y
-CONFIG_UAVCANNODE_STATIC_TEMPERATURE=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -1,13 +0,0 @@
-{
-    "board_id": 83,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the ARK CANnode board",
-    "image": "",
-    "build_time": 0,
-    "summary": "ARKCANNODE",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 2080768,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-param set-default MBE_ENABLE 0
-param set-default SENS_IMU_CLPNOTI 0
-param set-default SENS_EN_AUAVX 1
-
-pwm_out start
-
-dshot start
@@ -1,123 +0,0 @@
-#!/bin/sh
-#
-# board sensors init
-#------------------------------------------------------------------------------
-icm42688p -R 0 -s start
-
-if param compare -s SENS_EN_BATT 1
-then
-	batt_smbus start -X
-fi
-
-# Lidar-Lite on I2C
-if param compare -s SENS_EN_LL40LS 2
-then
-	ll40ls start -X
-fi
-
-# mappydot lidar sensor
-if param compare -s SENS_EN_MPDT 1
-then
-	mappydot start -X
-fi
-
-# mb12xx sonar sensor
-if param greater -s SENS_EN_MB12XX 0
-then
-	mb12xx start -X
-fi
-
-# Lightware i2c lidar sensor
-if param greater -s SENS_EN_SF1XX 0
-then
-	lightware_laser_i2c start -X
-fi
-
-# vl53l1x i2c distance sensor
-if param compare -s SENS_EN_VL53L1X 1
-then
-	vl53l1x start -X
-fi
-
-# ADIS16448 spi external IMU
-if param compare -s SENS_EN_ADIS164X 1
-then
-	if param compare -s SENS_OR_ADIS164X 0
-	then
-		adis16448 -S start
-	fi
-	if param compare -s SENS_OR_ADIS164X 4
-	then
-		adis16448 -S start -R 4
-	fi
-fi
-
-# Eagle Tree airspeed sensor external I2C
-if param compare -s SENS_EN_ETSASPD 1
-then
-	ets_airspeed start -X
-fi
-
-# Sensirion SDP3X differential pressure sensor external I2C
-if param compare -s SENS_EN_SDP3X 1
-then
-	if ! sdp3x start -X
-	then
-		# try another common address
-		sdp3x start -X -a 0x22
-	fi
-fi
-
-# SHT3x temperature and hygrometer sensor, external I2C
-if param compare -s SENS_EN_SHT3X 1
-then
-	sht3x start -X
-	sht3x start -X -a 0x45
-fi
-
-# TE MS4525DO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4525DO 1
-then
-	ms4525do start -X
-fi
-
-# TE MS5525DSO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS5525DS 1
-then
-	ms5525dso start -X
-fi
-
-# IR-LOCK sensor external I2C
-if param compare -s SENS_EN_IRLOCK 1
-then
-	irlock start -X
-fi
-
-# SPL06 sensor external I2C
-if param compare -s SENS_EN_SPL06 1
-then
-	spl06 -X start
-	spl06 -X -a 0x77 start
-fi
-
-# AUAV absolute/differential pressure sensor external I2C
-if param greater -s SENS_EN_AUAVX 0
-then
-	auav start -D -X
-	auav start -A -X
-fi
-
-# probe for optional external I2C devices
-icm20948_i2c_passthrough -X -q start
-
-# compasses
-hmc5883 -T -X -q start
-ist8308 -X -q start
-ist8310 -X -q start
-iis2mdc -X -q start
-lis3mdl -X -q start
-qmc5883l -X -q start
-rm3100 -X -q start
-
-# start last (wait for possible icm20948 passthrough mode)
-ak09916 -X -q start
@@ -1,56 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/auterion/cannode/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F412CE=y
-CONFIG_ARCH_INTERRUPTSTACK=4096
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BINFMT_DISABLE=y
-CONFIG_BOARDCTL=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_INIT_STACKSIZE=4096
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=0
-CONFIG_NUNGET_CHARS=0
-CONFIG_PREALLOC_TIMERS=0
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_DISABLE_BUFFERING=y
-CONFIG_STM32_FLASH_CONFIG_G=y
-CONFIG_STM32_NOEXT_VECTORS=y
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_USEC_PER_TICK=1000
@@ -1,149 +0,0 @@
-/************************************************************************************
- * configs/px4fmu/include/board.h
- * include/arch/board/board.h
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#include "board_dma_map.h"
-
-#ifndef __ARCH_BOARD_BOARD_H
-#define __ARCH_BOARD_BOARD_H
-
-#include <nuttx/config.h>
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include <stm32.h>
-
-/* HSI - 8 MHz RC factory-trimmed
- * LSI - 32 KHz RC
- * HSE - 8  MHz Crystal
- * LSE - not installed
- */
-#define STM32_BOARD_USEHSE      1
-#define STM32_BOARD_XTAL        8000000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-
-/* Main PLL Configuration */
-#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
-#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
-#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
-#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
-#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
-
-#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
-
-#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
-#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
-#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
-
-#define STM32_SYSCLK_FREQUENCY  96000000ul
-
-/* AHB clock (HCLK) is SYSCLK (96MHz) */
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
-
-/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* APB2 clock (PCLK2) is HCLK (96MHz) */
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
-#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
-
-/* Timers driven from APB2 will be PCLK2 since no prescale division */
-#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
-
-/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
-#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
-
-/* Alternate function pin selections ************************************************/
-
-/* UARTs */
-#define GPIO_USART1_RX	GPIO_USART1_RX_2
-#define GPIO_USART1_TX	GPIO_USART1_TX_3
-
-#define GPIO_USART2_RX	GPIO_USART2_RX_1
-#define GPIO_USART2_TX	GPIO_USART2_TX_1
-
-/* CAN */
-#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
-#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
-
-/* SPI */
-#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
-#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
-#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
-
-#define GPIO_SPI2_MISO  GPIO_SPI2_MISO_1 /* PB14 */
-#define GPIO_SPI2_MOSI  GPIO_SPI2_MOSI_1 /* PB15 */
-#define GPIO_SPI2_SCK   GPIO_SPI2_SCK_2  /* PB13 */
-
-/* I2C */
-#define GPIO_MCU_I2C1_SCL
-#define GPIO_MCU_I2C1_SDA
-
-#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1
-#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_2
-
-#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
-#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
-
-#endif /* __ARCH_BOARD_BOARD_H */
@@ -1,50 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMA1 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX   // DMA1, Stream 3, Channel 0
-#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX   // DMA1, Stream 4, Channel 0
-
-//  DMA2 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_2   // DMA2, Stream 2, Channel 3
-#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_2   // DMA2, Stream 5, Channel 3
-
-// Assigned in timer_config.cpp
-
-// Timer 2                                    /* DMA1, Stream 7, Channel 3 DMAMAP_TIM2_UP_2 */
-// Timer 3                                    /* DMA1, Stream 2, Channel 5 DMAMAP_TIM3_UP   */
-// Timer 4                                    /* DMA1, Stream 6, Channel 2 DMAMAP_TIM4_UP   */
@@ -1,153 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_CAT is not set
-# CONFIG_NSH_DISABLE_CD is not set
-# CONFIG_NSH_DISABLE_CP is not set
-# CONFIG_NSH_DISABLE_DATE is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_ECHO is not set
-# CONFIG_NSH_DISABLE_ENV is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXPORT is not set
-# CONFIG_NSH_DISABLE_FREE is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_KILL is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_LS is not set
-# CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MOUNT is not set
-# CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
-# CONFIG_NSH_DISABLE_PWD is not set
-# CONFIG_NSH_DISABLE_RM is not set
-# CONFIG_NSH_DISABLE_RMDIR is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_SET is not set
-# CONFIG_NSH_DISABLE_SLEEP is not set
-# CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TEST is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_NSH_DISABLE_UMOUNT is not set
-# CONFIG_NSH_DISABLE_UNSET is not set
-# CONFIG_NSH_DISABLE_USLEEP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/auterion/cannode/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F412CE=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="nsh_main"
-CONFIG_INIT_STACKSIZE=2624
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_VARS=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20000000
-CONFIG_RAW_BINARY=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=254
-CONFIG_SCHED_HPWORKSTACKSIZE=3000
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_WAITPID=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
-CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_FLASH_CONFIG_G=y
-CONFIG_STM32_FLASH_PREFETCH=y
-CONFIG_STM32_FLOWCONTROL_BROKEN=y
-CONFIG_STM32_I2C1=y
-CONFIG_STM32_JTAG_SW_ENABLE=y
-CONFIG_STM32_PWR=y
-CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32_SPI1=y
-CONFIG_STM32_SPI1_DMA=y
-CONFIG_STM32_SPI1_DMA_BUFFER=2048
-CONFIG_STM32_SPI2=y
-CONFIG_STM32_SPI2_DMA=y
-CONFIG_STM32_SPI2_DMA_BUFFER=2048
-CONFIG_STM32_USART1=y
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART_BREAKS=y
-CONFIG_STM32_WWDG=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=1100
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_SERIAL_CONSOLE=y
-CONFIG_USART2_TXBUFSIZE=1100
-CONFIG_USEC_PER_TICK=1000
@@ -1,134 +0,0 @@
-/****************************************************************************
- * nuttx-config/scripts/canbootloader_script.ld
- *
- *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 512Kb of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,146 +0,0 @@
-/****************************************************************************
- * scripts/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412CG has 1Mb of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(8);
-		/*
-		* This section positions the app_descriptor_t used
-		* by the make_can_boot_descriptor.py tool to set
-		* the application image's descriptor so that the
-		* uavcan bootloader has the ability to validate the
-		* image crc, size etc
-		*/
-		KEEP(*(.app_descriptor))
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,68 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
-
-	add_library(drivers_board
-		boot_config.h
-		boot.c
-		led.c
-		led.h
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			canbootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
-
-else()
-	add_library(drivers_board
-		can.c
-		i2c.cpp
-		init.c
-		led.c
-		spi.cpp
-		timer_config.cpp
-	)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_spi
-			drivers__led # drv_led_start
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-	)
-endif()
@@ -1,115 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * board internal definitions
- */
-
-#pragma once
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-/* CAN  Silent mode control */
-#define GPIO_CAN1_SILENT_S0   /* PC14  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN14)
-
-/* CAN termination software control */
-#define GPIO_CAN1_TERMINATION /* PC15 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN15)
-#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
-
-/* Boot config */
-#define GPIO_BOOT_CONFIG      /* PH1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTH|GPIO_PIN1|GPIO_EXTI)
-
-/* ICM42688p FSYNC */
-#define GPIO_42688P_FSYNC     /* PB8  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
-
-/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
-#define GPIO_TIM1_CH1         /* PA8  */  (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-#define GPIO_TIM1_CH2         /* PA9  */  (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-#define GPIO_TIM1_CH3         /* PA10 */  (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-
-/* PWM Outputs */
-#define BOARD_NUM_IO_TIMERS         3
-#define DIRECT_PWM_OUTPUT_CHANNELS  8
-
-#define GPIO_TIM2_CH1_RESET   /* PA0  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
-#define GPIO_TIM2_CH2_RESET   /* PA1  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1)
-#define GPIO_TIM2_CH3_RESET   /* PB10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
-#define GPIO_TIM3_CH1_RESET   /* PB4  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN4)
-#define GPIO_TIM3_CH2_RESET   /* PB5  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
-#define GPIO_TIM3_CH3_RESET   /* PB0  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
-#define GPIO_TIM3_CH4_RESET   /* PB1  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
-#define GPIO_TIM4_CH4_RESET   /* PB7  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)
-
-#define GPIO_I2C1_SCL_RESET   /* PB6  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
-#define GPIO_I2C1_SDA_RESET   /* PB9  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
-
-#define GPIO_USART1_RX_GPIO   /* PB3  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTB|GPIO_PIN3)
-#define GPIO_USART1_TX_GPIO   /* PA15  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN15)
-
-#define GPIO_USART2_RX_GPIO   /* PA3  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN3)
-#define GPIO_USART2_TX_GPIO   /* PA2  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN2)
-
-#define FLASH_BASED_PARAMS
-
-/* High-resolution timer */
-#define HRT_TIMER                    8  /* use timer 8 for the HRT */
-#define HRT_TIMER_CHANNEL            1  /* use capture/compare channel 1 */
-
-#define PX4_GPIO_INIT_LIST { \
-		GPIO_CAN1_SILENT_S0,              \
-		GPIO_CAN1_TERMINATION,            \
-		GPIO_42688P_FSYNC,                \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_I2C1_SCL_RESET,              \
-		GPIO_I2C1_SDA_RESET,              \
-	}
-
-__BEGIN_DECLS
-
-#define BOARD_HAS_N_S_RGB_LED       1
-#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
-
-#ifndef __ASSEMBLY__
-
-extern void stm32_spiinitialize(void);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS
@@ -1,188 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *       Author: Ben Dyer <ben_dyer@mac.com>
- *               Pavel Kirienko <pavel.kirienko@zubax.com>
- *               David Sidrane <david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <px4_config.h>
-#include <stdint.h>
-#include "boot_config.h"
-#include "board.h"
-
-#include <debug.h>
-#include <string.h>
-#include <arch/board/board.h>
-
-#include <nuttx/board.h>
-#include "led.h"
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-	stm32_configgpio(GPIO_CAN1_SILENT_S0);
-	stm32_configgpio(GPIO_CAN1_TERMINATION);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-
-#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
-	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
-#endif
-
-}
-
-/************************************************************************************
- * Name: board_deinitialize
- *
- * Description:
- *   This function is called by the bootloader code prior to booting
- *   the application. Is should place the HW into an benign initialized state.
- *
- ************************************************************************************/
-
-void board_deinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-}
-
-/****************************************************************************
- * Name: board_get_product_name
- *
- * Description:
- *   Called to retrieve the product name. The returned value is a assumed
- *   to be written to a pascal style string that will be length prefixed
- *   and not null terminated
- *
- * Input Parameters:
- *    product_name - A pointer to a buffer to write the name.
- *    maxlen       - The maximum number of charter that can be written
- *
- * Returned Value:
- *   The length of characters written to the buffer.
- *
- ****************************************************************************/
-
-uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
-{
-	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
-}
-
-/****************************************************************************
- * Name: board_get_hardware_version
- *
- * Description:
- *   Called to retrieve the hardware version information. The function
- *   will first initialize the the callers struct to all zeros.
- *
- * Input Parameters:
- *    hw_version - A pointer to a uavcan_hardwareversion_t.
- *
- * Returned Value:
- *   Length of the unique_id
- *
- ****************************************************************************/
-
-size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
-{
-	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
-
-	hw_version->major = HW_VERSION_MAJOR;
-	hw_version->minor = HW_VERSION_MINOR;
-
-	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
-}
-
-/****************************************************************************
- * Name: board_indicate
- *
- * Description:
- *   Provides User feedback to indicate the state of the bootloader
- *   on board specific  hardware.
- *
- * Input Parameters:
- *    indication - A member of the uiindication_t
- *
- * Returned Value:
- *   None
- *
- ****************************************************************************/
-#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
-
-typedef begin_packed_struct struct led_t {
-	uint8_t red;
-	uint8_t green;
-	uint8_t blue;
-	uint8_t hz;
-} end_packed_struct led_t;
-
-static const  led_t i2l[] = {
-
-	led(0, off,                             0,     0,     0,     0),
-	led(1, reset,                          128,   128,   128,   30),
-	led(2, autobaud_start,                  0,   128,     0,     1),
-	led(3, autobaud_end,                    0,   128,     0,     2),
-	led(4, allocation_start,                0,     0,    64,     2),
-	led(5, allocation_end,                  0,   128,    64,     3),
-	led(6, fw_update_start,                32,   128,    64,     3),
-	led(7, fw_update_erase_fail,           32,   128,    32,     3),
-	led(8, fw_update_invalid_response,     64,     0,     0,     1),
-	led(9, fw_update_timeout,              64,     0,     0,     2),
-	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
-	led(b, jump_to_app,                     0,   128,     0,    10),
-
-};
-
-void board_indicate(uiindication_t indication)
-{
-	rgb_led(i2l[indication].red,
-		i2l[indication].green,
-		i2l[indication].blue,
-		i2l[indication].hz);
-}
@@ -1,134 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/*
- * @file boot_config.h
- *
- * bootloader definitions that configures the behavior and options
- * of the Boot loader
- * This file is relies on the parent folder's boot_config.h file and defines
- * different usages of the hardware for bootloading
- */
-
-#pragma once
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-/* Bring in the board_config.h definitions
- * todo:make this be pulled in from a targed's build
- * files in nuttx*/
-
-#include "board_config.h"
-#include "uavcan.h"
-#include <nuttx/compiler.h>
-
-#include <stdint.h>
-
-#include <stm32_flash.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
-
-//todo:wrap OPT_x in in ifdefs for command line definitions
-#define OPT_TBOOT_MS                    3000
-#define OPT_NODE_STATUS_RATE_MS         800
-#define OPT_NODE_INFO_RATE_MS           50
-#define OPT_BL_NUMBER_TIMERS            7
-
-/*
- *  This Option set is set to 1 ensure a provider of firmware has an
- *  opportunity update the node's firmware.
- *  This Option is the default policy and can be overridden by
- *  a jumper
- *  When this Policy is set, the node will ignore tboot and
- *  wait indefinitely for a GetNodeInfo request before booting.
- *
- *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
- *  the polarity of the jumper to be True Active
- *
- *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
- *                                                 Jumper
- *   yes           1                       0         x
- *   yes           1                       1       Active
- *   no            1                       1       Not Active
- *   no            0                       0         X
- *   yes           0                       1       Active
- *   no            0                       1       Not Active
- *
- */
-#define OPT_WAIT_FOR_GETNODEINFO                    0
-/* The ARK CANnode uses PH1 for GPIO_BOOT_CONFIG but it is not
- * compatible with px4_arch_gpioread as Port H = 7 which is greater
- * than STM32_NPORTS
- * #define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        0
- */
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 1
-
-#define OPT_ENABLE_WD           1
-
-#define OPT_RESTART_TIMEOUT_MS          20000
-
-/* Reserved for the Booloader */
-#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
-
-/* Reserved for the application out of the total
- * system flash minus the BOOTLOADER_SIZE_IN_K
- */
-#define OPT_APPLICATION_RESERVER_IN_K    0
-
-#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
-#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
-
-
-#define FLASH_BASE              STM32_FLASH_BASE
-#define FLASH_SIZE              STM32_FLASH_SIZE
-
-#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
-#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
-#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
-
-/* If this board uses big flash that have large sectors */
-
-#define OPT_USE_YIELD
-
-/* Bootloader Option*****************************************************************
- *
- */
-#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)
@@ -1,130 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file can.c
- *
- * Board-specific CAN functions.
- */
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_internal.h"
-
-#include "stm32.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-#ifdef CONFIG_CAN
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif
@@ -1,38 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-};
@@ -1,186 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * board specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/tasks.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include <nuttx/board.h>
-
-#include <stm32.h>
-#include "board_config.h"
-#include "led.h"
-#include <stm32_uart.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <drivers/drv_watchdog.h>
-
-#include <systemlib/px4_macros.h>
-
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-
-#include <px4_arch/io_timer.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-/************************************************************************************
- * Name: board_on_reset
- *
- * Description:
- * Optionally provided function called on entry to board_system_reset
- * It should perform any house keeping prior to the rest.
- *
- * status - 1 if resetting to boot loader
- *          0 if just resetting
- *
- ************************************************************************************/
-__EXPORT void board_on_reset(int status)
-{
-	// Configure the GPIO pins to outputs and keep them low.
-	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
-	}
-
-	/*
-	 * On resets invoked from system (not boot) insure we establish a low
-	 * output state (discharge the pins) on PWM pins before they become inputs.
-	 */
-
-	if (status >= 0) {
-		up_mdelay(400);
-	}
-}
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	// Reset all PWM to Low outputs.
-	board_on_reset(-1);
-
-	watchdog_init();
-
-	/* configure pins */
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-
-	// Configure SPI all interfaces GPIO & enable power.
-	stm32_spiinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	px4_platform_init();
-
-#if defined(SERIAL_HAVE_RXDMA)
-	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
-	static struct hrt_call serial_dma_call;
-	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
-#endif
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{2, 16 * 1024, 0x08008000},
-		{3, 16 * 1024, 0x0800C000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-	}
-
-#endif // FLASH_BASED_PARAMS
-
-	/* Configure the HW based on the manifest */
-	//px4_platform_configure();
-
-	return OK;
-}
@@ -1,124 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-#include "led.h"
-
-#define TMR_BASE        STM32_TIM1_BASE
-#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
-#define TMR_REG(o)      (TMR_BASE+(o))
-
-void rgb_led(int r, int g, int b, int freqs)
-{
-
-	long fosc = TMR_FREQUENCY;
-	long prescale = 2048;
-	long p1s = fosc / prescale;
-	long p0p5s  = p1s / 2;
-	uint16_t val;
-	static bool once = 0;
-
-	if (!once) {
-		once = 1;
-
-		/* Enable Clock to Block */
-		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
-
-		/* Reload */
-
-		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
-		val |= ATIM_EGR_UG;
-		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
-
-		/* Set Prescaler STM32_TIM_SETCLOCK */
-
-		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
-
-		/* Enable STM32_TIM_SETMODE*/
-
-		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-
-		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
-			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
-		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
-		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
-			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
-			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
-
-
-		stm32_configgpio(GPIO_TIM1_CH1);
-		stm32_configgpio(GPIO_TIM1_CH2);
-		stm32_configgpio(GPIO_TIM1_CH3);
-
-		/* master output enable = on */
-		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
-	}
-
-	long p  = freqs == 0 ? p1s : p1s / freqs;
-	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
-
-	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
-
-	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
-	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
-	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
-
-	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-	if (freqs == 0) {
-		val &= ~ATIM_CR1_CEN;
-
-	} else {
-		val |= ATIM_CR1_CEN;
-	}
-
-	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-}
@@ -1,37 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
- *   Author: David Sidrane<david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-__BEGIN_DECLS
-void rgb_led(int r, int g, int b, int freqs);
-__END_DECLS
@@ -1,48 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI1, {
-		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin2}),
-	}),
-	initSPIBusExternal(SPI::Bus::SPI2, {
-		initSPIConfigExternal(SPI::CS{GPIO::PortB, GPIO::Pin12}),
-		initSPIConfigExternal(SPI::CS{GPIO::PortC, GPIO::Pin13}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -1,54 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/io_timer_hw_description.h>
-
-constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
-	initIOTimer(Timer::Timer2, DMA{DMA::Index1, DMA::Stream7, DMA::Channel3}),
-	initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
-	initIOTimer(Timer::Timer4, DMA{DMA::Index1, DMA::Stream6, DMA::Channel2}),
-};
-
-constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
-	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel2}, {GPIO::PortA, GPIO::Pin1}),
-	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortB, GPIO::Pin10}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel1}, {GPIO::PortB, GPIO::Pin4}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel2}, {GPIO::PortB, GPIO::Pin5}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortB, GPIO::Pin7}),
-};
-
-constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
-	initIOTimerChannelMapping(io_timers, timer_io_channels);
@@ -1,17 +0,0 @@
-# UAVCAN boot loadable Module ID
-set(uavcanblid_sw_version_major ${PX4_VERSION_MAJOR})
-set(uavcanblid_sw_version_minor ${PX4_VERSION_MINOR})
-add_definitions(
-	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
-	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
-)
-
-set(uavcanblid_hw_version_major 0)
-set(uavcanblid_hw_version_minor 83)
-set(uavcanblid_name "\"org.auterion.cannode\"")
-
-add_definitions(
-	-DHW_UAVCAN_NAME=${uavcanblid_name}
-	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
-	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
-)
@@ -37,8 +37,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_FIGURE_OF_EIGHT=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
@@ -26,6 +26,3 @@ nshterm /dev/ttyS3 &

 # Start the time_persistor to cyclically store the RTC in FRAM
 time_persistor start
-
-# Start the ESC telemetry
-dshot telemetry -d /dev/ttyS5 -x
@@ -3,8 +3,7 @@ CONFIG_MODE_NAVIGATOR_VTOL_TAKEOFF=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_MODE_MANAGER=n
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_POS_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_COMMON_RC=y
@@ -2,8 +2,7 @@ CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_MODE_MANAGER=n
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_POS_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
@@ -42,8 +42,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -30,8 +30,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -49,8 +49,7 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MC_ATT_CONTROL=y
@@ -38,8 +38,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -42,8 +42,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -50,8 +50,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -50,8 +50,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -49,8 +49,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -50,8 +50,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -46,8 +46,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -32,8 +32,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -39,8 +39,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -10,4 +10,4 @@
 # fi

 # DShot telemetry is always on UART7
-# dshot telemetry -d /dev/ttyS5
+# dshot telemetry /dev/ttyS5
@@ -41,8 +41,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -10,4 +10,4 @@
 # fi

 # DShot telemetry is always on UART7
-# dshot telemetry -d /dev/ttyS5
+# dshot telemetry /dev/ttyS5
@@ -44,8 +44,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -9,4 +9,4 @@ then
 fi

 # DShot telemetry is always on UART7
-dshot telemetry -d /dev/ttyS5
+dshot telemetry /dev/ttyS5
@@ -13,11 +13,13 @@ CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_OSD_ATXXXX=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_COMMON_TELEMETRY=y
@@ -35,8 +37,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -56,7 +57,9 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
@@ -66,7 +69,6 @@ CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
@@ -7,7 +7,7 @@
    "summary": "KAKUTEH7-WING",
    "version": "0.1",
    "image_size": 0,
-    "image_maxsize": 1703936,
+    "image_maxsize": 1835008,
    "git_identity": "",
    "board_revision": 0
 }
@@ -110,7 +110,7 @@
 MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1664K /* params in last two sectors */
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */

 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
@@ -114,6 +114,7 @@

 #define BOARD_NUMBER_BRICKS 2

+// TODO: fix
 #define GPIO_nVDD_BRICK1_VALID          (1) /* Brick 1 Is Chosen */
 #define GPIO_nVDD_BRICK2_VALID          (0) /* Brick 2 Is Chosen  */

@@ -128,20 +129,17 @@
 */
 #define UAVCAN_NUM_IFACES_RUNTIME  1

-#define GPIO_VDD_3V3_SENSORS_EN         /* PB2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN2)
-
-#define GPIO_VTX_9V_EN                  /* PE3  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
-
-#define GPIO_CAM_SWITCH                 /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+#define GPIO_VDD_5V_PERIPH_nEN          /* PE2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
+#define GPIO_VDD_5V_PERIPH_nOC          /* PE3  */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTE|GPIO_PIN3)
+#define GPIO_VDD_5V_HIPOWER_nEN         /* PC10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN10)
+#define GPIO_VDD_5V_HIPOWER_nOC         /* PC11 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTC|GPIO_PIN11)
+#define GPIO_VDD_3V3_SENSORS_EN         /* PB2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN2)

 /* Define True logic Power Control in arch agnostic form */

-#define VDD_3V3_SENSORS_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, (on_true))
-
-#define VTX_9V_EN(on_true)                px4_arch_gpiowrite(GPIO_VTX_9V_EN, (on_true))
-
-#define CAM_SWITCH_CAM1                   px4_arch_gpiowrite(GPIO_CAM_SWITCH, false) // low is CAM1
-#define CAM_SWITCH_CAM2                   px4_arch_gpiowrite(GPIO_CAM_SWITCH, true)  // high is CAM2
+#define VDD_5V_PERIPH_EN(on_true)          px4_arch_gpiowrite(GPIO_VDD_5V_PERIPH_nEN, !(on_true))
+#define VDD_5V_HIPOWER_EN(on_true)         px4_arch_gpiowrite(GPIO_VDD_5V_HIPOWER_nEN, !(on_true))
+#define VDD_3V3_SENSORS_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS4_EN, (on_true))

 /* Tone alarm output */

@@ -198,10 +196,11 @@

 #define BOARD_ADC_SERVO_VALID     (1)

-#define BOARD_ADC_BRICK1_VALID  (1)
-#define BOARD_ADC_BRICK2_VALID  (1)
+#define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))

-#define BOARD_ADC_SERVO_VALID   (1)
+#define BOARD_ADC_PERIPH_5V_OC  (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_nOC))
+#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_nOC))


 /* This board provides a DMA pool and APIs */
@@ -218,8 +217,6 @@
 		GPIO_VDD_3V3_SENSORS_EN,          \
 		GPIO_TONE_ALARM_IDLE,             \
 		GPIO_PPM_IN,                      \
-		GPIO_VTX_9V_EN,                   \
-		GPIO_CAM_SWITCH,                  \
 	}

 #define BOARD_ENABLE_CONSOLE_BUFFER
@@ -108,21 +108,21 @@ __END_DECLS
 ************************************************************************************/
 __EXPORT void board_peripheral_reset(int ms)
 {
-	/* off */
-	VTX_9V_EN(false);
-	VDD_3V3_SENSORS_EN(false);
+	/* set the peripheral rails off */

+	VDD_5V_PERIPH_EN(false);
 	board_control_spi_sensors_power(false, 0xffff);

+	/* wait for the peripheral rail to reach GND */
 	usleep(ms * 1000);
 	syslog(LOG_DEBUG, "reset done, %d ms\n", ms);

 	/* re-enable power */
-	board_control_spi_sensors_power(true, 0xffff);
-	VDD_3V3_SENSORS_EN(true);
-	VTX_9V_EN(true);

-	CAM_SWITCH_CAM1;
+	/* switch the peripheral rail back on */
+	board_control_spi_sensors_power(true, 0xffff);
+	VDD_5V_PERIPH_EN(true);
+
 }

 /************************************************************************************
@@ -210,6 +210,10 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 {
 #if !defined(BOOTLOADER)

+	/* Power on Interfaces */
+	VDD_5V_PERIPH_EN(true);
+	VDD_5V_HIPOWER_EN(true);
+
 	/* Need hrt running before using the ADC */

 	px4_platform_init();
@@ -250,7 +254,6 @@ __EXPORT int board_app_initialize(uintptr_t arg)

 #if defined(FLASH_BASED_PARAMS)
 	static sector_descriptor_t params_sector_map[] = {
-		{14, 128 * 1024, 0x081C0000},
 		{15, 128 * 1024, 0x081E0000},
 		{0, 0, 0},
 	};
@@ -45,8 +45,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -9,4 +9,4 @@ then
 fi

 # DShot telemetry is always on UART7
-dshot telemetry -d /dev/ttyS5
+dshot telemetry /dev/ttyS5
@@ -48,8 +48,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -9,4 +9,4 @@ then
 fi

 # DShot telemetry is always on UART7
-dshot telemetry -d /dev/ttyS5
+dshot telemetry /dev/ttyS5
@@ -45,8 +45,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -9,4 +9,4 @@ then
 fi

 # DShot telemetry is always on UART7
-dshot telemetry -d /dev/ttyS5
+dshot telemetry /dev/ttyS5
@@ -45,8 +45,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -9,4 +9,4 @@ then
 fi

 # DShot telemetry is always on UART7
-dshot telemetry -d /dev/ttyS5
+dshot telemetry /dev/ttyS5
@@ -50,8 +50,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -30,8 +30,7 @@ CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -11,4 +11,4 @@
 atxxxx start -s

 # DShot telemetry is always on UART7
-# dshot telemetry -d /dev/ttyS5
+# dshot telemetry /dev/ttyS5
@@ -33,8 +33,7 @@ CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -12,4 +12,4 @@ atxxxx start -s


 # DShot telemetry is always on UART7
-# dshot telemetry -d /dev/ttyS5
+# dshot telemetry /dev/ttyS5
@@ -32,8 +32,7 @@ CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -12,4 +12,4 @@ atxxxx start -s


 # DShot telemetry is always on UART7
-# dshot telemetry -d /dev/ttyS5
+# dshot telemetry /dev/ttyS5
@@ -39,8 +39,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -40,8 +40,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -38,8 +38,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
@@ -49,8 +49,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -40,8 +40,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -46,8 +46,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -44,8 +44,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -44,8 +44,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -42,8 +42,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -43,8 +43,7 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
-CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ramon Roche	55168855e6	docs: update release notes from list of prs Signed-off-by: Ramon Roche <mrpollo@gmail.com>	2025-05-19 10:34:02 -07:00
Ramon Roche	05b018c185	docs: release notes for v1.16 Signed-off-by: Ramon Roche <mrpollo@gmail.com>	2025-05-19 08:20:07 -07:00