fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-19 15:33:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'px4/master' into bottle_drop

Browse Source 
Conflicts:
	ROMFS/px4fmu_common/init.d/rcS
This commit is contained in:
Julian Oes
2014-03-07 10:38:31 +01:00
parent 40f2d581bf cf9fa61a39
commit 873fa4cb40
360 changed files with 18155 additions and 14500 deletions
Download Patch File Download Diff File Expand all files Collapse all files
ROMFS/px4fmu_common/init.d/08_ardrone
-57
View File
@@ -1,57 +0,0 @@
#!nsh
echo "[init] 08_ardrone: PX4FMU on PX4IOAR carrier board"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set MC_ATTRATE_D 0
param set MC_ATTRATE_I 0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0
param set MC_ATT_I 0.3
param set MC_ATT_P 5
param set MC_YAWPOS_D 0.1
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_P 1
param set MC_YAWRATE_D 0
param set MC_YAWRATE_I 0
param set MC_YAWRATE_P 0.15
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
param set BAT_V_SCALING 0.008381
#
# Start MAVLink
#
mavlink start -d /dev/ttyS0 -b 57600
usleep 5000
#
# Configure PX4FMU for operation with PX4IOAR
#
fmu mode_gpio_serial
#
# Fire up the AR.Drone interface.
#
ardrone_interface start -d /dev/ttyS1
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
# Exit, because /dev/ttyS0 is needed for MAVLink
exit
ROMFS/px4fmu_common/init.d/09_ardrone_flow
-88
View File
@@ -1,88 +0,0 @@
#!nsh
echo "[init] 09_ardrone_flow: PX4FMU on PX4IOAR carrier board with PX4FLOW"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set MC_ATTRATE_D 0
param set MC_ATTRATE_I 0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0
param set MC_ATT_I 0.3
param set MC_ATT_P 5
param set MC_YAWPOS_D 0.1
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_P 1
param set MC_YAWRATE_D 0
param set MC_YAWRATE_I 0
param set MC_YAWRATE_P 0.15
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
param set BAT_V_SCALING 0.008381
#
# Start MAVLink and MAVLink Onboard (PX4FLOW Sensor)
#
mavlink start -d /dev/ttyS0 -b 57600
mavlink_onboard start -d /dev/ttyS3 -b 115200
usleep 5000
#
# Configure PX4FMU for operation with PX4IOAR
#
fmu mode_gpio_serial
#
# Fire up the AR.Drone interface.
#
ardrone_interface start -d /dev/ttyS1
#
# Start the sensors.
#
sh /etc/init.d/rc.sensors
#
# Start the commander.
#
commander start
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start the position estimator
#
flow_position_estimator start
#
# Fire up the multi rotor attitude controller
#
multirotor_att_control start
#
# Fire up the flow position controller
#
flow_position_control start
#
# Fire up the flow speed controller
#
flow_speed_control start
# Exit, because /dev/ttyS0 is needed for MAVLink
exit
ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil
+7 -80
View File
@@ -1,87 +1,14 @@
#!nsh
#
# USB HIL start
# HILStar / X-Plane
#
# Lorenz Meier <lm@inf.ethz.ch>
#
echo "[HIL] HILStar starting.."
sh /etc/init.d/rc.fw_defaults
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
echo "HIL Rascal 110 starting.."
param set SYS_AUTOCONFIG 0
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/10015_tbs_discovery
+29
View File
@@ -0,0 +1,29 @@
#!nsh
#
# Team Blacksheep Discovery Quadcopter
#
# Anton Babushkin <anton.babushkin@me.com>, Simon Wilks <sjwilks@gmail.com>, Thomas Gubler <thomasgubler@gmail.com>
#
sh /etc/init.d/rc.mc_defaults
if [ $DO_AUTOCONFIG == yes ]
then
# TODO review MC_YAWRATE_I
param set MC_ROLL_P 8.0
param set MC_ROLLRATE_P 0.07
param set MC_ROLLRATE_I 0.05
param set MC_ROLLRATE_D 0.0017
param set MC_PITCH_P 8.0
param set MC_PITCHRATE_P 0.1
param set MC_PITCHRATE_I 0.1
param set MC_PITCHRATE_D 0.0025
param set MC_YAW_P 2.8
param set MC_YAWRATE_P 0.28
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
fi
set MIXER FMU_quad_w
set PWM_OUTPUTS 1234
ROMFS/px4fmu_common/init.d/10016_3dr_iris
+32
View File
@@ -0,0 +1,32 @@
#!nsh
#
# 3DR Iris Quadcopter
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
if [ $DO_AUTOCONFIG == yes ]
then
# TODO tune roll/pitch separately
param set MC_ROLL_P 9.0
param set MC_ROLLRATE_P 0.13
param set MC_ROLLRATE_I 0.0
param set MC_ROLLRATE_D 0.004
param set MC_PITCH_P 9.0
param set MC_PITCHRATE_P 0.13
param set MC_PITCHRATE_I 0.0
param set MC_PITCHRATE_D 0.004
param set MC_YAW_P 0.5
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set BAT_V_SCALING 0.00989
param set BAT_C_SCALING 0.0124
fi
set MIXER FMU_quad_w
set PWM_OUTPUTS 1234
ROMFS/px4fmu_common/init.d/1001_rc_quad.hil
-105
View File
@@ -1,105 +0,0 @@
#!nsh
#
# USB HIL start
#
echo "[HIL] HILS quadrotor starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.0
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.05
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.1
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.05
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.5
param set MPC_THR_MIN 0.1
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
echo "[HIL] setup done, running"
ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil
+12
View File
@@ -0,0 +1,12 @@
#!nsh
#
# HIL Quadcopter X
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_quad_x
set HIL yes
ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil
-79
View File
@@ -1,79 +0,0 @@
#!nsh
#
# USB HIL start
#
echo "[HIL] HILStar starting in state-HIL mode.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set SYS_AUTOCONFIG 0
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil
+6 -99
View File
@@ -1,105 +1,12 @@
#!nsh
#
# USB HIL start
# HIL Quadcopter +
#
# Anton Babushkin <anton.babushkin@me.com>
#
echo "[HIL] HILS quadrotor + starting.."
sh /etc/init.d/rc.mc_defaults
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.0
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.05
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 3.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.1
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.05
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.5
param set MPC_THR_MIN 0.1
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 2
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
echo "[HIL] setup done, running"
set MIXER FMU_quad_+
set HIL yes
ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
+7 -91
View File
@@ -1,98 +1,14 @@
#!nsh
#
# USB HIL start
# HIL Rascal 110 (Flightgear)
#
# Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting.."
sh /etc/init.d/rc.fw_defaults
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
echo "HIL Rascal 110 starting.."
param set SYS_AUTOCONFIG 0
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
set MODE autostart
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
else
echo "Using /etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
fi
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil
+47
View File
@@ -0,0 +1,47 @@
#!nsh
#
# HIL Malolo 1 (Flightgear)
#
# Thomas Gubler <thomasgubler@gmail.com>
#
sh /etc/init.d/rc.fw_defaults
if [ $DO_AUTOCONFIG == yes ]
then
param set FW_AIRSPD_MIN 12
param set FW_AIRSPD_TRIM 25
param set FW_AIRSPD_MAX 40
param set FW_ATT_TC 0.3
param set FW_L1_DAMPING 0.74
param set FW_L1_PERIOD 15
param set FW_PR_FF 0.8
param set FW_PR_I 0.05
param set FW_PR_IMAX 0.2
param set FW_PR_P 0.1
param set FW_P_ROLLFF 0
param set FW_RR_FF 0.6
param set FW_RR_I 0.02
param set FW_RR_IMAX 0.2
param set FW_RR_P 0.1
param set FW_R_LIM 45
param set FW_R_RMAX 0
param set FW_T_CLMB_MAX 5
param set FW_T_HRATE_P 0.02
param set FW_T_PTCH_DAMP 0
param set FW_T_RLL2THR 15
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_SRATE_P 0.01
param set FW_T_TIME_CONST 3
param set FW_T_VERT_ACC 7
param set FW_YR_FF 0.0
param set FW_YR_I 0
param set FW_YR_IMAX 0.2
param set FW_YR_P 0.0
fi
set HIL yes
# Set the AERT mixer for HIL (even if the malolo is a flying wing)
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/100_mpx_easystar
-87
View File
@@ -1,87 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on EasyStar"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_RET.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_RET.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_RET.mix
else
echo "Using /etc/mixers/FMU_RET.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/101_hk_bixler
-87
View File
@@ -1,87 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on HK Bixler"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/102_3dr_skywalker
-89
View File
@@ -1,89 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
pwm disarmed -c 3 -p 1056
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AETR.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AETR.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/10_dji_f330
-97
View File
@@ -1,97 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on DJI F330"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals (for DJI ESCs)
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1200
pwm max -c 1234 -p 1800
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/11001_hexa_cox
+15
View File
@@ -0,0 +1,15 @@
#!nsh
#
# UNTESTED UNTESTED!
#
# Generic 10” Hexa coaxial geometry
#
# Lorenz Meier <lm@inf.ethz.ch>
#
sh /etc/init.d/rc.mc_defaults
set MIXER hexa_cox
# We only can run one channel group with one rate, so set all 8 channels
set PWM_OUTPUTS 12345678
ROMFS/px4fmu_common/init.d/11_dji_f450
-83
View File
@@ -1,83 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on DJI F450"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
commander start
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals (for DJI ESCs)
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1200
pwm max -c 1234 -p 1800
#
# Start common multirotor apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/12-13_hex
-98
View File
@@ -1,98 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Hex"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 7.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/
# 13 = hexarotor
#
param set MAV_TYPE 13
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_hex_x.mix
#
# Set PWM output frequency to 400 Hz
#
pwm rate -a -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 123456 -p 900
pwm min -c 123456 -p 1100
pwm max -c 123456 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/12001_octo_cox
+12
View File
@@ -0,0 +1,12 @@
#!nsh
#
# Generic 10” Octo coaxial geometry
#
# Lorenz Meier <lm@inf.ethz.ch>
#
sh /etc/init.d/rc.mc_defaults
set MIXER octo_cox
set PWM_OUTPUTS 12345678
ROMFS/px4fmu_common/init.d/15_tbs_discovery
-81
View File
@@ -1,81 +0,0 @@
#!nsh
echo "[init] Team Blacksheep Discovery Quad"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.006
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.17
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 5.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.2
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1100
pwm max -c 1234 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/16_3dr_iris
-80
View File
@@ -1,80 +0,0 @@
#!nsh
echo "[init] 3DR Iris Quad"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.004
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.13
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 9.0
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.15
param set MC_YAWPOS_P 0.5
param set MC_YAWRATE_D 0.0
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_P 0.2
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.0098
set EXIT_ON_END yes
fi
#
# Load the mixer for a quad with wide arms
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1050
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/2100_mpx_easystar
+8
View File
@@ -0,0 +1,8 @@
#!nsh
#
# MPX EasyStar Plane
#
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_RET
ROMFS/px4fmu_common/init.d/2101_hk_bixler
+5
View File
@@ -0,0 +1,5 @@
#!nsh
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/2102_3dr_skywalker
+5
View File
@@ -0,0 +1,5 @@
#!nsh
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_AERT
ROMFS/px4fmu_common/init.d/3030_io_camflyer
+5
View File
@@ -0,0 +1,5 @@
#!nsh
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_Q
ROMFS/px4fmu_common/init.d/3031_phantom
+10
View File
@@ -0,0 +1,10 @@
#!nsh
#
# Phantom FPV Flying Wing
#
# Simon Wilks <sjwilks@gmail.com>
#
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_Q
ROMFS/px4fmu_common/init.d/3032_skywalker_x5
+39
View File
@@ -0,0 +1,39 @@
#!nsh
#
# Skywalker X5 Flying Wing
#
# Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch>
#
sh /etc/init.d/rc.fw_defaults
if [ $DO_AUTOCONFIG == yes ]
then
param set FW_AIRSPD_MIN 15
param set FW_AIRSPD_TRIM 20
param set FW_AIRSPD_MAX 40
param set FW_ATT_TC 0.3
param set FW_L1_DAMPING 0.74
param set FW_L1_PERIOD 15
param set FW_PR_FF 0.3
param set FW_PR_I 0
param set FW_PR_IMAX 0.2
param set FW_PR_P 0.03
param set FW_P_LIM_MAX 45
param set FW_P_LIM_MIN -45
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 0
param set FW_RR_FF 0.3
param set FW_RR_I 0
param set FW_RR_IMAX 0.2
param set FW_RR_P 0.03
param set FW_R_LIM 60
param set FW_R_RMAX 0
param set FW_T_HRATE_P 0.01
param set FW_T_RLL2THR 15
param set FW_T_SRATE_P 0.01
param set FW_T_TIME_CONST 5
fi
set MIXER FMU_X5
ROMFS/px4fmu_common/init.d/3033_wingwing
+10
View File
@@ -0,0 +1,10 @@
#!nsh
#
# Wing Wing (aka Z-84) Flying Wing
#
# Simon Wilks <sjwilks@gmail.com>
#
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_Q
ROMFS/px4fmu_common/init.d/3034_fx79
+10
View File
@@ -0,0 +1,10 @@
#!nsh
#
# FX-79 Buffalo Flying Wing
#
# Simon Wilks <sjwilks@gmail.com>
#
sh /etc/init.d/rc.fw_defaults
set MIXER FMU_FX79
ROMFS/px4fmu_common/init.d/30_io_camflyer
-65
View File
@@ -1,65 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Camflyer"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/31_io_phantom
-87
View File
@@ -1,87 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Phantom FPV"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 17
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/32_skywalker_x5
-65
View File
@@ -1,65 +0,0 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/4001_quad_x
+12
View File
@@ -0,0 +1,12 @@
#!nsh
#
# Generic 10” Quad X geometry
#
# Lorenz Meier <lm@inf.ethz.ch>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_quad_x
set PWM_OUTPUTS 1234
ROMFS/px4fmu_common/init.d/4008_ardrone
+35
View File
@@ -0,0 +1,35 @@
#!nsh
#
# ARDrone
#
echo "[init] 4008_ardrone: PX4FMU on PX4IOAR carrier board"
# Just use the default multicopter settings.
sh /etc/init.d/rc.mc_defaults
#
# Load default params for this platform
#
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set MC_ROLL_P 5.0
param set MC_ROLLRATE_P 0.13
param set MC_ROLLRATE_I 0.0
param set MC_ROLLRATE_D 0.0
param set MC_PITCH_P 5.0
param set MC_PITCHRATE_P 0.13
param set MC_PITCHRATE_I 0.0
param set MC_PITCHRATE_D 0.0
param set MC_YAW_P 1.0
param set MC_YAW_D 0.1
param set MC_YAWRATE_P 0.15
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set MC_YAW_FF 0.15
fi
set OUTPUT_MODE ardrone
set USE_IO no
set MIXER skip
ROMFS/px4fmu_common/init.d/4010_dji_f330
+27
View File
@@ -0,0 +1,27 @@
#!nsh
#
# DJI Flame Wheel F330 Quadcopter
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/4001_quad_x
if [ $DO_AUTOCONFIG == yes ]
then
param set MC_ROLL_P 7.0
param set MC_ROLLRATE_P 0.1
param set MC_ROLLRATE_I 0.0
param set MC_ROLLRATE_D 0.003
param set MC_PITCH_P 7.0
param set MC_PITCHRATE_P 0.1
param set MC_PITCHRATE_I 0.0
param set MC_PITCHRATE_D 0.003
param set MC_YAW_P 2.8
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
fi
set PWM_MIN 1175
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/4011_dji_f450
+28
View File
@@ -0,0 +1,28 @@
#!nsh
#
# DJI Flame Wheel F450 Quadcopter
#
# Lorenz Meier <lm@inf.ethz.ch>
#
sh /etc/init.d/4001_quad_x
if [ $DO_AUTOCONFIG == yes ]
then
# TODO REVIEW
param set MC_ROLL_P 7.0
param set MC_ROLLRATE_P 0.1
param set MC_ROLLRATE_I 0.0
param set MC_ROLLRATE_D 0.003
param set MC_PITCH_P 7.0
param set MC_PITCHRATE_P 0.1
param set MC_PITCHRATE_I 0.0
param set MC_PITCHRATE_D 0.003
param set MC_YAW_P 2.8
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
fi
set PWM_MIN 1175
set PWM_MAX 1900
ROMFS/px4fmu_common/init.d/40_io_segway
-56
View File
@@ -1,56 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 10 = ground rover
#
param set MAV_TYPE 10
#
# Start MAVLink (depends on orb)
#
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
#
# Start and configure PX4IO interface
#
sh /etc/init.d/rc.io
#
# Start the commander (depends on orb, mavlink)
#
commander start
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator (depends on orb)
#
attitude_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
roboclaw start /dev/ttyS2 128 1200
segway start
ROMFS/px4fmu_common/init.d/5001_quad_+
+12
View File
@@ -0,0 +1,12 @@
#!nsh
#
# Generic 10” Quad + geometry
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_quad_+
set PWM_OUTPUTS 1234
ROMFS/px4fmu_common/init.d/6001_hexa_x
+13
View File
@@ -0,0 +1,13 @@
#!nsh
#
# Generic 10” Hexa X geometry
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_hexa_x
# We only can run one channel group with one rate, so set all 8 channels
set PWM_OUTPUTS 12345678
ROMFS/px4fmu_common/init.d/666_fmu_q_x550
-83
View File
@@ -1,83 +0,0 @@
#!nsh
echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with or without IO"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set MC_ATTRATE_P 0.14
param set MC_ATTRATE_I 0
param set MC_ATTRATE_D 0.006
param set MC_ATT_P 5.5
param set MC_ATT_I 0
param set MC_ATT_D 0
param set MC_YAWPOS_D 0
param set MC_YAWPOS_I 0
param set MC_YAWPOS_P 0.6
param set MC_YAWRATE_D 0
param set MC_YAWRATE_I 0
param set MC_YAWRATE_P 0.08
param set RC_SCALE_PITCH 1
param set RC_SCALE_ROLL 1
param set RC_SCALE_YAW 3
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
#
# Set PWM output frequency
#
pwm rate -c 1234 -r 400
#
# Set disarmed, min and max PWM signals
#
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 1100
pwm max -c 1234 -p 1900
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/7001_hexa_+
+13
View File
@@ -0,0 +1,13 @@
#!nsh
#
# Generic 10” Hexa + geometry
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_hexa_+
# We only can run one channel group with one rate, so set all 8 channels
set PWM_OUTPUTS 12345678
ROMFS/px4fmu_common/init.d/8001_octo_x
+12
View File
@@ -0,0 +1,12 @@
#!nsh
#
# Generic 10” Octo X geometry
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_octo_x
set PWM_OUTPUTS 12345678
ROMFS/px4fmu_common/init.d/9001_octo_+
+12
View File
@@ -0,0 +1,12 @@
#!nsh
#
# Generic 10” Octo + geometry
#
# Anton Babushkin <anton.babushkin@me.com>
#
sh /etc/init.d/rc.mc_defaults
set MIXER FMU_octo_+
set PWM_OUTPUTS 12345678
ROMFS/px4fmu_common/init.d/900_bottle_drop_test
-75
View File
@@ -1,75 +0,0 @@
#!nsh
echo "[init] bottle drop test
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start and configure PX4IO and FMU interface
#
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
#sh /etc/init.d/rc.logging
sdlog2 start -r 200 -e -b 16
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start position estimator
#
position_estimator_inav start
sh /etc/init.d/rc.io
fmu mode_pwm
mixer load /dev/px4fmu /etc/mixers/FMU_pass.mix
pwm min -d /dev/px4fmu -c 123 -p 900
pwm max -d /dev/px4fmu -c 123 -p 2100
pwm arm -d /dev/px4fmu
bottle_drop start
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/901_bottle_drop_test.hil
-91
View File
@@ -1,91 +0,0 @@
#!nsh
#
# USB HIL start
#
echo "[HIL] HILStar starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 15
param set FW_P_LIM_MAX 50
param set FW_P_LIM_MIN -50
param set FW_P_P 60
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 1.1
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 100
param set FW_R_RMAX 100
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 1
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
#
# Start IO
#
px4io start
mixer load /dev/px4io /etc/mixers/FMU_pass.mix
pwm min -d /dev/px4io -c 123 -p 900
pwm max -d /dev/px4io -c 123 -p 2100
pwm arm -d /dev/px4io
bottle_drop start
echo "[HIL] setup done, running"
ROMFS/px4fmu_common/init.d/cmp_test
-9
View File
@@ -1,9 +0,0 @@
#!nsh
cp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded
if cmp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded
then
echo "CMP returned true"
else
echo "CMP returned false"
fi
ROMFS/px4fmu_common/init.d/rc.autostart
+203
View File
@@ -0,0 +1,203 @@
#
# Check if auto-setup from one of the standard scripts is wanted
# SYS_AUTOSTART = 0 means no autostart (default)
#
# AUTOSTART PARTITION:
# 0 .. 999 Reserved (historical)
# 1000 .. 1999 Simulation setups
# 2000 .. 2999 Standard planes
# 3000 .. 3999 Flying wing
# 4000 .. 4999 Quad X
# 5000 .. 5999 Quad +
# 6000 .. 6999 Hexa X
# 7000 .. 7999 Hexa +
# 8000 .. 8999 Octo X
# 9000 .. 9999 Octo +
# 10000 .. 10999 Wide arm / H frame
# 11000 .. 11999 Hexa Cox
# 12000 .. 12999 Octo Cox
#
# Simulation setups
#
if param compare SYS_AUTOSTART 1000
then
sh /etc/init.d/1000_rc_fw_easystar.hil
fi
if param compare SYS_AUTOSTART 1001
then
sh /etc/init.d/1001_rc_quad_x.hil
fi
if param compare SYS_AUTOSTART 1003
then
sh /etc/init.d/1003_rc_quad_+.hil
fi
if param compare SYS_AUTOSTART 1004
then
sh /etc/init.d/1004_rc_fw_Rascal110.hil
fi
if param compare SYS_AUTOSTART 1005
then
sh /etc/init.d/1005_rc_fw_Malolo1.hil
fi
#
# Standard plane
#
if param compare SYS_AUTOSTART 2100 100
then
sh /etc/init.d/2100_mpx_easystar
set MODE custom
fi
if param compare SYS_AUTOSTART 2101 101
then
sh /etc/init.d/2101_hk_bixler
set MODE custom
fi
if param compare SYS_AUTOSTART 2102 102
then
sh /etc/init.d/2102_3dr_skywalker
set MODE custom
fi
#
# Flying wing
#
if param compare SYS_AUTOSTART 3030 30
then
sh /etc/init.d/3030_io_camflyer
fi
if param compare SYS_AUTOSTART 3031 31
then
sh /etc/init.d/3031_phantom
fi
if param compare SYS_AUTOSTART 3032 32
then
sh /etc/init.d/3032_skywalker_x5
fi
if param compare SYS_AUTOSTART 3033 33
then
sh /etc/init.d/3033_wingwing
fi
if param compare SYS_AUTOSTART 3034 34
then
sh /etc/init.d/3034_fx79
fi
#
# Quad X
#
if param compare SYS_AUTOSTART 4001
then
sh /etc/init.d/4001_quad_x
fi
#
# ARDrone
#
if param compare SYS_AUTOSTART 4008 8
then
sh /etc/init.d/4008_ardrone
fi
if param compare SYS_AUTOSTART 4010 10
then
sh /etc/init.d/4010_dji_f330
fi
if param compare SYS_AUTOSTART 4011 11
then
sh /etc/init.d/4011_dji_f450
fi
#
# Quad +
#
if param compare SYS_AUTOSTART 5001
then
sh /etc/init.d/5001_quad_+
fi
#
# Hexa X
#
if param compare SYS_AUTOSTART 6001
then
sh /etc/init.d/6001_hexa_x
fi
#
# Hexa +
#
if param compare SYS_AUTOSTART 7001
then
sh /etc/init.d/7001_hexa_+
fi
#
# Octo X
#
if param compare SYS_AUTOSTART 8001
then
sh /etc/init.d/8001_octo_x
fi
#
# Octo +
#
if param compare SYS_AUTOSTART 9001
then
sh /etc/init.d/9001_octo_+
fi
#
# Wide arm / H frame
#
if param compare SYS_AUTOSTART 10015 15
then
sh /etc/init.d/10015_tbs_discovery
fi
if param compare SYS_AUTOSTART 10016 16
then
sh /etc/init.d/10016_3dr_iris
fi
#
# Hexa Coaxial
#
if param compare SYS_AUTOSTART 11001
then
sh /etc/init.d/11001_hexa_cox
fi
#
# Octo Coaxial
#
if param compare SYS_AUTOSTART 12001
then
sh /etc/init.d/12001_octo_cox
fi
ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl
-113
View File
@@ -1,113 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.002
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.09
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 6.8
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
#
# Start the Mikrokopter ESC driver
#
if [ $MKBLCTRL_MODE == yes ]
then
if [ $MKBLCTRL_FRAME == x ]
then
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing"
mkblctrl -mkmode x
else
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing"
mkblctrl -mkmode +
fi
else
if [ $MKBLCTRL_FRAME == x ]
then
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame"
else
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame"
fi
mkblctrl
fi
usleep 10000
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
usleep 5000
sh /etc/init.d/rc.io
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
usleep 5000
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer
#
if [ $MKBLCTRL_FRAME == x ]
then
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix
else
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix
fi
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
ROMFS/px4fmu_common/init.d/rc.custom_io_esc
-120
View File
@@ -1,120 +0,0 @@
#!nsh
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
then
# Set all params here, then disable autoconfig
param set SYS_AUTOCONFIG 0
param set MC_ATTRATE_D 0.002
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_P 0.09
param set MC_ATT_D 0.0
param set MC_ATT_I 0.0
param set MC_ATT_P 6.8
param set MC_YAWPOS_D 0.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_P 2.0
param set MC_YAWRATE_D 0.005
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_P 0.3
param set NAV_TAKEOFF_ALT 3.0
param set MPC_TILT_MAX 0.5
param set MPC_THR_MAX 0.7
param set MPC_THR_MIN 0.3
param set MPC_XY_D 0
param set MPC_XY_P 0.5
param set MPC_XY_VEL_D 0
param set MPC_XY_VEL_I 0
param set MPC_XY_VEL_MAX 3
param set MPC_XY_VEL_P 0.2
param set MPC_Z_D 0
param set MPC_Z_P 1
param set MPC_Z_VEL_D 0
param set MPC_Z_VEL_I 0.1
param set MPC_Z_VEL_MAX 2
param set MPC_Z_VEL_P 0.20
param save
fi
echo "RC script for PX4FMU + PX4IO + PPM-ESCs running"
#
# Force some key parameters to sane values
# MAV_TYPE 2 = quadrotor
#
param set MAV_TYPE 2
set EXIT_ON_END no
usleep 10000
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
sh /etc/init.d/rc.io
else
fmu mode_pwm
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS1 -b 57600
usleep 5000
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
if [ $ESC_MAKER = afro ]
then
# Set PWM values for Afro ESCs
pwm disarmed -c 1234 -p 1050
pwm min -c 1234 -p 1080
pwm max -c 1234 -p 1860
else
# Set PWM values for typical ESCs
pwm disarmed -c 1234 -p 900
pwm min -c 1234 -p 980
pwm max -c 1234 -p 1800
fi
#
# Load mixer
#
if [ $FRAME_GEOMETRY == x ]
then
echo "Frame geometry X"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix
else
if [ $FRAME_GEOMETRY == w ]
then
echo "Frame geometry W"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix
else
echo "Frame geometry +"
mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix
fi
fi
#
# Set PWM output frequency
#
pwm rate -r 400 -c 1234
#
# Start common for all multirotors apps
#
sh /etc/init.d/rc.multirotor
if [ $EXIT_ON_END == yes ]
then
exit
fi
echo "Script end"
ROMFS/px4fmu_common/init.d/rc.fixedwing
-34
View File
@@ -1,34 +0,0 @@
#!nsh
#
# Standard everything needed for fixedwing except mixer, actuator output and mavlink
#
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
sh /etc/init.d/rc.logging
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude and position estimator
#
att_pos_estimator_ekf start
#
# Start attitude controller
#
fw_att_control start
#
# Start the position controller
#
fw_pos_control_l1 start
ROMFS/px4fmu_common/init.d/rc.fw_apps
+8
View File
@@ -0,0 +1,8 @@
#!nsh
#
# Standard apps for fixed wing
#
att_pos_estimator_ekf start
fw_att_control start
fw_pos_control_l1 start
ROMFS/px4fmu_common/init.d/rc.fw_defaults
+14
View File
@@ -0,0 +1,14 @@
#!nsh
set VEHICLE_TYPE fw
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for FW
#
param set NAV_LAND_ALT 90
param set NAV_RTL_ALT 100
param set NAV_RTL_LAND_T -1
param set NAV_ACCEPT_RAD 50
fi
ROMFS/px4fmu_common/init.d/rc.interface
+75
View File
@@ -0,0 +1,75 @@
#!nsh
#
# Script to configure control interface
#
if [ $MIXER != none -a $MIXER != skip ]
then
#
# Load mixer
#
set MIXERSD /fs/microsd/etc/mixers/$MIXER.mix
#Use the mixer file from the SD-card if it exists
if [ -f $MIXERSD ]
then
set MIXER_FILE $MIXERSD
else
set MIXER_FILE /etc/mixers/$MIXER.mix
fi
if [ $OUTPUT_MODE == mkblctrl ]
then
set OUTPUT_DEV /dev/mkblctrl
else
set OUTPUT_DEV /dev/pwm_output
fi
if mixer load $OUTPUT_DEV $MIXER_FILE
then
echo "[init] Mixer loaded: $MIXER_FILE"
else
echo "[init] Error loading mixer: $MIXER_FILE"
tone_alarm $TUNE_OUT_ERROR
fi
else
if [ $MIXER != skip ]
then
echo "[init] Mixer not defined"
tone_alarm $TUNE_OUT_ERROR
fi
fi
if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == io ]
then
if [ $PWM_OUTPUTS != none ]
then
#
# Set PWM output frequency
#
if [ $PWM_RATE != none ]
then
echo "[init] Set PWM rate: $PWM_RATE"
pwm rate -c $PWM_OUTPUTS -r $PWM_RATE
fi
#
# Set disarmed, min and max PWM values
#
if [ $PWM_DISARMED != none ]
then
echo "[init] Set PWM disarmed: $PWM_DISARMED"
pwm disarmed -c $PWM_OUTPUTS -p $PWM_DISARMED
fi
if [ $PWM_MIN != none ]
then
echo "[init] Set PWM min: $PWM_MIN"
pwm min -c $PWM_OUTPUTS -p $PWM_MIN
fi
if [ $PWM_MAX != none ]
then
echo "[init] Set PWM max: $PWM_MAX"
pwm max -c $PWM_OUTPUTS -p $PWM_MAX
fi
fi
fi
ROMFS/px4fmu_common/init.d/rc.io
+16 -19
View File
@@ -1,23 +1,20 @@
#
# Start PX4IO interface (depends on orb, commander)
# Init PX4IO interface
#
if px4io start
then
#
# Allow PX4IO to recover from midair restarts.
# this is very unlikely, but quite safe and robust.
px4io recovery
#
# Disable px4io topic limiting
#
if [ $BOARD == fmuv1 ]
then
px4io limit 200
else
px4io limit 400
fi
else
# SOS
tone_alarm error
#
# Allow PX4IO to recover from midair restarts.
#
px4io recovery
#
# Adjust PX4IO update rate limit
#
set PX4IO_LIMIT 400
if hw_ver compare PX4FMU_V1
then
set PX4IO_LIMIT 200
fi
echo "[init] Set PX4IO update rate limit: $PX4IO_LIMIT Hz"
px4io limit $PX4IO_LIMIT
ROMFS/px4fmu_common/init.d/rc.logging
+6 -4
View File
@@ -1,14 +1,16 @@
#!nsh
#
# Initialise logging services.
# Initialize logging services.
#
if [ -d /fs/microsd ]
then
if [ $BOARD == fmuv1 ]
if hw_ver compare PX4FMU_V1
then
sdlog2 start -r 50 -a -b 16
echo "Start sdlog2 at 50Hz"
sdlog2 start -r 50 -a -b 8 -t
else
sdlog2 start -r 200 -a -b 16
echo "Start sdlog2 at 200Hz"
sdlog2 start -r 200 -a -b 16 -t
fi
fi
ROMFS/px4fmu_common/init.d/rc.mc_apps
+11
View File
@@ -0,0 +1,11 @@
#!nsh
#
# Standard apps for multirotors:
# att & pos estimator, att & pos control.
#
attitude_estimator_ekf start
position_estimator_inav start
mc_att_control start
mc_pos_control start
ROMFS/px4fmu_common/init.d/rc.mc_defaults
+43
View File
@@ -0,0 +1,43 @@
#!nsh
set VEHICLE_TYPE mc
if [ $DO_AUTOCONFIG == yes ]
then
param set MC_ROLL_P 7.0
param set MC_ROLLRATE_P 0.1
param set MC_ROLLRATE_I 0.0
param set MC_ROLLRATE_D 0.003
param set MC_PITCH_P 7.0
param set MC_PITCHRATE_P 0.1
param set MC_PITCHRATE_I 0.0
param set MC_PITCHRATE_D 0.003
param set MC_YAW_P 2.8
param set MC_YAWRATE_P 0.2
param set MC_YAWRATE_I 0.0
param set MC_YAWRATE_D 0.0
param set MC_YAW_FF 0.5
param set MPC_THR_MAX 1.0
param set MPC_THR_MIN 0.1
param set MPC_XY_P 1.0
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.02
param set MPC_XY_VEL_D 0.01
param set MPC_XY_VEL_MAX 5
param set MPC_XY_FF 0.5
param set MPC_Z_P 1.0
param set MPC_Z_VEL_P 0.1
param set MPC_Z_VEL_I 0.02
param set MPC_Z_VEL_D 0.0
param set MPC_Z_VEL_MAX 3
param set MPC_Z_FF 0.5
param set MPC_TILT_MAX 1.0
param set MPC_LAND_SPEED 1.0
param set MPC_LAND_TILT 0.3
fi
set PWM_RATE 400
set PWM_DISARMED 900
set PWM_MIN 1075
set PWM_MAX 2000
ROMFS/px4fmu_common/init.d/rc.multirotor
-39
View File
@@ -1,39 +0,0 @@
#!nsh
#
# Standard everything needed for multirotors except mixer, actuator output and mavlink
#
#
# Start the sensors and test them.
#
sh /etc/init.d/rc.sensors
#
# Start logging (depends on sensors)
#
sh /etc/init.d/rc.logging
#
# Start GPS interface (depends on orb)
#
gps start
#
# Start the attitude estimator
#
attitude_estimator_ekf start
#
# Start position estimator
#
position_estimator_inav start
#
# Start attitude control
#
multirotor_att_control start
#
# Start position control
#
multirotor_pos_control start
ROMFS/px4fmu_common/init.d/rc.sensors
+12 -15
View File
@@ -3,48 +3,45 @@
# Standard startup script for PX4FMU onboard sensor drivers.
#
#
# Start sensor drivers here.
#
ms5611 start
adc start
# mag might be external
# Mag might be external
if hmc5883 start
then
echo "using HMC5883"
echo "[init] Using HMC5883"
fi
if mpu6000 start
then
echo "using MPU6000"
echo "[init] Using MPU6000"
fi
if l3gd20 start
then
echo "using L3GD20(H)"
echo "[init] Using L3GD20(H)"
fi
if lsm303d start
if hw_ver compare PX4FMU_V2
then
set BOARD fmuv2
else
set BOARD fmuv1
if lsm303d start
then
echo "[init] Using LSM303D"
fi
fi
# Start airspeed sensors
if meas_airspeed start
then
echo "using MEAS airspeed sensor"
echo "[init] Using MEAS airspeed sensor"
else
if ets_airspeed start
then
echo "using ETS airspeed sensor (bus 3)"
echo "[init] Using ETS airspeed sensor (bus 3)"
else
if ets_airspeed start -b 1
then
echo "Using ETS airspeed sensor (bus 1)"
echo "[init] Using ETS airspeed sensor (bus 1)"
fi
fi
fi
ROMFS/px4fmu_common/init.d/rc.standalone
-13
View File
@@ -1,13 +0,0 @@
#!nsh
#
# Flight startup script for PX4FMU standalone configuration.
#
echo "[init] doing standalone PX4FMU startup..."
#
# Start the ORB
#
uorb start
echo "[init] startup done"
ROMFS/px4fmu_common/init.d/rc.usb
-33
View File
@@ -36,39 +36,6 @@ then
echo "Commander started"
fi
# Start px4io if present
if px4io start
then
echo "PX4IO driver started"
else
if fmu mode_serial
then
echo "FMU driver started"
fi
fi
# Start sensors
sh /etc/init.d/rc.sensors
# Start one of the estimators
if attitude_estimator_ekf status
then
echo "multicopter att filter running"
else
if att_pos_estimator_ekf status
then
echo "fixedwing att filter running"
else
attitude_estimator_ekf start
fi
fi
# Start GPS
if gps start
then
echo "GPS started"
fi
echo "MAVLink started, exiting shell.."
# Exit shell to make it available to MAVLink
ROMFS/px4fmu_common/init.d/rcS
+450 -303
View File
@@ -3,44 +3,44 @@
# PX4FMU startup script.
#
# Default to auto-start mode. An init script on the microSD card
# can change this to prevent automatic startup of the flight script.
# Default to auto-start mode.
#
set MODE autostart
set logfile /fs/microsd/bootlog.txt
set RC_FILE /fs/microsd/etc/rc.txt
set CONFIG_FILE /fs/microsd/etc/config.txt
set EXTRAS_FILE /fs/microsd/etc/extras.txt
set TUNE_OUT_ERROR ML<<CP4CP4CP4CP4CP4
#
# Try to mount the microSD card.
#
echo "[init] looking for microSD..."
echo "[init] Looking for microSD..."
if mount -t vfat /dev/mmcsd0 /fs/microsd
then
echo "[init] card mounted at /fs/microsd"
set LOG_FILE /fs/microsd/bootlog.txt
echo "[init] microSD card mounted at /fs/microsd"
# Start playing the startup tune
tone_alarm start
else
echo "[init] no microSD card found"
set LOG_FILE /dev/null
echo "[init] No microSD card found"
# Play SOS
tone_alarm error
fi
#
# Look for an init script on the microSD card.
# Disable autostart if the script found.
#
# To prevent automatic startup in the current flight mode,
# the script should set MODE to some other value.
#
if [ -f /fs/microsd/etc/rc ]
if [ -f $RC_FILE ]
then
echo "[init] reading /fs/microsd/etc/rc"
sh /fs/microsd/etc/rc
fi
# Also consider rc.txt files
if [ -f /fs/microsd/etc/rc.txt ]
then
echo "[init] reading /fs/microsd/etc/rc.txt"
sh /fs/microsd/etc/rc.txt
echo "[init] Executing init script: $RC_FILE"
sh $RC_FILE
set MODE custom
else
echo "[init] Init script not found: $RC_FILE"
fi
# if this is an APM build then there will be a rc.APM script
@@ -52,20 +52,19 @@ then
echo "[init] USB interface connected"
fi
echo "Running rc.APM"
echo "[init] Running rc.APM"
# if APM startup is successful then nsh will exit
sh /etc/init.d/rc.APM
fi
if [ $MODE == autostart ]
then
echo "[init] AUTOSTART mode"
#
# Start terminal
# Start CDC/ACM serial driver
#
if sercon
then
echo "USB connected"
fi
sercon
#
# Start the ORB (first app to start)
@@ -73,84 +72,146 @@ then
uorb start
#
# Load microSD params
# Load parameters
#
#if ramtron start
#then
# param select /ramtron/params
# if [ -f /ramtron/params ]
# then
# param load /ramtron/params
# fi
#else
param select /fs/microsd/params
if [ -f /fs/microsd/params ]
then
if param load /fs/microsd/params
then
echo "Parameters loaded"
else
echo "Parameter file corrupt - ignoring"
fi
fi
#fi
set PARAM_FILE /fs/microsd/params
if mtd start
then
set PARAM_FILE /fs/mtd_params
fi
param select $PARAM_FILE
if param load
then
echo "[init] Parameters loaded: $PARAM_FILE"
else
echo "[init] ERROR: Parameters loading failed: $PARAM_FILE"
fi
#
# Start system state indicator
#
if rgbled start
then
echo "Using external RGB Led"
echo "[init] Using external RGB Led"
else
if blinkm start
then
echo "[init] Using blinkm"
blinkm systemstate
fi
fi
#
# Start the Commander (needs to be this early for in-air-restarts)
# Set default values
#
commander start
set HIL no
set VEHICLE_TYPE none
set MIXER none
set USE_IO yes
set OUTPUT_MODE none
set PWM_OUTPUTS none
set PWM_RATE none
set PWM_DISARMED none
set PWM_MIN none
set PWM_MAX none
set MKBLCTRL_MODE none
set FMU_MODE pwm
set MAV_TYPE none
#
# Start the datamanager
# Set DO_AUTOCONFIG flag to use it in AUTOSTART scripts
#
dataman start
#
# Start the Navigator
#
navigator start
if param compare SYS_AUTOSTART 1000
if param compare SYS_AUTOCONFIG 1
then
sh /etc/init.d/1000_rc_fw_easystar.hil
set MODE custom
set DO_AUTOCONFIG yes
else
set DO_AUTOCONFIG no
fi
#
# Set parameters and env variables for selected AUTOSTART
#
if param compare SYS_AUTOSTART 0
then
echo "[init] Don't try to find autostart script"
else
sh /etc/init.d/rc.autostart
fi
#
# Override parameters from user configuration file
#
if [ -f $CONFIG_FILE ]
then
echo "[init] Reading config: $CONFIG_FILE"
sh $CONFIG_FILE
else
echo "[init] Config file not found: $CONFIG_FILE"
fi
#
# If autoconfig parameter was set, reset it and save parameters
#
if [ $DO_AUTOCONFIG == yes ]
then
param set SYS_AUTOCONFIG 0
param save
fi
if param compare SYS_AUTOSTART 1001
then
sh /etc/init.d/1001_rc_quad.hil
set MODE custom
fi
set IO_PRESENT no
if param compare SYS_AUTOSTART 1002
if [ $USE_IO == yes ]
then
sh /etc/init.d/1002_rc_fw_state.hil
set MODE custom
fi
#
# Check if PX4IO present and update firmware if needed
#
if [ -f /etc/extras/px4io-v2_default.bin ]
then
set IO_FILE /etc/extras/px4io-v2_default.bin
else
set IO_FILE /etc/extras/px4io-v1_default.bin
fi
if px4io checkcrc $IO_FILE
then
echo "[init] PX4IO CRC OK"
echo "PX4IO CRC OK" >> $LOG_FILE
if param compare SYS_AUTOSTART 1003
then
sh /etc/init.d/1003_rc_quad_+.hil
set MODE custom
fi
if param compare SYS_AUTOSTART 1004
then
sh /etc/init.d/1004_rc_fw_Rascal110.hil
set MODE custom
set IO_PRESENT yes
else
echo "[init] Trying to update"
echo "PX4IO Trying to update" >> $LOG_FILE
tone_alarm MLL32CP8MB
if px4io forceupdate 14662 $IO_FILE
then
usleep 500000
if px4io checkcrc $IO_FILE
then
echo "[init] PX4IO CRC OK, update successful"
echo "PX4IO CRC OK after updating" >> $LOG_FILE
tone_alarm MLL8CDE
set IO_PRESENT yes
else
echo "[init] ERROR: PX4IO update failed"
echo "PX4IO update failed" >> $LOG_FILE
tone_alarm $TUNE_OUT_ERROR
fi
else
echo "[init] ERROR: PX4IO update failed"
echo "PX4IO update failed" >> $LOG_FILE
tone_alarm $TUNE_OUT_ERROR
fi
fi
if [ $IO_PRESENT == no ]
then
echo "[init] ERROR: PX4IO not found"
tone_alarm $TUNE_OUT_ERROR
fi
fi
if param compare SYS_AUTOSTART 901
@@ -159,251 +220,337 @@ then
set MODE custom
fi
if [ $MODE != custom ]
#
# Set default output if not set
#
if [ $OUTPUT_MODE == none ]
then
# Try to get an USB console
if [ $USE_IO == yes ]
then
set OUTPUT_MODE io
else
set OUTPUT_MODE fmu
fi
fi
if [ $OUTPUT_MODE == io -a $IO_PRESENT != yes ]
then
# Need IO for output but it not present, disable output
set OUTPUT_MODE none
echo "[init] ERROR: PX4IO not found, disabling output"
# Avoid using ttyS0 for MAVLink on FMUv1
if hw_ver compare PX4FMU_V1
then
set FMU_MODE serial
fi
fi
if [ $OUTPUT_MODE == ardrone ]
then
set FMU_MODE gpio_serial
fi
if [ $HIL == yes ]
then
set OUTPUT_MODE hil
if hw_ver compare PX4FMU_V1
then
set FMU_MODE serial
fi
else
# Try to get an USB console if not in HIL mode
nshterm /dev/ttyACM0 &
fi
#
# Upgrade PX4IO firmware
#
if [ -f /etc/extras/px4io-v2_default.bin ]
then
set io_file /etc/extras/px4io-v2_default.bin
else
set io_file /etc/extras/px4io-v1_default.bin
fi
if px4io start
then
echo "PX4IO OK"
echo "PX4IO OK" >> $logfile
fi
if px4io checkcrc $io_file
#
# Start the Commander (needs to be this early for in-air-restarts)
#
commander start
#
# Start primary output
#
set TTYS1_BUSY no
# If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output
if [ $OUTPUT_MODE != none ]
then
echo "PX4IO CRC OK"
echo "PX4IO CRC OK" >> $logfile
else
echo "PX4IO CRC failure"
echo "PX4IO CRC failure" >> $logfile
tone_alarm MBABGP
if px4io forceupdate 14662 $io_file
if [ $OUTPUT_MODE == io ]
then
usleep 200000
echo "[init] Use PX4IO PWM as primary output"
if px4io start
then
echo "PX4IO restart OK"
echo "PX4IO restart OK" >> $logfile
tone_alarm MSPAA
echo "[init] PX4IO started"
sh /etc/init.d/rc.io
else
echo "PX4IO restart failed"
echo "PX4IO restart failed" >> $logfile
tone_alarm MNGGG
sh /etc/init.d/rc.error
echo "[init] ERROR: PX4IO start failed"
tone_alarm $TUNE_OUT_ERROR
fi
else
echo "PX4IO update failed"
echo "PX4IO update failed" >> $logfile
tone_alarm MNGGG
fi
fi
#
# Check if auto-setup from one of the standard scripts is wanted
# SYS_AUTOSTART = 0 means no autostart (default)
#
if param compare SYS_AUTOSTART 8
then
sh /etc/init.d/08_ardrone
set MODE custom
fi
if param compare SYS_AUTOSTART 9
then
sh /etc/init.d/09_ardrone_flow
set MODE custom
fi
if param compare SYS_AUTOSTART 10
then
sh /etc/init.d/10_dji_f330
set MODE custom
fi
if param compare SYS_AUTOSTART 11
then
sh /etc/init.d/11_dji_f450
set MODE custom
fi
if param compare SYS_AUTOSTART 12
then
set MIXER /etc/mixers/FMU_hex_x.mix
sh /etc/init.d/12-13_hex
set MODE custom
fi
if param compare SYS_AUTOSTART 13
then
set MIXER /etc/mixers/FMU_hex_+.mix
sh /etc/init.d/12-13_hex
set MODE custom
fi
if param compare SYS_AUTOSTART 15
then
sh /etc/init.d/15_tbs_discovery
set MODE custom
fi
if param compare SYS_AUTOSTART 16
then
sh /etc/init.d/16_3dr_iris
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame
if param compare SYS_AUTOSTART 17
then
set MKBLCTRL_MODE no
set MKBLCTRL_FRAME x
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame
if param compare SYS_AUTOSTART 18
then
set MKBLCTRL_MODE no
set MKBLCTRL_FRAME +
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing
if param compare SYS_AUTOSTART 19
then
set MKBLCTRL_MODE yes
set MKBLCTRL_FRAME x
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing
if param compare SYS_AUTOSTART 20
then
set MKBLCTRL_MODE yes
set MKBLCTRL_FRAME +
sh /etc/init.d/rc.custom_dji_f330_mkblctrl
set MODE custom
fi
# PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame
if param compare SYS_AUTOSTART 21
then
set FRAME_GEOMETRY x
set ESC_MAKER afro
sh /etc/init.d/rc.custom_io_esc
set MODE custom
fi
# PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame
if param compare SYS_AUTOSTART 22
then
set FRAME_GEOMETRY w
sh /etc/init.d/rc.custom_io_esc
set MODE custom
fi
if param compare SYS_AUTOSTART 30
then
sh /etc/init.d/30_io_camflyer
set MODE custom
fi
if param compare SYS_AUTOSTART 31
then
sh /etc/init.d/31_io_phantom
set MODE custom
fi
if param compare SYS_AUTOSTART 32
then
sh /etc/init.d/32_skywalker_x5
set MODE custom
fi
if param compare SYS_AUTOSTART 40
then
sh /etc/init.d/40_io_segway
set MODE custom
fi
if param compare SYS_AUTOSTART 100
then
sh /etc/init.d/100_mpx_easystar
set MODE custom
fi
if param compare SYS_AUTOSTART 101
then
sh /etc/init.d/101_hk_bixler
set MODE custom
fi
if param compare SYS_AUTOSTART 102
then
sh /etc/init.d/102_3dr_skywalker
set MODE custom
fi
if param compare SYS_AUTOSTART 900
then
sh /etc/init.d/900_bottle_drop_test
set MODE custom
fi
# Start any custom extensions that might be missing
if [ -f /fs/microsd/etc/rc.local ]
then
sh /fs/microsd/etc/rc.local
fi
# If none of the autostart scripts triggered, get a minimal setup
if [ $MODE == autostart ]
then
# Telemetry port is on both FMU boards ttyS1
# but the AR.Drone motors can be get 'flashed'
# if starting MAVLink on them - so do not
# start it as default (default link: USB)
# Start commander
commander start
# Start px4io if present
if px4io detect
if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == ardrone ]
then
px4io start
else
if fmu mode_serial
echo "[init] Use FMU as primary output"
if fmu mode_$FMU_MODE
then
echo "FMU driver (no PWM) started"
echo "[init] FMU mode_$FMU_MODE started"
else
echo "[init] ERROR: FMU mode_$FMU_MODE start failed"
tone_alarm $TUNE_OUT_ERROR
fi
if hw_ver compare PX4FMU_V1
then
if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ]
then
set TTYS1_BUSY yes
fi
if [ $FMU_MODE == pwm_gpio -o $OUTPUT_MODE == ardrone ]
then
set TTYS1_BUSY yes
fi
fi
fi
if [ $OUTPUT_MODE == mkblctrl ]
then
echo "[init] Use MKBLCTRL as primary output"
set MKBLCTRL_ARG ""
if [ $MKBLCTRL_MODE == x ]
then
set MKBLCTRL_ARG "-mkmode x"
fi
if [ $MKBLCTRL_MODE == + ]
then
set MKBLCTRL_ARG "-mkmode +"
fi
if mkblctrl $MKBLCTRL_ARG
then
echo "[init] MKBLCTRL started"
else
echo "[init] ERROR: MKBLCTRL start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
if [ $OUTPUT_MODE == hil ]
then
echo "[init] Use HIL as primary output"
if hil mode_port2_pwm8
then
echo "[init] HIL output started"
else
echo "[init] ERROR: HIL output start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
#
# Start IO or FMU for RC PPM input if needed
#
if [ $IO_PRESENT == yes ]
then
if [ $OUTPUT_MODE != io ]
then
if px4io start
then
echo "[init] PX4IO started"
sh /etc/init.d/rc.io
else
echo "[init] ERROR: PX4IO start failed"
tone_alarm $TUNE_OUT_ERROR
fi
fi
else
if [ $OUTPUT_MODE != fmu -a $OUTPUT_MODE != ardrone ]
then
if fmu mode_$FMU_MODE
then
echo "[init] FMU mode_$FMU_MODE started"
else
echo "[init] ERROR: FMU mode_$FMU_MODE start failed"
tone_alarm $TUNE_OUT_ERROR
fi
# Start sensors
sh /etc/init.d/rc.sensors
if hw_ver compare PX4FMU_V1
then
if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ]
then
set TTYS1_BUSY yes
fi
if [ $FMU_MODE == pwm_gpio -o $OUTPUT_MODE == ardrone ]
then
set TTYS1_BUSY yes
fi
fi
fi
fi
fi
# Start one of the estimators
attitude_estimator_ekf start
#
# MAVLink
#
set EXIT_ON_END no
# Start GPS
if [ $HIL == yes ]
then
sleep 1
mavlink start -b 230400 -d /dev/ttyACM0
usleep 5000
else
if [ $TTYS1_BUSY == yes ]
then
# Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else
mavlink start -d /dev/ttyS0
usleep 5000
# Exit from nsh to free port for mavlink
set EXIT_ON_END yes
else
# Start MAVLink on default port: ttyS1
mavlink start
usleep 5000
fi
fi
#
# Start the datamanager
#
dataman start
#
# Start the navigator
#
navigator start
#
# Sensors, Logging, GPS
#
echo "[init] Start sensors"
sh /etc/init.d/rc.sensors
if [ $HIL == no ]
then
echo "[init] Start logging"
sh /etc/init.d/rc.logging
echo "[init] Start GPS"
gps start
fi
#
# Start up ARDrone Motor interface
#
if [ $OUTPUT_MODE == ardrone ]
then
ardrone_interface start -d /dev/ttyS1
fi
#
# Fixed wing setup
#
if [ $VEHICLE_TYPE == fw ]
then
echo "[init] Vehicle type: FIXED WING"
if [ $MIXER == none ]
then
# Set default mixer for fixed wing if not defined
set MIXER FMU_AERT
fi
if [ $MAV_TYPE == none ]
then
# Use MAV_TYPE = 1 (fixed wing) if not defined
set MAV_TYPE 1
fi
param set MAV_TYPE $MAV_TYPE
# Load mixer and configure outputs
sh /etc/init.d/rc.interface
# Start standard fixedwing apps
sh /etc/init.d/rc.fw_apps
fi
#
# Multicopters setup
#
if [ $VEHICLE_TYPE == mc ]
then
echo "[init] Vehicle type: MULTICOPTER"
if [ $MIXER == none ]
then
echo "Default mixer for multicopter not defined"
fi
if [ $MAV_TYPE == none ]
then
# Use mixer to detect vehicle type
if [ $MIXER == FMU_quad_x -o $MIXER == FMU_quad_+ ]
then
set MAV_TYPE 2
fi
if [ $MIXER == FMU_quad_w ]
then
set MAV_TYPE 2
fi
if [ $MIXER == FMU_hexa_x -o $MIXER == FMU_hexa_+ ]
then
set MAV_TYPE 13
fi
if [ $MIXER == hexa_cox ]
then
set MAV_TYPE 13
fi
if [ $MIXER == FMU_octo_x -o $MIXER == FMU_octo_+ ]
then
set MAV_TYPE 14
fi
if [ $MIXER == FMU_octo_cox ]
then
set MAV_TYPE 14
fi
fi
# Still no MAV_TYPE found
if [ $MAV_TYPE == none ]
then
echo "Unknown MAV_TYPE"
else
param set MAV_TYPE $MAV_TYPE
fi
# Load mixer and configure outputs
sh /etc/init.d/rc.interface
# Start standard multicopter apps
sh /etc/init.d/rc.mc_apps
fi
#
# Generic setup (autostart ID not found)
#
if [ $VEHICLE_TYPE == none ]
then
echo "[init] Vehicle type: No autostart ID found"
fi
# Start any custom addons
if [ -f $EXTRAS_FILE ]
then
echo "[init] Starting addons script: $EXTRAS_FILE"
sh $EXTRAS_FILE
else
echo "[init] Addons script not found: $EXTRAS_FILE"
fi
if [ $EXIT_ON_END == yes ]
then
exit
fi
# End of autostart
ROMFS/px4fmu_common/logging/conv.zip
BIN
View File
Binary file not shown.
ROMFS/px4fmu_common/mixers/FMU_FX79.mix
Executable
+72
View File
@@ -0,0 +1,72 @@
FX-79 Delta-wing mixer for PX4FMU
=================================
Designed for FX-79.
TODO (sjwilks): Add mixers for flaps.
This file defines mixers suitable for controlling a delta wing aircraft using
PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
assumed to be unused.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
See the README for more information on the scaler format.
Elevon mixers
-------------
Three scalers total (output, roll, pitch).
On the assumption that the two elevon servos are physically reversed, the pitch
input is inverted between the two servos.
The scaling factor for roll inputs is adjusted to implement differential travel
for the elevons.
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 5000 8000 0 -10000 10000
S: 0 1 8000 8000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 8000 5000 0 -10000 10000
S: 0 1 -8000 -8000 0 -10000 10000
Output 2
--------
This mixer is empty.
Z:
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000
Gimbal / flaps / payload mixer for last four channels
-----------------------------------------------------
M: 1
O: 10000 10000 0 -10000 10000
S: 0 4 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 5 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 6 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000
ROMFS/px4fmu_common/mixers/FMU_Q.mix
+4 -4
View File
@@ -25,13 +25,13 @@ for the elevons.
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -5000 -8000 0 -10000 10000
S: 0 1 8000 8000 0 -10000 10000
S: 0 0 -8000 -8000 0 -10000 10000
S: 0 1 6000 6000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -8000 -5000 0 -10000 10000
S: 0 1 -8000 -8000 0 -10000 10000
S: 0 0 -8000 -8000 0 -10000 10000
S: 0 1 -6000 -6000 0 -10000 10000
Output 2
--------
ROMFS/px4fmu_common/mixers/FMU_X5.mix
+5 -6
View File
@@ -23,13 +23,13 @@ for the elevons.
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -3000 -5000 0 -10000 10000
S: 0 1 -5000 -5000 0 -10000 10000
S: 0 0 -8000 -8000 0 -10000 10000
S: 0 1 6000 6000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -5000 -3000 0 -10000 10000
S: 0 1 5000 5000 0 -10000 10000
S: 0 0 -8000 -8000 0 -10000 10000
S: 0 1 -6000 -6000 0 -10000 10000
Output 2
--------
@@ -48,7 +48,7 @@ M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000
Gimbal / payload mixer for last four channels
Gimbal / flaps / payload mixer for last four channels
-----------------------------------------------------
M: 1
@@ -66,4 +66,3 @@ S: 0 6 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000
ROMFS/px4fmu_common/mixers/FMU_hex_+.mix
-18
View File
@@ -1,18 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a hexacopter in the + configuration. All controls
are mixed 100%.
R: 6+ 10000 10000 10000 0
Gimbal / payload mixer for last two channels
-----------------------------------------------------
M: 1
O: 10000 10000 0 -10000 10000
S: 0 6 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000
ROMFS/px4fmu_common/mixers/FMU_hex_x.mix
-18
View File
@@ -1,18 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a hexacopter in the X configuration. All controls
are mixed 100%.
R: 6x 10000 10000 10000 0
Gimbal / payload mixer for last two channels
-----------------------------------------------------
M: 1
O: 10000 10000 0 -10000 10000
S: 0 6 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000
ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix
+3
View File
@@ -0,0 +1,3 @@
# Hexa +
R: 6+ 10000 10000 10000 0
ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix
+3
View File
@@ -0,0 +1,3 @@
# Hexa X
R: 6x 10000 10000 10000 0
ROMFS/px4fmu_common/mixers/FMU_octo_+.mix
+1 -5
View File
@@ -1,7 +1,3 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a octocopter in the + configuration. All controls
are mixed 100%.
# Octo +
R: 8+ 10000 10000 10000 0
ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix
+1 -5
View File
@@ -1,7 +1,3 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a Coaxial Octocopter in the X configuration. All controls
are mixed 100%.
# Octo coaxial
R: 8c 10000 10000 10000 0
ROMFS/px4fmu_common/mixers/FMU_octo_x.mix
+1 -5
View File
@@ -1,7 +1,3 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a octocopter in the X configuration. All controls
are mixed 100%.
# Octo X
R: 8x 10000 10000 10000 0
ROMFS/px4fmu_common/mixers/README
-154
View File
@@ -1,154 +0,0 @@
PX4 mixer definitions
=====================
Files in this directory implement example mixers that can be used as a basis
for customisation, or for general testing purposes.
Mixer basics
------------
Mixers combine control values from various sources (control tasks, user inputs,
etc.) and produce output values suitable for controlling actuators; servos,
motors, switches and so on.
An actuator derives its value from the combination of one or more control
values. Each of the control values is scaled according to the actuator's
configuration and then combined to produce the actuator value, which may then be
further scaled to suit the specific output type.
Internally, all scaling is performed using floating point values. Inputs and
outputs are clamped to the range -1.0 to 1.0.
control control control
| | |
v v v
scale scale scale
| | |
| v |
+-------> mix <------+
|
scale
|
v
out
Scaling
-------
Basic scalers provide linear scaling of the input to the output.
Each scaler allows the input value to be scaled independently for inputs
greater/less than zero. An offset can be applied to the output, and lower and
upper boundary constraints can be applied. Negative scaling factors cause the
output to be inverted (negative input produces positive output).
Scaler pseudocode:
if (input < 0)
output = (input * NEGATIVE_SCALE) + OFFSET
else
output = (input * POSITIVE_SCALE) + OFFSET
if (output < LOWER_LIMIT)
output = LOWER_LIMIT
if (output > UPPER_LIMIT)
output = UPPER_LIMIT
Syntax
------
Mixer definitions are text files; lines beginning with a single capital letter
followed by a colon are significant. All other lines are ignored, meaning that
explanatory text can be freely mixed with the definitions.
Each file may define more than one mixer; the allocation of mixers to actuators
is specific to the device reading the mixer definition, and the number of
actuator outputs generated by a mixer is specific to the mixer.
A mixer begins with a line of the form
<tag>: <mixer arguments>
The tag selects the mixer type; 'M' for a simple summing mixer, 'R' for a
multirotor mixer, etc.
Null Mixer
..........
A null mixer consumes no controls and generates a single actuator output whose
value is always zero. Typically a null mixer is used as a placeholder in a
collection of mixers in order to achieve a specific pattern of actuator outputs.
The null mixer definition has the form:
Z:
Simple Mixer
............
A simple mixer combines zero or more control inputs into a single actuator
output. Inputs are scaled, and the mixing function sums the result before
applying an output scaler.
A simple mixer definition begins with:
M: <control count>
O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
If <control count> is zero, the sum is effectively zero and the mixer will
output a fixed value that is <offset> constrained by <lower limit> and <upper
limit>.
The second line defines the output scaler with scaler parameters as discussed
above. Whilst the calculations are performed as floating-point operations, the
values stored in the definition file are scaled by a factor of 10000; i.e. an
offset of -0.5 is encoded as -5000.
The definition continues with <control count> entries describing the control
inputs and their scaling, in the form:
S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
The <group> value identifies the control group from which the scaler will read,
and the <index> value an offset within that group. These values are specific to
the device reading the mixer definition.
When used to mix vehicle controls, mixer group zero is the vehicle attitude
control group, and index values zero through three are normally roll, pitch,
yaw and thrust respectively.
The remaining fields on the line configure the control scaler with parameters as
discussed above. Whilst the calculations are performed as floating-point
operations, the values stored in the definition file are scaled by a factor of
10000; i.e. an offset of -0.5 is encoded as -5000.
Multirotor Mixer
................
The multirotor mixer combines four control inputs (roll, pitch, yaw, thrust)
into a set of actuator outputs intended to drive motor speed controllers.
The mixer definition is a single line of the form:
R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband>
The supported geometries include:
4x - quadrotor in X configuration
4+ - quadrotor in + configuration
6x - hexcopter in X configuration
6+ - hexcopter in + configuration
8x - octocopter in X configuration
8+ - octocopter in + configuration
Each of the roll, pitch and yaw scale values determine scaling of the roll,
pitch and yaw controls relative to the thrust control. Whilst the calculations
are performed as floating-point operations, the values stored in the definition
file are scaled by a factor of 10000; i.e. an factor of 0.5 is encoded as 5000.
Roll, pitch and yaw inputs are expected to range from -1.0 to 1.0, whilst the
thrust input ranges from 0.0 to 1.0. Output for each actuator is in the
range -1.0 to 1.0.
In the case where an actuator saturates, all actuator values are rescaled so that
the saturating actuator is limited to 1.0.
ROMFS/px4fmu_common/mixers/hexa_cox.mix
+3
View File
@@ -0,0 +1,3 @@
# Hexa coaxial
R: 6c 10000 10000 10000 0
ROMFS/px4fmu_logging/init.d/rcS
-88
View File
@@ -1,88 +0,0 @@
#!nsh
#
# PX4FMU startup script for logging purposes
#
#
# Try to mount the microSD card.
#
echo "[init] looking for microSD..."
if mount -t vfat /dev/mmcsd0 /fs/microsd
then
echo "[init] card mounted at /fs/microsd"
# Start playing the startup tune
tone_alarm start
else
echo "[init] no microSD card found"
# Play SOS
tone_alarm error
fi
uorb start
#
# Start sensor drivers here.
#
ms5611 start
adc start
# mag might be external
if hmc5883 start
then
echo "using HMC5883"
fi
if mpu6000 start
then
echo "using MPU6000"
fi
if l3gd20 start
then
echo "using L3GD20(H)"
fi
if lsm303d start
then
set BOARD fmuv2
else
set BOARD fmuv1
fi
# Start airspeed sensors
if meas_airspeed start
then
echo "using MEAS airspeed sensor"
else
if ets_airspeed start
then
echo "using ETS airspeed sensor (bus 3)"
else
if ets_airspeed start -b 1
then
echo "Using ETS airspeed sensor (bus 1)"
fi
fi
fi
#
# Start the sensor collection task.
# IMPORTANT: this also loads param offsets
# ALWAYS start this task before the
# preflight_check.
#
if sensors start
then
echo "SENSORS STARTED"
fi
sdlog2 start -r 250 -e -b 16
if sercon
then
echo "[init] USB interface connected"
# Try to get an USB console
nshterm /dev/ttyACM0 &
fi
ROMFS/px4fmu_logging/logging/conv.zip
BIN
View File
Binary file not shown.
ROMFS/px4fmu_test/init.d/rcS
+66 -1
View File
@@ -2,6 +2,7 @@
#
# PX4FMU startup script for test hackery.
#
uorb start
if sercon
then
@@ -9,4 +10,68 @@ then
# Try to get an USB console
nshterm /dev/ttyACM0 &
fi
fi
#
# Try to mount the microSD card.
#
echo "[init] looking for microSD..."
if mount -t vfat /dev/mmcsd0 /fs/microsd
then
echo "[init] card mounted at /fs/microsd"
# Start playing the startup tune
tone_alarm start
else
echo "[init] no microSD card found"
# Play SOS
tone_alarm error
fi
#
# Start a minimal system
#
if [ -f /etc/extras/px4io-v2_default.bin ]
then
set io_file /etc/extras/px4io-v2_default.bin
else
set io_file /etc/extras/px4io-v1_default.bin
fi
if px4io start
then
echo "PX4IO OK"
fi
if px4io checkcrc $io_file
then
echo "PX4IO CRC OK"
else
echo "PX4IO CRC failure"
tone_alarm MBABGP
if px4io forceupdate 14662 $io_file
then
usleep 500000
if px4io start
then
echo "PX4IO restart OK"
tone_alarm MSPAA
else
echo "PX4IO restart failed"
tone_alarm MNGGG
sleep 5
reboot
fi
else
echo "PX4IO update failed"
tone_alarm MNGGG
fi
fi
#
# The presence of this file suggests we're running a mount stress test
#
if [ -f /fs/microsd/mount_test_cmds.txt ]
then
tests mount
fi