Hoist the ADC and CAN board-specific pieces.

apps/drivers/boards/px4fmu/px4fmu_adc.c

@@ -1,9 +1,6 @@
-/************************************************************************************
+/****************************************************************************
- * configs/stm3240g-eval/src/up_adc.c
- * arch/arm/src/board/up_adc.c
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -15,7 +12,7 @@
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
+ * 3. Neither the name PX4 nor the names of its contributors may be
  *    used to endorse or promote products derived from this software
  *    without specific prior written permission.
  *
@@ -32,7 +29,13 @@
  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  *
- ************************************************************************************/
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_adc.c
+ *
+ * Board-specific ADC functions.
+ */
 
 /************************************************************************************
  * Included Files
@@ -50,35 +53,8 @@
 #include "chip.h"
 #include "up_arch.h"
 
-//#include "stm32_pwm.h"
 #include "stm32_adc.h"
-#include "px4fmu-internal.h"
+#include "px4fmu_internal.h"
-
-#ifdef CONFIG_ADC
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/* Configuration ************************************************************/
-/* Up to 3 ADC interfaces are supported */
-
-#if STM32_NADC < 3
-#  undef CONFIG_STM32_ADC3
-#endif
-
-#if STM32_NADC < 2
-#  undef CONFIG_STM32_ADC2
-#endif
-
-#if STM32_NADC < 1
-#  undef CONFIG_STM32_ADC3
-#endif
-
-#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3)
-#ifndef CONFIG_STM32_ADC3
-#  warning "Channel information only available for ADC3"
-#endif
 
 #define ADC3_NCHANNELS 4
 
@@ -116,7 +92,6 @@ static const uint32_t g_pinlist[ADC3_NCHANNELS]  = {GPIO_ADC3_IN10, GPIO_ADC3_IN
 
 int adc_devinit(void)
 {
-#ifdef CONFIG_STM32_ADC3
 	static bool initialized = false;
 	struct adc_dev_s *adc[ADC3_NCHANNELS];
 	int ret;
@@ -164,10 +139,4 @@ int adc_devinit(void)
 	}
 
 	return OK;
-#else
-	return -ENOSYS;
-#endif
 }
-
-#endif /* CONFIG_STM32_ADC || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */
-#endif /* CONFIG_ADC */

apps/drivers/boards/px4fmu/px4fmu_can.c

@@ -1,9 +1,6 @@
-/************************************************************************************
+/****************************************************************************
- * configs/px4fmu/src/up_can.c
- * arch/arm/src/board/up_can.c
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -15,7 +12,7 @@
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
+ * 3. Neither the name PX4 nor the names of its contributors may be
  *    used to endorse or promote products derived from this software
  *    without specific prior written permission.
  *
@@ -32,7 +29,14 @@
  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  *
- ************************************************************************************/
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_can.c
+ *
+ * Board-specific CAN functions.
+ */
+
 
 /************************************************************************************
  * Included Files
@@ -51,9 +55,7 @@
 
 #include "stm32.h"
 #include "stm32_can.h"
-#include "px4fmu-internal.h"
+#include "px4fmu_internal.h"
-
-#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
 
 /************************************************************************************
  * Pre-processor Definitions
@@ -138,5 +140,3 @@ int can_devinit(void)
 
   return OK;
 }
-
-#endif /* CONFIG_STM32_CAN || CONFIG_STM32_CAN2 || CONFIG_STM32_CAN3 */

apps/drivers/boards/px4fmu/px4fmu_init.c

@@ -63,7 +63,6 @@
 #include "px4fmu_internal.h"
 #include "stm32_uart.h"
 
-#include <arch/board/up_adc.h>
 #include <arch/board/board.h>
 #include <arch/board/drv_led.h>
 #include <arch/board/drv_eeprom.h>
@@ -98,6 +97,8 @@
  * Protected Functions
  ****************************************************************************/
 
+extern int adc_devinit(void);
+
 /****************************************************************************
  * Public Functions
  ****************************************************************************/

apps/sensors/sensors.cpp

@@ -59,8 +59,6 @@
 #include <drivers/drv_mag.h>
 #include <drivers/drv_baro.h>
 
-#include <arch/board/up_adc.h>
-
 #include <systemlib/systemlib.h>
 #include <systemlib/param/param.h>
 #include <systemlib/err.h>

nuttx/configs/px4fmu/include/up_adc.h

@@ -1,60 +0,0 @@
-/************************************************************************************
- * configs/stm3240g-eval/src/up_adc.c
- * arch/arm/src/board/up_adc.c
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-
-#ifdef CONFIG_ADC
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: adc_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/adc.
- *
- ************************************************************************************/
-
-int adc_devinit(void);
-
-#endif /* CONFIG_ADC */

nuttx/configs/px4fmu/src/Makefile

@@ -44,14 +44,6 @@ CSRCS		= up_leds.c \
 		  drv_gpio.c \
 		  drv_led.c drv_eeprom.c 
 
-ifeq ($(CONFIG_ADC),y)
-CSRCS		+= up_adc.c
-endif
-
-ifeq ($(CONFIG_CAN),y)
-CSRCS		+= up_can.c
-endif
-
 COBJS		= $(CSRCS:.c=$(OBJEXT))
 
 SRCS		= $(ASRCS) $(CSRCS)