RoverAttitudeSetpoint et al - whitespace (#25545)

* RoverAttitudeSetpoint - whitespace

* Format RoverAttitudeStatus.msg for consistency

* Format RoverPositionSetpoint.msg for consistency

* Format msg/RoverRateSetpoint.msg for consistency

* Format msg/RoverRateStatus.msg for consistency

* Format msg/RoverSpeedSetpoint.msg for consistency

* Reformat RoverSpeedStatus.msg for consistency

* Fix formatting of pid_yaw_rate_integral field

* Fix formatting in RoverSteeringSetpoint.msg

* Fix formatting in RoverThrottleSetpoint.msg

* Apply suggestions from code review
This commit is contained in:
Hamish Willee 2025-09-18 15:59:54 +10:00 committed by GitHub
parent 78d602e68a
commit 0303d36e60
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
9 changed files with 32 additions and 32 deletions

View File

@ -1,4 +1,4 @@
# Rover Attitude Setpoint # Rover Attitude Setpoint
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 yaw_setpoint # [rad] [@range -inf, inf] [@frame NED] Yaw setpoint float32 yaw_setpoint # [rad] [@range -inf, inf] [@frame NED] Yaw setpoint

View File

@ -1,5 +1,5 @@
# Rover Attitude Status # Rover Attitude Status
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 measured_yaw # [rad] [@range -pi, pi] [@frame NED]Measured yaw float32 measured_yaw # [rad] [@range -pi, pi] [@frame NED]Measured yaw
float32 adjusted_yaw_setpoint # [rad] [@range -pi, pi] [@frame NED] Yaw setpoint that is being tracked (Applied slew rates) float32 adjusted_yaw_setpoint # [rad] [@range -pi, pi] [@frame NED] Yaw setpoint that is being tracked (Applied slew rates)

View File

@ -1,8 +1,8 @@
# Rover Position Setpoint # Rover Position Setpoint
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32[2] position_ned # [m] [@range -inf, inf] [@frame NED] Target position float32[2] position_ned # [m] [@range -inf, inf] [@frame NED] Target position
float32[2] start_ned # [m] [@range -inf, inf] [@frame NED] [@invalid NaN Defaults to vehicle position] Start position which specifies a line for the rover to track float32[2] start_ned # [m] [@range -inf, inf] [@frame NED] [@invalid NaN Defaults to vehicle position] Start position which specifies a line for the rover to track
float32 cruising_speed # [m/s] [@range 0, inf] [@invalid NaN Defaults to maximum speed] Cruising speed float32 cruising_speed # [m/s] [@range 0, inf] [@invalid NaN Defaults to maximum speed] Cruising speed
float32 arrival_speed # [m/s] [@range 0, inf] [@invalid NaN Defaults to 0] Speed the rover should arrive at the target with float32 arrival_speed # [m/s] [@range 0, inf] [@invalid NaN Defaults to 0] Speed the rover should arrive at the target with
float32 yaw # [rad] [@range -pi,pi] [@frame NED] [@invalid NaN Defaults to vehicle yaw] Mecanum only: Specify vehicle yaw during travel float32 yaw # [rad] [@range -pi,pi] [@frame NED] [@invalid NaN Defaults to vehicle yaw] Mecanum only: Specify vehicle yaw during travel

View File

@ -1,4 +1,4 @@
# Rover Rate setpoint # Rover Rate setpoint
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 yaw_rate_setpoint # [rad/s] [@range -inf, inf] [@frame NED] Yaw rate setpoint float32 yaw_rate_setpoint # [rad/s] [@range -inf, inf] [@frame NED] Yaw rate setpoint

View File

@ -1,6 +1,6 @@
# Rover Rate Status # Rover Rate Status
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 measured_yaw_rate # [rad/s] [@range -inf, inf] [@frame NED] Measured yaw rate float32 measured_yaw_rate # [rad/s] [@range -inf, inf] [@frame NED] Measured yaw rate
float32 adjusted_yaw_rate_setpoint # [rad/s] [@range -inf, inf] [@frame NED] Yaw rate setpoint that is being tracked (Applied slew rates) float32 adjusted_yaw_rate_setpoint # [rad/s] [@range -inf, inf] [@frame NED] Yaw rate setpoint that is being tracked (Applied slew rates)
float32 pid_yaw_rate_integral # [] [@range -1, 1] Integral of the PID for the closed loop yaw rate controller float32 pid_yaw_rate_integral # [-] [@range -1, 1] Integral of the PID for the closed loop yaw rate controller

View File

@ -1,5 +1,5 @@
# Rover Speed Setpoint # Rover Speed Setpoint
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 speed_body_x # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Speed setpoint in body x direction float32 speed_body_x # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Speed setpoint in body x direction
float32 speed_body_y # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Speed setpoint in body y direction float32 speed_body_y # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Speed setpoint in body y direction

View File

@ -1,9 +1,9 @@
# Rover Velocity Status # Rover Velocity Status
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 measured_speed_body_x # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Measured speed in body x direction float32 measured_speed_body_x # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Measured speed in body x direction
float32 adjusted_speed_body_x_setpoint # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Speed setpoint in body x direction that is being tracked (Applied slew rates) float32 adjusted_speed_body_x_setpoint # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Speed setpoint in body x direction that is being tracked (Applied slew rates)
float32 pid_throttle_body_x_integral # [] [@range -1, 1] Integral of the PID for the closed loop controller of the speed in body x direction float32 pid_throttle_body_x_integral # [-] [@range -1, 1] Integral of the PID for the closed loop controller of the speed in body x direction
float32 measured_speed_body_y # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Measured speed in body y direction float32 measured_speed_body_y # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Measured speed in body y direction
float32 adjusted_speed_body_y_setpoint # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Speed setpoint in body y direction that is being tracked (Applied slew rates) float32 adjusted_speed_body_y_setpoint # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Speed setpoint in body y direction that is being tracked (Applied slew rates)
float32 pid_throttle_body_y_integral # [] [@range -1, 1] [@invalid NaN If not mecanum] Mecanum only: Integral of the PID for the closed loop controller of the speed in body y direction float32 pid_throttle_body_y_integral # [-] [@range -1, 1] [@invalid NaN If not mecanum] Mecanum only: Integral of the PID for the closed loop controller of the speed in body y direction

View File

@ -1,4 +1,4 @@
# Rover Steering setpoint # Rover Steering setpoint
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 normalized_steering_setpoint # [@range -1 (Left), 1 (Right)] [@frame Body] Ackermann: Normalized steering angle, Differential/Mecanum: Normalized speed difference between the left and right wheels float32 normalized_steering_setpoint # [-] [@range -1 (Left), 1 (Right)] [@frame Body] Ackermann: Normalized steering angle, Differential/Mecanum: Normalized speed difference between the left and right wheels

View File

@ -1,5 +1,5 @@
# Rover Throttle setpoint # Rover Throttle setpoint
uint64 timestamp # [us] Time since system start uint64 timestamp # [us] Time since system start
float32 throttle_body_x # [] [@range -1 (Backwards), 1 (Forwards)] [@frame Body] Throttle setpoint along body X axis float32 throttle_body_x # [-] [@range -1 (Backwards), 1 (Forwards)] [@frame Body] Throttle setpoint along body X axis
float32 throttle_body_y # [] [@range -1 (Left), 1 (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Throttle setpoint along body Y axis float32 throttle_body_y # [-] [@range -1 (Left), 1 (Right)] [@frame Body] [@invalid NaN If not mecanum] Mecanum only: Throttle setpoint along body Y axis