do not merge

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
2026-06-08 04:40:06 +08:00 · 2025-09-30 09:26:39 -07:00
713 changed files with 4659 additions and 30759 deletions
@@ -1,24 +0,0 @@
-runners:
-  x86-small-runner:
-    cpu: [1, 2]
-    ram: [1, 4]
-    disk: default
-    spot: price-capacity-optimized
-    image: ubuntu24-full-x64
-    extras: s3-cache
-  x86-firmware-builder:
-    cpu: [4, 8]
-    ram: [8, 16]
-    disk: default
-    family: ["c7i", "m7i", "r7i"]
-    spot: price-capacity-optimized
-    image: ubuntu24-full-x64
-    extras: s3-cache
-  arm64-firmware-builder:
-    cpu: [4, 8]
-    ram: [8, 16]
-    disk: default
-    family: ["c7g", "m7g", "r7g"]
-    spot: price-capacity-optimized
-    image: ubuntu24-full-arm64
-    extras: s3-cache
@@ -26,15 +26,11 @@ concurrency:
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

-permissions:
-  contents: write
-  actions: read
-
 jobs:
  group_targets:
    name: Scan for Board Targets
    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
    outputs:
      matrix: ${{ steps.set-matrix.outputs.matrix }}
      timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
@@ -42,14 +38,6 @@ jobs:
    steps:
      - uses: actions/checkout@v4

-      - name: Cache Python pip
-        uses: actions/cache@v4
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip-${{ hashFiles('**./Tools/setup/requirements.txt') }}
-          restore-keys: |
-            ${{ runner.os }}-pip-
-
      - name: Update python packaging to avoid canonicalize_version() error
        run: |
            pip3 install -U packaging
@@ -60,15 +48,12 @@ jobs:
          path: "./Tools/setup/requirements.txt"

      - id: set-matrix
-        name: Generate Build Matrix
-        run: echo "matrix=$(./Tools/ci/generate_board_targets_json.py --group)" >> $GITHUB_OUTPUT
+        run: echo "::set-output name=matrix::$(./Tools/ci/generate_board_targets_json.py --group)"

      - id: set-timestamp
-        name: Save Current Timestamp
-        run: echo "timestamp=$(date +"%Y%m%d%H%M%S")" >> $GITHUB_OUTPUT
+        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"

      - id: set-branch
-        name: Save Current Branch Name
        run: |
          echo "branchname=${{
            github.event_name == 'pull_request' &&
@@ -85,7 +70,7 @@ jobs:
          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"

  setup:
-    name: Build [${{ matrix.runner }}][${{ matrix.group }}]
+    name: Build Group [${{ matrix.group }}][${{ matrix.arch == 'nuttx' && 'x86' || 'arm64' }}]
    # runs-on: ubuntu-latest
    runs-on: [runs-on,"runner=8cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",spot=false]
    needs: group_targets
@@ -95,7 +80,6 @@ jobs:
    container:
      image: ${{ matrix.container }}
    steps:
-      - uses: runs-on/action@v2
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0
@@ -103,24 +87,14 @@ jobs:
      - name: Git ownership workaround
        run: git config --system --add safe.directory '*'

-      # ccache key breakdown:
-      # ccache-<system os>-<system arch>-<builder group>-
-      # ccache-<linux>-<arm64>-<aarch64-0>-
-      # ccache-<linux>-<x64>-<nuttx-0>-
-      - name: Cache Restore from Key
-        id: cc_restore
-        uses: actions/cache/restore@v4
+      - name: Setup ccache
+        uses: actions/cache@v4
        with:
          path: ~/.ccache
-          key: ${{ format('ccache-{0}-{1}-{2}', runner.os, matrix.runner, matrix.group) }}
-          restore-keys: |
-            ccache-${{ runner.os }}-${{ matrix.runner }}-${{ matrix.group }}-
-            ccache-${{ runner.os }}-${{ matrix.runner }}-
-            ccache-${{ runner.os }}-${{ matrix.runner }}-
-            ccache-${{ runner.os }}-
-            ccache-
+          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
+          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}

-      - name: Cache Config and Stats
+      - name: Configure ccache
        run: |
            mkdir -p ~/.ccache
            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
@@ -128,11 +102,10 @@ jobs:
            echo "compression_level = 6" >> ~/.ccache/ccache.conf
            echo "max_size = 120M" >> ~/.ccache/ccache.conf
            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            echo "compiler_check = content" >> ~/.ccache/ccache.conf
            ccache -s
            ccache -z

-      - name: Building Artifacts for [${{ matrix.targets }}]
+      - name: Building [${{ matrix.group }}]
        run: |
            ./Tools/ci/build_all_runner.sh ${{matrix.targets}} ${{matrix.arch}}

@@ -146,27 +119,15 @@ jobs:
          name: px4_${{matrix.group}}_build_artifacts
          path: artifacts/

-      - name: Cache Post Build Stats
-        if: always()
-        run: |
-            ccache -s
-            ccache -z
-
      - name: Cache Save
-        if: always()
-        uses: actions/cache/save@v4
-        with:
-          path: ~/.ccache
-          key: ${{ steps.cc_restore.outputs.cache-primary-key }}
+        run: ccache -s

  artifacts:
-    name: Upload Artifacts
+    name: Upload Artifacts to S3
    # runs-on: ubuntu-latest
    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/v') || contains(fromJSON('["main","stable","beta"]'), needs.group_targets.outputs.branchname)
-    outputs:
-      uploadlocation: ${{ steps.upload-location.outputs.uploadlocation }}
+    if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
    steps:
      - name: Download Artifacts
        uses: actions/download-artifact@v4
@@ -174,36 +135,11 @@ jobs:
          path: artifacts/
          merge-multiple: true

-      - name: Choose Upload Location
-        id: upload-location
+      - name: Branch Name
        run: |
-          # Determine upload location based on branch or tag with the following considerations:
-          # Destination: AWS S3 bucket px4-travis in folder Firmware/
-          # - If branch is main -> upload to master/
-          #   - Older versions of QGC are hardocded to look for master/
-          # - If branch is stable or beta -> upload to stable/ or beta/
-          # - If a tag vX.Y.Z -> upload to vX.Y.Z/
-          #   - Also update stable/ to point to the same version
-          #.  - Older versions of QGC are hardocded to look for stable/
-          # - If a pull request -> do not upload
-          set -euo pipefail
+          echo "${{ needs.group_targets.outputs.branchname }}"

-          ref="${GITHUB_REF}"
-          branch=${{ needs.group_targets.outputs.branchname  }}
-          location="$branch"
-
-          if [[ "$branch" == "main" ]]; then
-            location="master"
-          fi
-
-          if [[ "$ref" == refs/tags/v[0-9]* ]]; then
-            tag="${ref#refs/tags/}"
-            location="$tag"
-          fi
-
-          echo "uploadlocation=$location" >> $GITHUB_OUTPUT
-
-      - name: Uploading Artifacts to S3 [${{ steps.upload-location.outputs.uploadlocation }}]
+      - name: Uploading Artifacts to S3 [${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}]
        uses: jakejarvis/s3-sync-action@master
        with:
          args: --acl public-read
@@ -213,30 +149,25 @@ jobs:
          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          AWS_REGION: 'us-west-1'
          SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/${{ steps.upload-location.outputs.uploadlocation }}/
+          DEST_DIR: Firmware/${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}/

-      # if we are uploading artifacts to a versioned folder
-      # we should also update the stable folder in the s3 bucket
-      - name: Uploading Artifacts to S3 [stable]
-        uses: jakejarvis/s3-sync-action@master
-        if: startsWith(github.ref, 'refs/tags/v')
+  release:
+    name: Create Release and Upload Artifacts
+    permissions:
+      contents: write
+    # runs-on: ubuntu-latest
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    needs: [setup, group_targets]
+    if: startsWith(github.ref, 'refs/tags/')
+    steps:
+      - name: Download Artifacts
+        uses: actions/download-artifact@v4
        with:
-          args: --acl public-read
-        env:
-          AWS_S3_BUCKET: 'px4-travis'
-          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-          AWS_REGION: 'us-west-1'
-          SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/stable/
+          path: artifacts/
+          merge-multiple: true

-      # if build is a release triggered by a versioned tag then create a github release
-      # and upload the build artifacts. A draft release is created so that the release
-      # can be reviewed before publishing
-      - name: Upload Artifacts to GitHub Release
+      - name: Upload Binaries to Release
        uses: softprops/action-gh-release@v2
-        if: startsWith(github.ref, 'refs/tags/v')
        with:
          draft: true
          files: artifacts/*.px4
-          name: ${{ steps.upload-location.outputs.uploadlocation }}
@@ -29,7 +29,7 @@ jobs:
      fail-fast: false
      matrix:
        version: ['ubuntu:22.04', 'ubuntu:24.04']
-    runs-on: [runs-on,runner=4cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
    container:
      image: ${{ matrix.version }}
      volumes:
@@ -39,7 +39,7 @@ jobs:
    name: Set Tags and Variables
    permissions:
      contents: read
-    runs-on: [runs-on,"runner=1cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
+    runs-on: [runs-on,"runner=1cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
    outputs:
      px4_version: ${{ steps.px4_version.outputs.px4_version }}
      meta_tags: ${{ steps.meta.outputs.tags }}
@@ -87,7 +87,7 @@ jobs:
          - platform: linux/amd64
            arch: amd64
            runner: x64
-    runs-on: [runs-on,"runner=4cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
+    runs-on: [runs-on,"runner=8cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
    steps:
      - uses: runs-on/action@v1
      - uses: actions/checkout@v4
@@ -130,15 +130,15 @@ jobs:
          load: false
          push: ${{ startsWith(github.ref, 'refs/tags/') || (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_registry) }}
          provenance: false
-          cache-from: type=gha,version=1,scope=${{ matrix.arch }}
-          cache-to: type=gha,version=1,mode=max,scope=${{ matrix.arch }}
+          cache-from: type=gha,version=1
+          cache-to: type=gha,version=1,mode=max

  deploy:
    name: Deploy To Registry
    permissions:
      contents: read
      packages: write
-    runs-on: [runs-on,"runner=4cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
+    runs-on: [runs-on,"runner=8cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
    needs: [build, setup]
    if: ${{ startsWith(github.ref, 'refs/tags/') || (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_registry) }}
    steps:
@@ -1,6 +1,23 @@
-name: Docs - Deploy PX4 User Guide to Github pages (Manual)
+name: Docs - Deploy PX4 User Guide

 on:
+  push:
+    branches:
+      - 'main'
+      - 'release/**'
+    paths:
+      - 'docs/en/**'
+      - 'docs/uk/**'
+      - 'docs/zh/**'
+  pull_request:
+    branches:
+      - '**'
+    paths:
+      - 'docs/en/**'
+      - 'docs/uk/**'
+      - 'docs/zh/**'
+
+  # Allows you to run this workflow manually from the Actions tab
  workflow_dispatch:

 # Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
@@ -20,7 +37,7 @@ env:

 jobs:
  build:
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
    steps:
      - uses: runs-on/action@v1
      - name: Checkout
@@ -55,7 +72,7 @@ jobs:
  deploy:
    if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
    needs: build
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]

    steps:
      - name: Download Artifact
@@ -7,52 +7,42 @@ on:
      - "release/**"
    paths:
      - "docs/en/**"
-      - "docs/zh/**"
-      - "docs/uk/**"
-      - "docs/ko/**"
  pull_request:
+    branches:
+      - "**"
    paths:
      - "docs/en/**"
-      - "docs/zh/**"
-      - "docs/uk/**"
-      - "docs/ko/**"

  workflow_dispatch:

 permissions:
  contents: read
-  actions: read
  id-token: write # for AWS OIDC

 concurrency:
  group: docs-deploy
  cancel-in-progress: false

+env:
+  BRANCH_NAME: ${{ github.head_ref || github.ref_name }}
+
 jobs:
  build:
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
-    outputs:
-      branchname: ${{ steps.set-branch.outputs.branchname }}
-      releaseversion: ${{ steps.set-version.outputs.releaseversion }}
+    runs-on:
+      [
+        runs-on,
+        runner=8cpu-linux-x64,
+        image=ubuntu24-full-x64,
+        "run-id=${{ github.run_id }}",
+        spot=false,
+        extras=s3-cache,
+      ]
    steps:
      - uses: runs-on/action@v1

      - name: Checkout
        uses: actions/checkout@v4

-      - id: set-branch
-        run: echo "branchname=${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}" >> $GITHUB_OUTPUT
-
-      - id: set-version
-        run: |
-          branch="${{ steps.set-branch.outputs.branchname }}"
-          if [[ "$branch" == "main" ]]; then
-            version="main"
-          else
-            version="v${branch#release/}"
-          fi
-          echo "releaseversion=$version" >> $GITHUB_OUTPUT
-
      - name: Setup Node
        uses: actions/setup-node@v4
        with:
@@ -65,8 +55,6 @@ jobs:

      - name: Build with VitePress
        working-directory: ./docs
-        env:
-          BRANCH_NAME: ${{ steps.set-version.outputs.releaseversion }}
        run: |
          npm run docs:build_ubuntu
          touch .vitepress/dist/.nojekyll
@@ -103,14 +91,14 @@ jobs:

      - name: Upload HTML with short cache
        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
+          aws s3 sync ~/_book/ s3://px4-docs/${{ env.BRANCH_NAME }}/ \
            --delete \
            --exclude "*" --include "*.html" \
            --cache-control "public, max-age=60"

      - name: Upload assets with long cache
        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
+          aws s3 sync ~/_book/ s3://px4-docs/${{ env.BRANCH_NAME }}/ \
            --delete \
            --exclude "*.html" \
            --cache-control "public, max-age=86400, immutable"
@@ -0,0 +1,34 @@
+name: Dump OIDC sub claim
+
+on:
+  push:
+    branches:
+      - main
+      - 'release/**'   # run this on release branches too
+  pull_request:
+    branches:
+      - '**'
+  workflow_dispatch:   # allow manual trigger
+
+jobs:
+  show-oidc-claim:
+    runs-on: ubuntu-latest
+    permissions:
+      id-token: write   # needed to fetch the OIDC token
+      contents: read
+    steps:
+      - name: Dump OIDC sub claim
+        run: |
+          url="${ACTIONS_ID_TOKEN_REQUEST_URL}?audience=sts.amazonaws.com"
+          jwt="$(curl -s -H "Authorization: Bearer $ACTIONS_ID_TOKEN_REQUEST_TOKEN" "$url" | jq -r .value)"
+          body="$(echo "$jwt" | cut -d. -f2 | tr '_-' '/+' | base64 -d 2>/dev/null || true)"
+          echo "OIDC sub: $(echo "$body" | jq -r .sub)"
+
+      - name: Configure AWS from OIDC
+        uses: aws-actions/configure-aws-credentials@v4
+        with:
+          role-to-assume: ${{ secrets.AWS_ROLE_ARN }}
+          aws-region: us-west-2
+
+      - name: Sanity check AWS credentials
+        run: aws sts get-caller-identity
@@ -48,7 +48,6 @@ jobs:
        run: |
          git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
          cd _emscripten_sdk
-          git checkout 4.0.15
          ./emsdk install latest
          ./emsdk activate latest

@@ -24,7 +24,7 @@ env:
 jobs:
  analyze_flash:
    name: Analyzing ${{ matrix.target }}
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
    strategy:
@@ -97,7 +97,7 @@ jobs:
  # Track this issue https://github.com/PX4/PX4-Autopilot/issues/24408
  post_pr_comment:
    name: Publish Results
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    needs: [analyze_flash]
    env:
      V5X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-absolute) }}
@@ -22,7 +22,7 @@ concurrency:
 jobs:
  check_itcm:
    name: Checking ${{ matrix.target }}
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
    strategy:
@@ -41,10 +41,6 @@ jobs:
            scripts: >
              boards/nxp/tropic-community/nuttx-config/scripts/itcm_functions_includes.ld
              boards/nxp/tropic-community/nuttx-config/scripts/itcm_static_functions.ld
-          - target: nxp_mr-tropic
-            scripts: >
-              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_functions_includes.ld
-              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_static_functions.ld
    steps:
      - uses: actions/checkout@v4
        with:
@@ -23,7 +23,7 @@ concurrency:

 jobs:
  build:
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev-ros2-galactic:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
@@ -21,7 +21,7 @@ concurrency:
 jobs:
  build_and_test:
    name: Build and test
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    strategy:
      fail-fast: false
      matrix:
@@ -24,7 +24,7 @@ concurrency:
 jobs:
  build:
    name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev-simulation-focal:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
@@ -141,11 +141,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-flow_canbootloader
-    ark_can-flow-mr_default:
-      short: ark_can-flow-mr_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_can-flow-mr_default
    ark_can-flow-mr_canbootloader:
      short: ark_can-flow-mr_canbootloader
      buildType: MinSizeRel
@@ -241,16 +236,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_fpv_default
-    ark_mag_canbootloader:
-      short: ark_mag_canbootloader
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: ark_mag_canbootloader
-    ark_mag_default:
-      short: ark_mag_default
-      buildType: MiniSizeRel
-      settings:
-        CONFIG: ark_mag_default
    ark_pi6x_bootloader:
      short: ark_pi6x_bootloader
      buildType: MinSizeRel
@@ -421,16 +406,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: micoair_h743-v2_default
-    micoair_h743-lite_bootloader:
-      short: micoair_h743-lite_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-lite_bootloader
-    micoair_h743-lite_default:
-      short: micoair_h743-lite
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743-lite_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -481,16 +456,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: nxp_mr-canhubk3_fmu
-    nxp_mr-tropic_default:
-      short: nxp_mr-tropic_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-tropic_default
-    nxp_mr-tropic_bootloader:
-      short: nxp_mr-tropic_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: nxp_mr-tropic_bootloader
    nxp_tropic-community_default:
      short: nxp_tropic-community_default
      buildType: MinSizeRel
@@ -521,13 +486,3 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: x-mav_ap-h743v2_default
-    svehicle_e2_bootloader:
-      short: svehicle_e2_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: svehicle_e2_bootloader
-    svehicle_e2_default:
-      short: svehicle_e2
-      buildType: MinSizeRel
-      settings:
-        CONFIG: svehicle_e2_default
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2012 - 2025, PX4 Development Team
+Copyright (c) 2012 - 2023, PX4 Development Team
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -325,8 +325,6 @@ bootloaders_update: \
 	ark_fmu-v6x_bootloader \
 	ark_fpv_bootloader \
 	ark_pi6x_bootloader \
-	auterion_fmu-v6s_bootloader \
-	auterion_fmu-v6x_bootloader \
 	cuav_nora_bootloader \
 	cuav_x7pro_bootloader \
 	cuav_7-nano_bootloader \
@@ -346,7 +344,6 @@ bootloaders_update: \
        micoair_h743_bootloader \
        micoair_h743-aio_bootloader \
 	micoair_h743-v2_bootloader \
-	micoair_h743-lite_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \
@@ -85,32 +85,10 @@ endif()
 if(PX4_ETHERNET)
 	set(added_arguments ${added_arguments} --ethernet)
 endif()
-# Check if board has an rc.board_airframes file to filter airframes
-set(board_airframes_file "${PX4_BOARD_DIR}/init/rc.board_airframes")
-set(airframes_whitelist "")
-if(EXISTS "${board_airframes_file}")
-	message(STATUS "ROMFS: Using board-specific airframes list: ${board_airframes_file}")
-	file(STRINGS "${board_airframes_file}" airframes_whitelist)
-	# Remove comments and empty lines
-	list(FILTER airframes_whitelist EXCLUDE REGEX "^[ \t]*#")
-	list(FILTER airframes_whitelist EXCLUDE REGEX "^[ \t]*$")
-endif()
-
 # create list of relative romfs file names
 set(romfs_copy_files_relative)
 foreach(romfs_file IN LISTS romfs_copy_files)
 	string(REPLACE "${romfs_src_dir}/" "" romfs_file_rel ${romfs_file})
-
-	# If we have an airframes whitelist, filter airframe files
-	if(airframes_whitelist AND romfs_file_rel MATCHES "^init.d/airframes/")
-		# Extract just the filename
-		get_filename_component(airframe_name "${romfs_file_rel}" NAME)
-		# Check if it's in the whitelist
-		if(NOT "${airframe_name}" IN_LIST airframes_whitelist)
-			continue()
-		endif()
-	endif()
-
 	list(APPEND romfs_copy_files_relative ${romfs_file_rel})
 endforeach()
 # copy the ROMFS files by creating a tar and extracting it to the build
@@ -27,6 +27,7 @@ param set-default SIH_KDV 0.2
 param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
 param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

+param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -44,6 +44,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -46,6 +46,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -46,6 +46,8 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -31,6 +31,8 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -31,6 +31,8 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -30,6 +30,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -31,6 +31,8 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -38,6 +38,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -44,6 +44,8 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -35,6 +35,8 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -35,6 +35,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -46,6 +46,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -43,6 +43,8 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -48,6 +48,8 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -53,6 +53,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default COM_PREARM_MODE 2

 param set-default CA_ROTOR_COUNT 1
@@ -48,6 +48,8 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1

 param set-default CA_SV_CS_COUNT 6
@@ -1,5 +1,5 @@
 #!/bin/sh
-# @name Generic Ackermann Rover
+# @name Rover Ackermann
 # @type Rover
 # @class Rover

@@ -14,32 +14,30 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default NAV_ACC_RAD 0.5

 # Ackermann Parameters
-param set-default RA_WHEEL_BASE 0.5
+param set-default RA_WHEEL_BASE 0.321
 param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 1.5
+param set-default RA_ACC_RAD_MAX 3
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_STR_RATE_LIM 360

-# Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.01
-param set-default RO_YAW_RATE_P 0.25
-param set-default RO_YAW_RATE_LIM 130
-param set-default RO_YAW_ACCEL_LIM 800
-param set-default RO_YAW_DECEL_LIM 800
-param set-default RO_YAW_RATE_CORR 1
-param set-default RO_YAW_EXPO 0.85
-param set-default RO_YAW_SUPEXPO 0.3
+# Rover Control Parameters
+param set-default RO_ACCEL_LIM 3
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 15
+param set-default RO_MAX_THR_SPEED 3.1

-# Attitude Control Parameters
+# Rover Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.1
+param set-default RO_YAW_RATE_P 1
+param set-default RO_YAW_RATE_LIM 180
+param set-default RO_YAW_RATE_CORR 1
+
+# Rover Attitude Control Parameters
 param set-default RO_YAW_P 3

-# Velocity Control Parameters
-param set-default RO_ACCEL_LIM 4
-param set-default RO_DECEL_LIM 6
-param set-default RO_JERK_LIM 10
-param set-default RO_MAX_THR_SPEED 3.1
-param set-default RO_SPEED_LIM 2.5
-param set-default RO_SPEED_I 0.01
+# Rover Velocity Control Parameters
+param set-default RO_SPEED_LIM 3
+param set-default RO_SPEED_I 0.1
 param set-default RO_SPEED_P 1
 param set-default RO_SPEED_RED 1

@@ -50,8 +48,8 @@ param set-default PP_LOOKAHD_MIN 1

 # Wheels
 param set-default SIM_GZ_WH_FUNC1 101
-param set-default SIM_GZ_WH_MIN1 70
-param set-default SIM_GZ_WH_MAX1 130
+param set-default SIM_GZ_WH_MIN1 0
+param set-default SIM_GZ_WH_MAX1 200
 param set-default SIM_GZ_WH_DIS1 100

 # Steering
@@ -1,5 +1,5 @@
 #!/bin/sh
-# @name Generic Mecanum Rover
+# @name Aion Robotics R1 Rover
 # @type Rover
 # @class Rover

@@ -7,15 +7,14 @@

 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
 PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_mecanum}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover_mecanum}

 param set-default SIM_GZ_EN 1 # Gazebo bridge

 param set-default NAV_ACC_RAD 0.5

 # Mecanum Parameters
-param set-default RM_WHEEL_TRACK 0.6
-param set-default RM_YAW_STK_GAIN 0.6
+param set-default RM_WHEEL_TRACK 0.3

 # Rover Control Parameters
 param set-default RO_ACCEL_LIM 3
@@ -30,21 +29,15 @@ param set-default RO_YAW_RATE_LIM 120
 param set-default RO_YAW_ACCEL_LIM 240
 param set-default RO_YAW_DECEL_LIM 1000
 param set-default RO_YAW_RATE_CORR 1.75
-param set-default RO_YAW_EXPO 0.85
-param set-default RO_YAW_SUPEXPO 0.3

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5

-# Velocity Control Parameters
-param set-default RO_ACCEL_LIM 4
-param set-default RO_DECEL_LIM 6
-param set-default RO_JERK_LIM 10
-param set-default RO_MAX_THR_SPEED 3.1
-param set-default RO_SPEED_LIM 2.5
-param set-default RO_SPEED_I 0.01
-param set-default RO_SPEED_P 0.1
-param set-default RO_SPEED_RED 0.5
+# Rover Velocity Control Parameters
+param set-default RO_SPEED_LIM 2
+param set-default RO_SPEED_I 0.5
+param set-default RO_SPEED_P 1
+param set-default RO_SPEED_RED 1

 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 0.5
@@ -55,24 +48,24 @@ param set-default PP_LOOKAHD_MIN 1
 param set-default SENS_EN_MAGSIM 1

 # Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 104 # left wheel back
+param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
 param set-default SIM_GZ_WH_MIN1 70
 param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100

-param set-default SIM_GZ_WH_FUNC2 103 # right wheel back
+param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
 param set-default SIM_GZ_WH_MIN2 70
 param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100

-param set-default SIM_GZ_WH_FUNC3 102 # left wheel front
+param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
 param set-default SIM_GZ_WH_MIN3 70
 param set-default SIM_GZ_WH_MAX3 130
 param set-default SIM_GZ_WH_DIS3 100

-param set-default SIM_GZ_WH_FUNC4 101 # right wheel front
+param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
 param set-default SIM_GZ_WH_MIN4 70
 param set-default SIM_GZ_WH_MAX4 130
 param set-default SIM_GZ_WH_DIS4 100

-param set-default SIM_GZ_WH_REV 0
+param set-default SIM_GZ_WH_REV 10
@@ -17,7 +17,6 @@ param set-default NAV_ACC_RAD 0.5
 param set-default RD_WHEEL_TRACK 0.6
 param set-default RD_TRANS_DRV_TRN 0.785398
 param set-default RD_TRANS_TRN_DRV 0.174533
-param set-default RD_YAW_STK_GAIN 0.6

 # Rate Control Parameters
 param set-default RO_YAW_RATE_I 0.01
@@ -26,8 +25,6 @@ param set-default RO_YAW_RATE_LIM 250
 param set-default RO_YAW_ACCEL_LIM 400
 param set-default RO_YAW_DECEL_LIM 800
 param set-default RO_YAW_RATE_CORR 1
-param set-default RO_YAW_EXPO 0.85
-param set-default RO_YAW_SUPEXPO 0.3

 # Attitude Control Parameters
 param set-default RO_YAW_P 5
@@ -26,6 +26,7 @@ param set-default TRIG_INTERFACE 3
 param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
+param set-default MAV_PROTO_VER 2

 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6
@@ -80,8 +80,10 @@ px4_add_romfs_files(
 	4009_gz_r1_rover
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
+	4012_gz_rover_ackermann
 	4013_gz_x500_lidar_2d
 	4014_gz_x500_mono_cam_down
+	4015_gz_r1_rover_mecanum
 	4016_gz_x500_lidar_down
 	4017_gz_x500_lidar_front
 	4018_gz_quadtailsitter
@@ -112,8 +114,6 @@ px4_add_romfs_files(
 	17002_flightgear_tf-g2

 	50000_gz_rover_differential
-	51000_gz_rover_ackermann
-	52000_gz_rover_mecanum

 	60002_gz_uuv_bluerov2_heavy

@@ -173,6 +173,7 @@ param set-default COM_RC_IN_MODE 1
 param set-default EKF2_REQ_GPS_H 0.5

 param set-default IMU_GYRO_FFT_EN 1
+param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets

 param set-default -s MC_AT_EN 1

@@ -14,6 +14,7 @@

 param set UAVCAN_ENABLE 0

+param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -40,6 +40,8 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -37,6 +37,8 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3

@@ -10,6 +10,7 @@

 . ${R}etc/init.d/rc.fw_defaults

+param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 param set-default CA_SV_CS_COUNT 4
@@ -32,6 +32,7 @@ param set-default FW_WR_IMAX 0.8
 param set-default FW_WR_P 1
 param set-default FW_W_RMAX 0

+param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 7
 param set-default CA_SV_CS0_TRQ_R -0.5
@@ -10,6 +10,8 @@

 . ${R}etc/init.d/rc.fw_defaults

+param set-default CA_AIRFRAME 1
+
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_SV_CS_COUNT 2
@@ -7,10 +7,6 @@
 #
 # @board px4_fmu-v2 exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6s exclude
-# @board ark_fmu-v6x exclude
-# @board auterion_fmu-v6x exclude
-# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 #
 # @maintainer Iain Galloway <iain.galloway@nxp.com>
@@ -7,7 +7,6 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
-# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 #

@@ -13,11 +13,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6s exclude
-# @board ark_fmu-v6x exclude
-# @board auterion_fmu-v6x exclude
-# @board px4_fmu-v6x exclude
-# @board px4_fmu-v6xrt exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -10,7 +10,6 @@
 # @board cuav_x7pro exclude
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 #

@@ -12,7 +12,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
@@ -10,7 +10,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
@@ -14,7 +14,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board diatone_mamba-f405-mk2 exclude
@@ -13,7 +13,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board diatone_mamba-f405-mk2 exclude
 #
@@ -1,31 +0,0 @@
-#!/bin/sh
-#
-# @name NXP B3RB Rover Ackermann
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_ackermann_defaults
-
-param set-default BAT1_N_CELLS 3
-
-# Set geometry & output configration
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC3 101
-param set-default PWM_MAIN_DIS1 1500
-param set-default PWM_MAIN_DIS2 0
-param set-default PWM_MAIN_DIS3 1500
-param set-default PWM_MAIN_MIN1 1000
-param set-default PWM_MAIN_MIN2 2500
-param set-default PWM_MAIN_MIN3 0
-param set-default PWM_MAIN_MAX1 2000
-param set-default PWM_MAIN_MAX2 2500
-param set-default PWM_MAIN_MAX3 50
-param set-default PWM_MAIN_TIM0 400
-param set-default PWM_MAIN_TIM1 400
-param set-default PWM_MAIN_TIM2 20000
@@ -153,7 +153,6 @@ if(CONFIG_MODULES_ROVER_ACKERMANN)
 		# [51000, 51999] Ackermann rovers
 		51000_generic_rover_ackermann
 		51001_axial_scx10_2_trail_honcho
-		51002_nxp_b3rb
 	)
 endif()

@@ -10,8 +10,6 @@ set VEHICLE_TYPE fw
 # MAV_TYPE_FIXED_WING 1
 param set-default MAV_TYPE 1

-param set-default CA_AIRFRAME 1
-
 #
 # Default parameters for fixed wing UAVs.
 #
@@ -28,7 +26,6 @@ param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_REQ_EPH 10
 param set-default EKF2_REQ_EPV 10
 param set-default EKF2_REQ_HDRIFT 0.5
-param set-default EKF2_REQ_PDOP 4
 param set-default EKF2_REQ_SACC 1
 param set-default EKF2_REQ_VDRIFT 1
 param set-default EKF2_RNG_QLTY_T 3
@@ -154,12 +154,6 @@ then
 	fi
 fi

-# Microchip MCP9808 temperature sensor external I2C
-if param compare -s SENS_EN_MCP9808 1
-then
-	mcp9808 start -X
-fi
-
 # TE MS4515 differential pressure sensor external I2C
 if param compare -s SENS_EN_MS4515 1
 then
@@ -225,12 +219,6 @@ then
 	pcf8583 start -X -a 0x51
 fi

-# ADC sensor ADS7953 external SPI
-if param compare -s ADC_ADS7953_EN 1
-then
-	ads7953 start -S
-fi
-
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then
@@ -228,26 +228,30 @@ else
 	fi
 	unset BOARD_RC_ADDITIONAL_INIT

-	# Load airframe configuration based on SYS_AUTOSTART parameter if successful VEHICLE_TYPE gets set
-	# Run autogenerated ROMFS airframe script
-	. ${R}etc/init.d/rc.autostart
-
-	if [ ${VEHICLE_TYPE} = none ]
+	# Load airframe configuration based on SYS_AUTOSTART parameter
+	if ! param compare SYS_AUTOSTART 0
 	then
-		# Run external airframe script on SD card
-		if [ $STORAGE_AVAILABLE = yes ]
+		# rc.autostart directly run the right airframe script which sets the VEHICLE_TYPE
+		# Look for airframe in ROMFS
+		. ${R}etc/init.d/rc.autostart
+
+		if [ ${VEHICLE_TYPE} = none ]
 		then
-			. ${R}etc/init.d/rc.autostart_ext
-		else
-			echo "ERROR [init] SD not mounted, skipping external airframe"
+			# Use external startup file
+			if [ $STORAGE_AVAILABLE = yes ]
+			then
+				. ${R}etc/init.d/rc.autostart_ext
+			else
+				echo "ERROR [init] SD card not mounted - can't load external airframe"
+			fi
 		fi
-	fi

-	if [ ${VEHICLE_TYPE} = none ]
-	then
-		echo "ERROR [init] No airframe file found for SYS_AUTOSTART value"
-		param set SYS_AUTOSTART 0
-		tune_control play error
+		if [ ${VEHICLE_TYPE} = none ]
+		then
+			echo "ERROR [init] No airframe file found for SYS_AUTOSTART value"
+			param set SYS_AUTOSTART 0
+			tune_control play error
+		fi
 	fi

 	# Check parameter version and reset upon airframe configuration version mismatch.
@@ -15,4 +15,4 @@ ignore-exclude-errors-x
 lineend=linux
 exclude=EASTL
 add-brackets
-max-code-length=140
+max-code-length=120
@@ -7,7 +7,6 @@ fi

 ssh_port=22
 ssh_user=root
-ssh_opts="-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no"

 while getopts ":f:c:d:p:u:r" opt; do
 	case ${opt} in
@@ -68,7 +67,7 @@ target_file_name="update-dev.tar"
 if [ "$revert" == true ]; then
 	# revert to the release version which was originally deployed
 	cmd="cp $target_dir/update.tar $target_dir/$target_file_name"
-	ssh $ssh_opts -t -p $ssh_port $ssh_user@$device "$cmd"
+	ssh -t -p $ssh_port $ssh_user@$device "$cmd"
 else
 	# create custom update-dev.tar
 	tmp_dir="$(mktemp -d)"
@@ -106,11 +105,11 @@ else
 	$tar_name -C "$tmp_dir" --sort=name --owner=root:0 --group=root:0 --mtime='2019-01-01 00:00:00' -cvf $target_file_name $firmware_path $config_path

 	# send it to the target to start flashing
-	scp $ssh_opts -P $ssh_port "$target_file_name" $ssh_user@"$device":$target_dir
+	scp -P $ssh_port "$target_file_name" $ssh_user@"$device":$target_dir
 	popd &>/dev/null
 	rm -rf "$tmp_dir"
 fi

 # grab status output for flashing progress
 cmd="tail --follow=name $target_dir/update_status 2>/dev/null || true"
-ssh $ssh_opts -t -p $ssh_port $ssh_user@$device "$cmd"
+ssh -t -p $ssh_port $ssh_user@$device "$cmd"
@@ -15,7 +15,7 @@ class ModuleDocumentation(object):
    # TOC in https://github.com/PX4/PX4-Autopilot/blob/main/docs/en/SUMMARY.md
    valid_categories = ['driver', 'estimator', 'controller', 'system',
                        'communication', 'command', 'template', 'simulation', 'autotune']
-    valid_subcategories = ['', 'adc', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
+    valid_subcategories = ['', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
                           'magnetometer', 'baro', 'optical_flow', 'radio_control','rpm_sensor', 'transponder']

    max_line_length = 80 # wrap lines that are longer than this
@@ -6,7 +6,6 @@ future
 jinja2>=2.8
 jsonschema
 kconfiglib
-lark
 lxml
 matplotlib>=3.0
 numpy>=1.13
@@ -15,8 +14,8 @@ packaging
 pandas>=0.21
 pkgconfig
 psutil
-pycryptodome
 pygments
+wheel>=0.31.1
 pymavlink
 pyros-genmsg
 pyserial
@@ -25,6 +24,7 @@ pyyaml
 requests
 setuptools>=39.2.0
 six>=1.12.0
-sympy>=1.10.1
 toml>=0.9
-wheel>=0.31.1
+sympy>=1.10.1
+pycryptodome
+lark
@@ -25,6 +25,10 @@ except ImportError as e:
    sys.exit(1)


+SERVER = 'https://logs.px4.io'
+#SERVER = 'http://localhost:5006' # for testing locally
+UPLOAD_URL = SERVER+'/upload'
+
 quiet = False

 def ask_value(text, default=None):
@@ -56,8 +60,6 @@ def main():
    parser = ArgumentParser(description=__doc__)
    parser.add_argument('--quiet', '-q', dest='quiet', action='store_true', default=False,
            help='Quiet mode: do not ask for values which were not provided as parameters')
-    parser.add_argument('--server', dest='server', type=str, default='https://logs.px4.io',
-                      help='Server URL (default: https://logs.px4.io), use http://localhost:5006 for testing locally')
    parser.add_argument("--description", dest="description", type=str,
                      help="Log description", default=None)
    parser.add_argument("--feedback", dest="feedback", type=str,
@@ -97,9 +99,6 @@ def main():
    else:
        email = args.email

-    server = args.server
-    upload_url = server + '/upload'
-
    payload = {'type': args.type, 'description': description,
               'feedback': feedback, 'email': email, 'source': args.source}

@@ -114,13 +113,13 @@ def main():
            print('Uploading '+file_name+'...')

        with open(file_name, 'rb') as f:
-            r = requests.post(upload_url, data=payload, files={'filearg': f},
+            r = requests.post(UPLOAD_URL, data=payload, files={'filearg': f},
                    allow_redirects=False)
            if r.status_code == 302: # redirect
                if 'Location'  in r.headers:
                    plot_url = r.headers['Location']
                    if len(plot_url) > 0 and plot_url[0] == '/':
-                        plot_url = server + plot_url
+                        plot_url = SERVER + plot_url
                    print('URL: '+plot_url)


@@ -1,30 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m4"
-CONFIG_BOARD_ROMFSROOT="cannode"
-CONFIG_BOARD_CONSTRAINED_FLASH=y
-CONFIG_BOARD_NO_HELP=y
-CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_DRIVERS_BOOTLOADERS=y
-CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
-CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
-CONFIG_DRIVERS_OPTICAL_FLOW_PAA3905=y
-CONFIG_BOARD_UAVCAN_INTERFACES=1
-CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_UAVCANNODE_FLOW_MEASUREMENT=y
-CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT=y
-CONFIG_UAVCANNODE_RAW_IMU=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_SENSORS=y
-# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
-# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
-# CONFIG_SENSORS_VEHICLE_ACCELERATION is not set
-# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
-# CONFIG_SENSORS_VEHICLE_MAGNETOMETER is not set
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -8,8 +8,9 @@ param set-default SENS_FLOW_RATE 150
 param set-default SENS_IMU_CLPNOTI 0

 param set-default SENS_AFBR_S_RATE 25
-param set-default SENS_AFBR_L_RATE 5
-param set-default SENS_AFBR_MODE 1
+param set-default SENS_AFBR_L_RATE 10
+param set-default SENS_AFBR_THRESH 8
+param set-default SENS_AFBR_HYSTER 2

 # Internal SPI
 paa3905 -s start -Y 180
@@ -11,6 +11,7 @@ param set-default SENS_AFBR_HYSTER 1

 param set-default MAV_SYS_ID 158
 param set-default MAV_COMP_ID 158
+param set-default MAV_PROTO_VER 2

 param set-default MAV_0_MODE 14
 param set-default MAV_0_FORWARD 0
@@ -19,7 +19,6 @@ CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_AUAV=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# ARK FMU V6X specific board sensors init
+# ARK FMUARKV6X specific board sensors init
 #------------------------------------------------------------------------------
 set HAVE_PM2 yes
 set HAVE_PM3 yes
@@ -69,25 +69,28 @@ fi

 if ver hwtypecmp ARKV6X000
 then
-	# Internal SPI bus IIM42652
-	iim42652 -R 3 -s -b 1 start
+	# Internal SPI bus IIM42652 with SPIX measured frequency of 32.051kHz
+	iim42652 -R 3 -s -b 1 -C 32051 start

-	# Internal SPI bus ICM42688p
-	icm42688p -R 9 -s -b 2 start
+	# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
+	icm42688p -R 9 -s -b 2 -C 32051 start

-	# Internal SPI bus ICM42688p
-	icm42688p -R 6 -s -b 3 start
+	# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
+	icm42688p -R 6 -s -b 3 -C 32051 start
 fi

 if ver hwtypecmp ARKV6X001
 then
-	# Internal SPI bus IIM42653
+	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
+	#iim42653 -R 3 -s -b 1 -C 32051 start
 	iim42653 -R 3 -s -b 1 start

-	# Internal SPI bus IIM42653
+	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
+	#iim42653 -R 9 -s -b 2 -C 32051 start
 	iim42653 -R 9 -s -b 2 start

-	# Internal SPI bus IIM42653
+	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
+	#iim42653 -R 6 -s -b 3 -C 32051 start
 	iim42653 -R 6 -s -b 3 start
 fi

@@ -57,6 +57,8 @@ else()
 		mtd.cpp
 		sdio.c
 		spi.cpp
+		spix_sync.c
+		spix_sync.h
 		timer_config.cpp
 		usb.c
 	)
@@ -241,7 +241,7 @@

 /* PWM
 */
-#define DIRECT_PWM_OUTPUT_CHANNELS   9
+#define DIRECT_PWM_OUTPUT_CHANNELS   8

 #define GPIO_FMU_CH1                    /* PI0  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN0)
 #define GPIO_FMU_CH2                    /* PH12 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTH|GPIO_PIN12)
@@ -482,7 +482,7 @@
 #define PX4_I2C_BUS_MTD      4,5


-#define BOARD_NUM_IO_TIMERS  4
+#define BOARD_NUM_IO_TIMERS  3
 #define BOARD_SPIX_SYNC_FREQ 32000

 __BEGIN_DECLS
@@ -46,6 +46,7 @@
 ****************************************************************************/

 #include "board_config.h"
+#include "spix_sync.h"

 #include <stdbool.h>
 #include <stdio.h>
@@ -289,5 +290,9 @@ __EXPORT int board_app_initialize(uintptr_t arg)

 #endif /* CONFIG_MMCSD */

+	/* Configure the SPIX_SYNC output */
+	spix_sync_servo_init(BOARD_SPIX_SYNC_FREQ);
+	spix_sync_servo_set(0, 150);
+
 	return OK;
 }
@@ -0,0 +1,309 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2023 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Airmind nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+* @file spix_sync.c
+*
+*
+*/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <board_config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <ctype.h>
+
+
+#include <perf/perf_counter.h>
+#include <systemlib/err.h>
+#include <systemlib/px4_macros.h>
+
+#include <px4_arch/io_timer.h>
+
+#include "spix_sync.h"
+
+#define REG(_tmr, _reg) (*(volatile uint32_t *)(spix_sync_timers[_tmr].base + _reg))
+
+#define rCR1(_tmr)      REG(_tmr, STM32_GTIM_CR1_OFFSET)
+#define rCR2(_tmr)      REG(_tmr, STM32_GTIM_CR2_OFFSET)
+#define rSMCR(_tmr)     REG(_tmr, STM32_GTIM_SMCR_OFFSET)
+#define rDIER(_tmr)     REG(_tmr, STM32_GTIM_DIER_OFFSET)
+#define rSR(_tmr)       REG(_tmr, STM32_GTIM_SR_OFFSET)
+#define rEGR(_tmr)      REG(_tmr, STM32_GTIM_EGR_OFFSET)
+#define rCCMR1(_tmr)    REG(_tmr, STM32_GTIM_CCMR1_OFFSET)
+#define rCCMR2(_tmr)    REG(_tmr, STM32_GTIM_CCMR2_OFFSET)
+#define rCCER(_tmr)     REG(_tmr, STM32_GTIM_CCER_OFFSET)
+#define rCNT(_tmr)      REG(_tmr, STM32_GTIM_CNT_OFFSET)
+#define rPSC(_tmr)      REG(_tmr, STM32_GTIM_PSC_OFFSET)
+#define rARR(_tmr)      REG(_tmr, STM32_GTIM_ARR_OFFSET)
+#define rCCR1(_tmr)     REG(_tmr, STM32_GTIM_CCR1_OFFSET)
+#define rCCR2(_tmr)     REG(_tmr, STM32_GTIM_CCR2_OFFSET)
+#define rCCR3(_tmr)     REG(_tmr, STM32_GTIM_CCR3_OFFSET)
+#define rCCR4(_tmr)     REG(_tmr, STM32_GTIM_CCR4_OFFSET)
+#define rDCR(_tmr)      REG(_tmr, STM32_GTIM_DCR_OFFSET)
+#define rDMAR(_tmr)     REG(_tmr, STM32_GTIM_DMAR_OFFSET)
+#define rBDTR(_tmr)     REG(_tmr, STM32_ATIM_BDTR_OFFSET)
+
+#define BOARD_SPIX_SYNC_PWM_FREQ 1024000
+
+unsigned
+spix_sync_timer_get_period(unsigned timer)
+{
+	return (rARR(timer));
+}
+
+static void spix_sync_timer_init_timer(unsigned timer, unsigned rate)
+{
+	if (spix_sync_timers[timer].base) {
+
+		irqstate_t flags = px4_enter_critical_section();
+
+		/* enable the timer clock before we try to talk to it */
+
+		modifyreg32(spix_sync_timers[timer].clock_register, 0, spix_sync_timers[timer].clock_bit);
+
+		/* disable and configure the timer */
+		rCR1(timer) = 0;
+		rCR2(timer) = 0;
+		rSMCR(timer) = 0;
+		rDIER(timer) = 0;
+		rCCER(timer) = 0;
+		rCCMR1(timer) = 0;
+		rCCMR2(timer) = 0;
+		rCCR1(timer) = 0;
+		rCCR2(timer) = 0;
+		rCCR3(timer) = 0;
+		rCCR4(timer) = 0;
+		rCCER(timer) = 0;
+		rDCR(timer) = 0;
+
+		if ((spix_sync_timers[timer].base == STM32_TIM1_BASE) || (spix_sync_timers[timer].base == STM32_TIM8_BASE)) {
+
+			/* master output enable = on */
+
+			rBDTR(timer) = ATIM_BDTR_MOE;
+		}
+
+		/* If the timer clock source provided as clock_freq is the STM32_APBx_TIMx_CLKIN
+		 * then configure the timer to free-run at 1MHz.
+		 * Otherwise, other frequencies are attainable by adjusting .clock_freq accordingly.
+		 */
+
+		rPSC(timer) = (spix_sync_timers[timer].clock_freq / BOARD_SPIX_SYNC_PWM_FREQ) - 1;
+
+		/* configure the timer to update at the desired rate */
+
+		rARR(timer) = (BOARD_SPIX_SYNC_PWM_FREQ / rate) - 1;
+
+		/* generate an update event; reloads the counter and all registers */
+		rEGR(timer) = GTIM_EGR_UG;
+
+		px4_leave_critical_section(flags);
+	}
+
+}
+
+void spix_sync_channel_init(unsigned channel)
+{
+	/* Only initialize used channels */
+
+	if (spix_sync_channels[channel].timer_channel) {
+
+		unsigned timer = spix_sync_channels[channel].timer_index;
+
+		/* configure the GPIO first */
+		px4_arch_configgpio(spix_sync_channels[channel].gpio_out);
+
+		uint16_t polarity = spix_sync_channels[channel].masks;
+
+		/* configure the channel */
+		switch (spix_sync_channels[channel].timer_channel) {
+		case 1:
+			rCCMR1(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR1_OC1M_SHIFT) | GTIM_CCMR1_OC1PE;
+			rCCER(timer) |= polarity | GTIM_CCER_CC1E;
+			break;
+
+		case 2:
+			rCCMR1(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR1_OC2M_SHIFT) | GTIM_CCMR1_OC2PE;
+			rCCER(timer) |= polarity | GTIM_CCER_CC2E;
+			break;
+
+		case 3:
+			rCCMR2(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR2_OC3M_SHIFT) | GTIM_CCMR2_OC3PE;
+			rCCER(timer) |= polarity | GTIM_CCER_CC3E;
+			break;
+
+		case 4:
+			rCCMR2(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR2_OC4M_SHIFT) | GTIM_CCMR2_OC4PE;
+			rCCER(timer) |= polarity | GTIM_CCER_CC4E;
+			break;
+		}
+	}
+}
+
+int
+spix_sync_servo_set(unsigned channel, uint8_t  cvalue)
+{
+	if (channel >= arraySize(spix_sync_channels)) {
+		return -1;
+	}
+
+	unsigned timer = spix_sync_channels[channel].timer_index;
+
+	/* test timer for validity */
+	if ((spix_sync_timers[timer].base == 0) ||
+	    (spix_sync_channels[channel].gpio_out == 0)) {
+		return -1;
+	}
+
+	unsigned period = spix_sync_timer_get_period(timer);
+
+	unsigned value = (unsigned)cvalue * period / 255;
+
+	/* configure the channel */
+	if (value > 0) {
+		value--;
+	}
+
+
+	switch (spix_sync_channels[channel].timer_channel) {
+	case 1:
+		rCCR1(timer) = value;
+		break;
+
+	case 2:
+		rCCR2(timer) = value;
+		break;
+
+	case 3:
+		rCCR3(timer) = value;
+		break;
+
+	case 4:
+		rCCR4(timer) = value;
+		break;
+
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+unsigned spix_sync_servo_get(unsigned channel)
+{
+	if (channel >= 3) {
+		return 0;
+	}
+
+	unsigned timer = spix_sync_channels[channel].timer_index;
+	uint16_t value = 0;
+
+	/* test timer for validity */
+	if ((spix_sync_timers[timer].base == 0) ||
+	    (spix_sync_channels[channel].timer_channel == 0)) {
+		return 0;
+	}
+
+	/* configure the channel */
+	switch (spix_sync_channels[channel].timer_channel) {
+	case 1:
+		value = rCCR1(timer);
+		break;
+
+	case 2:
+		value = rCCR2(timer);
+		break;
+
+	case 3:
+		value = rCCR3(timer);
+		break;
+
+	case 4:
+		value = rCCR4(timer);
+		break;
+	}
+
+	unsigned period = spix_sync_timer_get_period(timer);
+	return ((value + 1) * 255 / period);
+}
+
+int spix_sync_servo_init(unsigned rate)
+{
+	/* do basic timer initialisation first */
+	for (unsigned i = 0; i < arraySize(spix_sync_timers); i++) {
+		spix_sync_timer_init_timer(i, rate);
+	}
+
+	/* now init channels */
+	for (unsigned i = 0; i < arraySize(spix_sync_channels); i++) {
+		spix_sync_channel_init(i);
+	}
+
+	spix_sync_servo_arm(true);
+	return OK;
+}
+
+void
+spix_sync_servo_deinit(void)
+{
+	/* disable the timers */
+	spix_sync_servo_arm(false);
+}
+void
+spix_sync_servo_arm(bool armed)
+{
+	/* iterate timers and arm/disarm appropriately */
+	for (unsigned i = 0; i < arraySize(spix_sync_timers); i++) {
+		if (spix_sync_timers[i].base != 0) {
+			if (armed) {
+				/* force an update to preload all registers */
+				rEGR(i) = GTIM_EGR_UG;
+
+				/* arm requires the timer be enabled */
+				rCR1(i) |= GTIM_CR1_CEN | GTIM_CR1_ARPE;
+
+			} else {
+				rCR1(i) = 0;
+			}
+		}
+	}
+}
@@ -1,7 +1,6 @@
 /****************************************************************************
 *
- *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
- *   Author: David Sidrane<david_s5@nscdg.com>
+ *   Copyright (C) 2023 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -33,5 +32,11 @@
 ****************************************************************************/

 __BEGIN_DECLS
-void rgb_led(int r, int g, int b, int freqs);
+void spix_sync_channel_init(unsigned channel);
+int spix_sync_servo_set(unsigned channel, uint8_t  value);
+unsigned spix_sync_servo_get(unsigned channel);
+int spix_sync_servo_init(unsigned rate);
+void spix_sync_servo_deinit(void);
+void spix_sync_servo_arm(bool armed);
+unsigned spix_sync_timer_get_period(unsigned timer);
 __END_DECLS
@@ -60,7 +60,8 @@ constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
 	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
 	initIOTimer(Timer::Timer12),
-	initIOTimer(Timer::Timer1),
+	//initIOTimer(Timer::Timer1),
+	//initIOTimer(Timer::Timer2),
 };

 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
@@ -72,8 +73,18 @@ constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
 	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel1}, {GPIO::PortH, GPIO::Pin6}),
 	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel2}, {GPIO::PortH, GPIO::Pin9}),
-	initIOTimerChannelCapture(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
+	//initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
+	//initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
 };

 constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
 	initIOTimerChannelMapping(io_timers, timer_io_channels);
+
+
+constexpr io_timers_t spix_sync_timers[MAX_SPIX_SYNC_TIMERS] = {
+	initIOTimer(Timer::Timer1),
+};
+
+constexpr timer_io_channels_t spix_sync_channels[MAX_SPIX_SYNC_TIMERS] = {
+	initIOTimerChannel(spix_sync_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
+};
@@ -1,5 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m4"
-CONFIG_BOARD_ROMFSROOT=""
-CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_DRIVERS_BOOTLOADERS=y
@@ -1,22 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m4"
-CONFIG_BOARD_ROMFSROOT="cannode"
-CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_DRIVERS_BOOTLOADERS=y
-CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
-CONFIG_BOARD_UAVCAN_INTERFACES=1
-CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH=y
-CONFIG_MODULES_SENSORS=y
-# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
-# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
-# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -1,13 +0,0 @@
-{
-    "board_id": 93,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the ARK MAG board",
-    "image": "",
-    "build_time": 0,
-    "summary": "ARKMAG",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 2080768,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,6 +0,0 @@
-#!/bin/sh
-#
-# board sensors init
-#------------------------------------------------------------------------------
-
-rm3100 -s -b 2 start
@@ -1,57 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/mag/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F412CE=y
-CONFIG_ARCH_INTERRUPTSTACK=4096
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BINFMT_DISABLE=y
-CONFIG_BOARDCTL=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_INIT_STACKSIZE=4096
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=0
-CONFIG_NUNGET_CHARS=0
-CONFIG_PREALLOC_TIMERS=0
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_DISABLE_BUFFERING=y
-CONFIG_STM32_FLASH_CONFIG_G=y
-CONFIG_STM32_NOEXT_VECTORS=y
-CONFIG_STM32_TIM8=y
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_USEC_PER_TICK=1000
@@ -1,132 +0,0 @@
-/************************************************************************************
- * configs/px4fmu/include/board.h
- * include/arch/board/board.h
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#include "board_dma_map.h"
-
-#ifndef __ARCH_BOARD_BOARD_H
-#define __ARCH_BOARD_BOARD_H
-
-#include <nuttx/config.h>
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include <stm32.h>
-
-/* HSI - 8 MHz RC factory-trimmed
- * LSI - 32 KHz RC
- * HSE - 8  MHz Crystal
- * LSE - not installed
- */
-#define STM32_BOARD_USEHSE      1
-#define STM32_BOARD_XTAL        8000000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-
-/* Main PLL Configuration */
-#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
-#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
-#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
-#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
-#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
-
-#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
-#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
-
-#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
-#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
-#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
-
-#define STM32_SYSCLK_FREQUENCY  96000000ul
-
-/* AHB clock (HCLK) is SYSCLK (96MHz) */
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
-
-/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* APB2 clock (PCLK2) is HCLK (96MHz) */
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
-#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
-
-/* Timers driven from APB2 will be PCLK2 since no prescale division */
-#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
-
-/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
-#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
-#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
-
-/* Alternate function pin selections ************************************************/
-
-/* UARTs */
-#define GPIO_USART2_RX	GPIO_USART2_RX_1
-#define GPIO_USART2_TX	GPIO_USART2_TX_1
-
-/* CAN */
-#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
-#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
-
-/* SPI */
-#define GPIO_SPI2_MISO  GPIO_SPI2_MISO_1 /* PB14 */
-#define GPIO_SPI2_MOSI  GPIO_SPI2_MOSI_1 /* PB15 */
-#define GPIO_SPI2_SCK   GPIO_SPI2_SCK_1  /* PB10 */
-
-#endif /* __ARCH_BOARD_BOARD_H */
@@ -1,42 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMA1 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX   // DMA1, Stream 3, Channel 0
-#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX   // DMA1, Stream 4, Channel 0
-
-//  DMA2 Channel/Stream Selections
-//--------------------------------------------//---------------------------//----------------
@@ -1,149 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_CAT is not set
-# CONFIG_NSH_DISABLE_CD is not set
-# CONFIG_NSH_DISABLE_CP is not set
-# CONFIG_NSH_DISABLE_DATE is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_ECHO is not set
-# CONFIG_NSH_DISABLE_ENV is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXPORT is not set
-# CONFIG_NSH_DISABLE_FREE is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_KILL is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_LS is not set
-# CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MOUNT is not set
-# CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
-# CONFIG_NSH_DISABLE_PWD is not set
-# CONFIG_NSH_DISABLE_RM is not set
-# CONFIG_NSH_DISABLE_RMDIR is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_SET is not set
-# CONFIG_NSH_DISABLE_SLEEP is not set
-# CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TEST is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_NSH_DISABLE_UMOUNT is not set
-# CONFIG_NSH_DISABLE_UNSET is not set
-# CONFIG_NSH_DISABLE_USLEEP is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/mag/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32=y
-CONFIG_ARCH_CHIP_STM32F412CE=y
-CONFIG_ARCH_INTERRUPTSTACK=768
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_ASSERT_RESET_VALUE=0
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_INIT_ENTRYPOINT="nsh_main"
-CONFIG_INIT_STACKSIZE=2624
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=2
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=262144
-CONFIG_RAM_START=0x20000000
-CONFIG_RAW_BINARY=y
-CONFIG_READLINE_CMD_HISTORY=y
-CONFIG_READLINE_TABCOMPLETION=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=254
-CONFIG_SCHED_HPWORKSTACKSIZE=3000
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_WAITPID=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
-CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_FLASH_CONFIG_G=y
-CONFIG_STM32_FLASH_PREFETCH=y
-CONFIG_STM32_FLOWCONTROL_BROKEN=y
-CONFIG_STM32_JTAG_SW_ENABLE=y
-CONFIG_STM32_PWR=y
-CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32_SPI2=y
-CONFIG_STM32_SPI2_DMA=y
-CONFIG_STM32_SPI2_DMA_BUFFER=2048
-CONFIG_STM32_TIM8=y
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART_BREAKS=y
-CONFIG_STM32_WWDG=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_SERIAL_CONSOLE=y
-CONFIG_USART2_TXBUFSIZE=1100
-CONFIG_USEC_PER_TICK=1000
@@ -1,134 +0,0 @@
-/****************************************************************************
- * nuttx-config/scripts/canbootloader_script.ld
- *
- *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,146 +0,0 @@
-/****************************************************************************
- * scripts/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
- * 256Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of SRAM beginning at address 0x2002:0000
- * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The first 0x10000 of flash is reserved for the bootloader.
- */
-
-MEMORY
-{
-    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
-    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
-}
-
-OUTPUT_ARCH(arm)
-
-ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
-EXTERN(_vectors)	/* force the vectors to be included in the output */
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(8);
-		/*
-		* This section positions the app_descriptor_t used
-		* by the make_can_boot_descriptor.py tool to set
-		* the application image's descriptor so that the
-		* uavcan bootloader has the ability to validate the
-		* image crc, size etc
-		*/
-		KEEP(*(.app_descriptor))
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-        .init_section : {
-                _sinit = ABSOLUTE(.);
-                KEEP(*(.init_array .init_array.*))
-                _einit = ABSOLUTE(.);
-        } > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,65 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
-
-	add_library(drivers_board
-		boot_config.h
-		boot.c
-		led.c
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch
-			nuttx_drivers
-			canbootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
-
-else()
-	add_library(drivers_board
-		can.c
-		init.c
-		led.c
-		spi.cpp
-	)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_spi
-			drivers__led # drv_led_start
-			nuttx_arch
-			nuttx_drivers
-			px4_layer
-	)
-endif()
@@ -1,88 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * board internal definitions
- */
-
-#pragma once
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-/* CAN  Silent mode control */
-#define GPIO_CAN1_SILENT_S0   /* PB11 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11)
-
-/* CAN termination software control */
-#define GPIO_CAN1_TERMINATION /* PB13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
-#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
-
-/* Boot config */
-#define GPIO_BOOT_CONFIG      /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
-
-/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
-#define GPIO_TIM1_CH1         /* PA8  */ (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-#define GPIO_TIM1_CH2         /* PA9  */ (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-#define GPIO_TIM1_CH3         /* PA10 */ (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
-
-#define FLASH_BASED_PARAMS
-
-/* High-resolution timer */
-#define HRT_TIMER                    3  /* use timer 3 for the HRT */
-#define HRT_TIMER_CHANNEL            4  /* use capture/compare channel 4 */
-
-#define PX4_GPIO_INIT_LIST { \
-		GPIO_BOOT_CONFIG,                 \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_CAN1_SILENT_S0,              \
-		GPIO_CAN1_TERMINATION,            \
-	}
-
-__BEGIN_DECLS
-
-#define BOARD_HAS_N_S_RGB_LED       1
-#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
-
-#ifndef __ASSEMBLY__
-
-extern void stm32_spiinitialize(void);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS
@@ -1,188 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *       Author: Ben Dyer <ben_dyer@mac.com>
- *               Pavel Kirienko <pavel.kirienko@zubax.com>
- *               David Sidrane <david_s5@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <px4_config.h>
-#include <stdint.h>
-#include "boot_config.h"
-#include "board.h"
-
-#include <debug.h>
-#include <string.h>
-#include <arch/board/board.h>
-
-#include <nuttx/board.h>
-#include "led.h"
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
-	stm32_configgpio(GPIO_CAN1_RX);
-	stm32_configgpio(GPIO_CAN1_TX);
-	stm32_configgpio(GPIO_CAN1_SILENT_S0);
-	stm32_configgpio(GPIO_CAN1_TERMINATION);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-
-#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
-	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
-#endif
-
-}
-
-/************************************************************************************
- * Name: board_deinitialize
- *
- * Description:
- *   This function is called by the bootloader code prior to booting
- *   the application. Is should place the HW into an benign initialized state.
- *
- ************************************************************************************/
-
-void board_deinitialize(void)
-{
-	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
-}
-
-/****************************************************************************
- * Name: board_get_product_name
- *
- * Description:
- *   Called to retrieve the product name. The returned value is a assumed
- *   to be written to a pascal style string that will be length prefixed
- *   and not null terminated
- *
- * Input Parameters:
- *    product_name - A pointer to a buffer to write the name.
- *    maxlen       - The maximum number of charter that can be written
- *
- * Returned Value:
- *   The length of characters written to the buffer.
- *
- ****************************************************************************/
-
-uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
-{
-	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
-	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
-}
-
-/****************************************************************************
- * Name: board_get_hardware_version
- *
- * Description:
- *   Called to retrieve the hardware version information. The function
- *   will first initialize the the callers struct to all zeros.
- *
- * Input Parameters:
- *    hw_version - A pointer to a uavcan_hardwareversion_t.
- *
- * Returned Value:
- *   Length of the unique_id
- *
- ****************************************************************************/
-
-size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
-{
-	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
-
-	hw_version->major = HW_VERSION_MAJOR;
-	hw_version->minor = HW_VERSION_MINOR;
-
-	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
-}
-
-/****************************************************************************
- * Name: board_indicate
- *
- * Description:
- *   Provides User feedback to indicate the state of the bootloader
- *   on board specific  hardware.
- *
- * Input Parameters:
- *    indication - A member of the uiindication_t
- *
- * Returned Value:
- *   None
- *
- ****************************************************************************/
-#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
-
-typedef begin_packed_struct struct led_t {
-	uint8_t red;
-	uint8_t green;
-	uint8_t blue;
-	uint8_t hz;
-} end_packed_struct led_t;
-
-static const  led_t i2l[] = {
-
-	led(0, off,                             0,     0,     0,     0),
-	led(1, reset,                          128,   128,   128,   30),
-	led(2, autobaud_start,                  0,   128,     0,     1),
-	led(3, autobaud_end,                    0,   128,     0,     2),
-	led(4, allocation_start,                0,     0,    64,     2),
-	led(5, allocation_end,                  0,   128,    64,     3),
-	led(6, fw_update_start,                32,   128,    64,     3),
-	led(7, fw_update_erase_fail,           32,   128,    32,     3),
-	led(8, fw_update_invalid_response,     64,     0,     0,     1),
-	led(9, fw_update_timeout,              64,     0,     0,     2),
-	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
-	led(b, jump_to_app,                     0,   128,     0,    10),
-
-};
-
-void board_indicate(uiindication_t indication)
-{
-	rgb_led(i2l[indication].red,
-		i2l[indication].green,
-		i2l[indication].blue,
-		i2l[indication].hz);
-}
@@ -1,130 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/*
- * @file boot_config.h
- *
- * bootloader definitions that configures the behavior and options
- * of the Boot loader
- * This file is relies on the parent folder's boot_config.h file and defines
- * different usages of the hardware for bootloading
- */
-
-#pragma once
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-/* Bring in the board_config.h definitions
- * todo:make this be pulled in from a targed's build
- * files in nuttx*/
-
-#include "board_config.h"
-#include "uavcan.h"
-#include <nuttx/compiler.h>
-
-#include <stdint.h>
-
-#include <stm32_flash.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
-
-//todo:wrap OPT_x in in ifdefs for command line definitions
-#define OPT_TBOOT_MS                    3000
-#define OPT_NODE_STATUS_RATE_MS         800
-#define OPT_NODE_INFO_RATE_MS           50
-#define OPT_BL_NUMBER_TIMERS            7
-
-/*
- *  This Option set is set to 1 ensure a provider of firmware has an
- *  opportunity update the node's firmware.
- *  This Option is the default policy and can be overridden by
- *  a jumper
- *  When this Policy is set, the node will ignore tboot and
- *  wait indefinitely for a GetNodeInfo request before booting.
- *
- *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
- *  the polarity of the jumper to be True Active
- *
- *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
- *                                                 Jumper
- *   yes           1                       0         x
- *   yes           1                       1       Active
- *   no            1                       1       Not Active
- *   no            0                       0         X
- *   yes           0                       1       Active
- *   no            0                       1       Not Active
- *
- */
-#define OPT_WAIT_FOR_GETNODEINFO                    0
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
-#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 1
-
-#define OPT_ENABLE_WD           1
-
-#define OPT_RESTART_TIMEOUT_MS          20000
-
-/* Reserved for the Booloader */
-#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
-
-/* Reserved for the application out of the total
- * system flash minus the BOOTLOADER_SIZE_IN_K
- */
-#define OPT_APPLICATION_RESERVER_IN_K    0
-
-#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
-#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
-
-
-#define FLASH_BASE              STM32_FLASH_BASE
-#define FLASH_SIZE              STM32_FLASH_SIZE
-
-#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
-#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
-#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
-#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
-
-/* If this board uses big flash that have large sectors */
-
-#define OPT_USE_YIELD
-
-/* Bootloader Option*****************************************************************
- *
- */
-#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)
@@ -1,130 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file can.c
- *
- * Board-specific CAN functions.
- */
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_internal.h"
-
-#include "stm32.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-#ifdef CONFIG_CAN
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif
@@ -1,147 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * board specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-#include <px4_platform_common/px4_config.h>
-#include <px4_platform_common/tasks.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include <nuttx/board.h>
-
-#include <stm32.h>
-#include "board_config.h"
-#include "led.h"
-#include <stm32_uart.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <drivers/drv_watchdog.h>
-
-#include <systemlib/px4_macros.h>
-
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-
-# if defined(FLASH_BASED_PARAMS)
-#  include <parameters/flashparams/flashfs.h>
-#endif
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_boardinitialize(void)
-{
-	watchdog_init();
-
-	/* configure pins */
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-
-	// Configure SPI all interfaces GPIO & enable power.
-	stm32_spiinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-	px4_platform_init();
-
-#if defined(FLASH_BASED_PARAMS)
-	static sector_descriptor_t params_sector_map[] = {
-		{2, 16 * 1024, 0x08008000},
-		{3, 16 * 1024, 0x0800C000},
-		{0, 0, 0},
-	};
-
-	/* Initialize the flashfs layer to use heap allocated memory */
-	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
-
-	if (result != OK) {
-		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
-	}
-
-#endif // FLASH_BASED_PARAMS
-
-	/* Configure the HW based on the manifest */
-	//px4_platform_configure();
-
-	return OK;
-}
@@ -1,124 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file led.c
- *
- * LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-#include "led.h"
-
-#define TMR_BASE        STM32_TIM1_BASE
-#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
-#define TMR_REG(o)      (TMR_BASE+(o))
-
-void rgb_led(int r, int g, int b, int freqs)
-{
-
-	long fosc = TMR_FREQUENCY;
-	long prescale = 2048;
-	long p1s = fosc / prescale;
-	long p0p5s  = p1s / 2;
-	uint16_t val;
-	static bool once = 0;
-
-	if (!once) {
-		once = 1;
-
-		/* Enable Clock to Block */
-		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
-
-		/* Reload */
-
-		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
-		val |= ATIM_EGR_UG;
-		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
-
-		/* Set Prescaler STM32_TIM_SETCLOCK */
-
-		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
-
-		/* Enable STM32_TIM_SETMODE*/
-
-		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-
-		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
-			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
-		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
-		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
-			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
-			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
-
-
-		stm32_configgpio(GPIO_TIM1_CH1);
-		stm32_configgpio(GPIO_TIM1_CH2);
-		stm32_configgpio(GPIO_TIM1_CH3);
-
-		/* master output enable = on */
-		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
-	}
-
-	long p  = freqs == 0 ? p1s : p1s / freqs;
-	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
-
-	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
-
-	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
-	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
-	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
-
-	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-	if (freqs == 0) {
-		val &= ~ATIM_CR1_CEN;
-
-	} else {
-		val |= ATIM_CR1_CEN;
-	}
-
-	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
-
-}
@@ -1,44 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI2, {
-		initSPIDevice(DRV_MAG_DEVTYPE_RM3100, SPI::CS{GPIO::PortB, GPIO::Pin12}, SPI::DRDY{GPIO::PortB, GPIO::Pin4}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -1,17 +0,0 @@
-# UAVCAN boot loadable Module ID
-set(uavcanblid_sw_version_major ${PX4_VERSION_MAJOR})
-set(uavcanblid_sw_version_minor ${PX4_VERSION_MINOR})
-add_definitions(
-	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
-	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
-)
-
-set(uavcanblid_hw_version_major 0)
-set(uavcanblid_hw_version_minor 93)
-set(uavcanblid_name "\"org.ark.mag\"")
-
-add_definitions(
-	-DHW_UAVCAN_NAME=${uavcanblid_name}
-	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
-	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
-)
@@ -1,2 +0,0 @@
-4001_quad_x
-4601_droneblocks_dexi_5
@@ -226,8 +226,8 @@ CONFIG_STM32H7_PHY_POLLING=y
 CONFIG_STM32H7_PROGMEM=y
 CONFIG_STM32H7_RTC=y
 CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC=0xA5A5A5A5
 CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_RTC_MAGIC=0xA5A5A5A5
 CONFIG_STM32H7_RTC_MAGIC_TIME_SET=0xA6A6A6A6
 CONFIG_STM32H7_SAVE_CRASHDUMP=y
 CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
@@ -171,10 +171,6 @@
 /* Enable the buffer for the dmesg command */
 #define BOARD_ENABLE_CONSOLE_BUFFER

-/* No CDCACM driver for this board, so this is manually defined for version.c
- * so that the px4_board_version reports the correct board id to the companion */
-#define CONFIG_CDCACM_PRODUCTID 60
-
 __BEGIN_DECLS

 /****************************************************************************************************
@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""
--- a/Show More
+++ b/Show More