Merge remote-tracking branch 'origin/main' into pr-spacecraft-allocator-and-board

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -16,10 +16,6 @@ param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 1
 param set-default SENS_EN_MAGSIM 1
 
-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 # Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 1

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -16,12 +16,6 @@ param set-default SENS_EN_BAROSIM 1
 param set-default SENS_EN_MAGSIM 1
 param set-default SENS_EN_ARSPDSIM 1
 
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
@@ -33,18 +27,19 @@ param set-default SIH_KDV 0.2
 param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
 param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
 
-
 param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
 
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
 param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
 param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS1_TYPE 3  # elevator
 param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
 param set-default PWM_MAIN_FUNC1 201
 param set-default PWM_MAIN_FUNC2 202
 param set-default PWM_MAIN_FUNC3 203

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -28,10 +28,6 @@ param set-default MC_PITCH_P 5
 
 param set-default MAV_TYPE 19
 
-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2

ROMFS/px4fmu_common/init.d-posix/airframes/10043_sihsim_standard_vtol

@@ -0,0 +1,96 @@
+#!/bin/sh
+#
+# @name SIH Standard VTOL
+#
+# @type Simulation
+# @class VTOL
+#
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Ailerons (single channel)
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=standard_vtol}
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 1
+
+param set-default EKF2_GPS_DELAY 0
+
+param set-default VT_TYPE 2
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR0_PX 0.2
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_PX -0.2
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_ROTOR2_PX 0.2
+param set-default CA_ROTOR2_PY -0.2
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.2
+param set-default CA_ROTOR3_PY 0.2
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_PX -0.3
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 10
+param set-default FW_AIRSPD_MAX 12
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 201
+param set-default PWM_MAIN_FUNC6 202
+param set-default PWM_MAIN_FUNC7 203
+param set-default PWM_MAIN_FUNC8 105
+
+param set-default MAV_TYPE 22
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+# param set-default SYS_HITL 2
+
+param set-default SENS_DPRES_OFF 0.001
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.2
+
+# sih as standard vtol
+param set SIH_VEHICLE_TYPE 3

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -109,6 +109,7 @@ px4_add_romfs_files(
 	10040_sihsim_quadx
 	10041_sihsim_airplane
 	10042_sihsim_xvert
+	10043_sihsim_standard_vtol
 
 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2