fmurt1062-v1 Build for BB Rev A

boards/nxp/fmurt1062-v1/nuttx-config/include/board.h

@@ -46,7 +46,7 @@
 /************************************************************************************
  * Pre-processor Definitions
  ************************************************************************************/
-#define ON_EVK // For Board Bring up before BIG Board on IMXRT1060-EVK
+//#define ON_EVK // For Board Bring up before BIG Board on IMXRT1060-EVK
 
 /* Clocking *************************************************************************/
 

boards/nxp/fmurt1062-v1/nuttx-config/nsh/defconfig

@@ -8,6 +8,7 @@
 # CONFIG_DISABLE_OS_API is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
@@ -80,30 +81,83 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_IMXRT_EDMA=y
+CONFIG_IMXRT_GPIO1_0_15_IRQ=y
+CONFIG_IMXRT_GPIO1_16_31_IRQ=y
+CONFIG_IMXRT_GPIO2_0_15_IRQ=y
+CONFIG_IMXRT_GPIO2_16_31_IRQ=y
+CONFIG_IMXRT_GPIO3_0_15_IRQ=y
+CONFIG_IMXRT_GPIO3_16_31_IRQ=y
+CONFIG_IMXRT_GPIO4_0_15_IRQ=y
+CONFIG_IMXRT_GPIO4_16_31_IRQ=y
+CONFIG_IMXRT_GPIO5_0_15_IRQ=y
+CONFIG_IMXRT_GPIO5_16_31_IRQ=y
+CONFIG_IMXRT_GPIO6_0_15_IRQ=y
+CONFIG_IMXRT_GPIO6_16_31_IRQ=y
+CONFIG_IMXRT_GPIO7_0_15_IRQ=y
+CONFIG_IMXRT_GPIO7_16_31_IRQ=y
+CONFIG_IMXRT_GPIO8_0_15_IRQ=y
+CONFIG_IMXRT_GPIO8_16_31_IRQ=y
+CONFIG_IMXRT_GPIO9_0_15_IRQ=y
+CONFIG_IMXRT_GPIO9_16_31_IRQ=y
+CONFIG_IMXRT_GPIO_IRQ=y
+CONFIG_IMXRT_LPI2C1=y
+CONFIG_IMXRT_LPI2C2=y
+CONFIG_IMXRT_LPI2C3=y
+CONFIG_IMXRT_LPSPI1=y
+CONFIG_IMXRT_LPSPI2=y
 CONFIG_IMXRT_LPSPI3=y
-CONFIG_IMXRT_LPUART1=y
+CONFIG_IMXRT_LPSPI4=y
 CONFIG_IMXRT_LPUART2=y
 CONFIG_IMXRT_LPUART3=y
+CONFIG_IMXRT_LPUART4=y
+CONFIG_IMXRT_LPUART5=y
+CONFIG_IMXRT_LPUART6=y
+CONFIG_IMXRT_LPUART7=y
+CONFIG_IMXRT_LPUART8=y
 CONFIG_IMXRT_LPUART_INVERT=y
 CONFIG_IMXRT_RTC_MAGIC_REG=1
 CONFIG_IMXRT_SNVS_LPSRTC=y
 CONFIG_IMXRT_USDHC1=y
+CONFIG_IMXRT_USDHC1_WIDTH_D1_D4=y
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
+CONFIG_LPUART2_BAUD=57600
 CONFIG_LPUART2_RXBUFSIZE=600
 CONFIG_LPUART2_TXBUFSIZE=1500
 CONFIG_LPUART3_BAUD=57600
+CONFIG_LPUART3_IFLOWCONTROL=y
+CONFIG_LPUART3_OFLOWCONTROL=y
 CONFIG_LPUART3_RXBUFSIZE=600
-CONFIG_LPUART3_SERIAL_CONSOLE=y
 CONFIG_LPUART3_TXBUFSIZE=3000
+CONFIG_LPUART4_BAUD=57600
+CONFIG_LPUART4_IFLOWCONTROL=y
+CONFIG_LPUART4_OFLOWCONTROL=y
+CONFIG_LPUART4_RXBUFSIZE=600
+CONFIG_LPUART4_TXBUFSIZE=1500
+CONFIG_LPUART5_BAUD=57600
+CONFIG_LPUART5_RXBUFSIZE=600
+CONFIG_LPUART5_TXBUFSIZE=1500
+CONFIG_LPUART6_BAUD=57600
+CONFIG_LPUART6_RXBUFSIZE=600
+CONFIG_LPUART6_TXBUFSIZE=1500
+CONFIG_LPUART7_BAUD=57600
+CONFIG_LPUART7_RXBUFSIZE=120
+CONFIG_LPUART7_SERIAL_CONSOLE=y
+CONFIG_LPUART7_TXBUFSIZE=1500
+CONFIG_LPUART8_BAUD=57600
+CONFIG_LPUART8_RXBUFSIZE=600
+CONFIG_LPUART8_TXBUFSIZE=1500
 CONFIG_MAX_WDOGPARMS=2
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
-CONFIG_NFILE_DESCRIPTORS=54
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NFILE_DESCRIPTORS=20
 CONFIG_NFILE_STREAMS=8
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARCHROMFS=y
@@ -139,6 +193,8 @@ CONFIG_PREALLOC_WDOGS=50
 CONFIG_PRIORITY_INHERITANCE=y
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAMTRON_WRITEWAIT=y
 CONFIG_RAM_SIZE=1048576
 CONFIG_RAM_START=0x20200000
 CONFIG_RAW_BINARY=y
@@ -156,20 +212,19 @@ CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
 CONFIG_SIG_SIGUSR1_ACTION=y
 CONFIG_SIG_SIGUSR2_ACTION=y
 CONFIG_SIG_SIGWORK=4
-CONFIG_SPI=y
 CONFIG_STACK_COLORATION=y
 CONFIG_START_DAY=30
 CONFIG_START_MONTH=11
 CONFIG_STDIO_BUFFER_SIZE=32
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
-CONFIG_SYSTEM_SPITOOL=y
 CONFIG_TASK_NAME_SIZE=24
 CONFIG_TIME_EXTENDED=y
 CONFIG_USBDEV=y

boards/nxp/fmurt1062-v1/src/board_config.h

@@ -39,8 +39,6 @@
 
 #pragma once
 
-#define ON_EVK // For Board Bring up before BIG Board on IMXRT1060-EVK
-
 /****************************************************************************************************
  * Included Files
  ****************************************************************************************************/