Wip FMUV3

src/drivers/boards/px4fmu-v2/CMakeLists.txt

@@ -44,4 +44,4 @@ px4_add_module(
 	DEPENDS
 		platforms__common
 	)
-# vim: set noet ft=cmake fenc=utf-8 ff=unix : 
+# vim: set noet ft=cmake fenc=utf-8 ff=unix :

src/drivers/boards/px4fmu-v3/CMakeLists.txt

@@ -0,0 +1,47 @@
+############################################################################
+#
+#   Copyright (c) 2015 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+px4_add_module(
+	MODULE drivers__boards__px4fmu-v3
+	COMPILE_FLAGS
+		-Os
+	SRCS
+		px4fmu_can.c
+		px4fmu3_init.c
+		px4fmu_pwm_servo.c
+		px4fmu_spi.c
+		px4fmu_usb.c
+		px4fmu3_led.c
+	DEPENDS
+		platforms__common
+	)
+# vim: set noet ft=cmake fenc=utf-8 ff=unix : 

src/drivers/boards/px4fmu-v3/board_config.h

@@ -0,0 +1,279 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * PX4FMUv2 internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+__BEGIN_DECLS
+
+/* these headers are not C++ safe */
+#include <stm32.h>
+#include <arch/board/board.h>
+
+#define UDID_START		0x1FFF7A10
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+/* Configuration ************************************************************************************/
+//{GPIO_RSSI_IN,           0,                       0}, - pio Analog used as PWM
+//{0,                      GPIO_LED_SAFETY,         0},	pio replacement
+//{GPIO_SAFETY_SWITCH_IN,  0,                       0},   pio replacement
+//{0,                      GPIO_PERIPH_3V3_EN,      0},	Owned by the 8266 driver
+//{0,                      GPIO_SBUS_INV,           0},	https://github.com/PX4/Firmware/blob/master/src/modules/px4iofirmware/sbus.c
+//{GPIO_8266_GPIO0,        0,                       0},   Owned by the 8266 driver
+//{0,                      GPIO_SPEKTRUM_POWER,     0},	Owned Spektum driver input to auto pilot
+//{0,                      GPIO_8266_PD,            0},	Owned by the 8266 driver
+//{0,                      GPIO_8266_RST,           0},	Owned by the 8266 driver
+
+/* PX4FMU GPIOs ***********************************************************************************/
+/* LEDs */
+
+#define GPIO_LED1		(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11)
+#define GPIO_LED2		(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_LED3		(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN3)
+
+#define GPIO_LED_RED 	GPIO_LED1
+#define GPIO_LED_GREEN 	GPIO_LED2
+#define GPIO_LED_BLUE   GPIO_LED3
+
+/*  Define the Chip Selects */
+
+#define GPIO_SPI_CS_MPU9250		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN2)
+#define GPIO_SPI_CS_HMC5983		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN15)
+#define GPIO_SPI_CS_MS5611		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN7)
+#define GPIO_SPI_CS_ICM_20608_G (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15)
+
+#define GPIO_SPI_CS_FRAM		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
+
+/*  Define the Ready interrupts */
+
+#define GPIO_DRDY_MPU9250		(GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15)
+#define GPIO_DRDY_HMC5983		(GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN12)
+#define GPIO_DRDY_ICM_20608_G	(GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN14)
+
+
+/*
+ *  Define the ability to shut off off the sensor signals
+ *  by changing the signals to inputs
+ */
+
+#define _PIN_OFF(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz))
+
+#define GPIO_SPI_CS_OFF_MPU9250		_PIN_OFF(GPIO_SPI_CS_MPU9250)
+#define GPIO_SPI_CS_OFF_HMC5983		_PIN_OFF(GPIO_SPI_CS_HMC5983)
+#define GPIO_SPI_CS_OFF_MS5611		_PIN_OFF(GPIO_SPI_CS_MS5611)
+#define GPIO_SPI_CS_OFF_ICM_20608_G _PIN_OFF(GPIO_SPI_CS_ICM_20608_G)
+
+#define GPIO_DRDY_OFF_MPU9250		_PIN_OFF(GPIO_DRDY_MPU9250)
+#define GPIO_DRDY_OFF_HMC5983		_PIN_OFF(GPIO_DRDY_HMC5983)
+#define GPIO_DRDY_OFF_ICM_20608_G	_PIN_OFF(GPIO_DRDY_ICM_20608_G)
+
+
+/* SPI1 off */
+#define GPIO_SPI1_SCK_OFF	_PIN_OFF(GPIO_SPI1_SCK)
+#define GPIO_SPI1_MISO_OFF	_PIN_OFF(GPIO_SPI1_MISO)
+#define GPIO_SPI1_MOSI_OFF	_PIN_OFF(GPIO_SPI1_MOSI)
+
+#define PX4_SPI_BUS_SENSORS	1
+#define PX4_SPI_BUS_RAMTRON	2
+
+/* Use these in place of the spi_dev_e enumeration to select a specific SPI device on SPI1 */
+#define PX4_SPIDEV_GYRO			1
+#define PX4_SPIDEV_ACCEL_MAG	2
+#define PX4_SPIDEV_BARO			3
+#define PX4_SPIDEV_MPU			4
+#define PX4_SPIDEV_HMC			5
+
+/* I2C busses */
+#define PX4_I2C_BUS_EXPANSION	1
+#define PX4_I2C_BUS_LED			PX4_I2C_BUS_EXPANSION
+
+/* Devices on the external bus.
+ *
+ * Note that these are unshifted addresses.
+ */
+#define PX4_I2C_OBDEV_LED	0x55
+#define PX4_I2C_OBDEV_HMC5883	0x1e
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
+ */
+#define ADC_CHANNELS (1 << 2) | (1 << 3) | (1 << 4) | (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) | (1 << 15)
+
+// ADC defines to be used in sensors.cpp to read from a particular channel
+#define ADC_BATTERY_VOLTAGE_CHANNEL		2
+#define ADC_BATTERY_CURRENT_CHANNEL		3
+#define ADC_5V_RAIL_SENSE				4
+#define ADC_AIRSPEED_VOLTAGE_CHANNEL	15
+
+/* User GPIOs
+ *
+ * GPIO0-5 are the PWM servo outputs.
+ */
+#define GPIO_GPIO0_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN14)
+#define GPIO_GPIO1_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN13)
+#define GPIO_GPIO2_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
+#define GPIO_GPIO3_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN9)
+#define GPIO_GPIO4_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN13)
+#define GPIO_GPIO5_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN14)
+
+#define GPIO_GPIO0_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)
+#define GPIO_GPIO1_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)
+#define GPIO_GPIO2_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)
+#define GPIO_GPIO3_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
+#define GPIO_GPIO4_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
+#define GPIO_GPIO5_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN14)
+
+/* Power supply control and monitoring GPIOs */
+#define GPIO_VDD_BRICK_VALID	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
+#define GPIO_VDD_3V3_SENSORS_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+
+/* Tone alarm output */
+#define TONE_ALARM_TIMER		2	/* timer 2 */
+#define TONE_ALARM_CHANNEL		1	/* channel 1 */
+#define GPIO_TONE_ALARM_IDLE	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
+#define GPIO_TONE_ALARM			(GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
+
+/* PWM
+ *
+ * Six PWM outputs are configured.
+ *
+ * Pins:
+ *
+ * CH1 : PE14 : TIM1_CH4
+ * CH2 : PE13 : TIM1_CH3
+ * CH3 : PE11 : TIM1_CH2
+ * CH4 : PE9  : TIM1_CH1
+ * CH5 : PD13 : TIM4_CH2
+ * CH6 : PD14 : TIM4_CH3
+ */
+#define GPIO_TIM1_CH1OUT	GPIO_TIM1_CH1OUT_2
+#define GPIO_TIM1_CH2OUT	GPIO_TIM1_CH2OUT_2
+#define GPIO_TIM1_CH3OUT	GPIO_TIM1_CH3OUT_2
+#define GPIO_TIM1_CH4OUT	GPIO_TIM1_CH4OUT_2
+#define GPIO_TIM4_CH2OUT	GPIO_TIM4_CH2OUT_2
+#define GPIO_TIM4_CH3OUT	GPIO_TIM4_CH3OUT_2
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS		(GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
+
+/* High-resolution timer */
+#define HRT_TIMER		8	/* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL	4	/* use capture/compare channel */
+
+#define HRT_PPM_CHANNEL		2	/* use capture/compare channel 2 */
+#define GPIO_PPM_IN			(GPIO_ALT|GPIO_AF3|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN7)
+
+/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
+#define PWMIN_TIMER			4
+#define PWMIN_TIMER_CHANNEL	2
+#define GPIO_PWM_IN			GPIO_TIM4_CH2IN_2
+
+#define GPIO_RSSI_IN 			(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN1)
+#define GPIO_LED_SAFETY			(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN3)
+#define GPIO_SAFETY_SWITCH_IN	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4)
+#define GPIO_PERIPH_3V3_EN		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN5)
+#define GPIO_SBUS_INV			(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
+
+#define GPIO_8266_GPIO0			(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN2)
+#define GPIO_SPEKTRUM_POWER		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4)
+#define GPIO_8266_PD			(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
+#define GPIO_8266_RST			(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization for NSH.
+ *
+ *   CONFIG_NSH_ARCHINIT=y :
+ *     Called from the NSH library
+ *
+ *   CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
+ *   CONFIG_NSH_ARCHINIT=n :
+ *     Called from board_initialize().
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NSH_LIBRARY
+int nsh_archinitialize(void);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

src/drivers/boards/px4fmu-v3/px4fmu3_init.c

@@ -0,0 +1,344 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_init.c
+ *
+ * PX4FMU-specific early startup code.  This file implements the
+ * nsh_archinitialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialisation.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/spi.h>
+#include <nuttx/i2c.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <nuttx/analog/adc.h>
+#include <nuttx/gran.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_led.h>
+
+#include <systemlib/cpuload.h>
+#include <systemlib/perf_counter.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lowsyslog(__VA_ARGS__)
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lowsyslog
+#  else
+#    define message printf
+#  endif
+#endif
+
+/*
+ * Ideally we'd be able to get these from up_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+/****************************************************************************
+ * Protected Functions
+ ****************************************************************************/
+
+#if defined(CONFIG_FAT_DMAMEMORY)
+# if !defined(CONFIG_GRAN) || !defined(CONFIG_FAT_DMAMEMORY)
+#  error microSD DMA support requires CONFIG_GRAN
+# endif
+
+static GRAN_HANDLE dma_allocator;
+
+/*
+ * The DMA heap size constrains the total number of things that can be
+ * ready to do DMA at a time.
+ *
+ * For example, FAT DMA depends on one sector-sized buffer per filesystem plus
+ * one sector-sized buffer per file.
+ *
+ * We use a fundamental alignment / granule size of 64B; this is sufficient
+ * to guarantee alignment for the largest STM32 DMA burst (16 beats x 32bits).
+ */
+static uint8_t g_dma_heap[8192] __attribute__((aligned(64)));
+static perf_counter_t g_dma_perf;
+
+static void
+dma_alloc_init(void)
+{
+	dma_allocator = gran_initialize(g_dma_heap,
+					sizeof(g_dma_heap),
+					7,  /* 128B granule - must be > alignment (XXX bug?) */
+					6); /* 64B alignment */
+
+	if (dma_allocator == NULL) {
+		message("[boot] DMA allocator setup FAILED");
+
+	} else {
+		g_dma_perf = perf_alloc(PC_COUNT, "DMA allocations");
+	}
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/*
+ * DMA-aware allocator stubs for the FAT filesystem.
+ */
+
+__EXPORT void *fat_dma_alloc(size_t size);
+__EXPORT void fat_dma_free(FAR void *memory, size_t size);
+
+void *
+fat_dma_alloc(size_t size)
+{
+	perf_count(g_dma_perf);
+	return gran_alloc(dma_allocator, size);
+}
+
+void
+fat_dma_free(FAR void *memory, size_t size)
+{
+	gran_free(dma_allocator, memory, size);
+}
+
+#else
+
+# define dma_alloc_init()
+
+#endif
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void
+stm32_boardinitialize(void)
+{
+	/* configure SPI interfaces */
+	stm32_spiinitialize();
+
+	/* configure LEDs */
+	up_ledinit();
+}
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+static struct spi_dev_s *spi1;
+static struct spi_dev_s *spi2;
+static struct sdio_dev_s *sdio;
+
+#include <math.h>
+
+/* TODO XXX commented this out to get cmake build working */
+/*#ifdef __cplusplus*/
+/*__EXPORT int matherr(struct __exception *e)*/
+/*{*/
+/*return 1;*/
+/*}*/
+/*#else*/
+/*__EXPORT int matherr(struct exception *e)*/
+/*{*/
+/*return 1;*/
+/*}*/
+/*#endif*/
+
+__EXPORT int nsh_archinitialize(void)
+{
+
+	/* configure ADC pins */
+	stm32_configgpio(GPIO_ADC1_IN2);	/* BATT_VOLTAGE_SENS */
+	stm32_configgpio(GPIO_ADC1_IN3);	/* BATT_CURRENT_SENS */
+	stm32_configgpio(GPIO_ADC1_IN4);	/* VDD_5V_SENS */
+	// stm32_configgpio(GPIO_ADC1_IN10);	/* used by VBUS valid */
+	// stm32_configgpio(GPIO_ADC1_IN11);	/* unused */
+	// stm32_configgpio(GPIO_ADC1_IN12);	/* used by MPU6000 CS */
+	stm32_configgpio(GPIO_ADC1_IN13);	/* FMU_AUX_ADC_1 */
+	stm32_configgpio(GPIO_ADC1_IN14);	/* FMU_AUX_ADC_2 */
+	stm32_configgpio(GPIO_ADC1_IN15);	/* PRESSURE_SENS */
+
+	/* configure power supply control/sense pins */
+	stm32_configgpio(GPIO_PERIPH_3V3_EN);
+	stm32_configgpio(GPIO_VDD_BRICK_VALID);
+	stm32_configgpio(GPIO_GPIO5_OUTPUT);
+
+	/* configure the high-resolution time/callout interface */
+	hrt_init();
+
+	/* configure the DMA allocator */
+	dma_alloc_init();
+
+	/* configure CPU load estimation */
+#ifdef CONFIG_SCHED_INSTRUMENTATION
+	cpuload_initialize_once();
+#endif
+
+	/* set up the serial DMA polling */
+	static struct hrt_call serial_dma_call;
+	struct timespec ts;
+
+	/*
+	 * Poll at 1ms intervals for received bytes that have not triggered
+	 * a DMA event.
+	 */
+	ts.tv_sec = 0;
+	ts.tv_nsec = 1000000;
+
+	hrt_call_every(&serial_dma_call,
+		       ts_to_abstime(&ts),
+		       ts_to_abstime(&ts),
+		       (hrt_callout)stm32_serial_dma_poll,
+		       NULL);
+
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_RED);
+	led_off(LED_GREEN);
+	led_off(LED_BLUE);
+
+	/* Configure SPI-based devices */
+
+	spi1 = up_spiinitialize(1);
+
+	if (!spi1) {
+		message("[boot] FAILED to initialize SPI port 1\n");
+		up_ledon(LED_RED);
+		return -ENODEV;
+	}
+
+	/* Default SPI1 to 1MHz and de-assert the known chip selects. */
+	SPI_SETFREQUENCY(spi1, 10000000);
+	SPI_SETBITS(spi1, 8);
+	SPI_SETMODE(spi1, SPIDEV_MODE3);
+	SPI_SELECT(spi1, PX4_SPIDEV_GYRO, false);
+	SPI_SELECT(spi1, PX4_SPIDEV_HMC, false);
+	SPI_SELECT(spi1, PX4_SPIDEV_BARO, false);
+	SPI_SELECT(spi1, PX4_SPIDEV_MPU, false);
+	up_udelay(20);
+
+	/* Get the SPI port for the FRAM */
+
+	spi2 = up_spiinitialize(2);
+
+	if (!spi2) {
+		message("[boot] FAILED to initialize SPI port 2\n");
+		up_ledon(LED_RED);
+		return -ENODEV;
+	}
+
+	/* Default SPI2 to 37.5 MHz (40 MHz rounded to nearest valid divider, F4 max)
+	 * and de-assert the known chip selects. */
+
+	// XXX start with 10.4 MHz in FRAM usage and go up to 37.5 once validated
+	SPI_SETFREQUENCY(spi2, 12 * 1000 * 1000);
+	SPI_SETBITS(spi2, 8);
+	SPI_SETMODE(spi2, SPIDEV_MODE3);
+	SPI_SELECT(spi2, SPIDEV_FLASH, false);
+
+#ifdef CONFIG_MMCSD
+	/* First, get an instance of the SDIO interface */
+
+	sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
+
+	if (!sdio) {
+		message("[boot] Failed to initialize SDIO slot %d\n",
+			CONFIG_NSH_MMCSDSLOTNO);
+		return -ENODEV;
+	}
+
+	/* Now bind the SDIO interface to the MMC/SD driver */
+	int ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
+
+	if (ret != OK) {
+		message("[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+		return ret;
+	}
+
+	/* Then let's guess and say that there is a card in the slot. There is no card detect GPIO. */
+	sdio_mediachange(sdio, true);
+
+#endif
+
+	return OK;
+}

src/drivers/boards/px4fmu-v3/px4fmu3_led.c

@@ -0,0 +1,106 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu2_led.c
+ *
+ * PX4FMU LED backend.
+ */
+
+#include <px4_config.h>
+
+#include <stdbool.h>
+
+#include "stm32.h"
+#include "board_config.h"
+
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from up_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+
+
+static uint32_t g_ledmap[] = {
+	GPIO_LED_BLUE,    // Indexed by LED_BLUE
+	GPIO_LED_RED,     // Indexed by LED_RED, LED_AMBER
+	GPIO_LED_SAFETY,  // Indexed by LED_SAFETY
+	GPIO_LED_GREEN,   // Indexed by LED_GREEN
+};
+
+__EXPORT void led_init(void)
+{
+	/* Configure LED GPIOs for output */
+	for (size_t l = 0; l < (sizeof(g_ledmap)/sizeof(g_ledmap[0])); l++) {
+		stm32_configgpio(g_ledmap[l]);
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Pull Down to switch on */
+	stm32_gpiowrite(g_ledmap[led], !state);
+}
+
+static bool phy_get_led(int led)
+{
+
+	return !stm32_gpioread(g_ledmap[led]);
+}
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(led, true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(led, false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+
+	phy_set_led(led, !phy_get_led(led));
+}

src/drivers/boards/px4fmu-v3/px4fmu_can.c

@@ -0,0 +1,144 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing CAN */
+
+#ifdef CONFIG_DEBUG_CAN
+#  define candbg    dbg
+#  define canvdbg   vdbg
+#  define canlldbg  lldbg
+#  define canllvdbg llvdbg
+#else
+#  define candbg(x...)
+#  define canvdbg(x...)
+#  define canlldbg(x...)
+#  define canllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			candbg("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			candbg("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+
+#endif

src/drivers/boards/px4fmu-v3/px4fmu_pwm_servo.c

@@ -0,0 +1,105 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file px4fmu_pwm_servo.c
+ *
+ * Configuration data for the stm32 pwm_servo driver.
+ *
+ * Note that these arrays must always be fully-sized.
+ */
+
+#include <stdint.h>
+
+#include <stm32.h>
+#include <stm32_gpio.h>
+#include <stm32_tim.h>
+
+#include <drivers/stm32/drv_pwm_servo.h>
+#include <drivers/drv_pwm_output.h>
+
+#include "board_config.h"
+
+__EXPORT const struct pwm_servo_timer pwm_timers[PWM_SERVO_MAX_TIMERS] = {
+	{
+		.base = STM32_TIM1_BASE,
+		.clock_register = STM32_RCC_APB2ENR,
+		.clock_bit = RCC_APB2ENR_TIM1EN,
+		.clock_freq = STM32_APB2_TIM1_CLKIN
+	},
+	{
+		.base = STM32_TIM4_BASE,
+		.clock_register = STM32_RCC_APB1ENR,
+		.clock_bit = RCC_APB1ENR_TIM4EN,
+		.clock_freq = STM32_APB1_TIM4_CLKIN
+	}
+};
+
+__EXPORT const struct pwm_servo_channel pwm_channels[PWM_SERVO_MAX_CHANNELS] = {
+	{
+		.gpio = GPIO_TIM1_CH4OUT,
+		.timer_index = 0,
+		.timer_channel = 4,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM1_CH3OUT,
+		.timer_index = 0,
+		.timer_channel = 3,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM1_CH2OUT,
+		.timer_index = 0,
+		.timer_channel = 2,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM1_CH1OUT,
+		.timer_index = 0,
+		.timer_channel = 1,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM4_CH2OUT,
+		.timer_index = 1,
+		.timer_channel = 2,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM4_CH3OUT,
+		.timer_index = 1,
+		.timer_channel = 3,
+		.default_value = 1000,
+	}
+};

src/drivers/boards/px4fmu-v3/px4fmu_spi.c

@@ -0,0 +1,163 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_spi.c
+ *
+ * Board-specific SPI functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include <up_arch.h>
+#include <chip.h>
+#include <stm32.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_spiinitialize(void)
+{
+#ifdef CONFIG_STM32_SPI1
+	stm32_configgpio(GPIO_SPI_CS_MPU9250);
+	stm32_configgpio(GPIO_SPI_CS_HMC5983);
+	stm32_configgpio(GPIO_SPI_CS_MS5611);
+	stm32_configgpio(GPIO_SPI_CS_ICM_20608_G);
+
+	/* De-activate all peripherals,
+	 * required for some peripheral
+	 * state machines
+	 */
+	stm32_gpiowrite(GPIO_SPI_CS_MPU9250, 1);
+	stm32_gpiowrite(GPIO_SPI_CS_HMC5983, 1);
+	stm32_gpiowrite(GPIO_SPI_CS_MS5611, 1);
+	stm32_gpiowrite(GPIO_SPI_CS_ICM_20608_G, 1);
+
+	stm32_configgpio(GPIO_DRDY_MPU9250);
+	stm32_configgpio(GPIO_DRDY_HMC5983);
+	stm32_configgpio(GPIO_DRDY_ICM_20608_G);
+#endif
+
+#ifdef CONFIG_STM32_SPI2
+	stm32_configgpio(GPIO_SPI_CS_FRAM);
+	stm32_gpiowrite(GPIO_SPI_CS_FRAM, 1);
+#endif
+
+}
+
+__EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+	/* SPI select is active low, so write !selected to select the device */
+
+	switch (devid) {
+	case PX4_SPIDEV_GYRO:
+		/* Making sure the other peripherals are not selected */
+		stm32_gpiowrite(GPIO_SPI_CS_MPU9250, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_HMC5983, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_MS5611, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_ICM_20608_G, !selected);
+		break;
+
+	case PX4_SPIDEV_ACCEL_MAG:
+		/* Making sure the other peripherals are not selected */
+		break;
+
+	case PX4_SPIDEV_BARO:
+		/* Making sure the other peripherals are not selected */
+		stm32_gpiowrite(GPIO_SPI_CS_MPU9250, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_HMC5983, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_MS5611, !selected);
+		stm32_gpiowrite(GPIO_SPI_CS_ICM_20608_G, 1);
+		break;
+
+	case PX4_SPIDEV_HMC:
+		/* Making sure the other peripherals are not selected */
+		stm32_gpiowrite(GPIO_SPI_CS_MPU9250, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_HMC5983, !selected);
+		stm32_gpiowrite(GPIO_SPI_CS_MS5611, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_ICM_20608_G, 1);
+		break;
+
+	case PX4_SPIDEV_MPU:
+		/* Making sure the other peripherals are not selected */
+		stm32_gpiowrite(GPIO_SPI_CS_MPU9250, !selected);
+		stm32_gpiowrite(GPIO_SPI_CS_HMC5983, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_MS5611, 1);
+		stm32_gpiowrite(GPIO_SPI_CS_ICM_20608_G, 1);
+		break;
+
+	default:
+		break;
+	}
+}
+
+__EXPORT uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+	return SPI_STATUS_PRESENT;
+}
+
+
+#ifdef CONFIG_STM32_SPI2
+__EXPORT void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+	/* there can only be one device on this bus, so always select it */
+	stm32_gpiowrite(GPIO_SPI_CS_FRAM, !selected);
+}
+
+__EXPORT uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+	/* FRAM is always present */
+	return SPI_STATUS_PRESENT;
+}
+#endif

src/drivers/boards/px4fmu-v3/px4fmu_usb.c

@@ -0,0 +1,108 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include <up_arch.h>
+#include <stm32.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the PX4FMU board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+	/* XXX We only support device mode
+	stm32_configgpio(GPIO_OTGFS_PWRON);
+	stm32_configgpio(GPIO_OTGFS_OVER);
+	*/
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	ulldbg("resume: %d\n", resume);
+}
+

src/drivers/drv_gpio.h

@@ -94,6 +94,29 @@
 
 #endif
 
+#ifdef CONFIG_ARCH_BOARD_PX4FMU_V3
+/*
+ * PX4FMUv3 GPIO numbers.
+ *
+ * There are no alternate functions on this board.
+ */
+# define GPIO_SERVO_1			(1<<0)		/**< servo 1 output */
+# define GPIO_SERVO_2			(1<<1)		/**< servo 2 output */
+# define GPIO_SERVO_3			(1<<2)		/**< servo 3 output */
+# define GPIO_SERVO_4			(1<<3)		/**< servo 4 output */
+# define GPIO_SERVO_5			(1<<4)		/**< servo 5 output */
+# define GPIO_SERVO_6			(1<<5)		/**< servo 6 output */
+
+# define GPIO_3V3_SENSORS_EN	(1<<7)		/**< PE3 - VDD_3V3_SENSORS_EN */
+# define GPIO_BRICK_VALID		(1<<8)		/**< PB5 - !VDD_BRICK_VALID */
+
+/**
+ * Device paths for things that support the GPIO ioctl protocol.
+ */
+# define PX4FMU_DEVICE_PATH	"/dev/px4fmu"
+
+#endif
+
 #ifdef CONFIG_ARCH_BOARD_AEROCORE
 /*
  * AeroCore GPIO numbers and configuration.
@@ -121,7 +144,7 @@
 #if !defined(CONFIG_ARCH_BOARD_PX4IO_V1) && !defined(CONFIG_ARCH_BOARD_PX4IO_V2)  && \
 	!defined(CONFIG_ARCH_BOARD_PX4FMU_V1) && !defined(CONFIG_ARCH_BOARD_PX4FMU_V2) && \
 	!defined(CONFIG_ARCH_BOARD_AEROCORE) && !defined(CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY) && \
-	!defined(CONFIG_ARCH_BOARD_SITL)
+	!defined(CONFIG_ARCH_BOARD_PX4FMU_V3) && !defined(CONFIG_ARCH_BOARD_SITL)
 # error No CONFIG_ARCH_BOARD_xxxx set
 #endif
 /*

src/drivers/drv_led.h

@@ -52,6 +52,8 @@
 #define LED_RED			1	/* some boards have red rather than amber */
 #define LED_BLUE		0
 #define LED_SAFETY		2
+#define LED_GREEN		3
+
 
 #define LED_ON			_PX4_IOC(_LED_BASE, 0)
 #define LED_OFF			_PX4_IOC(_LED_BASE, 1)

src/drivers/meas_airspeed/meas_airspeed.cpp

@@ -335,7 +335,7 @@ MEASAirspeed::cycle()
 void
 MEASAirspeed::voltage_correction(float &diff_press_pa, float &temperature)
 {
-#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2
+#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) || defined(CONFIG_ARCH_BOARD_PX4FMU_V3)
 
 	if (_t_system_power == -1) {
 		_t_system_power = orb_subscribe(ORB_ID(system_power));
@@ -389,7 +389,7 @@ MEASAirspeed::voltage_correction(float &diff_press_pa, float &temperature)
 	}
 
 	temperature -= voltage_diff * temp_slope;
-#endif // CONFIG_ARCH_BOARD_PX4FMU_V2
+#endif // defined(CONFIG_ARCH_BOARD_PX4FMU_V2) || defined(CONFIG_ARCH_BOARD_PX4FMU_V3)
 }
 
 /**

src/drivers/px4fmu/fmu.cpp

@@ -121,7 +121,7 @@ private:
 #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1)
 	static const unsigned _max_actuators = 4;
 #endif
-#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2)
+#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) || defined(CONFIG_ARCH_BOARD_PX4FMU_V3)
 	static const unsigned _max_actuators = 6;
 #endif
 #if defined(CONFIG_ARCH_BOARD_AEROCORE)
@@ -232,6 +232,17 @@ const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = {
 	{GPIO_VDD_5V_HIPOWER_OC, 0,                       0},
 	{GPIO_VDD_5V_PERIPH_OC,  0,                       0},
 #endif
+#if defined(CONFIG_ARCH_BOARD_PX4FMU_V3)
+	{GPIO_GPIO0_INPUT,       GPIO_GPIO0_OUTPUT,       0},
+	{GPIO_GPIO1_INPUT,       GPIO_GPIO1_OUTPUT,       0},
+	{GPIO_GPIO2_INPUT,       GPIO_GPIO2_OUTPUT,       0},
+	{GPIO_GPIO3_INPUT,       GPIO_GPIO3_OUTPUT,       0},
+	{GPIO_GPIO4_INPUT,       GPIO_GPIO4_OUTPUT,       0},
+	{GPIO_GPIO5_INPUT,       GPIO_GPIO5_OUTPUT,       0},
+
+	{0,                      GPIO_VDD_3V3_SENSORS_EN, 0},
+	{GPIO_VDD_BRICK_VALID,   0,                       0},
+#endif
 #if defined(CONFIG_ARCH_BOARD_AEROCORE)
 	/* AeroCore breaks out User GPIOs on J11 */
 	{GPIO_GPIO0_INPUT,       GPIO_GPIO0_OUTPUT,       0},

src/drivers/stm32/adc/adc.cpp

@@ -348,6 +348,40 @@ ADC::update_system_power(void)
 	}
 
 #endif // CONFIG_ARCH_BOARD_PX4FMU_V2
+#ifdef CONFIG_ARCH_BOARD_PX4FMU_V3
+	system_power_s system_power;
+	system_power.timestamp = hrt_absolute_time();
+
+	system_power.voltage5V_v = 0;
+
+	for (unsigned i = 0; i < _channel_count; i++) {
+		if (_samples[i].am_channel == 4) {
+			// it is 2:1 scaled
+			system_power.voltage5V_v = _samples[i].am_data * (6.6f / 4096);
+		}
+	}
+
+	// these are not ADC related, but it is convenient to
+	// publish these to the same topic
+	system_power.usb_connected = stm32_gpioread(GPIO_OTGFS_VBUS);
+
+	// note that the valid pins are active High
+	system_power.brick_valid   = stm32_gpioread(GPIO_VDD_BRICK_VALID);
+	system_power.servo_valid   = 1;
+
+	// OC pins are not supported
+	system_power.periph_5V_OC  = 0;
+	system_power.hipower_5V_OC = 0;
+
+	/* lazily publish */
+	if (_to_system_power != nullptr) {
+		orb_publish(ORB_ID(system_power), _to_system_power, &system_power);
+
+	} else {
+		_to_system_power = orb_advertise(ORB_ID(system_power), &system_power);
+	}
+
+#endif // CONFIG_ARCH_BOARD_PX4FMU_V3
 }
 
 uint16_t

src/lib/version/version.h

@@ -51,6 +51,10 @@
 #define	HW_ARCH "PX4FMU_V2"
 #endif
 
+#ifdef CONFIG_ARCH_BOARD_PX4FMU_V3
+#define	HW_ARCH "PX4FMU_V3"
+#endif
+
 #ifdef CONFIG_ARCH_BOARD_AEROCORE
 #define	HW_ARCH "AEROCORE"
 #endif